Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 569/729 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

  • Network cabling with multiple patch panels?

    - by dannymcc
    I am in the very early stages of planning a network cabling upgrade in our office, mainly to upgrade the old cables from Cat5 to either 5e or 6. I am also planning on upgrading all of our 10/100 switches to 10/100/1000 switches. I would like to have three small wall mounted cabinets spread around the building, each with a patch panel and switch. These would all lead back to our server room. The question is; should I have two patch panels in each wall cabinet, one with 24 or 48 ports that are connected to a matching patch panel in the server room. The second patch panel would then link to each device in that cabinets area. Then I wouldn't put a switch in the small cabinets. All switching would be done in the server room. Or, should I have one main cable from the server room to each of the cabinets - plugged straight into the switch and the patch panel is for devices in the cabinets area? I hope that makes sense!

    Read the article

  • How do I fix this Windows 7 wireless connectivity issue?

    - by Charles Randall
    I have a laptop with an Intel Wireless Centrino 6300 module. Recently, the machine has stopped properly connecting to my wireless router. It will get stuck in a loop of connecting, then disconnecting and reconnecting. While connected, it will simply say "No Internet Access." Running inSSIDer 2.0, it shows my network jumping around between two channels -- I know this isn't the case, because I've set my router to sit on one single channel. My MacBook Pro, Boxee Box, PS3, and Xbox 360 all connect fine to the wireless and have no problems at all. I know it's not the wireless module, as I bought a second one recently assuming the first had died -- but I get the same behavior with both. Sometimes, I can fix the issue temporarily by deleting the network (Using the Manage Wireless Networks page), and then re-adding it (via standard wireless methods). Then it will work for a few days. But inevitably the problem comes back, and now the laptop simply won't connect to the wireless at all, even if I take steps that usually work. Since I've ruled out the hardware, and it's unlikely some kind of interference issue (because I would expect to see it on any multitude of other devices), I would think at this point that it's a problem with Windows itself. One thing that might be a hint, even though I delete the network, when I add it again, it's always listed as "Wireless Network Connection 2" even though there isn't another in the list.

    Read the article

  • How to restore infrared support in Windows XP?

    - by Emil Rasmussen
    My infrared port is not working on my Windows XP SP 3 (Thinkpad X60). I can see it Device Manager, and it's status is, that it is working probably. The problem manifests in several ways. Originally I was trying to transfer data from my Polar RS800CX watch, and the Polar ProTrainer 5 software gave me the this error message: "Communication port couldn't be opened". Then I tried to connect the watch to another computer, and the infrared connection was established immediately. I then tried to connect the other computer to my Thinkpad X60. The other computer again immediately showed the Wireless Link icon "'computername' is in range" in the notification area. But nothing is shown on the Thinkpad, and a file transfer to the Thinkpad is unsuccessful with an error message that reports that "the target machine actively refused it [the connection]". This brings me to conclude that the infrared support in Windows on the Thinkpad is somehow broken. This is further supported by the fact that I can't find the "Wireless Link" icon in the Control Panel and when I try to run the irprops.cpl nothing happens. So the question is, how to reinstall the infrared support? Some of the solutions that I have explored is: I have tried to disable/enable the infrared in the BIOS - to trick a re-installation. The IR modules settings on the other computer that can get a successful IR connection is an exact match to the ThinkPad that can't get a connection. The was a problem in Windows XP SP 2 with the Wireless Link icon - MS KB article - but that hotfix can't be applied on SP 3 installation. I also guess that the hotfix is included in SP 3. Any other suggestions?

    Read the article

  • How can I calculate power consumption of my PC in Watt?

    - by Jitendra vyas
    How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

    Read the article

  • How can I close a port that appears to be orphaned by Xvfb?

    - by Jim Fiorato
    I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

    Read the article

  • CD and DVD burning very slow with LG DVD Burner

    - by Om Nom Nom
    I have an HP m7560in Desktop which came with an LG DVD burner. As far back as I can remember, it has been having problems in burning discs. It used to take about one and a half hour to burn 4 GB of data on a blank DVD-R. I am using Nero and ImgBurn and I usually select 8x speed for burning. I used to run XP earlier and now I run Windows 7 on it, but I face the problem on both. I have already checked that DMA mode is selected in the IDE controllers' properties. On XP, uninstalling the IDE controllers and DVD drive from the Device Manager, rebooting and letting it install the drivers again fixed the problem for a while, but after a couple reboots, the problem used to come back. On Windows 7, even doing that is not fixing the problem. In fact, in Windows 7, the burning process doesn't even begin. Imgburn gets stuck on the first stage (of writing Lead-In), and it never progresses until I turn off / reset the computer. I checked the disc info after this happened, and the disc still shows empty and ready to be burned on, so it's obvious that it didn't even touch the disc. I have already had the drive replaced once by HP, but it didn't fix the problem. Do you guys have any suggestions? (Note that Windows Updates doesn't give any newer driver for the controllers, or any other components for that matter).

    Read the article

  • SNAT through Racoon IPSec VPN

    - by Mite fine d'ailes
    I am trying to route traffic from a device (that I will call "target") connected to my Ubuntu box (that I will call "host") to servers at a remote office. The host uses a Racoon IPSec VPN, connected through a NIC called efix. This creates an aliased IF called efix:0 which has IP adress 192.168.190.132. It is able to reach the servers. The link between host and target is an Ethernet link, using IP adresses 10.0.0.1 on IF eusb for the host and 10.0.0.2 on IF eth0 for the target. I have setup the following routes and iptables entries: On target: 10.0.0.0 * 255.255.255.0 U 0 0 0 eth0 default 10.0.0.1 0.0.0.0 UG 0 0 0 eth0 On host: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -j SNAT --to 192.168.190.132 iptables -A FORWARD -s 10.0.0.0/24 -j ACCEPT iptables -A FORWARD -d 10.0.0.0/24 -j ACCEPT Using Wireshark to monitor an HTTP GET, I can see SYN packets from the target go all the way to the server, but the server's SYNACK packets stop at the host and are not forwarded to the target. Am I missing something here ? Isn't SNAT supposed to keep track of the connections ?

    Read the article

  • How do I easily repair a single unreadable block on a Linux disk?

    - by Nelson
    My Linux system has started throwing SMART errors in the syslog. I tracked it down and believe the problem is a single block on the disk. How do I go about easily getting the disk to reallocate that one block? I'd like to know what file got destroyed in the process. (I'm aware that if one block fails on a disk others are likely to follow; I have a good ongoing backup and just want to try to keep this disk working.) Searching the web leads to the Bad block HOWTO, which describes a manual process on an unmounted disk. It seems complicated and error-prone. Is there a tool to automate this process in Linux? My only other option is the manufacturer's diagnostic tool, but I presume that'll clobber the bad block without any reporting on what got destroyed. Worst case, it might be filesystem metadata. The disk in question is the primary system partition. Using ext3fs and LVM. Here's the error log from syslog and the relevant bit from smartctl. smartd[5226]: Device: /dev/hda, 1 Currently unreadable (pending) sectors Error 1 occurred at disk power-on lifetime: 17449 hours (727 days + 1 hours) ... Error: UNC at LBA = 0x00d39eee = 13868782 There's a full smartctl dump on pastebin.

    Read the article

  • Still about SSD potentials...write and read speed

    - by Macroideal
    I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

    Read the article

  • Any ideas out there as to how the data can be recovered from an SSD?

    - by ben
    A friend had some form of catastrophic failure on an HP mini 1000, unbootable. Of course there was data that wasn't backed up. I've removed the SSD and hooked it up to a ZIF 40 enclosure but can not seem to get the drive to be recognized in Windows 7. In Disk Management it displays as present, but uninitialized. Attempting to initialize it presents an error Virtual Disk Manager - "The device is not ready". There is scant information on MIE (the custom OS), so I'm not even sure what kind of file system I'm dealing with. In any case, if the filesystem is indeed some flavor other than FAT or NTFS, is this error consistent with that? Are there any creative ideas out there as to how the data can be recovered? Update: Thanks for all the suggestions! I hadn't even considered running a live cd. Unfortunately no luck with Ubuntu (live cd) or explore2fs. The zif connection seems ok (color coded green led for proper connect, orange for not). The drive can't be initialized and therefore can't be formatted, so I guess there may be some real damage. Probably needs to head to a specialist. Thanks again for the feedback, much appreciated.

    Read the article

  • Broken UAC, cant edit File/folders or change settings in user account

    - by Antoros
    It appears that UAC is broken cant move/delete some file/folders, when asked to use administrative right (and say yes) it shows the loading bar and then nothings gets moved/deleted, no error whatsoever opened control panel, user account and when i click on any option with the Shield (administrative rights) the mouse changes to loading and thengo back to normal, not opening any menu or showing any error Already done a sfc /scannow , no errors found Already used Microsoft's Fix it, reclycle bin broken and repaired, still the same error Used microsoftaccounts tool , this are the errors i got: Problem with microsoft account policy... <- this is the problem (didint fix) Trust this PC <- loop of redirections, cant get to trust this pc (only one with w8) Problems witht sytem registration : i think it is because of the soft system reset Some setting have sync turned off : i never configured anything to sync Rootcauses found and created logs : would like to know where the logs are saved... had to use a ".reg" file to change uac setting to never notify, thinking it would fix this, no, it stoped asking though, i can still open a cmd with Administrative rights, but cant access to UAC settings Accesed Administrator account (net user administrator /active:yes)and even with that account could change any settings so there it is, dont know what else to do in the moment (this pc broke with 8.1 update and was restored to factory configuration, it broke several drivers and kept most of the registry entries, i cant find the cause of this problem. other info: i tried to delete a file in a program folder and couldnt, downloaded unlocker to check first if it was permissions but no, it showed me a msg telling me that there wasnt any error, and if i would like to delete it, clicked on yes, and it did delete it, what amuses me is that i cant without this tool, not even using the feature that takes over ownership Edit: wow, in a not crappy pc chkdsk is fast, completed with no errors found : /

    Read the article

  • How to use connectify to share files between 2 laptops, one running Windows 7?

    - by p2pnode
    I have 2 laptops one running XP and another Windows 7. Both have WiFi-card installed. I want to be able to share files between these 2 machines and then in next step also be able to share internet connection. I have heard that Connectify on Windows 7 is a very handy and easy tool to set up a hotspot and other machines even XP,Vista can connect to this host hotspot and share files and internet connection. I am able to search for the network (set on host) on my client machine. But how to share files? I don't see any such menu or anything. Also after I have installed connectify on Windows 7, I am not able to connect to internet using data card. It throws error that "Error 31:A A device attached to the system is not functioning". And on client machine, if I connect to data card, as well as connect to wireless network setup by host machine, I no longer am able to access internet, even though the data card is connected. The browser throws error: Please help. Any other utility similar to connectify etc?

    Read the article

  • upstart config to start sync daemon as non-root user

    - by Rudiger Wolf
    I am planning to use inosync to sync data from master server to several client servers. I have created a user called rsyncuser in both master and slaves with access permissions and passwordless ssh access from master to slave servers. Inosync is working when I use it from the command line as rsyncuser. Next I want this to start automatically when server is turned on. I figured upstart is the way to get this working. I am unable to find the right upstart command to get this working. Here is my upstart conf file. The problem seems to be around running "inosync -d -c /etc/inosync/inosync_rsyncuser.py" as a given user. As you can see I have tried a number of various options! description "start inosync to sync data to other CDN Servers as rsyncuser" console output #start on startup #stop on shutdown start on (net-device-up and local-filesystems) stop on runlevel [016] #start on runlevel [2345] #stop on runlevel [!2345] #kill timeout 30 env RUN_AS_USER=rsyncuser expect fork script echo "Inosync updtart job seems to have started" /tmp/upstart.log # exec sudo -u rsyncuser -c "ls -la" /tmp/upstart.log 2&1 # LOGFILE=/var/log/logfile.`date +%Y-%m-%d`.log # exec su - $RUN_AS_USER -c "inosync -d -c /etc/inosync/inosync_rsyncuser.py" $LOGFILE 2&1 # exec su -c "ls -la" /tmp/upstart.log 2&1 # emit inosync_running end script

    Read the article

  • ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

    - by ewwhite
    I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

    Read the article

  • TomTom GO & Ubuntu Linux: impersonating a GPRS phone with dund

    - by Broam
    Background: I've called TomTom support, and they don't support Linux. I can get my GO 730 to mount Mass Storage, and I found a shell script that will allow me to install maps (haven't tried it; will update when I do.). As of note: USB 2.0 only. 1.1 ports will not work. However--I still can't update the TomTom or take advantage of any traffic services. The GO will connect to a mobile phone, but I don't have one that supports tethering. However, I've found a site that claims to know a way to get a Linux Machine to impersonate a phone advertising GPRS services and it apparently works in Fedora as old as FC4. I'm having some serious trouble getting this to work on Ubuntu 9.10 Karmic, mainly because I think some of the built-in bluetooth stuff is getting in the way. Changing the class bits in main.conf (hcid.conf does not exist) doesn't crash..., and dund starts and listens, but the TomTom device never seems to want to connect to my machine. I haven't played around much with sdcptool (I think that's the name, not in front of a Linux machine right now) but maybe I have to advertise the DUN profile...I'm not very sure. My Question: I have no way to diagnose the problems. What are some diagnostic tools I can use to help dig down and figure out what's going on? Update: apparently dund is a legacy tool that's going away. What replaces it?

    Read the article

  • Tomato OS: "memory exhausted" running vi .... how to solve?

    - by Sam Jones
    I have set up tomato (shibby) on an asus RT-N66U router. It works great. I loaded up a few pieces, like transmission and optware. I can run vi, but when I run vi it fails with a "memory exhausted" error, and the terminal session hangs. For reference: If I simply start "vi" it runs fine. But if I specify vi I get the memory exhausted error, even if the file I am opening is just a couple of hundred bytes in size (like fstab). I discovered that my swap partition was not properly set up, so I did that. The swapon command now indicates I really do have a swap: [root@MyRouter samba]$ swapon -s Filename Type Size Used Priority /dev/sda1 partition 32900860 0 1 How can I get vi to work? Thanks! System setup reference information: asus RT-N66U router 2TB usb hard drive partitions on hard drive: Disk /dev/sda: 2000.4 GB, 2000398839808 bytes 255 heads, 63 sectors/track, 30400 cylinders Units = cylinders of 16065 * 4096 = 65802240 bytes Disk identifier: 0xfacbc8ab Device Boot Start End Blocks Id System /dev/sda1 1 512 32900868 82 Linux swap / Solaris /dev/sda2 513 29000 1830638880 83 Linux running samba memory: $ cat /proc/meminfo MemTotal: 255840 kB MemFree: 210980 kB Buffers: 5264 kB Cached: 22768 kB SwapCached: 0 kB Active: 20272 kB Inactive: 11448 kB HighTotal: 131072 kB HighFree: 99868 kB LowTotal: 124768 kB LowFree: 111112 kB SwapTotal: 32900860 kB SwapFree: 32900860 kB Dirty: 0 kB Writeback: 0 kB TIA!

    Read the article

  • smartctl not actually running self tests?

    - by canzar
    I want to run the smartctl self tests to check the health of the drives in my RAID array (PERC 5/i). The array is on sda and comprises six drives. I can check the status using sudo smartctl /dev/sda -d megaraid,0 -a And I see that SMART is available and enabled on all the drives. I have tried to run self tests using sudo smartctl /dev/sda -d megaraid,0 -t short and sudo smartctl /dev/sda -d megaraid,0 -t long I have also tried it on all of the drives 0-5. No matter what I try, when I run: sudo smartctl /dev/sda -d megaraid,0 -l selftest I always get the same result, which seems to always report that I have never run a self test. /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat' ===START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] From what I read, I should have no problem running the short and long self tests on the array while it is mounted. Does anyone else have experience running these tests on a PERC 5/i raid array who could lend some insight into what is causing the problem? (smartmontools release 5.40 dated 2009-12-09 at 21:00:32 UTC)

    Read the article

  • Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

    - by cdonner
    I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

    Read the article

  • Basic IP address structure

    - by dannymcc
    We currently have a few servers, around 30-40 workstations and 16 phones. Each device has a static IP address. As an example the standard settings for a new workstation is; IP: 192.168.1.XXX Subnet: 255.255.255.0 Gateway: 192.168.1.99 DNS: 192.168.1.50 As I am slowly exploring new server OS's and virtualisation etc. I am getting close to wanting a wider range of IP addresses. What I would like to do is seperate the devices by IP as follows: Servers 192.168.1.XXX Workstations 192.168.2.XXX Printers 192.168.3.XXX Phones 192.168.4.XXX VM's 192.168.5.XXX Is this a bad idea, or is this a common way of doing things? My biggest concern is the phones and subnet masks. The phones are managed by our provider although I have access to the server that runs them. Would I need to change the subnet mask to 255.255.0.0 on all devices? Or only those that change? For example, the phones don't need to connect to any other devices other than other phones and the phone server. So if I have the phones on 192.168.1.XXX with a subnet mask of 255.255.255.0 and then moved everything I had complete ownership/control of to 192.168.X.XXX with a new subnet mask of 255.255.0.0. Would that work?

    Read the article

  • How to completely disable laptop sound?

    - by Alvaro Rodriguez
    I have a HP Pavillion DV7 laptop with win 8 pro. The laptop has an unidentified problem with sound drivers or hardware that sometimes causes volume to constantly jiggle up and down. This is very annoying because of these consequences: Renders mute unusable - as the volume changes the sound unmutes automatically Causes an annoying win 8 "surface UI" notification to appear constantly in the upper left corner, which is distracting enough by itself, but more importantly Renders the whole "surface UI" unusable, because it loses focus whenever the sound changing notification appears When the jiggling happens, the laptop also loses the ability to redirect sound to earphones - sound comes out of the speakers even if earphones are connected. To solve these issues I want to completely disable sound in the laptop (I've tried reinstalling drivers several times to no end). I have tried disabling all sound related drivers and devices in the Device Manager but Windows re-enables those automatically whenever I restart the laptop. The BIOS doesn't have any settings to disable sound hardware either. Please don't suggest having the laptop sound serviced or fixed. It's not worth the expense. I just want to remove sound support so I can use it normally. It is very unusable as it is now.

    Read the article

  • How to make DD-WRT router's (configured like a repeater) devices be accessible on LAN? (i.e. integrate DHCP for both routers)

    - by Annonomus Penguin
    I have a D-Link DIR-600-A1 router running DD-WRT (using the 601's firmware: except for the model number, they are near identical). It has an Atheros chip, so there is no "repeater" option. You can bypass this by setting the main radio as a client to the main router, and adding a virtual radio configured as an AP. You can then set up the credentials for connecting to the main router and allowing devices to connect to the repeater/router. I have a few devices on my network: Ethernet computers Server with Samba running WiFi devices connected to the main router I then wanted to add a repeater. I have a couple of other things on the repeater: WiFi Computer Other WiFi devices. Anyway, I wanted to connect my WiFi computer to the share on my server via Samba. However, for some reason, my router treats the main router as WAN, not another device. I've tried disabling the SPI firewall: However, that doesn't work. I've tried pinging my WiFi computer from my server. However, I can ping my server from my WiFi computer. AFAIK, they are on the same subset, just using different IPs: the main one uses 192.168.0.x and the repeater uses 192.168.1.x (starting at 100 for some reason). It seems as I need to configure my router(s) to work together for DHCP. I noticed there was a "DHCP forwarder" option, but I have no idea what that would do. A quick note: for some reason (that's beyond me) my ISP disabled the capability to bridge a WiFi to ethernet connection with the router they provide (something about PPPoE or similar...). The service rep I talked to when I was having issues after I changed ISPs said that, but they couldn't explain exactly what they were "blocking." How can I get DD-WRT to not treat the client connection as WAN and the router to recognize the devices connected to the repeater?

    Read the article

  • Wifi Drops Connections with WPA2-PSK

    - by graf_ignotiev
    I run a small computer lab made up of 10 computers of identical hardware and software (Dell Latitudes with Windows 7 x64 Enterprise) and I use a ZyWALL 2WG as a router/firewall. Nine of the computers connect to the router over wifi using WPA2-PSK encryption while the last one is connected by ethernet cable. I'm having a problem where any computer connected to the wi-fi occasionally drops off the network (it cannot be pinged and the client cannot ping the gateway). It only happens on the wifi side and only when the encryption is WPA2-PSK or WPA-PSK. I tried using another router with a different make and model and had no problems. Thinking it could be a software error, I reset the router to factory defaults and installed the newest firmware (V4.04(AQI.8) | 04/09/2010), but still have the problem. The 802.1X log gives the following error User logout because of user disassociation. with this note WPA2-PSK:00242c582ece:logout where 00242c582ece is the mac address of the device. At this point I'm out of things to try and leads to follow. It looks like this user had the same or similar problem, but none of those proposed solutions work for me.

    Read the article

  • MySQL replication - rapidly growing relay bin logs

    - by Rob Forrest
    Morning all, I've got a really strange situation here this morning much like a reportedly fixed MySQL bug. http://bugs.mysql.com/bug.php?id=28421 My relay bin logs are rapidly filling with an infinite loop of junk made of this sort of thing. #121018 5:40:04 server id 101 end_log_pos 15598207 #Append_block: file_id: 2244 block_len: 8192 # at 15598352 #121018 5:40:04 server id 101 end_log_pos 15606422 #Append_block: file_id: 2244 block_len: 8192 # at 15606567 ... # at 7163731 #121018 5:38:39 server id 101 end_log_pos 7171801 #Append_block: file_id: 2243 block_len: 8192 WARNING: Ignoring Append_block as there is no Create_file event for file_id: 2243 # at 7171946 #121018 5:38:39 server id 101 end_log_pos 7180016 #Append_block: file_id: 2243 block_len: 8192 WARNING: Ignoring Append_block as there is no Create_file event for file_id: 2243 These log files grow to 1Gb within about a minute before rotating and starting again. These big files are interspersed with 1 or 2 smaller files with just this in /*!40019 SET @@session.max_insert_delayed_threads=0*/; /*!50003 SET @OLD_COMPLETION_TYPE=@@COMPLETION_TYPE,COMPLETION_TYPE=0*/; DELIMITER /*!*/; # at 4 #121023 9:43:05 server id 100 end_log_pos 106 Start: binlog v 4, server v 5.1.61-log created 121023 9:43:05 BINLOG ' mViGUA9kAAAAZgAAAGoAAAAAAAQANS4xLjYxLWxvZwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAEzgNAAgAEgAEBAQEEgAAUwAEGggAAAAICAgC '/*!*/; # at 106 #121023 9:43:05 server id 100 end_log_pos 156 Rotate to mysqld-relay-bin.000003 pos: 4 DELIMITER ; # End of log file ROLLBACK /* added by mysqlbinlog */; /*!50003 SET COMPLETION_TYPE=@OLD_COMPLETION_TYPE*/; We're running a master-master replication setup with the problematic server running mysql 5.1.61. The other server which is, for the moment, stable is running 5.1.58. Has anyone got any ideas what the solution is to this and moreover, what might have caused this?

    Read the article

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Black screen appears when booting new install of Ubuntu 11.10 on my desktop, cannot access Grub menu to fix

    - by izn
    I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

    Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >