Search Results

Search found 25872 results on 1035 pages for 'document security'.

Page 565/1035 | < Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >

• windows firewall and network location switch after establishing a vpn connection

  - by Konrads

  I am looking for a reasonable solution for network location switching after VPN connection is established for Windows 7. The scenario is as follows: For location public (employee plugging in his laptop in hotel, public wi-fi,etc) all inbound connections are restricted, only outbound VPN + www is enabled. Employee then initiates a VPN connection, VPN pushes routes to 10.0.0.0/8 subnet Now I would like to have lax security rules for traffic from/to 10.0.0.0/8 that comes through the VPN interface, while still protecting the laptop from traffic that comes via uplink interface as if it was private. How to achieve this switching and duality? One option I see is switching to IPSec...

  Read the article

• Error- D:\ is not accessible. Access is denied

  - by Aaron

  All of the sudden the D drive gives me an error when I try to open it: D:\ is not accessible. Access is denied. I have files on the drive that I would like to recover, so I do not want to reformat the drive. It acts almost like the computer doesn't recognize the drive. I have a feeling it's something with security settings, I may have accidentally changed something on the drive. I'm running on a Acer Aspire laptop on Windows Vista, SP2. I beleive both the C and the D drive run off of the same disk drive. At least that's all the Device Manager shows. So correct me if I'm wrong, but that would make it a partitioned drive.

  Read the article

• help setting up an IPSEC vpn from my linux box

  - by robthewolf

  I have an office with a router and a remote server (Linux - Ubuntu 10.10). Both locations need to connect to a data supplier through a VPN. The VPN is an IPSEC gateway. I was able to configure my Linksys rv42 router to create a VPN connection successfully and now I need to do the same for Linux server. I have been messing around with this for too long. First I tried OpenVPN, but that is SSL and not IPSEC. Then I tried Shrew. I think I have the settings correct but I haven't been able to create the connection. It maybe that I have to use something else like a direct IPSEC config or something like that. If someone knows of a way to turn the following settings that I have been given below into a working IPSEC VPN connection I would be very grateful. Here are the settings I was given that must be used to connect to my supplier: Local destination network: 192.168.4.0/24 Local destination hosts: 192.168.4.100 Remote destination network: 192.167.40.0/24 Remote destination hosts: 192.168.40.27 VPN peering point: xxx.xxx.xxx.xxx Then they have given me the following details: IPSEC/ISAKMP Phase 1 Parameters: Authentication method: pre shared secret Diffie Hellman group: group 2 Encryption Algorithm: 3DES Lifetime in seconds:28800 Phase 2 parameters: IPSEC security: ESP Encryption algortims: 3DES Authentication algorithms: MD5 lifetime in seconds: 28800 pfs: disabled Here are the settings from my attempt to use shrew: n:version:2 n:network-ike-port:500 n:network-mtu-size:1380 n:client-addr-auto:0 n:network-frag-size:540 n:network-dpd-enable:1 n:network-notify-enable:1 n:client-banner-enable:1 n:client-dns-used:1 b:auth-mutual-psk:YjJzN2QzdDhyN2EyZDNpNG42ZzQ= n:phase1-dhgroup:2 n:phase1-keylen:0 n:phase1-life-secs:28800 n:phase1-life-kbytes:0 n:vendor-chkpt-enable:0 n:phase2-keylen:0 n:phase2-pfsgroup:-1 n:phase2-life-secs:28800 n:phase2-life-kbytes:0 n:policy-nailed:0 n:policy-list-auto:1 n:client-dns-auto:1 n:network-natt-port:4500 n:network-natt-rate:15 s:client-dns-addr:0.0.0.0 s:client-dns-suffix: s:network-host:xxx.xxx.xxx.xxx s:client-auto-mode:pull s:client-iface:virtual s:client-ip-addr:192.168.4.0 s:client-ip-mask:255.255.255.0 s:network-natt-mode:enable s:network-frag-mode:disable s:auth-method:mutual-psk s:ident-client-type:address s:ident-client-data:192.168.4.0 s:ident-server-type:address s:ident-server-data:192.168.40.0 s:phase1-exchange:aggressive s:phase1-cipher:3des s:phase1-hash:md5 s:phase2-transform:3des s:phase2-hmac:md5 s:ipcomp-transform:disabled Finally here is the debug output from the shrew log: 10/12/22 17:22:18 ii : ipc client process thread begin ... 10/12/22 17:22:18 < A : peer config add message 10/12/22 17:22:18 DB : peer added ( obj count = 1 ) 10/12/22 17:22:18 ii : local address 217.xxx.xxx.xxx selected for peer 10/12/22 17:22:18 DB : tunnel added ( obj count = 1 ) 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : proposal config message 10/12/22 17:22:18 < A : client config message 10/12/22 17:22:18 < A : local id '192.168.4.0' message 10/12/22 17:22:18 < A : remote id '192.168.40.0' message 10/12/22 17:22:18 < A : preshared key message 10/12/22 17:22:18 < A : peer tunnel enable message 10/12/22 17:22:18 DB : new phase1 ( ISAKMP initiator ) 10/12/22 17:22:18 DB : exchange type is aggressive 10/12/22 17:22:18 DB : 217.xxx.xxx.xxx:500 <- 206.xxx.xxx.xxx:500 10/12/22 17:22:18 DB : c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 DB : phase1 added ( obj count = 1 ) 10/12/22 17:22:18 : security association payload 10/12/22 17:22:18 : - proposal #1 payload 10/12/22 17:22:18 : -- transform #1 payload 10/12/22 17:22:18 : key exchange payload 10/12/22 17:22:18 : nonce payload 10/12/22 17:22:18 : identification payload 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v00 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v01 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v02 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( draft v03 ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports nat-t ( rfc ) 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local supports DPDv1 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SHREW SOFT compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is NETSCREEN compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is SIDEWINDER compatible 10/12/22 17:22:18 : vendor id payload 10/12/22 17:22:18 ii : local is CISCO UNITY compatible 10/12/22 17:22:18 = : cookies c1a8b31ac860995d:0000000000000000 10/12/22 17:22:18 = : message 00000000 10/12/22 17:22:18 - : send IKE packet 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 ( 484 bytes ) 10/12/22 17:22:18 DB : phase1 resend event scheduled ( ref count = 2 ) 10/12/22 17:22:18 ii : opened tap device tap0 10/12/22 17:22:28 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:38 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:48 - : resend 1 phase1 packet(s) 217.xxx.xxx.xxx:500 - 206.xxx.xxx.xxx:500 10/12/22 17:22:58 ii : resend limit exceeded for phase1 exchange 10/12/22 17:22:58 ii : phase1 removal before expire time 10/12/22 17:22:58 DB : phase1 deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : closed tap device tap0 10/12/22 17:22:58 DB : tunnel stats event canceled ( ref count = 1 ) 10/12/22 17:22:58 DB : removing tunnel config references 10/12/22 17:22:58 DB : removing tunnel phase2 references 10/12/22 17:22:58 DB : removing tunnel phase1 references 10/12/22 17:22:58 DB : tunnel deleted ( obj count = 0 ) 10/12/22 17:22:58 DB : removing all peer tunnel refrences 10/12/22 17:22:58 DB : peer deleted ( obj count = 0 ) 10/12/22 17:22:58 ii : ipc client process thread exit ...

  Read the article

• GDM login screen is not displayed with VNC

  - by niboshi

  Hi, I set up VNC server with xinetd. Also configured GDM so that XDMCP is enabled. VNC connection seems okay, but GDM login screen is not shown. Instead I can only see old bare X screen (gray meshed background and X-shaped mouse pointer), which I can't do any interaction with it. What can I do to fix the problem? No log is written below /var/log/. Server distribution: Ubuntu marverick /etc/xinetd.d/vnc is like below: service vnc1024 { disable = no socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -geometry 1024x768 -depth 24 -once securitytypes=none port = 12345 } /etc/gdm/custom.conf: [daemon] [security] DisallowTCP=false [xdmcp] Enable=true [gui] [greeter] [chooser] [debug] [servers] /etc/services is also configured. Thanks

  Read the article

• MySQL open files limit

  - by Brian

  This question is similar to set open_files_limit, but there was no good answer. I need to increase my table_open_cache, but first I need to increase the open_files_limit. I set the option in /etc/mysql/my.cnf: open-files-limit = 8192 This worked fine in my previous install (Ubuntu 8.04), but now in Ubuntu 10.04, when I start the server up, open_files_limit is reported to be 1710. That seems like a pretty random number for the limit to be clipped to. Anyway, I tried getting around it by adding a line like this in /etc/security/limits.conf: mysql hard nofile 8192 I also tried adding this to the pre-start script in mysql's upstart config (/etc/init/mysql.conf): ulimit -n 8192 Obviously neither of those things worked. So where is the hoop that has been added between Ubuntu 8.04 and 10.04 through which I must jump in order to actually increase the open files limit?

  Read the article

• $RYSNC_PASSWORD not being read/responded-to correctly (Snow Leopard)

  - by warren

  Ignoring the security issues, I have the following script that synchronizes my music library from my MacBook Pro (running Snow Leopard) to the file store (CentOS 4) on my network: rsync -rav --progress --partial -e "ssh" ~/Music/iTunes/* user@scramasax:~/music/iTunes-scissor:~ When I try to use either a password provided on the command-line (), in a password file (--password-file), or in the environment variable RSYNC_PASSWORD, the login still goes interactive, requiring me to type my password again. I will be moving to pre-shared keys on my network, but in situations where that is not possible, such as rsync'ing files to a webserver, being able to successfully embed the password in the script would be very helpful.

  Read the article

• Eventtriggers frequence

  - by holian

  Masters, I try to set some event task on windows server 2003. I use this tutorial: http://www.petri.co.il/how-to-use-eventtriggersexe-to-send-e-mail-based-on-event-ids.htm My problem is when i set an event for example "If Event Id 528 in the security log, than send an e-mail.", then the eventrigger fire up the task continously, and i get the mail over and over. Any suggestion how to set eventriggers.exe to send e-mail once after the event occure in the event log? Thank you.

  Read the article

• Strange email coming from/to my computer

  - by Micah

  I'm running smtp4dev on my machine to trap anything going in/out of my computer on port 25 for testing purposes. Every so often this email gets trapped and I have no idea what it's from. I have Microsoft Security Essentials running on my machine and it hasn't identified and viruses or anything so I'm not sure what's going on. Here's the content of the message: Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Received: from [125.180.72.4] by 173.162.7.130 SMTP id O2Ncv62Ghig1vR for <[email protected]>; Fri, 24 Jun 2011 20:36:15 +0200 Message-ID: <[email protected]> From: "" <[email protected]> To: <[email protected]> Subject: BC_173.162.7.130 Date: Fri, 24 Jun 11 20:36:15 GMT MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000D_01C2CC60.49F4EC70"

  Read the article

• Is there a command line two-factor authentication verification code generator?

  - by dan

  I manage a server with two-factor authentication. I have to use the Google Authenticator iPhone app to get the 6-digit verification code to enter after entering the normal server password. The setup is described here: http://www.mnxsolutions.com/security/two-factor-ssh-with-google-authenticator.html I would like a way to get the verification code using just my laptop and not from my iphone. There must be a way to seed a command line app that generates these verification codes and gives you the code for the current 30-second window. Is there a program that can do this?

  Read the article

• Unable to delete a directory from NTFS drive: "Access is deined"

  - by Evgeny

  I'm running Windows XP Pro x64 SP2. I have a directory on an NTFS drive that was created by a Maven build. A subsequent build attempted to delete this directory and failed. I now get the error "Access is denied" whenever I try to do anything with that directory: change to it, delete it, rename it. This happens both in Windows Explorer and from a command prompt. The properties dialog in Windows Explorer doesn't even contain the Security tab. I created the directory, so I don't think this is truly a permissions issue. I've occasionally had this error happen in the past is well. I believe the error is misleading, but the question is: what is the real problem and how do I fix it?

  Read the article

• Pgpool-regclass gives error when installling

  - by user119720

  I have a problem when installing the pgpool-regclass. When I'm running 'Make',it shows me this kind of error : p,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -I/usr/include/et -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I. -I. -I/usr/pgsql-9.2/include/server -I/usr/pgsql-9.2/include/internal -I/usr/include/et -D_GNU_SOURCE -I/usr/include/libxml2 -I/usr/include -c -o pgpool-regclass.o pgpool-regclass.c pgpool-regclass.c:99:37: error: macro "RangeVarGetRelid" requires 3 arguments, but only 2 given pgpool-regclass.c: In function âpgpool_regclassâ: pgpool-regclass.c:99: error: âRangeVarGetRelidâ undeclared (first use in this function) pgpool-regclass.c:99: error: (Each undeclared identifier is reported only once pgpool-regclass.c:99: error: for each function it appears in.) make: *** [pgpool-regclass.o] Error 1 Can anyone help me to sort this things out?I really appreciate it. Thanks.

  Read the article

• Windows Authentication Website Asking for Credentials

  - by ChrisHDog

  I have a website that has ASP.Net Impersonation Enabled and Windows Authentication Enabled. When navigating to that site using IE8 with "Enable Integrated Windows Authentication" (under Tools - Internet Options - Advanced) checked, the browser pops-up a "Windows Security" dialog box asking for User name and Password. My understanding was that this was automatically passed through and I would not need to type in those details. Additional Information: If I uncheck "Enable Integrated Windows Authentication" I do not get the pop-up window and it appears to work was intended (though that is the opposite of what I would be expecting) If I enable Windows Authentication in Firefox I do not get the pop-up window (i.e. works as intended) Are there some settings or similar that could have been set to create this behavior? Or has anyone else seen similar behavior and know how to fix?

  Read the article

• Recommendations needed for email server and file sharing solutions.

  - by Abeansits

  I work at a relatively small company, around 30 people and we are now looking into a solution that can handle: File sharing. Email server. Calendar support. Around 30 users. Accessible from external network. Support for Windows XP (and above), Mac OS 10.6.3 and Ubuntu clients. When it comes down to security we don't have the experience to comment on that. I guess the de facto standard is good enough for us. Sorry if this is formulated as a n00b question, because it is. =) Any kind of pointer in the right direction will be appreciated. Thanks in advance! //Abean

  Read the article

• Outlook 2010 exchange setup prompts for [email protected] rather than [email protected]

  - by Force Flow

  We use a hosted exchange service. When users want to set up Outlook 2010 to access their account, they open Outlook and run through the configuration steps. Autodiscover is enabled, and in the user's active directory profile, their email address is in the email field. However, when the configuration process reaches a point where they are prompted for their email account's username and password, their active directory username is filled in by default instead of their email address. Is there a way to fix that? Users get confused and try to enter their email password over and over again and wonder why it doesn't work (and completely miss/ignore the "use another account" button even though they have instructions right in front of them). I'm also using the Office 2010 ADM's in group policy, but I haven't yet seen an option to specify what gets auto-populated in that windows security prompt.

  Read the article

• Can I automatically login to ssh using passwords from OS X keychain?

  - by Chaitanya Gupta

  I need to login to an ssh server which doesn't support key based authentication. And I don't want to type the passwords every time. I am using OS X Lion (10.7.2). I have added the passwords to the OS X keychain[1]. Now I can retrieve the password automatically from the keychain using /usr/bin/security, however I can't find a way to send this password to the ssh prompt. I also tried sshpass. However when I try to run it ssh exits with the following error: ssh_askpass: exec(/usr/libexec/ssh-askpass): No such file or directory Permission denied, please try again. ssh_askpass: exec(/usr/libexec/ssh-askpass): No such file or directory Permission denied, please try again. ssh_askpass: exec(/usr/libexec/ssh-askpass): No such file or directory Permission denied (publickey,password). Is there anyway I can login to this server without having to enter the password every time? Notes The scheme I use in keychain looks like this Kind: Internet password Account: username Where: ssh://server-name

  Read the article

• Need to get a list of all users within a subnet of servers

  - by mikedopp

  I am looking to write a batch or vbs script to gather all users (local to the server. ie. administrators or a local account(not ad users)) on a collection of servers inside my network. I assume I could do this by subnet. Could even put the server names into a csv text file for the script to read from and report back to. Lots to ask. I would use net user however I run into local access only. Ideas? Or too many security walls to work?

  Read the article

• What's the equivalent of Wevtutil in XP or 2003?

  - by Matt

  I have a batch file for saving event logs to our shared drive. I want to do this for XP and Server 2003 without very much effort. What could I use since Wevtutil is only on Vista and up? rem Script start here rem Timestamp Generator set BACKUP_PATH=\\shared-drive\it\Temp\Event-Logs\ rem Parse the date (e.g., Thu 02/28/2013) set cur_yyyy=%date:~10,4% set cur_mm=%date:~4,2% set cur_dd=%date:~7,2% rem Parse the time (e.g., 11:20:56.39) set cur_hh=%time:~0,2% if %cur_hh% lss 10 (set cur_hh=0%time:~1,1%) set cur_nn=%time:~3,2% set cur_ss=%time:~6,2% set cur_ms=%time:~9,2% rem Set the timestamp format set timestamp=%cur_yyyy%%cur_mm%%cur_dd%-%cur_hh%%cur_nn%%cur_ss%%cur_ms% rem Set the computername format set servname=%computername% wevtutil epl System %BACKUP_PATH%\%servname%_%timestamp%_system.evtx wevtutil epl Application %BACKUP_PATH%\%servname%_%timestamp%_application.evtx wevtutil epl Security %BACKUP_PATH%\%servname%_%timestamp%_security.evtx rem End of Script

  Read the article

• The session setup from the computer <computerName> failed to authenticate.

  - by TheCodeMonk

  Every once in a while, I get a client PC that won't be able to log into the domain. This morning it was telling us that the trust relationship between the pc and the domain failed. I checked the event logs on the primary domain controller and I see this for 2 PCs (the one that had the problem and one that can log in today). The session setup from the computer failed to authenticate. The name(s) of the account(s) referenced in the security database is . The following error occurred: Access is denied. I know how to fix this, by rejoining the PC to the domain... But why does this happen and how can I prevent it so I don't have to keep rejoining PCs to the domain?

  Read the article

• Best and Proper Permissions Settings for Directory

  - by Dr. DOT

  I am interested in knowing the proper, yet security-conscious settings for a directory. Here's my scenario: I have a username for FTP access to my server called "user". For the purpose of the scenario, PHP runs as "nobody" on my server. I have a directory off the document root called "sample". The "sample" directory is chmod'd at 0755 (drwxr-xr-x) "Sample" is owned by "user" and the group is set to "user" The above is all very straight forward and standard. So I want to have a script be able to create (mkdir) and delete (rmdir) directories under "sample". Yet, I don't want to obviously overly expose my server by opening up the permissions (I could easily chmod sample to 0777 and make it world write-able). What is the best combination of permissions, owner settings and/or group settings to allow my script to create and delete directories under "sample" while retaining the ability for "user" to continue to FTP into the directory? Thanks.

  Read the article

• gcc sandboxing tool - AppArmor / CHROOT jail on Ubuntu 12.04

  - by StuR

  We have a Node application as the front end to a C++ sandboxing tool, which compiles code using gcc and outputs the result to the browser. e.g. exec("gcc -o /tmp/test /tmp/test.cpp", function (error, stdout, stderr) { if(!stderr) { execFile('/tmp/test', function(error, stdout, stderr) {}); } }); This works fine. However, as you can imagine this is a security nightmare if it were to be made public - so I was thinking of two options to protect my stack: 1) A CHROOT jail - but this in itself wouldn't be enough to prevent directory traversal / file access. 2) AppArmor ? So my question is really, how could I protect my stack from any nasties that could come from: A) Compiling unknown code using gcc B) Executing the compiled code

  Read the article

• Getting 0x80070043 error when accessing Samba share from Windows 7

  - by FelixM

  I created a Samba share on my new Ubuntu 10.04 machine. When I try to access it from a Windows 7 client, I get network error 0x80070043 (The network path not found). However, I get this error when I click on the share in the Windows Explorer, so it seems that Windows does find the path. I already enabled NTLMv1, disabled 128bit security and made sure that NetBIOS is running. I briefly disabled the Windows firewall, it didn't make a difference. What could be the problem?

  Read the article

• Windows Malicious Software Removal Tool log says it can't do all required actions. Should I be conce

  - by Tom

  Here's what the log file c:/Windows/debug/mrt.log of my Windows 7 install says: WARNING: Security policy doesn't allow for all actions MSRT may require. ->Scan ERROR: resource process://pid:6080 (code 0x00000005 (5)) ->Scan ERROR: resource process://pid:5300 (code 0x00000057 (87)) ->Scan ERROR: resource process://pid:3512 (code 0x00000057 (87)) I use the default setup. I didn't change anything. This is the first time I checked the log file and this warning is in there from the start. Can I do something about it? Or I shouldn't be concerned, because it can do everything what's necessary anyway? Do you have this warning in your logfile?

  Read the article

• How Do I Disable URL Pre-Pending in the FireFox 3 Title Bar When Opeing A New Window With JavaScript

  - by N Rahl

  For (understandable) security reasons, Firefox does not allow JavaScript to open a new window without the address/location bar AND without pre-pending the page's URL to the title in the title bar. For example, when you set: <title>My Site</title> in the header, and open the page using location=no FireFox changes the header to read: http://www.mysite.com - My Site - Mozilla Firefox. I would like it to simply say: My Site Everything I've read suggests this behaviour can't be altered with scripting, and as such, this is not a scripting question. What I would like to know is, which setting(s) can I change in the browser itself to disable URL pre-pending to the title of new windows? This is for a company Intranet, and I control all of the computers/browsers that connect to the application.

  Read the article

• Why does my computer slow down so much when attaching Bluetooth dongle?

  - by Jeff Yates

  I have a Bluetooth dongle and I plugged it into my work laptop (a Dell Latitude D830). Windows detects the Generic Bluetooth USB or similar and then proceeds to go incredibly slow with a process, avp.exe¹, taking 50% CPU. The System Idle process is getting most of the other 50% CPU and the avp.exe process is only at Normal priority. The machine doesn't seem to recover, so I had to turn the power off and reboot. Now, I haven't installed the drivers yet for the device, which I am doing now and I expect it to resolve the problem, so I am not asking how to fix this. I would rather know why Windows goes so slow in the first place. What is it trying to do and failing at so badly that it barely crawls? ¹ Part of Kaspersky Internet Security suite

  Read the article

• non-interactively upload file to sftp server, using password

  - by matt

  Hello Guys, I know, this is not the recommended way to do this. But, I do not have another choice: I've got to set up a cron job that will regularly upload a file to an external SFTP Server (no FTP available, and I do only have a username/password for it but no key.) Still, I need to set up a cron that will regularly connect to that sftp and upload a file. sftp <<EOF put filename exit EOF therefore will not work, because sftp asks for the password, before STDIN is evaluated. What can I do, to pass the Password to sftp? Again: I am aware of the potential security risk, but I really do not have any choice here, and the server from which the file is uploaded is protected rather well.

  Read the article

< Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >