Search Results

Search found 18803 results on 753 pages for 'link to'.

Page 579/753 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

• Uninstalling with Ubuntu Software Center doesn't work on Ubuntu 12.04.1 64bit

  - by likethesky

  Not sure if I'm doing something wrong, or if the .deb package I'm installing is broken in some way (I've built it, using NetBeans 7.2), or if indeed this is a bug in Software Center. When I install this particular 32-bit .deb on Ubuntu 10.04 LTS--all updates applied--(where it was built), GDebi shows it and has an 'Uninstall' button next to it. So it works fine to uninstall it there, via the GDebi GUI. However, when I install it on 12.04.1 LTS--all updates applied--it installs fine, but then does not show up in Ubuntu Software Center as available to be uninstalled. No combination of searching finds it. However, I can from the command line, do sudo apt-get purge javafxapplication1 and it finds it and deletes it. The same thing happens when I build a 64-bit .deb and attempt to install it to the same (64-bit AMD) or a different 64-bit Ubuntu 12.04.1 system. So it seems to be isolated to this NetBeans-generated .deb and the 64-bit AMD build (though I haven't tried it on a 32-bit 12.04.1 install yet). These are all on VirtualBox VMs, btw, if that matters. Any way to clean up my Software Center and see if it's something I've done to get it in this state? Could this behavior be due to how this particular .deb has been built? (It doesn't have an 'Installed-Size' control field, so I do get the "Package is of bad quality" warning when I install it--which I do by clicking 'Ignore and install' button.) If you want all the gory details about why this happening--a bug has been reported against NetBeans for this behavior here: http://javafx-jira.kenai.com/browse/RT-25486 (EDIT: Just to be clear, the app installs fine, runs fine, all works as intended--I just can't get that 'bad package' message to go away, and now... I also can't uninstall it via Software Center, but rather, need to use sudo apt-get purge to uninstall it, after it installs.) Thanks for any pointers. I'm happy to report this as a bug against Ubuntu Software Center/Centre too, if that's what it seems to be, just tell me where to do so (a link). I'm a relative Ubuntu, NetBeans, and JavaFX newbie, though a long-time programmer. If I report it as a bug, I'll try it on the 32-bit build of 12.04.1 as well. Also, if I should add any more detail to the bug reported against NetBeans above, let me know--or feel free to add it yourself to the bug report above, if you would like. Thanks again!

  Read the article

• Canonicalization of single, small pages like reviews or product categories

  - by Valorized

  In general I pretty much like the idea of canonicalization. And in most cases, Google explains possible procedures in a clear way. For example: If I have duplicates because of parameters (eg: &sort=desc) it's clear to use the canonical for the site, provided the within the head-tag. However I'm wondering how to handle "small - no to say thin content - sites". What's my definition of a small site? An Example: On one of my main sites, we use a directory based url-structure. Let's see: example.com/ (root) example.com/category-abc/ example.com/category-abc/produkt-xy/ Moreover we provide on page, that includes all products example.com/all-categories/ (lists all products the same way as in the categories) In case of reviews, we use a similar structure: example.com/reviews/product-xy/ shows all review for one certain product example.com/reviews/product-xy/abc-your-product-is-great/ shows one certain review example.com/reviews/ shows all reviews for all products (latest first) Let's make it even more complicated: On every product site, there are the latest 2 reviews at the end of the page. So you see, a lot of potential duplicates. Q1: Should I create canonicals for a: example.com/category-abc/ to example.com/all-categories/ b: example.com/reviews/product-xy/abc-your-product-is-great/ to example.com/reviews/product-xy/ or to example.com/review/ or none of them? Q2: Can I link the collection of categories (all-categories/) and collection of all reviews (reviews/ and reviews/product-xy/) to the single category respectively to the single review. Example: example.com/reviews/ includes - let's say - 100 reviews. Can I somehow use a markup that tells search engines: "Hey, wait, you are now looking at a collection of 100 reviews - do not index this collection, you should rather prefer indexing every single review as a single page!". In HTML it might be something like that (which - of course - does not work, it's only to show you what I mean): <div class="review" rel="canonical" href="http://example.com/reviews/product-xz/abc-your-product-is-great/"> HERE GOES THE REVIEW</div> Reason: I don't think it is a great user experience if the user searches for "your product is great" and lands on example.com/reviews/ instead of example.com/reviews/product-xy/abc-your-product-is-great/. On the first site, he will have to search and might stop because of frustration. The second result, however, might lead to a conversion. The same applies for categories. If the user is searching for category-Z, he might land on the all-categories page and he has to scroll down to the (last) category, to find what he searched for (Z). So what's best practice? What should I do?

  Read the article

• Finding the Twins when Implementing Catmull-Clark subdivision using Half-Edge mesh [migrated]

  - by Ailurus

  Note: The description became a little longer than expected. Do you know a readable implementation of this algorithm using this mesh? Please let me know! I'm trying to implement Catmull-Clark subdivision using Matlab (because later on the results have to be compared with some other stuff already implemented in Matlab). First try was with a Vertex-Face mesh, the algorithm works but it is of course not very efficient (since you need neighbouring information for edges and faces). Therefore, I'm now using a Half-Edge mesh (info), see also the paper of Lutz Kettner. Wikipedia link to the idea behind Catmull-Clark SDV: Wiki. My problem lies in finding the Twin HalfEdges, I'm just not sure how to do this. Below I'm describing my thoughts on the implementation, trying to keep it concise. Half-Edge mesh (using indices to Vertices/HalfEdges/Faces): Vertex (x,y,z,Outgoing_HalfEdge) HalfEdge (HeadVertex (or TailVertex, which one should I use), Next, Face, Twin). Face (HalfEdge) To keep it simple for now, assume that every face is a quadrilateral. The actual mesh is a list of Vertices, HalfEdges and Faces. The new mesh will consist of NewVertices, NewHalfEdges and NewFaces, like this (note: Number_... is the number of ...): NumberNewVertices: Number_Faces + Number_HalfEdges/2 + Number_Vertices NumberNewHalfEdges: 4 * 4 * NumberFaces NumberNewfaces: 4 * NumberFaces Catmull-Clark: Find the FacePoint (centroid) of each Face: --> Just average the x,y,z values of the vertices, save as a NewVertex. Find the EdgePoint of each HalfEdge: --> To prevent duplicates (each HalfEdge has a Twin which would result in the same HalfEdge) --> Only calculate EdgePoints of the HalfEdge which has the lowest index of the Pair. Update old Vertices Ok, now all the new Vertices are calculated (however, their Outgoing_HalfEdge is still unknown). Next step to save the new HalfEdges and Faces. This is the part causing me problems! Loop through each old Face, there are 4 new Faces to be created (because of the quadrilateral assumption) First create the 4 new HalfEdges per New Face, starting at the FacePoint to the Edgepoint Next a new HalfEdge from the EdgePoint to an Updated Vertex Another new one from the Updated Vertex to the next EdgePoint Finally the fourth new HalfEdge from the EdgePoint back to the FacePoint. The HeadVertex of each new HalfEdge is known, the Next HalfEdge too. The Face is also known (since it is the new face you're creating!). Only the Twin HalfEdge is unknown, how should I know this? By the way, while looping through the Vertices of the new Face, assign the Outgoing_HalfEdge to the Vertices. This is probably the place to find out which HalfEdge is the Twin. Finally, after the 4 new HalfEdges are created, save the Face with the HalfVertex index the last newly created HalfVertex. I hope this is clear, if needed I can post my (obviously not-yet-finished) Matlab code.

  Read the article

• Compute directional light frustum from view furstum points and light direction

  - by Fabian

  I'm working on a friends engine project and my task is to construct a new frustum from the light direction that overlaps the view frustum and possible shadow casters. The project already has a function that creates a frustum for this but its way to big and includes way to many casters (shadows) which can't be seen in the view frustum. Now the only parameter of this function are the normalized light direction vector and a view class which lets me extract the 8 view frustum points in world space. I don't have any additional infos about the scene. I have read some of the related Questions here but non seem to fit very well to my problem as they often just point to cascaded shadow maps. Sadly i can't use DX or openGl functions directly because this engine has a dedicated math library. From what i've read so far the steps are: Transform view frustum points into light space and find min/max x and y values (or sometimes minima and maxima of all three axis) and create a AABB using the min/max vectors. But what comes after this step? How do i transform this new AABB back to world space? What i've done so far: CVector3 Points[8], MinLight = CVector3(FLT_MAX), MaxLight = CVector3(FLT_MAX); for(int i = 0; i<8;++i){ Points[i] = Points[i] * WorldToShadowMapMatrix; MinLight = Math::Min(Points[i],MinLight); MaxLight = Math::Max(Points[i],MaxLight); } AABox box(MinLight,MaxLight); I don't think this is the right way to do it. The near plain probably has to extend into the direction of the light source to include potentional shadow casters. I've read the Microsoft article about cascaded shadow maps http://msdn.microsoft.com/en-us/library/windows/desktop/ee416307%28v=vs.85%29.aspx which also includes some sample code. But they seem to use the scenes AABB to determine the near and far plane which I can't since i cant access this information from the funtion I'm working in. Could you guys please link some example code which shows the calculation of such frustum? Thanks in advance! Additional questio: is there a way to construct a WorldToFrustum matrix that represents the above transformation?

  Read the article

• SQL Server PowerShell Provider follows the Version of PowerShell on the Host and other errata

  - by BuckWoody

  There may be some misunderstanding on how the PowerShell Provider for SQL Server works. I’ve written an article or two explaining that you can use PowerShell with SQL Server, without having the SQL Server 2008 (or higher) provider around. After all, PowerShell just uses .NET, and SQL Server “Server Management Objects” or SMO listen to that interface as well. In SQL Server 2008 and higher we created a “MiniShell” for PowerShell that gives you the ability to treat a SQL Server Instance as a drive (called a “Provider” or path or drive) and a few commands (called command-lets). Using these two simple constructs you can move around SQL Server quickly and work with the objects it holds. I read the other day where someone stated that we had “re-compiled” PowerShell, so that you would have version 1.0 from SQL Server and 2.0 on your new server. Not so! Drop to a SQLPS prompt and a PowerShell prompt and type this in each: $PSVersionTable They should return the same value. You can think of a MiniShell as simply a compiled “profile” that gives you those providers and command-lets automatically – that’s all. In fact, you can load the SMO libraries yourself without the SQL Server 2008 Provider anywhere in sight. I do this all the time, since the MiniShell also has other restrictions. Also remember that if you run a PowerShell script as a SQL Agent Job step type (in 2008 and higher) that you’re running under the context of the account that starts Agent – I think most folks know this, but it’s good to keep in mind. There’s a re-written section of Books Online that goes over working with this very nicely – also covers the question “How to I connect to another server using the SQL Server PowerShell Provider” (hint: It’s just CD) and “How do I load all the SMO stuff if I don’t want to use the Provider” and more. Be sure and check out the note at the bottom that explains the firewall exceptions you’ll need to enable to CD to that remote server. Here’s that link: http://msdn.microsoft.com/en-us/library/cc281947.aspx Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• URL routing similar to Facebook (related to AJAX and the URL)

  - by Guilherme Cardoso

  In this article i'm gonna show you how i do when i have to update some content with AJAX and i have to change the URL. First, let's see an example to understand it better. If the user is reading a News with Id 1 and he clicked on another News with Id 2, if we update the content with AJAX the user is now reading the News Id 2 but the URL remains the same, for example: http://localhost/News/Read/1 Now let's see another example from Facebook. If i'm reading my profile and i click on Photos, Facebook updates it with AJAX and the URL switch to: http://www.facebook.com/guilhermegeek#!/guilhermegeek?sk=photos If we enter on that URL, it's mapped to: http://www.facebook.com/guilhermegeek?sk=photos The trick here is the parameters that we use after the #!. Those parameters are never sent to the server side, so we handle them on the client side (javascript).In the example of Facebook, he receives my profile name (guilhermegeek) and the action is to read photos. A few time ago i've written an article in my Portuguese blog explaining how to use an alternative to clients with javascript disabled. Like this: <a onclick="javascript:ReadNews(id);" href="#!News/Read/@id/">Title</a> When the user enter the link of that news, my function Read(); fills the News in the page. Then, i add the #!News/Read/@id/ to my URL. It's gonna stay something like this: http://localhost/News/Read/1#!News/Read/2 As i explained before, the News that the user is reading has the Id 2.The next step is to use javascript to check if the URL that the user typed has other News Id, because if we enter on the above URL our controller will get the Id 1 (everything after to the # isn't sent to the server side). $(document).ready(function () {             var h = window.location.hash;             if (h != null) {                 var parts = window.location.href.split('#!');                 if (parts.length > 1) {                     window.location.replace("http://localhost/" + parts[1]);                 }             }    }); It's pretty simple. I'm cutting everything after the #!, then i redirect the user to a new page. So, it's gonna stay:http://localhost/News/Read/2

  Read the article

• Why no more macro languages?

  - by Muhammad Alkarouri

  In this answer to a previous question of mine about scripting languages suitability as shells, DigitalRoss identifies the difference between the macro languages and the "parsed typed" languages in terms of string treatment as the main reason that scripting languages are not suitable for shell purposes. Macro languages include nroff and m4 for example. What are the design decisions (or compromises) needed to create a macro programming language? And why are most of the mainstream languages parsed rather than macro? This very similar question (and the accepted answer) covers fairly well why the parsed typed languages, take C for example, suffer from the use of macros. I believe my question here covers different grounds: Macro languages or those working on a textual level are not wholly failures. Arguably, they include bash, Tcl and other shell languages. And they work in a specific niche such as shells as explained in my links above. Even m4 had a fairly long time of success, and some of the web template languages can be regarded as macro languages. It is quite possible that macros and parsed typing do not go well together and that is why macros "break" common languages. In the answer to the linked question, a macro like #define TWO 1+1 would have been covered by the common rules of the language rather than conflicting with those of the host language. And issues like "macros are not typed" and "code doesn't compile" are not relevant in the context of a language designed as untyped and interpreted with little concern for efficiency. The question about the design decisions needed to create a macro language pertain to a hobby project which I am currently working on on designing a new shell. Taking the previous question in context would clarify the difference between adding macros to a parsed language and my objective. I hope the clarification shows that the question linked doesn't cover this question, which is two parts: If I want to create a macro language (for a shell or a web template, for example), what limitations and compromises (and guidelines, if exist) need to be done? (Probably answerable by a link or reference) Why have no macro languages succeed in becoming mainstream except in particular niches? What makes typed languages successful in large programming, while "stringly-typed" languages succeed in shells and one-liner like environments?

  Read the article

• Why learn Flash Builder 4 (Flex) when I can just use Flash Professional?

  - by Jason McKenna

  I want to learn Flash Builder 4 (Flex) because I see so many jobs requesting experience with it. I also just like knowing stuff. I am also very interested in focusing on RIA development now. BUT... can anyone tell me CLEARLY why the heck I would ever use FLEX over Flash Pro? It is a time investment, so is it worth it? All I read are misguided posts about how Flash Pro is for games and banner ads, and Flex is for programmers and RIAs blah blah... this simply isn't so from my 9 years of contracting experience. I'm 99.9% certain that I can build anything a flex developer can build, but using Flash Pro. I can build powerful AS3-driven apps for the desktop, mobile device, or browser, and I can link to databases with XML and I can import text files and communicate with ColdFusion and everything. The advantage with Flash Pro is that I can also easily and clearly animate transitions and build custom elements that look the way I want/need them to look for my specific client. Why would I want to use a bunch of pre-built components that drive my file sizes to the moon? Who is happy with a drag-n-drop button? Is Flex just a thing made for programmer people with no artistic inclination? What is the advantage of using it? It takes me back to Visual Basic class. Seems like a pain to have to use multiple tools to import crap from Flash Pro into Flex and yada yada... why when I can do it all nicely in Flash Pro to begin with. Am I clueless, or missing some major piece of the puzzle? Thanks for any clarity. PS, I couldn't care less about the code editors. It ain't that bad people. They make it out like the thing doesn't even respond to keyboard input or something. Does everything I need it do anyways. Please help out here. If I just don't need to learn it, I don't want to waste the time.

  Read the article

• Thank you Geeks With Blogs for letting me join your community!

  - by GreeNTUG

  First, a link to the blog I can no longer edit because Office Live blew away my digital identity and so I can no longer log into it (the source of a loooong blog about protecting your digital identity sometime when I have more time and after it has played out to the end) http://greentug.spaces.live.com/ The following are the communities I participate in: Green & Sustainability.  I run a virtual user group on Green and Sustainability as it relates to developers and software architects.  It was located at greentug.groups.live.com, and we will need to find a new digital location for it, because I am locked out of that site as well. BizSpark Tampa Bay:  I run a BizSpark group for Microsoft technologists (meetup.com, search for BizSpark Tampa Bay) and speak at Code Camps about "No Better Time to Start Your Own Tech Business".  The meetup group facilitates a balanced presentation that is respectful to anyone wanting to start their own business, whether part-time or full-time, whether micro (just you), sustainable (grow to 2-25-ish, self-funded), high growth (get venture capital or other funding, grow it, sell it within 5 years, do it again), or hybrid (the new model going forward).  It is an "action" group, with assignments and homework if you want to get the most out of it.   At the end of a year you will either have your business on the path to where you want it to be, or you will know the steps you need to do to get it there. Women in Technology Have been participating in the Women in Technology community since 2008, my main interests in this area are mentoring women in the workplace to have them believe they can become geeks and double their income, and to mentor them with respect to starting and running their own business. Access 2010/SharePoint 2010.  This is a game-changer with respect to the Access community (the ap both devs and IT Pros love to hate, the other a-word that's not a fruit).  I conducted Lunch n Learns and Brunch n Learns around this topic before the Office 2010/SharePoint 2010 launch, and spoke on the topic at SharePoint Saturday Tampa in Nov 2009. Interested in learning more about: Using Silverlight HD Streaming out in the non-technical world (horses and equestrian sport).  Migrating to Access Web Services and VB .Net from VBA (see the Access 2010/SharePoint 2010 interest above) Windows Phone 7!  Exciting opportunities both for Green and Sustainability and for my "day job" of Environmental, Health & Safety (EHS). My day job is Environmental, Health & Safetey (EHS) consulting and software solutions, where that interfaces with the developer world is with respect to opportunities around Green and Sustainability, The SmartGrid and Juval Lowy's EnergyNet, both of which will require a lot of technology and software to make them work, The new Microsoft Partner competency for "Digital Home", and The Y2K kind of deadline around how managing chemicals in ERP systems is changing because of Global Harmonization, which hits the EU with a hard deadline on 11/30/10 (yes, this year), and hits the USA about 15 months later. Hope you enjoy my contributions to the digital geek community, and feel free to email me, [email protected] (the email leftover after my digital identity was blown away), and [email protected] (this one could go away at some future point) Best, Kathy Malone

  Read the article

• Error Copying Source File in Audio Spectrum Visualizer [closed]

  - by David Dimalanta

  I'm testing this code using LibGDX, Java, and Eclipse to test the music player that detects the frequency. I saw this one on this website plus the link on GitHub: http://gtomee.com/2012/07/28/audio-spectrum-visualizer-with-libgdx/ It works when running on desktop project folder but not on Android project folder and the result is this: 10-10 13:57:45.320: E/AndroidRuntime(9421): FATAL EXCEPTION: GLThread 16845 10-10 13:57:45.320: E/AndroidRuntime(9421): com.badlogic.gdx.utils.GdxRuntimeException: Error copying source file: soundtrack 1 bioman.mp3 (Internal) 10-10 13:57:45.320: E/AndroidRuntime(9421): To destination: tmp/audio-spectrum.mp3 (External) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.copyFile(FileHandle.java:625) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.copyTo(FileHandle.java:534) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.bodapps.rhythm.Drop.create(Drop.java:393) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.backends.android.AndroidGraphics.onSurfaceChanged(AndroidGraphics.java:292) 10-10 13:57:45.320: E/AndroidRuntime(9421): at android.opengl.GLSurfaceView$GLThread.guardedRun(GLSurfaceView.java:1505) 10-10 13:57:45.320: E/AndroidRuntime(9421): at android.opengl.GLSurfaceView$GLThread.run(GLSurfaceView.java:1240) 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: com.badlogic.gdx.utils.GdxRuntimeException: Error stream writing to file: tmp/audio-spectrum.mp3 (External) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:313) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.copyFile(FileHandle.java:623) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 5 more 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: com.badlogic.gdx.utils.GdxRuntimeException: Error writing file: tmp/audio-spectrum.mp3 (External) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:293) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:305) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 6 more 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: java.io.FileNotFoundException: /storage/sdcard0/tmp/audio-spectrum.mp3: open failed: EACCES (Permission denied) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.IoBridge.open(IoBridge.java:416) 10-10 13:57:45.320: E/AndroidRuntime(9421): at java.io.FileOutputStream.<init>(FileOutputStream.java:88) 10-10 13:57:45.320: E/AndroidRuntime(9421): at com.badlogic.gdx.files.FileHandle.write(FileHandle.java:289) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 7 more 10-10 13:57:45.320: E/AndroidRuntime(9421): Caused by: libcore.io.ErrnoException: open failed: EACCES (Permission denied) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.Posix.open(Native Method) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.BlockGuardOs.open(BlockGuardOs.java:110) 10-10 13:57:45.320: E/AndroidRuntime(9421): at libcore.io.IoBridge.open(IoBridge.java:400) 10-10 13:57:45.320: E/AndroidRuntime(9421): ... 9 more I'm not sure if I come this to the right place for help and suggestions.

  Read the article

• Hardware and Software Working Together - What Does LJE say?

  - by Stephen Slade

   IDG News Service - Oracle CEO Larry Ellison said Oracle will continue to bet on selling high-end custom hardware for its software products, even amidst a growing trend toward roomfuls of cheap, generic servers. "You have to be in the hardware business and the software business, to get the best possible system," he said during a keynote speech at Oracle's OpenWorld conference in Tokyo. "We believe it's the right idea, we believe it's the next generation of computing, we believe all the pieces have to fit together." Ellison, as he has often done in the past, repeatedly referred to Apple as his "favorite example" of such tight integration. He was a close friend of Apple's co-founder Steve Jobs and previously served on Apple's board of directors.He said sales of Oracle's advanced servers were booming and generating around a billion dollars a year in revenue for the company, which has until recent years focused almost exclusively on its software offerings. With the explosion of popular online services and the increasing number of mobile devices that access them, demand is high for databases that can quickly respond to high numbers of relatively simple queries. While Oracle is pitching its expensive, finely-tuned machines to meet this requirement, Internet behemoths like Google, Facebook and Microsoft increasingly rely on armies of low-cost, easily replaceable servers. Ellison emphasized the high specifications of Oracle's servers, which come packed with multiple terabytes of RAM and flash-based storage for speed. Such machines are superior to large server farms, he said, because they require far less electricity and floor space, and are also cost competitive. When asked about whether purchasing such products would lock customers in to expensive hardware from Oracle, he promised that the company's software would always run on "multiple hardware sources."  Ellison, who spoke from Kyoto, Japan's ancient capital, was shown live online via webcast. The Oracle founder has a fondness for Japanese architecture and is staying in his large garden residence in the city Source: Ellison: Hardware-software integration key, Apple is best example. Oracle's founder and CEO reaffirmed his commitment to custom hardware for its software products  LINK to Computerworld article Apr 5, 2012 http://www.computerworld.com/s/article/9225858/Ellison_Hardware_software_integration_key_Apple_is_best_example?source=CTWNLE_nlt_entsoft_2012-04-09&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+computerworld%2Fs%2Ffeed%2Ftopic%2F173+%28Computerworld+Databases+News%29#disqus_thread

  Read the article

• BizTalk 2009 - Custom Functoid Categories

  - by StuartBrierley

  I recently had cause to code a number of custom functoids to aid with some maps that I was writing. Once these were developed and deployed to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions a quick refresh allowed them to appear in toolbox.  After dropping these on a map and configuring the appropriate inputs I tested the map to check that they worked as expected.  All but one of the functoids worked as expecetd, but the final functoid appeared not to be firing at all. I had already tested the code used in a simple test harness application, so I was confident in the code used, but I still needed to figure out what the problem might be. Debugging the map helped me on the way; for some reason the functoid in question was not shown correctly - the functoid definition was wrong. After some investigations I found that the functoid type you assign when coding a custom functoid affects more than just the category it appears in; different functoid types have different capabilities, including what they can link too.  For example, a logical functoid can not provide content for an output element, it can only say whether the element exists.  Map this via a Value Mapping functoid and the value of true or false can be seen in the output element. The functoid I was having problems with was one whare I had used the XPath functoid type, this had seemed to be a good fit as I was looking up content in a config file using xpath and I wanted it to appear the advanced area.  From the table below you can see that this functoid type is marked as "Internal Only", preventing it from being used for custom functoids.  Changing my type to String allowed the functoid to function as expected. Category Description Toolbox Group Assert Internal Use Only Advanced Conversion Converts characters to and from numerics and converts numbers from one base to another. Conversion Count Internal Use Only Advanced Cumulative Performs accumulations of the value of a field that occurs multiple times in a source document and outputs a single output. Cumulative DatabaseExtract Internal Use Only Database DatabaseLookup Internal Use Only Database DateTime Adds date, time, date and time, or add days to a specified date, in output data. Date/Time ExistenceLooping Internal Use Only Advanced Index Internal Use Only Advanced Iteration Internal Use Only Advanced Keymatch Internal Use Only Advanced Logical Controls conditional behavior of other functoids to determine whether particular output data is created. Logical Looping Internal Use Only Advanced MassCopy Internal Use Only Advanced Math Performs specific numeric calculations such as addition, multiplication, and division. Mathematical NilValue Internal Use Only Advanced Scientific Performs specific scientific calculations such as logarithmic, exponential, and trigonometric functions. Scientific Scripter Internal Use Only Advanced String Manipulates data strings by using well-known string functions such as concatenation, length, find, and trim. String TableExtractor Internal Use Only Advanced TableLooping Internal Use Only Advanced Unknown Internal Use Only Advanced ValueMapping Internal Use Only Advanced XPath Internal Use Only Advanced Links http://msdn.microsoft.com/en-us/library/microsoft.biztalk.basefunctoids.functoidcategory(BTS.20).aspx http://blog.eliasen.dk/CommentView,guid,d33b686b-b059-4381-a0e7-1c56e808f7f0.aspx

  Read the article

• Brightness Crash and Fan issues in 12.04.1

  - by S.A. McIntosh

  I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

  Read the article

• Invitation til Oracle Open Experience DK11

  - by user13847369

  Kære Partnere, Vi afholder sammen med Arrow et større kundearrangement den 7. December ved navnet "Oracle Open Experience DK11". I kan se agendaen for dagen her: V. Torben Markussen, Sales director/Middleware director Nordics, Oracle Fornem stemningen fra årets OpenWorld og få præsenteret de største og mest relevante nyheder. Hør hvordan I drager konkret fordel af Oracle-nyheder som Oracle Cloud, storageløsningen Pillar Axiom og de unikke nye muligheder med Fusion Applications. V. Hans Bøge, IT-arkitekt, Oracle Hans Bøge fortæller om hvordan I optimerer jeres licensløsning, og letter administrationen af jeres database. En server fødes med adskillige cores - alle med licensomkostninger. Hvorfor ikke nøjes med at aktivere det antal der matcher jeres behov? Hør hvordan I får en løsning, der kan opgraderes hen ad vejen som behovene opstår. V. Kim Estrup, Produktchef 11G , Oracle Brugerdefinerede implementeringer gør jeres systemer unikke, hvilket kun øger komplek og administration. Kim Estrup vil fortælle alt om, hvordan I letter forvaltningen af jeres traditionelle data-centre, samt etablerer lynhurtig adgang til skyen. Få indføring i en omfattende løsning, der skærer gennem kompleksitet, øger service-kvalitet og minimerer administrations- omkostninger. V. Steen Schmidt, IT-arkitekt, Oracle Hør hvordan de nyeste teknologier indenfor virtualisering og server-management, kan forsimple jeres IT-processer og reducere omkostninger markant. Få demonstreret en løsn der er fire gange mere skalerbar end den seneste VWware, og som kan understøtte op  til 128 virtuelle CPUer per virtuel maskine - endda til en brøkdel af omkostningen. Steen Schmidt fortæller alt om mulighederne i jeres storagesystem V. Erik Lund, Storage Presales-arkitekt, Oracle Lyder det for godt til at være sandt? Det kan faktisk lade sig gøre. Erik Lund fortæller alt om de nyeste storage-teknologier, der åbner op for skalerbarhed på både disc- og controllerniveau, og for database-komprimering med op til faktor 50. Det reducerer behovet for discs og formindsker jeres backup-vindue markant. Kombineret med markedets højeste udnyttelsesgrad og omkostningsfri QoS, giver det helt nye muligheder. Dagen starter kl 8.30 med morgenmad og slutter kl 14.00 Jeg håber I har lyst til at deltage samt at invitere jeres kunder.I skulle gerne have modtaget en invitation som I også kan bruge til at sende ud til jeres kunder.Er det ikke tilfældet så send mig endeligt en mail. Du kan også tilmelde dig via dette link: http://www.woho.dk/oracle og indtaste billetnummer: 1500Mvh Thomas Stenvald

  Read the article

• Wireless acting weird ubuntu 12.04 LTS

  - by Philip Yeldhos

  I'm kinda new here, so please bear with me. My wireless driver is acting very weird. It shows my router's name, but when it is connecting (after entering the correct password), the icon on the tray is like, refreshing every once in a second, while showing the animation that it is connecting. And after a few seconds, error message come up saying that wireless network is disconnected. I installed the drive through "additional drivers". What info do you need? Somebody please help. philip@philip-HP-Mini-110-3100:~$ sudo iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.472 GHz Access Point: Not-Associated Bit Rate:72 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:11 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. here's what lspci -v gave me: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1483 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at 52000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-82-ff-ff-3f-e0-2a Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac okay, i removed the driver additional drivers gave me. now, this is what has happened: lsmod gave me: philip@philip-HP-Mini-110-3100:~$ lsmod | grep brc brcmsmac 540875 0 mac80211 436455 1 brcmsmac brcmutil 14675 1 brcmsmac cfg80211 178679 2 brcmsmac,mac80211 crc8 12781 1 brcmsmac cordic 12487 1 brcmsmac and iwconfig gave me: philip@philip-HP-Mini-110-3100:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. and lspci -v gave me: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1483 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at 52000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

  Read the article

• BPM ADF Task forms. Checking whether the current user is in a BPM Swimlane

  - by Christopher Karl Chan

  @page { margin: 0.79in } P { margin-bottom: 0.08in } --Focus So this blog entry will focus on BPM Swimlane roles and users from a ADF context. So we have an ADF Task Details Form and we are in the process of making it richer and dynamic in functionality. A common requirement could be to dynamically show different areas based on the user logged into the workspace. Perhaps even we want to know even what swim-lane role the user belongs to. It is is a little bit harder to achieve then one thinks unless you know the trick. The Challenge The tricky part here is that the ADF Task Details Form is in fact part of a separate J2EE application to the main workspace. So if you try to use Java or Expression Language to get the logged in user you will only find anonymous and none of the BPM Roles you will be expecting. So what to do? The Magic First add the BC4J Security library to your view project. Then Restart JDeveloper. Now find the web.xml file in the view project of your ADF Task Details Application and look for the JpsFilter section. Then add in the following section. <init-param> <param-name>application.name</param-name> <param-value>OracleBPMProcessRolesApp</param-value></init-param> This will link your application to that of the BPM workspace. Then in your dynamic part of your ADF form you can now check whether the user logged into the BPM Workspace belongs in a BPM swim-lane in any BPM process. The best way to do this is by using expression language in the JSF page itself. Here I am simply changing the rendered flag to either true or false and thereby hiding or showing a section. Perhaps you are re-using the same form for a task in an approver swim-lane and ordinary user swimlane. So we only want the approver to see this field. So call the built in function to check if the user is a member of the BPM swim-lane role. The name of the role must be of the syntax BPMProject.RoleName <af:outputText value="This will only be rendered when the user is part of the BPM Swimlane Role rendered="#{securityContext.userInRole['BPMProjectName.Rolename']}"/> Now you must redeploy your ADF Task Form project Now (in the image above) the text will ONLY get rendered in the Task Details Form only if the user logged into the workspace is a member of the swimlane Unsecure of the BPM project SimpleTask

  Read the article

• Good Scoop: The PeopleSoft/IBM Backstory

  - by [email protected]

  Sometimes you're searching for something online and you find an unrelated, bonus nugget. Last week I stumbled across an interesting blog post from Chris Heller of a PeopleSoft consulting shop in San Ramon, CA called Grey Sparling. I don't know these guys. But Chris, who apparently used to work on the PeopleTools team, wrote a great article on a pre-acquisition, would-be deal between IBM and PeopleSoft that would have standardized PeopleSoft on IBM technology. The behind-the-scenes perspective is interesting. His commentary on the challenges that the company and PeopleSoft customers would have encountered if the deal had gone through was also interesting: ·         "No common ownership. It's hard enough to get large groups of people to work together when they work for the same company, but with two separate companies it is much, much harder. Even within Oracle, progress on Fusion applications was slow until Thomas Kurian took over Fusion applications in addition to Fusion middleware." ·         "No customer buy-in. PeopleSoft customers weren't asking for a conversion to WebSphere, so the fact that doing that could have helped PeopleSoft stay independent wouldn't have meant much to them, especially since the cost of moving to whatever a "PeopleSoft built on WebSphere" would have been significant." ·         "No executive buy-in. This is related to the previous point, but it's worth calling out separately. If Oracle had walked away and the deal with IBM had gone through, and PeopleSoft customers got put through the wringer as part of WebSphere move, all of the PeopleSoft project teams would be put in the awkward position of explaining to their management why these additional costs and headaches were happening. Essentially they would need to "sell" the partnership internally to their own management team. That's not a fun conversation to have." I'm not surprised that something like this was in the works. But I did find the inside scoop and Heller's perspective on the challenges particularly interesting. Especially the advantages of aligning development of applications and infrastructure development under one roof. Here's a link to the whole blog entry.  

  Read the article

• ASP.NET vNext Blog Post Series

  - by Soe Tun

  Originally posted on: http://geekswithblogs.net/stun/archive/2014/06/04/asp.net-vnext-blog-post-series.aspxASP.NET vNext Blog Post Series ASP.NET vNext was announced at TechEd 2014, and I have been playing around with it a bit. ASP.NET vNext is an exciting and revolutionary change for the Microsoft .NET development platform. ASP.NET vNext is now open-source, and available on Github at this location: https://github.com/aspnet/Home. I want to start a blog post series on the ASP.NET vNext, and share my experience as I learn more about it. Keeping it simple Each blog post in the series will be short and simple so I can write them in a short amount of time, and keep it focused on one (at most two) topic(s) per post. My goal is to make it easy to absorb the information as there are a ton of great new stuff to cover. Many other people in the community have blogged about the key new features of the ASP.NET vNext. I will link to those blog posts in my next blog post. MVC 6 POCO Controller Today, I want to start this blog post series with a teaser code snippet for those developers familiar with the ASP.NET MVC. Getting Started with ASP.NET MVC 6 article from ASP.NET website shows how to write a lightweight POCO (plain-old CLR object) MVC Controller class in the upcoming ASP.NET MVC 6. However, it doesn't show us how to use the IActionResultHelper interface to render a View. This is how I wrote my POCO MVC Controller based on the https://github.com/aspnet/Home/blob/master/samples/HelloMvc/Controllers/HomeController.cs sample from Github.   Note that this may not be the best way to write it, but this is good enough for now. using Microsoft.AspNet.Mvc; using Microsoft.AspNet.Mvc.ModelBinding; using MvcSample.Web.Models; namespace MvcSample.Web { public class HomeController { IActionResultHelper html; IModelMetadataProvider mmp; public HomeController(IActionResultHelper h, IModelMetadataProvider mmp) { this.html = h; this.mmp = mmp; } public IActionResult Index() { var viewData = new ViewDataDictionary<User>(mmp) { Model = User() }; return html.View("Index", viewData); } public User User() { return new User { Name = "My name", Address = "My address" }; } } } Please feel free to give me feedback as this will greatly help me organize the blog posts in this series, and plan head. Thanks for reading!

  Read the article

• Certification Notes: 70-583 Designing and Developing Windows Azure Applications

  - by BuckWoody

  It’s time for another certification, and we’ve just release the 70-583 exam on Windows Azure. I’ve blogged my “study plans” here before on other certifications, so I thought I would do the same for this one. I’ll also need to take exam 70-513 and 70-516; but I’ll post my notes on those separately. None of these are “brain dumps” or any questions from the actual tests - just the books, links and notes I have from my studies. I’ll update these references as I’m studying, so bookmark this site and watch my Twitter and Facebook posts for when I’ll update them, or just subscribe to the RSS feed. A “Green” color on the check-block means I’ve done that part so far, red means I haven’t. First, I need to refresh my memory on some basic coding, so along with the Azure-specific information I’m reading the following general programming books: Introducing Microsoft .NET (Pro-Developer): http://www.amazon.com/Introducing-Microsoft-Pro-Developer-David-Platt/dp/0735619182/ref=sr_1_1?s=books&ie=UTF8&qid=1296339237&sr=1-1 Head First C#, 2E: A Learner's Guide to Real-World Programming with Visual C# and .NET: http://www.amazon.com/Head-First-2E-Real-World-Programming/dp/1449380344/ref=sr_1_1?ie=UTF8&qid=1296339176&sr=8-1 Microsoft Visual C# 2008 Step by Step : http://www.amazon.com/Microsoft-Visual-2008-Step/dp/0735624305/ref=sr_1_1?s=books&ie=UTF8&qid=1296339208&sr=1-1 c The first place to start is at the official site for the certification. That’s here: http://www.microsoft.com/learning/en/us/Exam.aspx?ID=70-583&Locale=en-us c On that page you’ll find several resources, and the first you should follow is the “Save to my learning” so you have a place to track everything. Then click the “Related Learning Plans” link and follow the videos and read the documentation in each of those bullets. There are six areas on the learning plan that you should focus on - make sure you open the learning plan to drill into the specifics. c Designing Data Storage Architecture (18%) Books I’m Reading: Links: My Notes: c Optimizing Data Access and Messaging (17%) Books I’m Reading: Links: My Notes: c Designing the Application Architecture (19%) Books I’m Reading: Links: My Notes: c Preparing for Application and Service Deployment (15%) Books I’m Reading: Links: My Notes: c Investigating and Analyzing Applications (16%) Books I’m Reading: Links: My Notes: c Designing Integrated Solutions (15%) Books I’m Reading: Links: My Notes:

  Read the article

• Database Mirroring – deprecated

  - by fatherjack

  Do you use mirroring on any of your databases? Do you use mirroring on SQL Server Standard Edition? I do, as a way of having a stand-by server ready to take over if there is a problem with the live server so that business can continue despite whatever disaster may strike at our primary server location. In my experience it has been a great solution for us as it is simple to implement, reliable and predictable. Mirroring has been around since SQL Server 2005 sp1 but with the release of SQL Server 2012 mirroring has now been placed on the deprecation list. That’s right, Microsoft are removing this feature from SQL Server. SQL Server 2012 had lots of improvements and new features around this sort of technology – the High Availability, Disaster recovery and Always On features described in detail here by Brent Ozar and  Microsoft’s own Customer Service and Support SQL Server Engineers . Now the bad news, the HADRON features are pretty much all wrapped up in the Enterprise Edition of SQL Server 2012. This is going to be a big issue for people, like me, who are only on Standard Edition of earlier versions mostly due to our requirements and the budget (or lack thereof) required for Enterprise Edition licenses. No mirroring in Standard Edition means no upgrade. Don’t Panic. There are two stages of deprecation and they dont happen fast. The first stage – Deprecation Announcement- means that Microsoft have decided that there is a limited future for a particular feature and this is your cue that new projects and developments should not be implemented on this technology as it will cease to exist in the future. This is where mirroring currently stands. You have time to consider your options and start work on planning how you will move away from using this feature. This can be 2 or 3 versions of SQL Server, possibly more. The next stage is Deprecation Final Support - this is where you are on your last chance, When you see this then the next version of SQL Server will not have this feature in it so you need to implement your plans to move to an alternative solution. While these two phases are taking place Microsoft are open to feedback on how people use their products and if enough people make the case for mirroring (or an equivalent technology) to be in the Standard Edition then they may make changes rather than lose customers or have customers cease upgrading in order to keep the functionality they need. Denny Cherry (@MrDenny) has published an article on this same topic here with more detail than me so I wont go over old ground. All I will say is that you should read his article now and then follow the link to his own site where he is collecting peoples information on how they use mirroring in Standard Edition so that our voice can be put to Microsoft.  

  Read the article

• Announcing Oracle Mobile Timecards for Oracle E-Business Suite, Release 12.1 and Release 12.2

  - by CaroleB

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Oracle E-Business Suite Development is pleased to announce the availability of Oracle Mobile Timecards for Oracle E-Business Suite iPhone application.  With this new mobile app, users can record time on the go, and quickly submit timecards to ensure that downstream processes like Payroll, Projects Costing and Vendor Settlements are executed on time. Key features include: Enter time day-wise for easy time booking Enter time in Quick Time or Regular Time modes Support Payroll and Projects based time entry Aggregate day-wise entries into timecard periods Submit and view timecards while on the go Oracle Mobile Timecards for Oracle E-Business Suite is currently available on OS, and Android availability is planned. It is available to Oracle E-Business Suite customers as part of an existing Oracle Time and Labor product license; no new "mobile" license is required. Download Availability You can download Oracle E-Business Suite Smartphone Applications directly from the Apple Store and run them on Oracle Business Suite 12.1.3 or 12.2.3 – the same client-side code runs with either release: iTunes link: https://itunes.apple.com/us/app/oracle-timecards-for-oracle/id883064245?mt=8  For each app, an administrator performs a simple, one-time ennoblement using server-side patches. For deployment instructions, see Oracle E-Business Suite Mobile Apps, Release 12.1 and 12.2 Documentation (Note 1641772.1). Demo Availability   Support for demo-ING in GS environments will be available shortly. A demo preview of Oracle Mobile Timecards for Oracle E-Business Suite is available here. Configured Layouts on Mobile Timecards Note.1671889.1 Mobile Timecard Layout Configuration Whitepaper for OTL Mobile Time Entry /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Times New Roman","serif";}

  Read the article

• How to install Network Adapter Drivers for Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Ubuntu 12.04

  - by Jessica Burnett

  How can I install drivers for 64-bit Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller (NDIS 6.20) for Ubuntu 12.04. I dual boot Windows7/Ubuntu 12.04 drivers work for 64-bit Windows 7. lspic -nn: 00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Ivy Bridge PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0de9] (rev a1) 02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 08) 03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4) 04:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 30) 04:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 30) 04:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 30) 04:00.4 System peripheral [0880]: JMicron Technology Corp. xD Host Controller [197b:2394] (rev 30) sudo lshw -c network *-network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 version: 08 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list configuration: latency=0 resources: memory:d3a00000-d3a3ffff ioport:2000(size=128) *-network description: Wireless interface product: Centrino Wireless-N 2200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: c4 serial: 9c:4e:36:14:d4:7c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:45 memory:d3900000-d3901fff I also tried Manually configuring wired connection. Nether wired or wireless connects

  Read the article

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• Producing a smooth mesh from density cloud and marching cubes

  - by Wardy

  Based on my results from this question I decided to build myself a 3D noise map containing float values in place of my existing boolean point values. The effect I'm trying to produce is something like this, rather than typical rolling hills; which should explain the "missing cubes" in the image below. If I render my density map in normal "minecraft mode" (1 block per point in the density map) varying the size of the cube based on the value in my density map (floats in the range 0 to 1) I get something like this: I'm now happy that I can produce a density map for the marching cubes algorithm (which will need a little tweaking) but for some reason when I run it through my implementation it's not producing what I expect. My problem is that I'm getting something like the first image in this answer to my previous question, when I want to achieve the effect in the second image. Upon further investigation I can't see how marching cubes does the "move vertex along the edge" type logic (i.e. the difference between the two images on my previous link). I see that it does do some interpolation, but I'm not convinced I have the correct understanding of what I think it should do, because the code in question appears to give the same result regardless of whether I use boolean or float values. I took the code from here which is a C# implementation of marching cubes, but instead of using the MarchingCubesPrimitive I modified it to accept an object of type IDrawable, containing lists for the various collections (vertices, normals, UVs, indices), the logic was otherwise untouched. My understanding is that given a very low isovalue the accuracy level of the surface being rendered should increase, so in short "less 45 degree slows more rolling hills" type mesh output. However this isn't what I'm seeing. Have I missed something or is the implementation flawed and need to be fixed? EDIT: A little more detail on what I am seeing when I "marching cube" the data. Ok so firstly, ignore the fact that the meshes created by the chunks don't "connect" (i'll probably raise another question about this later). Then look at the shaping of the island, it's too ... square, from the voxels rendered as boxes you get the impression there's a clean soft gradual hill and yet from the image there are sharp falling edges even in the most central areas where the gradient in the first image looks the most smooth. The data is "regenerated" each time I run this so no 2 islands come out the same, and it's purely random so not based on noise, but still, how can it look so smooth in 1 image and so not smooth in the other?

  Read the article

• What are the tradeoffs for using 'partial view models'?

  - by Kenny Evitt

  I've become aware of an itch due to some non-DRY code pertaining to view model classes in an (ASP.NET) MVC web application and I'm thinking of scratching my itch by organizing code in various 'partial view model' classes. By partial-view-model, I'm referring to a class like a view model class in an analogous way to how partial views are like views, i.e. a way to encapsulate common info and behavior. To strengthen the 'analogy', and to aid in visually organizing the code in my IDE, I was thinking of naming the partial-view-model classes with a _ prefix, e.g. _ParentItemViewModel. As a slightly more concrete example of why I'm thinking along these lines, imagine that I have a domain-model-entity class ParentItem and the user-friendly descriptive text that identifies these items to users is complex enough that I'd like to encapsulate that code in a method in a _ParentItemViewModel class, for which I can then include an object or a collection of objects of that class in all the view model classes for all the views that need to include a reference to a parent item, e.g. ChildItemViewModel can have a ParentItem property of the _ParentItemViewModel class type, so that in my ChildItemView view, I can use @Model.ParentItem.UserFriendlyDescription as desired, like breadcrumbs, links, etc. Edited 2014-02-06 09:56 -05 As a second example, imagine that I have entity classes SomeKindOfBatch, SomeKindOfBatchDetail, and SomeKindOfBatchDetailEvent, and a view model class and at least one view for each of those entities. Also, the example application covers a lot more than just some-kind-of-batches, so that it wouldn't really be useful or sensible to include info about a specific some-kind-of-batch in all of the project view model classes. But, like the above example, I have some code, say for generating a string for identifying a some-kind-of-batch in a user-friendly way, and I'd like to be able to use that in several views, say as breadcrumb text or text for a link. As a third example, I'll describe another pattern I'm currently using. I have a Contact entity class, but it's a fat class, with dozens of properties, and at least a dozen references to other fat classes. However, a lot of view model classes need properties for referencing a specific contact and most of those need other properties for collections of contacts, e.g. possible contacts to be referenced for some kind of relationship. Most of these view model classes only need a small fraction of all of the available contact info, basically just an ID and some kind of user-friendly description (i.e. a friendly name). It seems to be pretty useful to have a 'partial view model' class for contacts that all of these other view model classes can use. Maybe I'm just misunderstanding 'view model class' – I understand a view model class as always corresponding to a view. But maybe I'm assuming too much.

  Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >