Search Results

Search found 45502 results on 1821 pages for 'open source contribution'.

Page 572/1821 | < Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >

• How to Assign a Static IP Address in XP, Vista, or Windows 7

  - by Mysticgeek

  When organizing your home network it’s easier to assign each computer it’s own IP address than using DHCP. Here we will take a look at doing it in XP, Vista, and Windows 7. If you have a home network with several computes and devices, it’s a good idea to assign each of them a specific address. If you use DHCP (Dynamic Host Configuration Protocol), each computer will request and be assigned an address every time it’s booted up. When you have to do troubleshooting on your network, it’s annoying going to each machine to figure out what IP they have. Using Static IPs prevents address conflicts between devices and allows you to manage them more easily. Assigning IPs to Windows is essentially the same process, but getting to where you need to be varies between each version. Windows 7 To change the computer’s IP address in Windows 7, type network and sharing into the Search box in the Start Menu and select Network and Sharing Center when it comes up.   Then when the Network and Sharing Center opens, click on Change adapter settings. Right-click on your local adapter and select Properties. In the Local Area Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now select the radio button Use the following IP address and enter in the correct IP, Subnet mask, and Default gateway that corresponds with your network setup. Then enter your Preferred and Alternate DNS server addresses. Here we’re on a home network and using a simple Class C network configuration and Google DNS. Check Validate settings upon exit so Windows can find any problems with the addresses you entered. When you’re finished click OK. Now close out of the Local Area Connections Properties window. Windows 7 will run network diagnostics and verify the connection is good. Here we had no problems with it, but if you did, you could run the network troubleshooting wizard. Now you can open the command prompt and do an ipconfig  to see the network adapter settings have been successfully changed.   Windows Vista Changing your IP from DHCP to a Static address in Vista is similar to Windows 7, but getting to the correct location is a bit different. Open the Start Menu, right-click on Network, and select Properties. The Network and Sharing Center opens…click on Manage network connections. Right-click on the network adapter you want to assign an IP address and click Properties. Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You’ll need to close out of Local Area Connection Properties for the settings to go into effect. Open the Command Prompt and do an ipconfig to verify the changes were successful.   Windows XP In this example we’re using XP SP3 Media Center Edition and changing the IP address of the Wireless adapter. To set a Static IP in XP right-click on My Network Places and select Properties. Right-click on the adapter you want to set the IP for and select Properties. Highlight Internet Protocol (TCP/IP) and click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You will need to close out of the Network Connection Properties screen before the changes go into effect.   Again you can verify the settings by doing an ipconfig in the command prompt. In case you’re not sure how to do this, click on Start then Run.   In the Run box type in cmd and click OK. Then at the prompt type in ipconfig and hit Enter. This will show the IP address for the network adapter you changed.   If you have a small office or home network, assigning each computer a specific IP address makes it a lot easier to manage and troubleshoot network connection problems. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressChange Ubuntu Server from DHCP to a Static IP AddressVista Breadcrumbs for Windows XPCreate a Shortcut or Hotkey for the Safely Remove Hardware DialogCreate a Shortcut or Hotkey to Eject the CD/DVD Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

  Read the article

• Parallelism in .NET – Part 9, Configuration in PLINQ and TPL

  - by Reed

  Parallel LINQ and the Task Parallel Library contain many options for configuration.  Although the default configuration options are often ideal, there are times when customizing the behavior is desirable.  Both frameworks provide full configuration support. When working with Data Parallelism, there is one primary configuration option we often need to control – the number of threads we want the system to use when parallelizing our routine.  By default, PLINQ and the TPL both use the ThreadPool to schedule tasks.  Given the major improvements in the ThreadPool in CLR 4, this default behavior is often ideal.  However, there are times that the default behavior is not appropriate.  For example, if you are working on multiple threads simultaneously, and want to schedule parallel operations from within both threads, you might want to consider restricting each parallel operation to using a subset of the processing cores of the system.  Not doing this might over-parallelize your routine, which leads to inefficiencies from having too many context switches. In the Task Parallel Library, configuration is handled via the ParallelOptions class.  All of the methods of the Parallel class have an overload which accepts a ParallelOptions argument. We configure the Parallel class by setting the ParallelOptions.MaxDegreeOfParallelism property.  For example, let’s revisit one of the simple data parallel examples from Part 2: Parallel.For(0, pixelData.GetUpperBound(0), row => { for (int col=0; col < pixelData.GetUpperBound(1); ++col) { pixelData[row, col] = AdjustContrast(pixelData[row, col], minPixel, maxPixel); } }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, we’re looping through an image, and calling a method on each pixel in the image.  If this was being done on a separate thread, and we knew another thread within our system was going to be doing a similar operation, we likely would want to restrict this to using half of the cores on the system.  This could be accomplished easily by doing: var options = new ParallelOptions(); options.MaxDegreeOfParallelism = Math.Max(Environment.ProcessorCount / 2, 1); Parallel.For(0, pixelData.GetUpperBound(0), options, row => { for (int col=0; col < pixelData.GetUpperBound(1); ++col) { pixelData[row, col] = AdjustContrast(pixelData[row, col], minPixel, maxPixel); } }); Now, we’re restricting this routine to using no more than half the cores in our system.  Note that I included a check to prevent a single core system from supplying zero; without this check, we’d potentially cause an exception.  I also did not hard code a specific value for the MaxDegreeOfParallelism property.  One of our goals when parallelizing a routine is allowing it to scale on better hardware.  Specifying a hard-coded value would contradict that goal. Parallel LINQ also supports configuration, and in fact, has quite a few more options for configuring the system.  The main configuration option we most often need is the same as our TPL option: we need to supply the maximum number of processing threads.  In PLINQ, this is done via a new extension method on ParallelQuery<T>: ParallelEnumerable.WithDegreeOfParallelism. Let’s revisit our declarative data parallelism sample from Part 6: double min = collection.AsParallel().Min(item => item.PerformComputation()); Here, we’re performing a computation on each element in the collection, and saving the minimum value of this operation.  If we wanted to restrict this to a limited number of threads, we would add our new extension method: int maxThreads = Math.Max(Environment.ProcessorCount / 2, 1); double min = collection .AsParallel() .WithDegreeOfParallelism(maxThreads) .Min(item => item.PerformComputation()); This automatically restricts the PLINQ query to half of the threads on the system. PLINQ provides some additional configuration options.  By default, PLINQ will occasionally revert to processing a query in parallel.  This occurs because many queries, if parallelized, typically actually cause an overall slowdown compared to a serial processing equivalent.  By analyzing the “shape” of the query, PLINQ often decides to run a query serially instead of in parallel.  This can occur for (taken from MSDN): Queries that contain a Select, indexed Where, indexed SelectMany, or ElementAt clause after an ordering or filtering operator that has removed or rearranged original indices. Queries that contain a Take, TakeWhile, Skip, SkipWhile operator and where indices in the source sequence are not in the original order. Queries that contain Zip or SequenceEquals, unless one of the data sources has an originally ordered index and the other data source is indexable (i.e. an array or IList(T)). Queries that contain Concat, unless it is applied to indexable data sources. Queries that contain Reverse, unless applied to an indexable data source. If the specific query follows these rules, PLINQ will run the query on a single thread.  However, none of these rules look at the specific work being done in the delegates, only at the “shape” of the query.  There are cases where running in parallel may still be beneficial, even if the shape is one where it typically parallelizes poorly.  In these cases, you can override the default behavior by using the WithExecutionMode extension method.  This would be done like so: var reversed = collection .AsParallel() .WithExecutionMode(ParallelExecutionMode.ForceParallelism) .Select(i => i.PerformComputation()) .Reverse(); Here, the default behavior would be to not parallelize the query unless collection implemented IList<T>.  We can force this to run in parallel by adding the WithExecutionMode extension method in the method chain. Finally, PLINQ has the ability to configure how results are returned.  When a query is filtering or selecting an input collection, the results will need to be streamed back into a single IEnumerable<T> result.  For example, the method above returns a new, reversed collection.  In this case, the processing of the collection will be done in parallel, but the results need to be streamed back to the caller serially, so they can be enumerated on a single thread. This streaming introduces overhead.  IEnumerable<T> isn’t designed with thread safety in mind, so the system needs to handle merging the parallel processes back into a single stream, which introduces synchronization issues.  There are two extremes of how this could be accomplished, but both extremes have disadvantages. The system could watch each thread, and whenever a thread produces a result, take that result and send it back to the caller.  This would mean that the calling thread would have access to the data as soon as data is available, which is the benefit of this approach.  However, it also means that every item is introducing synchronization overhead, since each item needs to be merged individually. On the other extreme, the system could wait until all of the results from all of the threads were ready, then push all of the results back to the calling thread in one shot.  The advantage here is that the least amount of synchronization is added to the system, which means the query will, on a whole, run the fastest.  However, the calling thread will have to wait for all elements to be processed, so this could introduce a long delay between when a parallel query begins and when results are returned. The default behavior in PLINQ is actually between these two extremes.  By default, PLINQ maintains an internal buffer, and chooses an optimal buffer size to maintain.  Query results are accumulated into the buffer, then returned in the IEnumerable<T> result in chunks.  This provides reasonably fast access to the results, as well as good overall throughput, in most scenarios. However, if we know the nature of our algorithm, we may decide we would prefer one of the other extremes.  This can be done by using the WithMergeOptions extension method.  For example, if we know that our PerformComputation() routine is very slow, but also variable in runtime, we may want to retrieve results as they are available, with no bufferring.  This can be done by changing our above routine to: var reversed = collection .AsParallel() .WithExecutionMode(ParallelExecutionMode.ForceParallelism) .WithMergeOptions(ParallelMergeOptions.NotBuffered) .Select(i => i.PerformComputation()) .Reverse(); On the other hand, if are already on a background thread, and we want to allow the system to maximize its speed, we might want to allow the system to fully buffer the results: var reversed = collection .AsParallel() .WithExecutionMode(ParallelExecutionMode.ForceParallelism) .WithMergeOptions(ParallelMergeOptions.FullyBuffered) .Select(i => i.PerformComputation()) .Reverse(); Notice, also, that you can specify multiple configuration options in a parallel query.  By chaining these extension methods together, we generate a query that will always run in parallel, and will always complete before making the results available in our IEnumerable<T>.

  Read the article

• Importing Multiple Schemas to a Model in Oracle SQL Developer Data Modeler

  - by thatjeffsmith

  Your physical data model might stretch across multiple Oracle schemas. Or maybe you just want a single diagram containing tables, views, etc. spanning more than a single user in the database. The process for importing a data dictionary is the same, regardless if you want to suck in objects from one schema, or many schemas. Let’s take a quick look at how to get started with a data dictionary import. I’m using Oracle SQL Developer in this example. The process is nearly identical in Oracle SQL Developer Data Modeler – the only difference being you’ll use the ‘File’ menu to get started versus the ‘File – Data Modeler’ menu in SQL Developer. Remember, the functionality is exactly the same whether you use SQL Developer or SQL Developer Data Modeler when it comes to the data modeling features – you’ll just have a cleaner user interface in SQL Developer Data Modeler. Importing a Data Dictionary to a Model You’ll want to open or create your model first. You can import objects to an existing or new model. The easiest way to get started is to simply open the ‘Browser’ under the View menu. The Browser allows you to navigate your open designs/models You’ll see an ‘Untitled_1′ model by default. I’ve renamed mine to ‘hr_sh_scott_demo.’ Now go back to the File menu, and expand the ‘Data Modeler’ section, and select ‘Import – Data Dictionary.’ This is a fancy way of saying, ‘suck objects out of the database into my model’ Connect! If you haven’t already defined a connection to the database you want to reverse engineer, you’ll need to do that now. I’m going to assume you already have that connection – so select it, and hit the ‘Next’ button. Select the Schema(s) to be imported Select one or more schemas you want to import The schemas selected on this page of the wizard will dictate the lists of tables, views, synonyms, and everything else you can choose from in the next wizard step to import. For brevity, I have selected ALL tables, views, and synonyms from 3 different schemas: HR SCOTT SH Once I hit the ‘Finish’ button in the wizard, SQL Developer will interrogate the database and add the objects to our model. The Big Model and the 3 Little Models I can now see ALL of the objects I just imported in the ‘hr_sh_scott_demo’ relational model in my design tree, and in my relational diagram. Quick Tip: Oracle SQL Developer calls what most folks think of as a ‘Physical Model’ the ‘Relational Model.’ Same difference, mostly. In SQL Developer, a Physical model allows you to define partitioning schemes, advanced storage parameters, and add your PL/SQL code. You can have multiple physical models per relational models. For example I might have a 4 Node RAC in Production that uses partitioning, but in test/dev, only have a single instance with no partitioning. I can have models for both of those physical implementations. The list of tables in my relational model Wouldn’t it be nice if I could segregate the objects based on their schema? Good news, you can! And it’s done by default Several of you might already know where I’m going with this – SUBVIEWS. You can easily create a ‘SubView’ by selecting one or more objects in your model or diagram and add them to a new SubView. SubViews are just mini-models. They contain a subset of objects from the main model. This is very handy when you want to break your model into smaller, more digestible parts. The model information is identical across the model and subviews, so you don’t have to worry about making a change in one place and not having it propagate across your design. SubViews can be used as filters when you create reports and exports as well. So instead of generating a PDF for everything, just show me what’s in my ‘ABC’ subview. But, I don’t want to do any work! Remember, I’m really lazy. More good news – it’s already done by default! The schemas are automatically used to create default SubViews Auto-Navigate to the Object in the Diagram In the subview tree node, right-click on the object you want to navigate to. You can ask to be taken to the main model view or to the SubView location. If you haven’t already opened the SubView in the diagram, it will be automatically opened for you. The SubView diagram only contains the objects from that SubView Your SubView might still be pretty big, many dozens of objects, so don’t forget about the ‘Navigator‘ either! In summary, use the ‘Import’ feature to add existing database objects to your model. If you import from multiple schemas, take advantage of the default schema based SubViews to help you manage your models! Sometimes less is more!

  Read the article

• How to fix "ruby installation is missing psych (for YAML output)." on CentOS?

  - by ohho

  After rvm installation on CentOS 5.8: [rails@localhost ~]$ rvm -v rvm 1.16.17 [rails@localhost ~]$ which ruby ~/.rvm/rubies/ruby-1.9.3-p286/bin/ruby [rails@localhost ~]$ ruby -v ruby 1.9.3p286 (2012-10-12 revision 37165) [i686-linux] [rails@localhost ~]$ which gem ~/.rvm/rubies/ruby-1.9.3-p286/bin/gem there is a warning: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 I followed some advice: $ rvm pkg install libyaml Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/usr Please note that it's required to reinstall all rubies: rvm reinstall all --force and then: $ rvm reinstall all --force Removing /home/rails/.rvm/src/ruby-1.8.7-p371... Removing /home/rails/.rvm/rubies/ruby-1.8.7-p371... No binary rubies available for: centos/5.8/i386/ruby-1.8.7-p371. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.8.7-p371, this may take a while depending on your cpu(s)... ruby-1.8.7-p371 - #downloading ruby-1.8.7-p371, this may take a while depending on your connection... ruby-1.8.7-p371 - #extracting ruby-1.8.7-p371 to /home/rails/.rvm/src/ruby-1.8.7-p371 ruby-1.8.7-p371 - #extracted to /home/rails/.rvm/src/ruby-1.8.7-p371 Applying patch /home/rails/.rvm/patches/ruby/1.8.7/stdout-rouge-fix.patch Applying patch /home/rails/.rvm/patches/ruby/1.8.7/no_sslv2.diff ruby-1.8.7-p371 - #configuring ruby-1.8.7-p371 - #compiling ruby-1.8.7-p371 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.8.7-p371 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.8.7-p371 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.8.7-p371 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.8.7-p371 - #complete Please be aware that you just installed a ruby that requires 2 patches just to be compiled on up to date linux system. This may have known and unaccounted for security vulnerabilities. Please consider upgrading to Ruby 1.9.3-286 which will have all of the latest security patches. Making gemset ruby-1.8.7-p371 pristine. Making gemset ruby-1.8.7-p371@global pristine. Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... No binary rubies available for: centos/5.8/i386/ruby-1.9.3-p286. Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies. Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #configuring ruby-1.9.3-p286 - #compiling ruby-1.9.3-p286 - #installing Removing old Rubygems files... Installing rubygems-1.8.24 for ruby-1.9.3-p286 ... Installation of rubygems completed successfully. Saving wrappers to '/home/rails/.rvm/bin'. ruby-1.9.3-p286 - #adjusting #shebangs for (gem irb erb ri rdoc testrb rake). ruby-1.9.3-p286 - #importing default gemsets (/home/rails/.rvm/gemsets/) Install of ruby-1.9.3-p286 - #complete Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine. Too bad, the warning is still there: $ gem -v /home/rails/.rvm/rubies/ruby-1.9.3-p286/lib/ruby/1.9.1/yaml.rb:56:in `<top (required)>': It seems your ruby installation is missing psych (for YAML output). To eliminate this warning, please install libyaml and reinstall your ruby. 1.8.24 How can I get rid of the warning? UPDATE: (applying rvm reinstall 1.9.3 --movable) $ rvm reinstall 1.9.3 --movable Removing /home/rails/.rvm/src/ruby-1.9.3-p286... Removing /home/rails/.rvm/rubies/ruby-1.9.3-p286... Fetching yaml-0.1.4.tar.gz to /home/rails/.rvm/archives Extracting yaml-0.1.4.tar.gz to /home/rails/.rvm/src Prepare yaml in /home/rails/.rvm/src/yaml-0.1.4. Configuring yaml in /home/rails/.rvm/src/yaml-0.1.4. Compiling yaml in /home/rails/.rvm/src/yaml-0.1.4. Installing yaml to /home/rails/.rvm/rubies/ruby-1.9.3-p286 Installing Ruby from source to: /home/rails/.rvm/rubies/ruby-1.9.3-p286, this may take a while depending on your cpu(s)... ruby-1.9.3-p286 - #downloading ruby-1.9.3-p286, this may take a while depending on your connection... ruby-1.9.3-p286 - #extracting ruby-1.9.3-p286 to /home/rails/.rvm/src/ruby-1.9.3-p286 ruby-1.9.3-p286 - #extracted to /home/rails/.rvm/src/ruby-1.9.3-p286 Applying patch /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch Error running 'patch -F 25 -p1 -N -f -i /home/rails/.rvm/patches/ruby/1.9.3/ruby-multilib.patch', please read /home/rails/.rvm/log/ruby-1.9.3-p286/patch.apply.ruby-multilib.log There has been an error applying the specified patches. Halting the installation. Making gemset ruby-1.9.3-p286 pristine. Making gemset ruby-1.9.3-p286@global pristine.

  Read the article

• Custom ASP.NET Routing to an HttpHandler

  - by Rick Strahl

  As of version 4.0 ASP.NET natively supports routing via the now built-in System.Web.Routing namespace. Routing features are automatically integrated into the HtttpRuntime via a few custom interfaces. New Web Forms Routing Support In ASP.NET 4.0 there are a host of improvements including routing support baked into Web Forms via a RouteData property available on the Page class and RouteCollection.MapPageRoute() route handler that makes it easy to route to Web forms. To map ASP.NET Page routes is as simple as setting up the routes with MapPageRoute:protected void Application_Start(object sender, EventArgs e) { RegisterRoutes(RouteTable.Routes); } void RegisterRoutes(RouteCollection routes) { routes.MapPageRoute("StockQuote", "StockQuote/{symbol}", "StockQuote.aspx"); routes.MapPageRoute("StockQuotes", "StockQuotes/{symbolList}", "StockQuotes.aspx"); } and then accessing the route data in the page you can then use the new Page class RouteData property to retrieve the dynamic route data information:public partial class StockQuote1 : System.Web.UI.Page { protected StockQuote Quote = null; protected void Page_Load(object sender, EventArgs e) { string symbol = RouteData.Values["symbol"] as string; StockServer server = new StockServer(); Quote = server.GetStockQuote(symbol); // display stock data in Page View } } Simple, quick and doesn’t require much explanation. If you’re using WebForms most of your routing needs should be served just fine by this simple mechanism. Kudos to the ASP.NET team for putting this in the box and making it easy! How Routing Works To handle Routing in ASP.NET involves these steps: Registering Routes Creating a custom RouteHandler to retrieve an HttpHandler Attaching RouteData to your HttpHandler Picking up Route Information in your Request code Registering routes makes ASP.NET aware of the Routes you want to handle via the static RouteTable.Routes collection. You basically add routes to this collection to let ASP.NET know which URL patterns it should watch for. You typically hook up routes off a RegisterRoutes method that fires in Application_Start as I did in the example above to ensure routes are added only once when the application first starts up. When you create a route, you pass in a RouteHandler instance which ASP.NET caches and reuses as routes are matched. Once registered ASP.NET monitors the routes and if a match is found just prior to the HttpHandler instantiation, ASP.NET uses the RouteHandler registered for the route and calls GetHandler() on it to retrieve an HttpHandler instance. The RouteHandler.GetHandler() method is responsible for creating an instance of an HttpHandler that is to handle the request and – if necessary – to assign any additional custom data to the handler. At minimum you probably want to pass the RouteData to the handler so the handler can identify the request based on the route data available. To do this you typically add  a RouteData property to your handler and then assign the property from the RouteHandlers request context. This is essentially how Page.RouteData comes into being and this approach should work well for any custom handler implementation that requires RouteData. It’s a shame that ASP.NET doesn’t have a top level intrinsic object that’s accessible off the HttpContext object to provide route data more generically, but since RouteData is directly tied to HttpHandlers and not all handlers support it it might cause some confusion of when it’s actually available. Bottom line is that if you want to hold on to RouteData you have to assign it to a custom property of the handler or else pass it to the handler via Context.Items[] object that can be retrieved on an as needed basis. It’s important to understand that routing is hooked up via RouteHandlers that are responsible for loading HttpHandler instances. RouteHandlers are invoked for every request that matches a route and through this RouteHandler instance the Handler gains access to the current RouteData. Because of this logic it’s important to understand that Routing is really tied to HttpHandlers and not available prior to handler instantiation, which is pretty late in the HttpRuntime’s request pipeline. IOW, Routing works with Handlers but not with earlier in the pipeline within Modules. Specifically ASP.NET calls RouteHandler.GetHandler() from the PostResolveRequestCache HttpRuntime pipeline event. Here’s the call stack at the beginning of the GetHandler() call: which fires just before handler resolution. Non-Page Routing – You need to build custom RouteHandlers If you need to route to a custom Http Handler or other non-Page (and non-MVC) endpoint in the HttpRuntime, there is no generic mapping support available. You need to create a custom RouteHandler that can manage creating an instance of an HttpHandler that is fired in response to a routed request. Depending on what you are doing this process can be simple or fairly involved as your code is responsible based on the route data provided which handler to instantiate, and more importantly how to pass the route data on to the Handler. Luckily creating a RouteHandler is easy by implementing the IRouteHandler interface which has only a single GetHttpHandler(RequestContext context) method. In this method you can pick up the requestContext.RouteData, instantiate the HttpHandler of choice, and assign the RouteData to it. Then pass back the handler and you’re done.Here’s a simple example of GetHttpHandler() method that dynamically creates a handler based on a passed in Handler type./// <summary> /// Retrieves an Http Handler based on the type specified in the constructor /// </summary> /// <param name="requestContext"></param> /// <returns></returns> IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; // If we're dealing with a Callback Handler // pass the RouteData for this route to the Handler if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; } Note that this code checks for a specific type of handler and if it matches assigns the RouteData to this handler. This is optional but quite a common scenario if you want to work with RouteData. If the handler you need to instantiate isn’t under your control but you still need to pass RouteData to Handler code, an alternative is to pass the RouteData via the HttpContext.Items collection:IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; requestContext.HttpContext.Items["RouteData"] = requestContext.RouteData; return handler; } The code in the handler implementation can then pick up the RouteData from the context collection as needed:RouteData routeData = HttpContext.Current.Items["RouteData"] as RouteData This isn’t as clean as having an explicit RouteData property, but it does have the advantage that the route data is visible anywhere in the Handler’s code chain. It’s definitely preferable to create a custom property on your handler, but the Context work-around works in a pinch when you don’t’ own the handler code and have dynamic code executing as part of the handler execution. An Example of a Custom RouteHandler: Attribute Based Route Implementation In this post I’m going to discuss a custom routine implementation I built for my CallbackHandler class in the West Wind Web & Ajax Toolkit. CallbackHandler can be very easily used for creating AJAX, REST and POX requests following RPC style method mapping. You can pass parameters via URL query string, POST data or raw data structures, and you can retrieve results as JSON, XML or raw string/binary data. It’s a quick and easy way to build service interfaces with no fuss. As a quick review here’s how CallbackHandler works: You create an Http Handler that derives from CallbackHandler You implement methods that have a [CallbackMethod] Attribute and that’s it. Here’s an example of an CallbackHandler implementation in an ashx.cs based handler:// RestService.ashx.cs public class RestService : CallbackHandler { [CallbackMethod] public StockQuote GetStockQuote(string symbol) { StockServer server = new StockServer(); return server.GetStockQuote(symbol); } [CallbackMethod] public StockQuote[] GetStockQuotes(string symbolList) { StockServer server = new StockServer(); string[] symbols = symbolList.Split(new char[2] { ',',';' },StringSplitOptions.RemoveEmptyEntries); return server.GetStockQuotes(symbols); } } CallbackHandler makes it super easy to create a method on the server, pass data to it via POST, QueryString or raw JSON/XML data, and then retrieve the results easily back in various formats. This works wonderful and I’ve used these tools in many projects for myself and with clients. But one thing missing has been the ability to create clean URLs. Typical URLs looked like this: http://www.west-wind.com/WestwindWebToolkit/samples/Rest/StockService.ashx?Method=GetStockQuote&symbol=msfthttp://www.west-wind.com/WestwindWebToolkit/samples/Rest/StockService.ashx?Method=GetStockQuotes&symbolList=msft,intc,gld,slw,mwe&format=xml which works and is clear enough, but also clearly very ugly. It would be much nicer if URLs could look like this: http://www.west-wind.com//WestwindWebtoolkit/Samples/StockQuote/msfthttp://www.west-wind.com/WestwindWebtoolkit/Samples/StockQuotes/msft,intc,gld,slw?format=xml (the Virtual Root in this sample is WestWindWebToolkit/Samples and StockQuote/{symbol} is the route)(If you use FireFox try using the JSONView plug-in make it easier to view JSON content) So, taking a clue from the WCF REST tools that use RouteUrls I set out to create a way to specify RouteUrls for each of the endpoints. The change made basically allows changing the above to: [CallbackMethod(RouteUrl="RestService/StockQuote/{symbol}")] public StockQuote GetStockQuote(string symbol) { StockServer server = new StockServer(); return server.GetStockQuote(symbol); } [CallbackMethod(RouteUrl = "RestService/StockQuotes/{symbolList}")] public StockQuote[] GetStockQuotes(string symbolList) { StockServer server = new StockServer(); string[] symbols = symbolList.Split(new char[2] { ',',';' },StringSplitOptions.RemoveEmptyEntries); return server.GetStockQuotes(symbols); } where a RouteUrl is specified as part of the Callback attribute. And with the changes made with RouteUrls I can now get URLs like the second set shown earlier. So how does that work? Let’s find out… How to Create Custom Routes As mentioned earlier Routing is made up of several steps: Creating a custom RouteHandler to create HttpHandler instances Mapping the actual Routes to the RouteHandler Retrieving the RouteData and actually doing something useful with it in the HttpHandler In the CallbackHandler routing example above this works out to something like this: Create a custom RouteHandler that includes a property to track the method to call Set up the routes using Reflection against the class Looking for any RouteUrls in the CallbackMethod attribute Add a RouteData property to the CallbackHandler so we can access the RouteData in the code of the handler Creating a Custom Route Handler To make the above work I created a custom RouteHandler class that includes the actual IRouteHandler implementation as well as a generic and static method to automatically register all routes marked with the [CallbackMethod(RouteUrl="…")] attribute. Here’s the code:/// <summary> /// Route handler that can create instances of CallbackHandler derived /// callback classes. The route handler tracks the method name and /// creates an instance of the service in a predictable manner /// </summary> /// <typeparam name="TCallbackHandler">CallbackHandler type</typeparam> public class CallbackHandlerRouteHandler : IRouteHandler { /// <summary> /// Method name that is to be called on this route. /// Set by the automatically generated RegisterRoutes /// invokation. /// </summary> public string MethodName { get; set; } /// <summary> /// The type of the handler we're going to instantiate. /// Needed so we can semi-generically instantiate the /// handler and call the method on it. /// </summary> public Type CallbackHandlerType { get; set; } /// <summary> /// Constructor to pass in the two required components we /// need to create an instance of our handler. /// </summary> /// <param name="methodName"></param> /// <param name="callbackHandlerType"></param> public CallbackHandlerRouteHandler(string methodName, Type callbackHandlerType) { MethodName = methodName; CallbackHandlerType = callbackHandlerType; } /// <summary> /// Retrieves an Http Handler based on the type specified in the constructor /// </summary> /// <param name="requestContext"></param> /// <returns></returns> IHttpHandler IRouteHandler.GetHttpHandler(RequestContext requestContext) { IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; // If we're dealing with a Callback Handler // pass the RouteData for this route to the Handler if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; } /// <summary> /// Generic method to register all routes from a CallbackHandler /// that have RouteUrls defined on the [CallbackMethod] attribute /// </summary> /// <typeparam name="TCallbackHandler">CallbackHandler Type</typeparam> /// <param name="routes"></param> public static void RegisterRoutes<TCallbackHandler>(RouteCollection routes) { // find all methods var methods = typeof(TCallbackHandler).GetMethods(BindingFlags.Instance | BindingFlags.Public); foreach (var method in methods) { var attrs = method.GetCustomAttributes(typeof(CallbackMethodAttribute), false); if (attrs.Length < 1) continue; CallbackMethodAttribute attr = attrs[0] as CallbackMethodAttribute; if (string.IsNullOrEmpty(attr.RouteUrl)) continue; // Add the route routes.Add(method.Name, new Route(attr.RouteUrl, new CallbackHandlerRouteHandler(method.Name, typeof(TCallbackHandler)))); } } } The RouteHandler implements IRouteHandler, and its responsibility via the GetHandler method is to create an HttpHandler based on the route data. When ASP.NET calls GetHandler it passes a requestContext parameter which includes a requestContext.RouteData property. This parameter holds the current request’s route data as well as an instance of the current RouteHandler. If you look at GetHttpHandler() you can see that the code creates an instance of the handler we are interested in and then sets the RouteData property on the handler. This is how you can pass the current request’s RouteData to the handler. The RouteData object also has a  RouteData.RouteHandler property that is also available to the Handler later, which is useful in order to get additional information about the current route. In our case here the RouteHandler includes a MethodName property that identifies the method to execute in the handler since that value no longer comes from the URL so we need to figure out the method name some other way. The method name is mapped explicitly when the RouteHandler is created and here the static method that auto-registers all CallbackMethods with RouteUrls sets the method name when it creates the routes while reflecting over the methods (more on this in a minute). The important point here is that you can attach additional properties to the RouteHandler and you can then later access the RouteHandler and its properties later in the Handler to pick up these custom values. This is a crucial feature in that the RouteHandler serves in passing additional context to the handler so it knows what actions to perform. The automatic route registration is handled by the static RegisterRoutes<TCallbackHandler> method. This method is generic and totally reusable for any CallbackHandler type handler. To register a CallbackHandler and any RouteUrls it has defined you simple use code like this in Application_Start (or other application startup code):protected void Application_Start(object sender, EventArgs e) { // Register Routes for RestService CallbackHandlerRouteHandler.RegisterRoutes<RestService>(RouteTable.Routes); } If you have multiple CallbackHandler style services you can make multiple calls to RegisterRoutes for each of the service types. RegisterRoutes internally uses reflection to run through all the methods of the Handler, looking for CallbackMethod attributes and whether a RouteUrl is specified. If it is a new instance of a CallbackHandlerRouteHandler is created and the name of the method and the type are set. routes.Add(method.Name,           new Route(attr.RouteUrl, new CallbackHandlerRouteHandler(method.Name, typeof(TCallbackHandler) )) ); While the routing with CallbackHandlerRouteHandler is set up automatically for all methods that use the RouteUrl attribute, you can also use code to hook up those routes manually and skip using the attribute. The code for this is straightforward and just requires that you manually map each individual route to each method you want a routed: protected void Application_Start(objectsender, EventArgs e){    RegisterRoutes(RouteTable.Routes);}void RegisterRoutes(RouteCollection routes) { routes.Add("StockQuote Route",new Route("StockQuote/{symbol}",                     new CallbackHandlerRouteHandler("GetStockQuote",typeof(RestService) ) ) );     routes.Add("StockQuotes Route",new Route("StockQuotes/{symbolList}",                     new CallbackHandlerRouteHandler("GetStockQuotes",typeof(RestService) ) ) );}I think it’s clearly easier to have CallbackHandlerRouteHandler.RegisterRoutes() do this automatically for you based on RouteUrl attributes, but some people have a real aversion to attaching logic via attributes. Just realize that the option to manually create your routes is available as well. Using the RouteData in the Handler A RouteHandler’s responsibility is to create an HttpHandler and as mentioned earlier, natively IHttpHandler doesn’t have any support for RouteData. In order to utilize RouteData in your handler code you have to pass the RouteData to the handler. In my CallbackHandlerRouteHandler when it creates the HttpHandler instance it creates the instance and then assigns the custom RouteData property on the handler:IHttpHandler handler = Activator.CreateInstance(CallbackHandlerType) as IHttpHandler; if (handler is CallbackHandler) ((CallbackHandler)handler).RouteData = requestContext.RouteData; return handler; Again this only works if you actually add a RouteData property to your handler explicitly as I did in my CallbackHandler implementation:/// <summary> /// Optionally store RouteData on this handler /// so we can access it internally /// </summary> public RouteData RouteData {get; set; } and the RouteHandler needs to set it when it creates the handler instance. Once you have the route data in your handler you can access Route Keys and Values and also the RouteHandler. Since my RouteHandler has a custom property for the MethodName to retrieve it from within the handler I can do something like this now to retrieve the MethodName (this example is actually not in the handler but target is an instance pass to the processor): // check for Route Data method name if (target is CallbackHandler) { var routeData = ((CallbackHandler)target).RouteData; if (routeData != null) methodToCall = ((CallbackHandlerRouteHandler)routeData.RouteHandler).MethodName; } When I need to access the dynamic values in the route ( symbol in StockQuote/{symbol}) I can retrieve it easily with the Values collection (RouteData.Values["symbol"]). In my CallbackHandler processing logic I’m basically looking for matching parameter names to Route parameters: // look for parameters in the routeif(routeData != null){    string parmString = routeData.Values[parameter.Name] as string;    adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType);} And with that we’ve come full circle. We’ve created a custom RouteHandler() that passes the RouteData to the handler it creates. We’ve registered our routes to use the RouteHandler, and we’ve utilized the route data in our handler. For completeness sake here’s the routine that executes a method call based on the parameters passed in and one of the options is to retrieve the inbound parameters off RouteData (as well as from POST data or QueryString parameters):internal object ExecuteMethod(string method, object target, string[] parameters, CallbackMethodParameterType paramType, ref CallbackMethodAttribute callbackMethodAttribute) { HttpRequest Request = HttpContext.Current.Request; object Result = null; // Stores parsed parameters (from string JSON or QUeryString Values) object[] adjustedParms = null; Type PageType = target.GetType(); MethodInfo MI = PageType.GetMethod(method, BindingFlags.Instance | BindingFlags.Public | BindingFlags.NonPublic); if (MI == null) throw new InvalidOperationException("Invalid Server Method."); object[] methods = MI.GetCustomAttributes(typeof(CallbackMethodAttribute), false); if (methods.Length < 1) throw new InvalidOperationException("Server method is not accessible due to missing CallbackMethod attribute"); if (callbackMethodAttribute != null) callbackMethodAttribute = methods[0] as CallbackMethodAttribute; ParameterInfo[] parms = MI.GetParameters(); JSONSerializer serializer = new JSONSerializer(); RouteData routeData = null; if (target is CallbackHandler) routeData = ((CallbackHandler)target).RouteData; int parmCounter = 0; adjustedParms = new object[parms.Length]; foreach (ParameterInfo parameter in parms) { // Retrieve parameters out of QueryString or POST buffer if (parameters == null) { // look for parameters in the route if (routeData != null) { string parmString = routeData.Values[parameter.Name] as string; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType); } // GET parameter are parsed as plain string values - no JSON encoding else if (HttpContext.Current.Request.HttpMethod == "GET") { // Look up the parameter by name string parmString = Request.QueryString[parameter.Name]; adjustedParms[parmCounter] = ReflectionUtils.StringToTypedValue(parmString, parameter.ParameterType); } // POST parameters are treated as methodParameters that are JSON encoded else if (paramType == CallbackMethodParameterType.Json) //string newVariable = methodParameters.GetValue(parmCounter) as string; adjustedParms[parmCounter] = serializer.Deserialize(Request.Params["parm" + (parmCounter + 1).ToString()], parameter.ParameterType); else adjustedParms[parmCounter] = SerializationUtils.DeSerializeObject( Request.Params["parm" + (parmCounter + 1).ToString()], parameter.ParameterType); } else if (paramType == CallbackMethodParameterType.Json) adjustedParms[parmCounter] = serializer.Deserialize(parameters[parmCounter], parameter.ParameterType); else adjustedParms[parmCounter] = SerializationUtils.DeSerializeObject(parameters[parmCounter], parameter.ParameterType); parmCounter++; } Result = MI.Invoke(target, adjustedParms); return Result; } The code basically uses Reflection to loop through all the parameters available on the method and tries to assign the parameters from RouteData, QueryString or POST variables. The parameters are converted into their appropriate types and then used to eventually make a Reflection based method call. What’s sweet is that the RouteData retrieval is just another option for dealing with the inbound data in this scenario and it adds exactly two lines of code plus the code to retrieve the MethodName I showed previously – a seriously low impact addition that adds a lot of extra value to this endpoint callback processing implementation. Debugging your Routes If you create a lot of routes it’s easy to run into Route conflicts where multiple routes have the same path and overlap with each other. This can be difficult to debug especially if you are using automatically generated routes like the routes created by CallbackHandlerRouteHandler.RegisterRoutes. Luckily there’s a tool that can help you out with this nicely. Phill Haack created a RouteDebugging tool you can download and add to your project. The easiest way to do this is to grab and add this to your project is to use NuGet (Add Library Package from your Project’s Reference Nodes):   which adds a RouteDebug assembly to your project. Once installed you can easily debug your routes with this simple line of code which needs to be installed at application startup:protected void Application_Start(object sender, EventArgs e) { CallbackHandlerRouteHandler.RegisterRoutes<StockService>(RouteTable.Routes); // Debug your routes RouteDebug.RouteDebugger.RewriteRoutesForTesting(RouteTable.Routes); } Any routed URL then displays something like this: The screen shows you your current route data and all the routes that are mapped along with a flag that displays which route was actually matched. This is useful – if you have any overlap of routes you will be able to see which routes are triggered – the first one in the sequence wins. This tool has saved my ass on a few occasions – and with NuGet now it’s easy to add it to your project in a few seconds and then remove it when you’re done. Routing Around Custom routing seems slightly complicated on first blush due to its disconnected components of RouteHandler, route registration and mapping of custom handlers. But once you understand the relationship between a RouteHandler, the RouteData and how to pass it to a handler, utilizing of Routing becomes a lot easier as you can easily pass context from the registration to the RouteHandler and through to the HttpHandler. The most important thing to understand when building custom routing solutions is to figure out how to map URLs in such a way that the handler can figure out all the pieces it needs to process the request. This can be via URL routing parameters and as I did in my example by passing additional context information as part of the RouteHandler instance that provides the proper execution context. In my case this ‘context’ was the method name, but it could be an actual static value like an enum identifying an operation or category in an application. Basically user supplied data comes in through the url and static application internal data can be passed via RouteHandler property values. Routing can make your application URLs easier to read by non-techie types regardless of whether you’re building Service type or REST applications, or full on Web interfaces. Routing in ASP.NET 4.0 makes it possible to create just about any extensionless URLs you can dream up and custom RouteHanmdler References Sample ProjectIncludes the sample CallbackHandler service discussed here along with compiled versionsof the Westwind.Web and Westwind.Utilities assemblies.  (requires .NET 4.0/VS 2010) West Wind Web Toolkit includes full implementation of CallbackHandler and the Routing Handler West Wind Web Toolkit Source CodeContains the full source code to the Westwind.Web and Westwind.Utilities assemblies usedin these samples. Includes the source described in the post.(Latest build in the Subversion Repository) CallbackHandler Source(Relevant code to this article tree in Westwind.Web assembly) JSONView FireFoxPluginA simple FireFox Plugin to easily view JSON data natively in FireFox.For IE you can use a registry hack to display JSON as raw text.© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  AJAX  HTTP  

  Read the article

• SignalR Auto Disconnect when Page Changed in AngularJS

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/05/30/signalr-auto-disconnect-when-page-changed-in-angularjs.aspxIf we are using SignalR, the connection lifecycle was handled by itself very well. For example when we connect to SignalR service from browser through SignalR JavaScript Client the connection will be established. And if we refresh the page, close the tab or browser, or navigate to another URL then the connection will be closed automatically. This information had been well documented here. In a browser, SignalR client code that maintains a SignalR connection runs in the JavaScript context of a web page. That's why the SignalR connection has to end when you navigate from one page to another, and that's why you have multiple connections with multiple connection IDs if you connect from multiple browser windows or tabs. When the user closes a browser window or tab, or navigates to a new page or refreshes the page, the SignalR connection immediately ends because SignalR client code handles that browser event for you and calls the "Stop" method. But unfortunately this behavior doesn't work if we are using SignalR with AngularJS. AngularJS is a single page application (SPA) framework created by Google. It hijacks browser's address change event, based on the route table user defined, launch proper view and controller. Hence in AngularJS we address was changed but the web page still there. All changes of the page content are triggered by Ajax. So there's no page unload and load events. This is the reason why SignalR cannot handle disconnect correctly when works with AngularJS. If we dig into the source code of SignalR JavaScript Client source code we will find something below. It monitors the browser page "unload" and "beforeunload" event and send the "stop" message to server to terminate connection. But in AngularJS page change events were hijacked, so SignalR will not receive them and will not stop the connection. 1: // wire the stop handler for when the user leaves the page 2: _pageWindow.bind("unload", function () { 3: connection.log("Window unloading, stopping the connection."); 4:  5: connection.stop(asyncAbort); 6: }); 7:  8: if (isFirefox11OrGreater) { 9: // Firefox does not fire cross-domain XHRs in the normal unload handler on tab close. 10: // #2400 11: _pageWindow.bind("beforeunload", function () { 12: // If connection.stop() runs runs in beforeunload and fails, it will also fail 13: // in unload unless connection.stop() runs after a timeout. 14: window.setTimeout(function () { 15: connection.stop(asyncAbort); 16: }, 0); 17: }); 18: }   Problem Reproduce In the codes below I created a very simple example to demonstrate this issue. Here is the SignalR server side code. 1: public class GreetingHub : Hub 2: { 3: public override Task OnConnected() 4: { 5: Debug.WriteLine(string.Format("Connected: {0}", Context.ConnectionId)); 6: return base.OnConnected(); 7: } 8:  9: public override Task OnDisconnected() 10: { 11: Debug.WriteLine(string.Format("Disconnected: {0}", Context.ConnectionId)); 12: return base.OnDisconnected(); 13: } 14:  15: public void Hello(string user) 16: { 17: Clients.All.hello(string.Format("Hello, {0}!", user)); 18: } 19: } Below is the configuration code which hosts SignalR hub in an ASP.NET WebAPI project with IIS Express. 1: public class Startup 2: { 3: public void Configuration(IAppBuilder app) 4: { 5: app.Map("/signalr", map => 6: { 7: map.UseCors(CorsOptions.AllowAll); 8: map.RunSignalR(new HubConfiguration() 9: { 10: EnableJavaScriptProxies = false 11: }); 12: }); 13: } 14: } Since we will host AngularJS application in Node.js in another process and port, the SignalR connection will be cross domain. So I need to enable CORS above. In client side I have a Node.js file to host AngularJS application as a web server. You can use any web server you like such as IIS, Apache, etc.. Below is the "index.html" page which contains a navigation bar so that I can change the page/state. As you can see I added jQuery, AngularJS, SignalR JavaScript Client Library as well as my AngularJS entry source file "app.js". 1: <html data-ng-app="demo"> 2: <head> 3: <script type="text/javascript" src="jquery-2.1.0.js"></script> 1:  2: <script type="text/javascript" src="angular.js"> 1: </script> 2: <script type="text/javascript" src="angular-ui-router.js"> 1: </script> 2: <script type="text/javascript" src="jquery.signalR-2.0.3.js"> 1: </script> 2: <script type="text/javascript" src="app.js"></script> 4: </head> 5: <body> 6: <h1>SignalR Auto Disconnect with AngularJS by Shaun</h1> 7: <div> 8: <a href="javascript:void(0)" data-ui-sref="view1">View 1</a> | 9: <a href="javascript:void(0)" data-ui-sref="view2">View 2</a> 10: </div> 11: <div data-ui-view></div> 12: </body> 13: </html> Below is the "app.js". My SignalR logic was in the "View1" page and it will connect to server once the controller was executed. User can specify a user name and send to server, all clients that located in this page will receive the server side greeting message through SignalR. 1: 'use strict'; 2:  3: var app = angular.module('demo', ['ui.router']); 4:  5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10:  11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15:  16: $locationProvider.html5Mode(true); 17: }]); 18:  19: app.value('$', $); 20: app.value('endpoint', 'http://localhost:60448'); 21: app.value('hub', 'GreetingHub'); 22:  23: app.controller('View1Ctrl', function ($scope, $, endpoint, hub) { 24: $scope.user = ''; 25: $scope.response = ''; 26:  27: $scope.greeting = function () { 28: proxy.invoke('Hello', $scope.user) 29: .done(function () {}) 30: .fail(function (error) { 31: console.log(error); 32: }); 33: }; 34:  35: var connection = $.hubConnection(endpoint); 36: var proxy = connection.createHubProxy(hub); 37: proxy.on('hello', function (response) { 38: $scope.$apply(function () { 39: $scope.response = response; 40: }); 41: }); 42: connection.start() 43: .done(function () { 44: console.log('signlar connection established'); 45: }) 46: .fail(function (error) { 47: console.log(error); 48: }); 49: }); 50:  51: app.controller('View2Ctrl', function ($scope, $) { 52: }); When we went to View1 the server side "OnConnect" method will be invoked as below. And in any page we send the message to server, all clients will got the response. If we close one of the client, the server side "OnDisconnect" method will be invoked which is correct. But is we click "View 2" link in the page "OnDisconnect" method will not be invoked even though the content and browser address had been changed. This might cause many SignalR connections remain between the client and server. Below is what happened after I clicked "View 1" and "View 2" links four times. As you can see there are 4 live connections.   Solution Since the reason of this issue is because, AngularJS hijacks the page event that SignalR need to stop the connection, we can handle AngularJS route or state change event and stop SignalR connect manually. In the code below I moved the "connection" variant to global scope, added a handler to "$stateChangeStart" and invoked "stop" method of "connection" if its state was not "disconnected". 1: var connection; 2: app.run(['$rootScope', function ($rootScope) { 3: $rootScope.$on('$stateChangeStart', function () { 4: if (connection && connection.state && connection.state !== 4 /* disconnected */) { 5: console.log('signlar connection abort'); 6: connection.stop(); 7: } 8: }); 9: }]); Now if we refresh the page and navigated to View 1, the connection will be opened. At this state if we clicked "View 2" link the content will be changed and the SignalR connection will be closed automatically.   Summary In this post I demonstrated an issue when we are using SignalR with AngularJS. The connection cannot be closed automatically when we navigate to other page/state in AngularJS. And the solution I mentioned below is to move the SignalR connection as a global variant and close it manually when AngularJS route/state changed. You can download the full sample code here. Moving the SignalR connection as a global variant might not be a best solution. It's just for easy to demo here. In production code I suggest wrapping all SignalR operations into an AngularJS factory. Since AngularJS factory is a singleton object, we can safely put the connection variant in the factory function scope.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• How to Play FLAC Files in Windows 7 Media Center & Player

  - by Mysticgeek

  An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen.   Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library.   Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information.   After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library.   Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12.   Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info.   Then confirming the album information is correct…   Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8  M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

  Read the article

• Hot to fix nautilus desktop on linux mint

  - by user59530

  so I'm using Linux Mint 13 with Cinnamon and suddenly there are no icons on the desktop and the right click doesn't work, it's like the desktop doesn't start up at all, but the Cinnamon interface and everything else are working just fine. This happens only when I open the session with Cinnamon, if I start the session on the classic Gnome or MATE the desktop works. I tried to re-install Cinnamon but nothing changed. Then, I noticed that there are some little problems in Nautilus (sometimes menus aren't the color they're supposed to be), so I'm convinced that Nautilus might be the problem, but I don't know how to fix this, I've tried a few thing but I'm starting to fear that I'm only making it worse. Also, when I open the terminal and type in nautilus here's what's shows up, any help? (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:85:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:192:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:228:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:275:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:310:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:389:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:737:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1095:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1137:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1755:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1856:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1873:18: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1889:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1947:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1954:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1967:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2025:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2075:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2090:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2195:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: gnome-panel.css:92:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:15:15: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:15:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:79:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:84:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:113:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nautilus.css:118:18: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:15:15: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:15:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:79:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:84:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:113:17: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING **: Theme parsing error: nemo.css:118:18: Not using units is deprecated. Assuming 'px'. (nautilus:2906): Gtk-WARNING *: Theme parsing error: unity.css:21:18: Not using units is deprecated. Assuming 'px'. Initializing nautilus-dropbox 1.4.0 Initializing nautilus-open-terminal extension * Message: Initializing gksu extension...

  Read the article

• Diagnose PC Hardware Problems with an Ubuntu Live CD

  - by Trevor Bekolay

  So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

  Read the article

• Create an iTunes Account without a credit card

  - by Matthew Guay

  iTunes Store offers a large variety of free content, but to download it you have to have an account. Usually you have to enter your credit card information to sign up, but here’s an easy way to get an iTunes account for free downloads without entering any payment info. Although iTunes Store is known for paid downloads of movies, music, and more, it also has a treasure trove of free media.  Some of it, including Podcasts and iTunes U educational content do not require an account to download.  However, any other free content, including free iPhone/iPod Touch apps and free or promotional music, videos, and TV Shows all require an account to download.  If you try to download a free movie or music download, you will be required to enter payment information. Even though your card will not be charged, it will be kept on file so you can be charged if you download a for-pay item.  However, if you only plan to download free items, it may be preferable to not have your account linked to a credit card. The following steps will get you an account without entering your credit card info. Getting Started First, make sure you have iTunes installed.  If you don’t already have it, download and install it (link below) with the default settings. Now open iTunes, and click the iTunes Store link on the left. Click the App Store link on the top of this page. Select a free app to download.  A simple way to do this is to scroll down to the Top Free Apps box on the right side, hover your mouse over the first item, and click on the Free button that appears when you hover over it. A popup will open asking you to sign in with your Apple ID.  Click “Create New Account”. Click Continue to create your account. Check the box to accept the Store Terms and Conditions, and click Continue.   Enter your email address, password, security question, and date of birth, and uncheck the boxes to get email if you don’t want it…then click Continue. Now, you will be asked to provide a payment method.  Notice now that the last option says None!  Click that bullet option… Then enter your billing address.  Simply enter your normal billing address, even though you are not entering a payment method.  Click Continue and your account will be created! If you get the Address Verification screen just verify your county and click Done. An email will be sent to you to verify your account… Click on the link in your email to verify your account, iTunes will launch and you’re prompted to enter in the Apple ID and Password you just created. Your account is successfully created! Now you can easily download any free media from iTunes.  Keep an eye on the Free on iTunes box on the bottom of the iTunes Store page for interesting downloads, or if you have an iPhone or iPod Touch, watch the popular Free downloads on the Apps page. And of course there is always great content on iTunes U to grab free as well. Purchasing for-pay media If you want to purchase an item on the iTunes store later, simply click on the item to download as normal.  Click Buy to proceed with the purchase. iTunes will prompt you that you need to enter payment information to complete the purchase.  Enter your Apple ID email and password, and then add the payment information as prompted.   Remove Payment Information from an iTunes Account If you’ve already entered payment information into your iTunes account, and would like to remove it, click Store in the top iTunes menu, and select View My Account. Enter your Apple ID email and password, and click View Account.   This will open your account information.  Click the Edit Payment Information button.   Now, click the None button to remove your payment information.  Click Done to save the changes. Your account will now prompt you to enter payment information if you try to make a purchase.  You could repeat these steps after making a purchase if you do not want iTunes to keep your payment info on file. Conclusion This is a great way to make an iTunes account without entering your credit card, or to remove your credit card info from your account.  Parents may especially enjoy this tip, as they can have an iTunes account on their kids computer or iPod Touch without worrying about them spending money with it. Links Download iTunes Similar Articles Productive Geek Tips Quick Tip: Switch Between Signatures in Outlook 2007 the Easy WayRedeem Pre-paid Zune Card Points for Zune Marketplace MediaCreate An Electronic Business Card In Outlook 2007Understanding Windows Vista Aero Glass RequirementsSpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Draw Online using Harmony How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually

  Read the article

• CodePlex Daily Summary for Saturday, June 12, 2010

  CodePlex Daily Summary for Saturday, June 12, 2010New ProjectsAdverTool (Advertisement tool): AdverTool is an online tool which integrates the most popular advertisement networks (such as Microsoft adCenter, Google AdWords, Yahoo! Search Mar...Authentication Configuration Tool for SharePoint: Helpful tools to automatically configure SharePoint 2007 and 2010 for forms based authentication and other authentication mechanisms.Bacicworx: A C# .Net 3.5 helper library containing functionality for compression, encryption, hashes, downloading, PayPal API, text analysis and generation, a...BlogEngine.Net iPhone Theme: A port of BETouch originally created by soundbbgBT UPnP Nat Library: This Library makes it extremly simple to add NAT upnp port forwarding to your .net applications. Developed in C# using .Net 4.0CheckBox & CheckBoxList Validators: These validators fill the much needed gap in the Asp.Net Server controlsDataFactories: The DataFactories project was created to provide a standardized interface to SSAS and MSSQL data. However, as it is implemented using the Abstract ...DVD Swarm: Converts unprotected DVD video & audio streams to H.264 with AAC/Vorbis.Frio IM: Frio IM - is cross protocol instant messenger.jiuyuan: jiuyuan management systemMGM: MyGroupManager is a simple graphical interface written in PowerShell that can be deployed to Active Directory users to simplify the managed of grou...MGR2010: This the MA thesis by Witold Stanik & Michał Sereja, PJWSTK.Nauplius.ActiveDirectory: Web-based Active Directory management.Partial rendering control using JQuery: This article show a web custom control that allows partial rendering using JQueryREG - The Random Entertainment Generator: A simple tool to make your mid up when you can't figure out what you want to do!Runes of Magic - Heilerrechner: Heilerrechner für die Heiler von Runes of Magic (www.runes.ofmagic.com)Semagsoft Calculator: Basic calculator for Windows XP, Vista and Windows 7.SO League Tables: SOLT: Stack Overflow League Tables. A fun little app that lets you compare your stack overflow performance for each month, relative to other member...Stacky StackApps .Net Client Library: StackApps is a REST API for which provides access to the stackoverflow.com family of websites. Stacky is a .net client for that API. Stacky current...TwitterDotNet: TwitterDotNet is a TwitterLibrary for .NET Framework.ValiVIN: VIN (Vehicle Identification Number) Validator Validate Vin NumberWorkLogger: Simple work hour logger in WPFNew ReleasesAdverTool (Advertisement tool): Official releases: Please visit http://advertool.org to access the complete source code and downloads.Authentication Configuration Tool for SharePoint: Auth Config Tool (WSS 3.0, MOSS 2007 version): This tool automates the setup of dual authentication web applications in SharePoint that use Windows Authentication and Forms Based Authentication....BlogEngine.Net iPhone Theme: Version 0.1: Original version 0.1 from soundbbgBraintree Client Library: Braintree-2.3.0: Return AvsErrorResponseCode, AvsPostalCodeResponseCode, AvsStreetAddressResponseCode, CurrencyIsoCode, CvvResponseCode with Transaction Return Cr...BT UPnP Nat Library: Bt_Upnp Nat Library Alpha: Alpha Release of the libraryCNZK Library: Silverlight Behaviors - Deep Zoom Tag Filter: Behavior library for Silverlight 4 containing a Deep Zoom Tag Filter Behavior. Sample at the Expression Gallery http://gallery.expression.microsof...Demina: Demina Binaries version 0.2: Updated binaries. This release contains all of the new features, including simple animation transitions.DTLoggedExec: 1.0.0.2: -Fixed a bug that prevented loading packages from SSIS Package Store -Added support for {filename} placeholder in both Data Flow Profiling and CSV ...DVD Swarm: v0.8.10.611: Initial release, mostly stable.Exchange 2010 RBAC Editor (RBAC GUI) - updated on 6/11/2010: RBAC Editor 0.9.5.1: now supports creating and editing Role Assignment Policies; rest of the stuff is the same - still a lot of way to go :) Please use email address i...Extend SmallBasic: Teaching Extensions v.021: Compatible with SmallBasic v0.9 Lame version of TicTacToe Added - more coming later.Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.1 GA Released: Hi, Today we are releasing Visifire 3.1.1 GA with the following features: * Logarithmic Axis * ShowIndicator() in Chart. * HideIndica...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.4 GA Released: Hi, Today we are releasing Visifire 3.1.1 GA with the following features: Logarithmic Axis ShowIndicator() in Chart. HideIndicator() in Chart...Keep Focused - an enhanced tool for Time Management using Pomodoro Technique: Release 0.3.1 Alpha: Release 0.3.1 Alpha Technical patch. The previous release 0.3 Alpha had some errors and missing features. It was probably not build from the source...Mesopotamia Experiment: Mesopotamia 1.2.96: Bug Fixes - Fixed duplicate cells being added on creating new cells via mutations - Fixed bug where organisms without IO synapses where getting ios...NLog - Advanced .NET Logging: Nightly Build 2010.06.11.001: Changes since the last build:No changes. Unit test results:Passed 243/243 (100%) Passed 243/243 (100%) Passed 267/267 (100%) Passed 269/269 (100%)...Partial rendering control using JQuery: JQuery Web Control V 1.0: This is the first release of the code. It includes the source code and a web application to see how it worksphpxw: Phpxw2.0: 框架目录说明 ./_mod 模块存放目录 ./phpxw/ 框架核心目录 ./phpxw/common/ 框架核心函数 ./phpxw/system/ 框架核心基础类存放目录 ./phpxw/userlib/ 用户继承类存放目录 ./temp...Questionable Content Screensaver: Questionable Content Screensaver: Should be pretty self explanatory, install the appropriate version for your computer (x64 or x86). Features Include Cache comics for offline viewi...Quick Performance Monitor: Version 1.4.1: Added option to change the 'minimum' maximum value visible on the graph at run-time. Also fixed a number of other bugs.Refix - .NET dependency management: Refix v0.1.0.82 ALPHA: This has now been run against a real life project to tease out some of the issues. While this remains alpha software, which you use at your own ris...Rhyduino - Arduino and Managed Code: Beta Release (v0.8.2): ContentsSample Project - Demonstrates basic functionality and is flooded with code comments, so it's capable of being used as a learning tool. It d...Runes of Magic - Heilerrechner: Rom_Heiler_0.1: Erste Version von "RoM Heilerrechner". .Net 4.0 Framework wird vorausgesetzt. Das erhälst du hier: http://www.microsoft.com/downloads/details.aspx?...Semagsoft Calculator: 2.0: new theme and bug fix'sSilverlight Reporting: Release 2: Updated to correct issue in report footer xaml, and to add support for a calculated report footer.Stacky StackApps .Net Client Library: Beta Preview: This is a beta preview to go along with the StackApps beta.TwitterDotNet: TwitterDotNet Library: first versionUnOfficial AW Wrapper dot Net: Aw Wrapper 1.0.0.0 (5.0): New Functions :DValiVIN: ValiVIN first release: First Iteration. METHODS: IsValid(string vin) - Checks if a string is a valid VIN (returns true or false) GetCheckSumValue(string vin) - Returns...VCC: Latest build, v2.1.30611.0: Automatic drop of latest buildViewModelSupport: ViewModelSupport 1.0: Version 1.0 More information: http://houseofbilz.net/archives/2010/05/08/adventures-in-mvvm-my-viewmodel-base/ http://houseofbilz.net/archives/201...VolgaTransTelecomClient: v.1.0.3.0: v.1.0.3.0WCF Client Generator: Version 0.9.3.19259: Changed: - Always generate full type names for parameters and return typesWCF Client Generator: Version 0.9.3.21153: Fixed: - Service contracts namespace generation Added: - Templates assembly code base read from configurationXen: Graphics API for XNA: Xen 2.0 ALPHA: This is a very early alpha for Xen 2.0. Please note: The documentation for this alpha has not been updated yet. Xen 2.0 is not backwards compatib...ZGuideTV.NET: ZGuideTV.NET 0.93: Vendredi 11 avril 2010 (ZGuideTV.NET bêta 9 build 0.93) - English below Ajout : - Classement du contenu dans la description (affichage légende si...Most Popular ProjectsCAML GeneratorSharePoint Geographic Data VisualizerDbIdiom for ADO.NET CorestudyDTSRun Job RunnerXBStudio.asp.net.automationSilverlight load on demand with MEFCloud Business ServicesSharePoint 2010 Taxonomy Import UtilitySTS Federation Metadata EditorMost Active ProjectsRhyduino - Arduino and Managed Codepatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleCommunity Forums NNTP bridgeCassandraemonBlogEngine.NETMediaCoder.NETMicrosoft Silverlight Media FrameworkAndrew's XNA Helpers

  Read the article

• Passing multiple simple POST Values to ASP.NET Web API

  - by Rick Strahl

  A few weeks backs I posted a blog post  about what does and doesn't work with ASP.NET Web API when it comes to POSTing data to a Web API controller. One of the features that doesn't work out of the box - somewhat unexpectedly -  is the ability to map POST form variables to simple parameters of a Web API method. For example imagine you have this form and you want to post this data to a Web API end point like this via AJAX: <form> Name: <input type="name" name="name" value="Rick" /> Value: <input type="value" name="value" value="12" /> Entered: <input type="entered" name="entered" value="12/01/2011" /> <input type="button" id="btnSend" value="Send" /> </form> <script type="text/javascript"> $("#btnSend").click( function() { $.post("samples/PostMultipleSimpleValues?action=kazam", $("form").serialize(), function (result) { alert(result); }); }); </script> or you might do this more explicitly by creating a simple client map and specifying the POST values directly by hand:$.post("samples/PostMultipleSimpleValues?action=kazam", { name: "Rick", value: 1, entered: "12/01/2012" }, $("form").serialize(), function (result) { alert(result); }); On the wire this generates a simple POST request with Url Encoded values in the content:POST /AspNetWebApi/samples/PostMultipleSimpleValues?action=kazam HTTP/1.1 Host: localhost User-Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:15.0) Gecko/20100101 Firefox/15.0.1 Accept: application/json Connection: keep-alive Content-Type: application/x-www-form-urlencoded; charset=UTF-8 X-Requested-With: XMLHttpRequest Referer: http://localhost/AspNetWebApi/FormPostTest.html Content-Length: 41 Pragma: no-cache Cache-Control: no-cachename=Rick&value=12&entered=12%2F10%2F2011 Seems simple enough, right? We are basically posting 3 form variables and 1 query string value to the server. Unfortunately Web API can't handle request out of the box. If I create a method like this:[HttpPost] public string PostMultipleSimpleValues(string name, int value, DateTime entered, string action = null) { return string.Format("Name: {0}, Value: {1}, Date: {2}, Action: {3}", name, value, entered, action); }You'll find that you get an HTTP 404 error and { "Message": "No HTTP resource was found that matches the request URI…"} Yes, it's possible to pass multiple POST parameters of course, but Web API expects you to use Model Binding for this - mapping the post parameters to a strongly typed .NET object, not to single parameters. Alternately you can also accept a FormDataCollection parameter on your API method to get a name value collection of all POSTed values. If you're using JSON only, using the dynamic JObject/JValue objects might also work. ModelBinding is fine in many use cases, but can quickly become overkill if you only need to pass a couple of simple parameters to many methods. Especially in applications with many, many AJAX callbacks the 'parameter mapping type' per method signature can lead to serious class pollution in a project very quickly. Simple POST variables are also commonly used in AJAX applications to pass data to the server, even in many complex public APIs. So this is not an uncommon use case, and - maybe more so a behavior that I would have expected Web API to support natively. The question "Why aren't my POST parameters mapping to Web API method parameters" is already a frequent one… So this is something that I think is fairly important, but unfortunately missing in the base Web API installation. Creating a Custom Parameter Binder Luckily Web API is greatly extensible and there's a way to create a custom Parameter Binding to provide this functionality! Although this solution took me a long while to find and then only with the help of some folks Microsoft (thanks Hong Mei!!!), it's not difficult to hook up in your own projects. It requires one small class and a GlobalConfiguration hookup. Web API parameter bindings allow you to intercept processing of individual parameters - they deal with mapping parameters to the signature as well as converting the parameters to the actual values that are returned. Here's the implementation of the SimplePostVariableParameterBinding class:public class SimplePostVariableParameterBinding : HttpParameterBinding { private const string MultipleBodyParameters = "MultipleBodyParameters"; public SimplePostVariableParameterBinding(HttpParameterDescriptor descriptor) : base(descriptor) { } /// <summary> /// Check for simple binding parameters in POST data. Bind POST /// data as well as query string data /// </summary> public override Task ExecuteBindingAsync(ModelMetadataProvider metadataProvider, HttpActionContext actionContext, CancellationToken cancellationToken) { // Body can only be read once, so read and cache it NameValueCollection col = TryReadBody(actionContext.Request); string stringValue = null; if (col != null) stringValue = col[Descriptor.ParameterName]; // try reading query string if we have no POST/PUT match if (stringValue == null) { var query = actionContext.Request.GetQueryNameValuePairs(); if (query != null) { var matches = query.Where(kv => kv.Key.ToLower() == Descriptor.ParameterName.ToLower()); if (matches.Count() > 0) stringValue = matches.First().Value; } } object value = StringToType(stringValue); // Set the binding result here SetValue(actionContext, value); // now, we can return a completed task with no result TaskCompletionSource<AsyncVoid> tcs = new TaskCompletionSource<AsyncVoid>(); tcs.SetResult(default(AsyncVoid)); return tcs.Task; } private object StringToType(string stringValue) { object value = null; if (stringValue == null) value = null; else if (Descriptor.ParameterType == typeof(string)) value = stringValue; else if (Descriptor.ParameterType == typeof(int)) value = int.Parse(stringValue, CultureInfo.CurrentCulture); else if (Descriptor.ParameterType == typeof(Int32)) value = Int32.Parse(stringValue, CultureInfo.CurrentCulture); else if (Descriptor.ParameterType == typeof(Int64)) value = Int64.Parse(stringValue, CultureInfo.CurrentCulture); else if (Descriptor.ParameterType == typeof(decimal)) value = decimal.Parse(stringValue, CultureInfo.CurrentCulture); else if (Descriptor.ParameterType == typeof(double)) value = double.Parse(stringValue, CultureInfo.CurrentCulture); else if (Descriptor.ParameterType == typeof(DateTime)) value = DateTime.Parse(stringValue, CultureInfo.CurrentCulture); else if (Descriptor.ParameterType == typeof(bool)) { value = false; if (stringValue == "true" || stringValue == "on" || stringValue == "1") value = true; } else value = stringValue; return value; } /// <summary> /// Read and cache the request body /// </summary> /// <param name="request"></param> /// <returns></returns> private NameValueCollection TryReadBody(HttpRequestMessage request) { object result = null; // try to read out of cache first if (!request.Properties.TryGetValue(MultipleBodyParameters, out result)) { // parsing the string like firstname=Hongmei&lastname=Ge result = request.Content.ReadAsFormDataAsync().Result; request.Properties.Add(MultipleBodyParameters, result); } return result as NameValueCollection; } private struct AsyncVoid { } }   The ExecuteBindingAsync method is fired for each parameter that is mapped and sent for conversion. This custom binding is fired only if the incoming parameter is a simple type (that gets defined later when I hook up the binding), so this binding never fires on complex types or if the first type is not a simple type. For the first parameter of a request the Binding first reads the request body into a NameValueCollection and caches that in the request.Properties collection. The request body can only be read once, so the first parameter request reads it and then caches it. Subsequent parameters then use the cached POST value collection. Once the form collection is available the value of the parameter is read, and the value is translated into the target type requested by the Descriptor. SetValue writes out the value to be mapped. Once you have the ParameterBinding in place, the binding has to be assigned. This is done along with all other Web API configuration tasks at application startup in global.asax's Application_Start:GlobalConfiguration.Configuration.ParameterBindingRules .Insert(0, (HttpParameterDescriptor descriptor) => { var supportedMethods = descriptor.ActionDescriptor.SupportedHttpMethods; // Only apply this binder on POST and PUT operations if (supportedMethods.Contains(HttpMethod.Post) || supportedMethods.Contains(HttpMethod.Put)) { var supportedTypes = new Type[] { typeof(string), typeof(int), typeof(decimal), typeof(double), typeof(bool), typeof(DateTime) }; if (supportedTypes.Where(typ => typ == descriptor.ParameterType).Count() > 0) return new SimplePostVariableParameterBinding(descriptor); } // let the default bindings do their work return null; });   The ParameterBindingRules.Insert method takes a delegate that checks which type of requests it should handle. The logic here checks whether the request is POST or PUT and whether the parameter type is a simple type that is supported. Web API calls this delegate once for each method signature it tries to map and the delegate returns null to indicate it's not handling this parameter, or it returns a new parameter binding instance - in this case the SimplePostVariableParameterBinding. Once the parameter binding and this hook up code is in place, you can now pass simple POST values to methods with simple parameters. The examples I showed above should now work in addition to the standard bindings. Summary Clearly this is not easy to discover. I spent quite a bit of time digging through the Web API source trying to figure this out on my own without much luck. It took Hong Mei at Micrsoft to provide a base example as I asked around so I can't take credit for this solution :-). But once you know where to look, Web API is brilliantly extensible to make it relatively easy to customize the parameter behavior. I'm very stoked that this got resolved  - in the last two months I've had two customers with projects that decided not to use Web API in AJAX heavy SPA applications because this POST variable mapping wasn't available. This might actually change their mind to still switch back and take advantage of the many great features in Web API. I too frequently use plain POST variables for communicating with server AJAX handlers and while I could have worked around this (with untyped JObject or the Form collection mostly), having proper POST to parameter mapping makes things much easier. I said this in my last post on POST data and say it again here: I think POST to method parameter mapping should have been shipped in the box with Web API, because without knowing about this limitation the expectation is that simple POST variables map to parameters just like query string values do. I hope Microsoft considers including this type of functionality natively in the next version of Web API natively or at least as a built-in HttpParameterBinding that can be just added. This is especially true, since this binding doesn't affect existing bindings. Resources SimplePostVariableParameterBinding Source on GitHub Global.asax hookup source Mapping URL Encoded Post Values in  ASP.NET Web API© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api  AJAX   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Enabling Http caching and compression in IIS 7 for asp.net websites

  - by anil.kasalanati

  Caching – There are 2 ways to set Http caching 1-      Use Max age property 2-      Expires header. Doing the changes via IIS Console – 1.       Select the website for which you want to enable caching and then select Http Responses in the features tab       2.       Select the Expires webcontent and on changing the After setting you can generate the max age property for the cache control    3.       Following is the screenshot of the headers   Then you can use some tool like fiddler and see 302 response coming from the server. Doing it web.config way – We can add static content section in the system.webserver section <system.webServer>   <staticContent>             <clientCache cacheControlMode="UseMaxAge" cacheControlMaxAge="365.00:00:00" />   </staticContent> Compression - By default static compression is enabled on IIS 7.0 but the only thing which falls under that category is CSS but this is not enough for most of the websites using lots of javascript.  If you just thought by enabling dynamic compression would fix this then you are wrong so please follow following steps –   In some machines the dynamic compression is not enabled and following are the steps to enable it – Open server manager Roles > Web Server (IIS) Role Services (scroll down) > Add Role Services Add desired role (Web Server > Performance > Dynamic Content Compression) Next, Install, Wait…Done!   ?  Roles > Web Server (IIS) ?  Role Services (scroll down) > Add Role Services     Add desired role (Web Server > Performance > Dynamic Content Compression)     Next, Install, Wait…Done!     Enable  - ?  Open server manager ?  Roles > Web Server (IIS) > Internet Information Services (IIS) Manager   Next pane: Sites > Default Web Site > Your Web Site Main pane: IIS > Compression         Then comes the custom configuration for encrypting javascript resources. The problem is that the compression in IIS 7 completely works on the mime types and by default there is a mismatch in the mime types Go to following location C:\Windows\System32\inetsrv\config Open applicationHost.config The mimemap is as follows  <mimeMap fileExtension=".js" mimeType="application/javascript" />   So the section in the staticTypes should be changed          <add mimeType="application/javascript" enabled="true" />     Doing the web.config way –   We can add following section in the system.webserver section <system.webServer> <urlCompression doDynamicCompression="false"  doStaticCompression="true"/> More Information/References – ·         http://weblogs.asp.net/owscott/archive/2009/02/22/iis-7-compression-good-bad-how-much.aspx ·         http://www.west-wind.com/weblog/posts/98538.aspx  

  Read the article

• CodePlex Daily Summary for Monday, March 08, 2010

  CodePlex Daily Summary for Monday, March 08, 2010New Projects38fj4ncg2: 38fj4ncg2Ac#or: A actor framework written in Mono (C#) Make it easy to make multithreaded programs with the actor model.Aerial Phone Book: It's a ASP app that allow more of one user see a contacts on phone book and add new contacts. This way a group of users can maintain a common phon...AmiBroker Plug-Ins with C#: Plug-ins for AmiBroker built with Microsoft .NET Framework and C#.AxUnit: AxUnit is a Unit Testing framework for Microsoft Dynamics Ax (X++). It's an extension to the SysTest framework provided with DAX4.0 and newer versi...Botola PHP Class: Une class en PHP qui vous permet d'avoir les informations qui concernent les équipes de le championnat Marocain du football.Code examples, utilities and misc from Lars Wilhelmsen [MVP]: Misc. stuff from Lars Wilhelmsen.Codename T: Codename T is in the very basic stages of development. It should be ready for beta testing by the start of April.ComBrowser: combrowserCompact Unity: The Compact Unity is a lightweight dependency injection container with support for constructor and property call injection written in .NET Compact ...FAST for Sharepoint MOSS 2010 Query Tool: Tool to query FAST for Sharepoint and Sharepoint 2010 Enterprise Search. It utilizes the search web services to run your queries so you can test y...Icarus Scene Engine: Icarus Scene Engine is a cross-platform 3D eLearning, games and simulation engine, integrating open source APIs into a cohesive cross-platform solu...jQuery.cssLess: jQuery plugin that interprets and loads LESS css files. (http://lesscss.org).Katara Dental Phase II: Second phase of Kdpl.Lunar Phase Silverlight Gadget: Meet the moon phase, percent of illumination and corresponding zodiac sign from your desktop. Reflection Studio: Reflection Studio is a development tool that encapsulate all my work around reflection, performance and WPF. It allows to inject performance traces...RSNetty: RSNetty is a RuneScape Private Server programmed in the Java programming language.Simple WMV/ASF files muxer/demuxer: Simple WMV files muxer/demuxer implemented in C#/C++. It has simple WPF-based UI and allows copy/replace operations on video, audio and script stre...sm: managerTFS Proxy Monitor: TFS Proxy Monitor. A winform application allow administrator can monitor the TFS Server Proxy statistics remotely.umbracoSamplePackageCreator (beta): This is an early version of a simple package creator for Umbraco as a Visual Studio project. Currently with an Xslt extension and a user control. O...WatchersNET.TagCloud: 3D Flash TagCloud Module for DotNetNukeWriterous: A Plug-in For Windows Live Writer: This plug-in for Live Writer allows the user to create their post in Live Writer and then publish to Posterous.comNew Releases.NET Extensions - Extension Methods Library: Release 2010.05: Added a common set of extension methods for IDataReader, DataRow and DataRowView to access field values in a type safe manner using type dedicated ...AmiBroker Plug-Ins with C#: AmiBroker Plug-Ins v0.0.1: This is just a demo plug-in which shows how you can write plug-ins for AmiBroker with fully managed code.AxUnit: Version 1: AxUnit let's you write Unit Test assertions in Dynamics Ax like this: assert.that(2, is.equalTo2)); Installation instructions (Microsoft Dynamics ...BattLineSvc: V2: - Fixed bug where sometimes the line would not show up, even with the 90 second boot-up delay. This was due to the window being created too early ...Botola PHP Class: Botola API: la classe PHPBugTracker.NET: BugTracker.NET 3.4.0: In screen capture app, "Go to website" now goes to the bug you just created. In screen capture app, fixed where the crosshairs weren't always to...Bulk Project Delete: Version 1.1.1: A minor fix to 1.1: fixes a problem that indicated some projects were not found on the server when they were in fact found. This problem only exist...C# Linear Hash Table: Linear Hash Table b3: Remove functionality added. Now IDictionary Compliant, but most functions not yet tested.Code examples, utilities and misc from Lars Wilhelmsen [MVP]: LarsW.MexEdmxFixer 1.0: A quick hack to fix the Edmx files output by mex.exe (a tool in the SQL Modeling suite - November 2009 CTP) so that they can be opened in the desig...Code Snippet With Syntaxhighlighter Support for Windows Live Writer: Version 5.0.2: Minor update. Added brushes for F#, PowerShell and Erlang. Now a Windows Presentation Framework (WPF) application. ComponentFactory.Krypton.Toolki...Compact Unity: Compact Unity 1.0: Release.Compact Unity: CompactUnity 1.0: Release.FAST for Sharepoint MOSS 2010 Query Tool: Version 0.9: The tool is fully functioning. All of the cases for exceptions may not have been caught yet. I wanted to release a version to allow people to use...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite RC (for .NET 4.0 RC): Build for .NET 4.0 RC. Includes Fluent.dll (with .pdb and .xml) and test application compiled with .NET 4.0 RC. BEAWARE! Fluent for .NET 4.0 RC is...FluentNHibernate.Search: 0.2 Beta: 0.2 Beta Fixed : #7275 - Field Mapping without specifying "Name" Fixed : #7271 - StackOverFlow Exception while Configure Embedded Mappings Fixed :...InfoService: InfoService v1.5 Beta 9: InfoService Beta Release Please note this is a BETA. It should be stable, but i can't guarantee that! So use it on your own risk. Please read Plug...jQuery.cssLess: jQuery.cssLess 0.2: Version supports variables, mixins and nested rules. TODO: lower scope variables and mixins should not delete higher scope variables and mixins ...Lunar Phase Silverlight Gadget: Lunar Phase: First public beta for Lunar Phase Silverlight Gadget. It's a stable release but it hasn't auto update state. That will come with the final release ...MapWindow GIS: MapWindow 6.0 msi (March 7): This is an update that fixes a number of problems with the multi-point features, the M and Z features as well as enabling multi-part creation using...Mews: Mews.Application V0.7: Installation InstuctionsNew Features15390 15085 Fixed Issues16173 16552. This happens when the database maintenance process kicks in during sta...sELedit: sELedit v1.0a: Added: Basic exception handlers (load/save/export) Added: List 57 support (no search and replace) Added: MYEN 1.3.1 Client ->CN 1.3.6 Server export...Sem.Sync: 2010-03-07 - End user client for Xing to Outlook: This client does include the binaries for syncing Xing contacts to Microsoft Outlook. It does contain only the binaries to sync from Xing to Outloo...Sem.Sync: 2010-03-07 - Synchronization Manager: This client does provide a more advanced (and more complex) GUI that allows you to select from two included templates (you can add your own, too) a...SharePoint Outlook Connector: Source Code for Version 1.2.3.2: Source Code for Version 1.2.3.2SharePoint Video Player Web Part & SharePoint Video Library: Version 2.0.0: Release Notes: New The new SharePoint Video Player release includes a SharePoint video template to create your own video library Changes The Shar...SilverSprite: SilverSprite 3.0 Alpha 2: These are the latest binaries for SilverSprite. The major changes for this release are that we are now using the XNA namespaces (no more #Iif SILVE...Simple WMV/ASF files muxer/demuxer: Initial release: Initial releaseStarter Master Pages for SharePoint 2010: Starter Master Pages for SP2010 - RC: Release Candidate release of Starter Master Pages for SharePoint 2010 by Randy Drisgill http://blog.drisgill.com _starter.master - Starter Master ...Text Designer Outline Text Library: 11th minor release: New Feature : Reflection!!ToolSuite.ValidationExpression: 01.00.01.002: second release of the validation class; the assembly file is ready to use, the documentation is complete;Truecrafting: Truecrafting 0.51: overhauled truecrafting code: combined all engines into 1 mage engine, made the engine and artificial intelligence support any spec, and achieved a...WatchersNET.TagCloud: WatchersNET.TagCloud 01.00.00: First ReleaseWCF Contrib: WCF Contrib v2.1 Mar07: This release is the final version of v2.1 Beta that was published on February 10th. Below you will find the changes that were made: Changes from v...WillStrohl.LightboxGallery Module for DotNetNuke: WillStrohl.LightboxGallery v1.02.00: This version of the Lightbox Gallery Module adds the following features: New Lightbox provider: Fancybox Thumbnails generated keeping their aspec...Writerous: A Plug-in For Windows Live Writer: Writerous v1.0: This is the first release of Writerous.WSDLGenerator: WSDLGenerator 0.0.0.5: - Use updated CommandLineParser.dll - Code uses 'ServiceDescriptionReflector' instead of custom code. - Added option to support SharePoint 2007 com...Xpress - ASP.NET MVC 个人博客程序: xpress2.1.0.beta.bin: 原 DsJian1.0的升级版本，名字修改为 xpress 此正式版本YSCommander: Version 1.0.1.0: Fixed bug: 1st start with non-existing data file.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesImage Resizer Powertoy Clone for WindowsMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFluent AssertionsFasterflect - A Fast and Simple Reflection API

  Read the article

• CodePlex Daily Summary for Wednesday, December 08, 2010

  CodePlex Daily Summary for Wednesday, December 08, 2010Popular ReleasesAlgorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SubtitleTools: SubtitleTools 1.1: Added a better ToUTF-8 converter (not just from windows-1256 to utf-8). Refactored OpenFileDialogs to a more MVVM friendly behavior.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueHydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.1.340: HydroDesktop 1.1 Stable Release (Build 340)CslaGenFork: CslaGenFork 4.0 CTP 2: The version is 4.0.1 CTP2 and was released 2010 December 7 and includes the following files: CslaGenFork 4.0.1-2010-12-07 Setup.msi Templates-2010-10-07.zip For getting started instructions, refer to How to section. Overview of the changes Since CTP1 there were 53 work items closed (28 features, 24 issues and 1 task). During this 60 days a lot of work has been done on several areas. First the stereotypes: EditableRoot is OK EditableChild is OK EditableRootCollection is OK Editable...My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.EnhSim: EnhSim 2.2.0 ALPHA: 2.2.0 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated En...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...MiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide New ProjectsCore Motives Tracking Web Part: This C# web part was created to allow users of SharePoint 2007 to place CoreMotives (http://www.coremotives.com) tracking code on any web part page. Can also be used in master pages and page layouts.CPEBook: OsefEatFrsh: Keep Track of contents of your Fridge. Eat items while they are still fresh.ENUH10Publisher: Et prosjekt for studenter ved eCademy H10EVE Community Portal: EVE Community Portal is a complete community portal for EVE alliances (and corporations), which will host everything an eve alliance needs, from a forum and blogs to every tool you could whish for and more...FER CSLA.NET Compact: .NET Compact Framework edition of CSLA.NET application framework.Finger Mouse: it's a good idea and simple program help you to use the mouse feature from webcam (without mouse) note : you should have i3 or higher processorGambaru: Gambaru é um techdemo de um game 3D desenvolvido em Delphi. Utiliza engine de física Newton e Open GL (pacote GL-Scene). Foi apresentado como trabalho de conclusão de curso no SENAC-SP por Marcelo, Daniel e Thais em 2007. Exploramos o universo Samurai. Contribua, programe, sonhe!GameBoyEmu: ????，GameBoy ???GenericList Inherits IDataReader ( ListEx<T>() : IDataReader ): This Generic List implements the IDataReader interface and displays the usage of Linq, Lamba expressions and some creative thought around working with collection types. I hope it can serve as reference to your projects.Guard: Provides the argument validation class Guard, ubiquitously used throughout all .NET projects but with no central place for updates.HolidayChecker Library: HolidayChecker Library is a usefull library that allows programmers to know if a certain date is a festivity or not. This library also allows the calculation of Easter day based on the algorithm of Tondering. It's developed in C#.JuniorTour - Junior Golf Tour Silverlight Application: JuniorTour makes it easier for golf tour operators to publish tournament results for multiple divisions and multiple seasons. You'll no longer have to manually edit player pages, tournament results, or compute rankings. It's developed in C# and Silverlight.LibGT: LibGT aims to reduce the amount of overall code a programmer has to write in C#. This library provides many shortcuts and extension methods to facilitate robust development rapidly even without the use of an IDE.Mayhem: Mayhem makes it simple for end users to control complex events with their PCs. Whether you want to Update a Twitter status when your cat is detected by your webcam or monitor your serial ports and trigger events, it's no problem with Mayhem -- wreak your own personal havoc.mmht: ???????，??????MobilePolice: my mobilepolice projectOpenCallback: This is a implementation of the callback handler pattern that allows you to invoke the callback handle methods with out type switching or if...else if chains.Project Baron: Simple, yet powerful Project Management System.PS3Lib for SDK 1.92: Création d'une librairie de ceveloppement pour le SDK 1.92Remote Controller for Trackmania: Evzrecon is a remote controller for Trackmania Forever dedicated servers, much like XASECO but written in Java.SharePointSocial: SharePointSocial is focused on taking social interaction within SharePoint to the next level, extending beyond the corporate boundaries. Corporate listening, one-click interaction through key social media outlets and data-driven management and reporting are planned features.SIGS: ssSimple Routing: Simple Routing allows you to associate arbitrary routes with static methods in an ASP.NET application through attribution.SlimCRM: Aplicación de referencia de buenas prácticas de programaciónTalkBoard: ????????，?????????！uHelpsy - Umbraco Helper Library: uHelpsy is a tiny (but growing) library which makes programatically interacting with Umbraco 4.5.2 much more pleasant. It provides helper methods for creating and updating nodes, working with the Umbraco cache, and dealing with unpublished nodes. VCSS: VCSS is a decorated version of CSS (Cascading Style Sheets) that allows you to specify variables and also nest rules. The VCSS file can be compiled into a standard CSS file to be used on any website.Vote: ?，???????????????！WP7 GPS Simulator: Use this project to simulate GPS while doing development on your Windows Phone 7.WPF_CAD: this proyect it's a college proyect form grafic computer course. Consist in the development of a cad soft implementing all grafics algoritms.Xml-Racing: Réaliser une application Web 3-tiers qui permette d'interroger une BD et de restituer les infos sous forme de graphiques et cartes.

  Read the article

• Translating with Google Translate without API and C# Code

  - by Rick Strahl

  Some time back I created a data base driven ASP.NET Resource Provider along with some tools that make it easy to edit ASP.NET resources interactively in a Web application. One of the small helper features of the interactive resource admin tool is the ability to do simple translations using both Google Translate and Babelfish. Here's what this looks like in the resource administration form: When a resource is displayed, the user can click a Translate button and it will show the current resource text and then lets you set the source and target languages to translate. The Go button fires the translation for both Google and Babelfish and displays them - pressing use then changes the language of the resource to the target language and sets the resource value to the newly translated value. It's a nice and quick way to get a quick translation going. Ch… Ch… Changes Originally, both implementations basically did some screen scraping of the interactive Web sites and retrieved translated text out of result HTML. Screen scraping is always kind of an iffy proposition as content can be changed easily, but surprisingly that code worked for many years without fail. Recently however, Google at least changed their input pages to use AJAX callbacks and the page updates no longer worked the same way. End result: The Google translate code was broken. Now, Google does have an official API that you can access, but the API is being deprecated and you actually need to have an API key. Since I have public samples that people can download the API key is an issue if I want people to have the samples work out of the box - the only way I could even do this is by sharing my API key (not allowed).   However, after a bit of spelunking and playing around with the public site however I found that Google's interactive translate page actually makes callbacks using plain public access without an API key. By intercepting some of those AJAX calls and calling them directly from code I was able to get translation back up and working with minimal fuss, by parsing out the JSON these AJAX calls return. I don't think this particular Warning: This is hacky code, but after a fair bit of testing I found this to work very well with all sorts of languages and accented and escaped text etc. as long as you stick to small blocks of translated text. I thought I'd share it in case anybody else had been relying on a screen scraping mechanism like I did and needed a non-API based replacement. Here's the code: /// <summary> /// Translates a string into another language using Google's translate API JSON calls. /// <seealso>Class TranslationServices</seealso> /// </summary> /// <param name="Text">Text to translate. Should be a single word or sentence.</param> /// <param name="FromCulture"> /// Two letter culture (en of en-us, fr of fr-ca, de of de-ch) /// </param> /// <param name="ToCulture"> /// Two letter culture (as for FromCulture) /// </param> public string TranslateGoogle(string text, string fromCulture, string toCulture) { fromCulture = fromCulture.ToLower(); toCulture = toCulture.ToLower(); // normalize the culture in case something like en-us was passed // retrieve only en since Google doesn't support sub-locales string[] tokens = fromCulture.Split('-'); if (tokens.Length > 1) fromCulture = tokens[0]; // normalize ToCulture tokens = toCulture.Split('-'); if (tokens.Length > 1) toCulture = tokens[0]; string url = string.Format(@"http://translate.google.com/translate_a/t?client=j&text={0}&hl=en&sl={1}&tl={2}", HttpUtility.UrlEncode(text),fromCulture,toCulture); // Retrieve Translation with HTTP GET call string html = null; try { WebClient web = new WebClient(); // MUST add a known browser user agent or else response encoding doen't return UTF-8 (WTF Google?) web.Headers.Add(HttpRequestHeader.UserAgent, "Mozilla/5.0"); web.Headers.Add(HttpRequestHeader.AcceptCharset, "UTF-8"); // Make sure we have response encoding to UTF-8 web.Encoding = Encoding.UTF8; html = web.DownloadString(url); } catch (Exception ex) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.ConnectionFailed + ": " + ex.GetBaseException().Message; return null; } // Extract out trans":"...[Extracted]...","from the JSON string string result = Regex.Match(html, "trans\":(\".*?\"),\"", RegexOptions.IgnoreCase).Groups[1].Value; if (string.IsNullOrEmpty(result)) { this.ErrorMessage = Westwind.Globalization.Resources.Resources.InvalidSearchResult; return null; } //return WebUtils.DecodeJsString(result); // Result is a JavaScript string so we need to deserialize it properly JavaScriptSerializer ser = new JavaScriptSerializer(); return ser.Deserialize(result, typeof(string)) as string; } To use the code is straightforward enough - simply provide a string to translate and a pair of two letter source and target languages: string result = service.TranslateGoogle("Life is great and one is spoiled when it goes on and on and on", "en", "de"); TestContext.WriteLine(result); How it works The code to translate is fairly straightforward. It basically uses the URL I snagged from the Google Translate Web Page slightly changed to return a JSON result (&client=j) instead of the funky nested PHP style JSON array that the default returns. The JSON result returned looks like this: {"sentences":[{"trans":"Das Leben ist großartig und man wird verwöhnt, wenn es weiter und weiter und weiter geht","orig":"Life is great and one is spoiled when it goes on and on and on","translit":"","src_translit":""}],"src":"en","server_time":24} I use WebClient to make an HTTP GET call to retrieve the JSON data and strip out part of the full JSON response that contains the actual translated text. Since this is a JSON response I need to deserialize the JSON string in case it's encoded (for upper/lower ASCII chars or quotes etc.). Couple of odd things to note in this code: First note that a valid user agent string must be passed (or at least one starting with a common browser identification - I use Mozilla/5.0). Without this Google doesn't encode the result with UTF-8, but instead uses a ISO encoding that .NET can't easily decode. Google seems to ignore the character set header and use the user agent instead which is - odd to say the least. The other is that the code returns a full JSON response. Rather than use the full response and decode it into a custom type that matches Google's result object, I just strip out the translated text. Yeah I know that's hacky but avoids an extra type and firing up the JavaScript deserializer. My internal version uses a small DecodeJsString() method to decode Javascript without the overhead of a full JSON parser. It's obviously not rocket science but as mentioned above what's nice about it is that it works without an Google API key. I can't vouch on how many translates you can do before there are cut offs but in my limited testing running a few stress tests on a Web server under load I didn't run into any problems. Limitations There are some restrictions with this: It only works on single words or single sentences - multiple sentences (delimited by .) are cut off at the ".". There is also a length limitation which appears to happen at around 220 characters or so. While that may not sound  like much for typical word or phrase translations this this is plenty of length. Use with a grain of salt - Google seems to be trying to limit their exposure to usage of the Translate APIs so this code might break in the future, but for now at least it works. FWIW, I also found that Google's translation is not as good as Babelfish, especially for contextual content like sentences. Google is faster, but Babelfish tends to give better translations. This is why in my translation tool I show both Google and Babelfish values retrieved. You can check out the code for this in the West Wind West Wind Web Toolkit's TranslationService.cs file which contains both the Google and Babelfish translation code pieces. Ironically the Babelfish code has been working forever using screen scraping and continues to work just fine today. I think it's a good idea to have multiple translation providers in case one is down or changes its format, hence the dual display in my translation form above. I hope this has been helpful to some of you - I've actually had many small uses for this code in a number of applications and it's sweet to have a simple routine that performs these operations for me easily. Resources Live Localization Sample Localization Resource Provider Administration form that includes options to translate text using Google and Babelfish interactively. TranslationService.cs The full source code in the West Wind West Wind Web Toolkit's Globalization library that contains the translation code. © Rick Strahl, West Wind Technologies, 2005-2011Posted in CSharp  HTTP   Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Adopting DBVCS

  - by Wes McClure

  Identify early adopters Pick a small project with a small(ish) team.  This can be a legacy application or a green-field application. Strive to find a team of early adopters that will be eager to try something new. Get the team on board! Research Research the tool(s) that you want to use.  Some tools provide all of the features you would need while some only provide a slice of the pie.  DBVCS requires the ability to manage a set of change scripts that update a database from one version to the next.  Ideally a tool can track database versions and automatically apply updates.  The change script generation process can be manual, but having diff tools available to automatically generate it can really reduce the overhead to adoption.  Finally, an automated tool to generate a script file per database object is an added bonus as your version control system can quickly identify what was changed in a commit (add/del/modify), just like with code changes. Don’t settle on just one tool, identify several.  Then work with the team to evaluate the tools.  Have the team do some tests of the following scenarios with each tool: Baseline an existing database: can the migration tool work with legacy databases?  Caution: most migration platforms do not support baselines or have poor support, especially the fad of fluent APIs. Add/drop tables Add/drop procedures/functions/views Alter tables (rename columns, add columns, remove columns) Massage data – migrations sometimes involve changing data types that cannot be implicitly casted and require you to decide how the data is explicitly cast to the new type.  This is a requirement for a migrations platform.  Think about a case where you might want to combine fields, or move a field from one table to another, you wouldn’t want to lose the data. Run the tool via the command line.  If you cannot automate the tool in Continuous Integration what is the point? Create a copy of a database on demand. Backup/restore databases locally. Let the team give feedback and decide together, what tool they would like to try out. My recommendation at this point would be to include TSqlMigrations and RoundHouse as SQL based migration platforms.  In general I would recommend staying away from the fluent platforms as they often lack baseline capabilities and add overhead to learn a new API when SQL is already a very well known DSL.  Code migrations often get messy with procedures/views/functions as these have to be created with SQL and aren’t cross platform anyways.  IMO stick to SQL based migrations. Reconciling Production If your project is a legacy application, you will need to reconcile the current state of production with your development databases.  Find changes in production and bring them down to development, even if they are old and need to be removed.  Once complete, produce a baseline of either dev or prod as they are now in sync.  Commit this to your VCS of choice. Add whatever schema changes tracking mechanism your tool requires to your development database.  This often requires adding a table to track the schema version of that database.  Your tool should support doing this for you.  You can add this table to production when you do your next release. Script out any changes currently in dev.  Remove production artifacts that you brought down during reconciliation.  Add change scripts for any outstanding changes in dev since the last production release.  Commit these to your repository.   Say No to Shared Dev DBs Simply put, you wouldn’t dream of sharing a code checkout, why would you share a development database?  If you have a shared dev database, back it up, distribute the backups and take the shared version offline (including the dev db server once all projects are using DB VCS).  Doing DB VCS with a shared database is bound to cause problems as people won’t be able to easily script out their own changes from those that others are working on.   First prod release Copy prod to your beta/testing environment.  Add the schema changes table (or mechanism) and do a test run of your changes.  If successful you can schedule this to be run on production.   Evaluation After your first release, evaluate the pain points of the process.  Try to find tools or modifications to existing tools to help fix them.  Don’t leave stones unturned, iteratively evolve your tools and practices to make the process as seamless as possible.  This is why I suggest open source alternatives.  Nothing is set in stone, a good example was adding transactional support to TSqlMigrations.  We ran into situations where an update would break a database, so I added a feature to do transactional updates and rollback on errors!  Another good example is generating change scripts.  We have been manually making these for months now.  I found an open source project called Open DB Diff and integrated this with TSqlMigrations.  These were things we just accepted at the time when we began adopting our tool set.  Once we became comfortable with the base functionality, it was time to start automating more of the process.  Just like anything else with development, never be afraid to try to find tools to make your job easier!   Enjoy -Wes

  Read the article

• Use Advanced Font Ligatures in Office 2010

  - by Matthew Guay

  Fonts can help your documents stand out and be easier to read, and Office 2010 helps you take your fonts even further with support for OpenType ligatures, stylistic sets, and more.  Here’s a quick look at these new font features in Office 2010. Introduction Starting with Windows 7, Microsoft has made an effort to support more advanced font features across their products.  Windows 7 includes support for advanced OpenType font features and laid the groundwork for advanced font support in programs with the new DirectWrite subsystem.  It also includes the new font Gabriola, which includes an incredible number of beautiful stylistic sets and ligatures. Now, with the upcoming release of Office 2010, Microsoft is bringing advanced typographical features to the Office programs we love.  This includes support for OpenType ligatures, stylistic sets, number forms, contextual alternative characters, and more.  These new features are available in Word, Outlook, and Publisher 2010, and work the same on Windows XP, Vista and Windows 7. Please note that Windows does include several OpenType fonts that include these advanced features.  Calibri, Cambria, Constantia, and Corbel all include multiple number forms, while Consolas, Palatino Linotype, and Gabriola (Windows 7 only) include all the OpenType features.  And, of course, these new features will work great with any other OpenType fonts you have that contain advanced ligatures, stylistic sets, and number forms. Using advanced typography in Word To use the new font features, open a new document, select an OpenType font, and enter some text.  Here we have Word 2010 in Windows 7 with some random text in the Gabriola font.  Click the arrow on the bottom of the Font section of the ribbon to open the font properties. Alternately, select the text and click Font. Now, click on the Advanced tab to see the OpenType features. You can change the ligatures setting… Choose Proportional or Tabular number spacing… And even select Lining or Old-style number forms. Here’s a comparison of Lining and Old-style number forms in Word 2010 with the Calibri font. Finally, you can choose various Stylistic sets for your font.  The dialog always shows 20 styles, whether or not your font includes that many.  Most include only 1 or 2; Gabriola includes 6. Here’s lorem ipsum text, using the Gabriola font with Stylistic set 6. Impressive, huh?  The font ligatures change based on context, so they will automatically change as you are typing.  Watch the transition as we typed the word Microsoft in Word with Gabriola stylistic set 6. Here’s another example, showing the fi and tt ligatures in Calibri. These effects work great in Word 2010 in XP, too. And, since Outlook uses Word as it’s editing engine, you can use the same options in Outlook 2010.  Note that these font effects may not show up the same if the recipient’s email client doesn’t support advanced OpenType typography.  It will, of course, display perfectly if the recipient is using Outlook 2010. Using advanced typography in Publisher 2010 Publisher 2010 includes the same advanced font features.  This is especially nice for those using Publisher for professional layout and design.  Simply insert a text box, enter some text, select it, and click the arrow on the bottom of the font box as in Word to open the font properties. This font options dialog is actually more advanced than Word’s font options.  You can preview your font changes on sample text right in the properties box.  You can also choose to add or remove a swash from your characters.   Conclusion Advanced typographical effects are a welcome addition to Word and Publisher 2010, and they are very impressive when coupled with modern fonts such as Gabriola.  From designing elegant headers to using old-style numbers, these features are very useful and fun. Do you have a favorite OpenType font that includes advanced typographical features?  Let us know in the comments! More Reading Advances in typography in Windows 7 – Engineering 7 Blog New features in Microsoft Word 2010 Similar Articles Productive Geek Tips Change the Default Font in Excel 2007Ask the Readers: Do You Use a Laptop, Desktop, or Both?Keep Websites From Using Tiny Fonts in SafariAdd or Remove Apps from the Microsoft Office 2007 or 2010 SuiteFriday Fun: Desktop Tower Defense Pro TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users

  Read the article

• Cryptographic Validation Explained

  - by MarkPearl

  We have been using LogicNP’s CryptoLicensing for some of our software and I was battling to understand how exactly the whole process worked. I was sent the following document which really helped explain it – so if you ever use the same tool it is well worth a read. Licensing Basics LogicNP CryptoLicensing For .Net is the most advanced and state-of-the art licensing and copy protection system you can use for your software. LogicNP CryptoLicensing System uses the latest cryptographic technology to generate and validate licenses. The cryptographic algorithm used is the RSA algorithm which consists of a pair of keys called as the generation key and the validation key. Data encrypted using the generation key can only be decrypted using the corresponding validation key. How does cryptographic validation work? When a new license project is created, a unique validation-generation key pair is created for the project. When LogicNP CryptoLicensing For .Net generates licenses, it encrypts the license settings using the generation key. The validation key can be safely distributed with your software and is used during validation. During license validation, LogicNP CryptoLicensing For .Net attempts to decrypt the encrypted license code using the validation key. If the decryption is successful, this means that the data was encrypted using the generation key, since only the corresponding validation key can decrypt data encrypted with the generation key. This further means that not only is the license valid but that it was generated by you and only you since nobody else has access to the generation key. Generation Key This key is used by CryptoLicensing Generator to generate encrypted license codes. This key is stored in the license project file, so the license project file must be kept secure and confidential and must be accorded the same care as any other critical asset such as source code. Validation Key This key is used for validating generated license codes. It is the same key displayed in the 'Get Validation Key And Code' dialog (Ctrl+K) and is used by your software when validating license codes (using LogicNP.CryptoLicensing.dll). Unlike the generation key, it is not necessary to keep this key secure and confidential. Note that the generation key pair is stored in the project file created by LogicNP CryptoLicensing For .Net, so it is very important to backup this file and to keep it secure. Once the file is lost, it is not possible to retrieve the key pair. FAQ Do I use the same validation key to validate all license codes? Yes, the validation key (and generation key) for the project remains the same; you use the same key to validate all license codes generated using the project. You can retrieve the validation key using the "Project" menu --> "Get Validation Key & Code" menu item. Can license codes generated using generation key from one project be validated using validation key of another project? No! Q. Is every generated license code unique? A. Yes, every license code generated by CryptoLicensing is guaranteed to be unique, even if you generate thousands of codes at a time. Q. What makes CryptoLicensing so secure? A. CryptoLicensing uses the latest cryptographic technology to generate and validate licenses. The cryptographic algorithm used is the RSA asymmetric key algorithm which can use upto 3072-bit keys. Given current computing power, it takes years to break a 3072-bit key. Q. Is is possible for a hacker to develop a keygen for my software? A. Impossible. The cryptographic algorithm used by CryptoLicensing consists of a pair of keys called as the generation key and the validation key. Data encrypted with one key can only be decrypted by the other key and vice versa. Licenses are generated using the generation key and validated using the validation key. Without the generation key, it is impossible to generate valid licenses. Q. What is the difference between validation key and generation key? Generation Key This key is used by CryptoLicensing Generator to generate encrypted license codes. This key is stored in the license project file, so the license project file must be kept secure and confidential and must be accorded the same care as any other critical asset such as source code. Validation Key This key is used for validating generated license codes. It is the same key displayed in the 'Get Validation Key And Code' dialog (Ctrl+K) and is used by your software when validating license codes (using LogicNP.CryptoLicensing.dll). Unlike the generation key, it is not necessary to keep this key secure and confidential. Q. Do I have to include the license project file (.licproj) with my software? A. No!!! This goes against the very essence of the security of the asymmetric cryptographic scheme because the project file contains both the validation and generation key. With your software, you only need to include the validation key which will be used to validate licenses generated by CryptoLicensing using the generation key. The license project file should be treated as any other valuable and confidential asset such as your source code. Q. Does the license service need the license project file? A. Yes. The license project file is needed whenever new licenses are generated (via the UI, via the API or via the license service). As just one example, the license service generates new machine-locked licenses when activated licenses are presented to it for activation, therefore the license service needs the license project file. Q. Is it possible to embed my own data in the generated licenses? A. Yes. You can embed any amount of additional data in the licenses. This data will have the same amount of security as the license code itself and will be tamper-proof. The embedded user data can be retrieved from your software. Q. What additional steps can I take to ensure that my software does not get cracked? A. There are many methods and techniques which can make it extremely difficult for a hacker to crack your software. See Writing Effective License Checking Code And Designing Effective Licenses for more information. Q. Why is the license service not working? A. The most common cause is not setting the CryptoLicense.LicenseServiceURL property before trying to validate a license. Make sure that this property is set to the correct URL where your license service is hosted. The most common cause after this is that the license project file on the web server where your license service is hosted is not the latest. This happens if you make changes to the license project (for example, set the 'Enable With Serials' setting for a profile), but don't upload the updated project file to your web server. Q. Why are my serials not working? Serial codes require the user of a license service. See Using Serial Codes for more details. Also see the earlier question 'Why is the license service not working?' Q. Is the same validation key used to validate license codes generated from different profiles. A. Yes. Profiles are just pre specified license settings for quickly generating licenses having those settings. The actual license code is still generated using the license project's cryptographic generation key and thus, can be validated using the project's validation key. Q. Why are changes made to a profile not getting saved? A. Simply changing license settings via UI and saving the license project does not save those license settings to the active profile. You must first save the license settings to a profile using the Save/Save As command from the Profiles menu (see above). Q. Why is validation of activated licenses failing from CryptoLicensing Generator, but works from my software? A. Make sure that you have specified the URL of the license service using the Project Properties Dialog. Also see the earlier question 'Why is the license service not working?' Q. How can I extend the trial period of my customer? A. To extend the evaluation period of the customer, simply send him a new license code specifying the desired evaluation limits. Evaluation information such as the current used days, executions, etc are stored in garbled form in a registry location which is derived from the license code. Therefore, when a new license code is used, the old evaluation information will not be used and a new evaluation period will be started.

  Read the article

• Emails forwarded via postfix get flagged as spam and forged in Gmail

  - by Kendall Hopkins

  I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

  Read the article

• Create Chemistry Equations and Diagrams in Word

  - by Matthew Guay

  Microsoft Word is a great tool for formatting text, but what if you want to insert a chemistry formula or diagram?  Thanks to a new free add-in for Word, you can now insert high-quality chemistry formulas and diagrams directly from the Ribbon in Word. Microsoft’s new Education Labs has recently released the new Chemistry Add-in for Word 2007 and 2010.  This free download adds support for entering and editing chemistry symbols, diagrams, and formulas using the standard XML based Chemical Markup Language.  You can convert any chemical name, such as benzene, or formula, such as H2O, into a chemical diagram, standard name, or formula.  Whether you’re a professional chemist, just taking chemistry in school, or simply curious about the makeup of Citric Acid, this add-in is an exciting way to bring chemistry to your computer. This add-in works great on Word 2007 and 2010, including the 64 bit version of Word 2010.  Please note that the current version is still in beta, so only run it if you are comfortable running beta products. Getting Started Download the Chemistry add-in from Microsoft Education Labs (link below), and unzip the file.  Then, run the ChemistryAddinforWordBeta2.Setup.msi. It may inform you that you need to install the Visual Studio Tools for Office 3.0.  Simply click Yes to download these tools. This will open the download in your default browser.  Simply click run, or save and then run it when it is downloaded. Now, click next to install the Visual Studio Tools for Office as usual. When this is finished, run the ChemistryAddinforWordBeta2.Setup.msi again.  This time, you can easily install it with the default options. Once it’s finished installing, open Word to try out the Chemistry Add-in.  You will be asked if you want to install this customization, so click Install to enable it. Now you will have a new Chemistry tab in your Word ribbon.  Here’s the ribbon in Word 2010… And here it is in Word 2007.   Using the Chemistry Add-in It’s very easy to insert nice chemistry diagrams and formulas in Word with the Chemistry add-in.  You can quickly insert a premade diagram from the Chemistry Gallery: Or you can insert a formula from file.  Simply click “From File” and choose any Chemical Markup Language (.cml) formatted file to insert the chemical formula. You can also convert any chemical name to it’s chemical form.  Simply select the word, right-click, select “Convert to Chemistry Zone” and then click on its name. Now you can see the chemical form in the sidebar if you click the Chemistry Navigator button, and can choose to insert the diagram into the document.  Some chemicals will automatically convert to the diagram in the document, while others simply link to it in the sidebar.  Either way, you can display exactly what you want. You can also convert a chemical formula directly to it’s chemical diagram.  Here we entered H2O and converted it to Chemistry Zone: This directly converted it to the diagram directly in the document. You can click the Edit button on the top, and from there choose to either edit the 2D model of the chemical, or edit the labels. When you click Edit Labels, you may be asked which form you wish to display.  Here’s the options for potassium permanganate: You can then edit the names and formulas, and add or remove any you wish. If you choose to edit the chemical in 2D, you can even edit the individual atoms and change the chemical you’re diagramming.  This 2D editor has a lot of options, so you can get your chemical diagram to look just like you want. And, if you need any help or want to learn more about the Chemistry add-in and its features, simply click the help button in the Chemistry Ribbon.  This will open a Word document containing examples and explanations which can be helpful in mastering all the features of this add-in. All of this works perfectly, whether you’re running it in Word 2007 or 2010, 32 or 64 bit editions. Conclusion Whether you’re using chemistry formulas everyday or simply want to investigate a chemical makeup occasionally, this is a great way to do it with tools you already have on your computer.  It will also help make homework a bit easier if you’re struggling with it in high school or college. Links Download the Chemistry Add-in for Word Introducing Chemistry Add-in for Word – MSDN blogs Chemistry Markup Language – Wikipedia Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioEasily Summarize A Word 2007 DocumentCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsHow To Create and Publish Blog Posts in Word 2010 & 2007Using Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

  Read the article

• Issuing Current Time Increments in StreamInsight (A Practical Example)

  The issuing of a Current Time Increment, Cti, in StreamInsight is very definitely one of the most important concepts to learn if you want your Streams to be responsive. A full discussion of how to issue Ctis is beyond the scope of this article but a very good explanation in addition to Books Online can be found in these three articles by a member of the StreamInsight team at Microsoft, Ciprian Gerea. Time in StreamInsight Series http://blogs.msdn.com/b/streaminsight/archive/2010/07/23/time-in-streaminsight-i.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/07/30/time-in-streaminsight-ii.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/08/03/time-in-streaminsight-iii.aspx A lot of the problems I see with unresponsive or stuck streams on the MSDN Forums are to do with how Ctis are enqueued or in a lot of cases not enqueued. If you enqueue events and never enqueue a Cti then StreamInsight will be perfectly happy. You, on the other hand, will never see data on the output as you have not told StreamInsight to flush the stream. This article deals with a specific implementation problem I had recently whilst working on a StreamInsight project. I look at some possible options and discuss why they would not work before showing the way I solved the problem. The stream of data I was dealing with on this project was very bursty that is to say when events were flowing they came through very quickly and in large numbers (1000 events/sec), but when the stream calmed down it could be a few seconds between each event. When enqueuing events into the StreamInsight engne it is best practice to do so with a StartTime that is given to you by the system producing the event . StreamInsight processes events and it doesn't matter whether those events are being pushed into the engine by a source system or the events are being read from something like a flat file in a directory somewhere. You can apply the same logic and temporal algebra to both situations. Reading from a file is an excellent example of where the time of the event on the source itself is very important. We could be reading that file a long time after it was written. Being able to read the StartTime from the events allows us to define windows that will hold the correct sets of events. I was able to do this with my stream but this is where my problems started. Below is a very simple script to create a SQL Server table and populate it with sample data that will show exactly the problem I had. CREATE TABLE [dbo].[t] ( [c1] [int] PRIMARY KEY, [c2] [datetime] NULL ) INSERT t VALUES (1,'20100810'),(2,'20100810'),(3,'20100810') Column c2 defines the StartTime of the event on the source and as you can see the values in all 3 rows of data is the same. If we read Ciprian’s articles we know that we can define how Ctis get injected into the stream in 3 different places The Stream Definition The Input Factory The Input Adapter I personally have always been a fan of enqueing Ctis through the factory. Below is code typical of what I would use to do this On the class itself I do some inheriting public class SimpleInputFactory : ITypedInputAdapterFactory<SimpleInputConfig>, ITypedDeclareAdvanceTimeProperties<SimpleInputConfig> And then I implement the following function public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.FromTicks(-1)), AdvanceTimePolicy.Adjust); } The configInfo .CtiFrequency property is a value I pass through to define after how many events I want a Cti to be injected and this in turn will flush through the stream of data. I usually pass a value of 1 for this setting. The second parameter determines the CTI timestamp in terms of a delay relative to the events. -1 ticks in the past results in 1 tick in the future, i.e., ahead of the event. The problem with this method though is that if consecutive events have the same StartTime then only one of those events will be enqueued. In this example I use the following to define how I assign the StartTime of my events currEvent.StartTime = (DateTimeOffset)dt.c2; If I go ahead and run my StreamInsight process with this configuration i can see on the output adapter that two events have been removed To see this in a little more depth I can use the StreamInsight Debugger and see what happens internally. What is happening here is that the first event arrives and a Cti is injected with a time of 1 tick after the StartTime of that event (Also the EndTime of the event). The second event arrives and it has a StartTime of before the Cti and even though we specified AdvanceTimePolicy.Adjust on the factory we know that a point event can never be adjusted like this and the event is dropped. The same happens for the third event as well (The second and third events get trumped by the Cti). For a more detailed discussion of why this happens look here http://www.sqlis.com/sqlis/post/AdvanceTimePolicy-and-Point-Event-Streams-In-StreamInsight.aspx We end up with a single event being pushed into the output adapter and our result now makes sense. The next way I tried to solve this problem by changing the value of the second parameter to TimeSpan.Zero Here is how my factory code now looks public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.Zero), AdvanceTimePolicy.Adjust); } What I am doing here is declaring a policy that says inject a Cti together with every event and stamp it with a StartTime that is equal to the start time of the event itself (TimeSpan.Zero). This method has plus points as well as a downside. The upside is that no events will be lost by having the same StartTime as previous events. The Downside is that because the Cti is declared with the StartTime of the event itself then it does not actually flush that particular event because in the StreamInsight algebra, a Cti commits only those events that occurred strictly before them. To flush the events we need a Cti to be enqueued with a greater StartTime than the events themselves. Here is what happened when I ran this configuration As you can see all we got through was the Cti and none of the events. The debugger output shows the stamps on the Cti and the events themselves. Because the Cti issued has the same timestamp (StartTime) as the events then none of the events get flushed. I was nearly there but not quite. Because my stream was bursty it was possible that the next event would not come along for a few seconds and this was far too long for an event to be enqueued and not be flushed to the output adapter. I needed another solution. Two possible solutions crossed my mind although only one of them made sense when I explored it some more. Where multiple events have the same StartTime I could add 1 tick to the first event, two to the second, three to third etc thereby giving them unique StartTime values. Add a timer to manually inject Ctis The problem with the first implementation is that I would be giving the events a new StartTime. This would cause me the following problems If I want to define windows over the stream then some events may not be captured in the right windows and therefore any calculations on those windows I did would be wrong What would happen if we had 10,000 events with the same StartTime? I would enqueue them with StartTime + n ticks. Along comes a genuine event with a StartTime of the very first event + 1 tick. It is now too far in the past as far as my stream is concerned and it would be dropped. Not what I would want to do at all. I decided then to look at the Timer based solution I created a timer on my input adapter that elapsed every 200ms. private Timer tmr; public SimpleInputAdapter(SimpleInputConfig configInfo) { ctx = new SimpleTimeExtractDataContext(configInfo.ConnectionString); this.configInfo = configInfo; tmr = new Timer(200); tmr.Elapsed += new ElapsedEventHandler(t_Elapsed); tmr.Enabled = true; } void t_Elapsed(object sender, ElapsedEventArgs e) { ts = DateTime.Now - dtCtiIssued; if (ts.TotalMilliseconds >= 200 && TimerIssuedCti == false) { EnqueueCtiEvent(System.DateTime.Now.AddTicks(-100)); TimerIssuedCti = true; } }   In the t_Elapsed event handler I find out the difference in time between now and when the last event was processed (dtCtiIssued). I then check to see if that is greater than or equal to 200ms and if the last issuing of a Cti was done by the timer or by a genuine event (TimerIssuedCti). If I didn’t do this check then I would enqueue a Cti every time the timer elapsed which is not something I wanted. If the difference between the two times is greater than or equal to 500ms and the last event enqueued was by a real event then I issue a Cti through the timer to flush the event Queue, otherwise I do nothing. When I enqueue the Ctis into my stream in my ProduceEvents method I also set the values of dtCtiIssued and TimerIssuedCti   currEvent = CreateInsertEvent(); currEvent.StartTime = (DateTimeOffset)dt.c2; TimerIssuedCti = false; dtCtiIssued = currEvent.StartTime; If I go ahead and run this configuration I see the following in my output. As we can see the first Cti gets enqueued as before but then another is enqueued by the timer and because this has a later timestamp it flushes the enqueued events through the engine. Conclusion Hopefully this has shown how the enqueuing of Ctis can have a dramatic effect on the responsiveness of your output in StreamInsight. Understanding the temporal nature of the product is for me one of the most important things you can learn. I have attached my solution for the demos. It is all in one project and testing each variation is a simple matter of commenting and un-commenting the parts in the code we have been dealing with here.

  Read the article

• How to Get All the Windows 8 Editions on One Install Disk

  - by Taylor Gibb

  There are a lot of different versions of Windows, but you probably didn’t know that short of the Enterprise edition, the disc or image that you own contains all versions for that architecture. Read on to see how we can use them to make a universal Windows 8 install disc. Things You Will Need A x86 Version of Windows 8 A x64 Version of Windows 8 A x86 Version of Windows 8 Enterprise A x64 Version of Windows 8 Enterprise A Windows 8 PC Note: While we will use all the images above you don’t really need the Enterprise Edition. You could always leave out parts of the tutorial if you know what you are doing, if you are not comfortable with that and still want to follow through you could always grab the Enterprise evaluation images that are available for free to the public, on MSDN. Getting Started To get started you will need to Download the Windows 8 ADK from Microsoft. Once downloaded go ahead and install it, you will only need the Deployment tools so be sure to uncheck the rest of the options. Lastly you will also need to create the following folder structure on the root of your C:\ drive to make things a bit easier. C:\Windows8Root C:\Windows8Root\x86 C:\Windows8Root\x64 C:\Windows8Root\Enterprisex86 C:\Windows8Root\Enterprisex64 C:\Windows8Root\Temp C:\Windows8Root\Final OK lets get started. Making The Image The first thing we need to do is create a base image, so mount the x86 version of Windows 8 and copy its files to: C:\Windows8Root\Final Now move the install.wim file from: C:\Windows8Root\Final\sources To: C:\Windows8Root\x86 Next go ahead and copy the install.wim file from the other 3 images, Windows 8 x64, Windows 8 Enterprise x86 and Windows 8 Enterprise x64 to the respective folders in Windows8Root, the install.wim file can be located at: D:\sources\install.wim Note: The above assumes that the images are always mounted at drive D. Remember that each install.wim is different so don’t copy them to the wrong directories or the rest of the tutorial wont work. Next switch to the Metro Start Screen and open the Deployment and Imaging Tools Environment. Note: If you are not a local administrator on your PC, you will need to right-click on it and choose to run it as an administrator. Now run the following commands: Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Next navigate to: C:\Windows8Root\sources\ And create a new text file. You will need to call it: EI.cfg Then edit it to look like the following: The last thing we need to do is work some magic to get Windows Media Center added to the WMC editions of Windows 8. For that I have written a little script to make it easier for everybody, you can grab it here. Once you have downloaded it extract it. In order to use it right-click in the bottom left hand corner of the screen, and open an elevated command prompt. Then go ahead and paste the following into the command prompt window. powershell.exe -ExecutionPolicy Unrestricted -File C:\Users\Taylor\Documents\HTGWindows8Converter.ps1 Note: You will need to replace the path to the script, another thing to note is that if the path you replace it with has spaces you will need to enclose the path in quotes. The script should kick off straight away and has some progress bars you can watch while it does its thing. Half way through another Window will pop open, which will start creating your final ISO image. When its complete, close the command prompt and you should have an ISO image on the root of your C drive called: HTGWindows8.iso That’s all there is to it. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• SOA Suite Integration: Part 2: A basic BPEL process

  - by Anthony Shorten

  This is the next in the series about SOA Suite integration with Oracle Utilities Application Framework. One of the first scenarios I am going to illustrate in this series is building a basic BPEL process using Web Service calls to the Oracle Utilities Application Framework. The scenario is this. I will pass in the userid and the BPEL process will call our the AS-User Web Service we created in Part 1. This is just a basic test and illustrate how to import the Web Service into SOA Suite. To use this scenario, you will need access to Oracle SOA Suite, access to a copy of any Oracle Utilities Application Framework based product and Oracle JDeveloper (to build the process). First of all you need to start Oracle JDeveloper and create a new SOA Project to house the BPEL process in. For the purposes of this example I will call the project simpleBPEL and verify that SOA is part of the project. I will select "Composite with BPEL" to denote it as a BPEL process. I can also the same process to create a Mediator or OSB project (refer to the JDeveloper documentation on these technologies). For this example I will use BPEL 1.1 as my specification standard (BPEL 2.0 can also be used if desired). I give the individual BPEL process as simpleBPEL (you can use a different name but I wanted to keep the project and process the same for this example). I will also build a Synchronous BPEL Process as I want a response from the Web Service. I will leave the defaults to save time. I have no have a blank canvas to build my BPEL process against. Note: for simplicity I am going to use as much defaulting as possible. In fact I am not going to specify an input schema for the incoming call as I will use the basic single field used by BPEL as default. The first step is to import the AS-User Web Service into my BPEL project. To do this I use the standard Web Service BPEL component from the Component Palette to import the WSDL into the BPEL project. Now the tricky part (a joke), you drag and drop the component from the Palette onto the right side of the canvas in the Partner Links swim lane. This swim lane is reserved for Partner Links that have a Partner Role (i.e. being called rather than calling). When you drop the Web Service onto the canvas the Create Web Service wizard is invoked to ask for details of the Web Service. At this point you give the BPEL node a name. I have used the name RetrieveUser as a name. I placed the WSDL URL from the XAI Inbound Service screen in the WSDL URL. Once you specify the URL you can press the Find existing WSDL's button to load the information into BPEL from the call. You will notice the Port Type is prefilled with the port from the WSDL. I also suggest that you check copy wsdl and it's dependent artifacts into the project if you intending to work on the BPEL process offline. If you do not check this your target application must be accessible when you work on the BPEL process (that is not always convenient). Note: For the perceptive of you will notice that the URL specified in this example is different to the URL in the last post. The reason is for the demonstrations I shifted to a new server and did not redo all of the past screen captures. If you copy the WSDL into the project you will get an information screen about Localize Files. It is just a confirmation screen. The last confirmation screen is a summary of the partner link (the main tab is locked for editing at this stage). At this stage you have successfully imported the Web Service. To complete the setup of the Web Service you need to set the credentials for the Web Service to use. Refer to the past post on how to do that. Now to use the Web Service. To call the Web Service (as it is just imported not connected to the BPEL process yet), you must add an Invoke action to your BPEL Process. To do this, select Invoke action from the BPEL Constructs zone on the Component Palette and drop it on the edit nodes between the receiveInput and replyOutput nodes This will create an empty Invoke action. You will notice some connectors on the Invoke node. Grab the node closest to your Web Service and drag it to connect the Invoke to your Web Service. This instructs BPEL to use the Invoke to call the Web Service. Once the Invoke action is connected to the Web Service an Edit Invoke edit dialog is displayed. At this point I suggest you name the Invoke node. It is important to name the nodes straightaway and name them appropriately for you to trace the logic. I used InvokeUser as the name in this example. To complete the node configuration you must create Variables to hold the input and output for the call. To do this clock on Automatically Create Input Variable on the Edit Invoke dialog. You will be presented with a default variable name. It uses the node name (that is why it is important to name the node before hitting this button) as a prefix. You can name the variable anything but I usually take the default. Repeat the same for the output variable. You now have a completed node for invoking the service. You have a very basic BPEL process which contains an input, invoke and output node. It is not complete yet though. You need to tell the BPEL process how to pass data from the input to the invoke step and how to take the output from the service call and pass it back to the service. You need to now add an Assign node to assign the input to the Web Service. To do this select Assign activity from BPEL Constructs zone in the Component Palette. Drag and drop the Assign activity between the receiveInput and InvokeUser nodes as you want to pass data between these two nodes. You have now added a new Assign node to your BPEL process Double clicking the node allows you to specify the name of the node. I use AssignUser to describe that I am assigning user data. On the Copy Rules tab you can specify the mapping between the input variable InputVariable/payload/process/input string and the input variable for the Web Service call. We are passing data from the input to BPEL to the relevant input variable on the Web Service. This is simply drag and drop between the two data structures. In the example, I am using the input to pass to the user element in my Web Service as the user is the primary key for the object. The fields become linked (which means data from source will be copied to target). Almost there. You now need to process the output from the Web Service call to the outputVariable of the client call. I have decided to pass back one piece of data, the name associated with the user by concatenating the firstName and lastName elements from the Web Service call. To do this I will use a Transform as it is not just a matter of an Assign action. It is a concatenation operation. This also illustrates how you can use BPEL functionality to transform data from a Web Service call. As with the other components you drag and drop the Transform component to the appropriate place in the BPEL process. In this case we want to transform the output from the Web Service call so we want it after the InvokeUser action and the replyOutput action. The Transform component is actually part of the Oracle Extensions to the BPEL specification. Double clicking the Transform node will allow you to name the node.  In this example I used TransformName. To complete the transform I need to tell the product the source of the transformation and the target of the transform. In the example this is the InvokeUser output variable. I also named the mapper file to TransformName. By clicking the + or pencil icon next to the map I can create the map. The mapping screen is shows the source and target schemas for me to map across. As with the assign I can map the relevant elements. In my example, I first map the firstName from the Web Service to the result element. As I want to concatenate the names, I drop the concat function on the call line. I now attach the last name to the function to indicate the concatenation of the field. By default the names will be concatenated with no space. To make the name legible I add a space between the field by clicking the function and adding a space in the call. I now have a completed mapping. I can now save the whole project as my BPEL process is now complete. As you can see the following happens: We accept input from the client (the userid for the call) in the receiveInput step. We assign that value to the input parameters for the Web Service call in the AssignUser step. We invoke the Web Service call to retrieve the data from the product in the InvokeUser step. We take the output from the InvokeUser step and concatenate the names in the TransformName step. We pass back the data in the replyOutput step. At this point we can deploy the BPEL process to the SOA Suite server. I will not cover this aspect as it really all SOA Suite specific (it is all done via Oracle JDeveloper). Now we need to test the service in SOA Suite. We will use the Fusion Middleware Control test facility. I will assume that credentials have also been setup as per our previous post (else you will get a 401 error). You navigate to the deployed BPEL process within Fusion Middleware Control and select the Test Service option. Specify some test data on the payload at the bottom of the Test Service screen. In my case I am returning my own userid information. On the response tab you will see the result. It works. You can verify the steps using the Audit trace facility on individual calls. As you can see this is a basic BPEL but you get the idea of importing the Web Service is pretty straightforward. You can create more sophisticated BPEL processes using the full facilities in Oracle SOA Suite. I just showed you the basic principals.

  Read the article

• Backup options in SharePoint 2007

  - by sreejukg

  It is very important to make sure the server farm backup is taking properly, making sure that in case of any disaster, the administrator has the latest backup that can be used to restore. This articles addresses some of the options available for backup/restore in SharePoint 2007 Backup There are two options that can be utilized to take backup of SharePoint sites. Using SharePoint Central Administration website Using SharePoint central administration website, you can do backup/restore from user interface. Using central administration website you can back up the following · Server farm · Web application · Content databases Follow these steps to take backup of the server farm using central administration 1. Open Central administration website 2. Navigate to Operations -> Backup and Restore -> Perform a backup 3. Here you will have options to choose the item to back up. Select Farm (the top most item in the list) 4. Once you select the items to backup, click on “Continue to backup options” 5. Select “Full” as type of backup. 6. In the backup file location, enter the path where you need to store the backup. The path should be according to the UNC, for e.g. for c drive you may use \\server\c$\mybackupFolder 7. Click ok 8. Now you will be redirected to Backup and Restore Status page. This page shows the progress for the backup operation. You can use the refresh button to update the status of backup(this page will automatically refresh in every 30 seconds). Once completed you can find the files in the specified folder. Using STSADM website SharePoint comes with a STSADM command line tool. STSADM provides lot of administrative operations that can be performed on SharePoint 2007 sites. You can find STSADM command from the following location C:\Program Files\Common Files\Microsoft shared\web server extensions\12\bin (You may change the drive letter according to your installation) STSADM provides a method for performing the Office SharePoint Server 2007 administration tasks at the command line or by using batch files or scripts. STSADM provides access to operations not available by using the Central Administration site The general syntax for STSADM is as follows STSADM -operation Operation Name –parameter1 value1 –parameter2 value2 ……….. Using STSADM you can back up the following · Server farm · Web application · Content databases To perform any STSADM, operation you need to be a member of administrators group. Follow these steps to take backup of SharePoint server farm using STSADM tool. Note: make sure you are logged in to the computer where central administration website is installed. 1. Open the Command prompt (You should run command prompt with administrator privileges) 2. Change the working directory to C:\Program Files\Common Files\Microsoft shared\web server extensions\12\bin 3. Enter the command, then press enter Stsadm –o backup -directory <UNC path> -backupmethod full 4. You will get success / failure message once the command finishes. How to schedule the backup There is no option to schedule a backup using central administration site. Also there is no operation provided by STSADM to automate the backup. The farm administrators need to take backup in regular intervals. To achieve this, you can write a batch file that includes STSADM command to take full backup of the server. This batch file can be scheduled using windows task scheduler to execute in certain intervals. Sample of the batch file 1. Open notepad(or any other text editor) 2. Enter the following commands @echo off echo =============================================================== echo Back up the farm to <C:\backup> echo =============================================================== cd %COMMONPROGRAMFILES%\Microsoft Shared\web server extensions\12\BIN @echo off stsadm.exe -o backup -directory "<\backup>" -backupmethod full echo completed 3. Save the file with .bat extension You can schedule this batch file as you require. Other Options Using STSADM tool, you will be able to take backup for individual site collection. The syntax for this is stsadm -o backup -url <URL name for site collection> -filename <file name> [-overwrite] The explanations for the parameters are as follows. -url The url of the site collection you need to backup -filename The name of the backup file. E.g. c:\backup.bak -overwrite optional. Indicates if the filename specified exists, whether to overwrite or not. If you are creating the batch file for scheduling the backup for a site collection, you may need to specify the backup filename automatically created. It is an option that you can generate the filename with date so that you can keep backup for each day. e.g. The following commands can be utilized create a site collection backup. @echo off echo =============================================================== echo Back up the farm to <C:\backup> echo =============================================================== echo =============================================================== echo getting todays date to a variable echo =============================================================== @For /F "tokens=1,2,3 delims=/ " %%A in (‘Date /t’) do @( Set Day=%%A Set Month=%%B Set Year=%%C Set todayDate=%%C%%B%%A ) cd %COMMONPROGRAMFILES%\Microsoft Shared\web server extensions\12\BIN @echo off stsadm -o backup -url <sitecollection url> -filename \\ServerName\ShareName\Backup_%todayDate%.bak -overwrite echo completed To read more about backup STSADM operation, read this http://technet.microsoft.com/en-us/library/cc263441.aspx

  Read the article

< Previous Page | 568 569 570 571 572 573 574 575 576 577 578 579  | Next Page >