Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 561/1211 | < Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >

• Can't communicate with Primary DNS Server

  - by horsley

  A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

  Read the article

• Can't connect to VPN in Windows XP mode

  - by darkstar13

  I have Windows 7 x32 installed on my laptop. I have also Windows XP mode installed. My setup is that my work-remote programs are in Windows XP mode because my VPN installer in Windows XP only. Lately, I have been having troubles getting on / logging in to VPN. I can access the internet in WinXP mode but When I ping the IP address of the target IP of my VPN network (or even just Google.com), I always get a 'Request Timeout'. However, when I ping the same IP address in command prompt in Windows 7, I get 100% data sent. Is there anything I need to adjust? Before, I have been able to connect instantly. Now, it's like trial and error, or I will have to wait for hours just to be able to enter logon credentials in Cisco VPN dialer. NAT is my network adapter in XP mode.

  Read the article

• Can I install Visual Studio 2012 without a virtual machine in Ubuntu?

  - by kamil

  I am trying to get visual studio working in Unity without using any virtual machine or other IDE alternatives. I am convinced Visual Studio is the ultimate IDE for .Net programming languages. I'm not necessarily for dual booting. I have been working more than 10 years on visual studio and I prefer it over other IDEs. I have tried other IDEs but they didin't work too well for me. Does anyone know a way to get this working natively?

  Read the article

• Snow Leopard: Optimization

  - by Shyam

  Hi, I have bunch of questions: I have a Mac network, which has five Mac's. Right now, they are individually getting software updates. Is there a way to download the patches/security updates in a single place (repository) and point all machines to this location? Personally, I have tools like Monolingual and Onyx, but are there tools you could recommend that affect the performance of the Operating System positively? Tweaks would be nice. Links and pointers, would be really appreciated. I've read about Time machine, is there a way to backup all machines to a network drive using this tool? Thanks!

  Read the article

• How to change 802.1x settings for Wireless in Windows XP SP3?

  - by mspoerr

  Hello, I want to configure EAP-TLS with Machine Authentication ONLY for a wireless network. The supplicant is the bulit-in supplicant in Windows XP SP3. I found the following document: http://support.microsoft.com/kb/929847 - How to enable computer-only authentication for a 802.1X-based network in Windows Vista, in Windows Server 2008, and in Windows XP Service Pack 3 But unforunately the needed command "netsh wlan" is not available in Windows XP - "Note Windows XP SP3 and earlier versions of Windows XP do not support the netsh wlan command." How can I change the settings without the "netsh wlan" command? Thanks, mspoerr

  Read the article

• Microsoft Access 2000 How To's Series

  Listen Software Solutions and author David Nishimoto present a new series designed to help Microsoft Access developers discover the secrets of Access programming and empower the developer with the critical knowledge needed to build enterprise-quality applications.

  Read the article

• Configuring NAT and static IP on Cisco 877W

  - by David M Williams

  Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

  Read the article

• Can't enable wireless lan on Fujitsu Siemens A1665G with Ubuntu 11.10 installed

  - by Theo

  I saw my old Notebook yesterday and wanted to make that work again. On Windows XP the wireless worked still fine. Then I installed new Ubuntu 11.10 32bit and I'm sadly not able to make the wireless enabled. [I replaced Win XP entirely] lspci lists following network: 08:0a.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) So after recommendation from this link I installed the b43 firmware module. iwconfig prints the following: wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associatd Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management: off As you can see, my wireless lan adapter is not turned on. sudo iwconfig wlan0 txpower auto Doesn't change anything. Then I tried to make it work with rfkill. rfkill list 0: phy0: Wirless LAN Soft blocked: no Hard blocked: yes sudo rfkill unblock all rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes remains the same. The question is now, how I could enable the hard blocked wireless LAN. There is no hardware switch for wlan integrated. However there is a button to change the state. I always thought this would be software sided, but it seems to make some hardware changes as well... The wireless LED is also not blinking (as it did on windows xp) I reset bios and searched for some settings in there, but it has only a few options and nothing to do with wireless settings, nothing works here.. At last I tried to install the acer hotkeys but I was not able to manage that. I installed the acerhkgui package, but in initializing progress, it was not able to compile acer hotkeys for my machine. There was a message that asm/linkage.h was not found while compiling. Do you have any ideas what I could do to make this hard blocked stuff disabled and my wireless card work? PS: I also tried sudo rm /dev/rfkill and a reboot to reinit that stuff... No success :(

  Read the article

• WARNING Retrying Bulk Insert for file:sqlldr due to Communication Error:256

  - by user702295

  WARNING Retrying Bulk Insert for file:sqlldr due to Communication Error:256 I am running my engine on Linux and am receiving an intermittent message "WARNING Retrying bulk insert for file: sqlldr due to communication Error: 256" The engine seems to have completed successfully, but it is not clear if this error caused some of the forecast to not complete. It is also not clear what caused the error. Generally if you see only the WARNING of it, it means that next retries of the same load request have eventually succeeded and so the run a a whole is not affected. In order to know more about what happens, look for .log/.bad files left in the engines bin directory or possibly a quote of them within the specific engine log that had the issue.  The sqlnet.log file may also have some information about it and perhaps at the database server side there may be some log/alert regarding what happened.  Look at the alert.log. In general it could be that the database server/network was over loaded at the time and somehow the connection was rejected/failed/aborted either due to specific setting on concurrent connections/sessions or inadvertently due to glitch in network/os/hardware. If this repeats and becomes more frequent during the run you should look further into it as mentioned above. You can also track this using either SQL*Trace or java.util.logging.  - Globally enable logging by setting the oracle.jdbc.Trace system property java -Doracle.jdbc.Trace=true - Client Side Tracing: Your SQLNET.ORA file should contain the following lines to produce a client side trace file: trace_level_client = 10 trace_unique_client = on trace_file_client = sqlnet.trc trace_directory_client = <path_to_trace_dir> Server Side Tracing: To enable server side tracing, use the following parameters: trace_level_server = 10 trace_file_server = server.trc trace_directory_server = <path_to_trace_dir> Tracing Levels: The following values can be used for TRACE_LEVEL* parameters:     16 or SUPPORT — WorldWide Customer Support trace information     10 or ADMIN — Administration trace information     4 or USER — User trace information     0 or OFF — no tracing, the default Additional information is readily available via the web.

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• SMB super slow within LAN between MAC and PC

  - by asdcasdc

  I have a windows desktop which stores all my movies, songs and pictures. I have a mac laptop which I would like to access these files. I don't want to utilize the FTP or SCP protocol because I don't want them to be downloaded to my mac. I want to access them as if they are a network mounted disk. So I tried using the native SMB protocol (available in Finder - Go - Connect to server). I tried dragging a file and dropping it onto my MAC's desktop. Surprisingly, I am only able to transfer at a very slow rate of about 1mb/s. Assuming network connectivity is not a problem, has anyone experienced incredible slowness with SMB? Are there alternative protocols for me to use in this case between PC and MAC?

  Read the article

• Clonezilla-SE with another DHCP Server in LAN

  - by aleroot

  I want to install Clonezilla-Server(192.168.1.100) in a network that already have a DHCP Server (dd-wrt with dnsmasq - 192.168.1.1). I've installed Clonezilla-SE on ubuntu Server 10.10, once installed and configured Clonezilla Server i've removed the DHCP-Server and set pxe server address in dnsmasq configuration on DHCP Server : dhcp-boot=pxelinux.0,,192.168.1.100 When i try to start from PXE a Computer in the network clonezilla start, but give me an error that the ipddress of the machine is not given by the clonezilla server and can't continue ... Someone has already tried to configure Clonezilla-SE in a similar enviroment? Is there some configuration on DRBL server of Clonezilla that i need to do ?

  Read the article

• Corporate Wiki Organization - Technical Documentation

  - by Dave Jarvis

  Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• windows 7 losing wired ethernet connection

  - by Brandon Grossutti

  i have a win 7 machine with an Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller with latest drivers, the machine is upto date with all latest fixes etc. I have it connecting to a WRT310Nv2 router. Seemingly random, win 7 disconnects from the "Home Network" says its in a "public network", then resets the connection to an illegal 169 address. I have tried static ips, dhcp, all with the same results. This seems to have started shortly after i installed Vuze, so I uninstalled it but the problem persists. I know that the router is sound given that I have an XP machine attached with no issues of connectivity at all. I am at a complete loss and have tried everything, pleasse tell me i'm not the only one.

  Read the article

• Configuring Transmission for faster download

  - by Luis Alvarado

  I have tested on the same PC with the same torrent/magnet links the following Torrent Clients: Transmission Ktorrent Deluge qBittorrent Vuze After 7 days of testing I noticed that the only one that took longer to start downloading and to keep an optimum/max download speed was Transmission. It was the slowest of them all to download the same torrents or magnet links which I tested 8 torrents and 4 magnet links from different sites and the one that took the most to start downloading or start after a pause/resume event. The other 4 just took less than 2 seconds for example to start downloading and to download the same content between 50% less time to 80% less time. I think that Transmission has the same capabilities about downloading/resuming than the other torrent clients but it may be because of some configuration I need to do to get the same speed and effect than the others. In my tests all torrent clients were tested with their default configurations. No changes were made. They were tested on the same PC, with the same network connection in the same time periods. So I am thinking that Transmission just needs a little bit of configuration tunning. I also set the ports for use to the same one for each. Checked the router for any blocking and anything related to the network. What options can I change to make it so Transmission resumes a download faster (grabs the seeds faster) and keeps a fast download all the time (Stays with the seeds that offer the best connection for example). Both of which by the look of it are features that the rest of the torrent clients do already.

  Read the article

• ASP.NET 3.5 Loop Control Structures Using Visual Basic

  Loop statements are one of the most important control structures in any programming language. Control structures are used to control or alter the flow of the program depending on a given situation. This article acquaints you with the most important loop statements and how to use them when developing ASP.NET web applications.... Microsoft Exchange Server 2010 Simplify Administration and Deployment of Messaging - Free Download.

  Read the article

• Proxmox 31 + KVM routing + IP subnet + csf

  - by KeyJey

  We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

  Read the article

• How to Become a Valuable Web Developer

  If you are new to web development and want to 'break into' the field then PHP is the programming language you should learn. There are many approaches to learning how to be a web developer, however, I believe the following approach makes the most sense.

  Read the article

• Aperture and networked drive: thinks images are offline

  - by AK

  I keep my photos on a networked drive (wireless), and they are referenced by Aperture. Aperture seems to not try very hard to look for this drive. Usually I have to open the network drive in Finder before opening Aperture -- otherwise it doesn't find the images and considers them offline. To me this seems like Aperture isn't willing to look on the network for the drive, unless it was helped along by pointing it out in Finder. It doesn't work if I start Aperture first and then navigate to the drive in Finder. What are some workarounds to making this functional? Is there a way to tell Aperture to look again without restarting the program?

  Read the article

• Can I turn my Mac Mini into a Wi-Fi Hotspot without additional tool

  - by user262325

  Hello everyone I have an app need to test via wifi. I just wonder if there is a way to turn my Mac Mini into a Wi-Fi Hotspot without additional tool. I try to setup airport new network name is"mymacmini'. My iPod Touch also can recognize the network "mymacmini". I set my iPod wifi as "mymacmini" But if I try to connect to Internet, Safari always reports failure and connnection with Wifi. I hope to know if I need purchase a wireless router for MAc Mini or there are something wrong I did above? Thanks interdev

  Read the article

• Windows 7 Computer Maintenance - Restore removed Desktop Shortcuts

  - by HaydnWVN

  I'm aware about the inbuilt nightmate 'tool' of Microsofts which is making every network administrators job a nightmare (if left turned on). In short it'll happily delete every desktop shortcut to a network resource. We have it disabled by default. My question is related to recovering these shortcuts, Windows doesn't seem to dump them into the Recycle Bin and although you can 'restore previous versions' of the Desktop folder, you are unable to do it with the user logged in... Rather a problem if you only have the 1 user account. We have a user who (although the 'Computer Maintenance' tool is turned off) had it come up in 'Action Centre' and chose to run it. I've been unable to reproduce it, but the tool has certainly run (and removed 24 shortcuts from her desktop) although it is still saying 'Windows is not checking your system for maintenance problems'. ?! Very fustrating! Any ideas if these shortcuts are backed up/moved elsewhere so i can easily find and restore them?

  Read the article

• What is the correct way to restart udev in Ubuntu?

  - by zerkms

  I've changed the name of my eth1 interface to eth0. How to ask udev now to re-read the config? service udev restart and udevadm control --reload-rules don't help. So is there any valid way except of rebooting? (yes, reboot helps with this issue) UPD: yes, I know I should prepend the commands with sudo, but either one I posted above changes nothing in ifconfig -a output: I still see eth1, not eth0. UPD 2: I just changed the NAME property of udev-rule line. Don't know any reason for this to be ineffective. There is no any error in executing of both commands I've posted above, but they just don't change actual interface name in ifconfig -a output. If I perform reboot - then interface name changes as expected. UPD 3: let I explain all the case better ;-) For development purposes I write some script that clones virtual machines (VirtualBox-driven) and pre-sets them up in some way. So I perform a command to clone VM, start it and as long as network interface MAC is changed - udev adds the second rule to network persistent rules. Right after machine is booted for the first time there are 2 rules: eth0, which does not exist, as long as it existed in the original VM image MAC eth1, which exists, but all the configuration in all files refers to eth0, so it is not that good for me So I with sed delete the line with eth0 (it is obsolete and useless in cloned image) and replace eth1 with eth0. So currently I have valid persistent rule, but there is still eth1 in /dev. The issue: I don't want to reboot the machine (it will take another time, which is not good thing on building-VM-stage) and just want to have my /dev rebuilt with some command so I have ready-to-use VM without any reboots.

  Read the article

• VPN or Remote Access?

  - by Craig Johnston

  In what circumstances would you setup a VPN instead of just allowing Remote Desktop to a machine in a network?

  Read the article

• T-SQL Tuesday #24 : Dude, where's the rest of my procedure?

  - by AaronBertrand

  This month's T-SQL Tuesday is being hosted by Brad Schulz ( blog ) and the topic is one that should attract a lot of submissions: Procedures and Functions. Last week, I talked about the case against INFORMATION_SCHEMA views - I provided several examples where I feel the INFORMATION_SCHEMA views fall short of the catalog views, and expressed my belief that you are better off programming consistently against the catalog views all the time, instead of only when the INFORMATION_SCHEMA views fail. Having...(read more)

  Read the article

< Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >