Search Results

Search found 17749 results on 710 pages for 'connection pool'.

Page 584/710 | < Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >

  • Monitor connected with WiDi just shows a black screen

    - by Pops
    I have a Dell XPS 18 and want to use an external monitor with it. The monitor has VGA and DVI-D inputs. The XPS 18 has no video output ports, but it does support Intel WiDi. I have a Netgear P2TV2000 WiDi receiver, but it only has composite and HDMI outputs. I'm connecting the receiver to the monitor with an HDMI cable and an HDMI/DVI-D adapter. So, in short, the video path is: Computer → WiDi → WiDi receiver → HDMI cable → HDMI/DVI-D adapter → Monitor After setting all this up, I can't get anything to display on the monitor. At the moment I power the monitor on, I can see my desktop for a brief fraction of a second, and then everything goes black. All of the relevant drivers have been updated to the latest versions. When I use a different WiDi-enabled computer to connect to the same monitor, everything works fine. When I use the original computer and receiver to connect to a TV, everything works fine. It's only when I connect the original computer to the monitor I want to use that the connection fails. What could be going wrong here, and how can I get the video to work consistently?

    Read the article

  • Windows Server 2008 R2 SP1 Drivers Missing Would Not Install?

    - by bleepzter
    I am building my dev machine with WS2008R2SP1. I consider Windows Server as the best development environment for C# since I tend to focus on server-centric (integration) applications. The desktop flavor of Windows (7) doesn't play nicely with things like Commerce Server or BizTalk... so I to like stick to the environment I develop for. Previously I used to develop inside of VM's but I've found that it is super inefficient and tends to take a toll on the laptops. (I've gone through two of them in 6 months). Problem is that I multiple devices that do not want to be recognized by Windows: My machine is Dell Precision M4500: Intel Core i7-Q740, 1TB HDD, 8GB RAM, Dell re-branded Broadcom DW1501 802x11n Half-Mini Card, Dell re-branded Broadcom DW375 Bluetooh Module, Intel 82577LM Gigabit Network connection NVidia Quadro FX1800 Graphics The devices in question are the Dell rebranded broadcom network and bluetooth adapters: Broadcom USH: USB\VID_0A5C&PID_5800&REV_0101&MI_00 USB\VID_0A5C&PID_5800&MI_00 DW375 Bluetooth Module USB\VID_413C&PID_8187&REV_0517 USB\VID_413C&PID_8187 When I ran the broadcom installers I get "Operating System not supported" which I think is a big oversight on Broadcom's part. Why check for system version string? UGHGHGH Moreover if I try to manually force the driver in windows... I get an error: Driver Management concluded the process to install driver FileRepository\btwampsecfl.inf_amd64_neutral_d8fc2b85d035ed47\btwampsecfl.inf for Device Instance ID USB\VID_0A5C&PID_5800&MI_00\7&66DE6C9&0&0000 with the following status: 0xe0000217. '- or - Driver Management concluded the process to install driver FileRepository\btwampfl.inf_amd64_neutral_d4c4acf036c61299\btwampfl.inf for Device Instance ID USB\VID_413C&PID_8187\90004EEEF5A6 with the following status: 0xe0000217. I googled the 0xe0000217 error code and it says Bad service install section in the driver inf file... Any ideas on how to fix this? I also tried the post by BetaIQ on MSDN Forum, unfortunately the links to the driver package included in the post were dead :( PS. On a side note I also do mobile development for Android, iOS, and Windows Phone, and BB. Having the bluetooth is quite useful with mobile devices.

    Read the article

  • netconfig won't change DNS on opensuse 12.2

    - by Krystian
    I'm trying to update my dns servers after openvpn connection, but netconfig won't do that for me. Here's how I'm trying to do it [manually now]: /sbin/netconfig modify -v -i tap0 -s openvpn <<-EOF INTERFACE='tap0' DNSSERVERS='10.10.0.1' EOF And here's the verbose output: debug: lockfile created (/var/run/netconfig.pid) for PID 5530 debug: lockfile created debug: write new STATE file /var/run/netconfig//tap0/netconfig0 debug: Module order: dns-resolver dns-bind dns-dnsmasq nis ntp-runtime debug: dns-resolver module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_dns_settings: service 'NetworkManager' => rank '1' debug: get_dns_settings: DNS_SEARCHLIST_1='mydomain.com' debug: get_dns_settings: DNS_SERVERS_1='192.168.0.1' debug: exit get_dns_settings: /var/run/netconfig/NetworkManager.netconfig debug: write_resolv_conf: ' mydomain.com ' ' 192.168.0.1 ' debug: No changes for /etc/resolv.conf debug: dns-bind Module called debug: dns-dnsmasq Module called debug: nis Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: exit get_nis_settings: /var/run/netconfig/NetworkManager.netconfig debug: set_nisdomainname: eth0 24 debug: set_nisdomainname: => yes debug: set_nisdomainname: old[]=, new[24]= debug: format_yp_conf called with : debug: Using static fallback debug: format_static[0] called debug: No changes for /etc/yp.conf debug: nis domainname '' is up to date debug: ntp-runtime Module called debug: Static Fallback debug: Use NetworkManager policy merged settings debug: exec get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig debug: get_ntp_settings: NTP_SERVER_LIST='' debug: exit get_ntp_settings: /var/run/netconfig/NetworkManager.netconfig I've been trying to find something relevant on the web, but failed to do so. I have no other clue on how to progress with this issue. Any thoughts?

    Read the article

  • D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

    - by axk
    I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

    Read the article

  • remote telnet and email

    - by Mustafa Ismail Mustafa
    This issue has been occupying my work for the last few days and I will be understating when I say its driven me up the blasted walls. Essentially, I can ping and tracert the domain jnrcs.org and the subdomains mail.jnrcs.org and mail.jordanredcrescent.org. All three mentioned point to ip address 212.38.147.97. About 4 days ago, when we registered the domain "jnrcs.org" suddenly all external connection to the mail server from outside was lost. Not just mail, but other http based port-forwarded or natted services (such as camera surveillance and pbx services). I tried good old telnet (I'm a linux user) and I get the following output: telnet> o mail.jnrcs.org 25 Trying 212.38.147.97... telnet: Unable to connect to remote host: No route to host telnet> Tracert gives me: traceroute to mail.jnrcs.org (212.38.147.97), 30 hops max, 60 byte packets 1 192.168.1.2 (192.168.1.2) 0.869 ms 0.944 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 212.38.128.118 (212.38.128.118) 33.875 ms 39.187 ms 7 * * * 8 * * * 9 * * * 10 * * * 11 * * 212.38.147.97 (212.38.147.97) 67.621 ms I am stumped. Other friends from all around the world can telnet no problem. What could have possibly happened to make telnet/smtp/pop/imap/http access stop? Please bear in mind I'm primarily a developer but I [am under the delusion] that I can carry my weight in IT administration :) TIA

    Read the article

  • Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

    - by dash-tom-bang
    Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

    Read the article

  • Dynamically add Server 2008 NLB Nodes

    - by Nick Jacques
    Hi All, I have a small NLB cluster for Terminal Servers. One of the things we're looking at doing for this particular project (this is for a college class) is dynamically creating Terminal Servers. What we've done is create policies for a certain OU, that sets the proper TS Farm properties and installs the Terminal Server role and NLB feature. Now what we'd like to do is create a script to be run on our Domain Controller to add hosts to the preexisting NLB cluster. On our Server 2008 R2 Domain Controller, I was thinking of running the following PowerShell script I've kind of hacked together. Any thoughts on if this will work? Is there any way I can trigger this script to run on the DC once all the scripts to install roles are done on the various Terminal Servers? Thanks very much in advance!! Import-Module NetworkLoadBalancingClusters $TermServs = @() $Interface = "Local Area Connection" $ou = [ADSI]"LDAP://OU=Term Servs,DC=example,DC=com" foreach ($child in $ou.psbase.Children) { if ($child.ObjectCategory -like '*computer*') {$TermServs += $child.Name} } foreach ($TS in $TermServs) { Get-NlbCluster 172.16.0.254 | Add-NlbClusterNode -NewNodeName $TS -NewNodeInterface $Interface }

    Read the article

  • Why do I have untrusted certificates for Google, Yahoo, Mozilla and others?

    - by jackweirdy
    In the HTTPS/SSL section of chrome://chrome/settings, I see the following: What does this mean, and is there something wrong? I have a basic understanding of SSL/TLS - I'm not claiming to be completely familiar, but I'm fairly confident I know my way around it - but I don't understand why I have certificates installed on my machine specifically for these sites. From my understanding, I should have the certificates for Certificate Authorities, and any site I visit and use SSL/TLS should have a certificate signed by one of these trusted CAs for me to trust the site. My worry is that if someone has maliciously installed a certificate for these sites on my machine, they could perform a DNS spoofing attack (or a number of other attacks) to hijack my connection to my email account without me knowing, and as they've got the private counterpart to the certificate on my machine, decrypt the communication. NB: I'm also aware that CA certificates aren't just within Chromium and are used system wide as part of libssl - they're stored in /etc/ssl/certs. What I'd like to know is: Is this correct? - The big red boxes make me think no Is this malicious or benign? What can I do to resolve this problem? (If indeed it is a problem) Thanks :)

    Read the article

  • Cannot get SCVMM Admin Console to Connect to Hyper-V Server 2008 R2

    - by user63250
    I cannot get SCVMM Admin console to connect to Hyper-V Server 2008. I have changed all firewall settings on the server to allow for a connection, I have even tried turning the firewall off completely. I am getting this error message: Unable to connect to the Virtual Machine Manager server xx.xxx.xxx.xx. the Virtual Machine Manager service on that servier did not respond. Verify that Virtual Machine Manager has been installed on the server and that the Virtual Machine Manager service is running. Then try to connect again. If the problem persists, restart the Virtual Machine Manager Service. ID: 1602 I have tried restarting the VMMS service, and that did not work. I have posted a similar question to this before, and was told to make sure to intall the Hyper-V agent on the Hyper-V server. I was told that SCVMM can push the agent out to the server. However, if I cannot connect to the server, how can I use SCVMM to push out the agent? Thanks for any help.

    Read the article

  • laptop motherboard "shorts" when connected to adapter

    - by Bash
    Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

    Read the article

  • RTL8192SU Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Server taking too long to respond error

    - by DCJones
    This is my first post on serverFault and my first entry in to web server configuration. The hardware and software. CPU: GenuineIntel, Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz OS: Linux 2.6.18-128.el5 Memory: 2Gb Background. I am running a small database (MySQL), around 1000 records with each record containing 44 fields. At the start of each day “00:01” the tables are cleared and populated with fresh data. The are 10 remote PCs all running Winodws XP and Firefox internet browser. All remote PC’s are connected to the internet using a min 4Gb broadband connection. Each remote PC runs a URL which displays a dynamic page of data which is refreshed every 20 seconds. This is a continual process 24 hours a day. I problem I am having is on odd occasions throughout the day the PC browser error with “Server taking too long to respond error”. What I am trying to find our is if I have the correct setting in the httpd.conf file on the server. Any help or advice anyone can provide would be very helpful. Best regards Dereck Server config file: httpd.conf ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 5 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 254 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 150 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule>

    Read the article

  • Can't connect two PCs to a Network Switch at the same time (Windows 7)

    - by puk
    I have two computers connected to a network switch and every once in a while one of the computers will lose its internet connection. It's almost always the same computer every time. However, if I play around with the control panel, I can switch it, so that now the other computer is not connected. Restarting either of the computers does not help either. In Windows, the worlds-greatest-trouble-shooter tells me that a network cable is unplugged and that I should try plugging it in...Disabling and re-enabling my NIC does not fix this problem, neither does swapping cables around. When rebooting, the BIOS complains about how the Ethernet Cable is not plugged in. If it's in any way important, My set up at the office is like so: Modem - Routher - Network Switch 1 - Network Switch 2. I have tried turning off the energy saving option for my NIC, and I tried manually setting the link-speed to 100Mbps Full Duplex without any luck. Also, I have a Realtek PCIe GBE Family controller on both computers Does anyone have any idea why this is happening every 5-10 days? EDIT: I have also tried using a completely different Network Switch and the problem still persists as before.

    Read the article

  • Bind9 zone files

    - by user42780
    Well for the better part of the last two hours I've tried to figure out what is actually wrong, but I can't seem to find anything obvious to me. What I'm trying to do is setup my DNS for say(per example) domain.com. This should include two NS records, namely ns1.domain.com and ns2.domain.com. With that there should be a mail record, as well as a CNAME record for www. I've been trough roughly 20 how to's in the last two hours, rewrote everything from scratch four times and I still can't seem to find whats wrong. My only suspicion to this might be two things; the error I get from the bind9 daemon when I stop the service, and the named.conf file. The error I get from the bind9 daemon when stopping the service is: * Stopping domain name service... bind9 rndc: connection to remote host closed This may indicate that * the remote server is using an older version of the command protocol, * this host is not authorized to connect, * the clocks are not syncronized, or * the key is invalid. I honestly doesn't know what this means, apart from the key defined in /etc/bind/rndc.key that's not in the named.conf file(yes, I did try to add it to no avail). Here's all the zone files, and configuration files; http://208.77.101.5/bind9/ If anyone could help, it would be greatly appreciated.

    Read the article

  • What can lead to a zone memory exhaustion and how Nginx reacts to it?

    - by Miles Hughes
    What is a possible scenario for exhausting the memory designated to a connection zone with limit_conn_zone directive and what are the implication in this case? Suppose I have this in my configuration: http { limit_conn_zone $binary_remote_addr zone=connzone:1m; ... server { limit_conn connzone 5; which, according to the documentation, allocates 16000 states for connzone on a 64-bit server. It also says that If the storage for a zone is exhausted, the server will return error 503 (Service Temporarily Unavailable) to all further requests. Well, Ok. But what does it mean on practice? When does this happen? Who receives those 503s? Does it mean that if the number of IPs somehow associated with connzone hits 16000 everyone gets a 503 and it's all over? How does Nginx decide? The documentation is weirdly vague on this. So, considering the example config, who would actually get a 503 and under which circumstances and how would things go from there? Same with request zones?

    Read the article

  • How much network latency is "typical" for east - west coast USA?

    - by Jeff Atwood
    At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

    Read the article

  • How to increase wifi speed for laptops

    - by sagar
    Now, Let me explain the situation. I am having a query regarding Wi-Fi network. I am having PC & laptop. I requested my Wi-Fi providers that I want connection in my PC. So that - Wi-Fi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my does not have a built in Wi-Fi adapter. Now - almost laptops have built in Wi-Fi. Now - On terrace there is Wi-Fi with superb speed. But on my flat - Wi-fi comes with low speed. So, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

    Read the article

  • Acer Aspire One getting extremely hot

    - by ascom
    I have an Acer Aspire One D250-1197. I really better type fast before it overheats again... For some reason, I'm having a problem with heat on my netbook only when I run Joli OS (Ubuntu 9.10 LTS?). When I leave it idle, with nothing running (other than the regular Joli OS desktop and a couple of doing-nothing terminals), heat slowly builds up to the point where the netbook is burning hot to the touch. I have never had this problem when running Windows 7 Starter (even though it gives me plenty of other headaches). It seems that the fan is spinning, but not fast enough to keep up with the heat buildup. Is there something wrong with the fan drivers? The computer doesn't seem to recognize that it is overheating. What can I do to solve this problem (other than shut it off or use Windows)? I'm currently on the wrong side of Earth (I mean, on vacation), so I just need a temporary fix, such as a driver I can install. Also, I have to use Linux, because I have to share out the wired connection in hotels wirelessly to the iPhones. EDIT: I'm switching from Joli OS to a more "proper" and up to date distribution (Xubuntu 13.04). I'll see if it still has the heat problem and try @nod's cpufreq idea.

    Read the article

  • snort analysis of wireshark capture

    - by Ben Voigt
    I'm trying to identify trouble users on our network. ntop identifies high traffic and high connection users, but malware doesn't always need high bandwidth to really mess things up. So I am trying to do offline analysis with snort (don't want to burden the router with inline analysis of 20 Mbps traffic). Apparently snort provides a -r option for this purpose, but I can't get the analysis to run. The analysis system is gentoo, amd64, in case that makes any difference. I've already used oinkmaster to download the latest IDS signatures. But when I try to run snort, I keep getting the following error: % snort -V ,,_ -*> Snort! <*- o" )~ Version 2.9.0.3 IPv6 GRE (Build 98) x86_64-linux '''' By Martin Roesch & The Snort Team: http://www.snort.org/snort/snort-team Copyright (C) 1998-2010 Sourcefire, Inc., et al. Using libpcap version 1.1.1 Using PCRE version: 8.11 2010-12-10 Using ZLIB version: 1.2.5 %> snort -v -r jan21-for-snort.cap -c /etc/snort/snort.conf -l ~/snortlog/ (snip) 273 out of 1024 flowbits in use. [ Port Based Pattern Matching Memory ] +- [ Aho-Corasick Summary ] ------------------------------------- | Storage Format : Full-Q | Finite Automaton : DFA | Alphabet Size : 256 Chars | Sizeof State : Variable (1,2,4 bytes) | Instances : 314 | 1 byte states : 304 | 2 byte states : 10 | 4 byte states : 0 | Characters : 69371 | States : 58631 | Transitions : 3471623 | State Density : 23.1% | Patterns : 3020 | Match States : 2934 | Memory (MB) : 29.66 | Patterns : 0.36 | Match Lists : 0.77 | DFA | 1 byte states : 1.37 | 2 byte states : 26.59 | 4 byte states : 0.00 +---------------------------------------------------------------- [ Number of patterns truncated to 20 bytes: 563 ] ERROR: Can't find pcap DAQ! Fatal Error, Quitting.. net-libs/daq is installed, but I don't even want to capture traffic, I just want to process the capture file. What configuration options should I be setting/unsetting in order to do offline analysis instead of real-time capture?

    Read the article

  • mysqld causes high CPU load

    - by Radu
    My mysqld goes to use 99.9% of CPU for variable time (between 2 - 20 minutes), and then goes back to normal 0.1% - 5%. Checked processlist: all is normal, 1 to 20 inserts or updates that last 2 to 5 sec, and about 20 process that are in Sleep Mode (maybe because the scripts don't close the mysql connection, but are they are closed in about 5 - 10 secs, I didn't make the scripts :P but the server was running fine the last 2 years, since is was made): | 15375 | root | localhost | stoc | Query | 0 | NULL | show processlist | | 79480 | pppoe | localhost | pppoe | Sleep | 4 | NULL | NULL | | 79481 | pppoe | localhost | pppoe | Sleep | 4 | NULL | NULL | | 79482 | pppoe | localhost | pppoe | Sleep | 4 | NULL | NULL | | 79483 | pppoe | localhost | pppoe | Query | 0 | init | UPDATE acc SET InputOctets="0", OutputOctets="0", InputPackets="unknown", OutputPackets="User | | 79484 | pppoe | localhost | pppoe | Sleep | 5 | NULL | NULL | | 79485 | pppoe | localhost | pppoe | Sleep | 5 | NULL | NULL | | 79486 | pppoe | localhost | pppoe | Sleep | 5 | NULL | NULL Checked raid, seemns OK: [root@db2]# cat /proc/mdstat Personalities : [raid5] [raid4] [raid1] md0 : active raid1 sdd1[3] sdc1[2] sdb1[0] sda1[1] 136448 blocks [4/4] [UUUU] md1 : active raid5 sdd2[3] sdc2[2] sdb2[0] sda2[1] 12023808 blocks level 5, 256k chunk, algorithm 2 [4/4] [UUUU] md3 : active raid5 sda4[1] sdd4[3] sdc4[2] sdb4[0] 203647488 blocks level 5, 256k chunk, algorithm 2 [4/4] [UUUU] md2 : active raid5 sda3[1] sdd3[3] sdc3[2] sdb3[0] 24024576 blocks level 5, 256k chunk, algorithm 2 [4/4] [UUUU] unused devices: <none> [root@db2]# top sees my mysqld cpu load, but nothing else seems to be wrong: [root@db2]# top top - 17:56:05 up 7 days, 3:55, 3 users, load average: 32.93, 24.72, 22.70 Tasks: 75 total, 4 running, 71 sleeping, 0 stopped, 0 zombie Cpu(s): 63.4% us, 36.6% sy, 0.0% ni, 0.0% id, 0.0% wa, 0.0% hi, 0.0% si, 0.0% st Mem: 1988824k total, 1304776k used, 684048k free, 99588k buffers Swap: 12023800k total, 0k used, 12023800k free, 951028k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 5754 mysql 19 0 236m 57m 5108 R 99.9 2.9 21:58.76 mysqld 1 root 16 0 7216 700 580 S 0.0 0.0 0:00.39 init 2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 Repaired all mysql databases, reindexed raid ... I'm running out of ideeas ... Anyone has an ideea what can go wrong with this server ? Thank you

    Read the article

  • Are there any Microsoft Exchange Clients for iOS and Android that store their local data in an encrypted manner?

    - by Zac B
    I don't feel like this is a product recommendation question, more of a "does this tech even exist and is it feasible" question, but if I'm wrong, feel free to give this question the boot. Context: Our company has a bunch of traveling employees who access the company's Exchange server via thier iDevices or android phones, but because of the data protection laws in the state where our company is based (and the nature of the data our company works with), a recent security audit found that all mobile devices (laptops, phones, etc) operated by our company need to have all company correspondence and related data encrypted all the time. For laptops, that was easy: BitLocker or TrueCrypt, problem solved. For phones and tablets, however, I'm stumped. Sure, you can put lock screens/passwords on the phones, but the data is still accessible via external extraction, as law enforcement authorities already know. Question: Are there any clients for Microsoft Exchange that run on iOS or Android which store local data encrypted? The people using our mobile devices do a lot of their work while offline, so just giving them OWA access with SSL connection security isn't enough. Are there apps/technologies that present an additional login credential prompt to decrypt locally stored data in the app's storage area on the phone? My gut reaction when I started looking into this was "that doesn't sound like something Apple would allow into the App Store", but I've been wrong before...

    Read the article

  • Set default MySQL connect charset for PHP (in RHEL)?

    - by Martijn Heemels
    We're running a hundred or so legacy PHP websites on an older server which runs Gentoo Linux. When these sites were built latin1 was still the common charset, both in PHP and MySQL. To make sure those older sites used latin1 by default, while still allowing newer sites to use utf8 (our current standard), we set the default connect charset in php.ini: mysql.connect_charset = latin1 mysqli.connect_charset = latin1 pdo_mysql.connect_charset = latin1 Specific more modern sites could override this in their bootstrapping code with: <?php mysql_set_charset("utf8", $dsn ); ...and all was well. Now the server is overloaded and we're no longer with that hoster, so we're moving all these sites to a faster server at our standard hoster, which uses RHEL 5 as their OS of choice. In setting up this new server I discover to my surprise that the *.connect_charset directives are a Gentoo specific patch to PHP, and RHEL's version of PHP doesn't recognize them! Now how do I set PHP to connect to MySQL with the latin1 charset? I thought about setting a default in my.cnf but would prefer not to force every app and client to default to latin1. Our policy is to use utf8, and we'd like to restrict the exception to PHP only. Also, converting every legacy site to properly use utf8 is not doable since many are of the touch 'm and you break 'm kind. We simply don't have the time to go fix them all. How would I set a default mysql/mysqli/pdo_mysql connection charset to latin1 for PHP, while still allowing individual scripts to override this to utf8 with mysql_set_charset()?

    Read the article

  • Wireless disconnect randomly with wpa_supplicant reason=2

    - by renenglish
    I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

    Read the article

  • Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

    - by Maxim Z.
    I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

    Read the article

  • Convert a Linksys WAG54GP2 ADSL router into Access point only to extend my Wifi range

    - by Preet Sangha
    I have a wireless lan running on my ASDL2 connection. The router (Seimens Gigaset sx763) is provided by the ISP and is generally good. However I have couple of dead spots at the far end of the house and since I have my old router sitting in the drawer I thought that I'd try to convert it into simple WAP. However downloading the manual from linksys it seems to be that the manual is from an earlier firmware, but the very first option on the very first page seems promising: Wan Mode: Router or ADSL However after this I'm a bit lost. I know that the wireless card on this box will need a mac address and it must get its address from the master router (I thought static might be best). However the again the manual is out of date I have the option of DHCP: ON or OFF or RELAY I've not even got to the more complex options yet. Question is can this device even work this way (seems like it but I cannot find any docs on it), and if so how? Edit: Having now fiddled around I'm of the opinion that this cannot be done.

    Read the article

< Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >