Search Results

Search found 17546 results on 702 pages for 'event notification'.

Page 581/702 | < Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >

• Is there a realiable way to troubleshoot wake up from sleep in Windows?

  - by Borek

  Is there a reliable way to troubleshoot laptop wakes? I've seen "heuristics" posted here and there but isn't there really a simple and deterministic way to tell what's causing a problem? Specifically, my laptop wakes up about every hour for about 2 minutes. Exported event log entries are here: http://www.mediafire.com/?abcqb00v5wyo6pj. I've tried: powercfg -devicequery wake_armed Empty result set. Scheduled tasks - the main ones are not scheduled to run every hour. When go through a long list of all possible tasks, there are some that are set to be triggered every hour (e.g., MS "RacTask" whatever it is). But when I go to power options, Advanced settings, Sleep, Allow wake timers it is set to "Disable". Also, the specific task is not set to wake the computer if necessary. Power options for my Ethernet card don't enable it to wake the computer - the cable is disconnected anyway. There are no other HW devices attached - no USB disks, no keyboards / mice etc. I am really clueless and quite unhappy that it's so hard to troubleshoot this situation.

  Read the article

• How to move your Windows User Profile to another drive in Windows 8

  - by Mark

  I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

  Read the article

• BizTalk/MQ - DCOM was unable to communicate with the computer xxx using any of the configured protocols

  - by NealWalters

  I've read the other questions on this same error, but don't see a close match to this scenario. We got 18 of these last night between 12:17:13 and 12:39:37 on Win 2008/R2. It caused us to lose connectivity between BizTalk 2010 and WebSphere MQ machine. All our BizTalk machines (Prod, QA, Train, etc...) got the messages at the roughly same time and in the same quantity (about 18 of them). Computer xxx is the WebSphere MQ machine. What could cause this in the middle of the night? The servers are configured and running in Prod for a couple of years. There is no Win Firewall running, and servers are practically on the same rack. Could a run-away or 100% utilized CPU on the WebSphere MQ cause this issue? What else could cause it? BizTalk did NOT auto-recover from this situation. The above was followed by thousands of this message in the BizTalk event logs: The adapter "MQSeries" raised an error message. Details "Error encountered on Queue.Get Queue name = MyQManager/MyQueueName Reason code = 2354.". We restated BizTalk host instances, and it did not come back right away. It seemed we had to stop host instances for about two minutes, then start them.

  Read the article

• HD video editing system with Truecrypt

  - by Rob

  I'm looking to do hi-def video editing and transcoding on an unencrypted standard partition, with Truecrypt on the system partition for sensitive data. I'm aiming to keep certain data private but still have performance where needed. Goals: Maximum, unimpacted, performance possible for hi-def video editing, encryption of video not required Encrypt system partition, using Truecrypt, for web/email privacy, etc. in the event of loss In other words I want to selectively encrypt the hard drive - i.e. make the system partition encrypted but not impact the original maximum performance that would be available to me for hi-def/HD video editing. The thinking is to use an unencrypted partition for the video and set up video applications to point at that. Assuming that they would use that partition only for their workspace and not the encrypted system partition, then I should expect to not get any performance hit. Would I be correct? I guess it might depend on the application, if that app is hard-wired to use the system partition always for temporary storage during editing and transcoding, or if it has to be installed on the C: system partition always. So some real data on how various apps behave in the respect would be useful, e.g. Adobe, Cyberlink, Nero etc. etc. I have a Intel i7 Quad-core (8 threads) 1.6Ghz (up to 2.8Ghz turbo-boost) 4Gb, 7200rpm SATA, nvidia HP laptop. I've read the excellent posting about the general performance impact of truecrypt but the benchmarks weren't specific enough for my needs where I'm dealing with HD-video and using a non-encrypted partition to maintain max performance.

  Read the article

• Arch Linux: How to handle patches which only you will use?

  - by user12932

  I'm using freerdp together with xmonad and it has been giving me a lot of trouble. The super key (or "windows key") is my mod key in xmonad and it has been interfering with my freerdp usage rather annoyingly. Whenever I switched workspaces (or did anything else in xmonad involving the super key), windows (controlled by the freerdp instance in focus) registered a keypress as well. This event combined with the loss of focus got the super key stuck in windows indefinitely: the press of the keys d and r would first show my desktop, then open the run dialog (as if I was pressing the windows key constantly). I've tried several versions of freerdp, but all exhibited this annoying behavior. So I resorted to patching freerdp myself to just ignore the left super key on my keyboard. I love free software for a lot of reasons (especially the ability to alter things like this myself), however I still find it annoying to patch and rebuild freerdp on all version (and dependency) changes. How do you deal with situations like this? Is there even a "right way" to resolve this issue?

  Read the article

• .NET 2.0 Application now running slow on IIS 7.5

  - by Valien

  I recently moved (and still in testing) an application from a Windows 2003 Server (Physical box) running IIS 6.x to a Windows 2008 R2 Standard (VM) IIS 7.5 server. The application is a .NET framework 2.0 application and is running under a 2.0 App Pool. This site works great except for one thing: Takes forever to get a request back. I've been tracking it with Chrome Inspect Element and it queries the site and can take up to 45 seconds to answer. Now when it does the page(s) render instantly but it's that initial request that's killing it. I see no error logs or issues with the application or Windows Event Viewer or even IIS logs so not sure where to start looking next. Some new changes was that previously the app resided behind a Pix firewall and now is behind a larger network environment in a DMZ zone (and I believe NetScaler is also being used to manage the network). I do not have rights/abilities to look at the network itself but can contact the Data center folks to look deeper into this but I wanted to make sure it's not my application that might be causing the slowdown or IIS. In summary: .NET 2.0 application works great in IIS 6.x Application moved to an IIS 7.5 server and now slow on rendering but when it does render responds back with pages instantly. Edit for solution Found out that it was the SOAP calls that were slowing the site down. In the new datacenter my application cannot request SOAP calls and so they time out after 40-45 seconds or so. Now trying to find out if I can install a proxy server to redirect this...

  Read the article

• How to set up RAID-0 first time on new PC?

  - by jasondavis

  I have built basic PC's in the past but have never used a RAID array at all. SO now I am buying parts to build my new PC, it will be an intel i7 processor. My motherboard will have RAID support which I will use instead of an aftermarket raid controller for now. Also I plan to use 2 SSD drives in RAID-0 for my windows 7 OS. (Please note that I am aware of the issues with doing this, including lack of TRIM support when using RAID with SSD drives. I am OK with it not working as I can just re[place the drives in a year or so or wheneer they become more sluggish). SO here is my question part. If I assemble the motherboard, PSU, processor, RAM, vidm card, etc and then go to turn the PC on, it will have the 2 SSD drives hooked up. so I assume I will then soon the BIOS screen before I install windows? How to I go about making the 2 drives work in RAID-0 at this point? I do the raid part before installing my OS right? Please help with the steps involved from assembling the parts of the PC and then turning it on, to the part of getting the RAID-0 set up between the 2 drives and then installing my windows 7 OS from a Optical drive? Please help, all advice, instructions, tips appreciated as long as on topic. I do not need to be told that this is a bad idea as far as if 1 drive fails I losse it all, I plan on having a disk IMAGE to be able to restore my OS and software to a new set of drives at anytime needed in the event of drive failure. Same goes for lack of TRIM support. Thanks for reading and help =)

  Read the article

• Folder redirection GPO doesn't seem to be working

  - by user57999

  I've been trying to set up roaming profiles and folder redirection, but have hit a bit of a snag with the latter. This is exactly what I've done so far: (I have OU permissions and GPO permissions over my division's OU.) Created a group called Roaming-Users in the OU 'Groups' Added a single user (testuser) to the group Using the Group Policy Management tool (via RSAT on Windows 7) I right-clicked on the Groups OU and selected 'Create a GPO in this domain, and Link it here' Added my 'Roaming-Users' group to the Security Filtering section of the policy. Added the Folder Redirection option, specifically for Documents. It is set to redirect to: \myserver\Homes$\%USERNAME%\Documents (Homes$ exists and is sharing-enabled). Right-clicked on the policy under the Groups OU and checked Enforced. Logged into a machine as testuser successfully. Created a simple text file, saved some gibberish, logged off. Remoted into the server with Homes$ on it, noticed that the directory Homes$\testuser was created, but was empty. No text file to be found. From what I've read, I did everything I aught to...but I can't quite figure out the issue. I had no errors when I logged off about syncing issues (offline files is enabled) or anything, so I can only imagine my file should have ended up up on the share. Any ideas? EDIT: Using gpresult /R, I confirmed the user is in fact part of the Roaming-Users group, but does not have the policy applied, if that helps. EDIT 2: Apparently you can't apply GPOs to groups...so I applied to users and used the same security filter to limit it to my test user. Nothing happens as far as redirection goes, but I now have the following error in the event log: Folder redirection policy application has been delayed until the next logon because the group policy logon optimization is in effect

  Read the article

• Dell PS/2 Keyboard Stops Working Randomly After Power Disturbance

  - by Kenneth Murphy

  I have a Dell PS/2 keyboard connected to a desktop PC running Slackware 12.2 & Windows XP. After a recent, brief power outage/disturbance at my home, the keyboard has begun to quit working at random times. It has stopped at POST, but not by keyboard error -- I have to press the F1 key to continue booting, and at times the keyboard has already stopped working. Other times, the keyboard will work perfectly for a long time (a day or more) before it finally quits. It has stopped at boot, in Windows XP, and in Slackware. The led lights continue to work regardless. I have tried another PS/2 keyboard and it seems to be immune to this problem. The USB mouse always works. Does anyone have any ideas about how this might have happened? If this is related to the power disturbance that killed the power to the running PC, is it feasible that it would have only fried the keyboard itself (which still works sometimes) and not the PS/2 port nor anything else? I have experienced no other problems since the event.

  Read the article

• What can cause a kernel hang on redhat 4?

  - by Ivan Buttinoni

  I've to solve a nasty problem on a ten machine "cluster": randomly one of these machine hang during an hard computation, sometime still ping sometime not. The problem was described me at the phone, I've still no touch/see these machine, so I can't be more precise. It seem there's no (real) keyboard or monitor linked to them, so I haven't nothing about keyboard led or messages on monitor. Don't worry, what I really need is some suggestion where to search the problem, some suggestions on what can cause a kernel hang on a working machine. I also see this post, but seem same need on a different situation. My ideas since now: - HW problem (ram, cpu, fan etc.) - bad autofs configuration - bad nfs(?) configuration - presence of a trojan/hacker/etc - /dev/"swap" linked to /dev/zero - kernel out of memory(??) - kernel bugged In other words I try to imagine what kind of envent can occour that can crash the kernel insted of the application that generate the event. What hang have YOU experienced before? Write it to me! TIA

  Read the article

• Password Authentication Fails - NTLMv2

  - by JMeterX

  Environment: Windows 2000 sp4 EDIT: Domain Controller with no trust setup with the Win2008 Server Windows XP machines Windows 2008 Server Netapp NAS Problem: We have a shared folder that resides on a NAS using a Windows 2008 AD for the authentication with the proper permissions setup. When the Windows 2000 machine tries to open the share residing on the Win2008 machine, it is prompted for a username and password. Upon entering the credentials it continuously re-asks for credentials. Important Details: The Windows 2000 machine can ping both the XP machines and the Windows 2008 Server The Windows 2008 machine is mandated to only use NTLMv2 The Windows 2000 machine was originally set to NTLM but was recently switched to NTLMv2 if negotiated for the purpose of trying to connect to the share. As I am sure it will come up, we are using Windows 2000 because of contractual obligations Questions: Why is password Authentication failing in this case? After setting a GPO for the Win2000 machine for it to use NTLMv2, do we need to reboot the machine for the changes to take affect? We used SECEDIT to update the GPOs without rebooting. UPDATE We checked both of the 2008 Domain Controllers to find an error code. We received: Microsoft_Auth_Package_V1_0 0xc000006a Event ID: 4776 I know this to be an authentication error via THIS article "The value provided as the current password is not correct" We know this password to be correct, but since these two domains (Win2000 & Win2008) do not have a trust setup what authentication account needs to be used? One that resides on the Win2000 hosted domain?

  Read the article

• Application for time and project management

  - by user10826

  I want to improve the way I organize my projects/tasks/schedule What I do now is: keep an excel sheet with the name of the most important tasks/projects, I look at it at the beginning of each day and decide the ones I will focus on on iCal I write down events for each day, or for a concrete time (13 to 14 hours). I set up each day the tasks I want to accomlish, and allocate them hours I use Things (culture code) to keep info about tasks and projects not very important and which are not time allocated yet (GTD name = someday) I use Mail on Mac and create folders for the mails I want to process with the name of the different projects I save the main info for each project on freemind maps My system works well at the moment but it is pretty complicated to use. I want to make it better and I am looking for something with these requirements: must be 100% offline accessable it should use as less programs/resources as possible, ideally just one program should be able to manage all my info I can use the GTD methodology mixed with priorities and I can allocate each task converted to event on my calendar I can have different daily/weekly, etc views on a calendar to see the "big picture" must run on mac os x leopard price does not matter, I will pay for this So, according to your experience, can you recommend me something like this? Thanks

  Read the article

• How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

  - by Software Monkey

  I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

  Read the article

• Archive Manager, SQL 2005 and MaxTokenSize high CPU

  - by Tim Alexander

  So, I posted this question a few days ago: Impact of increasing the MaxTokenSize for Kerberos Tickets Since then the thought was to test our settings on two member servers, one with IIS and one without. I setup two GPOs to configure the MaxTokenSize reg setting to 48000 and MaxFieldLength/MaxRequestBytes to 64200 (based on MS KB2020943, these are set at 4/3 * T + 200). The member server seemed to work ok (a devalued tape backup server). The IIS server however has had some strange repercussions. The IIS Sserver host Quest Software Archive Manager (AM) 4.5 that communicates with SQL Server 2005 Enterprise on Server 2003 R2. After the changes all looked good until the SQL Server hit 100% CPU. I have removed the GPOS, removed the reg values and even replaced them with defaults (12000 for token size and can't remember the other one but was in a blog post about the issue in my other post). No change. Bouncing the IIS Server stops the high CPU and a colleague has looked at the SQL server and it is definitely the AM connection taking up the time/work on the SQL server. I haven't changed the reg values on the SQL server or the DCs but am reluctant to do so without understanding why this has happened. I am guessing its to do with the overriding auth and group issue we have but I am not seeing Kerberos errors in either event log. Has anyone seen something similar or does anyone have some tips? Was definitely blindsided by the Kerberos issue and am swimming against the tide to keep things functioning.

  Read the article

• Pivot table not refreshing sort order

  - by William Anthony

  I have Pivot Table that get its data source from another sheet, same workbook. I want the sort order of data is same as the data source order, I choose "Sort in data source order" in Pivot Table option. The problem is, when I change the data order on data source worksheet, then I refresh the Pivot Table, the sort order didn't change. I googled that the Pivot Table should be unlink first then re-link again in order to work properly, so I tried the following: The original data source has named range: origdata. The fake data source has names range: dummydata I changed manually data source to dummydata then changed back to origdata. The sort order did change as expected. Now I want to make the operation automated, so I'm using this code in Worksheet.activate event. Note that, PT is PivotTable instance. ... PT.SourceData = "dummydata" PT.RefreshTable PT.SourceData = "origdata" PT.RefreshTable ... Change data source from VBA didn't change the sort order just like I did with manual method. Why is that? Am I missing something? Maybe there are some routine called when I changed the data source manually via toolbar button? Thanks in advance for your help.

  Read the article

• IIS replication - Is it possible

  - by Ian

  Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

  Read the article

• Joining new DC to AD - DNS name does not exist

  - by Andrew Connell

  I had a DC fail on me recently and trying to add a new one to my domain, although I'm sensing I might have other issues in my domain. I'm a dev at heart and know just enough about AD to be dangerous so looking for some assistance. My working DC is RIVERCITY-DC12. I'm trying to promote RIVERCITY-DC14 as a DC to the RIVERCITY domain, but when I run DCPROMO, at the NETWORK CREDENTIALS step where I point to the name of the domain (rivercity.local), I get "An AD DC for the domain rivercity.local cannot be contacted" and in the details see "The error was DNS name does not exist" Looking at RIVERCITY-DC12, I can see DNS is working, I've been able to query it from other machines in my domain, and no errors are reported in the DNS category within the Event Viewer. When I checked the FMSO roles, it shows RIVERCITY-DC12 is the machine for all listed roles. Not sure what I should do next or how to troubleshoot/investigate after searching around for a solution... ideas? Environment: Domain: rivercity (rivercity.local) Forest functional level: Windows 2000 (I'm more than happy to raise this) Windows Server 2008 All servers are Windows Server 2008 R2 SP1 (fully patched)

  Read the article

• Percona-server time out on /etc/init.d/mysql start

  - by geekmenot

  Every time I start mysql, using /etc/init.d/mysql start or service mysql start, it always times out. * Starting MySQL (Percona Server) database server mysqld [fail] However, I can get into mysql. Just wanted to know if there is a problem with the install because it happens all the time, not a one off error. mysql-error.log shows: 121214 11:25:56 mysqld_safe Starting mysqld daemon with databases from /data/mysql/ 121214 11:25:56 [Note] Plugin 'FEDERATED' is disabled. 121214 11:25:56 InnoDB: The InnoDB memory heap is disabled 121214 11:25:56 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121214 11:25:56 InnoDB: Compressed tables use zlib 1.2.3 121214 11:25:56 InnoDB: Using Linux native AIO 121214 11:25:56 InnoDB: Initializing buffer pool, size = 14.0G 121214 11:25:58 InnoDB: Completed initialization of buffer pool 121214 11:26:01 InnoDB: Waiting for the background threads to start 121214 11:26:02 Percona XtraDB (http://www.percona.com) 1.1.8-rel29.2 started; log sequence number 9333955393950 121214 11:26:02 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 121214 11:26:02 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 121214 11:26:02 [Note] Server socket created on IP: '0.0.0.0'. 121214 11:26:02 [Note] Slave SQL thread initialized, starting replication in log 'mysql-bin.005163' at position 624540946, relay log '/data/mysql/mysql-relay-bin.000043' position: 624541092 121214 11:26:02 [Note] Slave I/O thread: connected to master '[email protected]:3306',replication started in log 'mysql-bin.005180' at position 823447620 121214 11:26:02 [Note] Event Scheduler: Loaded 0 events 121214 11:26:02 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.5.28-29.2-log' socket: '/data/mysql/mysql.sock' port: 3306 Percona Server (GPL), Release 29.2

  Read the article

• Mystery 0xc0000142 error on starting java from a service, as a different user.

  - by cpf

  This is a very convoluted setup, but effectively this is what goes down: Manager service (which I don't have control over) running as admin user X starts my executable, which then starts Java as user Y using the standard c# StartInfo.Username/Password controls. Now, from a basic (not elevated or anything, just admin) command prompt I can run that executable, and Java pops up and works fine, running perfectly under the user it should be. When the service runs the same executable, however, Java silently fails. The only hint I see is this series of events in the event viewer: Service starts "Application popup: java.exe - Application Error : The application was unable to start correctly (0xc0000142). Click OK to close the application. " (googling this reveals a lot of scam sites telling me to use their "free antivirus to fix 0xc0000142 errors easy!"... sigh) Service stops (the java shutdown propagated, which is supposed to happen) And here's what process explorer has for the failure: As you can see, everything shows as a success. Now, I think this might have something to do with the permissions (the user java.exe is running under has traverse permission for the entire drive and full permissions to Directory A, which is where the .jar is), but I just can't fathom how something that works fine from the command line (and, this is an upgrade, the previous system without the user-switching aspect works fine from the service) can fail with such a cryptic message and little showing up in logs.

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• WAMP starts Apache or Mysql, but not both?

  - by ladenedge

  When I install WAMP, the Apache and Mysql services are set to run as the LocalService user and all works well. However, because I need to access remote UNC paths in my PHP code, I need to run at least Apache as a user that exists on both the local host and the remote host - I'll call him WampUser. When both Apache and Mysql are set to start as WampUser, I cannot start both at the same time. If both are stopped, I can start either successfully. When I attempt to start the other, I get Error 1053: The service did not respond to the start or control request in a timely fashion. This error appears immediately - there is no timeout. When at least one of the services is set to start as LocalService, both start fine. I can, therefore, solve my problem by setting Apache to WampUser and Mysql to LocalService, but I'm more interested in why this is happening in the first place. I'm especially curious because this situation does not occur on other servers - something I've done to this server has made these two services exclusive when running as the same user. Here are some miscellaneous data points: I am using Windows Server 2003. I've provided recursive Full Control to the C:\wamp directory for WampUser. Nothing appears in the event log after the service fails. No log entries appear in either the Mysql log or the Apache error log. Neither application appears in the process list when the appropriate service is stopped. Any ideas?

  Read the article

• Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

  - by Nathan Ridley

  I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

  Read the article

• RD Gateway reporting features/capabilities

  - by Don

  We have just implemented RD Gateway for our own department in preparation for a push to the whole agency for telecommuting. It is all setup and working great, but I was trying to figure out how best to go about monitoring/reporting of users. I see third party software out there that will do it, but is there anything built-in or via powershell/scripting that I could use that would give me a report of the daily activity of users? Something to say, "User A connected at this time, was on for this long, sent/received this much data"? Basically some of the same stuff you can see in event viewer. Ideally I'd like to be able to have this setup so that once a day it emails me with the daily usage for when a supervisor asks about if their person is actually working (or at least online sending and receiving x amount of data), I'll have some metrics to give them. I realize that actual work output is relevant and more of a managerial issue, but I would like to be able to offer as much as I can from my end when asked. Thoughts? Thanks!

  Read the article

• libvirt's dnsmasq does not respond to dns queries or provide dhcp

  - by Jeremy

  This is on Ubuntu 10.04 server, using KVM to run Ubuntu guests. This system has been working for a long time and I have not changed anything (other than applying security updates), but today I found dnsmasq no longer responds to requests. I cannot say how long this has been broken for me because I don't frequently use the NAT'd guests. So it could have started just after the last updates or some other event and I just now found it. I can connect to port 53 with telnet at 192.168.122.1. I've flushed ip-tables to be sure it wasn't firewall rules and that is not the problem. dnsmasq is running, virsh reports default network as stared. I can't find ANY information on troubleshooting libvirt dnsmasq except that it won't play well with other instances of dnsmasq, which is not the problem. I cannot even find where log entries might be for this service. Any ideas on where to look for more information? edit to add: I added another network and that one works fine. I guess I have a workaround but would still like to figure out how to troubleshoot this problem.

  Read the article

• Computer sponteously reboots when doing heavy file copy to/from disk

  - by Mark Hosang

  I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

  Read the article

< Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >