Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 575/778 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• How do I configure pfsense as an outbound VPN client?

  - by Avery Chan

  We use pfsense as a router/firewall. Because we're based in China, it is useful for us to have VPN access for all our internal clients. Instead of each individual client connecting to a VPN server stateside, I'd like to configure pfsense as a VPN client and have all the network traffic be routed through it. Most of the posts I've seen regarding pfsense and VPN are concerning connecting to the LAN from outside; this is not what I want to do. Another option would be for an SSH tunnel to be initiated on the pfsense box with the LAN traffic routed through it. How do I configure pfsense to be able to do either of these? One huge caveat is that OpenVPN cannot be used. The solution I am looking for needs to use one of the other VPN protocols.

  Read the article

• CodePlex Daily Summary for Sunday, June 08, 2014

  CodePlex Daily Summary for Sunday, June 08, 2014Popular ReleasesGFramework: GFramework V1.0: GFramework V1.0SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;MyBB: MyBB 1.6.13 Türkçe Kurulum Paketi: MyBB 1.6.13 - Resmi Tam Türkçe UTF-8 Sifir Kurulum Paketi Rar Pass - Sifresi: mybb.com.tr Yayinci site: http://www.mybb.com.tr Orjinal indirme adresi: http://download.mybb.com.tr Destek 1: http://destek.mybb.com.tr/showthread.php?tid=12326 Destek 2: http://tr.mybbdepo.com/mybb-1-6-13-turkce-sifir-kurulum-paketi-konusu.html Dosya: MyBB1613KurulumPaketiTR.rar MD5: d2745b79aa8cc5f8cc09e8a91b50d3cc SHA-1: 6fbb8e611e6d78f8cd3d88d7a773edc67ecc2a3e Ekleyen: XpSerkan MCTR TEAM - Gururla Sunar.SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.PlaySly: GetDirectLink 1.0.1.0: ConfiguraciónNuevo sistema de configuración Nuevo formulario de configuración Añadidas configuraciones visuales Fuente principal, fuente secundaria, fuente menus, fuente botones grandes, fuente botones pequeños Color fondo, color fondo menus, color fondo botones y colores de fuentes Ahora las fuentes soportan estilo (irregular, negrita, tachado y subrayado) Añadidas configuraciones de reproductor Pausar al iniciar para que el vídeo cargue (buffering) Añadidas configuraciones sobre...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...Media Player (Technology Area): Media Player 0.3 (Codname Kalo): Themes are included, along with a picture viewer. This does not require 0.2 to be installed51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Pong: Pong_v1.0: Folder Content + the exe file.MudRoom: Parser Test 0.01a: Binary build of proof of concept code that supports a few verbs and can act on a few objects. Shows the basics of compound verb actions, adjective support, and the ignoring of filler words.New Projects2112110162: 2112110162 nguyen do datASP.NET Identity 2.0 AWS DynamoDb: This project provides a high performance cloud solution for ASP.NET Identity 2.0 using AWS DynamoDb replacing the Entity Framework / MSSQL provider.Eye tracking | Accessibility version.: Este projeto tem o objetivo de oferecer de forma barata uma ferramenta para se comunicar com pessoas que só podem mexer os olhos.HCRM: House CRMhuynhtanphat1995: cfzxJJ94_HelloWorld: Hello World Hello World C++ Hello World Ckbvault-mysql: KBVault MySQL is a free knowledge base web application.Khue's project: helloNDataTable: Similar to the DataSet and DataTable Class. using XML to support cross platform data transmission. Suitable for network data transmission. Net Slate: An app that learns users interest and becomes smarter, by providing news according to your interest. NR comes with highly customizable User interface, with dynaPA kece: Edugra is one of android-based applicationPowerCLI Navigator: PowerCLI Navigator is a PowerShell host application meant to improve system administrators' experience with VMware PowerCLI and vSphere management automation.project1: sdczxproject1-kimquyendang: chuoiproject1-vannghia: jghjghjRandom Katas: Random Code Kata implementations in a variety of languages. For personal edification, but if others are interested, have at it.TestWeb: TestWebTimelapse Camera Archive: An ASP.NET web application that organizes, archives, and makes available photos from FTP-capable IP cameras.Ubnt Discovery: This tool allows you to discovery Ubiquiti devices in your network.Website Practice: The aim of this project is to learn team foundation service using codeplex on a website project.Z3_SMC: testzDocumentationHelper: Custom Documentation Helper

  Read the article

• Setting up Cluster Configuration using an existing web server as a Primary Node?

  - by RapidWebs

  Thanks in advance for any help which is issued! I am having a slight issue, and need help with the decision making process when it comes to setting up my Cluster Configuration, consisting on a line of Ubuntu Servers (12.04). We currently have a Primary node, which resides in the US within a Datacenter, but we are going to be using this for all serious bandwidth and resource intensive websites, and through a configuration of Virtualmin + Webmin, will be setup as a sort of pseudo-cluster, using Virtualmins Cluster Modules. Anyways, on to the issue: We also have a business line setup locally, with three servers. here are their specs: Intel P4 2.4 ghz, 1GB Ram, 110 gb sata, Ubuntu 12.04* AMD 1.3 ghz, 512MB Ram, 20 GB IDE P3 Xeon 800mhz (dual physical processors), 1GB Ram, 3 * 25 GB Raid Configuration (one in use for host operating system). The first machine is currently IN USE and is serving virtual hosts off a sub-domain. My question is this: How can I integrate the Secondary node (which will be the Primary node per say, in this smaller configuration...) which is currently in use, into the cluster configuration w/ the other two servers for: Sharing Resources Redundancy (HA?) NFS /w the two Raid Disks without having the FORMAT the secondary node, and start fresh moving all my services in to a DRBD network drive or something similar, and than restoring all active virtualmin's Virtual hosts. the idea is that I want minimal downtime to people currently being served from server2.mywebsite.com, and from what I understand, all services need to be on a NFS so that they can be mounted on demand and accessed from the other machine taking over (i.e. Heartbeat + DRBD Config.) but my issue is that i already have all these services installed to their default directory structure: how can i most easily setup this NFS and HA system, move all my desires services to this new drive, and do it with minimal down time, and without breaking Virtualmin and everything else on my server? even just some pointers, a thread i could read, or a step by step check list or run down of commands i could issue to get started would be great! thanks!

  Read the article

• FreeNas running on ESXi - sometimes gets very slugish.

  - by Luma

  Hello everyone, I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the throughput of this VM just dies, for example right now it can't even handle streaming a song and when I tried to transfer a folder the speed goes from 10-400KB/s. Might I add at this point that the ESXi box has dual gigabit network cards plugged into a good solid gigabit switch and other linux and windows VM's are just fine I have seen speeds over 90MB/s (frequently) The server still has ram left over (plenty actually) and cpu is very low (500-1000mhz) any ideas what could cause this? thanks. Luc

  Read the article

• Restore access to Cisco Connect after changing router settings

  - by StasM

  I have recently bought Cisco Valet Plus (M20) wireless router (which I recognize now was a mistake, but nevermind). It has two setup options - Cisco Connect software and web-based setup. Cisco Connect software allows changing very small set of settings, web-based setup allows access to almost all settings, except settings for guest network. The problem is that when I use web-based setup, Cisco Connect after some changes refuses to talk to the router, so I can't change guest settings anymore (since web interface doesn't allow to change them). It must be because of some config parameter not matching or some password set wrong - but I don't know where Cisco Connect stores them. So, does anybody have any idea how to make Cisco Connect talk to the router again once I changed the settings through the web interface?

  Read the article

• webm html5 videos lose connection with apache server

  - by Jizbo Jonez

  webm html5 videos that are played through a domain on my server sometimes lose connection. A video that is playing will start to buffer and then stop part of way through with that message "Video playback aborted due to a network error." displayed on the html5 video player. I am delivering the webm videos via a php script on an LAMP server. There doesn't seem to be any errors in the server logs. Is there any php.ini settings or httpd.conf that I need to set? I recently set 'Keep Alive" to "on" in httpd.conf could that be causing this?

  Read the article

• disable RADIUS for Cisco 2500 wireless controller

  - by Tim Vaughan

  I have a Cisco 2500 wireless controller and four lightweight access points. I want to use the controller to manage a wireless network secured by WPA only, without using RADIUS or anything else. We'll handle the authentication using a captive portal behind the access points. However, it seems like the controller's default security policy requires a RADIUS server and I can't find out how to switch the policy off. The documentation assumes I'm in an environment which needs heavy-duty security and the use case is actually a small charity/business with much less stringent security requirements. How do I disable the complicated security policy and instead run a simple one that just uses WPA?

  Read the article

• Can't connect to domain computers until reboot

  - by thealliedhacker

  I have a domain with about 300 Windows 7 and XP machines, with the domain controllers running Server 2003. Sometimes, I lose the ability to communicate/authenticate with some of the machines until I reboot my computer. This also happens from other computers and regardless of user account and operating system. In other words, say I'm on ComputerA, and I can't connect to ComputerX. I can go to ComputerB and connect to ComputerX, but ComputerB may not be able to connect to ComputerY. If you reboot ComputerA, then it will be able to connect to ComputerX again. Here are some messages from various utilities: sc: [SC] OpenSCManager FAILED 1722: The RPC server is unavailable. mmc (compmgmt.msc): Computer (computer name) cannot be managed. The network path was not found. explorer (\\computer): Windows cannot access \\(computer name). ping: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) / Average = 1ms

  Read the article

• Troubleshooting intermittantly long 'page loading' problem

  - by justSteve

  Working off IIS 7 with an asp.net mvc app. Most page accesses are lightening quick. Sometimes the browser reports 'page loading' for an exceptionally long time. We are still in the development/testing mode so it's not a network/bandwidth issue. Happens in both IE and FF. No explicit error conditions in the server logs. If i could reproduce it i could run firebug/fiddler to give more info. As it is, it's a little too infrequent to simply leave both those running hoping for the condition to fire - unless/until that's the only option to get better info. I have a hunch this is client-side jquery/ajax related but only a hunch - don't have enough background in either jQuery or MVC to really know what can go wrong. Any initial troubleshooting suggestions welcome. thx

  Read the article

• PeopleSoft 8.52 iPad Certification

  - by Dave Bain

  One of the real gems in the PeopleTools 8.52 release is the certification of PeopleSoft applications running in the Safari Browser on an iPad.  It is nice that PeopleSoft is not constrained by technology like Adobe Flex/Flash, so announcements like this "Adobe drops plans for mobile Flash support" do not limit our mobile solution to custom mobile development. There are parts of PeopleSoft applications that operate better on iPads than others.  One of the best is Workcenters.  Workcenters were new to PeopleTools 8.51 and we are starting to see more and more adoption of them.  Workcenters are roll based landing pages that eliminate difficult navigation by providing access to most links, pages, and reports a user in a role needs.  One of the nicest I’ve seen is the Supply Manager Workspace.  Here are some links to screenshots of what a WorkCenter looks like on an iPad: Here's the standard PeopleSoft Login Page The Supply Manager Workspace looks great full screen on an iPad iPad has a great user interface to zoom, here's a screenshot of an upclose view of an analytic. Touch one of the analytics and it drills into the details. Go ahead and give it a try.  WorkCenters and Dashboards are starting to show up across applications.  For a quick one to try, navigate to the PeopleTools->Integration Broker->Integration Network WorkCenter.  It’s new in PeopleTools 8.52.

  Read the article

• GF 3.0.1 + Virtual Server: www.myhost.com:8080/projectname-war => www.myhost.com. How?

  - by Harry Pham

  I need to change www.myhost.com:8080/myproject-war to www.myhost.com. This is what I try. In admin console in Glassfish 3.0.1, I create a http-listener-3 with port 9090 and address 0.0.0.0 (I want to have port 80, but got access-denied or some sort). I then create a virtual server call scholar, with Id=scholar, Hosts=${com.sun.aas.hostName}, Network Listeners: http-listener-3, Default Web Module=project#project-war.war(it is the only option from the drop down list since I only deploy 1 app). Then under Applications, I set the virtual server of the application to be scholar. Save and restart. I try localhost:9090, and expecting that it will load my project like as if I type localhost:9090/project-war. But it does not. I already set the Default Web Module, to be the project, why doesnt it load the project by default?

  Read the article

• Exchange 2010 - Trying to add an additional domain fails

  - by Tom Beech

  We're trying to add an additional domain to our existing exchange 2010 box. I'm doing this under our network administrator user which has pretty much every permission but i'm getting: VERBOSE: Connecting to EXCHANGE01.isd.isdevelopment.co.uk VERBOSE: Connected to EXCHANGE01.isd.isdevelopment.co.uk. [PS] C:\Windows\system32>new-AcceptedDomain -Name 'NewName' -DomainName 'newDomainaddress.com' -DomainType 'Autho ritative' Active Directory operation failed on DCSERVER01.isd.isdevelopment.co.uk. This error is not retriable. Additional inform ation: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BB9, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-AcceptedDomain], ADOperationException + FullyQualifiedErrorId : 282695C2,Microsoft.Exchange.Management.SystemConfigurationTasks.NewAcceptedDomain Any help will be appreciated. Tom

  Read the article

• Systemd can't start script?

  - by TokyoMEWS

  I have a BASH-script I want to run on start up. My system is running systemd so I created a .service file with whith what I think is the neccessary information: [Unit] Description=My Script After=network.target [Service] ExecStart=/home/myscript.sh [Install] WantedBy=multi-user.target I used systemctl enable to 'register' it an rebooted. On boot I was told my script would be executed, but I could neither see any of the messages ECHO should display on screen nor did it write something to a file, according to what I had written in the script. Additionally, It does not start the application it's supposed to start. Systemctl status tells me that the script has run and exited successfully. Still, the script has no effect. If I run the script from a shell it works perfectly fine. Do any of you know what could be my problem?

  Read the article

• South Florida Stony Brook Alumni &amp; Friends Reception 2011

  - by Sam Abraham

  It’s official, we are kicking off a local South Florida Chapter for Stony Brook alumni and friends in the area to keep in touch.  Our first networking event will be taking place at Champps, Ft Lauderdale on November 17th, 6:00-8:00 PM. Admission is free and open for everyone, whether or not they are Stony Brook Alums. The team at Champps is offering us great specials (Happy hour deals, half-price appetizers,etc.) that we can choose to enjoy while we network and catch up. (Event Announcement: http://alumniandfriends.stonybrook.edu/page.aspx?pid=299&cid=1&ceid=171&cerid=0&cdt=11%2f17%2f2011) I look forward to share and revive my college experience which I believe was the starting line of my ongoing life journey. It would be also great to hear others’ take as they reflect on their experiences throughout their college years. I invite anyone interested in keeping in touch with friends and alums of Stony Brook to join our LinkedIn or Facebook groups.   The Stony Brook Alumni Association – South Florida Chapter LinkedIn Group: http://www.linkedin.com/groups?gid=3665306&trk=myg_ugrp_ovr The Stony Brook Alumni Association – South Florida Chapter Facebook Group: http://www.facebook.com/#!/groups/114760941910314/

  Read the article

• Windows 7 can ping but can't see device on other subnet

  - by user192702

  I have 2 Windows 7 on 2 different subnets but 1 of them is unable to reach a NAS. The topology is as follow. Any idea why this is the case? Is there some Windows settings I need to apply? Subnet 1 - PC 1 - NAS Subnet 2 - PC 2 PC 1 is able to do the following: - Load the admin page on the browser. - Show the NAS under Windows Explorer - Network. - Access the NAS when typed in \\ in Windows Explorer. PC 2 is unable to do any of the above 3. It can however ping the NAS and get a response.

  Read the article

• How do I mount my Android phone?

  - by Amanda

  I'm puzzled because my phone used to just appear when I plugged it in. It doesn't anymore and The development options are definitely set to allow USB debugging. The phone is charging via USB but doesn't appear in lsusb [0 amanda@luna android-sdk-linux_86]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera Bus 003 Device 012: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 003 Device 013: ID 413c:2010 Dell Computer Corp. Keyboard Bus 003 Device 014: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] adb devices -l shows nothing. In my Wireless and Network settings I changed the USB connection settings to "Mass storage" -- they were set to "Ask on connection" though I definitely wasn't getting asked. I don't get any Click here to connect via USB alert either. I'm not even sure whether the issue is my phone or my computer. It seems odd that it isn't even appearing in lsusb Not for nothing, the thumb drive on my keyring also does not appear in lsusb -- I've tried both in a bunch of different ports. I kind of assume the thumb drive is just borked, but it could be my OS.

  Read the article

• 'DNS server isn't responding' error in windows 7 home premium

  - by pradeeptp

  Hi All, I bought a brand new Dell Studio 1558 just last week. It has windows 7 home premium 64-bit installed on it. My friend who is occupying the adjacent room has a laptop with windows XP. Both of us are connecting to the same wireless router of the hotel. My friend is able to connect to the wireless network without any trouble, but when I try to connect, I get the error "DNS service isn't responding". I get this error when I run the troubleshooting option. I met two more people in the same hotel with win XP laptop and they too dont have any problem. I have gone to possibly all the forums and website but I haven't been able to fix this error :(. I have done all the basic troubleshooting but I have no luck yet. Pls help. Following is one forum where the problem seem to have been trouble shooted but not for all. http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/eeb84518-903d-46d1-9398-80cf211878d7

  Read the article

• How can I restrict SSH access when the source IP is dynamic

  - by Supratik

  Hi I want to protect SSH access to our live web server from all IP's except our office static IP. There are some employees who connects to this live server from their dynamic IP's. So, it is not always possible for me to change in the iptables rule in live server whenever the dynamic IP of the employee changes. I tried to put them in office VPN and allowed only SSH access from office IP but the office connection is slow in compared to our employee's private internet connection, moreover it adds an extra overhead to our office network. Is there any way I can solve this problem ?

  Read the article

• Metro Apps on Windows 8 aren't working with static IP behind auth proxy

  - by Kamal

  In Windows 8 Professional, Metro Apps and Windows Update do not work with static IP settings behind authenticated proxy server. They work with DHCP on the same proxy settings (we have DHCP for wifi and static IP for LAN, both using the same proxy server). IE, Chrome and other desktop apps work nicely with both. Metro apps worked with an auth proxy (DHCP only), when I changed their proxy settings from the "edit group policy" option: Start → Settings → Edit Group Policy → Computer Configuration → Administrative Templates → Network Isolation → Internet Proxy for Apps How can I fix this?

  Read the article

• Transmission shutdown script for multiple torrents?

  - by Khurshid Alam

  I have written a shutdown script for transmission. Transmission calls the script after a torrent download finishes. The script runs perfectly on my machine (Ubuntu 11.04 & 12.04). #!/bin/bash sleep 300s # default display on current host DISPLAY=:0.0 # find out if monitor is on. Default timeout can be configured from screensaver/Power configuration. STATUS=`xset -display $DISPLAY -q | grep 'Monitor'` echo $STATUS if [ "$STATUS" == " Monitor is On" ] ### Then check if its still downloading a torrent. Couldn't figure out how.(May be) by monitoring network downstream activity? then notify-send "Downloads Complete" "Exiting transmisssion now" pkill transmission else notify-send "Downloads Complete" "Shutting Down Computer" dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.RequestShutdown fi exit 0 The problem is that when I'm downloading more than one file, when the first one finishes, transmission executes the script. I would like to do that but after all downloads are completed. I want to put a 2nd check ( right after monitor check) if it is still downloading another torrent. Is there any way to do this?

  Read the article

• would a dynamic wan disrupt a static lan?

  - by JohnMerlino

  So I found out that the cable company use the DHCP to assign the public ip address dynamically. So a subscriber's public facing ip address can change during the length of their subscription. Now what if you remove DHCP on a particular computer, which you plan to use as a web server, so that the machine has a static, unchanging IP address. If the public ip address was to change, would this confuse the Network Address Translation (NAT) and cause some sort of disruption? Please answer in layman terms, as I'm still grasping concepts here. thanks.

  Read the article

• Why do my proxy settings keep changing?

  - by tjrobinson

  I am running Windows 7 and a few times a day the "Use a proxy server for your LAN (These settings will not apply to dial-up of VPN connections)." under "Local Area Network (LAN) Settings" checkbox becomes checked seemingly on it's own. Am I pressing some kind of hidden keyboard shortcut accidentally? What sort of applications might alter this setting and why? Unfortunately as this is a developer box, there's a lot of stuff that could be interfering, e.g. Visual Studio 2010, Windows Azure SDK and various browsers. Has anyone else come across this?

  Read the article

• HP Cue-Scanning Flow component freezes

  - by Nathan Fellman

  I am trying to scan with an HP network scanner (actually E6500 all-in-one). Whenever I try to scan, it starts up a flash screen with HP Scanning written all over it, which proceeds to do nothing. Digging in, I found that the process that gets stuck is hpqkygrp.exe, aka "HP CUE-Scanning Flow Component". This happened when I tried scanning from onenote or from the HP Solution Center. However, it seems that scanning from Windows' Fax and Scan utility works fine. As a (probably related) side-note, scanning directly from the scanner (using the buttons on its panel) doesn't work either. How can I keep this process from getting stuck?

  Read the article

• IBM laptop remove access-connections

  - by Kevin

  I installed IBM Access Connections on my IBM t61 laptop to manage my wireless connections but it simply will not connect to my network. I want to uninstall it and try the Intel software which is capable to performing the same task. However, when I go into "Control Panel" - "Add/Remove Programs" and try to "Remove" this package, it simply opens up a screen and closes it immediately. This happens too fast for me to see whether its an error. Has anyone encountered this issue ? The event logs do not show any error.

  Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >