Search Results

Search found 20785 results on 832 pages for 'idea'.

Page 584/832 | < Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• How to use different scaling for every monitor?

  - by Mikael Koskinen

  One of the new features in Windows 8.1 is the new "Desktop display scaling", which allows user to configure scaling per monitor. I've been trying to get this working in preview but with no success. If I configure the scaling, it always affects all of my monitors. I have two monitors, the main one with a higher resolution and the secondary with "normal" resolution. The secondary monitor is used in portrait mode. I would like to configure the main monitor's scaling as the text is currently too small. Here's how things look at the configuration screen by default: Now if I adjust the scaling, click apply and do relogin, everything is bigger. On both of my monitors. I haven't clicked the "Let me choose one scaling level for all my displays", but still the slider seems to affect both of them. If I check the "Let me choose one scaling level", the UI changes to look similar to what we have in Windows 8: Still the problem persists. The scaling is applied to both of my monitors. So, it doesn't matter if I check the box or not, the scaling is always applied to all the displays. Any idea how I could get this to work in preview? I've read some comments which seem to indicate that this should work in preview, though Paul Thurrott mentioned at his Winsupersite article that he either didn't get this to work.

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• Virtual Wifi Issue Windows 7

  - by Matt

  Lately I've been trying to use my laptop as a wireless router in my room. I have it connected to my school's network through ethernet, and I want to set up wireless so that I can use Wifi on my Android phone and iPod Touch. In the past, I used Connectify, but I started having an issue where my phone would find the network, connect, attempt to get the IP, and then suddenly the network would disappear. Then it'd pop up again, and the same process would happen over and over. I decided that I'd totally uninstall Connectify, but after that, neither Virtual Router Manager nor the command prompt could create a viable network either. My phone and even my iPod now encounter the same problem. Neither can successfully connect. So evidently there is something wrong with the laptop's virtual wifi feature, and I have no idea what that could be. I've tried enabling certain services that virtual wifi supposedly relies on, but some of them don't start, namely Remote Access Connection Manager. But I also have read that these enable on their own and that if they are normally not enabled it's fine. Furthermore, I even uninstalled and reinstalled the drivers for my wireless card. Any ideas as to why my virtual wifi won't function? Anything? I really would love to get this working...

  Read the article

• Strange windows boot problem - My computer won't boot from hard disk

  - by user29779

  Hello, Until yesterday, I had windows XP installed on my computer. After installing the OS, and setting the BIOS to boot from the hard-disk first, I discovered a strange problem - the OS wasn't booted and the only way I could get it to load was to insert a windows installation disk, enter repair mode, do "fixboot" and restart. The problem only occured when the computer was booted after shut-down. If I only restarted it, everything worked fine. Yesterday, I upgraded my XP to win7 and the problem persists. I tried the same "trick" I did with XP to get it to load, by entering repair and doing "bootrec /fixmbr" and "bootrec /fixboot" but that didn't work (and when I run "scanos" it didn't find any windows installations). Eventually, I got it to load by changing the settings in the BIOS to boot from CD first and HD second, removing the installation disk from the drive, letting it fail to boot from CD and then re-insert the disk. Anyone has any idea what may be the cause or how can I investigate this issue? Thanks! Marina

  Read the article

• copy large LVM volume(14TB) from one server to another

  - by bruce

  recently,I have to copy a very large LVM volume()rom server A to server B. Below is the filesystem of server A and server B - server A [root@AVDVD-Filer ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_avdvdfiler-lv_root 16T 14T 1.5T 91% / tmpfs 3.0G 0 3.0G 0% /dev/shm /dev/cciss/c0d0p1 194M 23M 162M 13% /boot /dev/mapper/vg_avdvdfiler-test 2.3T 201M 2.1T 1% /test /dev/sr0 3.3G 3.3G 0 100% /mnt server B [root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-LogVol00 20G 2.5G 16G 14% / tmpfs 3.0G 0 3.0G 0% /dev/shm /dev/cciss/c0d0p1 194M 23M 162M 13% /boot /dev/mapper/VolGroup00-LogVol00 16T 133M 15T 1% /xiangao/lv1 /dev/mapper/VolGroup00-LogVol01 4.7T 190M 4.5T 1% /xiangao/lv2 I want to copy LVM volume /dev/mapper/vg_avdvdfiler-lv_root on server A to LVM volume /dev/mapper/VolGroup00-LogVol00 on server B . The server A and server B is in the same IP segment. IN the LVM volume on server A , there is all average 500M avi wmv mp4 etc. I tried mount /dev/mapper/vg_avdvdfiler-lv_root on server A to server B through NFS , then use cp command copy. It is clear I faild . Because the LVM volume is too big , I do not have good idea . I hope a good solution here. I'm a chinese, my english is very pool. sorry thanks everyone!

  Read the article

• How to get multipath working for Ubuntu Server 12.04

  - by mlampi

  I'm working on a project which aims to make use of Ubuntu servers running on enterprise class hardware. In our case that means IBM HS23E blade servers, QLogic 4GB fibre channel extension cards and quite old IBM DS4500 disk array with two controllers. At the moment we have fibre channel as only boot option and Ubuntu Server 12.04 installed just fine and is able to boot without multipath. I'm not a linux professional myself but in our team we have people who will understand the technical stuff. Don't let my post confuse :) The current situation is that we have only one fibre channel connection to a single disk array controller. Real life case would be of course quite different. At minimum we should have two fibre channel ports connected to two different switches and two different controllers. However, we have no idea how to set up multipath tool. Is the DM-MPIO the right software? At minimum we should be able to boot when multiple connections are available and achieve fault tolerance when any of them should be down. Since the disk array is not the latest hardware, I managed to find RDAC driver sources only for 2.6.x kernel. And we have 3.2.x. Another issue is to build a multipath.conf. The said driver sources are from IBM support and the QLogic drivers provided to Ubuntu installer are from Ubuntu site. It seems that RHEL and SLES would have near out of the box support but that is not an option for our project. Actual questions: - What is the recommended software tool for multipath for Ubuntu Server 12.04? - Is there available pre-made configurations or templates? Does it require disk array / controller specific settings or do a more generic config work? - Do you have expriences on similar setup and like to share the knowledge? I'll provide you with any additional information you might require. Thanks in advance.

  Read the article

• Router recommendation to virtualize 800 IPs

  - by delerious010

  I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

  Read the article

• Issue with SSL using HAProxy and Nginx

  - by Ben Chiappetta

  I'm building a highly available site using a multiple HAProxy load balancers, Nginx web serves, and MySQL servers. The site needs to be able to survive load balancer or web servers nodes going offline without any interruption of service to visitors. Currently, I have two boxes running HAProxy sharing a virtual IP using keepalived, which forward to two web servers running Nginx, which then tie into two MySQL boxes using MySQL replication and sharing a virtual IP using heartbeat. Everything is working correctly except for SSL traffic over HAProxy. I'm running version 1.5 dev12 with openssl support compiled in. When I try to navigate to the virtual IP for haproxy over https, I get the message: The plain HTTP request was sent to HTTPS port. Here's my haproxy.cfg so far, which was mainly assembled from other posts: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice # log 127.0.0.1 local0 user haproxy group haproxy daemon maxconn 20000 defaults log global option dontlognull balance leastconn clitimeout 60000 srvtimeout 60000 contimeout 5000 retries 3 option redispatch listen front bind :80 bind :443 ssl crt /etc/pki/tls/certs/cert.pem mode http option http-server-close option forwardfor reqadd X-Forwarded-Proto:\ https if { is_ssl } reqadd X-Proto:\ SSL if { is_ssl } server web01 192.168.25.34 check inter 1s server web02 192.168.25.32 check inter 1s stats enable stats uri /stats stats realm HAProxy\ Statistics stats auth admin:********* Any idea why SSL traffic isn't being passed correctly? Also, any other changes you would recommend? I still need to configure logging, so don't worry about that section. Thanks in advance your help.

  Read the article

• SQL 2K5 - Multiple databases vs. Multiple files

  - by Bob Palmer

  Hey all, quick question. Our current legacy system was built using multiple distinct databases (about ten of them). These are all part of the same discreet system, and a large number of SPs and functionalty span multiple databases. There are also key relationships that span (for example, a header table may be in database A with history, etc. in database B). When deploying multiple copies of our app to the same server therefore, we have to use multiple instances (because the database names are coded into so many sprocs). We're evaluating the idea of taking these ten databases (about 30gb total with individual sizes ranging from 100mb to 10gb) and merging them into a single database. Currently, we have our databases spread accross multiple spindles for better IO. The question I have is whether or not there is any performance loss or benefit of having 10 different databases vs. 10 different database files? i.e. rather than having three databases (A, B, and C) Disk D: A.mdf (1gb) Disk E: B.mdf (4gb) Disk F: C.mdf (10gb) Disk G: A_Log.ldf, B_Log.ldf, C_Log.ldf have one database (X) Disk D: X1.mdf (5gb) Disk E: X2.mdf (5gb) Disk F: X3.mdf (5gb) Disk G: X1_log.ldf,X2_log.ldf,X3_log.ldf Thanks! -Bob

  Read the article

• Rsync: Only preserve meta (time, group, etc) on files and sub-directories, not root directory

  - by Svish

  I am copying some files (all except hidden ones) using rsync from one place to another using this command: rsync -Cav --delete --exclude=.* /Some/Directory/ other-host:/Other/Directory It works nice except that I get the following errors: rsync: chgrp "/Other/Directory/." failed: Operation not permitted (1) rsync: failed to set times on "/Other/Directory/.": Permission denied (13) That is understandable because I do in fact not have those permissions, and I also do not want to change the group of that directory. I only want to do this for all the files and directories that are in that directory. Is there any way to solve this? Tried to --exclude=. and --exclude=./, but those didn't work. Any ideas? I have no idea how to fix this... More details: This is on Mac OS X, and the directories I am syncing is from a local mounted volume to the /Users/Shared/ directory on the other host. That directory has user root and group wheel. The files inside it has user admin and group staff and so does the local source directory.

  Read the article

• It takes a long time until Windows XP recognize I connected USB drive

  - by Pavol G

  I have a problem with my new USB disk. When I connect it to my laptop with Windows XP SP2 it takes about 4-5min until Windows recognizes it and shows it as a new disk. I can also see (disk's LED is blinking) that something is scanning the disk when I connect it; when this is done Windows immediately recognize it. Also when I'm copying data to this disk the speed is about 3.5MB/sec. It's connected using USB2.0. I tried to check for spyware (using Spybot), also tried running Windows in safe mode. But still have the same problems. Do you have any idea what could help to solve this problem? On Windows Vista (another laptop) everything is ok, disk loads in about 15sec and speed is about 20-30MB/sec. Edit: I tried to update to SP3 - no change Edit2: When this "strange" scanning occurs I can see that DPCs process is taking about 50% of CPU. When the scan ends (after 5min) this process take 0% again. Edit3: About the scan time, currently it's taking about 5min, but this time is growing as I'm adding more data to the disk, currently its about 40GB and I don't want to see how long it will take with 1000GB. Thanks a lot for every advice!

  Read the article

• ESXi - change to thin - virtual disk filesize is the same

  - by sven

  running ESXi 5.5 here with a datastore on a single SSD. Now, I thought about changing to thin disks from thick and found that I could use a tool on the ESXi host to do that. However, the file size of the new created virtual disk is not changing. I run: vmkfstools -i loader.vmdk -d 'thin' thinloader.vmdk Destination disk format: VMFS thin-provisioned Cloning disk 'loader.vmdk'... Clone: 100% done. After that I compared the virtual disksizes: ls -la *.vmdk -rw------- 1 root root 32212254720 Jun 10 08:25 loader-flat.vmdk -rw------- 1 root root 467 May 21 17:04 loader.vmdk -rw------- 1 root root 32212254720 Jun 10 08:27 thinloader-flat.vmdk -rw------- 1 root root 520 Jun 10 08:33 thinloader.vmdk Stats on the original file: stat loader.vmdk File: loader.vmdk Size: 467 Blocks: 0 IO Block: 131072 regular file Device: 8bf64d175e27544ch/10085333178302026828d Inode: 419443780 Links: 1 Access: (0600/-rw-------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-01-25 10:17:34.000000000 Modify: 2014-05-21 17:04:06.000000000 Change: 2014-05-21 17:04:06.000000000 and on the thin file: stat thinloader.vmdk File: thinloader.vmdk Size: 520 Blocks: 0 IO Block: 131072 regular file Device: 8bf64d175e27544ch/10085333178302026828d Inode: 432026692 Links: 1 Access: (0600/-rw-------) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2014-06-10 08:27:45.000000000 Modify: 2014-06-10 08:33:30.000000000 Change: 2014-06-10 08:33:30.000000000 Anyone an idea why the disk is not providing any more space (tried with multiple VM's already - all the same)? Also, I have noticed that the newly created file "autoappend" "-flat" to the disk ... Thanks Sven Update - diff of the vmdk config* --- loader.vmdk +++ thinloader.vmdk @@ -7,15 +7,17 @@ createType="vmfs" -RW 62914560 VMFS "loader-flat.vmdk" +RW 62914560 VMFS "thinloader-flat.vmdk" ddb.adapterType = "lsilogic" +ddb.deletable = "true" ddb.geometry.cylinders = "3916" ddb.geometry.heads = "255" ddb.geometry.sectors = "63" ddb.longContentID = "6d95855805dfa0079327dfee29b48dca" -ddb.uuid = "60 00 C2 98 d5 7d 17 bf-ac 54 70 b1 2d 39 43 d5" +ddb.thinProvisioned = "1" +ddb.uuid = "60 00 C2 93 c4 13 6c cf-bb 7b 34 c9 2c b4 dc 1e" ddb.virtualHWVersion = "8"

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  Hello, I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• Backup solution, or, how Duplicati duped me

  - by blarghmaster

  TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

  Read the article

• Asterisk terminating outbound call when picked up, sends 'BYE' message

  - by vo

  I'm running Asterisk 1.6.1.10 / FreePBX 2.5.2.2 and I've got an outbound trunk setup. Everything use to work fine until recently (perhaps due to upgrade to FC12 or other things I'm not sure). Anyway the setup does not appear to have issues registering and setting up the call, RTP packets go both ways and you can hear the ringing from the other side. However it appears that when the call is picked up or thereabouts, the incoming RTP packets cease. Upon closer inspection with Wireshark, there are these particular packets that seem to be the cause: trunk->asterisk SIP/SD Status: 200 OK, with session description asterisk->trunk SIP Request: ACK sip:<phone>@trunk:6889 asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 [..about a dozzen RTP packets in/outbound..] trunk->asterisk SIP Status: 200 OK, CSeq: 104 Bye [..outbound RTP continues, phone is silent..] Then the inbound RTP packets cease, however the asterisk logs dont show any activity at this point. The last entry reads 'SIP/ is answered SIP/'. Then when you hangup the extension, you get asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 trunk->asterisk SIP Status: 481 Call Leg/Transaction does not exist My trunk peer settings in FreePBX are: username=<user> fromuser=<user> canreinvite=no type=friend secret=<pass> qualify=no [qualify yes produces 401/forbidden messages] nat=yes insecure=very host=<sip trunk gateway> fromdomain=<sip trunk gateway> disallow=all context=from-pstn allow=ulaw dtmfmode=inband Under sip_general_custom.conf i have stunaddr=stun.xten.com externrefresh=120 localnet=192.168.1.1/255.255.255.0 nat=yes Whats causing Asterisk to prematurely end the call and still think the call is in progress? I have no idea where to look next.

  Read the article

• Custom MS-DOS / FreeDOS

  - by user1801387

  Goal : Build a custom DOS to boot into. To automate tasks like formating a drive, or doing recovery. I've been using Grub4DOS to boot into these images. So far I've looking into taking a windows repair disk ISO and extracting. I can't seem to find the autoexec.bat in the disk. I really don't know where to look for the startup configuration file to change or how to add an autoexec.bat. I've tried MS-DOS 6.22. But it lacks the diskpart tool I require. I've tried extracting the images and adding it. Then I got a boot failed. I assume that after i added it. All the files when to lower case names and I assume that the OS is case sensitive. Then I've looking into using FreeDOS. But I don't know how it works at all. Partially because I can't seem to grasp the help/wiki's information. I looked into getting a bearbones release with just the kernel and I think it's the config.sys file. But I don't have any idea on how the packaging system works to incorporate diskpart into it. So really I'm in general looking for a small bootable DOS to where I can incorporate diskpart and setup an autoexec.bat for the actual function to carry out and to boot into. Thanks :) This is just for personal use also.

  Read the article

• Apache: How to redirect OPTIONS request with .htaccess?

  - by Milan Babuškov

  I have Apache 2.2.4 server with a lot of messages like this in the access_log: ::1 - - [15/May/2010:19:55:01 +0200] "OPTIONS * HTTP/1.0" 400 543 ::1 - - [15/May/2010:20:22:17 +0200] "OPTIONS * HTTP/1.0" 400 543 ::1 - - [15/May/2010:20:24:58 +0200] "OPTIONS * HTTP/1.0" 400 543 ::1 - - [15/May/2010:20:25:55 +0200] "OPTIONS * HTTP/1.0" 400 543 ::1 - - [15/May/2010:20:27:14 +0200] "OPTIONS * HTTP/1.0" 400 543 These are the "internal dummy connections" as explained on this page: http://wiki.apache.org/httpd/InternalDummyConnection The page also hits my main problem: "In 2.2.6 and earlier, in certain configurations, these requests may hit a heavy-weight dynamic web page and cause unnecessary load on the server. You can avoid this by using mod_rewrite to respond with a redirect when accessed with that specific User-Agent or IP address." Well, obviously I cannot use UserAgent because I minimized the server signature, but I could use IP address. However, I don't have a clue what should the RewriteCond and RewriteRule look for IPv6 address ::1. The website where this runs is using CodeIgniter, so there is already the following .htaccess in place, I just need to add to it: RewriteEngine on RewriteCond %{REQUEST_URI} ^/system.* RewriteRule ^(.*)$ /index.php?/$1 [G] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /index.php?/$1 [L] Any idea how to write this .htaccess rule?

  Read the article

• Will Intel be releasing anymore 6-core processors soon?

  - by jasondavis

  I am about to start buying parts every week for as long as it takes me to build the best PC I can build. I am looking at the Intel i7-920 processor right now because it is about 250$ and it is a quad-core processor based on the x58 chipset I believe. From what I have read so far, intel is coming out with some 6-core processors soon that will also use the x58 chipset and will allow me to use the same motherboard and memory/ram to upgrade to a 6-core. This sounds really good to me right now. I just read that the new 6-core processor. The Core i7-980X (extreme edition) was just released which is the first 6-core processor but it is supposed to be around $1,000 so I will probably just get the i7-920 for now and then upgrade to the 6-core version when the price goes down. The motherboard I am looking at getting the GIGABYTE GA-X58A-UD5 which is around $280 at newegg.com So that is my basic plan SO far. I have not purchased any parts yet. I am just wanting to ask if this sounds like a good idea or if I should wait longer if I am wanting to eventually have a 6-core processor. Does anyone know if Intel is planning on releasing any other 6-core processor in addition to the Core i7-980X in the near future? I just want to make sure I am buying the best setup for my money if I am going all out on it, thanks for any tips/advice.

  Read the article

• Formatting an external HDD stuck at 70%

  - by mahmood

  My external HDD which is a 250GB WD (powered by USB) seems to have problem! Whenever i try to copy some files, it stuck while copying. I decided to format it. So I used windows tool and performed the format (not quickly) however at nearly 70% it stuck. Then I decided to perform a low level format with lowlevel. Again it stuck at 70%. I endup that the HDD has bad sector. So is there any tool that mark the bad sectors and bypass them? It is not very reasonable to through 250GB because of some bad sectors! P.S: I saw a similar topic but there were no conclusion there either. The smart data is Attribute, raw value, value, threshold, status Read Error Rate, 50, 200, 51, OK Spin-Up Time, 3275, 154, 21, OK Start/Stop Count, 2729, 98, 0, OK Reallocated Sectors Count,0, 200, 140, OK Seek Error Rate, 0, 100, 51, OK Power-On Hours (POH), 1057, 99, 0, OK Spin Retry Count, 0, 100, 51, OK Recalibration Retries ,0, 100, 51 , OK Power Cycle Count, 1385, 99, 0, OK Power-off Retract Count, 425, 200, 0, OK Load /Unload Cycle Count,12974, 196, 0, OK Temperature, 43, 43, 0, OK Reallocation Event Count,0, 200, 0, OK Current Pending Sector Count,23,200, 0, Degradation Uncorrectable Sector Count, 0, 100, 0, OK UltraDMA CRC Error Count,6, 200, 0, OK Write Error Rate/Multi-Zone Error Rate,0,100,51, OK It seems that the most important thing is this line Current Pending Sector Count,23,200, 0, Degradation Any idea on that?

  Read the article

• TFS 2012: Backup Plan Fails with empty log file

  - by Vitor

  I have a Team Foundation Server 2012 installation with Power Tools, and I defined a backup plan using the wizard found in the "Database Backup Tools" in the Team Foundation Server Administration Console. I set the backup plan to do a full database backup on Sunday mornings, to another server in the network. I followed the wizard with no problems and the Backup Plan was set successfully. However when the backup runs it returns Error as result and when I go to the log file I only get the header and no further info: [Info @01:00:01.078] ==================================================================== [Info @01:00:01.078] Team Foundation Server Administration Log [Info @01:00:01.078] Version : 11.0.50727.1 [Info @01:00:01.078] DateTime : 11/25/2012 02:00:01 [Info @01:00:01.078] Type : Full Backup Activity [Info @01:00:01.078] User : <backup user> [Info @01:00:01.078] Machine : <TFS Server> [Info @01:00:01.078] System : Microsoft Windows NT 6.2.9200.0 (AMD64) [Info @01:00:01.078] ==================================================================== I can imagine it's a permission problem, but I have no idea where to start ... Can anyone help? Thank you for your time! EDIT I'm not sure if it is related, but I logged in with "backup user" in "TFS Server" and there was this crash window opened with "TFS Power Tool Shell Extension (TfsComProviderSvr) has stopped working". The full crash log is here: Problem signature: Problem Event Name: APPCRASH Application Name: TfsComProviderSvr.exe Application Version: 11.0.50727.0 Application Timestamp: 5050cd2a Fault Module Name: StackHash_e8da Fault Module Version: 6.2.9200.16420 Fault Module Timestamp: 505aaa82 Exception Code: c0000374 Exception Offset: PCH_72_FROM_ntdll+0x00040DA8 OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 1043 Additional Information 1: e8da Additional Information 2: e8dac447e1089515a72386afa6746972 Additional Information 3: d903 Additional Information 4: d9036f986c69f4492a70e4cf004fb44d Does it help? Thanks everyone!

  Read the article

• How to fix massive lag on ZyXEL HomePlug AV powerline adapters?

  - by Tim Abell

  I have 3 ZyXEL Homeplug AV powerline adapters as per the one in the review below. I have two plugged in currently, one into my Be / Thompson wireless router, and one into my desktop pc (box1). every now and then the link indicator on the adapters (the mains link, not the ethernet link) goes nutty, and performance falls off a cliff (see below). http://www.gadgetspeak.com/gadget/article.rhtm/753/479266/ZyXEL_PowerLine_HomePlug_AV_PLA401.html 64 bytes from box1 (192.168.1.101): icmp_seq=1064 ttl=64 time=996 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1065 ttl=64 time=549 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1066 ttl=64 time=6.15 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1067 ttl=64 time=1400 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1068 ttl=64 time=812 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1069 ttl=64 time=11.1 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1070 ttl=64 time=1185 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1071 ttl=64 time=501 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1072 ttl=64 time=1975 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1073 ttl=64 time=970 ms ^C --- box1 ping statistics --- 1074 packets transmitted, 394 received, +487 errors, 63% packet loss, time 1082497ms rtt min/avg/max/mdev = 5.945/598.452/3526.454/639.768 ms, pipe 4 Any idea how to diagnose/fix? I'm on linux so installing the windoze software that came with them is not something I'm terribly keen to do.

  Read the article

• Reasonable automatic HTML to PDF conversion (in UNIX/Linux environment)

  - by Alex Balashov

  Is there a way to generate PDF documents from HTML files automatically in Linux where the PDF offers some kind of reasonable level of resemblance to the input file? A command-line tool - as opposed to an interactive GUI of some kind - is key. I have tried htmldoc and some related cousins, of course. But these tools are hopelessly stone-age; htmldoc doesn't support CSS at all. You won't find a lot of HTML documents these days that don't have at least some CSS styling. I don't really care about stupid effects or minor embellishments, but the issue is that CSS is at the core of most layouts these days; not many folks are using 6 layers of nested tables anymore. So, if the conversion tool has no grasp of CSS whatsoever, it's not just a matter of "the document doesn't look quite right"; it is likely to not meet the minimum standard of usability at all. It has been suggested to me by some folks to try to use the Gecko rendering engine to generate images that can be converted to PDFs, but I have no idea how one would go about doing this, let alone easily. I have no trouble believing that there are good commercial tools that do this, but I'm really looking for an open-source package if possible, as the endeavour itself is an open-source one and doesn't pay. Thanks in advance!

  Read the article

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• Some clients cannot connect to Server 2008 R2 VPN

  - by Robl

  Hi all, Have a server 2008 r2 setup as a VPN server. We have created a windows group to control access to the VPN called vpn-users. Clients are all Windows 7 Pro. This all seems to work fine except some users cannot connect to the VPN! For example I try to logon to the VPN from a client and get an error saying the server refused the connect due to a policy in place. Specifically authentication type! Fine I think. So i drop that user into the vpn-users group created for this and try again and hey presto the user can now logon! Great. Now try this with another user. But this time I get the same error even though I have dropped them into the vpn-users group!! So does anyone have any idea why this works for some users and not for others?? I have tried moving the user from certain OU's in AD to others, copying the account, taking the user out of the vpn-users group and then back in but get the same error each time. Any thoughts anyone?

  Read the article

< Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >