Search Results

Search found 46019 results on 1841 pages for 'version control'.

Page 583/1841 | < Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >

  • snmptt not translating traps, even with translate_log_trap_oid=1

    - by mbrownnyc
    I am having some trouble configuring snmptt to properly translate snmp traps. The following is a problem: /etc/snmp/snmptt.conf reflects: EVENT fgFmTrapIfChange .1.3.6.1.4.1.12356.101.6.0.1004 "Status Events" Critical FORMAT $* EXEC /usr/local/nagios/libexec/eventhandlers/submit_check_result $r "snmp_traps" 2 "$O: $+*" "$*" SDESC Trap is sent to the managing FortiManager if an interface IP is changed Variables: 1: fnSysSerial 2: ifName 3: fgManIfIp 4: fgManIfMask EDESC when a trap is received, /var/log/messages reflects: Sep 6 12:07:32 SNMPMANAGERHOST snmptrapd[15385]: 2012-09-06 12:07:32 <UNKNOWN> [UDP: [192.168.100.2]:162->[192.168.100.31]]: #012.1.3.6.1.2.1.1.3.0 = Timeticks: (707253943) 81 days, 20:35:39.43 #011.1.3.6.1.6.3.1.1.4.1.0 = OID: .1.3.6.1.4.1.12356.101.6.0.1004 #011.1.3.6.1.4.1.12356.100.1.1.1.0 = STRING: FGTNNNNNNNNN #011.1.3.6.1.2.1.31.1.1.1.1.10 = STRING: internal4 #011.1.3.6.1.4.1.12356.101.6.2.1.0 = IpAddress: 192.168.65.100 #011.1.3.6.1.4.1.12356.101.6.2.2.0 = IpAddress: 255.255.255.0 Sep 6 12:07:37 SNMPMANAGERHOST icinga: EXTERNAL COMMAND: PROCESS_SERVICE_CHECK_RESULT; 192.168.100.2; snmp_traps; 2; enterprises.12356.101.6.0.1004: enterprises.12356.100.1.1.1.0:FGTNNNNNNNNN ifName.10:internal4 enterprises.12356.101.6.2.1.0:192.168.65.100 enterprises.12356.101.6.2.2.0:255.255.255.0 Since the icinga entry reflects the EXEC, it's obvious there is no translations occurring by snmptt. I have verified that translate_log_trap_oid and net_snmp_perl_enable is enabled in snmptt.ini When using --debug=1 to start snmptt, I see the following in the --debugfile: ********** Net-SNMP version 5.05 Perl module enabled ********** The main NET-SNMP version is reported as NET-SNMP version: 5.5. What else can be done to verify that snmptt is configured properly to translate traps? I have run snmptt-net-snmp-test to verify whatever net-snmp-perl version I have installed properly supports translations. The output indicates it does. /root/snmptt_1.3/snmptt-net-snmp-test --best_guess=2 SNMPTT Net-SNMP Test v1.0 (c) 2003 Alex Burger http://snmptt.sourceforge.net MIBS:RFC1213-MIB best_guess: 2 Testing translateObj ******************** Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=disabled Test passed. Result: sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=disabled, include_module=enabled Test passed. Result: RFC1213-MIB::sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=disabled Test passed. Result: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: .1.3.6.1.2.1.1.1, long_names=enabled, include_module=enabled Test passed. Result: RFC1213-MIB::.iso.org.dod.internet.mgmt.mib-2.system.sysDescr Testing: sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: RFC1213-MIB::system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing: .iso.org.dod.internet.mgmt.mib-2.system.sysDescr, long_names=disabled, include_module=disabled Test passed. Result: .1.3.6.1.2.1.1.1 Testing getType *************** Testing: .1.3.6.1.2.1.4.1 Test passed. Result: INTEGER Testing: ipForwarding Test passed. Result: INTEGER Testing Description ******************* Test passed. Result: ------------------------------------------------- The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value. ------------------------------------------------- I have manually gone through the MIB with the definition that's not resolving, and verified that it is properly linking back to the proper resolved definition. It is: FORTINET-FORTIGATE-MIB.txt contains: fgFmTrapIfChange NOTIFICATION-TYPE OBJECTS { fnSysSerial, ifName, fgManIfIp, fgManIfMask } STATUS current DESCRIPTION "Trap is sent to the managing FortiManager if an interface IP is changed" ::= { fgFmTrapPrefix 1004 } fgFmTrapPrefix OBJECT IDENTIFIER ::= { fgMgmt 0 } fgMgmt OBJECT IDENTIFIER ::= { fnFortiGateMib 6 } fnFortiGateMib ::= { fortinet 101 } IMPORTS FnBoolState, FnIndex, fnAdminEntry, fnSysSerial, fortinet FROM FORTINET-CORE-MIB fortinet MODULE-IDENTITY ::= { enterprises 12356 } LOOKS GOOD!!!!! 1.3.6.1.4.1.12356.101.6.0.1004 I've exhausted all the documentation and even posted fruitlessly in the snmptt-users mailing list. I can not prove it is the MIB. Why would snmptt fail to translate traps? Thanks, Matt

    Read the article

  • Why are my USB 2.0 devices hanging Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a DFI CM33-TL/G ATX (identified using SiSoft Sandra) motherboard hosting an Intel Celeron 1.3GHz CPU, 768Mb PC133 SDRAM, a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board based on the NEC uPD720102 chipset containing 3 external and 1 internal USB sockets. It's also hosting a 1.44Mb floppy drive on FDD0, a new 80Gb Western Digital hard drive running as master on IDE0 and a Panasonic DVD+/-RW running as master on IDE1. All this is sitting in a slimline case running off a Macron Power MPT-135 135W Flex power supply. The motherboard is running a version of Award BIOS 05/24/2002-601T-686B-6A6LID4AC-00. Could this be updated? If so, from where? I've raked through the manufacturer's website but can't find any hint of downloads for either drivers or BIOS updates. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Scan to email messages downloaded by POP connector on SBS 2008 are delivered to badmail folder.

    - by Jon
    I have a Kyocera MFD. I have it set to scan to email using the ISP's SMTP server. The messages are delivered and received by the hosted email server. The POP connector on the SBS server downloads the messages, but delivers them to the badmail folder. I have given the message a subject and a body. Spam score from message header: MIME-Version: 1.0 X-Mailer: NetWorkScanner Mail System Version 1.1 Content-Type: multipart/mixed; boundary="------------V2VkLCAxMCBNYXIgMjAxMCAxMjoxOToxNSArMDAwMA==" X-Spam-Status: No, score=-2.6 X-Spam-Score: -25 X-Spam-Bar: -- X-Spam-Flag: NO --------------V2VkLCAxMCBNYXIgMjAxMCAxMjoxOToxNSArMDAwMA== Content-Type: text/plain; charset="us-ascii"

    Read the article

  • Installing isolated instance of MySQL on Windows using silent install with .msi

    - by Abram
    I'm trying to write an installer for an internal application we wrote. After it installs our application it then installs MySQL using the .msi installer in silent mode. I specify the install dir and data dir to that of a directory within my application's install directory, such as: msiexec /i @@MYSQL_INSTALLER_FILE@@ /qn INSTALLDIR="@@INSTALL_DIR@@\MySQL\" DATADIR="@@INSTALL_DIR@@\MySQL\" USERNAME="@@DB_USER@@" PASSWORD="@@DB_PASS@@" (the @@variable@@'s are replace by my installer routine using InstallJammer) Once installed, I use mysqld.exe to install a windows service with a custom service name and defaults file like so: mysqld.exe --install CustomMySQL --defaults-file="@@INSTALL_DIR@@\MySQL\my.ini" This works fine as long as there is not already another instance of MySQL installed. If there is it silently fails to install MySQL. Running the msi installer manually (double-click) shows an error that a previous version is already installed and just aborts. Is there a way to automate installing MySQL as an isolated instance, regardless of whether another version/instance is already installed?

    Read the article

  • Java works under Firefox but crashes Internet Explorer

    - by Dominic Grenier
    Java works under Firefox and Chrome but not under IE. Here's what I tried (the advice normally given on forums): Java applet activated in tools - internet options - security tab - personnalise - Java applets Activated in tools - manage add-ons - tool bars and extensions - Java (tm) SSV2 helper - Activate Activated in tools - internet options - advanced tab - Use JRE for applet I've also deleted my temporary internet files (with Ccleaner), Reinstalled IE8 It is also set as the default Java for IE through the control panel - Java - Advanced tab - default Java for browsers - Microsoft Internet Explorer IE version: 8.0.6001.18702 Java version: 1.7.0_03. (also tried with 1.6.0_31) Windows XP SP3. Any advice? Thanks :) edit: I have activated the ActiveX controls through manage add-ons - all add-ons but now, although the coffe cup loading screen appears (which did not before) it makes IE crash (which is new). I might have fiddled too much with the registry by trying to completely remove Java to reinstall it, so I ran "rereg" (a tool to repair dlls and their registry entries) without success.

    Read the article

  • Logrotate Successful, original file goes back to original size

    - by drewrockshard
    Has anyone had any issues with logrotate before that causes a log file to get rotated and then go back to the same size it originally was? Here's my findings: Logrotate Script: /var/log/mylogfile.log { rotate 7 daily compress olddir /log_archives missingok notifempty copytruncate } Verbose Output of Logrotate: copying /var/log/mylogfile.log to /log_archives/mylogfile.log.1 truncating /var/log/mylogfile.log compressing log with: /bin/gzip removing old log /log_archives/mylogfile.log.8.gz Log file after truncate happens [root@server ~]# ls -lh /var/log/mylogfile.log -rw-rw-r-- 1 part1 part1 0 Jan 11 17:32 /var/log/mylogfile.log Literally Seconds Later: [root@server ~]# ls -lh /var/log/mylogfile.log -rw-rw-r-- 1 part1 part1 3.5G Jan 11 17:32 /var/log/mylogfile.log RHEL Version: [root@server ~]# cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 4) Logrotate Version: [root@DAA21529WWW370 ~]# rpm -qa | grep logrotate logrotate-3.7.1-10.RHEL4 Few Notes: Service can't be restarted on the fly, so that's why I'm using copytruncate Logs are rotating every night, according to the olddir directory having log files in it from each night.

    Read the article

  • How to sync two computers using new MobileMe calendar

    - by CesarGon
    I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

    Read the article

  • Why /home folder is missing from my backup archive created by tar?

    - by Konstantin Pereyaslov
    So I'm doing full backup of my VPS using the following command (as root, of course): tar czvf 20120604.tar.gz / Everything seems to be fine, all files seem to appear in the list. The size of archive is 6 Gb and gunzipped version is 11 Gb which includes /home, because I totally have 11 Gb of data on VPS. But when I try actually to unpack archive, or open it using mc or WinRAR, there's no /home folder. And WinRAR tells 20120604.tar.gz - TAR+GZIP archive, unpacked size 894 841 346 bytes. It can't be WinRAR's bug, because when I type tar xzvf 20120604.tar.gz, /home folder isn't unpacked either. Why is /home folder missing from my archive? And what can I do to include it there? tar --version outputs the following: tar (GNU tar) 1.15.1

    Read the article

  • Win 7 dual monitor: Don't move application windows when turn off second monitor

    - by codewaggle
    The title is correct, it should say "Don't" not "Doesn't". I Don't want the application windows to be moved to the main monitor when I turn off the monitors. On my Win XP dual monitor system, I can turn off the monitors and when I turn them back on, the application windows are in the same locations on the same monitors as when I turned the monitors off. On the Win 7 system, every time I turn off the monitors (or just the second monitor), all of the application windows are moved to the "main" monitor. After experimenting with the settings, I've found one process that enables me to turn off the monitors and still keep my application windows laid out in my chosen locations on the two monitors: 1) Switch the display setting to a single monitor. 2) Turn off the monitors. 3) Turn on the monitors. 4) Switch the display setting back to "Extend these Displays". After step 4, the application windows that I had laid out on the second monitor are moved back to their original locations on the second monitor. Is there a windows or nVidia setting that would leave the application windows on the second monitor so that I don't need to switch the display settings every time I turn off the monitors? Specs: Windows 7 64-bit dual monitors (1 DP, 1 DVI) Desktop (most questions seem to be about laptops) nVidia Quadro 2000 nVidia Control Panel nVidia nView Control Panel

    Read the article

  • MSE updating fails, no warning or error message.

    - by WebDevHobo
    I'm running Windows 7 Ultimate, 32-bit. For the last couple of days, MSE doesn't fails to update, remaining stuck at version 1.75.119 I presume that an error log is created somewhere, or an event log, but I don't know where to find those. It just says "connection failed". Tried it at home, at work and friends places, but never works. Restarted computer a lot of times now, checked for Microsoft Updates in general, but nothing shows up. EDIT: I've opened a bounty for this, because I really don't know what to do anymore. The oldest answer(the long post) here did not work. Besides this problem, I'm having trouble using MSI installers too. I've had to add the SYSTEM group to a lot of maps and give them full control, but shouldn't the SYSTEM already be there? Also, I had to remove the "read-only" attribute from the ProgramData and Users folders, add the SYSTEM group there too and give them full control. Only then will the MSI install work and even then, it says I doesn't have the rights to create a shortcut on the desktop. Don't know what I need to modify and where for that. I'm saying this because I don't know how MSE updates, but if they use MSI files to do that, that might explain things. The SYSTEM group remains added, but every time I take away the read only attribute, click OK and check the settings again, read-only is still active... That's all I know. Screenshot, all those updates were manual:

    Read the article

  • How do I make h.264 work on YouTube on Firefox on Windows 7 64 bit?

    - by Ansis Malins
    Various news articles state that Firefox supports h.264 on Windows since version 20. As of this writing the version is 24, yet Firefox still can't play most YouTube videos. I did the HTML5 opt-in and tested both Firefox and Nightly. I also made sure media.windows-media-foundation.enabled in about:config is enabled, and it is by default both on Firefox and Nightly. What's wrong and how do I fix it? Edit: This video works. This video fails. They're both MP4 (right click video - stats for nerds), so Firefox's h.264 support works at least some of the time. Edit: When I go to a YouTube video that doesn't work, click Share - Embed and then copy-paste the src of the iframe tag into the address bar, the video works.

    Read the article

  • Kernel upgrade CentOS 5.3 mount: could not find filesystem '/dev/root'

    - by matt
    We have a CentOS 5.3 x64 server that by default runs kernel version 2.6.18-164.11.1 and we are attempting to upgrade the box to 2.6.31.12 The drive is LVM +ext3, and the problem I'm having is when I upgrade the kernel and attempt to boot from it, no matter what version of the kernel I use, I get /dev/root not found towards the end of the boot process, and the kernel panics, and than reboots. I'm installing the kernel exactly as it says in this doc. I've tried it "The centOS way " using make rpm and than installing that. I've updated my mkinitrd. The most interesting part of this problem is that it has been so frustrating that I decided to try and clean install centos on an identical machine without LVM, and the result is EXACTLY the same. After upgrading the kernel, I get /dev/root not found. Does anyone know how to fix this, or what information would be relevant to remedy it? I'm open to try anything at this point. One more interesting thing about this problem is that in the new version of the kernel, during boot it complains that dm-mapper is started twice, than panics right after that. I've tried this with other kernel versions, and the result is the same. What am I missing here? If you need any more files, please just ask. Linux cg 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 07:32:21 EST 2010 x86_64 x86_64 x86_64 GNU/Linux /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 default=1 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title CentOS (2.6.31.12-rt20) //NOT WORKING!!!! root (hd0,0) kernel /vmlinuz-2.6.31.12-rt20 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.31.12-rt20.img title CentOS (2.6.18-164.11.1.el5) //WORKING!! root (hd0,0) kernel /vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/VolGroup00/LogVol00 isolcpus=8,9,10,11,12,13,14,15 panic=10 initrd /initrd-2.6.18-164.11.1.el5.img

    Read the article

  • Why does Komodo edit not open files on doubleclick due to some path encoding error?

    - by gakera
    When I double click a file in finder to open in Komodo edit, it displays an error message saying it can't find the file and the path is displayed, but with wrong encoding, such that special characters such as "ó" and "ð" are displayed as some weird boxes. Screenshot: http://i51.tinypic.com/2qkleg4.jpg I'm running OSX Snow Leopard 10.6.4 and Komodo Edit version 5: "Komodo Edit, version 5.2.4, build 4343, platform macosx-x86. Built on Tue Dec 8 18:18:35 2009." When I drag the file into Komodo edit it opens just fine displaying the path correctly with "ó"s and all :P This doesn't happen if I right click the file in finder and select to open it with TextEdit or Word or (God forbid) MacVim - only when I select to open it in Komodo edit. This is annoying as all hell.

    Read the article

  • How can I configure apache to cache the images that it is serving? Right now it is giving headers t

    - by Tchalvak
    Serving up images that don't seem to cache There's a LAPP (postgresql instead of mysql) running over on http://ninjawars.net. I just recently noticed that images don't seem to be caching with any kind of good frequency as I was reloading a page with a few images on it here: http://www.ninjawars.net/attack_player.php Here is an example image (they're probably all being served exactly the same): http://www.ninjawars.net/images/characters/fighter.png Checking the header, it seems that the caching is set to: Cache-Control:max-age=0 (the full header for this image-like-all-the-others is... Request URL:http://www.ninjawars.net/images/characters/fighter.png Request Method:GET Status Code:200 OK Request Headers Accept:application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Cache-Control:max-age=0 Referer:http://www.ninjawars.net/images/characters/fighter.png User-Agent:Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.3 Safari/533.4 Response Headers Accept-Ranges:bytes Content-Length:938 Content-Type:image/png Date:Thu, 13 May 2010 21:24:07 GMT ETag:"ffd4d-3aa-4837efc120540" Last-Modified:Mon, 05 Apr 2010 15:28:45 GMT Server:Apache ) So what modules or config or htaccess or whatever do I change to have it cache images, e.g. for 24 hours?

    Read the article

  • Is there an high quality natural text reader for the mac?

    - by Another Registered User
    I'm reading about 150 pages of text on screen, every day. I will have to read about 15.000 in the next upcoming months. No joke. Well, the problem is this: I suffer from a sort of attention deficit hyperactivity disorder which forces me to read every sentence up to 10 times until I really get it. Mac OS X Snow Leopard has a built-in text reader with the name "Alex". Although it is already pretty good quality, I know there are far better natural sounding voices out there. I have heard already voices that are absolutely amazing compared to Alex. They're so good, that you can't tell anymore the difference between a real person or a computer. Alex still has this "metal factor" in its voice, which makes my ears hurt after 8 hours of listening. The next problem with Alex is, that he never makes a break after a sentence. Also, it's not possible to think about a sentence and then continue reading. It's also not possible to have him repeat a sentence, without tedious text selection and shortcut usage. Actually, the best tool I can imagine would have the option to read a sentence and move on to the next one after pressing a special key, OR repeating the previously one after pressing a special key. That would help so much! And if that's even with one of those bell lab / AT&T / whatever super-natural voices, even better! But it would be already a great relief if there was just a better tool to control Alex. To let him make breaks after sentences or let him speak big chunks of text sentence-by-sentence with fine-grained control over repetition and moving on. Is there anything?

    Read the article

  • Why does the Java VM process eat up more RAM then specified in -Xmx parameter?

    - by evilpenguin
    I have multiple servers running CentOS 5.4 and only one application running on Java VM. I've configured the Java VM with the following arguments: java -Xmx4500M -server -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:NewSize=1024m -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true The machines I'm running the VM on has 6 GB RAM and no other applications running. After a while, the java process starts to hit the swap space really hard, I get this info out of the top command: 7658 root 25 0 11.7g 3.9g 4796 S 39.4 67.3 543:54.17 java On the other hand, if I connect via JConsole, it reports the Java VM has 2.6 GB used, 4.6 GB commited and 4.6 Gb max. java -version returns: java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode) Why is the Java VM expanding so much past it's allocated heap size? And where does that memory go, if it's not reported in JConsole?

    Read the article

  • Swapping 3Ware Raid Card - Best Procedure

    - by Brian Lee Jackson
    We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

    Read the article

  • vnc connection from linux to windows ce

    - by JosiP
    Im having troubles while im trying to connect from linux to Windows CE, via VNC viewer. Here is what i can see on log: /usr/bin/vncviewer 10.1.1.57 VNC Viewer Free Edition 4.1.2 for X - built Apr 20 2011 12:04:25 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Tue Jul 2 12:15:04 2013 CConn: connected to host 10.1.1.57 port 5900 CConnection: Server supports RFB protocol version 3.5 CConnection: Using RFB protocol version 3.3 TXImage: Using default colormap and visual, TrueColor, depth 24. CConn: Using pixel format depth 6 (8bpp) rgb222 CConn: Using ZRLE encoding I cannot see anything - only black screen. Restarting device does not help. Device is connected directly to machine by crossed ethernet cable, and its IP is assigned by DHCP. Any clues, ideas, what can i do to get normal view ? best regards J.

    Read the article

  • Configuring NAT and static IP on Cisco 877W

    - by David M Williams
    Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

    Read the article

  • Visual SVN server Running but cannot access / browse repositories

    - by user1783560
    Operating System: Windows Web Server 2008 R2 Visual SVN Version: 2.5.7 Subversion: 1.7.7 Apache: 2.2.22 I freshly installed the Visual SVN latest version on the server and created one repository in it. In the server management window, it shows that the server is up and running but when I try to browse it in a web browser, it doesn't respond. I am not able to import my existing code into the repository: Error: Cannot connect to server open/browse the repository with either command localhost:81/svn OR http://www.myserver.com:81/svn OR http:// myIPAddress:81/svn Visual SVN log is clean. The last information in the server log is that "The server is listening to port 81.

    Read the article

  • Windows OEM vs retail difference

    - by tjameson
    My laptop has an OEM version of Vista Home Premium 32-bit. I need to reinstall Windows, and I've made sure that disk I have downloaded is the same as the one on my system (32-bit Home Premium). Is the retail version the same as the OEM? I only have a retail copy but I have an OEM license. Will I have any problems reactivating my copy of windows? Note, my HW hasn't changed. Note: I saw this post already, but I don't have an OEM disk: Installing XP with out manufacturers original XP restore disk, possiable with OEM disk?

    Read the article

  • Windows Setup could not configure Windows to run on this computer's hardware

    - by Hello71
    The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

    Read the article

  • How to remove IIS/ASP.NET Response Headers

    - by Redbeard 0x0A
    I have a couple IIS/6.0 servers that security is asking me to remove a couple of response headers that are sent to client browsers on requests. They are concerned about divulging platform information through response headers. I have removed all the HTTP-HEADERS out of the IIS configuration for the website (X-Powered-By or some such header). (I personally do know that this information can be easily found out, even if it is hidden, but it isn't my call.) Headers I want to remove: Server - Microsoft-IIS/6.0 X-AspNet-Version - 2.0.50727 I also know that ASP.NET MVC also emits its own header too, if you know how to remove it also, that would be helpful. X-AspNetMvc-Version - 1.0

    Read the article

  • Installing Sql Server 2005 SP2 - Getting error on analysis services component

    - by Greg_the_Ant
    At first many of the components didn't install and I followed this workaround (fixing user/SID mappings in registry.) After that everything installed successfully except for analysis services. I am getting the exact same error message as before on analysis services. (Are there other users installed by sql server I'm not aware of perhaps?) Do you guys have any ideas? All of my searches seem to just point to that workaround above that I already did. Error message from log: Product : Analysis Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\OLAP9_Hotfix_KB921896_sqlrun_as.msp.log Error Number : 29528 Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.

    Read the article

  • UPS - Two computers - How to get them to both shutdown when battery is low?

    - by hamlin11
    Short Version: How do I get 2 computers to shutdown when a UPS battery gets low? Long Version: I have an APC UPS, the RS 1500. It has a USB cord that goes into my main dev computer. My dev computer will shutdown when the battery gets low. However, in addition, I have now hooked up a database server to the same UPS. How can I have that database server also know that it needs to shut down when the battery gets low?

    Read the article

< Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >