Search Results

Search found 19915 results on 797 pages for 'software patent'.

Page 576/797 | < Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • Trying to install Proprietory Nvidia Graphics Drivers

    - by Peter Snow
    After reading and trying many different suggestions for some hours, I returned to this how-to: https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia The first problem I encounter is how to identify which of the listed drivers support my Nvidia GEForce 630M graphics card. Following the links doesn't really help, since it is not stated there either (except where support for a new driver was added later which is explicitly stated, but the original devices covered are not). However, even if I knew, if it doesn't appear in the 'Additional Drivers' dialogue (see below), how will I install it? Second Issue: The article goes on to say that available drivers for my hardware are usually listed in 'Additional Drivers'. In my case, they aren't. Unfortunately, it doesn't tell me how to correct that or work around it? I've checked the bios and there is no way offered there to disable the integrated graphics, only the Nvidia graphics. I've also tried each available option in this: $ sudo update-alternatives --config i386-linux-gnu_gl_conf My system is an Acer Aspire 4752G bought May 2012. I'm running Ubuntu 12.04LTS. uname -a : 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux It's 64bit hardware but I installed 32bit OS for greater software compatibility. Running $ sudo tail -fn 500 /var/log/Xorg.0.log | grep '(EE)' returns" (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.886] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) The reason for wanting the proprietor y drivers is because my laptop comes with 3D accelerated graphics adaptor and so rather than confining myself to struggling with the on-board graphics, I would rather use it. I also want to experiment with using it for bitmining (which uses the GPU's for computing power).

    Read the article

  • Remember way back when we had a free decompiler?

    - by Justin Jones
    I, like probably so many of the rest of you, was mortified when Reflector was sold to RedGate. I knew where it was going. Suddenly you had to install it instead of just download and run it. I had a deep down feeling that one of the most useful tools in my arsenal was about to become a corporate product and no longer belong to the world of free tools. Sure enough it did. For a while now I’ve limped by without my favorite decompiler. This was made a little easier by the fact that you can now debug into the .net framework, but I still missed Reflector. JetBrains, makers of the superawesome and well worth the cost ReSharper (no it’s not free) have made their own decompiler that is comparable with Reflector, and it’s free. It’s still a corporate product, and JetBrains isn’t exactly known for making free software, but for now we have an option back on the table until some other industrious developer makes the next Reflector. dotPeek can be downloaded here.  http://www.jetbrains.com/decompiler/

    Read the article

  • How to adjust the appearance of the Unity in 12.10?

    - by piedro
    Now I updated to 12.10 and would like to adjust the desktop, well unity, appearance. I know there is the theme setting, but I cannot adjust the symbol theme or windows decoration with the systemsettings. I used to use the tool "unsettings" but it doesn't work with 12.10 anymore. Ubuntu Tweak used to be an option but at this point many features are broken and a lot of settings seem to mess up my system or they don't change anything at all (I understand that there has been a design settings change - gsettings, dconf, something ...) myunity has some options to change stuff but I couldn't find it for 12.10 ... not to forget "gnome-tweak-tool" which seems to work for most settings but not for all, e.g. it doesn't change the mouse cursor and the windows decorations do not show some decorations I'd like to use and I am also afraid of messing things up because it is supposed to be used in gnomeshell ... actually as I found out right now it really messes things up: fonts get inverted, suddenly high contrast accessibility setings are used in some windows, nautilus has white fonts on white background and even the login manager is a mess now ... So: How can I adjust the theme, symbol, decorations, fonts for the normal user and for the desktop and for the applications including the applications started as sudo user? I should mention that I upgraded from 12.04 and that some applications like synaptic completely ignore any settings ... sadly it is a mess, there was a time when gnome theming was really well done and very adjustable, I wonder what happened ... Just now I read that further development of Ubuntu Tweak has been stopped. The developer announced that he won't go any further with the software and the online services ... That is sad and destroys my hope for easy appearance editing just by waiting ... has been such a nice tool for 12.04 ... r.i.p.

    Read the article

  • IPv6 connections routed to IPv4 device

    - by Yvan JANSSENS
    I have an IBM 9406-250 with V5R1 and IPv4 only connectivity, and want it to be reachable over IPv6. I cannnot install an IPv6 stack on it, but I want it to be accessible by IPv6 so I can drop the requirement to VPN to my home network. I have an OpenWRT device running, which takes care of the IPv6 routing on my network and the tunnel to SIXXS, and I was wondering if it is possible to assign another IPv6 address to that device, and route it to the IPv4 IBM computer. Which software do I need for this, and how is this technique called?

    Read the article

  • In Windows XP, is it possible to disable user credential caching for particular users

    - by kdt
    I understand that when windows caches user credentials, these can sometimes be used by malicious parties to access other machines once a machine containing cached credentials is compromised, a method known as "pass the hash"[1]. For this reason I would like to get control over what's cached to reduce the risk of cached credentials being used maliciously. It is possible to prevent all caching by zeroing HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount, but this is too indiscriminate: laptops users need to be able to login when away from the network. What I would like to do is prevent the caching of credentials of certain users, such as administrators -- is there any way to do that in Windows XP? http://www.lbl.gov/cyber/systems/pass-the-hash.html

    Read the article

  • Netgear VPN can't access specific server

    - by Critologist
    I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

    Read the article

  • Is there a way to disable specific Spybot Immunization rules?

    - by Iszi
    I've been having problems using a desktop sharing application, which I've traced to the Immunization protections applied via Spybot S&D. Specifically, the problem has been narrowed down to the rules in the \SOFTWARE (Plugins) categories under the Internet Explorer groups. Once I disable these Immunization categories, everything in the application works fine. Each of these categories appears to include ~900 protections on the system. I suspect that the root cause of my problems could be narrowed down to just one, or perhaps a handful, of the settings that get applied in these categories. However, I can't find any options in Spybot S&D which would allow me to drill down to the individual protection rules and choose which to enable or disable. Is there something I'm missing, or is this not a feature available via the GUI? If it's not strictly supported in the application, is there a way to work around it by manually editing some of its files or registry settings? Spybot S&D version: 2.2.21.0 Spybot Start Center version: 2.2.21.129 Windows Ultimate x64

    Read the article

  • KB980408: Fix for Explorer freezing: does anyone know what app caused it?

    - by Ian Boyd
    Microsoft released an update for Windows 7 today (Tuesday, April 27, 2010): KB980408: The April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available. The update fixes, among other things: Windows Explorer may stop responding for 30 seconds when a file or a directory is created or renamed after certain applications are installed. i'm not experiencing it on my own Windows 7 machine, but two colleagues at work were experiencing the problem. i would really like to know what applications were causing problems. Microsoft will never call out the misbehaving applications. i want to know what software i should be ridiculing and insulting. And avoid in the future. Did anyone who was experiencing this problem isolate the applications?

    Read the article

  • I've inherited 200K lines of spaghetti code -- what now?

    - by kmote
    I hope this isn't too general of a question; I could really use some seasoned advice. I am newly employed as the sole "SW Engineer" in a fairly small shop of scientists who have spent the last 10-20 years cobbling together a vast code base. (It was written in a virtually obsolete language: G2 -- think Pascal with graphics). The program itself is a physical model of a complex chemical processing plant; the team that wrote it have incredibly deep domain knowledge but little or no formal training in programming fundamentals. They've recently learned some hard lessons about the consequences of non-existant configuration management. Their maintenance efforts are also greatly hampered by the vast accumulation of undocumented "sludge" in the code itself. I will spare you the "politics" of the situation (there's always politics!), but suffice to say, there is not a consensus of opinion about what is needed for the path ahead. They have asked me to begin presenting to the team some of the principles of modern software development. They want me to introduce some of the industry-standard practices and strategies regarding coding conventions, lifecycle management, high-level design patterns, and source control. Frankly, it's a fairly daunting task and I'm not sure where to begin. Initially, I'm inclined to tutor them in some of the central concepts of The Pragmatic Programmer, or Fowler's Refactoring ("Code Smells", etc). I also hope to introduce a number of Agile methodologies. But ultimately, to be effective, I think I'm going to need to hone in on 5-7 core fundamentals; in other words, what are the most important principles or practices that they can realistically start implementing that will give them the most "bang for the buck". So that's my question: What would you include in your list of the most effective strategies to help straighten out the spaghetti (and prevent it in the future)?

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • Do I need to run a verfication on LTO tape backups even though the drives themselves perform verification as they write?

    - by ObligatoryMoniker
    We have an LTO-3 Tape drive in a Dell media library that we use for our tape backups. The article about LTO on Wikipedia states that: LTO uses an automatic verify-after-write technology to immediately check the data as it is being written, but some backup systems explicitly perform a completely separate tape reading operation to verify the tape was written correctly. This separate verify operation doubles the number of end-to-end passes for each scheduled backup, and reduces the tape life by half. What I would like to know is, do I need my backup software (Backup Exec in this case) to perform a verify on these tapes or is the verify-after-write technology inherent in LTO drives sufficient? I would also be curious if Backup Exec understands the verify-after-write technology enough to alert me if that technology couldn't veryify the data or will it just ignore it making it useless anyway since even if the drive detecs a problem I would never know about it.

    Read the article

  • FTP error when doing file transfer

    - by Ernie
    I'm running vsftpd version 3.0.2 over FTPeS, and I'm having a bit of trouble with file transfers. It seems to work fine when I'm on the LAN, but not from an external IP address. I have the control port and data ports open on my server's software firewall and my router's firewall. When I'm using the service from an external IP address, it seems like sometimes a file transfer will complete, but it times out and I always get the client error: "426 Failure writing network stream". I've tried several clients. I'm thinking there is some sort of data sabotage either at the router or some server policy; maybe because I'm using passive ftp? Suggestions?

    Read the article

  • Can a named (bind) crash make a server unreachable?

    - by giorgio79
    My server recently became unreachable, and after restart a named error was the last line I found in /var/log/messages before restart: Jun 26 00:15:06 host named[1303]: error (network unreachable) resolving 'dlv.isc.org/DNSKEY/IN': 2001:500:71::29#53 Jun 26 06:38:55 host kernel: imklog 5.8.10, log source = /proc/kmsg started. Jun 26 06:38:55 host rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1294" x-info="http://www.rsyslog.com"] start Jun 26 06:38:55 host kernel: Initializing cgroup subsys cpuset Can a named crash make a server unreachable? I doubt it, as I assume I should still be able to login with ssh via IP, but the server did not respond...So, I am trying to make heavy guesses here.

    Read the article

  • what languages are good selling points on resume? [closed]

    - by Thomas Galvin
    I have a good amount of experience with C# and Java at the moment but after education and whatnot I wish to be able in more than just 2 high-level, comparatively limited languages, and from what I've seen languages like C(++) or PHP are in demand at the moment. I've thought about learning the following: C. Very standard, lightweight and available on everything. However very old and mostly procedural. C++. Standard like C but I've read in some places that it encourages bad programming design and use of dodgy libraries - but similar things have been said about C too so I'll take that with a grain of salt. D. Quite new but looks promising, but will it be relevant or applicable in the future though? PHP. With the internet becoming ever more important I think this might be the one to go with, but the code itself isn't very intuitive. CoffeeScript (or plain JavaScript). With Microsoft's new idea of HTML5+JS for everything under the sun this doesn't look like a bad choice. However things do change and I wish to be primarily a software dev, not web dev. So out of the above list, or any others that you could suggest, what would you say I should begin to focus on? What is your opinion on staying with C#?

    Read the article

  • Windows 7 wifi reports "no network access" and "no internet access" but connects in fedora

    - by rick2047
    I am running windows 7 home basic (64bit) on a Acer 5742G laptop with Atheos wifi adapter in it. Yesterday, I hiberneted my computer as I always do and up untill then the wifi was working fine. When I booted my computer up again today I started having a strange problem: It detects my wifi but after connecting to it, it keeps on oscillating between states of no network access and no internet access. I can't connect to anything (the internet or my router). I tried to reset my internet protocol stack using this fixit file. I also tried to uninstall and reinstall my network driver. Neither helped. I am using the same laptop's fedora installation right now and the wifi is working perfectly fine. Please help. Edit To add additional details, I have Microsoft Security essentials as my antivirus software and I haven't messed with the firewall or the router configurations.

    Read the article

  • What does Libre Office do to an existing Excel sheet to bloat its size?

    - by Sn3akyP3t3
    I try to avoid using Libre Office on existing Excel created workbooks because of the potential for unpleasant results. In this case Libre Office bloated the size of the workbook for some reason unknown to me. I would like to know if Libre Office does this to all Excel workbooks or just something in that workbook that causes it. Software involved: Microsoft Office Excel 2010 Libre Office 3.5.x (exact version unknown) Dropbox (merely to sync changes) Platforms involved: Office on Windows (master of the obvious on that one I suppose..) Libre Office on Mac OS 10.6 Types of data stored in this workbook: Text Integers 1 column with a simple formula spanning the entire worksheet representing that particular row (=CONCATENATE(A2285,B2285,D2285), =CONCATENATE(A2286,B2286,D2286), etc.) Total of 3,500 plus rows Here is a photo with details described within, but I'll go ahead and explain the photo as well: This screenshot is from Dropbox history of the .xlsx workbook. Version 61 - 68 were Office Excel. Version 69 - 73 were Libre Office.

    Read the article

  • How to Manage and Use LVM (Logical Volume Management) in Ubuntu

    - by Justin Garrison
    In our previous article we told you what LVM is and what you may want to use it for, and today we are going to walk you through some of the key management tools of LVM so you will be confident when setting up or expanding your installation. As stated before, LVM is a abstraction layer between your operating system and physical hard drives. What that means is your physical hard drives and partitions are no longer tied to the hard drives and partitions they reside on. Rather, the hard drives and partitions that your operating system sees can be any number of separate hard drives pooled together or in a software RAID Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

    Read the article

  • Backing up Windows 2003 Server that has Certificate Authority

    - by Dina
    I want to export and migrate a Certificate Authority CA role from a Windows 2003 machine to a new copy of Windows 2008 R2 virtual machine. I was told that I cannot have 2 CA roles on the same network at the same time. Therefore, I must first export the certificates on the older machine, delete the CA role, then add the CA role on the new machine and import the certificates into it. As a safety precaution, I am tasked to find a backup solution in case this does not work and I need to revert back to the old Windows 2003 CA. My question is: What is the best software for doing this type of backup? I am currently trying out Symantec Backup Exec 2012. Which I hope will allow me to create a backup prior to removing CA role on Windows 2003. If this CA migration fails, the backup will allow me to revert the old machine to a time before I removed its CA role.

    Read the article

  • How to reliably synchronise file servers between London and Shanghai?

    - by Andy S
    We have two offices, one in London and one in Shanghai, each needing to be able to access the same set of files. This means we need a solid, speedy means of synchronising a set of folders between servers at either office. They're likely to be Windows servers, but we could look at Linux boxes if the software side makes more sense on *nix. We've considered Rsync, Unison, Gluster, and a few other options, but none of them seem capable of reliably keeping the servers in sync between such distant office locations. Each office is on DSL connectivity over the open internet, so encryption is also a factor. Does anyone have any hints for getting the servers synchronising in as close to real time as possible, without dying constantly? Andy

    Read the article

  • LAN cable not connected, but it is

    - by Koen
    I have a Windows XP SP2 desktop PC. It connects to the internet with a LAN cable (there's a wireless router for my laptop in between). The problem should be software because: when i tried connecting the same LAN cable to my laptop it works when i plugin the LAN cable (onboard) the green light is on and the orange light flickers when i tried the other cable (that feeds the wireless router) i have the same problem it worked a few days ago, nothing specific changed I tried removing the ethernet card from the device manager, and windows automatically reinstalled it. What could cause this? What can I try?

    Read the article

  • Sponsored Giveaway: Free Copies of WinX DVD Copy Pro for All How-To Geek Readers

    - by The Geek
    Have you ever wanted to make a backup of a DVD, or even rip it to an ISO file to use on your computer without the original optical disc? You can use WinX DVD Copy Pro to make this happen, and we’ve got a giveaway for all HTG readers. To get your free copy, just click through the following link to download and get the license code, as long as you download it by December 20th. In addition, an iPhone / iPad Video Software Pack will be presented as the second round gift from December 21st to January 2nd, 2013. For Windows users: http://www.winxdvd.com/giveaway/ WinX DVD Copy Pro has many features, including this list, which we copied straight from their site: Supports latest released DVDs. Protect your DVD disc from damage. Copy DVD to DVD, ISO image, etc. 9 advanced DVD backup schemes. Support Disney’s Fake, scratched DVDs and Sony ARccOS bad sector. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • How can I anonymize my browser useragent, yet still be counted as a FF/Ubuntu user?

    - by Rory
    I read about EFF's Panopticlick project to see how unique your webbrowser's headers are. I would like to anonymize that a bit. My current User Agent is Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.7) Gecko/20100106 Ubuntu/9.10 (karmic) Firefox/3.5.7 I would like to make that more anonymous, however I still wanted to be counted as a Firefox and Ubuntu user. How can I change my User Agent in Firefox? What should I change it to so that it's less unique, but will be counted as a Firefox user and a Ubuntu user on web analytics software? I know that there is no guarantee that I will be counted a Firefox/Ubuntu user, just something that 'works most of the time' would be sufficent.

    Read the article

  • What should I do when my team leader is unfair for no reason? [closed]

    - by crucified soul
    I'm a new software developer and this is my first job. It's a startup and the CEO and the working environment is just great. I work really hard and I believe that I also do my job well. But recently, I have felt like my team leader is being unfair to me for no reason. It appears that he is nice to my co-workers, but not me. I figure he is mad at me, but I didn't bother to find out why. I really love this company and I really love working there. But if my team leader continues to be unfair then I have no option other than leaving. How can I fix this? EDIT: The other day he called me into his office and wanted to see my work in the afternoon (Yes, in my country, at summer season after 5PM is afternoon. My office begins at 8AM. And I'm not saying I've problems to work after 5PM). At the time I was facing a weird runtime error and I was pretty tired. I explained the situation to him. Then he found a small logical error in my code and asked me why I didn't fix this. I told him I was trying to resolve this runtime error and that I was sure that this logical error had nothing to do with the runtime error. He then proceeded to yell at me. After fixing the logical error that runtime error was still there. This is not the only occasion he has been unfair to me. I'm saying is being unfair because he doesn't do this kind of thing to other developers when they do really silly mistakes.

    Read the article

  • What kind of hosting do I need?

    - by Robert Smith
    I migrated this question from serverfault. Hopefully this is the appropriate place. I have been trying to answer this question but I haven't found an specific answer to my situation. As I want to pay for what I need, I thought I could get a good answer here. I have a custom made forum (rather than a built-in forum like the ones you can find in plugins, e.g. WP-Forum or phpBB type of software) in Django. I don't want to use Apache and modwsgi because it's usually very memory-hungry and I can't afford a big server. I prefer a combination of nginx and gunicorn which I think is very efficient (maybe you can also tell me what you think about that). I'm expecting to receive 10,000 to 20,000 visits each month with 15,000 to 30,000 page impressions. I have reviewed some cloud services like Amazon EC2 or Rackspace and other more traditional services (Linodo). This site won't use videos or big images and I certainly don't need a huge amount of bandwidth (200GB would be definitely too much). I need shell access so shared hosting is out of the question. What do I need to run a website like that without problems? What about RAM? 256MB would be enough (that's the amount of RAM offered by small instances in Amazon and Rackspace)? Do you know of any alternative to those I mentioned? If you need more information to provide a useful answer, please don't hesitate to ask. By the way, I was told that Linodo is not all that different to Amazon EC2 but this website is supposed to work 24/7, so I can't take advantage of Linodo's flexibility regarding creating and deleting instances. Thanks in advance.

    Read the article

< Previous Page | 572 573 574 575 576 577 578 579 580 581 582 583  | Next Page >