Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 580/837 | < Previous Page | 576 577 578 579 580 581 582 583 584 585 586 587  | Next Page >

• Using a CF card as an IDE HDD

  - by dartacus

  I have an old Sony laptop (Vaio TR1-MP) that I like. The HDD has died and since it's a hard-to-find 1.8" IDE hard drive I'm considering buying one of those little CF card adaptors and a 16gb CF card. The total cost of that is about £30 and replacement HDDs for this model are far pricier. Has anyone replaced their HDD with a CF card in this way, and, crucially, is the performance utterly horrible afterwards? ;-) I've seen a couple of threads which hint it's possible but the advice eventually given was just to buy a SSD, but I'm not even sure if its possible to get a 1.8" SSD with an IDE connector that'll fit my laptop. (I freely admit that the most sensible thing to do would be to bin it and just buy a cheap netbook which would be smaller, faster and lighter than the sony, but it does have a very nice widescreen display and dammit I just like it !) Thanks, G

  Read the article

• Truecrypt system partion partially encryted but then drive corrupted and won't boot - decrypting so I can access files to backup?

  - by Dr.Seuss

  So I was attempting to encrypt my (Windows 7) system drive with Truecrypt and it stopped at around 15% and said that there was a segment error and that it could not proceed until it was fixed. So, I restarted the computer and ran HDD Regenerator which subsequently fixed the bad sectors on the drive, but now my system cannot boot. So, I run a number of recovery disks to no avail (Windows repair is unable to fix) and the drive won't mount on a linux version run from a CD because the drive is encrypted. So I tried mounting the drive using Truecrypt under the Linux distribution on the disk and selected "Mount partition using system encryption without pre-boot authentication" so I can decrypt, but I get an error message about it only being possible once the entire system is encrypted. How do I get out of this mess? I need to be able to back up the data that's on that partially encrypted drive so I can reinstall my operating system.

  Read the article

• How do I get rid of "Trusted Drive Manager"?

  - by Earlz

  I have a Dell laptop that's been experiencing some weirdness lately. Apparently Dell puts "Trusted Drive Manager" on their hardware.. Well, now I keep getting these errors: I tried uninstalling Dell Data Protection, but it says some other package is required for the installation, which I can't install because I'll get another generic error (Dell Data Protection Access Drivers). This error pops up when I first boot, when I open a save file dialog, when I try to do a disk cleanup. How the hell do I get rid of this!?

  Read the article

• Missing 16:10 resolutions with Nvidia drivers (Can't add resolutions)

  - by Wuinny

  Hello, I have a laptop with a Nvidia 9650M GT and used the drivers that Seven brought me. It works fine but Metro 2033 tells me that i have to upgrade my drivers to play the game. So i did it. But since i did a clean install of the new Nvidia drivers, i just have 1440*900 or 4:3 resolutions. I usually played with 1280*800 or 1184*740 (for performance issue) With the "old" drivers i was able to create custom resolution (1184*740) in Nvidia control panel but now when i try it tells me that "my monitor cannot support this resolution". When i insist, it works but soon as i shut down my computer i have to recreate it.. Do anyone have a fix ? Thank you

  Read the article

• Evaluate a vendor laptop before deployment to user?

  - by NetWarrior

  I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

  Read the article

• Why do I get a GRUB error after deleting the Linux partition?

  - by nateify

  I had a dual-boot setup with Windows 7 and Windows Vista. I used Easus Partition Manager and shrank my Windows 7 partition. In the empty space, I installed Linux Mint. I decided I didn't want it anymore, I simply deleted the Linux Mint partition. Now when I boot, all I get is this: GRUB loading. error: no such partition grub rescue> I don't have my Windows 7 install disk because it was pre-installed.

  Read the article

• Cached css/javascript files on Sun Java System Web Server

  - by Derp

  I'm doing front-end web development in a Solaris 10 / Sun Java System Web Server 7.0U2 environment. I have noticed that changes to static css or javascript files often do not take effect immediately, whereas changes to static html files always do. My best guess is that a default setting in the web server causes it to cache certain file types in order to provide reasonable performance out of the box. I don't have the admin server running--I'll need to edit the config files by hand. What change(s) can I make so that all of my css and javascript edits take effect immediately? Thanks!

  Read the article

• Upload large database SQL file

  - by Devy

  I've a database of more than 20Gb of size on my hard disk. What is the best way to upload it with the least (money) load possible on the server? - I'm on Windows 7. - I have FTP and SSH access on the server. I avoid using FTP because my connection cuts off a lot, I can't imagine I re-upload again the file after failing on 99%. I found some tools that split the large .sql file to small .sql files, but they didn't mention how to gather these files again into one file. Another way is to archive the big .sql file to .rar with -v option, upload them through FTP then unpack them. But unpacking will also cost, right? I know it will cost in any cases, but any best practice will be strongly appreciated.

  Read the article

• File Transfer Protocol (FTP) Service won't install

  - by user64204

  Hi all, Problem description: -I'm running Windows Server 2003 and I'm trying to install the FTP service following this procedure: http://support.microsoft.com/kb/323384 -At step 7 of the above procedure I provide Windows Small Business Server 2003 disc1 and the installation completes successfully (note: the installer looks for 'ftpctrs2.dll' but the disk contains 'FTPCTRS2.DL_' and seems happy with it as per allowed file types). -However the installation silently fails because if I go back to the list of windows components, FTP is still unchecked, and if I open IIS, the FTP sites section is missing. Question: -How can I force the installation of FTP? Additional info: I don't think this is related but will mention it in case I'm wrong and it is: before I could attempt to install FTP I ran into, and fixed, the issue described in this solution: http://support.microsoft.com/kb/838860 Thanks.

  Read the article

• WD Passport Won't Mount

  - by Scott7278

  My WD Passport won't mount. However, it turns on when plugged into my macbook and doesn't make any strange noises. It took a small fall (just a few inches and it was on my couch) and I'm very concerned about physical damage. When I open up disk utility it shows the root 500 GB WD My Passport drive which seems to be OK when I verify it and repair it. However, the "External Hard Drive", the directory underneath the "500 GB WD My Passport drive" is grayed out. When I verify the External Hard Drive it says it needs to be rapaired. When I try and repair it it gives me the following message and does not seem to progress: "Updating boot support partitions for the volume as required." Is there hope for me recovering my data? I stupidly have important data on it that I don't have anywhere else.

  Read the article

• Deleting a partition on dual boot

  - by blade4

  I have split my C:\ physical disk into 3 seperate partitions: C, H, and K. C has my original OS and is the active partition, H has another OS (dual boot), and K has song files. I want to keep the other OS (Windows Server) and when I am in this OS, I can't delete C ("Windows cannot format this partition"). What is the best way for me to get rid of C, keep all the songs intact, and the Server OS partition, so I replace C with another OS, and then get rid of the original Windows Server OS (So revert the dual boot to a single boot).

  Read the article

• VirtualBox cloned Ubuntu Server network error

  - by Luke

  I run a number of virtual servers on my network and I want to be able to easily clone base installations of Ubuntu Server. I use the VBoxManage command to clone the actual hard disk and I then create a new profile for my VM and copy over the settings of the original VM. However, when I boot into the cloned VM, there seems to be a network problem. When I issue a PING I get the message "Network unreachable". I traced it down to the fact that the virtual network card of the cloned VM has a different MAC address then the original VM. When I copy the MAC address the clone seems to work fine. How can I have the cloned VM have it's own MAC address?

  Read the article

• if a usb pen drive has 64349 cylinders, is it damaged?

  - by Andrew S

  I have a 4Gb USB pen drive that I'm trying to format with FAT32. When I run fdisk, it gives me this message: The number of cylinders for this disk is set to 64349. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) I've tried deleting the partition table, creating new partitions, etc, but they never work. Sometimes I can write to the drive the first time I use it after formatting it, but then it becomes read-only in both Windows and Linux. I've tried this on multiple computers. Am I doing something wrong, or is the drive reporting an incorrect number of cylinders? Is the drive itself likely to be corrupted, and is there anyway to fix this under Windows Vista or Linux? Thanks

  Read the article

• CMD file time not always matching windows explorer file time

  - by skyrail

  I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

  Read the article

• Linux IO scheduler on databases with RAID

  - by Raghu

  Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Recommendations for a cloud/hosted server environment that can run different Windows VMs?

  - by Rory

  I currently have a colocated Win 2008 server that I use for hosting different windows VMs for testing: Win 2008, Win XP, Vista, Win7, Win 2000. I'd like to ditch the server and use something like Amazone AWS but the key thing is I need to be able to launch VMs for these different windows versions. AWS doesn't allow this currently. Can anyone recommend somewhere that I could use? The main reasons I want to get away from my own server are: administration: backup, windows updates, etc space: disk limitations mean I can't have all the VMs I want. I'd like to be able to pay for space incrementally. I'll typically only run 1-3 at a time but want lots of snapshots of different machines.

  Read the article

• Web & SQL Hosting 32 vs. 16 GB of ram

  - by TravisK

  I'm in the market for a new dedicated host for my website. My question is I can pay more to upgrade to 32GB of RAM, but it seems overkill for my website right now, in fact, 16GB seems a little overkill. However, I run a lot of pretty intense full text searches for my site. I'm wondering if SQL Server would benefit, or could it be configured to use the 32 GB of RAM if I purchase the additional to help speed things up? I am assuming that most of my latency is caused by disk I/O and that for the extra money spent on RAM, I might not see any improvement in overall speed?

  Read the article

• 2 "P4" power connectors *AND* an 8 pin EPS connector -- all necessary?

  - by chris

  I recently bought an Arima SW350 motherboard. It supports 16 ddr simms as well as 2 opteron 2xx CPUs, so I imagine it may have pretty heavy power requirements... It has a 24 pin ATX power connector, 2 4 pin "P4" power connectors, and an 8 pin EPS power connector. My supermicro power supply has a 24 pin ATX connector and the EPS connector, and one P4 connector. Can I safely run this thing with only one P4 connector plugged in? Can I safely get a "hard disk to P4" adapter and use that to power the other P4 connector on the motherboard? Do I just need a new power supply? The board's documentation is pretty thin on the topic.

  Read the article

• Why does my USB stick not show up in Windows Vista?

  - by Kjensen

  Just reinstalled a Lenovo laptop with Vista. Two separate USB sticks, that work fine on another computer, will not show up on this Vista computer. USB ports work fine for other stuff. USB sticks worked before I reinstalled the computer. After looking around, I tried going into Disk management, to see if they appear there - they don't. Is there some sort of service, that might be disabled, not allowing removable drives to mount? Or what else can be wrong?

  Read the article

• How to setup VM in KVM? Qcow or LVM etc.

  - by JohnAdams

  Finally, after quite a bit of this vs that, I have chosen to virtualize a couple of my servers with KVM. I did do a test setup as well, but I have a few questions about setting VM's in KVM. Would appreciate pointers. What is the best storage to use - Qcow2 or LVM? I like the fact that I can copy the VM file easily with a Qcow2 but what about LVM, how do I take a backup or make copy on a development server to play with? I know I can clone a LVM, but how do I bring to my development server? How do I setup the guest partitioning? For example, when setting up Ubuntu inside Ubuntu, do I choose LVM for that VM or regular fdisk partitioning? Can I increase the partition size then later, if I need a bigger disk?

  Read the article

• Openvz: What exactly does it mean when tcpsndbuf failcnt increases? Why must there be a minimum difference between limit and barrier?

  - by Antonis Christofides

  When the failcnt of tcpsndbuf increases, what does this mean? Does it mean the system had to go past the barrier, or past the limit? Or, maybe, that the system failed to provide enough buffers, either because it needed to go past the limit, or because it needed to go past the barrier but couldn't because other VMs were using too many resources? I understand the difference between barrier and limit only for disk space, where you can specify a grace period for which the system can exceed the barrier but not the limit. But in resources like tcpsndbuf, which have no such thing as a grace period, what is the meaning of barrier vs. limit? Why does the difference between barrier and limit in tcpsndbuf be at least 2.5KB times tcpnumsock? I could understand it if, e.g., tcpsndbuf should be at least 2.5KB times tcpnumsock (either the barrier or the limit), but why should I care about the difference between the barrier and the limit?

  Read the article

• Macrium Reflect Server v5 for Server Cloning?

  - by Stephane

  I'm starting to have clients with basic windows server setups. They have data backups, but no real strategy for system backups. I've been looking at cloning software which with linux or images seems easy enough (aside from DC complications, and other things I'm going to ignore until I learn more). What do people do when you have a non-disk hardware failure? I"ve been looking at server migration backup solutions and this one seems to be the cheapest. Anyone tried this? What more do I need to do to safeguard server setups? The hardware on these systems is a little out of date with Server 2003 setup at both businesses. Thanks!

  Read the article

• Snow Leopard Hangs at Login Window

  - by jessecurry

  I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

  Read the article

< Previous Page | 576 577 578 579 580 581 582 583 584 585 586 587  | Next Page >