Search Results

Search found 2020 results on 81 pages for 'hdd'.

Page 57/81 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• How to upgrade OS on Mac Mini with external USB Drive?

  - by David

  We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

  Read the article

• PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

  - by Jody

  This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

  Read the article

• How to customize Windows 7 HAL library during installation (BSOD STOP: 0x000000A5)?

  - by koldovsky

  While trying to install Windows 7 x86 Ultimate on Samsung M40 laptop (Pentium M 1.7 Dothan, 2 GB RAM/ 100 GB HDD) i receive BSOD STOP: 0x000000A5: The bios in this system is not fully ACPI compliant. Please contact your system vendor for an updated bios. The bios on the system is updated to latest version. If ACPI is the real source of the issue it means that I possibly could use another HAL library. In Windows XP it is possible to install system with generic HAL library pressing F7 when installer asks to supply drivers, but on Windows 7 I can't find such option. Ironically, Vista installs and works nice, even if they said that Windows 7 is less demanding for hardware. Windows 7 Advisor also tells nothing suspicious. Can anybody tell me how to customize Windows 7 installer to use generic HAL library (if it is possible, of course) or point me to another solution?

  Read the article

• Fujitsu Siemens V6535 laptop doesn't wake up - crash when going into standby?

  - by marc

  I'm having trouble with my laptop (Fujitsu Siemens model V6535). It runs Windows 7, and after I upgraded from Vista I've noticed something that makes me really angry. When my laptop goes into Standby, the power LED changes to red and starts blinking (standby mode). When I push the power button to wake it up it, the blinking LED changes to green but nothing else happens. Nothing on the display, no HDD sound. When I press the power button for a few seconds and then try turn it on again, it doesn't display anything. I have to unplug the charger, shut it off, and power it on again without the power cable. Then it starts working. A few days ago I upgraded the BIOS to the newest version, but it doesn't help. Does anyone have any idea what can be wrong?

  Read the article

• How to ship a server internationally?

  - by devians

  I have a fileserver that will need to be shipped internationally soon. I'm looking on advice for packing and recommendations on methods/companies. Should it be shipped whole, or in parts? How to pack it, precautions to take. Any way you slice it, it's going to be very heavy. Will this cause problems? Whats the best way to protect it from shock? It would be pointless for it to arrive with broken hdd's. If you've done this before, your hindsight would be invaluable.

  Read the article

• Operating System Not Found - BIOS recognizes, Live OS doesn't (Laptop)

  - by Klaus Borges

  Here's the deal: I have a multi-partitioned hard drive on my laptop set up with GRUB. I got a blue-screen while working on Windows 7 and when rebooting I got the Operating System Not Found error message. I rebooted the computer once again and entered the BIOS setup just to see if recognized my HDD - it did. Next step for me was booting a Live CD and seeing if I could repair GRUB or at least check if something changed on the partitions, but it doesn't seem to recognize anything there. Tried blkid, fdisk -l, not even GParted can see it. What should I do?

  Read the article

• MySQL won't stop doing stuff

  - by Felix

  Sorry for the title of the question, here's my problem: I've been trying to set up some scripts that import a lot of stuff hourly from an external source. They seemed to work fine, so I set up a cronjob to run them every hour. One day later I find six or seven instances of that script just hogging the MySQL server, making it unresponsive. I killed their processes, but MySQL was still not responding. I had to kill MySQL, reboot and then MySQL started working again (who knows on what) and being unresponsive (yes, I did remove the scripts from the cronjobs). I SHOW PROCESSLISTed and killed every process I could find. Still nothing, MySQL is hogging the HDD and is at the top of top and making the server load go up in the sky. I don't know what to do, if I kill and start it again it will probably do the same thing. What should I do?

  Read the article

• How do I import Outlook 2007 accounts and rules and IE usernames and stored passwords from old HD?

  - by raya

  I had an older PC running Win7 and the motherboard died on me. I've since updated my PC to another Win7 machine running a RAID 0 along with my old HDD installed as an extra drive. The problem is, I need to somehow import my Outlook email accounts (10) and rules along with my IE usernames and adjacent stored passwords for all the sites I've visited. I don't want to have to recreate the wheel for all this data. What I've found is that I have to run regedit in order to do so, but I cannot seem to boot to the old drive in order to run regedit and export the files. Can someone please help me?

  Read the article

• I have static noise in my speakers and headset

  - by Kazarion

  I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

  Read the article

• Different graphic cards drivers while booting from external media

  - by goran

  I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

  Read the article

• Network adapters reliability

  - by casey_miller

  Can you help me with understanding of reliability of network adapters. Most of the time servers do have at least 2 NIC's bonded to provide sort of a HA for it. So in case of one NIC fails, the second would still do the job. I wonder which factors work when you use network adapters. I know that, the most important and weakest part of any computer system is: storage (i.e HDD). but how reliable actually network adapters are? There are more expensive ones, and cheaper adapters. In which cases do they actually fail? In what circumstances. May it be a intensive usage of them Time when it's on In your experience how often you found yourself changing NIC's due to their fail? Or just what's the typical lifetime of commodity NIC's? thanks.

  Read the article

• Why does diskpart set the volume attributes on all volumes?

  - by Nick

  I was trying to migrate a Win7 OS from a HDD to a SSD. I've created 2 partition with 1024KB offset, with diskpart: 100MB System Reserved and a 60GB for C:. I've cloned their contents using Easeus Disk Copy. I've loaded the Windows 7 Boot DVD, and wanted to use diskpart to drop the letter for the System Reserved partition and make it hidden. select volume 0 detail volume attribute volume set nodefaultdriveletter attribute volume set hidden These 2 attribute set commands actioned on both volumes (0 and 1, MSR and C:) instead of the selected one, and viceversa. I've tried to clear these attributes from volume 1, but it cleared them also from volume 0. Why does DiskPart have this behaviour?

  Read the article

• Brocade 200E Switch - Fibre Channel

  - by Arthor

  What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

  Read the article

• UBUNTU.. GRUB problem

  - by pravinp

  Hi, I have/(had) windows xp on one partition of my hdd. on second i installed ubuntu 9.10 yesterday. and after reboot of windows xp i get error "GRUB LOADING.". now i know that you can play around with that using live GRUB and all. putting GRUB on top of MBR or etc etc. something like that. i want to know - if i reinstall Ubuntu 10.04 which is available now - will it give me still the same error? or i will be able to use both OS? (i.e. is that problem solved in version 10.04 or still there? and if it is solved reinstallation of ubuntu will solve the problem or not?) anyhelp is welcome. Thanks

  Read the article

• Windows 7 just restarts, no BSOD, shows "Event ID 14 volsnap"

  - by Mdc007

  My Windows 7 just restarts without giving me a BSOD. When it reboots, it will hang sometimes and you have to let it rest. Sometimes it will print a message saying that Hal.dll is missing or corrupt. When it does restart I can't run a backup or a clone drive – it comes up with constant errors. I tried to run chkdsk – it says everything's clean. What is really puzzling is SyncToy on a different drive hangs half way through and won't run either. Machine: OCZ SSD Agility 2 for C drive SATA HDD for programs, documents on D drive MSI AMD 880 chipset Event viewer says something about critical power failure I/O operations and "Event ID 14 volsnap" – but that is just telling me the computer powered off which I already know.

  Read the article

• Start a ZFS RAIDZ zpool with two discs then add a third?

  - by Doug S.

  Let's say I have two 2TB HDDs and I want to start my first ZFS zpool. Is it possible to create a RAIDZ with just those two discs, giving me 2TB of usable storage (if I understand it right) and then later add another 2TB HDD bringing the total to 4TB of usable storage. Am I correct or does there need to be three HDDs to start with? The reason I ask is I already have one 2TB drive I'm using that's full of files. I want to transition to a zpool but I'd rather only buy two more 2TB drives if I can. From what I understand, RAIDZ behaves similarly to RAID5 (with some major differences, I know, but in terms of capacity). However, RAID5 requires 3+ drives. I was wondering if RAIDZ has the same requirement. If I have to, I can buy the three drives and just start there, later adding the fourth, but if I could start with two and move to three that would save me $80.

  Read the article

• Ways to remotely reboot a Linux system

  - by dualed

  I had a remote server running Debian Sarge that experienced some HDD failure and I meant to reboot it hoping that fsck could repair the errors automatically. I eventually drove out there and replaced the faulty disks... But I was wondering: What other ways are there to force a Linux system to reboot that do not require hard drive access? What I had tried: shutdown -r now Did not work, as shutdown is a program that would have to be loaded from disk, the error shown in the terminal was bash: /sbin/shutdown: Input/output error init 6 same as above telinit q same as above kill -2 1 This did not print an error, but did not work either. (However, it is possible that the Sarge init did not implement SIGINT, the sarge manpages did not mention it. So it could work in a more recent version of Debian) This guide on PCFreak.net. However, this failed at sysctl, which was not in memory either.

  Read the article

• Windows 8 install shows NTFS partition but asks for driver

  - by Guillermo Orellana Ruiz

  I have an Asus Eee PC 900HA, and I tried to install Windows 8 on it, so I created a 56GB NTFS partition and booted install from USB When I get to install it, says "some drivers are missing", but when I click Explore button, I can see the NTFS partition. I have updated the BIOS to its lastest version in Asus Support, loaded setup defaults, downloaded all the drivers I saw there and put them into the USB, but keeps asking for drivers. The BIOS has no option for the HDD to be IDE or AHCI, only Auto, ARMD and CDROM are available. Thank you very much.

  Read the article

• Is SATA bandwith per Port or per Controller?

  - by instanceofTom

  I always assumed that it was per Controller channel, and that If I have 4xSATA 3.0Gb/s ports on my Motherboard then I should have a potential 12.0Gb/s of bandwith. However, after doing some searching I found conflicting information suggesting that if I had 4xSATA drives connected to my MB and were using them simultaneously each drive would get only 3.0Gb/s /4 = 768 Mb/s max bandwith. So I wanted to clear up my understanding. Side question: Are there other hdd/ssd bandwith bottlenecks to be aware of? (Links to already answered questions are more than welcome)

  Read the article

• Serve my website from different server during downtime

  - by nfedyashev.mp

  I have a VPS server running in the cloud. Fully automated server image upgrade/downgrade(by RAM/HDD plans). The problem is that server upgrade/downgrade takes time and involves total unavailability during this period(up to 30 minutes). Goal: during this downtime server my website(http://mydomain.here) from different server with some message like "Under construction". How can I do this? -- mydomain.here is hosted on godaddy and uses its DNS(If I call it right). It's pointing with A-record to my VPS's IP address now. Change in these DNS settings will take more than 30minutes, so it's not an option. How can I find mode "dynamic" DNS? What should I learn?

  Read the article

• backing up ntfs disk using rsync on ubuntu

  - by user70366

  For a long time I was using windows. I have a separate drive I use to keep copies of my media files, photos etc. on, which I periodically backup to an external drive. In Windows I used SyncToy to do this. After my Windows stopped booting, I decided to switch to Linux (Ubuntu 10.10). That seems to be going fine, but now I want to backup my drive to the external drive like before. Mostly the two drives will be already the same with maybe about 10GB of extra files added. So I try to use rsync to synchronise the two drives like this: rsync --dry-run -rvlt --modify-window=1 /media/Antonio1TB/Backup /media/FREECOM\ HDD/Backup The problem is the dry run indicates that every file on the drive will be copied. Not just the files I have recently added. What is the correct command to synch two NTFS drives under Ubuntu so that files that already exist don't get copied again? Thanks.

  Read the article

• Firewire 800 with Windows

  - by Amitesh

  I have two windows machine with windows server 2003 installed on them. I am running a Lab View script on 1 machine and storing the data. But since it has less memory, I want to transfer data to another machine using firewire 800. Is it possible to configure out the second machine just as an external HDD attached to it and write data directly to it? (This is possible with MACs) Dont want to use the ethernet (internet/ TCP/IP prot.) to transfer the data. Is it possible? Thanks.

  Read the article

• Any Suggestions on How to Soup Up/ Mod a MacBook Pro 13"?

  - by 5arx

  So I've got a mid-2009 MacBook Pro 13". Integrated GPU so not a games machine but fast enough for doing .Net development in VMs. I love the little thing and wanted to give it a Christmas present so thought I'd mod it up a bit and give it a boost. I'm probably going to go for a 500GB Seagate Momentus XT hybrid drive rather than full-on SSD (I need 500GB space) but was wondering if there are any other mods/tweaks people could suggest? I saw something online about swapping a HDD for the DVD drive and wondered if anyone had tried this or similarly drastic mods to the smallest of the MBPs. Cheers.

  Read the article

• Making a hidden truecrypt volume with existing data

  - by Bill Grey

  I have a 1TB hdd, which I would like to encrypt. I would like to make a hidden volume, with almost nothing within but some decoy data, and the rest in a hidden volume. However, my driver is over 95% full. Is it still possible to do this, or would it have to be done on an empty drive, and then copy the data over? I could not find the answer to this question in the documentation. Also, how easy would it be to undo, or unencrypt the drive? Would it again need another empty drive to begin with?

  Read the article

• Firefox, Thunderbird, Safari - hangs up on start

  - by takeshin

  I have a strange problem on Windows Vista (Automatic updates). Long time ago I had installed Firefox, Thunderbird, Safari and Opera and they all worked well. Once upon a time, after Windows restart, Firefox, Thunderbird and Safari won't start. [Opera (USB) works fine]. When I start the browser, program name is listed on the processes list, but it is not activated, doesn't show any window. I tried crating new profiles with -ProfileManager, restarting Windows, reinstalling the browsers. I scanned the system for suspected programs and it looks clean. There is 45GB of free HDD space. WTF?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >