Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 568/715 | < Previous Page | 564 565 566 567 568 569 570 571 572 573 574 575  | Next Page >

• 2560 x 1600 screen resolution not available when a second monitor is attached.

  - by sgmoore

  I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• Mac Mini's internet very slow, every other device fine (PC, iPhone, Xbox 360)

  - by alex

  I recently haven't used my Mac Mini for about 5 days (however it was left on). I seem to be able to connect and get great download / upload speeds through my PC, Xbox 360, iPhone and parents' laptop. However, my Mac Mini is very slow. OS X's Mail.app is downloading mail at 0.4kbps and then dropping to 0. Skype file transfers are doing the same. Browsing the net is a terrible experience. It is taking 30 seconds or more to download basic pages. All of my devices connect wirelessly to a Netgear router / modem. I have tried giving the Mac Mini a manual IP, and renew DHCP lease, as well as flush DNS in Terminal. I have also rebooted the router / modem twice, and the Mac Mini twice. Do you know what could be causing this? Thanks Update This is very weird. It is also very slow accessing localhost (setup through MAMP) and also slow to access the Netgear router config pages.

  Read the article

• Is StoreJet Transcend (0x2329) an Advanced Format drive?

  - by Graham Perrin

  I use a 640 GB StoreJet Transcend (0x2329) with ZEVO Community Edition 1.1.1 on OS X 10.8.2. Question Is this drive Advanced Format? Background I submitted a request for technical support to Transcend but the first response was gibberish so I don't expect a reasonable follow-up. Models at http://www.transcend-info.com/Products/CatList.asp?LangNo=0&ModNo=293 are similar but different sizes (not 640 GB). Mine is probably 25M2 (TS640GSJ25M2): Unless I'm missing something, nothing currently in the Transcend support area tells me whether the drive is Advanced Format. From System Information in OS X 10.8.2: StoreJet Transcend: Capacity: 640.14 GB (640,135,028,736 bytes) Removable Media: Yes Detachable Drive: Yes BSD Name: disk3 Product ID: 0x2329 Vendor ID: 0x152d (JMicron Technology Corp.) Version: 0.00 Serial Number: 322549FBA004 Speed: Up to 480 Mb/sec Manufacturer: JMicron History for the ZFS pool shows creation in March 2012 –  macbookpro08-centrim:~ gjp22$ zpool history zhandy | grep create 2012-03-14.17:29:37 zpool create -f -O compression=off -O copies=1 -O casesensitivity=insensitive -O snapdir=visible zhandy /dev/dsk/GPTE_1928482A-7FE4-482D-B692-3EC6B03159BA 2012-06-22.15:51:16 zfs create zhandy/Pocket Time Machine At that time I almost certainly used ZEVO Setup Assistant to create the pool. macbookpro08-centrim:~ gjp22$ zpool get ashift zhandy NAME PROPERTY VALUE SOURCE zhandy ashift 0 default If I discover that the drive is Advanced Format, a different ashift value will be appropriate.

  Read the article

• Using public interfaces on a server connected through a GRE tunnel

  - by Evan

  I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• Simulate SNMP traps to test surveillance

  - by jishi

  I'm trying to use Net-SNMP on Windows to emulate a trap that should trigger an alarm on our surveillance system. This is the setup: Windows 7 client that sends the trap Net-SNMP as software for sending the trap Linux with Adventnet ManageEngine OpManager as NMS (not relevant) This is what I'm trying to accomplish send trap with OID .1.3.6.1.4.1.5089.1.0.1 (according to the MIB I have loaded into my NMS) and just some sort of message into it to see if I can get any alarm in my NMS. I can see that I actually send a trap in my firewall, but I have no idea what it contains. This is my attempt so far: snmptrap.exe -v 2c -c xxxxxxx 192.168.100.65 '' 6 0 .1.3.6.1.4.1.5089.1.0.1 s "123456" However, I can't seem to find any reasonable documentation with examples for snmptrap. Basically, I need to know what: '' <- why do I need this? I can omit it and it will still send a trap 6 <- Enterprise gneric trap, I assume. Is this correct? 0 <- I have no idea, I need some sort of value for this .1.3.6.1.4.1.5089.1.0.1 <- the enterprise specific OID I assume, should this be followed by some more numbers s <- indicates string "123456" <- just a random test-string... This doesn't make much sense to me, and if anyone can shed some light on this I would be very grateful.

  Read the article

• CloudFlare dashboards empty, or performance issues

  - by Katafalkas

  I wanted to test CloudFlare performance so I set my image gallery domain on it and started testing. I have added PageRules for caching. And chose the Security: Essentially Off. I checked NS check tools and they say that my domain name is propagated with CloudFlare. For testing purpose I created a link that loads 200 images from that server, and was using loads.in website to determine how much it is faster. After trying few regions, I noticed that there were no improvement in loading speed. So I looked up the dashboards, and it was empty. I am not sure if I am doing something wrong, or made some error in my setup, or it takes few days to start caching or working properly, but at the moment - after a day of testing - dashboards are empty. Also the NS check tools sais that all name servers are propagated to CloudFlare and working fine. So I assume I got a bad performance because it is simply not working. I sent a letter to CloudFlare support team, but did not get any straight answer. So essentially my question is: Anyone has any experience with CloudFlare ? How long does it take for it to start caching static content to CDN ? Or there is simply something I am doing wrong ?

  Read the article

• virtualisation with kvm: export services from guest to the host

  - by ascobol

  Hello, I would like to export some services from the guest os to the host os, via kvm, and by the same way learn some things about networking. I have tried the following commands: In the host (kubuntu 10.4): $ sudo tunctl -u ascobol Set 'tap0' persistent and owned by uid 2401 $ sudo ifconfig tap0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255 The ifconfig command returns: $ /sbin/ifconfig tap0 Link encap:Ethernet HWaddr 3e:4e:e3:cc:bc:92 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::3c4e:e3ff:fecc:bc92/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:17 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Then I run the virtual machine (ubuntu server 10.4): $ sudo kvm -hda ubuntuserver104.qcow2 -net nic -net tap,name=tap0,script=no (I'm using sudo because without it fails with the following message:) warning: could not configure /dev/net/tun: no virtual network emulation With sudo the virtual machine boots, I just get this message: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin" In the virtual machine: $ ifconfig eth0 192.168.2.2 netmask 255.255.255.0 broadcast 192.168.2.255 Now if I run: $ ssh 192.168.2.2 I just get a No route to host What is wrong with this setup ? Thanks !

  Read the article

• Unable to understand why Alfresco doesn't start on Tomcat

  - by Infernalsirius

  Hi all, I have a problem that I've been inspecting for a while now, googling and everything but could not begin to understand. I'm really not used to java, even less tomcat. So there it is. First, the setup. Centos 5.3 on a virtualized server. Bitnami Native Alfresco stack (tomcat5.5, mysql5, java, javajdk, JDBC) Content of catalina.log. Since it's the shortest and where I found my first clue to what is going wrong: SEVERE: Error listenerStart Aug 27, 2009 5:32:58 PM org.apache.coyote.http11.Http11BaseProtocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:32:58 PM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 229 ms Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardService start INFO: Starting service Catalina Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/5.5.25 Aug 27, 2009 5:32:58 PM org.apache.catalina.core.StandardHost start INFO: XML validation disabled Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart Aug 27, 2009 5:34:47 PM org.apache.catalina.core.StandardContext start SEVERE: Context [/alfresco] startup failed due to previous errors Aug 27, 2009 5:34:48 PM org.apache.coyote.http11.Http11BaseProtocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:34:48 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Aug 27, 2009 5:34:48 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/11 config=null Aug 27, 2009 5:34:48 PM org.apache.catalina.storeconfig.StoreLoader load INFO: Find registry server-registry.xml at classpath resource Aug 27, 2009 5:34:48 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 110327 ms Aug 27, 2009 5:38:27 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-8080 Aug 27, 2009 5:38:28 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina Aug 27, 2009 5:38:29 PM org.apache.coyote.http11.Http11BaseProtocol destroy INFO: Stopping Coyote HTTP/1.1 on http-8080 There's the content of catalina.out, it seems to be a stack trace or application trace of the error, is that right? Catalina.out gist on github There is a 404 error telling me this: The requested resource (/alfresco/) is not available. This is it. I think.

  Read the article

• TCP: Address already in use exception - possible causes for client port? NO PORT EXHAUSTION

  - by TomTom

  Hello, stupid problem. I get those from a client connecting to a server. Sadly, the setup is complicated making debugging complex - and we run out of options. The environment: *Client/Server system, both running on the same machine. The client is actually a service doing some database manipulation at specific times. * The cnonection comes from C# going through OleDb to an EasySoft JDBC driver to a custom written JDBC server that then hosts logic in C++. Yeah, compelx - but the third party supplier decided to expose the extension mechanisms for their server through a JDBC interface. Not a lot can be done here ;) The Symptom: At (ir)regular intervals we get a "Address already in use: connect" told from the JDBC driver. They seem to come from one particular service we run. Now, I did read all the stuff about port exhaustion. This is why we have a little tool running now that counts ports and their states every minute. Last time this happened, we had an astonishing 370 ports in use, with the count rising to about 900 AFTER the error. We aleady patched the registry (it is a windows machine) to allow more than the 5000 client ports standard, but even then, we are far far from that limit to start with. Which is why I am asking here. Ayneone an ide what ELSE could cause this? It is a Windows 2003 Server machine, 64 bit. The only other thing I can see that may cause it (but this functionality is supposedly disabled) is Symantec Endpoint Protection that is installed on the server - and being capable of actinc as a firewall, it could possibly intercept network traffic. I dont want to open a can of worms by pointing to Symantec prematurely (if pointing to Symantec can ever be seen as such). So, anyone an idea what else may be the cause? Thanks

  Read the article

• Permissions Required for Sharepoint Backups

  - by Wyatt Barnett

  We are in the process of rolling out an extranet for some of our partners using WSS 3.0 as the platform. We already use it internally for a variety of things, and we are using the following powershell script to backup the server: param( $url="http://localhost", $backupFolder="c:\" ) [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") $site= new-Object Microsoft.SharePoint.SPSite($url) $names=$site.WebApplication.Sites.Names foreach ($name in $names) { $n2 = "" if ($name.Length -eq 0) { $n2="ROOT" } else { $n2 = $name } $tmp=$n2.Replace("/", "_") + ".sbk" $saveas = "" if ($backupFolder.Length -eq 0) { $saveas = $tmp } else { $saveas = join-path -path $backupFolder -childPath $tmp } $site.WebApplication.Sites.Backup($name, $saveas, "true") write-host "$n2 backed up to $saveas." } This script works perfectly on the current installation running as our domain backup user. On the new box, it fails when ran as the backup user--claiming "The web application located at http://extranet/" could not be found. That url does, in fact, work so I'm fairly certain it isn't anything that dumb and rather is some permissions issue. Especially because, when executed from my security context, the script works perfectly. I have tried making the backup user a farm owner, as well as added him to the various site collection admin groups on the extranet. The one major difference between the extranet and the intranet server is that the extranet has an alternative access mapping (for https://xnet.example.com) and also uses forms authentication for that mapping. Anyhow, what permissions (or other voodoo) do I need to setup to get this script to work properly?

  Read the article

• Recording screen-casts on another computer

  - by paleozogt

  We're trying to record the desktops of users using demo versions of our software (this is an in-house lab setup). We need to have the recording happen on a separate computer (just across the room), so that the recording software doesn't interfere with the user. Every screen recording software I've seen will only record what's happening on the computer its installed on; ie, you can't record what's happening on another computer. So it seems I need to cobble together a solution (unless anyone knows of software that will do this). Getting the video to the other computer seems easy enough. I'm using TightVNC with the DFMirage driver on the test computer. The recording computer connects to the test computer with TightVNC and then uses CamStudio to record what's happening. The real problem is how to deal with the audio. We need to record both what the user is saying (through a headset mic) as well as the sounds produced by the test computer. But VNC doesn't transmit audio. :( I'm not sure how to get both audio streams (mic and sounds) over to the recording computer. Any ideas?

  Read the article

• Mac OS X Disk Encryption - Automation

  - by jfm429

  I want to setup a Mac Mini server with an external drive that is encrypted. In Finder, I can use the full-disk encryption option. However, for multiple users, this could become tricky. What I want to do is encrypt the external volume, then set things up so that when the machine boots, the disk is unlocked so that all users can access it. Of course permissions need to be maintained, but that goes without saying. What I'm thinking of doing is setting up a root-level launchd script that runs once on boot and unlocks the disk. The encryption keys would probably be stored in root's keychain. So here's my list of concerns: If I store the encryption keys in the system keychain, then the file in /private/var/db/SystemKey could be used to unlock the keychain if an attacker ever gained physical access to the server. this is bad. If I store the encryption keys in my user keychain, I have to manually run the command with my password. This is undesirable. If I run a launchd script with my user credentials, it will run under my user account but won't have access to the keychain, defeating the purpose. If root has a keychain (does it?) then how would it be decrypted? Would it remain locked until the password was entered (like the user keychain) or would it have the same problem as the system keychain, with keys stored on the drive and accessible with physical access? Assuming all of the above works, I've found diskutil coreStorage unlockVolume which seems to be the appropriate command, but the details of where to store the encryption key is the biggest problem. If the system keychain is not secure enough, and user keychains require a password, what's the best option?

  Read the article

• What's the best way to run Drupal and Django sites behind the same Varnish server?

  - by Alexis Bellido

  I have a high traffic website running with Drupal and Apache, five web servers behind a Varnish server load balancing. Let's say this site is example.com. I'm using five backends and a director like this in my default.vcl: director balancer round-robin { { .backend = web1; } { .backend = web2; } { .backend = web3; } { .backend = web4; } { .backend = web5; } } Now I'm working on a new Django project that will be a new section of this site running on example.com/new-section. After checking the documentation I found I can do something like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.backend = newbackend; } else { set req.backend = default; } } That is, using a different backend for a subdirectory /new-section under the same domain. My question is, how do I make something like this work with my director and load balancing setup? I'm probably going to run two or more web servers (backends) with my new Django project, each one with a mix of Gunicorn, Nginx, and a few Python packages, and would like to put all of those in their own Varnish director to load balance. Is it possible to do use the above approach to decide which director to use?, like this: sub vcl_recv { if (req.url ~ "^/new-section/") { set req.director = newdirector; } else { set req.director = balancer; } } All suggestions welcome. Thanks!

  Read the article

• IIS6 Virtual SMTP server isn't coming back up automatically after a system restart

  - by Julian James

  I've got a virtual server running Win2008 RC2. I've set up IIS6 with a virtual SMTP server on it to be the mail provider for the websites I'm hosting there. It all works great, but if for some reason the server reboots (auto updates are still enabled - I'm trying to make this as little work as possible as we've got a Lot of clients), the IIS6 doesn't restart the SMTP server. The failure causes 500 errors on the current setup, so I'm spending half the day apologising. Any ideas? In Services I've set everything to come back up automatically, but still no dice. As soon as I restart the SMTP, no problems, all the mail gets sent. It's working perfectly, it just won't restart on it's own. I'd really rather not turn auto updates off as we're such a small company I just can't spare the time to be manually updating 15 copies of windows every time MS decide there's a security patch. All advice appreciated! BTW, I am a complete newb to these forums. I searched but couldn't find an answer, so please be nice. But firm. I've got to learn here.

  Read the article

• Munin graphing by CGI

  - by Vaughn Hawk

  I have Munin working just fine, but any time I try to do cgi graphing - it just stops graphing... no errors in the log, nothing. I've followed the instructions here: http://munin-monitoring.org/wiki/CgiHowto - and it should be working - here's my munin.conf setup, at least the parts that matter: dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin tmpldir /etc/munin/templates graph_strategy cgi cgiurl /usr/lib/cgi-bin cgiurl_graph /cgi-bin/munin-cgi-graph And then the host info yada yada - graph_strategy cgi and cgrurl are commented out in munin.conf - that's because if I uncomment them, graphing stops working. Again, I get no errors in logs, just blank images where the graphs used to be. Comment out cgi? As soon as munin html runs again, everything is back to normal. I'm running the latest version of munin and munin-node - I've tried fastcgi and regular cgi - permissions for all of the directories involved are munin:www-data - and my httpd.conf file looks like this: ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory /usr/lib/cgi-bin/> AllowOverride None SetHandler fastcgi-script Options ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> <Location /cgi-bin/munin-cgi-graph> SetHandler fastcgi-script </Location> Does anyone have any ideas? Without this working, at least from what I understand, Munin just graphs stuff, even if no one is looking at them - you add 100 servers to graph, and this starts to become a problem. Hope someone has ran into this and can help me out. Thanks!

  Read the article

• Some clients cannot connect to Server 2008 R2 VPN

  - by Robl

  Hi all, Have a server 2008 r2 setup as a VPN server. We have created a windows group to control access to the VPN called vpn-users. Clients are all Windows 7 Pro. This all seems to work fine except some users cannot connect to the VPN! For example I try to logon to the VPN from a client and get an error saying the server refused the connect due to a policy in place. Specifically authentication type! Fine I think. So i drop that user into the vpn-users group created for this and try again and hey presto the user can now logon! Great. Now try this with another user. But this time I get the same error even though I have dropped them into the vpn-users group!! So does anyone have any idea why this works for some users and not for others?? I have tried moving the user from certain OU's in AD to others, copying the account, taking the user out of the vpn-users group and then back in but get the same error each time. Any thoughts anyone?

  Read the article

• Resolve another domain from current AD domain

  - by faulty

  We have 2 AD domain setup in our office. First is the primary domain for our office and exchange. The 2nd one is for development use to simulate production environment of our clients. Both domain are hosted on Windows 2008 R2 Enterprise. We, the development team has no access to the office domain other than login and email purpose. DNS is running on PDC of both domain. Both domain does not use public domain name. Now, our machines are joined to the development domain and we use outlook to access our office's exchange. We've added DNS entries for both the domain. From time to time we are having problem resolving our office domain (i.e. during outlook login), which we need to edit our NIC's DNS to have only DNS server from our office and then flush DNS. After that switch back once it's able to resolve. Is there a permanent solution for this scenario like specifying that the office domain be resolve with another DNS server when requested from the development domain? Thanks

  Read the article

• Setting up PerformancePoint Services on Sharepoint 2010: connection errors

  - by Rik

  I have tried to setup PerformancePoint Services on SharePoint 2010, but every time I try to use the dashboard designer, I get this error: “An error has occurred attempting to contact the specified SharePoint site” I have tried these steps but it hasn't helped. Any ideas? The event log gives the following information: WebHost failed to process a request. Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/24724999 Exception: System.ServiceModel.ServiceActivationException: The service '/_vti_bin/client.svc' cannot be activated due to an exception during compilation. The exception message is: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item. --- System.ArgumentException: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. Parameter name: item at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item) at System.Collections.Generic.SynchronizedCollection`1.Add(T item) at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses) at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses) at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) --- End of inner exception stack trace --- at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) Process Name: w3wp Process ID: 2576

  Read the article

• How do I Install Intermediate Certificates (in AWS)?

  - by getmizanur

  I have installed private key (pem encoded) and public key certificate (pem encoded) on Amazon Load Balancer. However, when I check the SSL with site test tool, I get the following error: Error while checking the SSL Certificate!! Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found. Normally this indicates that not all intermediate certificates are installed on the server. I converted crt file to pem using these commands from this tutorial: openssl x509 -in input.crt -out input.der -outform DER openssl x509 -in input.der -inform DER -out output.pem -outform PEM During setup of Amazon Load Balancer, the only option I left out was certificate chain. (pem encoded) However, this was optional. Could this be cause of my issue? And if so; How do I create certificate chain? UPDATE If you make request to VeriSign they will give you a certificate chain. This chain includes public crt, intermediate crt and root crt. Make sure to remove the public crt from your certificate chain (which is the top most certificate) before adding it to your certification chain box of your Amazon Load Balancer. If you are making HTTPS requests from an Android app, then above instruction may not work for older Android OS such as 2.1 and 2.2. To make it work on older Android OS: go here click on "retail ssl" tab and then click on "secure site" "CA Bundle for Apache Server" copy and past these intermediate certs into certificate chain box. just incase if you have not found it here is the direct link. If you are using geo trust certificates then the solution is much the same for Android devices, however, you need to copy and paste their intermediate certs for Android.

  Read the article

• How to configure networking on an appliance such that it can plug and play on any corporate network?

  - by Joshua Lim

  I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

  Read the article

• Multiple Servers + One MailServer

  - by theomega

  Hy, I got several Linux-Servers (running Debian) where different services run: Database-Servers, Webservers, Applicationsservers, Tools and so on. All Servers are connected to the same internal network. There is also one special Server which is the Mail-Server: All Mailaccounts are stored on this server, it is also the outbound Mailserver for all the other servers. I want all Mails for all servers to get saved on the Mailserver. For example if an cron-job fails on one of the web-servers the mail should not be delivered to the local user but instead to the Mailserver so I get a centralized place for mail storage. How do you set up this scenario? My current setup is: Using postfix as MTA on the Mailserver and using ssmtp on all the other servers. SSMTP is configured to send the mails to the Mailserver. The Mailserver is configured to allow the whole internal network to relay mails using itself. Is this the right way to choose? I also thought about setting up a MTA (postfix) on every server and configure it somehow to forward the mails. What would be the advantage of this solution?

  Read the article

• SQL Server 2008 Cluster Installation - First network name always fails

  - by boflynn

  I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

  Read the article

• Windows 7 blank dvi screen

  - by user99

  I've just upgraded to Windows 7 Ultimate 64 bit. I had an issue during installation; after setup rebooted instead of going to the 'Completing installation' screen I just got a blank screen. I eventually(!) figured out that this meant 'un-plug your second monitor to proceed'. When I did this, installation completed in a snap and everything runs fine. However, whenever I plug my second monitor into my PC, it gets no signal, the the primary monitor removes all windows. icons, the taskbar and the cursor just shows the desktop wallpaper. I'm running a GTS8800 512mb, with the latest drivers (197 IIRC). The monitors are identical, and both plug into DVI sockets on the graphics card, the only difference is I connect one using a straight DVI cable and the other using a VGA cable and a VGA-DVI converter. It's the DVI cabled one that has the issues (if I plug it in by itself it gets no signal). Everything was working fine before I upgraded to Windows 7 (I used to run XPSP2). Anyone have any ideas?

  Read the article

< Previous Page | 564 565 566 567 568 569 570 571 572 573 574 575  | Next Page >