Search Results

Search found 18096 results on 724 pages for 'let'.

Page 571/724 | < Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >

  • When is a good time to start thinking about scaling?

    - by Slokun
    I've been designing a site over the past couple days, and been doing some research into different aspects of scaling a site horizontally. If things go as planned, in a few months (years?) I know I'd need to worry about scaling the site up and out, since the resources it would end up consuming would be huge. So, this got me to thinking, when is the best time to start thinking about, and designing for, scalability? If you start too early on, you could easily over complicate your design, and make it impossible to actually build. You could also get too caught up in the details, the architecture, whatever, and wind up getting nothing done. Also, if you do get it working, but the site never takes off, you may have wasted a good chunk of extra effort. On the other hand, you could be saving yourself a ton of effort down the road. Designing it from the ground up to be big would make it much easier later on to let it grow big, with very little rewriting going on. I know for what I'm working on, I've decided to make at least a few choices now on the side of scaling, but I'm not going to do a complete change of thinking to get it to scale completely. Notably, I've redesigned my database from a conventional relational design to one similar to what was suggested on the Reddit site linked below, and I'm going to give memcache a try. So, the basic question, when is a good time to start thinking or worrying about scaling, and what are some good designs, tips, etc. for when doing so? A couple of things I've been reading, for those who are interested: http://www.codinghorror.com/blog/2009/06/scaling-up-vs-scaling-out-hidden-costs.html http://highscalability.com/blog/2010/5/17/7-lessons-learned-while-building-reddit-to-270-million-page.html http://developer.yahoo.com/performance/rules.html

    Read the article

  • Manipulating / Resizing / Scaling an image in vb.net

    - by Christian Payne
    Imagine I have a rectangle say 400px x 300px. Then let’s say I want to load an image in that. All of this is very easy using Sytem.Drawing.DrawImage. But then I want to leave the left hand side as 300px but change the right hand side to 250 px. I can draw the box using 4 DrawLines but I don’t know how to squash the image into the new shape. I want the right hand side of the shape to be 250, the left size 300 and the top and bottom 400px. I can’t use DrawImage as it expects the left and right sizes to be the same. Is there a way to manipulate the image into the new shape? I've looked at other questions, but they only apply where the left and right hand side is equal. Any thoughts on how to squash an image into a shape which did not have parallel sides? (If it helps, I'm happy to sacrifice image quality to fit the right shape.)

    Read the article

  • On-Demand thumbnail creation with django and nginx

    - by sharjeel
    I want to generate thumbnails of images on the fly. My site is built with django and deployed using nginx which serves all the static content and communicates with django/apache using reverse proxy. Right now, for every image in my site, I generate all required sizes of thumbnails on-hand and deliver them when required. The problem is that whenever I change the size of a thumbnail, I have to regenerate all of them (and they are tons). However now I'd like to generate the thumbnail the first time it is accessed and later on nginx would deliver the same file over n over. If I delete that thumbnail file because of lesser accesses, it should get generated automatically the next time. Thumbnails in my case also have watermarks which require some computation logic of my application so a webserver thumbnail module might not work very well. The size of the thumbnail can be embedded in the URL. So http://www.example.com/thumbnail/abc_320x240.jpg gets the 320x240 size of the thumbnail. The approach I'm looking right now is to let nginx lookup the file and if it doesn't exist, forward the query to my django application which would create the thumbnail and send either the response or a redirect string. However I'm not sure about the concurrency issues and any other issues which might pop up later. What is the appropriate way to achieve this?

    Read the article

  • php parsing speed optimization

    - by Arnaud
    I would like to add tooltip or generate link according to the element available in the database, for exemple if the html page printed is: to reboot your linux host in single-user mode you can ... I will use explode(" ", $row[page]) and the idea is now to lookup for every single word in the page to find out if they have a related referance in this exemple let's say i've got a table referance an one entry for reboot and one for linux reboot: restart a computeur linux: operating system now my output will look like (replaced < and by @) to @a href="ref/reboot"@reboot@/a@ your @a href="ref/linux"@linux@/a@ host in single-user mode you can ... Instead of have a static list generated when I saved the content, if I add more keyword in the future, then the text will become more interactive. My main concerne and question is how can I create a efficient enough process to do it ? Should I store all the db entry in an array and compare them ? Do an sql query for each word (seems to be crazy) Dump the table in a file and use a very long regex or a "grep -f pattern data" way of doing it? Or or or or I'm sure it must be a better way of doing it, just don't have a clue about it, or maybe this will be far too resource un-friendly and I should avoid doing such things. Cheers!

    Read the article

  • Adding and removing elements efficiently from Collection object

    - by user569125
    Hi, Below coding is the working sample,but still i am not happy with this code with related to performancewise.Please have a look and let me know if any better approach is there.Thanks in advance. Adding items to the arraylist object String resultItems[] = paging.getMoveLeftArray().split(","); String fields[]={"id","name","name1"}; leftObj=new ArrayList(); for(int i=0;i<resultItems.length;i++){ //below line mea TestVO bean=new TestVO(); String resultItem = resultItems[i]; String idANDname[] = resultItem.split("@"); String id = idANDname[0]; // name or id should not contain "-" String name[] = idANDname[1].split("-"); //values and fileds are always having same length for(int j=0;j<name.length;j++) { PropertyUtils.setProperty(bean, fields[j], name[j]); } leftObj.add(bean); } Removing items from the arraylist object:availableList contains all the TestVO objects: String []removeArray=paging.getMoveRightArray().split(","); tempList=new CopyOnWriteArrayList(); newTempList=new CopyOnWriteArrayList(); for(int i=0;i<availableList.size();i++){ boolean flag = false; TestVO tempObj = (TestVO )availableList.get(i); int id =(Integer)tempObj.getId(); // System.out.println("id value"+id); // availableList.get(i).getClass().getField(name); for(int j=0;j<removeArray.length;j++){ String resultItem = removeArray[j]; String idandname[] = resultItem.split("@"); for(int k=0;k<idandname.length;k++){ String ids[]=idandname[0].split("-"); if(id==Integer.parseInt(ids[0])){ flag = true; break; } } } if(flag){ tempList.add(tempObj); } else{ newTempList.add(tempObj); }

    Read the article

  • Ubuntu server or Debian server (to run C++ apps developed on Ubuntu)

    - by skyeagle
    I have written a number of C++ server side daemons for my website, using my Ubuntu 9.10 dev machine. I am now about to venture out to look for a hosting provider etc. This is my problem: I have read on many posts (admittedly old posts) that Debian server is much more robust than Ubuntu server - is this till the case?. In particular, I am constantly "raising elephants" with my Ubuntu 9.10 - this is "ok" for home use, but for a website server, I would not be so forgiving. Also, there seems to be a new "patch" every few weeks - which I would not like on a server (I want to leave the server well alone, and let it get on with its business of serving pages). So in this instance Debian looks a more attractive proposition. I am worried that the C++ apps I have developed on Ubuntu may not be binary compatable with Debian (or I may need to install additional libraries/packages etc to get things to work), and I have zero experience with Debian. Additionally, I dont want to be grappling with the learning curve associated with a new OS, whilst trying to launch a new web site (I am assuming Debian UI is quite different from Ubuntu). In this case, the maxim "the devil you know is better than the one you dont", seems appropriate - and I find Ubuntu a more attractive proposition (atleast I know my apps will run without any probs etc). Can anyone provide some rational advice (based on actual experience), to help me decide which route to take - given the two (conflicting) trains of thought outlined above?

    Read the article

  • Do complex JOINs cause high coupling and maintenance problems ?

    - by ashkan.kh.nazary
    Our project has ~40 tables with complex relations.A colleague believes in using long join queries which enforces me to learn about tables outside of my module but I think I should not concern about tables not directly related to my module and use data access functions (written by those responsible for other modules) when I need data from them. Let me clarify: I am responsible for the ContactVendor module which enables the customers to contact the vendor and start a conversation about some specific product. Products module has it's own complex tables and relations with functions that encapsulate details (for example i18n, activation, product availability etc ...). Now I need to show the product title of some product related to some conversation between the vendor and customers. I may either write a long query that retrieves the product info along with conversation stuff in one shot (which enforces me to learn about Product tables) OR I may pass the relevant product_id to the get_product_info(int) function. First approach is obviously demanding and introduces many bad practices and things I normally consider fault in programming. The problem with the second approach seems to be the countless mini queries these access functions cause and performance loss is a concern when a loop tries to fetch product titles for 100 products using functions that each perform a separate query. So I'm stuck between "don't code to the implementation, code to interface" and performance. What is the right way of doing things ? UPDATE: I'm specially concerned about possible future modifications to those tables outside of my module. What if the Products module decided to change the way they are doing things? or for some reason modify the schema? It means some other modules would break or malfunction until the change is integrated to them. The usual ripple effect problem.

    Read the article

  • how would you like computer science classes to be taught?

    - by aaa
    hello I am a graduate student now, and hopefully someday I will teach. my interests are C++, Python, embedded languages, and scientific computing. Meanwhile I daydream about how I would teach. I was not quite happy with my undergraduate university as I found many computer science classes lacking. so I would like to ask you, if you were a student, how would you like your computer science classes to be taught? I understand it is a very subjective question, but nevertheless I think it's important to know what people want. Some specific points I am interested in: should computer languages be taught explicitly, or should students be required to pick up language on their own? what is better for learning, tests, projects, some sort of take-home exam? how do you think classtime should be used? theory, introduction, explanations, etc.? do you think the group projects are important? how much about computer architecture do you want to learn in computer science class, not necessarily assembler class. should particular operating system/editor be mandated or encouraged? Thanks thank you for your comments. Question has been closed because it is a discussion question rather than Q&A. If you know appropriate website for discussions of such sort with low noise ratio, please let me know.

    Read the article

  • jsf messed up links

    - by Mateusz
    I'm new to JSF. My application is working, but I'm confused with links in browser when using controller. BTW, there is also PrimeFaces in my app so don't be suprised with p: tags. Let's say I have 'list' and 'show' pages with controller doing redirection between them. First I'm on http://localhost:8080/y/r/conversation/list.xhtml page. There is link created with line <p:commandLink action="#{lazyConversationBean.doShow(conv)}" ajax="false" value="View"/>. lazyConversationBean acts here as my Controller. There is method: public String doShow(Conversation c) { this.setSelectedConversation(c); return "view"; } from which I got redirected to ...... again http://localhost:8080/y/r/conversation/list.xhtml (browser shows it) even when it's correct http://localhost:8080/y/r/conversation/view.xhtml page. There I have link <p:commandButton action="#{lazyConversationBean.doList()}" ajax="false" value="Back to list"/> and again controller has method: public String doList() { return "list"; } from which I got redirected to ... yeah, you guessed right ... http://localhost:8080/y/r/conversation/view.xhtml (that is again what browser shows) even when again it is correct http://localhost:8080/y/r/conversation/list.xhtml page. It seams as browser link area is always one step behind page currently being displayed. I don't even know if it's some incorrect behaviour as I have no idea how to query google for this :D Just for test I did this short tutorial, where netbeans created whole stack of code on one of my entities, and behaviour was the same, so it's not PrimeFaces magic related. Can you tell my why it happens, and how to fix it? Users likes to copy correct links ;)

    Read the article

  • SQL Server Express performance issue

    - by Developer IT
    Hi folks ! I know my questions will sound silly and probably nobody will have perfect answer but since I am in a complete dead-end with the situation it will make me feel better to post it here. So... I have a SQL Server Express database that's 500 Mb. It contains 5 tables and maybe 30 stored procedure. This database is use to store articles and is use for the Developer It web site. Normally the web pages load quickly, let's say 2 ou 3 sec. BUT, sqlserver process uses 100% of the processor for those 2 or 3 sec. I try to find which stored procedure was the problem and I could not find one. It seems like every read into the table dans contains the articles (there are about 155,000 of them and 20 or so gets added every 15 minutes). I added few index but without luck... It is because the table is full text indexed ? Should I have order with the primary key instead of date ? I never had any problems with ordering by dates.... Should I use dynamic SQL ? Should I add the primary key into the url of the articles ? Should I use mutiple indexes for seperate columns or one big index ? I you want more details or code bits, just ask for it. Basicly, every little hint is much apreciated. Thanks.

    Read the article

  • VS2010: Why do my custom Toolbox tabs and contained controls keep disappearing?

    - by Velika2
    This is how I expected the toolbox to work: Let's say I add a custom Tab to the Toolbox called "Ajaxtoolkit." To add controls to the new tab, I right mouse click and select "Choose Items" and browse to a file, Ajaxtoolkit.dll, that is of a particular version number. I would expect that when I save and reopen the solution, that the Ajax Toolkit custom tab would still be in my Toolbox and that it would contain the same controls that were there last time, the controls that were in the dll that I referenced when the controls were added. If I created a brand new web app, I (possibly) wouldn't expect to see the same Ajax Toolkit custom tab. However, I could perform the same steps as above and add a "Ajax Toolkit" tab and perhaps, this time, select a DIFFERENT VERSION of the tookit, and the state of the toolkit would be retained with each solution file. Another possibility would be for the original Ajaxtoolkit to be retained when the 2nd web solution is created, and perhaps, if I wanted to mix versions of the toolkit across diffreent web sites in my solution, I should start naming my custom toolkit tabs with version specific names like "Ajaxtoolkit 4.0," etc. ...But instead, the Ajaxtoolkit tab disappears when I close VS2010 and reopen it. Why? Is this desirable behavior or a bug?

    Read the article

  • How do I design a Wizard-based system with SoC in mind?

    - by Erik Forbes
    I'm building a Windows Forms system (in C# if it matters to anyone) that provides an application automation service. As this application is targeted at users who are not computer savvy, I've decided to break up the functions of the application into various tasks, and provide these tasks via a wizard UI. I'd like to avoid coupling the views and view engine (from which the Wizard will be built) to the automation engine. The problem I'm having is that the automation engine, which runs on a separate thread while it does its thing, needs to report status information back to the user, as well as listen for cancel or pause events from the user. Since I don't want the view engine or the automation engine to rely on each other, I'm having a hard time figuring out how to provide for this information conduit. Any insights into this issue I'm having would be greatly appreciated. I've been wracking my brain for a couple weeks now on this point, and I really don't want to give up and just couple everything together. If anyone needs additional details to help come up with some sort of idea please let me know and I'll be happy to provide them.

    Read the article

  • Paypal Error - IPN Validation Failed.

    - by user504178
    Hello , I am getting below error. [12/26/2010 5:48 AM] - FAIL: IPN Validation Failed. IPN POST Vars from Paypal: auth=A76zglTH7sCSLAVjZISTEp38SYXWAoNlO1uurxDvnlFy40uy-mlrvqkp_S5q3bFhVBbO2GwpJRvdYDvfQuM0581EYkEITS1SnDzfWV-ju60OZm_VzHsc8o2Q8K7mmZuDs9ANFwW9iIP2Ig8fGPSwZN8APK2PtCMIda28rBnNMJ2FWaeNKgmzTCuG5HnpzLD7ZtTCElp4MC05kyx9Ro-9ggqzVx7OU1zleJ_c1W, form_charset=UTF-8, IPN Response from Paypal Server: HTTP/1.1 200 OK Date: Sun, 26 Dec 2010 10:48:50 GMT Server: Apache Set-Cookie: c9MWDuvPtT9GIMyPc3jwol1VSlO=Ejohjh-kFgFpKAeNiYlgG8LwsLOi5Sir4Ut7tXINWaRmWM2eNXfFkJRQmO09WqBbXWIpXd0ydzrS7JMWO0sHZMg0Wfdd4gt6UcpSswiiUl2EfiP_ykxKJOFOzcjMrn_6xzc8GG%7c5mvwkJOzeFg-vpKR1fovKAVDyvmzI5sFbPatUC6gbf9Wk4Llel4btOJa7uQbYSLhuprHVG%7c537g5xvn4Hns8l-HE1pnyQ2GUAxcSINm-oVJENMuU6yS_bYa4IAw4QlGP-0zq80pjZa5j0%7c1293360531; domain=.paypal.com; path=/ Set-Cookie: cookie_check=yes; expires=Wed, 23-Dec-2020 10:48:51 GMT; domain=.paypal.com; path=/ Set-Cookie: navcmd=_notify-validate; domain=.paypal.com; path=/ Set-Cookie: navlns=0.0; expires=Sat, 21-Dec-2030 10:48:51 GMT; domain=.paypal.com; path=/ Set-Cookie: Apache=10.191.196.11.222161293360530699; path=/; expires=Sat, 12-Nov-04 04:20:34 GMT Connection: close Transfer-Encoding: chunked Content-Type: text/html; charset=UTF-8 7 INVALID 0 Can anyone please let me know whats wrong over here. Regards, Atul

    Read the article

  • substitution cypher with different alphabet length

    - by seanizer
    I would like to implement a simple substitution cypher to mask private ids in URLs I know how my IDs will look like (combination of upperchase ascii, digits and underscore), and they will be rather long, as they are composed keys. I would like to use a longer alphabet to shorten the resulting codes (I'd like to use upper and lower case ascii letters, digits and nothing else). So my incoming alphabet would be [A-Z0-9_] (37 chars) and my outgoing alphabet would be [A-Za-z0-9] (62 chars) so a compression of almost 50% would be available. let's say my URLs look like this: /my/page/GFZHFFFZFZTFZTF_24_F34 and I want them to look like this instead: /my/page/Ft32zfegZFV5 Obviously both arrays would be shuffled to bring some random order in. This does not have to be secure. if someone figures it out: fine, but I don't want the scheme to be obvious. My desired solution would be to convert the string to an integer representation of radix 37, convert the radix to 62 and use the second alphabet to write out that number. is there any sample code available that does something similar? Integer.parseInt ( http://java.sun.com/javase/6/docs/api/java/lang/Integer.html#parseInt%28java.lang.String,%20int%29 ) has some similar logic, but it is hard-coded to use standard digit behavior Any hints? I am using java to implement this but code or pseudo-code in any other language is of course also helpful

    Read the article

  • Where to post code for open source usage?

    - by Douglas
    I've been working for a few weeks now with the Google Maps API v3, and have done a good bit of development for the map I've been creating. Some of the things I've done have had to be done to add usability where there previously was not any, at least not that I could find online. Essentially, I made a list of what had to be done, searched all over the web for the ways to do what I needed, and found that some were not(at the time) possible(in the "grab an example off the web" sense). Thus, in my working on this map, I have created a number of very useful tools, which I would like to share with the development community. Is there anywhere I could use as a hub, apart from my portfolio ( http://dougglover.com ), to allow people to view and recycle my work? I know how hard it can be to need to do something, and be unable to find the solution elsewhere, and I don't think that if something has been done before, it should necessarily need to be written again and again. Hence open source code, right? Firstly, I was considering coming on here and asking a question, and then just answering it. Problem there is I assume that would just look like a big reputation grab. If not, please let me know and I'll go ahead and do that so people here can see it. Other suggestions appreciated. Some stuff I've made: A (new and improved) LatLng generator Works quicker, generates LatLng based on position of a draggable marker Allows searching for an address to place the marker on/near the desired location(much better than having to scroll to your location all the way from Siberia) Since it's a draggable marker, double-clicking zooms in, instead of creating a new LatLng marker like the one I was originally using The ability to create entirely custom "Smart Paths" Plot LatLng points on the map which connect to each other just like they do using the actual Google Maps Using Dijkstra's algorithm with Javascript, the routing is intelligent and always gives the shortest possible route, using the points provided Simple, easy to read multi-dimensional array system allows for easily adding new points to the grid Any suggestions, etc. appreciated.

    Read the article

  • ASP.NET MVC Newbie: why isn't my model available when creating a strongly-typed view?

    - by Rax Olgud
    I'm starting with ASP.NET MVC, and working with NerdDinner as reference. I did the following: Created a new project Added a couple of tables Created LINQ to SQL for them Created a new controller My Models directory now contains MyModel.dbml, under which I have MyModel.designer.cs, that contains classes for models relating to both of my tables (let's call them Categories and Products). Now, under my new controller, I would like to create a strongly typed view. So for example I have the following code in my controller (for my application I must work by name, and the "Name" field is unique): public ActionResult Details(string name) { MyModelDataContext db = new MyModelDataContext(); Product user = db.Products.Single(t => t.Name == name); return View(user); } I would like to create a strongly-typed view. So I right-click the line "return View(user)", and choose "Add View...". I click "Create a strongly-typed view". When I click the dropdown of "View data class", I don't see my models, but only: MyProject.Controllers.AccountMembershipService MyProject.Controllers.FormsAuthenticationService What am I missing?

    Read the article

  • Designing a silverlight dashboard with mef - is it possible? (with dynamic loading of xaps)

    - by Tim Robbin
    Hello! I am just trying to wrap my head around MEF. And as I am really going to love it ( I guess ) I started my first sample project and immediatly stumbled into a big problem and now I am asking myself if I can use MEF for my scenario at all and that is the following: Imagine that one got some kind of dashboard with, let's say, five regions and above each region there are two comboboxes. The values in the first combobox represent different possible views (for example, chartControl, tableControl, pictureControl, ...) and the values of the second combobox represents the different data sources for the currently selected control. As the controls are very big in size one wants to download them as needed. If the user selects one comboboxitem the corresponding control xap should be loaded and displayed in this specific region. If the user selectes another control in the same combobox the control should be removed from the visualtree and the next control should be downloaded and displayed. If the user changes the selection in a different combobox the corresponding control should be loaded again only in this specific region, with perhaps different data. And to make it a little more interesting - as this is some kind of dashboard one can change the layout from five regions to - for example - ten regions. I've seen the video "MVVM with MEF in Silverlight Video Tutorial Part 2: Plugins and Metadata" ( http://csharperimage.jeremylikness.com/2010/03/mvvm-with-mef-in-silverlight-video_09.html ) but he is using an ItemsControl and is working with Visibility and he only got ONE region. So I think that this technique is not working for me... Puh, I hope I could make myself clear! Thanks a lot for any piece of information!!! Greetings, Tim.

    Read the article

  • How to customize the process employed by WCF when serializing contract method arguments?

    - by mark
    Dear ladies and sirs. I would like to formulate a contrived scenario, which nevertheless has firm actual basis. Imagine a collection type COuter, which is a wrapper around an instance of another collection type CInner. Both implement IList (never mind the T). Furthermore, a COuter instance is buried inside some object graph, the root of which (let us refer to it as R) is returned from a WCF service method. My question is how can I customize the WCF serialization process, so that when R is returned, the request to serialize the COuter instance will be routed through my code, which will extract CInner and pass it to the serializer instead. Thus the receiving end still gets R, only no COuter instance is found in the object graph. I hoped that http://stackoverflow.com/questions/2220516/how-does-wcf-serialize-the-method-call will contain the answer, unfortunately the article mentioned there (http://msdn.microsoft.com/en-us/magazine/cc163569.aspx) only barely mentions that advanced serialization scenarios are possible using IDataContractSurrogate interface, but no details are given. I am, on the other hand, would really like to see a working example. Thank you very much in advance.

    Read the article

  • Insert HTML on Radio Label on Formtastic

    - by Adrian Matteo
    I have a form that has a radio button on it (Formtastic), and It works just fine with the :collection I'm passing. The problem is I want some part of the text to be affected by some CSS, but the :collection attribute does not let me put in HTML. Here's my code: = subscription.input :plan_type_id, :as => :radio, :label => false, :wrapper_html => {:class => "plan_type"}, :collection => { @plans[:premium_yearly][:description]+number_to_currency(@plans[:premium_yearly][:amount], :precision => 2) => @plans[:premium_yearly][:value], @plans[:premium_monthly][:description]+number_to_currency(@plans[:premium_monthly][:amount], :precision => 2) => @plans[:premium_monthly][:value] } Has you may may see, I build the label I want to show with my @plans variable and the :collection attribute. Is there any way I can modify the way it renders the label, I want to put some css to some part of the label. I want something like this: = subscription.input :plan_type_id, :as => :radio, :label => false, :wrapper_html => {:class => "plan_type"}, :collection => { @plans[:premium_yearly][:description]+'<b>'+number_to_currency(@plans[:premium_yearly][:amount], :precision => 2)+'<\\b>' => @plans[:premium_yearly][:value], @plans[:premium_monthly][:description]+'<b>'+number_to_currency(@plans[:premium_monthly][:amount], :precision => 2)+'<\\b>' => @plans[:premium_monthly][:value] } Thanks in advanced.

    Read the article

  • Floating Point Arithmetic - Modulo Operator on Double Type

    - by CrimsonX
    So I'm trying to figure out why the modulo operator is returning such a large unusual value. If I have the code: double result = 1.0d % 0.1d; it will give a result of 0.09999999999999995. I would expect a value of 0 Note this problem doesn't exist using the dividing operator - double result = 1.0d / 0.1d; will give a result of 10.0, meaning that the remainder should be 0. Let me be clear: I'm not surprised that an error exists, I'm surprised that the error is so darn large compared to the numbers at play. 0.0999 ~= 0.1 and 0.1 is on the same order of magnitude as 0.1d and only one order of magnitude away from 1.0d. Its not like you can compare it to a double.epsilon, or say "its equal if its < 0.00001 difference". I've read up on this topic on StackOverflow, in the following posts one two three, amongst others. Can anyone suggest explain why this error is so large? Any any suggestions to avoid running into the problems in the future (I know I could use decimal instead but I'm concerned about the performance of that).

    Read the article

  • Code-Golf: one line PHP syntax

    - by Kendall Hopkins
    Explanation PHP has some holes in its' syntax and occasionally in development a programmer will step in them. This can lead to much frustration as these syntax holes seem to exist for no reason. For example, one can't easily create an array and access an arbitrary element of that array on the same line (func1()[100] is not valid PHP syntax). The workaround for this issue is to use a temporary variable and break the statement into two lines, but sometimes that can lead to very verbose, clunky code. Challenge I know of a few of these holes (I'm sure there are more). It is quite hard to even come up with a solution, let alone in a code-golf style. Winner is the person with in the least characters total for all four Syntax Holes. Rules Statement must be one line in this form: $output = ...;, where ... doesn't contain any ;'s. Only use standard library functions (no custom functions allowed) Statement works identically to the assumed functional of the non-working syntax (even in cases that it fails). Statement must run without syntax error of any kind with E_STRICT | E_ALL. Syntax Holes $output = func_return_array()[$key]; - accessing an arbitrary offset (string or integer) of the returned array of a function $output = new {$class_base.$class_suffix}(); - arbitrary string concatenation being used to create a new class $output = {$func_base.$func_suffix}(); - arbitrary string concatenation being called as function $output = func_return_closure()(); - call a closure being returned from another function

    Read the article

  • Zend framework controller action helper

    - by guptanikhilchandra
    I am getting fatal error after adding the action helper class. I am trying to load layout corresponding to called layout. Following is my code snippet: First of all i added a helper class under application/controller/helpers: class Zend_Controller_Action_Helper_Layout extends Zend_Controller_Action_Helper_Abstract { public $pluginLoader; public function __construct() { // TODO Auto-generated Constructor $this->pluginLoader = new Zend_Loader_PluginLoader (); } public function preDispatch() { $bootstrap = $this->getActionController()->getInvokeArg('bootstrap'); $config = $bootstrap->getOptions(); $module = $this->getRequest()->getModuleName(); if (isset($config[$module]['resources']['layout']['layout'])) { $layoutScript = $config[$module]['resources']['layout']['layout']; $this->getActionController()->getHelper('layout')->setLayout($layoutScript); } } } Then i added a loader in bootstrap.php: protected function _initLayoutHelper() { $this->bootstrap('frontController'); Zend_Controller_Action_HelperBroker::addPath(APPLICATION_PATH .'/controllers/helpers'); $layout = Zend_Controller_Action_HelperBroker::addHelper(new Zend_Controller_Action_Helper_Layout()); } Following is my application.ini: [production] autoloaderNamespaces.tree = "Tree_" phpSettings.display_startup_errors = 0 phpSettings.display_errors = 0 includePaths.library = APPLICATION_PATH "/../library" bootstrap.path = APPLICATION_PATH "/Bootstrap.php" bootstrap.class = "Bootstrap" resources.frontController.controllerDirectory = APPLICATION_PATH "/controllers" resources.frontController.moduleDirectory = APPLICATION_PATH "/modules" resources.frontController.helperDirectory = APPLICATION_PATH "/controllers/helpers" resources.modules[] = "" contact.resources.frontController.defaultControllerName = "index" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.layout.layout = layout admin.resources.layout.layout = admin admin.resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view[] = [staging : production] [testing : production] phpSettings.display_startup_errors = 1 phpSettings.display_errors = 1 [development : production] phpSettings.display_startup_errors = 1 phpSettings.display_errors = 1 While running this code i am getting following errors: Warning: include(Zend\Controller\Action\Helper\LayoutLoader.php) [function.include]: failed to open stream: No such file or directory in D:\personal\proj\renovate\library\Zend\Loader.php on line 83 Warning: include() [function.include]: Failed opening 'Zend\Controller\Action\Helper\LayoutLoader.php' for inclusion (include_path='D:\personal\proj\renovate\application/../library;D:\personal\proj\renovate\library;.;C:\php5\pear') in D:\personal\proj\renovate\library\Zend\Loader.php on line 83 Fatal error: Class 'Zend_Controller_Action_Helper_LayoutLoader' not found in D:\personal\proj\renovate\application\Bootstrap.php on line 33 Kindly let me know, how can i come out from this issue. I am beginner in Zend Framework. Thanks Nikhil

    Read the article

  • after .htaccess url rewrite, cannot perform logoff in some of the url rewrited page

    - by Patrick
    Recently, I was doing .htaccess url rewrite, make all my php url into html, in some page, the logout button wont work properly. for example, in page ‘quotedetails/Q9999.html’ (rewrited from ‘quotedetails.php?quoteID=Q9999'), when I click logout button in this page, it wont do the trick, but when i use the old php url of this page, it works again, other rewrited pages like index.html (index.php), search.html(search.php), all works perfectly. I use firebug to debug, after I click the logout button, it stays in the same page without redirect me to the index.html, but I saw the the ‘logoff’ params has been passed through, but just dont let me logout and redirect to index page. I’ve changed all the relavent file path to absolute path, still no luck…..help please. I’ve also noticed from firebug, that page cannot get the redirect ‘location’ as I tried in other pages, their response headers come with ‘location: index.html’, but in that no-workin-page, there is no such line called ‘location: index.html’ in its response headers. Here is my .htaccess file, no-workin-pages are related to the first four ReweiteRules Options +FollowSymlinks RewriteEngine on RewriteRule ^reps/all,all.html$ rep.php?repID=all&repName=all RewriteRule ^reps/([A-Z]+),([A-Za-z\sA-Za-z]+).html$ rep.php?repID=$1&repName=$2 RewriteRule ^reps/([A-Za-z]+),([A-Za-z\sA-Za-z]+),([0-9]+).html$ rep.php?repID=$1repName=$2&page=$3 RewriteRule ^quotedetails/(Q[0-9]+).html$ quotedetails.php?quoteID=$1 RewriteRule ^index.html$ index.php RewriteRule ^addquote.html$ addquote.php RewriteRule ^search.html$ search.php RewriteRule ^viewall.html$ viewall.php RewriteRule ^howto.html$ howto.php

    Read the article

  • Create associative multi-dimensional array

    - by Mike
    Hi, I have 3 variables, each one holding a different information and send values from a text file dynamicaly. I want to put them in a Associative multi-dimensional array. let's say : $product sends car, truck, train, etc. $price sends 1000, 3000, 1500, etc. $year sends 1997, 1980, 2008, etc. How to create a function which generates an array as follow, when i execute print_r(myarray): Array ( [0] => Array ( [product] => car [price] => 1000 [year] => 1997 ) [1] => Array ( [product] => truck [price] => 3000 [year] => 1980 ) [2] => Array ( [product] => train [price] => 1500 [year] => 2008 )) and so on. Does anyone know how to do this? Many thanks, Mike,

    Read the article

  • Use .bat file to recursively loop through folders and get hold of .class files

    - by user320550
    HI all, This is what i'm trying to do. I have a .bat file which takes in a argument which is nothing but a folder name. What i do first is go one level up (cd ..). Now in this directory i have 3 folders and each folders have sub-folders and have .class files in them. What i want to do is recursively loop through the folders and get hold of the .class files. Once this is done i want to echo the target folder of the .class file as well as echo the name of the.class file. So c:\temp\potter\myclass.class. I would echo out c:\temp\potter\ and myclass. I'm able to do this by writing a separate bat file which works. But when i integrate this with the recursive function it seems to break. This is what i'm doing: :: call the junit classes... and save the results echo step 3... cd %1 cd .. for /r %%a in (*.class) do set Var=%%a echo Full file location %Var% for %%i in ("%Var%") do Set CF=%%~dpi Set CF=%CF:~0,-1% :LOOP If "%CF:~-1,1%"=="\" GoTo :DONE Set CF=%CF:~0,-1% GoTo :LOOP :DONE Set CF=%CF:~0,-1% echo Folder Location %CF% ::cd %CF% For %%j in ("%Var%") Do Set name=%%~nxj :: -6 because of Quotations Set name=%name:~0,-6% echo File Name %name% echo step 3 complete... However i only get the output of one directory, while i have multiple directories having .class files. This is the output i get: step 3... Full file location C:\NKCV\Project\MyActivities\6_Selenium\htmlTestCasesConve rted2JUnit\iexplore\flow2\testCase_app2.class Folder Location C:\NKCV\Project\MyActivities\6_Selenium\htmlTestCasesConverte d2JUnit\iexplore\flow2 File Name testCase_app2 step 3 complete... missing argument! usage htmltestCaseLocation for eg., "C:\NKCV\Project\MyActivities\6_Selenium\htmlTestCases" Could anyone please let me know whats wrong here? Thanks.

    Read the article

< Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >