Search Results

Search found 19690 results on 788 pages for 'result partitioning'.

Page 576/788 | < Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >

  • What are the arguments against parsing the Cthulhu way?

    - by smarmy53
    I have been assigned the task of implementing a Domain Specific Language for a tool that may become quite important for the company. The language is simple but not trivial, it already allows nested loops, string concatenation, etc. and it is practically sure that other constructs will be added as the project advances. I know by experience that writing a lexer/parser by hand -unless the grammar is trivial- is a time consuming and error prone process. So I was left with two options: a parser generator à la yacc or a combinator library like Parsec. The former was good as well but I picked the latter for various reasons, and implemented the solution in a functional language. The result is pretty spectacular to my eyes, the code is very concise, elegant and readable/fluent. I concede it may look a bit weird if you never programmed in anything other than java/c#, but then this would be true of anything not written in java/c#. At some point however, I've been literally attacked by a co-worker. After a quick glance at my screen he declared that the code is uncomprehensible and that I should not reinvent parsing but just use a stack and String.Split like everybody does. He made a lot of noise, and I could not convince him, partially because I've been taken by surprise and had no clear explanation, partially because his opinion was immutable (no pun intended). I even offered to explain him the language, but to no avail. I'm positive the discussion is going to re-surface in front of management, so I'm preparing some solid arguments. These are the first few reasons that come to my mind to avoid a String.Split-based solution: you need lot of ifs to handle special cases and things quickly spiral out of control lots of hardcoded array indexes makes maintenance painful extremely difficult to handle things like a function call as a method argument (ex. add( (add a, b), c) very difficult to provide meaningful error messages in case of syntax errors (very likely to happen) I'm all for simplicity, clarity and avoiding unnecessary smart-cryptic stuff, but I also believe it's a mistake to dumb down every part of the codebase so that even a burger flipper can understand it. It's the same argument I hear for not using interfaces, not adopting separation of concerns, copying-pasting code around, etc. A minimum of technical competence and willingness to learn is required to work on a software project after all. (I won't use this argument as it will probably sound offensive, and starting a war is not going to help anybody) What are your favorite arguments against parsing the Cthulhu way?* *of course if you can convince me he's right I'll be perfectly happy as well

    Read the article

  • OSB 11g & SAP – Single Channel/Program ID for Multiple IDOCs

    - by Shub Lahiri, A-Team
    Background This note is a supplement to the blog entry, SOA 11g & SAP – Single Channel/Program ID for Multiple IDOCs by Greg Mally. Greg has shown how a single SOA Suite composite can be used with iWay Adapters to receive multiple IDOC types via a single channel in the adapter, corresponding to a single programID on the SAP system. We will try to address the same requirements within the OSB framework here. Project Built - Design Time The basic build of an OSB project with iWay SAP Adapter, as seen in another entry in this blog, consists of working in OSB Design console and Application Explorer. OSB Design Time - Part 1 We will create a placeholder project first in OSB with a proper directory structure, so that we can export the WSDL, XSD and the JCA binding information from Application Explorer directly into this project. Application Explorer - iWay Design Time Tool Receiving IDOCs is classified as an inbound event within Application Explorer. For setting up events, a channel is first defined (e.g. iDoc_Channel) using the same PROGRAMID (RFC destination), as defined within SAP for the OSB server. Next, the same channel is used to export the JCA Inbound Event artifacts for the candidate IDOC, e.g. DEBMAS06 directly to the pre-created OSB project. Note that the validation for schema has been turned off. As a result, this will allow the adapter, at runtime, to use a single channel to receive multiple IDOC types from SAP and pass them on to the OSB runtime engine without any validation. In other words, we do not have to repeat the above step for each IDOC type. OSB Design Time - Part 2 Create 2 simple XML based Business Services to write to a file, e.g.  SAP_DEBMAS_File and SAP_MATMAS_File. Next, generate a Proxy Service using the JCA binding file exported from Application Explorer in the previous section. In the generated proxy service, edit the message flow and add a route node. Add a routing table in the route node with the following routing function. fn:local-name-from-QName(fn:node-name($body/*[1])) This function takes advantage of the fact that the XML payload at runtime, after translation by adapter, has the IDOC type as the top element. With the routing function in place, build the routing table to add 2 branches to route the IDOCs to the appropriate Business Service for writing the XML payload to files in separate directories. This completes the build of the OSB project. Testing - Run-Time After deployment and activation, the SAP adapter will wait to receive multiple types of IDOCs sent from the SAP system using a single channel. Upon receipt of the IDOCs, the OSB project will route them appropriately to save the corresponding XML payloads for different IDOC types in different directories.

    Read the article

  • How can I solve this SAT edge case?

    - by ssb
    I have an SAT implementation that basically works, and the fact that it works is what's giving me a few headaches. Basically there are some situations where using the SAT doesn't quite give me my intended result. One of these involves movement across multiple collision objects. Or to put it another way, if I have several collision boxes lined up next to each other such as to create something like a wall or a floor, movement along that surface while constantly applying force into that surface sometimes causes hangups, i.e. the player stops moving. This illustration shows what I mean: The 2 boxes on the bottom represent a floor, and the box on top/in the middle represents what my player is doing. There are several squares lined up as world obstacles to create some kind of wall, and if I move to the left across this surface while holding the down key then the issue arises. It only happens at the exact dividing point between two blocks. It only happens when moving to the left. At any rate I think I know why it happens, but I don't know how to solve it. Basically when I update my player movement I consider which directions are pressed, naturally, so if down is pressed I will add the speed to the Y component, and so on. But due to the way my SAT is implemented, when the penetration into the shape is the same from both sides it just goes with the smallest axis that it finds first, and it checks collisions against objects in the order that they were created because it goes through a foreach loop on the list of collidable objects. So this all adds up to the effect of if I'm moving to the left over a series of boxes while holding down, it will resolve me back to the right out of the first box and then up out of the box to the right of it, and this continues as long as the penetration is the same. The odd part is that this doesn't happen every time, which I am going to attribute to some oddity regarding multiplying velocity by the game time and causing some minor discrepancies between the lengths. Ultimately what this boils down to is that it will keep resolving me to the right and up, but this is technically expected behavior. All the solutions I can think of only address the symptoms of this problem and not the actual cause, such as not using many blocks to create walls or shapes, which is an option I'd like to keep open. I could also change which axis my algorithm defaults to, but that would just cause problems when going up/down along the walls. What can I do to fix this?

    Read the article

  • The value of money

    - by ambreesh
    A dictionary definition of money is "any circulating medium of exchange, including coins, paper money, anddemand deposits". If you ask an economist for a definition of money, you will be introduced to terms like M1, M2, M3, all of which denote tangible assets - currency, and anything that is liquid enough to be used as currency; checks, stamps and now mobile minutes being examples. The macroeconomic theory of money is fascinating - the effect of money supply on exchange rates and interest rates, the concept of the "money multiplier" (if I deposit $10 into a bank, the bank will likely loan $8 of it to someone else, who will then give it to someone else in exchange for goods and services, who will then likely deposit it again, which will result in the bank loaning it again and so on - making that $10 of money supply worth a lot more ($10+$8+$x+...)).  But all this depends on money supply - in other words, money that is printed by the mint. The Treasury Department spends a lot of time figuring out how much money to print, there is lot being written on QE2 now-a-days, which is intended to increase the money supply. Money is used to purchase goods and services, and yes it is saved too but that is so one can purchase goods and services later. Completely unrelated, there is a sea change occurring in the web world, dominated by, I believe, Facebook. With 500M active users and growing, FB has the ability to introduce a "money supply" which is completely unrelated to today's "money". Using today's money, a FB user can buy a certain number of FB$s, and then use the FB$s within FB to purchase goods and services - with the money multiplier kicking in. I remember talking with a colleague about this a few years ago, the true way to monetize the web is to introduce an alternative system to the existing, and FB has the ability to do just that. There is enough momentum, enough mass for FB to start to monetize its user base. And completely screw up the economists at the Treasury, not to mention disintermediating the banks completely. The only other ubiquitous asset is mobile minutes. People exchanging mobile minutes for tangible goods and services happens today, the big difference however is the demographic. While Safaricom offers this ability in Kenya today, FB has the 15-40 year middle class user as their user. And the next generation is growing up with FB as a standard channel for communicating with their peers. Virtual flowers when going in for the kill? If your target is an avid FB user, why not? It certainly is a lot more green - no pun intended!

    Read the article

  • Is this Ubuntu One DBus signal connection code correct?

    - by Chris Wilson
    This is my first time using DBus so I'm not entirely sure if I'm going about this the right way. I'm attempting to connect the the Ubuntu One DBus service and obtain login credentials for my app, however the slots I've connected to the DBus return signals detailed here never seem to be firing, despite a positive result being returned during the connection. Before I start looking for errors in the details relating to this specific service, could someone please tell me if this code would even work in the first place, or if I'm done something wrong here? int main() { UbuntuOneDBus *u1Dbus = new UbuntuOneDBus; if( u1Dbus->init() ){ qDebug() << "Message queued"; } } UbuntuOneDBus::UbuntuOneDBus() { service = "com.ubuntuone.Credentials"; path = "/credentials"; interface = "com.ubuntuone.CredentialsManagement"; method = "register"; signature = "a{ss} (Dict of {String, String})"; connectReturnSignals(); } bool UbuntuOneDBus::init() { QDBusMessage message = QDBusMessage::createMethodCall( service, path, interface, method ); bool queued = QDBusConnection::sessionBus().send( message ); return queued; } void UbuntuOneDBus::connectReturnSignals() { bool connectionSuccessful = false; connectionSuccessful = QDBusConnection::sessionBus().connect( service, path, interface, "CredentialsFound", "a{ss} (Dict of {String, String})", this, SLOT( credentialsFound() ) ); if( ! connectionSuccessful ) qDebug() << "Connection to DBus::CredentialsFound signal failed"; connectionSuccessful = QDBusConnection::systemBus().connect( service, path, interface, "CredentialsNotFound", "(nothing)", this, SLOT( credentialsNotFound() ) ); if( ! connectionSuccessful ) qDebug() << "Connection to DBus::CredentialsNotFound signal failed"; connectionSuccessful = QDBusConnection::systemBus().connect( service, path, interface, "CredentialsError", "a{ss} (Dict of {String, String})", this, SLOT( credential if( ! connectionSuccessful ) qDebug() << "Connection to DBus::CredentialsError signal failed"; } void UbuntuOneDBus::credentialsFound() { std::cout << "Credentials found" << std::endl; } void UbuntuOneDBus::credentialsNotFound() { std::cout << "Credentials not found" << std::endl; } void UbuntuOneDBus::credentialsError() { std::cout << "Credentials error" << std::endl; }

    Read the article

  • SharePoint Designer 2010 Workflow Email Link To Item

    - by Brian Jackett
    In this post I’ll walk you through the process of sending an email that contains a link to the current item from a SharePoint Designer 2010 workflow.  This is a process that has been published on many other forums and blogs, but many that I have seen are more complex than seems necessary. Problem     A common request from SharePoint users is to get an email which contains a link to review/approve/edit the workflow item.  SharePoint list items contain an automatic property for Url Path, but unfortunately that Url is not properly formatted to retrieve the item if you include it directly on the message body.  I tried a few solutions suggested from other blogs or forums that took a substring of the Url Path property, concatenated the display form view Url, and mixed in some other strings.  While I was able to get this working in some scenarios I still had issues in general. Solution     My solution involved adding a hyperlink to the message body.  This ended up being far easier than I had expected and fairly intuitive once I found the correct property to use.  Follow these steps to see what I did.     First add a “Send an Email” action to your workflow.  Edit the action to pull up the email configuration dialog.  Click the “Add hyperlink” button seen below. When prompted for the address of the link click the fx button to perform a lookup.  Choose Workflow Context from the “data source” dropdown.  Choose Current Item URL from the “field from source” dropdown.  Click OK. Your Edit Hyperlink dialog should now look something like this. The end result will be a hyperlink added to your email pointing to the current workflow item.  Note: this link points to the non-modal dialog display form (display form similar to what you had in 2007). Conclusion     In this post I walked you through the steps to create a SharePoint Designer 2010 workflow with an email that contains a link to the current item.  While there are many other options for accomplishing this out on the web I found this to be a more concise process and easy to understand.  Hopefully you found this helpful as well.  Feel free to leave any comments or feedback if you’ve found other ways that were helpful to you.         -Frog Out

    Read the article

  • Oracle's Integrated Systems Management and Support Experience

    - by Scott McNeil
    With its recent launch, Oracle Enterprise Manager 11g introduced a new approach to integrated systems management and support. What this means is taking both areas of IT management and vendor support and combining them into one integrated comprehensive and centralized platform. Traditional Ways Under the traditional method, IT operational teams would often focus on running their systems using management tools that weren’t connected to their vendor’s support systems. If you needed support with a product, administrators would often contact the vendor by phone or visit the vendor website for support and then log a service request in order to fix the issues. This method was also very time consuming, as administrators would have to collect their software configurations, operating systems and hardware settings, then manually enter them into an online form or recite them to a support analyst on the phone. For the vendor, they had to analyze all the configuration data to recreate the problem in order to solve it. This approach was very manual, uncoordinated and error-prone where duplication between the customer and vendor frequently occurred. A Better Support Experience By removing the boundaries between support, IT management tools and the customer’s IT infrastructure, Oracle paved the way for a better support experience. This was achieved through integration between Oracle Enterprise Manager 11g and My Oracle Support. Administrators can not only manage their IT infrastructure and applications through Oracle Enterprise Manager’s centralized console but can also receive proactive alerts and patch recommendations right within the console they use day-in-day-out. Having one single source of information saves time and potentially prevents unforeseen problems down the road. All for One, and One for All The first step for you is to allow Oracle Enterprise Manager to upload configuration data into Oracle’s secure configuration repository, where it can be analyzed for potential issues or conflicts for all customers. A fix to a problem encountered by one customer may actually be relevant to many more. The integration between My Oracle Support and Oracle Enterprise Manager allows all customers who may be impacted by the problem to receive a notification about the fix. Once the alert appears in Oracle Enterprise Manager’s console, the administrator can take his/her time to do further investigations using automated workflows provided in Oracle Enterprise Manager to analyze potential conflicts. Finally, administrators can schedule a time to test and automatically apply the fix to all the systems that need it. In the end, this helps customers maintain their service levels without compromise and avoid experiencing unplanned downtime that may result from potential issues or conflicts. This new paradigm of integrated systems management and support helps customers keep their systems secure, compliant, and up-to-date, while eliminating the traditional silos between IT management and vendor support. Oracle’s next generation platform also works hand-in-hand to provide higher quality of service to business users while at the same time making life for administrators less complicated. For more information on Oracle’s integrated systems management and support experience, be sure to visit our Oracle Enterprise Manager 11g Resource Center for the latest customer videos, webcast, and white papers.

    Read the article

  • Ubuntu Sluggish and Graphics Problem after Nvidia Driver Update

    - by iam
    I just recently started using Ubuntu (12.04) since a few weeks ago and noticed that the interface is very slow and sluggish: On Dash, I have to type the entire app name and wait a few seconds before it shows up in the search box, and a bit later before it displays search result Opening new files or applications takes also quite long and awkward Dragging icons or moving app windows around is not very spontaneous too: I have to take extra attention in moving the mouse otherwise Ubuntu would not do a correct movement or might ends up doing something incorrect instead e.g. opening the windows to full screen options or move the file to different folders, which is frustrating My PC is a few years old already (1.7 GB RAM) so this could be a reason too but when I checked in System Monitor it's hardly ever consuming much memory. Plus web-surfing on Firefox is actually lightning fast (much more than Windows), so I suspect there might be something wrong with the graphics driver (mine is GeForce 7050). I checked around System Settings and found an option to update the Nvidia driver. So I tried it and restarted, as instructed. Now, I got into a big problem upon restart... as the login-screen windows (where I have to type in the password) would take several attempts to display and finally did not manage to (it'd freeze for several seconds before there's any movement again). The background screen also kept reloading several times too and at some point the screen turned black with pixelated color strips running on the bottom 1/3 of the screen, and after a long while the background screen would come up again. Eventually I'd manage to be able to access the desktop but the launcher, top menu bar and app windows border would not disappear. I searched around and found many other people have this similar problem after updating Nvidia driver too, and on some threads the suggestion is to use "killall -u $USER" in command line (it's the only thing among various online suggestions I could do, as at that point I could not access Terminal without the launcher - Ctrl-Alt-T doesn't work for me). So I did that and was able to access the desktop correctly again with launchee/menu by creating a new account. But I would still have the same problem if logging into my original account. So I just finally tried upgrading to 12.10 and now can access my original account with fully-functional desktop - the launcher, menu and windows border are all back now. However, the problem with sluggishness still remains. And now I get scared of ever having to update the Nvidia driver again! I wonder if anyone knows what's the reason that updating the Nvidia driver is causing this problem and is there a way I can update it safely in the future? I'm still not sure how to solve the problem with the sluggishness too and not sure where else to look to find a solution.

    Read the article

  • Music Notation Editor - Refactoring view creation logic elseware

    - by Cyril Silverman
    Let me preface by saying that knowing some elementary music theory and music notation may be helpful in grasping the problem at hand. I'm currently building a Music Notation and Tablature Editor (in Javascript). But I've come to a point where the core parts of the program are more or less there. All functionality I plan to add at this point will really build off the foundation that I've created. As a result, I want to refactor to really solidify my code. I'm using an API called VexFlow to render notation. Basically I pass the parts of the editor's state to VexFlow to build the graphical representation of the score. Here is a rough and stripped down UML diagram showing you the outline of my program: In essence, a Part has many Measures which has many Notes which has many NoteItems (yes, this is semantically weird, as a chord is represented as a Note with multiple NoteItems, individual pitches or fret positions). All of the relationships are bi-directional. There are a few problems with my design because my Measure class contains the majority of the entire application view logic. The class holds the data about all VexFlow objects (the graphical representation of the score). It contains the graphical Staff object and the graphical notes. (Shouldn't these be placed somewhere else in the program?) While VexFlowFactory deals with actual creation (and some processing) of most of the VexFlow objects, Measure still "directs" the creation of all the objects and what order they are supposed to be created in for both the VexFlowStaff and VexFlowNotes. I'm not looking for a specific answer as you'd need a much deeper understanding of my code. Just a general direction to go in. Here's a thought I had, create an MeasureView/NoteView/PartView classes that contains the basic VexFlow objects for each class in addition to any extraneous logic for it's creation? but where would these views be contained? Do I create a ScoreView that is a parallel graphical representation of everything? So that ScoreView.render() would cascade down PartView and call render for each PartView and casade down into each MeasureView, etc. Again, I just have no idea what direction to go in. The more I think about it, the more ways to go seem to pop into my head. I tried to be as concise and simplistic as possible while still getting my problem across. Please feel free to ask me any questions if anything is unclear. It's quite a struggle trying to dumb down a complicated problem to its core parts.

    Read the article

  • Oracle CRM For Public Sector, Commercial Business, Education

    - by michael.seback
    Chongqing Transport Commission Improves Management of Transport Projects The Chongqing Transport Commission is responsible for public passenger, road, and waterway transport in urban and rural areas of Chongqing. The commission administers the region's road and water industry; oversees the construction of transport infrastructure; and manages civil aviation, railroads, roads, waterways, ports, and wharves. "After studying the IT initiatives of other provincial transport commissions, we decided to use Siebel Public Sector to build our integrated transport service system. The Siebel software offers powerful functions that allow us to integrate information and improve the management of our road, rail, and waterway infrastructure projects." - Chen Xiaoming, Vice Director, Information Center, Chongqing Transport Commission. Read more here. Siemens Information Services Increases Productivity by 20% Siemens Information Services Pvt, Ltd. provides back-office account processing services to Siemens' vendors. The company works with Siemens' healthcare, energy, and industry divisions in Europe, the United States, and parts of the Asia-Pacific region. It approves financial services such as processing payroll, accounts data, purchase orders, invoices, and payments, and also creates service catalogs for customers and internal teams. "Oracle CRM ON Demand provides us with a complete view of each customer's data from the moment they log a request to the time we close it. This has eliminated manual requests, and improved the service we offer to our clients across the Asia-Pacific region." -Sunil Zutshi, General Manager, IT, Siemens Information Services Pvt, Ltd. Read more here. China Distance Education Holdings Improves Call Center Productivity by 24% China Distance Education Holdings Limited is a leading provider of online education. The organization offers 174 courses through 16 Web sites, including accounting, healthcare, law, and engineering. In 2010, 215,000 students were enrolled. "Online education is a fast growing sector in China. To maintain our competitiveness, we implemented Oracle Contact Center Anywhere to make it easier and faster for our call center staff to respond to student enquiries. As a result, their productivity increased by 24%." - Qin Songjiang, Chief Technology Officer, China Distance Education Holdings Limited. Read more here.

    Read the article

  • What are some good realistic programming related movies (docu-dramas, documentaries, accurate fiction, etc)?

    - by EpsilonVector
    A while ago I asked this question and the result was this. Following the response I got in the meta question I'm re-asking the question with new guidelines to focus it on the direction I wanted it to have originally. ================================================================== The guidelines are as follows: by "programming related" I mean movies from which we can learn about stuff like the development process, or history of software/computers, or programming culture. In other words, they must be grounded in the industry. No tangential stuff. Good entries answer as many of the following criteria as possible: Teach you about the history of the industry, or the development process, or teach you about important industry related topics (software patents for example) Are based on real life events, companies, people, practices, and they are the main focus of the movie After watching them, you feel like you understand or know something about the programmers' world that you didn't before (or you can see how someone could have such a response). You can point to it and say "this faithfully represents the industry/programmer culture at some point in time". This might be something you would show laymen to explain to them what "your people" are like and what is it that you do. Examples for good entries include: Pirates of Silicon Valley- the story of how Microsoft and Apple started the industry. Revolution OS- The story of Linux's rise to fame, and a pretty good cover of the Free Software/Open Source world. Aardvark'd: 12 Weeks with Geeks- development process. Examples for bad entries: Movies who's sole relevance is that they can be appreciated by programmers. The point of this question is not to be "what are some good movies" with "for a programmer" appended to it. Just because the writers got a few computer jokes right in itself doesn't make it about the industry. Movies where there's a computer related element, but are not about the industry. For example, 24 (the TV series). It's a product of the information age but it isn't actually about it. Another example is movies where there's a really cool programmer character, but are overall about something completely different. Likewise, The Big Bang Theory is not about physics, even though they have a cool physicist as a character. Science fiction, even if it draws ideas from computers. For example, the Matrix trilogy. Movies that you can't point to them and say: this is a faithful representation of our world (at some point in time). If you can't do that then it doesn't mirror the industry. Keep it one entry per answer so that the voting could sort the entries out.

    Read the article

  • Great opportunity to try Windows Azure over the next 7 days if you are a UK developer &ndash; act to

    - by Eric Nelson
    Are you a UK based developer who has been put off from trying out the Windows Azure Platform? Were you concerned that you needed to hand over credit card details even to use the introductory offer? Or concerned about how many charges you might run up as you played with “elastic computing”. Then we might have just what you need. 7 Days of access to the Windows Azure Platform – for FREE (expires June 6th 2010) If you are accepted, you will be given a Windows Azure Platfom subscription that will enable you to create Windows Azure hosted services and storage accounts, SQL Azure databases and AppFabric services without any fear of being charged between now and Sunday the 6th of June 2010. No credit card is required. Important: At the end of Sunday your subscription and all your code and data you have uploaded will be deleted. It is your responsibility to keep local copies of your code and data. Apply now To apply for this offer you need to: email ukdev AT microsoft.com with a subject line that starts “UKAZURETRAIL:” (This must  be present) In the email you need to demonstrate you are UK based (.uk email alias or address or… be creative) And you must include 30 to 100 words explaining What your interest is in the Windows Azure Platform and Cloud Computing What you would use the 7 days to explore Some notes (please read!): We have a limited number of these offers to give away on a first come, first served basis (subject to meeting the above criteria). We plan to process all request asap – but there is a UK bank holiday weekend looming. We will do our best to process all by Tues afternoon (which would still give you 5 days of access) There will be no specific support for this offer. We will not be processing any requests that arrive after Tuesday 1st. In case you were wondering, there is no equivalent offer for developer outside of the UK. This offer is a direct result of UK based training we are currently doing which has some spare Azure capacity which we wanted to make best use of. Sorry in advance if you based outside of the UK. Related Links: If you are UK based, you should also join the UK Windows Azure Platform community http://ukazure.ning.com Microsoft UK Windows Azure Platform page

    Read the article

  • Simplifying C++11 optimal parameter passing when a copy is needed

    - by Mr.C64
    It seems to me that in C++11 lots of attention was made to simplify returning values from functions and methods, i.e.: with move semantics it's possible to simply return heavy-to-copy but cheap-to-move values (while in C++98/03 the general guideline was to use output parameters via non-const references or pointers), e.g.: // C++11 style vector<string> MakeAVeryBigStringList(); // C++98/03 style void MakeAVeryBigStringList(vector<string>& result); On the other side, it seems to me that more work should be done on input parameter passing, in particular when a copy of an input parameter is needed, e.g. in constructors and setters. My understanding is that the best technique in this case is to use templates and std::forward<>, e.g. (following the pattern of this answer on C++11 optimal parameter passing): class Person { std::string m_name; public: template <class T, class = typename std::enable_if < std::is_constructible<std::string, T>::value >::type> explicit Person(T&& name) : m_name(std::forward<T>(name)) { } ... }; A similar code could be written for setters. Frankly, this code seems boilerplate and complex, and doesn't scale up well when there are more parameters (e.g. if a surname attribute is added to the above class). Would it be possible to add a new feature to C++11 to simplify code like this (just like lambdas simplify C++98/03 code with functors in several cases)? I was thinking of a syntax with some special character, like @ (since introducing a &&& in addition to && would be too much typing :) e.g.: class Person { std::string m_name; public: /* Simplified syntax to produce boilerplate code like this: template <class T, class = typename std::enable_if < std::is_constructible<std::string, T>::value >::type> */ explicit Person(std::string@ name) : m_name(name) // implicit std::forward as well { } ... }; This would be very convenient also for more complex cases involving more parameters, e.g. Person(std::string@ name, std::string@ surname) : m_name(name), m_surname(surname) { } Would it be possible to add a simplified convenient syntax like this in C++? What would be the downsides of such a syntax?

    Read the article

  • BizTalk Send Ports, Delivery Notification and ACK / NACK messages

    - by Robert Kokuti
    Recently I worked on an orchestration which sent messages out to a Send Port on a 'fire and forget' basis. The idea was that once the orchestration passed the message to the Messagebox, it was left to BizTalk to manage the sending process. Should the send operation fail, the Send Port got suspended, and the orchestration completed asynchronously, regardless of the Send Port success or failure. However, we still wanted to log the sending success, using the ACK / NACK messages. On normal ports, BizTalk generates ACK / NACK messages back to the Messagebox, if the logical port's Delivery Notification property is set to 'Transmitted'. Unfortunately, this setting also causes the orchestration to wait for the send port's result, and should the Send Port fail, the orchestration will also receive a 'DeliveryFailureException' exception. So we may end up with a suspended port and a suspended orchestration - not the outcome wanted here, there was no value in suspending the orchestration in our case. There are a couple of ways to fix this: 1. Catch the DeliveryFailureException  (full type name Microsoft.XLANGs.BaseTypes.DeliveryFailureException) and do nothing in the orchestration's exception block. Although this works, it still slows down the orchestration as the orchestration still has to wait for the outcome of the send port operation. 2. Use a Direct Port instead, and set the ACK request on the message Context, prior passing to the port: msgToSend(BTS.AckRequired) = true; This has to be done in an expression shape, as a Direct logical port does not have Delivery Notification property - make sure to add a reference to Microsoft.BizTalk.GlobalPropertySchemas. Setting this context value in the message will cause the messaging agent to create an appropriate ACK or NACK message after the port execution. The ACK / NACK messages can be caught and logged by dedicated Send Ports, filtering on BTS.AckType value (which is either ACK or NACK). ACK/NACK messages are treated in a special way by BizTalk, and a useful feature is that the original message's context values are copied to the ACK/NACK message context - these can be used for logging the right information. Other useful context properties of the ACK/NACK messages: -  BTS.AckSendPortName can be used to identify the original send port. - BTS.AckOwnerID, aka http://schemas.microsoft.com/BizTalk/2003/system-properties.AckOwnerID - holds the instance ID of the failed Send Port - can be used to resubmit / terminate the instance Someone may ask, can we just turn off the Delivery Notification on a 'normal' port, and set the AckRequired property on the message as for a Direct port. Unfortunately, this does not work - BizTalk seems to remove this property automatically, if the message goes through a port where Delivery Notification is set to None.

    Read the article

  • Stencil buffer appears to not be decrementing values correctly

    - by Alex Ames
    I'm attempting to use the stencil buffer as a clipper for my UI system, but I'm having trouble debugging a problem I'm running in to. This is what I'm doing: A widget can pass a rectangle to the the stencil clipper functions, which will increment the stencil buffer values that it covers. Then it will draw its children, which will only get drawn in the stencilled area (so that if they extend outside they'll be clipped). After a widget is done drawing its children, it pops that rectangle from the stack and in the process decrements the values in the stencil buffer that it has previously incremented. The slightly simplified code is below: static void drawStencil(Rect& rect, unsigned int ref) { // Save previous values of the color and depth masks GLboolean colorMask[4]; GLboolean depthMask; glGetBooleanv(GL_COLOR_WRITEMASK, colorMask); glGetBooleanv(GL_DEPTH_WRITEMASK, &depthMask); // Turn off drawing glColorMask(0, 0, 0, 0); glDepthMask(0); // Draw vertices here ... // Turn everything back on glColorMask(colorMask[0], colorMask[1], colorMask[2], colorMask[3]); glDepthMask(depthMask); // Only render pixels in areas where the stencil buffer value == ref glStencilFunc(GL_EQUAL, ref, 0xFF); glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP); } void pushScissor(Rect rect) { // increment things only at the current stencil stack level glStencilFunc(GL_EQUAL, s_scissorStack.size(), 0xFF); glStencilOp(GL_KEEP, GL_INCR, GL_INCR); s_scissorStack.push_back(rect); drawStencil(rect, states, s_ScissorStack.size()); } void popScissor() { // undo what was done in the previous push, // decrement things only at the current stencil stack level glStencilFunc(GL_EQUAL, s_scissorStack.size(), 0xFF); glStencilOp(GL_KEEP, GL_DECR, GL_DECR); Rect rect = s_scissorStack.back(); s_scissorStack.pop_back(); drawStencil(rect, states, s_scissorStack.size()); } And this is how it's being used by the Widgets if (m_clip) pushScissor(m_rect); drawInternal(target, states); for (auto child : m_children) target.draw(*child, states); if (m_clip) popScissor(); This is the result of the above code: There are two things on the screen, a giant test button, and a window with some buttons and text areas on it. The text area scroll box is set to clip its children (so that the text doesn't extend outside the scroll box). The button is drawn after the window and should be on top of it completely. However, for some reason the text area is appearing on top of the button. The only reason I can think of that this would happen is if the stencil values were not getting decremented in the pop, and when it comes time to render the button, since those pixels don't have the right stencil value it doesn't draw over. But I can't figure out whats wrong with my code that would cause that to happen.

    Read the article

  • apt-get upgrade stuck at the same package (openjdk-6-jre-headless)

    - by decibyte
    I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do?

    Read the article

  • The Case for Complimentary Software Copies

    - by GGBlogger
    As the Geriatric Geek you can understand that I’ve been writing and studying for over 60 years. That means that I’ve seen insane changes in the computer software industry. I’ve made the joke that I get a new college education every 6 months or so. Of course that’s an exaggeration but it doesn’t make the feeling go away. I have a long standing and strong relationship with Microsoft so I’m armed with virtually every tool they make. It also means that I have access to tons of training material. But here’s the rub… Last year I started a definitive read of Professional Visual Basic 2008. The purpose was to fill in holes in my understanding of various things. I’m currently on page 1119 of some 1400 pages. During this sojourn I’ve decided that the future is web related which is to say that the future of “thick client” applications running as Windows applications is likely to slowly disappear. To that end I’ve taken a side trip or two into the world of ASP (including XML), Silverlight and cloud development. After carefully avoiding (that’s tongue in cheek) XML for years I finally had to bite the bullet, so to speak, and start learning XML in earnest. The most recent result of that was trail downloads of Altova’s MissionKit 2010 for Software Architects and Liquid Technologies Liquid XML Studio Developer Edition. These are both beautiful products and I want to learn them and write about them. Now comes the rub… While 30 day evaluations are generous in allowing casual users to assess these technologies for purchase they are NOT long enough to allow an author to evaluate, learn and ultimately write about them. Even if I devoted the full 30 days to learning, using and writing about say Altova’s suite I wouldn’t have enough time. Liquid XML may be a little easier to learn (one product as opposed to 8).  Add to that the fact that I frequently get sidetracked to add to my kit and it really blows out. It can be extremely frustrating when I’ve devoted hours to a project and suddenly discover that to complete it I will either need to purchase a license or abandon the project. Since my life blood does not depend on the product I end up abandoning the project and moving on. So to the folks from whom I request complimentary copies… I guarantee that if I convert your product to doing paid development work I will purchase a license to do that but as long as I am using your product to study for the purpose of writing samples, teaching use or otherwise promoting your product to other paying customers I will ask that you give me a license so that I can do that without facing the dread expiration of a 30 day trial.

    Read the article

  • Default values - are they good or evil?

    - by Andrew
    The question about default values in general - default return function values, default parameter values, default logic for when something is missing, default logic for handling exceptions, default logic for handling the edge conditions etc. For a long time I considered default values to be a "pure evil" thing, something that "cloaks the catastrophe" and results in a very hard do find bugs. But recently I started to think about default values as some sort of a technical debt ... which is not a straight bad thing but something that could provide some "short term financing" get us to survive the project (how many of us could afford to buy a house without taking out the mortgage?). When I say a "short term" - I don't mean - "do something quickly first and do refactor it out later before it hits the production". No - I am talking about relying on a hardcoded default values in a production software. Granted - it could cause some issues, but what if it only going to cause a single trouble in a whole year. Again - I am talking about the "average" mainstream software here (not a software for a nuclear power station) - the average web site or a UI application for the accounting software, meaning that people lives are not at stake, nor millions of dollars. Again, from my experience, business users would rather live with the software which "works somehow", rather then wait for a perfect one. And the use of default values helps a lot if you develop a software in a RAD style. But again - the longest debug sessions I have spent were because of the bugs introduced by a default value which either stopped being "a default" along the way or because a small subsystem has recently been upgraded and as a result of this upgrade it does not handle the default correctly (e.g. empty list vs null, or null string vs empty string). So my question is - are the default values good or evil. And if they are a technical debt - how do measure up how much you can borrow so you can afford the repayments? Would really appreciate any input. Cheers. EDIT: If I am using the default values as a way to cut the corners during the development - and if the corners cutting results in a bugs and issues - what is the methodology to recover from these issues?

    Read the article

  • Why is it necessary to install EFI/rEFInd/UEFI/... on a SD Card since the Macbook Pro seems to already have it?

    - by user170794
    Dear askubuntu members, I own a Macbook Pro (late 2009) and when I boot the laptop and hold the alt key meanwhile, there is a EFI screen, so EFI is installed on... the firmware? I had a few troubles with my hard disk, so I had to change it, but I haven't installed OS X, I have only installed Ubuntu and still the EFI screen is there which is surely a good thing. As the new hard disk is making troubles again, I am using Puppy Linux, booting from a CD each time, which is unconfortable. So I am trying to have Ubuntu installed on a SD Card. After having spent many months on the internet grabing informations anywhere I can and trying several things, I applied this method: http://www.weihermueller.de/mac/ I succeeded in making one SD Card recognizable by the EFI of my laptop (holding alt key @ boot), but nothing installed on it yet as I fear to lose the recognizable-by-EFI part. I haven't succeded in producing the same result on another SD Card. I have a bootable USB key of Ubuntu (yipee) which works like a live CD, made with the help of Universal Linux UDF Creator, found there: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ on which I have put Ubuntu 13.04 64bit, retrieved from the official deposits. Eventhough I have to add the "nouveau.noaccel=1" option to the grub command line launching Linux, it works (yipee again) properly as a live cd. When installing Ubuntu I come across the "where do I wanna put Ubuntu" window, I partition another SD Card in: the EFI part (40MB) the Linux part (15GB< <16GB) The installation works fine and finishes with no problem. But at the reboot, the SD Card where Linux is installed is not recognized by the EFI, the icons are : the CD (Puppy Linux), the USB stick (from Linux UDF Creator), the hard drive (the formerly-working Ubuntu 12) but no fourth icon of the SD Card whatsoever. As the title of this thread suggests, I am wondering: why there is a need for EFI to be installed on the SD Card since EFI seems to be on my laptop anyway? why EFI has to be on a different partition than the Linux's one? How do both parts communicate? why the EFI part on the SD Card made with the help of the live-USB key isn't recognized? on the EFI partition, there is a folder named "EFI" which contains another folder named "ubuntu" which contains a file named "grubx64.efi", why is there a thing called grub? Is it the Linux's grub where one can chose either to boot, to boot in safe mode, etc.? Thank you for your patience, looking forward for any kind of answer, Julien

    Read the article

  • CAM v2.0 ships – all new foundation version

    - by drrwebber
    The latest release of the CAM editor toolset is now available on Sourceforge.net – search NIEM. In this all new version the support from Oracle has enabled a transformation of the editor underpinning Java framework and results in 3x performance improvement and 50% better memory utilization. The result of nearly six months of improvements are catalogued in the release notes. http://sourceforge.net/projects/camprocessor/files/CAM%20Editor/Releases/2.0/CAM_Editor_2-0_Release_Notes.pdf/download However here I’d like to talk about the strategic vision and highlight specific new go to features that make a difference for exchange schema designers and with a focus on the NIEM community. So why is this a foundation version? Basically the new drag and drop designer tool allows you to tailor your own dictionary collection of components and then simply select and position those into your resulting exchange structure. This is true global reuse enabled from a canonical domain dictionary collection. So instead of grappling with XSD Schema syntax, or UML model nuances – this is straightforward direct WYSIWYG visual engineering – using familiar sets of business components. Then the toolkit writes the complex XSD Schema for you, along with test samples, documentation, XMI/UML models, Mindmaps and more. So how do you get a set of business components? The toolkit allows you to harvest these from existing schema collections or enterprise data models, or as in the case of NIEM, existing domain dictionary collections. I’ve been using this for the latest IEEE/OASIS/NIST initiative on a Common Data Format (CDF) for elections management systems. So you can download those from OASIS and see how this can transform how you build actual business exchanges – improving the quality, consistency and usability – and dramatically allowing automated generation of artifacts you only dreamed of before – such as a model of your entire major exchange collection components. http://www.oasis-open.org/committees/documents.php?wg_abbrev=election So what we have here is a foundation version – setting the scene and the basis for changing how people can generate and manage information exchanges. A foundation built using the OASIS CAM standard combined with aspects of the NIEM Naming and Design Rules and the UN/CEFACT Core Components specifications and emerging work on OASIS CIQ name and address and ANSI/ISO code list schema. We still have a raft of work to do to integrate this into SOA best practices and extend the dictionary capabilities to assist true community development. Answering questions such as: - How good is my canonical component collection? - How much reuse is really occurring? - What inconsistencies and extensions are there in the dictionary components? Expect us to begin tackling these areas now that the foundation is in place. The immediate need is to develop training and self-start materials – so we will be focusing there for the next couple of months and especially leading up to the IJIS industry event in July in New Jersey, and the NIEM NTE event in August in Philadelphia. http://sourceforge.net/projects/camprocessor

    Read the article

  • Windows Phone 7 Development Updates &ndash; March 8th 2011

    - by Nikita Polyakov
    Here are the latest update from the Windows Phone 7 Developer Worlds that went live this month. Here are some of the latest numbers: Windows Phone Marketplace currently offers more than 9,000 quality apps and games and enjoys a base of over 32,000 registered developers, delivering an average of 100 new apps every day. There have been over 1 million downloads of the developers tools for Windows Phone 7. Trial version help you sell more Trials result in higher sales by the numbers: Users like trials  - paid apps with trial functionality are downloaded 70 times more than paid apps that don’t Nearly 1 out of 10 trial apps downloaded convert to a purchase and generate 10 times more revenue on average than paid apps that don’t include trial functionality. Trial downloads convert to paid downloads quickly. More than half of trial downloads that convert to a sale do so within the 1st 24 hours of trial download, and mostly within 2 hours of trial download. Microsoft Ad Control is gaining traction By the numbers - ad supported Windows Phone 7 apps are: Roughly ¼ of all registered U.S. WP7 developers have downloaded the free Ad SDK for Silverlight and XNA Of ad funded apps, over 95 percent use the free Microsoft Advertising Ad Control Monthly impressions from our Ad Exchange has continued to grow by double digits – impressions increased by 376 percent since January Ad Control, the first wave of “How Do I” videos are now available on MSDN: Create an Ad in a Windows Phone 7 XNA Game App Register Ad-Enabled Windows Phone 7 Apps Measure Ad Performance of Windows Phone 7 Apps Boarder International App submission for Free Apps through Yalla Apps As of today you can start submitting your free applications in developer markets that are currently not covered by Microsoft. To submit your Free application if you DO NOT belong to one of the Marketplace supported countries, go to: Yalla Apps Marketplace Policy Updates: Free App Marketplace Submission upped to 100 and other news Microsoft has been revisiting a few of our Marketplace policies based on feedback from developers to reduce friction and cost, word for word: 1. We have raised the limit on the number of certifications that can be performed for FREE apps at no cost to the registered developer from five to 100. This was a common request from developers which we are glad to implement after building alternate methods to ensure that users can find and download high quality apps. 2. We have converted policy 5.6 - related to the inclusion of contact information for support - from a mandatory to an optional policy. This is still a strongly recommended best practice, but we recognized and responded to developer feedback that this policy was creating excessive drag on the certification process for developers without commensurate user benefit for all apps. 3. We also understand the desire for clarification with regard to our policy on applications distributed under open source licenses.  The Marketplace Application Provider Agreement (APA) already permits applications under the BSD, MIT, Apache Software License 2.0 and Microsoft Public License.  We plan to update the APA shortly to clarify that we also permit applications under the Eclipse Public License, the Mozilla Public License and other, similar licenses and we continue to explore the possibility of accommodating additional OSS licenses. Enjoy and happy coding! Official Blog Post for reference.

    Read the article

  • Mixing Forms and Token Authentication in a single ASP.NET Application

    - by Your DisplayName here!
    I recently had the task to find out how to mix ASP.NET Forms Authentication with WIF’s WS-Federation. The FormsAuth app did already exist, and a new sub-directory of this application should use ADFS for authentication. Minimum changes to the existing application code would be a plus ;) Since the application is using ASP.NET MVC this was quite easy to accomplish – WebForms would be a little harder, but still doable. I will discuss the MVC solution here. To solve this problem, I made the following changes to the standard MVC internet application template: Added WIF’s WSFederationAuthenticationModule and SessionAuthenticationModule to the modules section. Add a WIF configuration section to configure the trust with ADFS. Added a new authorization attribute. This attribute will go on controller that demand ADFS (or STS in general) authentication. The attribute logic is quite simple – it checks for authenticated users – and additionally that the authentication type is set to Federation. If that’s the case all is good, if not, the redirect to the STS will be triggered. public class RequireTokenAuthenticationAttribute : AuthorizeAttribute {     protected override bool AuthorizeCore(HttpContextBase httpContext)     {         if (httpContext.User.Identity.IsAuthenticated &&             httpContext.User.Identity.AuthenticationType.Equals( WIF.AuthenticationTypes.Federation, StringComparison.OrdinalIgnoreCase))         {             return true;         }                     return false;     }     protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)     {                    // do the redirect to the STS         var message = FederatedAuthentication.WSFederationAuthenticationModule.CreateSignInRequest( "passive", filterContext.HttpContext.Request.RawUrl, false);         filterContext.Result = new RedirectResult(message.RequestUrl);     } } That’s it ;) If you want to know why this works (and a possible gotcha) – read my next post.

    Read the article

  • I can't install Ubuntu 12.04.1 on iMac G5

    - by user89004
    So, I have this iMac G5 that doesn't have iSight, only a small light sensor I think undernieth, machine model 8.2. I tried burning a Ubuntu 12.04.1 PowerPC 64bit .iso to a cd but the computer just won't boot it, I don't know why. Next I tried with a USB but it wouldn't let me boot that either, I created the usb on my dad's win7 laptop as the process was way easier than on freakin Mac or Ubuntu (no command typing AT ALL on windows) I'm able to get into openfirmware and type boot usb and it does show some weird writing that scrolls so fast I can't see anything and then it just gives me this huge no sign like a stop sign and freezez. The sign is grey and the line in the middle is tilted towards the left. An other issue I'm having with hdiutil is that I can't convert the stupid .iso I just downloaded into a .img because the file keeps on dissapearing right when it's done converting it. I used the syntax from Ubuntu support how to create a bootable usb drive under Mac OS X. I even didn't include the 2 stupid ~ that are shown in the syntax that are completly worthless, God only know why they put them there, and I even tried running the whole thing as root with sudo su before the command. The funny thing is that if I convert something smaller it works. The command I was using is hdiutil convert -format UDRW -o /path/to/target.img /path/to/ubuntu.iso I even tried hdiutil convert /path/to/ubuntu.iso -format UDRW -o /path/to/target.img but the same thing happens, the dummy .img.dmg file dissapears when the conversion is done no matter where I set the output file to go. I have tried several different folders, the same thing happens with all of them. I also tried burning a Ubuntu mini iso on a cd, can't remember if it was 11.10 or 12.10 but even thoguh holding c when the iMac boots up does show me the cd and I can boot from it, I get this weird error upon hitting install, it says something like invalid memory access, release keys and error strings I can't read. I don't have any original DVDs from this iMac and can't run hardware diagnostics. WHatever option I try at the command prompt from the mini ubuntu cd I get the same result, error code and openfirmware backdrop that's frozen. I noticed that the pen drive I created on my dads Win7 laptop is formated with MS-DOS but I can still mount it no problem, so it shouldn't have a problem booting it, right? I used the advice on ubuntu.com to make it, from here. Also, my partition is HFS+ so I can't use it as a hard drive and boot from it. I don' have 2 partitions either, just one HDD, one partition. Please help!!!

    Read the article

  • Asynchronously returning a hierarchal data using .NET TPL... what should my return object "look" like?

    - by makerofthings7
    I want to use the .NET TPL to asynchronously do a DIR /S and search each subdirectory on a hard drive, and want to search for a word in each file... what should my API look like? In this scenario I know that each sub directory will have 0..10000 files or 0...10000 directories. I know the tree is unbalanced and want to return data (in relation to its position in the hierarchy) as soon as it's available. I am interested in getting data as quickly as possible, but also want to update that result if "better" data is found (better means closer to the root of c:) I may also be interested in finding all matches in relation to its position in the hierarchy. (akin to a report) Question: How should I return data to my caller? My first guess is that I think I need a shared object that will maintain the current "status" of the traversal (started | notstarted | complete ) , and might base it on the System.Collections.Concurrent. Another idea that I'm considering is the consumer/producer pattern (which ConcurrentCollections can handle) however I'm not sure what the objects "look" like. Optional Logical Constraint: The API doesn't have to address this, but in my "real world" design, if a directory has files, then only one file will ever contain the word I'm looking for.  If someone were to literally do a DIR /S as described above then they would need to account for more than one matching file per subdirectory. More information : I'm using Azure Tables to store a hierarchy of data using these TPL extension methods. A "node" is a table. Not only does each node in the hierarchy have a relation to any number of nodes, but it's possible for each node to have a reciprocal link back to any other node. This may have issues with recursion but I'm addressing that with a shared object in my recursion loop. Note that each "node" also has the ability to store local data unique to that node. It is this information that I'm searching for. In other words, I'm searching for a specific fixed RowKey in a hierarchy of nodes. When I search for the fixed RowKey in the hierarchy I'm interested in getting the results FAST (first node found) but prefer data that is "closer" to the starting point of the hierarchy. Since many nodes may have the particular RowKey I'm interested in, sometimes I may want to get a report of ALL the nodes that contain this RowKey.

    Read the article

  • Highlights From Interact '12 - Healthcare Industry User Group

    - by John Webb
    Last week the Oracle team traveled to Orlando for the 18th annual Healthcare Industry User Group (HIUG) conference, Interact '12.   HIUG has over 3,000 members representing 180 organizations.  While we now know the result on the SCOTUS ruling yesterday, the consensus at the conference last week was summed up well in the welcome note from HIUG President, Chris Ryzewski:    "Regardless of the legal ruling on this administration's  Patient Protection and Affordable Care Act we will undoubtedly be called upon to further reduce costs and be more efficient in every aspect of our business processes."    Well put!   Attendance exceeded previous years with several hundred attendees, over 100 sessions, and a trade show that numbered 40 booths.    Most of the HIUG members use PeopleSoft applications and they tend to be full suite customers who use PeopleSoft broadly from HCM to Financials and Supply Chain. For many customers who have licensed PeopleSoft in the last year, it was their first experience with a very strong and collaborative user group.   I had dinner with a provider who is rolling out PeopleSoft HCM and ERP to a nationwide system of forty hospitals.  A key driver for this organization and others is how to leverage PeopleSoft applications to meet the cost reduction goals mentioned above.   In the area of procurement, the topic of Supplier Contract Management attracted a lot of attention.  Contract pricing and adherence to contracts throughout the procure to pay life cycle are key to meeting cost containment objectives.  Customers were excited to see the new faceted search capabilities and usability of  the upcoming PeopleSoft eProcurement release.     The new Work Center concept was discussed in several areas including the Cost Reconciliation Work Center and the Supply Demand Work Center which enables healthcare specific functions around PAR counts and related replenishment activities.  The latest Feature Pack of HCM 9.1 was demonstrated with the Talent Summary and Manager Dashboard.   Customers were excited to see the major advances in self service available today.    The Grants Special Interest Group focused quite a bit on the usage of PeopleSoft's Project Costing "Funds Distribution" feature, which can be used to manage capital projects funded by multiple agencies and sources.  Along with the latest release of the Mobile Inventory solution that several hospitals have now implemented, a preview of new mobile applications for expenses and approvals drew a lot of attention.   The PeopleSoft focus on assisting these companies in their goals to contain costs and create new efficiencies continues forward.   We look foward to Interact '13!     

    Read the article

< Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >