Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 566/761 | < Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >

• Putty freezes at random when logging into a remote machine in another continent

  - by vito

  I have to ssh to a remote machine in Europe from Asia every day for my work. But Putty freezes sometimes at totally random times and I have no choice but to close and re-open a new ssh session. It's frustrating especially when I'm editing something or executing a long running program. I know the question really doesn't have much details ('cause nothing seems to be wrong with the network at all). Has anyone experienced this sort of issue with Putty and had resolved it? Thanks for your time!

  Read the article

• Monitor Bonded Interface for Disconnection

  - by bradlis7

  I am trying to monitor for network failures on a machine, and one portion of that is to monitor interfaces that are intended to be active also be "RUNNING". An Ethernet port, such as eth0, will say "RUNNING" if it is physically connected to another device. The problem lies in the bonded interfaces, such as bond0. If all of the ethernet devices are disconnected, it still says that it is running, and it is still pingable. Is this by design, or is my system setup incorrectly? Does the miimon option have something to do with this?

  Read the article

• Hurry! See the uncensored OOW videos before they get edited!

  - by rickramsey

  source Uploaded so far: Which Oracle Solaris 11 Technologies Have Sysadmins Been Using Most? Director's Cut - Uncensored - Markus Flierl, VP Solaris Core Engineering, describes how Oracle Solaris 11 customers are taking advantage of the Image Packaging System and the snapshot capability of ZFS to run more frequent updates of not only the OS, but also the applications (agile development, anyone?), and how they're using the network virtualization capabilities in Oracle Solaris 11 to isolate applications and manage workloads on the cloud. Watch How Hybrid Columnar Compression Saves Storage Space Director's Cut - Uncensored - Art Licht shows how hyprid columnar compression (HCC) compresses data 30x without slowing down other queries that the database is performing. First he shows what happens when he runs database queries without HCC, then he shows what happens when he runs the queries with HCC. Security Capabilities and Design in Oracle Solaris 11 Director's Cut - Uncensored - Compliance reporting. Extended policy. Immutable zones. Three of the best minds in Oracle Solaris security explain what they are, what customers are doing with them, and how they were engineered. Filmed at Oracle Open World 2012. Why DTrace and Ksplice Have Made Oracle Linux 6 Popular with Sysadmins Use the DTrace scripts you wrote for Oracle Solaris on Oracle Linux without modification. Wim Coekaerts, VP of Engineering for Oracle Linux, explains how this capability of DTrace, the zero downtime updates enabled by KSplice, and other performance and stability enhancements have made Oracle Linux 6 popular with sysadmins. Why Solaris 11 Is Being Adopted Faster Than Solaris 10 Sneak Preview - Uncut Version - Lynn Rohrer, Director of Oracle Solaris Product Management explains why customers are adopting Oracle Solaris 11 at a faster rate than Oracle Solaris 10, and proves why you should never challenge a Montana woman to a test of strength. What Forsythe Corp Is Helping Its Customers Do With Oracle Solaris 11 Director's Cut - Unedited - Lee Diamante, Solutions Architect for Forsythe Corp, an Oracle Solaris Partner, explains why Forsythe has been recommending Oracle Solaris to its customers, and what those customers have been doing with it. Lots more to come ... - Rick Website Newsletter Facebook Twitter

  Read the article

• negative time for a ping echo reply

  - by Mario

  I was happily pinging in the net when suddenly: Pinging X with 32 bytes of data: Reply from .235: bytes=32 time=1444ms TTL=41 Reply from .235: bytes=32 time=1767ms TTL=41 Reply from .235: bytes=32 time=1531ms TTL=41 Reply from .235: bytes=32 time=-1198187ms TTL=41 Ping statistics for .235: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1444ms, Maximum = -1198187ms, Average = 1073443462ms A negative time for the reply. I checked wireshark and it had the same values: Time delta from previous displayed frame: -1198.187867000 seconds Time since reference or first frame: -1179.935038000 seconds I didn't change the time of the machine while pinging. This was made in my local network at home, from a XP VM in windows 7. So I blame the VM (virtualbox). But I was wondering if this strange behaviour (to me) could have a reason, or if any of you have seen this before. Thank you bye.

  Read the article

• How can I figure out exactly which process is keeping my Mac from going to sleep and waking it up?

  - by pattern86

  I have read this knowledgebase article, but would like to know if there's a way to tell exactly which process is causing my Mac not to follow the sleep schedule I have set in System Preferences Energy Saver. I have narrowed it down to a being a process and will explain why I think so (see below). I am running OS X (10.6.5) on the new iMac 27" and I am certain it's not the following: The "Wake for Network Access" checkbox in Energy Saver settings (has never been a previous issue) Peripherals (has never been a previous issue) Any active GUI application (all are closed) Additional USB/FireWire drives (none are connected) Bluetooth (it's off) Sharing services (has never been a previous issue) The symptoms are as follows: The computer doesn't go to sleep at the predetermined time. It will wake up some number of hours after being put manually to sleep (but not within the first few seconds/minutes.) Is there a specific string I should be looking for in Console? I have tried searching for "wake" and "sleep" but can't make total sense of the results.

  Read the article

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• Windows Login Failure

  - by Chris Bateson

  I'm getting an error in the Event Viewer, which is also generating a lot of Logon Failure messages on our syslog server. Pretty much stuck on how to resolve. EventID: 536 Logon Type: 3 Reason: The NetLogon component is not active This is for a Windows Server 2003 system. I have checked here We're using Shavlik Protect 9 to scan and deploy patches. Shavlik stores the credentials for the systems and uses those stored credentials to deploy patches. This system is able to scan and deploy to other systems on the network using those credentials and no errors are generated. When installing to the local system that Shavlik is physically on then this error is generated. Whats interesting is that it doesn't generate during a scan, and the patches install fine. We've contacted Shavlik to get the response that they are unable to help since it's a Microsoft error. Has anyone seen this?

  Read the article

• The Most Ridiculous Computer Cameos of All Time

  - by Jason Fitzpatrick

  For the last half century computers have played all sorts of major and minor roles in movies; check out this collection to see some of the more quirky and out-of-place appearances. Wired magazine rounds up some of the more oddball appearances of computers in film. Like, for example, the scene shown above from Soylent Green: Spoiler alert: Soylent Green is people! But that’s not the only thing we’re gonna spoil. Soylent Green is set in 2022, and at one point, you’ll notice that a government facility is still using a remote calculator that plugs into the CDC 6600, a machine that was state-of-the-art in 1971. Come to think of it, we should scratch this from the list. This is pretty close to completely accurate. Hit up the link below to check out the full gallery, including a really interesting bit about how the U.S. Government’s largest computer project–once decommissioned and sold as surplus–ended up on the sets of dozens of movies and television shows. The Most Wonderfully Ridiculous Movie Computers of All Time [Wired] Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference

  Read the article

• Sharing VPN from XP to Linux virtual

  - by user55513

  Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

  Read the article

• Backing up Windows 2003 Server that has Certificate Authority

  - by Dina

  I want to export and migrate a Certificate Authority CA role from a Windows 2003 machine to a new copy of Windows 2008 R2 virtual machine. I was told that I cannot have 2 CA roles on the same network at the same time. Therefore, I must first export the certificates on the older machine, delete the CA role, then add the CA role on the new machine and import the certificates into it. As a safety precaution, I am tasked to find a backup solution in case this does not work and I need to revert back to the old Windows 2003 CA. My question is: What is the best software for doing this type of backup? I am currently trying out Symantec Backup Exec 2012. Which I hope will allow me to create a backup prior to removing CA role on Windows 2003. If this CA migration fails, the backup will allow me to revert the old machine to a time before I removed its CA role.

  Read the article

• Preventing SSH RSA host key warnings for change of key vs IP address

  - by Adam M-W

  I have a network with DHCP enabled, and also a computer that dual boots operating systems and has different SSH keys on each (and yes, I would like to keep different keys on each rather than copying the same identity/private key to each). Because the IP address does not change between operating systems because the MAC address is the same, when connecting to ssh, even when not using the IP address but the hostname via DNS/mDNS, I get the warning: Warning: the RSA host key for 'hostname' differs from the key for the IP address '192.168.1.172' Offending key for IP in /Users/user/.ssh/known_hosts:37 Matching host key in /Users/user/.ssh/known_hosts:38 Are you sure you want to continue connecting (yes/no)? How can I surpress the warning when the hostname differs from the IP address for that hostname, but retain the ability to check host keys are the same for each hostname? (each OS has a unique hostname)

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• Where can I configure wireless to be passed on to the Virtualbox guest?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• impossible to connect.. days trying..

  - by dany

  I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 102.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

  Read the article

• New Linux Mint User Networking questions

  - by nyCecilia

  I have a readynas that I've been using with XP, Vista, and Win7. Because of weirdness with Vista, it is set up for full read/write guest access. Now I have a Linux Mint netbook. I have set up smb on it and can read from the readynas smb shares, but I can't write. What else can I check? Part2--(keep in mind my network knowledge is small...or smaller) what is the difference between NFS and SMB, can a readynas be set up to allow access to the SMB shares via NFS (if I can figure out NFS lol)? A link to a guide for beginners would be appreciated, google searching "Linux Mint Readynas" doesn't give me anything useful.

  Read the article

• How to squeeze the maximum performance out of Unity and GNOME 3?

  - by melvincv

  I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

  Read the article

• Extra Life 2012

  - by Chris Gardner

  Greetings, It's that time of year again. The time when I beg you for money for charity. See, unlike those bell ringers outside Wal-Mart, I don't do it when you have ten bazillion holiday obligations... Once again, I will be enduring a 24-hour marathon of gaming to raise money for Children Hospital in Birmingham. All the money goes straight to them, and you get to tell Uncie Samual that you're good for that money. I'd REALLY like to break $1000 this year, as I have come REALLY close for the past 2 year to doing so. Don't live near me? Live closer to a children's hospital in the Children's Miracle Network? It's OK. Go find a participant that is working for your hospital and hook them up. Just left me know, I will will join in with the karmic love you will already receive. This year, the event will take place on October 20th, beginning at 8 A.M. Once again, I will try to provide some web streams, etc, if you want to point and laugh (especially if I have to result to playing Dance Central at 4 AM to stay awake for the last part.) Look at it this way, I'm going to badger you about this for the next month. You might as well donate some money so you can righteously tell me to shut the Smurf up. You can place your bid at the link below. Feel free to spread the word to anyone and everyone. I thank you. The children thank you. Several breeds of feral platypus thank you. Maybe, just maybe, doing so will will help you feel the love felt by re-fried beans when lovingly hugged in a warm tortilla. Enjoy your burrito. http://www.extra-life.org/participant/cgardner

  Read the article

• Detecting damage done by virus

  - by user38471

  This morning after I went to college, a virus infected my PC without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagnosed with was "fakespypro" on a fully updated Windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appreciated.

  Read the article

• Is 192.168.122.1 a valid IP?

  - by Louise Hoffman

  From my understanding the networks is as follows Class A: 10.0.0.1 - 10.255.255.254 Class B: 172.16.0.1 - 172.16.255.254 Class C: 192.168.0.1 - 192.168.0.254 But then I look at ifconfig virbr0 on my Linux computer: virbr0 Link encap:Ethernet HWaddr 42:40:99:CB:02:7F inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:2842 (2.7 KiB) Here the IP address is 192.168.122.1. Is that an allowed IP? And if so, is 192.168 than actually a Class B network?

  Read the article

• how to workaround glassfish 3.0.1 admin page slow startup?

  - by black sensei

  I've installed netbeans which comes with glassfish. i just got a book about glassfish and i wanted to try.the first surprise is the time it took to the admin page to load. i've found on serverfault and by googling that the server is making call to external resource on the network on online (not sure about that). but the adding of the java options didn't speed up the loading of the admin page. how to work around it? i've heard so good about glassfish that this leaves me perplexed. thanks for reading and for helping.

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• Limit number of simultaneous connections squid makes to a single server

  - by Ben Voigt

  Note: I am asking about outbound concurrent connection limits, not inbound, which is sufficiently covered on existing questions Modern browsers typically open a large number of simultaneous connections, to take advantage of the fact that TCP fairly shares bandwidth between connections. Of course, this doesn't result in fair sharing between users, so some servers have started penalizing hosts which open too many connections. This limit can be configured client-side (e.g. IE MaxConnectionsPerServer, Firefox network.http.max-connections-per-server), but the method differs for each browser and version, and many users aren't competent to adjust it themselves. So we turn to a squid transparent HTTP proxy for central management of HTTP download. How can the number of simultaneous connections from squid to a remote webserver be limited, so the webserver doesn't perceive it as abuse of concurrent connections? Ideally the limit would be per source address. Squid should accept virtually unlimited concurrent requests from the client browser, and issue them sequentially to the remote server, only N at a time, delaying (but not dropping) the others.

  Read the article

• FTP error when doing file transfer

  - by Ernie

  I'm running vsftpd version 3.0.2 over FTPeS, and I'm having a bit of trouble with file transfers. It seems to work fine when I'm on the LAN, but not from an external IP address. I have the control port and data ports open on my server's software firewall and my router's firewall. When I'm using the service from an external IP address, it seems like sometimes a file transfer will complete, but it times out and I always get the client error: "426 Failure writing network stream". I've tried several clients. I'm thinking there is some sort of data sabotage either at the router or some server policy; maybe because I'm using passive ftp? Suggestions?

  Read the article

• Active Directory remote versus local computer logon

  - by Jake

  Hi, Hope some one can help a network/server noob understand how domains work in AD. I am in an organisation with 2 AD servers in 2 different countries, e.g. US and UK, and they set up the US and UK domains respectively. the accounts are set up such that all employees in both countries have a US\user and UK\user account. What is the difference if a UK user logon with US\user from a local UK computer, versus RDP (remote desktop) into a US server with US\user? Thanks for your help.

  Read the article

• Homegroup and NTFS permissions

  - by bytenik

  I'm running a copy of Windows 7 as a "server" at my home. I have several file shares that I want to make available to specific users only. I've modified the NTFS permissions to only allow these users to access their respective shares. However, while a locally logged on user can access the actual folders just fine, over the network the remote access is authenticating as HomeGroupUser$ rather than the actual user in question, as shown by the Computer Management panel for shares. I do have matching user accounts (i.e. my username locally is abc and a parallel account with username abc and the same password exists on the server machine). I don't want to disable homegroup because there are other shares where homegroup authentication would be desirable, especially for some people where they don't have a parallel account. Is there a way to get the system to authenticate first by matching username, and then by homegroup authentication if there's no matching user?

  Read the article

< Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >