Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 582/1185 | < Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >

  • recent unreliable wireless connection with Netgear KWGR614 router

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

    Read the article

  • Resolution changes when using switch

    - by Edward D
    So, the "real" resolution of my monitor is 1024x768. That's what I'd use on my docked Windows laptop, and what I'd use on my Xubuntu desktop connected directly. When I connect a switch, to switch between the two, however, the ubuntu machine's resolution changes. Everything's still proportional, and it still thinks it's doing 1024x768, but the icons and fonts appear larger. Not 800x600 larger, but still big. When I used Xubuntu Precise, I created an xorg.conf file to set a resolution of 1280x1024 which made it look the way it does without the switch ... as a workaround. When I upgraded to Trusty, I lost this. I tried to re-create it, but doesn't seem to load my file. Ideally, I'd like to correct the original problem, but I'd settle for being able to up the resolution. I searched for a while, and tried to do it, but I'm giving up ... please help me out. Controller: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04) Monitor: NEC MultiSync LCD 1850e http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf OS: Xubuntu 14.04 Trusty /etc/X11/xorg.conf: # YOU CREATED THIS FILE # sudo leafpad /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "NEC LCD1850E" # I found Synchronization Range at: # http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf HorizSync 31.0-82.0 VertRefresh 55.0-85.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "NEC LCD1850E" Device "Configured Video Device" SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" "848x480" "640x480" EndSubSection EndSection

    Read the article

  • Freescale One Box Unboxing (then installing Java SE Embedded technology)

    - by hinkmond
    So, I get a FedEx delivery the other day... "What cool device could be inside this FedEx Overnight Express Large Box?" I was wondering... Could it be a new Linux/ARM target device board, faster than a Raspberry Pi and better than a BeagleBone Black??? Why, yes! Yes, it was a Linux/ARM target device board, faster than anything around! It was a Freescale i.MX6 Sabre Smart Device Board (SDB)! Cool... Quad Core ARM Cortex A9 1GHz with 1GB of RAM. So, cool... I installed the Freescale One Box OpenWRT Linux image onto its SD card and booted it up into Linux. But, wait! One thing was missing... What was it? What could be missing? Why, it had no Java SE Embedded installed on it yet, of course! So, I went to the JDK 7u45 download link. Clicked on "Accept License Agreement", and clicked on "jdk-7u45-linux-arm-vfp-sflt.tar.gz", installed the bad boy, and all was good. Java SE Embedded 7u45 on a Freescale One Box. Nice... Hinkmond

    Read the article

  • recent unreliable wireless connection

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

    Read the article

  • Touchpad is recognized but not working on Toshiba P855-S5312 - Ubuntu 12.10

    - by user107942
    i just made a new fresh install of ubuntu 12.10, everything works nice but the touchpad istn working, it is recognized but it is not working, here a paste bin of what i get when I type "xinput list" http://paste.ubuntu.com/1357219/ b0w@b0w:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Genius Optical Mouse id=9 [slave pointer (2)] ? ? SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? TOSHIBA Web Camera - HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Toshiba input device id=13 [slave keyboard (3)] b0w@b0w:~$

    Read the article

  • How should I determine if a user is logged in graphically while lightdm is running?

    - by Jack
    I want to know if someone is logged into a local X-session. In the past I looked at the output of ck-list-sessions. The output looked something like this: Session12: unix-user = '[redacted]' realname = '[redacted]' seat = 'Seat1' session-type = '' active = TRUE x11-display = ':0' x11-display-device = '/dev/tty8' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2012-10-22T18:17:55.553236Z' login-session-id = '4294967295' If no one was logged in, there was no output. I checked if someone was logged in with ck_result" string => execresult("/usr/bin/ck-list-sessions | /bin/grep x11 | /usr/bin/cut --delimiter=\\' -f 2 | /usr/bin/wc -w This no longer works, because lightdm greeter looks like a logged in user Session12: unix-user = '[redacted]' realname = 'Light Display Manager' seat = 'Seat1' session-type = 'LoginWindow' active = TRUE x11-display = ':0' x11-display-device = '/dev/tty8' display-device = '' remote-host-name = '' is-local = TRUE on-since = '2012-10-22T22:17:55.553236Z' login-session-id = '4294967295' I guess I could check session-type, but I don't know how to do that and check x11-display in one-liner. I then need to write my own script, but at that point I thought I would check if anyone else has already done the work or if there is a way to get ConsoleKit to tell me what I want (or if I should be using a different tool)?

    Read the article

  • Is there a command to "manually automount" an attached disk?

    - by cheshirekow
    I have an extra hard drive which I use for backups. The label on its one and only partition is "backup". When I open nautilus and click on "backup" it mounds the drive in "/media/backup", and then there's a little eject button next to it's icon in nautilus. If I manually mount the drive by creating a directory and using "sudo mount /dev/sdx /some/dir", the eject icon still shows up in nautilus, but when I press it I get an error because the device was not mounted via whatever it is that mounts it the other way. What I would like is to be able to do this "mount to /media/backup and enable the eject button" via the command line. The goal is to have the device mounted by a script which needs the drive, but then leave it mounted until I manually eject it... if I want to. P.S. I'm aware that I can have the drive auto mounted at startup, but that's not what I'm looking for here, and I'd like to know if this is possible. Clarification: I'm looking for a command to "mount the drive the way nautilus would". This should create the directory "/media/backup", mount the device to that directory, and then when I press the eject button from nautilus, it should unmount the device and delete the directory.

    Read the article

  • How to debug lack of sound in Asus EEE PC

    - by Kalmar
    I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

    Read the article

  • How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

    - by racerror
    My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

    Read the article

  • Ubuntu installed along side Win 8 but not shown in boot

    - by Mahesha999
    Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

    Read the article

  • Can't configure 5.1 audio with 12.04

    - by xster
    I have an Intel ALC892 and a Nvidia GT 520m connected to speakers via HDMI. On lspci, I see 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ZOTAC International (MCO) Ltd. Device a218 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at db400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel 02:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 2180 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at db080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel My alsamixer looks like I enabled pulseaudio configuration file to have 6 channels. My sound setting looks like When I use the test dialog, only front left and right have sounds. If I use alsa in XBMC on a 5.1 video, there's no sound. If I use pulseaudio, only front right and left have sound. I can barely hear any speech since I'm guessing it's mapped to front center. Any clues?

    Read the article

  • Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

    - by pst007x
    I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

    Read the article

  • protected abstract override Foo(); &ndash; er... what?

    - by Muljadi Budiman
    A couple of weeks back, a co-worker was pondering a situation he was facing.  He was looking at the following class hierarchy: abstract class OriginalBase { protected virtual void Test() { } } abstract class SecondaryBase : OriginalBase { } class FirstConcrete : SecondaryBase { } class SecondConcrete : SecondaryBase { } Basically, the first 2 classes are abstract classes, but the OriginalBase class has Test implemented as a virtual method.  What he needed was to force concrete class implementations to provide a proper body for the Test method, but he can’t do mark the method as abstract since it is already implemented in the OriginalBase class. One way to solve this is to hide the original implementation and then force further derived classes to properly implemented another method that will replace it.  The code will look like the following: abstract class OriginalBase { protected virtual void Test() { } } abstract class SecondaryBase : OriginalBase { protected sealed override void Test() { Test2(); } protected abstract void Test2(); } class FirstConcrete : SecondaryBase { // Have to override Test2 here } class SecondConcrete : SecondaryBase { // Have to override Test2 here } With the above code, SecondaryBase class will seal the Test method so it can no longer be overridden.  Then it also made an abstract method Test2 available, which will force the concrete classes to override and provide the proper implementation.  Calling Test will properly call the proper Test2 implementation in each respective concrete classes. I was wondering if there’s a way to tell the compiler to treat the Test method in SecondaryBase as abstract, and apparently you can, by combining the abstract and override keywords.  The code looks like the following: abstract class OriginalBase { protected virtual void Test() { } } abstract class SecondaryBase : OriginalBase { protected abstract override void Test(); } class FirstConcrete : SecondaryBase { // Have to override Test here } class SecondConcrete : SecondaryBase { // Have to override Test here } The method signature makes it look a bit funky, because most people will treat the override keyword to mean you then need to provide the implementation as well, but the effect is exactly as we desired.  The concepts are still valid: you’re overriding the Test method from its original implementation in the OriginalBase class, but you don’t want to implement it, rather you want to classes that derive from SecondaryBase to provide the proper implementation, so you also make it as an abstract method. I don’t think I’ve ever seen this before in the wild, so it was pretty neat to find that the compiler does support this case.

    Read the article

  • Dual monitor display 12.04?

    - by MrMonty
    I have 2 beautiful 27" asus monitors. I started trying out Ubuntu 12.04 and now only one works and thats vga .. Any help here cause I'm stumped. I have a bfg tech nivida Geforce 8800 gt 512mb and I'm trying to fix this. Getting this error Wen i try to configure the xorg file Failed to set MetaMode (1) 'DFP-0: 1280x1024 @1280x1024 +0+0, DFP-1: 1280x1024 @1280x1024 +1280+0' (Mode 2560x1024, id: 50) on X screen 0. ........................................................................................... This is the xorg.conf ....................................................... nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Removed Option "Xinerama" "1" Removed Option "Xinerama" "0" Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Removed Option "TwinView" "1" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection FILE ^^^^

    Read the article

  • Developing with Oracle ADF Mobile and ADF Business Components Backend

    - by Shay Shmeltzer
    It's great to finally have the Oracle ADF Mobile solution out there. If you are not familiar with ADF Mobile - it basically lets you build applications that run on iOS and Android devices using the concepts you already know - components based UI constructions (same idea as JSF), taskflows, data controls, Java and of course JDeveloper. I created one demo that shows how to build an on-device application that gets data from local Java files (that run on the device - yes we do Java on iOS too) - you can see it here. However, one thing many of you might be wondering is how can you get data from your database into these mobile applications. Well if you already built your data access with Oracle ADF Business Components then here is a two step video demo that shows you what to do. The steps are: 1. Expose ADF Business Components as Services 2. Create an ADF Mobile application that consumes the above services with the Web service data control Simple right? That's the whole point of ADF Mobile - making on device application development as simple as possible. Try it out on your device.

    Read the article

  • Disable touchpad tap to click on Oneiric ocelot

    - by AWE
    You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

    Read the article

  • Using onboard and pci-e graphics card at the same time

    - by Endle
    Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

    Read the article

  • ALPS touchpad on DELL Inspiron I15RN-3647BK with Ubuntu 11.10 x64

    - by Miguel
    I can't make work the multitouch of the ALPS touchpad in my Dell Inspiron I15RN-3647BK with Ubuntu 11.10 x64, kernel 3.0.0-17-generic... I have tried with this driver but it doesn't work http://people.canonical.com/~sforshee/alps-touchpad/psmouse-alps-0.10/psmouse-alps-dkms_0.10_all.deb. This is the result from the following command: user@laptop:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Dell WMI hotkeys That came with or without the alps driver from canonical repository and the touchpad just works like a PS2 generic mouse... Any ideas? Thanks in advance...

    Read the article

  • Audio not working in 12.10

    - by frampy
    I did a clean install of 12.10, when I open Sound Settings in gnome the only device in the list is "Dummy Output", and sound is not working. Sound worked fine out of the box in 12.04 I ran alsamixer, it says my card is "HDA Intel", and chip is "Realtek ALC880". The alsamixer playback output was set to mute at first, unmuting did not fix. I checked out the info at http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/ as suggested on a similar question, I've done everything there except installing the ubuntu audio dev team driver. Should I try install this? Edit: I've been reading the sound troubleshooting guide at https://help.ubuntu.com/community/SoundTroubleshooting It looks like Ubuntu is finding my audio device correctly. mike@wucade:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Albatron Corp. Device 2668 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at d01c0000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Still stuck as to why this isn't working.

    Read the article

  • How can I configure the touchpad and keyboard settings on a Dell Inspiron 5110?

    - by Robik
    I am using ubuntu 11.10. I want the following 3 things: I have dell inspiron 5110 laptop. There is button at the top right corner of laptop which can be used for turning the screen off. It works in windows but it does not work in ubuntu 11.10. Even in the manual of the laptop, it the button is supported only in windows. Is there a way to activate it in ubuntu 11.10? Some of the keys like: "break" etc. are missing. Can I use other keys (or combinations of other keys) to function as those missing keys? In the program, "mouse and touchpad", there is no tab for touchpad. I want to enable vertical and horizontal scrolling. How do I do that? The command: xinput list shows Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys Please help!!

    Read the article

  • decouple software components via nameconvention

    - by csteinmueller
    I'm currently evaluating alternatives to refactor a drivermanagement. In my multitier architecture I have Baseclass DAL.Device //my entity Interfaces BL.IDriver //handles the dataprocessing between application and device BL.IDriverCreator //creates an IDriver from a Device BL.IDriverFactory //handles the driver creation requests Every specialization of Device has a corresponding IDriver implementation and a corresponding IDriverCreator implementation. At the moment the mapping is fix via a type check within the business layer / DriverFactory. That means every new driver needs a) changing code within the DriverFactory and b) referencing the new IDriver implementation / assembly. On a customers point of view that means, every new driver, used or not, needs a complex revalidation of their hardware environment, because it's a critical process. My first inspiration was to use a caliburn micro like nameconvention see Caliburn.Micro: Xaml Made Easy BL.RestDriver BL.RestDriverCreator DAL.RestDevice After receiving the RestDevicewithin the IDriverFactory I can load all driver dlls via reflection and do a namesplitting/comparing (extracting the xx from xxDriverCreator and xxDevice) Another idea would be a custom attribute (which also leads to comparing strings). My question: is that a good approach above layer borders? If not, what would be a good approach?

    Read the article

  • When should I decline to make a requested change?

    - by reuscam
    I work on the software side of a company that provides custom hardware with software running on top of it. Often times the hardware is not engineered well. In those cases, I am often asked first to troubleshoot the problem - of course the symptom is always "your software crashed" or something along those lines. Just recently we had another one of these incidents where power on a USB line is not reliable, and it causes a USB device to fail. This causes a usability problem in one of our applications. I have been asked by upper management to handle this better - continually monitor the USB device, and if it disappears, then reboot, or try to reset it. Doing either of these is not guaranteed to fix anything. Ultimately, the real fix is to correct the reliability of the device from the hardware side. I could improve performance, but not to 100%, and of course I would be using my already limited time to bloat code and add yet another device monitoring thread. So with all that said, how do I make a good decision about when to say that this needs to be a hardware fix, and only a hardware fix? Can I approach this quantitatively, and come up with some sort of definitive yes/no test? I'm sure its not that easy.

    Read the article

  • ???????????????????1(?????? ???)

    - by rika.tokumichi
    ??????OTN????????? ????????????????????????/????????????Developers Summit?(????)????????! ?????????????????????????????????????????????????????????????????????^^ -------------------------------------------- ???:????(??????????????????????????????) ???:??????(Fusion Middleware?????? Fusion Middleware???????? ??????????????) -------------------------------------------- ??????????????????????????? ??????????????2?????????·????????? ???????????????··· ??????????? ??????????OS???????Java?????(Oracle JRockit Virtual Edition)??? ?????????????1??????????????????????·????(Oracle Automatic Storage Management: Oracle ASM)??? ?3????? ???????????????????????????????? ????????????? ?Oracle JRockit Virtual Edition? ???????????????? ????????????????? ------------------- ¦??????????? ????????????????????????????????????????????????????????????????·???????????????????????????????????????????(??) ????·?????????????????????????????IaaS?PaaS?SaaS?????????????????????????????????????????????????·???????????·???? (???????????????) ??????????···· >????????????? ¦Oracle JRockit Virtual Edition ?Oracle JRockit???Java????? (JVM)?Oracle JRockit JVM?????????????????????·???????????????????????????·???????????JVM?Oracle JRockit Real Time???JVM???/??/????????·????Oracle JRockit Mission Control??????? (??) ??Oracle JRockit?????????????????Oracle JRockit Virtual Edition?(JRockit VE) ???????? ??????·??????????????????????????????????????????Java?????????????????????????H/W?Java?????????????????????????OS?JVM?????/????????3?????????????··· >????????????? ------------------- ???SlideShare???????????????????????????? >SlideShare??????????????2?????????·????????????? >Developers Summit 2010(????2010)??Web??? ???????????????????·?????????????????????????????????????! ?????!

    Read the article

  • nhibernate fatal error

    - by Afif Lamloumi
    i have an error ( System.InvalidCastException: Unable to cast object of type 'AccountProxy' to type 'System.String'.) when i did this code i mapped the tables( Account,AccountString,EventData,...) of the the database opengts ( open source) i have this error when i called a function from EventData.cs IQuery query = session.CreateQuery("FROM Eventdata"); IList pets = query.List(); return pets; the Stack Trace: [InvalidCastException: Impossible d'effectuer un cast d'un objet de type 'AccountProxy' en type 'System.String'.] (Object , Object[] , SetterCallback ) +431 NHibernate.Bytecode.Lightweight.AccessOptimizer.SetPropertyValues(Object target, Object[] values) +20 NHibernate.Tuple.Component.PocoComponentTuplizer.SetPropertyValues(Object component, Object[] values) +49 NHibernate.Type.ComponentType.SetPropertyValues(Object component, Object[] values, EntityMode entityMode) +34 NHibernate.Type.ComponentType.ResolveIdentifier(Object value, ISessionImplementor session, Object owner) +150 NHibernate.Type.ComponentType.NullSafeGet(IDataReader rs, String[] names, ISessionImplementor session, Object owner) +42 NHibernate.Loader.Loader.GetKeyFromResultSet(Int32 i, IEntityPersister persister, Object id, IDataReader rs, ISessionImplementor session) +93 NHibernate.Loader.Loader.GetRowFromResultSet(IDataReader resultSet, ISessionImplementor session, QueryParameters queryParameters, LockMode[] lockModeArray, EntityKey optionalObjectKey, IList hydratedObjects, EntityKey[] keys, Boolean returnProxies) +92 NHibernate.Loader.Loader.DoQuery(ISessionImplementor session, QueryParameters queryParameters, Boolean returnProxies) +675 NHibernate.Loader.Loader.DoQueryAndInitializeNonLazyCollections(ISessionImplementor session, QueryParameters queryParameters, Boolean returnProxies) +129 NHibernate.Loader.Loader.DoList(ISessionImplementor session, QueryParameters queryParameters) +116 [GenericADOException: could not execute query [ select eventdata0_.deviceID as deviceID5_, eventdata0_.timestamp as timestamp5_, eventdata0_.statusCode as statusCode5_, eventdata0_.accountID as accountID5_, eventdata0_.latitude as latitude5_, eventdata0_.longitude as longitude5_, eventdata0_.gpsAge as gpsAge5_, eventdata0_.speedKPH as speedKPH5_, eventdata0_.heading as heading5_, eventdata0_.altitude as altitude5_, eventdata0_.transportID as transpo11_5_, eventdata0_.inputMask as inputMask5_, eventdata0_.outputMask as outputMask5_, eventdata0_.address as address5_, eventdata0_.DataSource as DataSource5_, eventdata0_.rawdata as rawdata5_, eventdata0_.distanceKM as distanceKM5_, eventdata0_.odometerKM as odometerKM5_, eventdata0_.geozoneIndex as geozone19_5_, eventdata0_.geozoneID as geozoneID5_, eventdata0_.creationTime as creatio21_5_ from eventdata eventdata0_ ] [SQL: select eventdata0_.deviceID as deviceID5_, eventdata0_.timestamp as timestamp5_, eventdata0_.statusCode as statusCode5_, eventdata0_.accountID as accountID5_, eventdata0_.latitude as latitude5_, eventdata0_.longitude as longitude5_, eventdata0_.gpsAge as gpsAge5_, eventdata0_.speedKPH as speedKPH5_, eventdata0_.heading as heading5_, eventdata0_.altitude as altitude5_, eventdata0_.transportID as transpo11_5_, eventdata0_.inputMask as inputMask5_, eventdata0_.outputMask as outputMask5_, eventdata0_.address as address5_, eventdata0_.DataSource as DataSource5_, eventdata0_.rawdata as rawdata5_, eventdata0_.distanceKM as distanceKM5_, eventdata0_.odometerKM as odometerKM5_, eventdata0_.geozoneIndex as geozone19_5_, eventdata0_.geozoneID as geozoneID5_, eventdata0_.creationTime as creatio21_5_ from eventdata eventdata0_]] NHibernate.Loader.Loader.DoList(ISessionImplementor session, QueryParameters queryParameters) +213 NHibernate.Loader.Loader.ListIgnoreQueryCache(ISessionImplementor session, QueryParameters queryParameters) +18 NHibernate.Loader.Loader.List(ISessionImplementor session, QueryParameters queryParameters, ISet`1 querySpaces, IType[] resultTypes) +79 NHibernate.Hql.Ast.ANTLR.Loader.QueryLoader.List(ISessionImplementor session, QueryParameters queryParameters) +51 NHibernate.Hql.Ast.ANTLR.QueryTranslatorImpl.List(ISessionImplementor session, QueryParameters queryParameters) +231 NHibernate.Engine.Query.HQLQueryPlan.PerformList(QueryParameters queryParameters, ISessionImplementor session, IList results) +369 NHibernate.Impl.SessionImpl.List(String query, QueryParameters queryParameters, IList results) +317 NHibernate.Impl.SessionImpl.List(String query, QueryParameters parameters) +282 NHibernate.Impl.QueryImpl.List() +163 DATA1.EventdataExtensions.GetEventdata() in C:\Users\HP\Desktop\our_project\DATA1\Queries\Eventdata.cs:33 MvcApplication7.Controllers.HistoriqueController.Index() in C:\Users\HP\Desktop\our_project\MvcApplication7\Controllers\HistoriqueController.cs:17 lambda_method(Closure , ControllerBase , Object[] ) +62 System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +17 System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +208 System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27 System.Web.Mvc.<>c__DisplayClass15.<InvokeActionMethodWithFilters>b__12() +55 System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func`1 continuation) +263 System.Web.Mvc.<>c__DisplayClass17.<InvokeActionMethodWithFilters>b__14() +19 System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodWithFilters(ControllerContext controllerContext, IList`1 filters, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +191 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +343 System.Web.Mvc.Controller.ExecuteCore() +116 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +97 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +10 System.Web.Mvc.<>c__DisplayClassb.<BeginProcessRequest>b__5() +37 System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() +21 System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +12 System.Web.Mvc.Async.WrappedAsyncResult`1.End() +62 System.Web.Mvc.<>c__DisplayClasse.<EndProcessRequest>b__d() +50 System.Web.Mvc.SecurityUtil.<GetCallInAppTrustThunk>b__0(Action f) +7 System.Web.Mvc.SecurityUtil.ProcessInApplicationTrust(Action action) +22 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +60 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8841105 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +184 Any suggestions? how can correct this error Data entity class (outtake from comment): public class MyClass { public virtual string DeviceID { get; set; } public virtual int Timestamp { get; set; } public virtual string Account { get; set; } public virtual int StatusCode { get; set; } public virtual double Latitude { get; set; } public virtual double Longitude { get; set; } public virtual int GpsAge { get; set; } public virtual double SpeedKPH { get; set; } public virtual double Heading { get; set; } public override bool Equals(object obj) { return true; } public override int GetHashCode() { return 0; } }

    Read the article

  • How can I Include Multiples Tables in my linq to entities eager loading using mvc4 C#

    - by EBENEZER CURVELLO
    I have 6 classes and I try to use linq to Entities to get the SiglaUF information of the last deeper table (in the view - MVC). The problem is I receive the following error: "The ObjectContext instance has been disposed and can no longer be used for operations that require a connection." The view is like that: > @model IEnumerable<DiskPizzaDelivery.Models.EnderecoCliente> > @foreach (var item in Model) { > @Html.DisplayFor(modelItem => item.CEP.Cidade.UF.SiglaUF) > } The query that i use: var cliente = context.Clientes .Include(e => e.Enderecos) .Include(e1 => e1.Enderecos.Select(cep => cep.CEP)) .SingleOrDefault(); The question is: How Can I improve this query to pre loading (eager loading) "Cidade" and "UF"? See below the classes: public partial class Cliente { [Key] [DatabaseGeneratedAttribute(DatabaseGeneratedOption.Identity)] public int IdCliente { get; set; } public string Email { get; set; } public string Senha { get; set; } public virtual ICollection<EnderecoCliente> Enderecos { get; set; } } public partial class EnderecoCliente { public int IdEndereco { get; set; } public int IdCliente { get; set; } public string CEPEndereco { get; set; } public string Numero { get; set; } public string Complemento { get; set; } public string PontoReferencia { get; set; } public virtual Cliente Cliente { get; set; } public virtual CEP CEP { get; set; } } public partial class CEP { public string CodCep { get; set; } public string Tipo_Logradouro { get; set; } public string Logradouro { get; set; } public string Bairro { get; set; } public int CodigoUF { get; set; } public int CodigoCidade { get; set; } public virtual Cidade Cidade { get; set; } } public partial class Cidade { public int CodigoCidade { get; set; } public string NomeCidade { get; set; } public int CodigoUF { get; set; } public virtual ICollection<CEP> CEPs { get; set; } public virtual UF UF { get; set; } public virtual ICollection<UF> UFs { get; set; } } public partial class UF { public int CodigoUF { get; set; } public string SiglaUF { get; set; } public string NomeUF { get; set; } public int CodigoCidadeCapital { get; set; } public virtual ICollection<Cidade> Cidades { get; set; } public virtual Cidade Cidade { get; set; } } var cliente = context.Clientes .Where(c => c.Email == email) .Where(c => c.Senha == senha) .Include(e => e.Enderecos) .Include(e1 => e1.Enderecos.Select(cep => cep.CEP)) .SingleOrDefault(); Thanks!

    Read the article

< Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >