Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 565/1211 | < Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >

• Start tomcat webapp with root privileges

  - by Hagay Myr

  I built a webapp that uses libpcap (via jpcap). In order to be able to get the network interfaces list or to bind to a network interface, the application (in this case a webaap that runs from tomcat server) must be running with root privileges. During development I simply ran Eclipse with root privileges (sudo eclipse) and my webapp worked just fine with Eclipse's local tomcat server. However, when I try to deploy my webapp to the "real" tomcat server, it isn't working. I Also tried to start the tomcat6 service with sudo and changed the TOMCAT6_USER definition (defined in /etc/init.d/tomcat6) from "tomcat6" to "root" but it made no difference. What should I do to make it work?

  Read the article

• Getting 0x80070043 error when accessing Samba share from Windows 7

  - by FelixM

  I created a Samba share on my new Ubuntu 10.04 machine. When I try to access it from a Windows 7 client, I get network error 0x80070043 (The network path not found). However, I get this error when I click on the share in the Windows Explorer, so it seems that Windows does find the path. I already enabled NTLMv1, disabled 128bit security and made sure that NetBIOS is running. I briefly disabled the Windows firewall, it didn't make a difference. What could be the problem?

  Read the article

• How to list pages in a category as bullet points in MediaWiki?

  - by Sandra Schlichting

  I'm using MediaWiki and I would like to list pages with a specific tag in alphabetical order. I.e. If the following 5 pages have the category "Backup" I would get a list similar to Printing Programming Remote Access Remote Sound Smartcard DynamicPageList with <DynamicPageList> category = Backup </DynamicPageList> gives me what I am looking for, but not in alphabetical order based on page title. Does anyone know how to do this?

  Read the article

• Web Development Environment: How to distribute edited hosts files over bunch of mac machines?

  - by Alex Reds

  I am doing some research to prepare some web development environment for our small(10ppl and growing) new office. User Case: For each new web project usually we create new alias on an Apache server someproject.companywebsite From my understanding in order to see this website locally for all the rest of our team(including mangers and directors) they will need to edit hosts file (e.g. "192.168.1.10 someproject.companywebsite"), and like that each time for a new project(can be 2-5 each week) Solution: And I looking for a solution how to edit this hosts file only once and distribute it over all mac machines in our network at once or much more flawlessly than poking around with each machine every time over and over again. Is that possible? Or that a very wrong way of doing that? Perhaps we better set up own local dns server and point to it our router? Though own dns server a bit concerns me because of might be some network interruption and others lags, if you know what I mean. Or perhaps there are another workflows for that? What's the best way for such things? So I'll be so grateful to hear some advices from experienced admins. I couldn't find that info on internet, so if you know where to read about it, point me in a right direction. Thank you in advance Alex

  Read the article

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• Clojure: Immutability at the Language Level

  At the heart of Clojure programming language is a powerful set of immutable, persistent collection types. Get a deep dive into a couple of them.

  Read the article

• Clojure: Immutability at the Language Level

  At the heart of Clojure programming language is a powerful set of immutable, persistent collection types. Get a deep dive into a couple of them.

  Read the article

• Clojure: Immutability at the Language Level

  At the heart of Clojure programming language is a powerful set of immutable, persistent collection types. Get a deep dive into a couple of them.

  Read the article

• Clojure: Immutability at the Language Level

  At the heart of Clojure programming language is a powerful set of immutable, persistent collection types. Get a deep dive into a couple of them.

  Read the article

• Isn't MVC anti OOP?

  - by m3th0dman

  The main idea behind OOP is to unify data and behavior in a single entity - the object. In procedural programming there is data and separately algorithms modifying the data. In the Model-View-Controller pattern the data and the logic/algorithms are placed in distinct entities, the model and the controller respectively. In an equivalent OOP approach shouldn't the model and the controller be placed in the same logical entity?

  Read the article

• configuring USB modem( Huawei EC156) in ubuntu 13.10

  - by user205427

  I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan Tao

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

  - by Ranjith Kumar

  In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

  Read the article

• How to cache streaming video and silverlight with squid windows reverse proxy

  - by V. Romanov

  We have an intranet web server running a silverlight application (ACTUS media monitor if anyone cares to know). The server is used to record video and stream it to clients through a CDN solution. We want to put a reverse proxy in between the server and CDN provider in order to remove the office network bottleneck that's currently strangling us. I've set up SQUID for windows on a separate machine outside the network using squid BasicAccelerator configuration setting. It seems to work as far as the reverse proxy is concerned, requests are forwarded and the application is working but it doesn't seem to cache anything (no space is used on the drive where squid is installed). I found to explicit setting to turn caching on in squid, so i assume it's on by default. Perhaps I need some other trick to make the video and/or silverlight cacheable? Any help will be appreciated. Any info you need to help me will be provided at once. Thanks in advance!

  Read the article

• OpenVPN bridged not pinging beyond openvpn server on Ubuntu/Windows 2003

  - by ani

  I set up an OpenVPN server using Ubuntu and a windows server 2003 client to interconnect two networks between two different offices. They can now ping each other, but the rest of the network cannot be contacted by the windows client. Office 1 has internal network of: 192.168.0.0 255.255.240.0 Office 2 has internal network of: 192.168.16.0 255.255.255.0 And the configuration files are: Server.conf port 1194 --script-security 2 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" # TCP or UDP server? ;proto tcp proto udp dev tap0 ;dev tun ca ca.crt cert openvpn.crt key openvpn.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.0.59 255.255.240.0 192.168.6.72 192.168.6.75 push "route 192.168.0.0 255.255.240.0" push "dhcp-option DNS 192.168.0.2" push "dhcp-option DOMAIN testeers.local" keepalive 10 120 tls-auth ta.key 0 # This file is secret comp-lzo user nobody group nogroup persist-key persist-tun log /var/log/openvpn/openvpn.log status /var/log/openvpn-status.log verb 3 Client Config file client dev tap ;dev tun --script-security 2 ;proto tcp proto udp remote 1xx.2xx.xxx.124 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert admin-VAIO.crt key admin-VAIO.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 Ifconfig on the server now shows the following: br0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 inet addr:192.168.0.59 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::250:56ff:fe8b:1a49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1081860 errors:0 dropped:1358 overruns:0 frame:0 TX packets:242385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76600615 (76.6 MB) TX bytes:64474575 (64.4 MB) eth0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1144125 errors:0 dropped:7172 overruns:0 frame:0 TX packets:252486 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:109893729 (109.8 MB) TX bytes:66372620 (66.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:67865 errors:0 dropped:0 overruns:0 frame:0 TX packets:67865 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5183276 (5.1 MB) TX bytes:5183276 (5.1 MB) tap0 Link encap:Ethernet HWaddr 32:4f:42:11:b7:c5 inet6 addr: fe80::304f:42ff:fe11:b7c5/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3329 errors:0 dropped:0 overruns:0 frame:0 TX packets:215472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:373205 (373.2 KB) TX bytes:17465832 (17.4 MB)

  Read the article

• Increase backup speed, Backup Exec 2010 - QNAP TS419U+ NAS

  - by user99912

  We have a QNAP NAS and the network shares are being backed up by Backup Exec 2010 over SMB. We can't install the remote agent on the NAS as it has an ARM processor and, as far as I am aware, there is no compatible agent. Do you have any suggestions on any faster method of backing up these shares as opposed to the current scenario? Currently the network bandwidth is not the issue, it seems that this access method is just not able to go any quicker. We've also added the NAS shares to the start of the selection list, but we're still running into 18 hours total backup time (total amount of data on the NAS is roughly 650GB). Any comments and/or suggestions welcome. EDIT: Data is being pulled from the NAS by Backup Exec to a LTO4 tape drive

  Read the article

• Windows DHCP Server - get notification when a non-AD joined device gets an IP address

  - by TheCleaner

  SCENARIO To simplify this down to it's easiest example: I have a Windows 2008 R2 standard DC with the DHCP server role. It hands out IPs via various IPv4 scopes, no problem there. WHAT I'D LIKE I would like a way to create a notification/eventlog entry/similar whenever a device gets a DHCP address lease and that device IS NOT a domain joined computer in Active Directory. It doesn't matter to me whether it is custom Powershell, etc. Bottom line = I'd like a way to know when non-domain devices are on the network without using 802.1X at the moment. I know this won't account for static IP devices. I do have monitoring software that will scan the network and find devices, but it isn't quite this granular in detail. RESEARCH DONE/OPTIONS CONSIDERED I don't see any such possibilities with the built in logging. Yes, I'm aware of 802.1X and have the ability to implement it long-term at this location but we are some time away from a project like that, and while that would solve network authentication issues, this is still helpful to me outside of 802.1X goals. I've looked around for some script bits, etc. that might prove useful but the things I'm finding lead me to believe that my google-fu is failing me at the moment. I believe the below logic is sound (assuming there isn't some existing solution): Device receives DHCP address Event log entry is recorded (event ID 10 in the DHCP audit log should work (since a new lease is what I'd be most interested in, not renewals): http://technet.microsoft.com/en-us/library/dd759178.aspx) At this point a script of some kind would probably have to take over for the remaining "STEPS" below. Somehow query this DHCP log for these event ID 10's (I would love push, but I'm guessing pull is the only recourse here) Parse the query for the name of the device being assigned the new lease Query AD for the device's name IF not found in AD, send a notification email If anyone has any ideas on how to properly do this, I'd really appreciate it. I'm not looking for a "gimme the codez" but would love to know if there are alternatives to the above list or if I'm not thinking clear and another method exists for gathering this information. If you have code snippets/PS commands you'd like to share to help accomplish this, all the better.

  Read the article

• Equation solver project

  - by Victor Barbu

  I would like to start a project destinated to students. My application has to solve any kind of equation, passed by the user as a string, exactly like in Matlab solve function. How shluld I do this? What programming language is the best for this purpose? Thanks in advance. P.S This is a screenshot made in Matlab. This is how I would like the user to insert and receive the answer: Another example:

  Read the article

• Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

  - by Nakedible

  I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

  Read the article

• Get source and destination of outbound traffic in pfSense

  - by maxsilver

  I'm looking at the traffic graph in pfSense (Version 1.2.2), which we're using as a router / NAT / ect on our network. Recently, I'm seeing a sudden, constant spike of 15 - 30kbps traffic outbound, that is unusual for our network (normally its below 2kbps, we're mostly all inbound traffic) Is there any way to determine what the source of this traffic is, or where it's going? (Just an internal IP address for source, and external IP address for destination would be all I need) I've already tried switching the traffic graph to 'LAN' and watching the host list on the right side, but it seems ... flakey. The numbers it shows seem to fade in and out at random, and the values never add up to anywhere near the graph values. I'm not allowed to post the image, but a photo is available at - http://imgur.com/QYjKI.png

  Read the article

• Why&rsquo;s Poignant Guide To Ruby

  - by Liam McLennan

  According to Wikipedia, “why the lucky stiff was the persona of an anonymous, but prolific writer, cartoonist, musician, artist, and computer programmer”. He looks a bit like Jack Black. His book, Why’s Poignant Guide to Ruby, is a classic, though it can be hard to find since Why disappeared. If you want to learn the Ruby programming language I highly recommend Why’s Poignant Guide to Ruby. I am including a link here so that others who search for it may find it more easily.

  Read the article

• Cisco router for educational purposes

  - by user39214

  Hey all. I want to buy a Cisco router to use on my home network. I'm just hoping to get a unit that is not too old and is not a SOHO model. I want to run the latest Cisco OS just to learn how Cisco does things. I would use it to divide my network into two or three IP networks, firewalling, etc. I'm just asking for a model name/number. Thanks.

  Read the article

• Packages organisation with MVC design pattern

  - by Oltarus

  I have been programming quite a lot now and still can't decide which of these packages hierachies was the best: package1 Class1Controller Class1Model Class1View package2 Class2Controller Class2Model Class2View or controller Class1Controller Class2Contoller model Class1Model Class2Model view Class1View Class2View In other words, is it better to apply the MVC design pattern to classes or to packages? Is there any reason to choose one over the other? My question is language-agnostic, but I'm mostly a Java programmer, if it does any difference.

  Read the article

• "Play on another device" function not working with Samsung Allshare

  - by Tural Teyyuboglu

  Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

  Read the article

• Best sources to find your go-to programmer

  - by user66851

  After exhausting many resources, time, interviews etc, I cannot seem to find the correct programming talent for our company. Any other resources you suggest besides Dice, Linkedin, Craigslist, University Job Boards, Poaching techniques....its been months now! Specifically, we designed proprietary data-manipulation and data-gathering technology, and are looking for skilled programmers requiring skills of PHP5/MySQL, Javascript/HTML/CSS , cross-browser compatibility/optimization, web interface development, familiarity with source control (SVN or GIT), any L/AMP stack, and/or related application protocols, GCC-supported languages, Zend Framework and/or jQuery.

  Read the article

< Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >