Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 586/627 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >

  • Application error with MyFaces 1.2: java.lang.IllegalStateException: No Factories configured for this Application.

    - by IgorB
    For my app I'm using Tomcat 6.0.x and Mojarra 1.2_04 JSF implementation. It works fine, just I would like to switch now to MyFaces 1.2_10 impl of JSF. During the deployment of my app a get the following error: ERROR [org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/myApp]] StandardWrapper.Throwable java.lang.IllegalStateException: No Factories configured for this Application. This happens if the faces-initialization does not work at all - make sure that you properly include all configuration settings necessary for a basic faces application and that all the necessary libs are included. Also check the logging output of your web application and your container for any exceptions! If you did that and find nothing, the mistake might be due to the fact that you use some special web-containers which do not support registering context-listeners via TLD files and a context listener is not setup in your web.xml. A typical config looks like this; <listener> <listener-class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class> </listener> at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:106) at javax.faces.webapp.FacesServlet.init(FacesServlet.java:137) at org.apache.myfaces.webapp.MyFacesServlet.init(MyFacesServlet.java:113) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1172) at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:992) at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4058) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371) ... Here is part of my web.xml configuration: <servlet> <servlet-name>Faces Servlet</servlet-name> <!-- <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> --> <servlet-class>org.apache.myfaces.webapp.MyFacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> ... <listener> <listener- class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class> </listener> Has anyone experienced similar error, and what should I do i order to fix it? Thanx!

    Read the article

  • Error implementing Dynamic Tab with ListView within each Tab - Tabs don't show up

    - by Jon
    I am trying to create a dyanmic tab application that has tabs on the left for each type of Food (e.g. Pasta, Dairy, etc. including those dynamically defined by user) and for each tab, have a listview connected to a SQLite database that updates. This is in the onCreate method: setContentView(R.layout.foodCabinet_layout); dbHelper = new FoodStorageDBHelper(this); dbHelper.open(); Cursor foodTypes = dbHelper.getAllFoodTypes(); ArrayList<String> typeOfFood = new ArrayList<String>(); typeOfFoods.add(foodTypes.getString(1)); while(foodTypes.moveToNext()){ typeOfFoods.add(foodTypes.getString(1)); } final TabHost tbh = (TabHost)findViewById(R.id.food_tabhost_cabinet); tbh.setup(); for(final String s : typeOfFood){ TabSpec nts = tbh.newTabSpec(s); nts.setIndicator(s.replace('_', ' ')); nts.setContent(new TabHost.TabContentFactory(){ public View createTabContent(String tag) { ListView foodCabinetLV = new ListView(FoodCabinet.this); Cursor mCursor = dbHelper.getAllFoodsWithType(s); // Create an array to specify the fields we want to display in the list (only TITLE) String[] from = new String[]{FoodStorageDBHelper.KEY_NAME, FoodStorageDBHelper.KEY_YEAR,FoodStorageDBHelper.KEY_RANK}; // and an array of the fields we want to bind those fields to (in this case just text1) int[] to = new int[]{R.id.childname,R.id.childyear,R.id.childrank}; // Now create a simple cursor adapter and set it to display SimpleCursorAdapter notes = new SimpleCursorAdapter(FoodCabinet.this, R.layout.food_row, mCursor, from, to); foodCabinetLV.setAdapter(notes); startManagingCursor(mCursor); foodCabinetLV.setOnItemClickListener( new AdapterView.OnItemClickListener() { public void onItemClick(AdapterView arg0, View arg1, int arg2, long arg3) { Intent i = new Intent(); i.setClass(arg0.getContext(), EditFoodDialog.class); i.putExtra(FoodStorageDBHelper.KEY_ROWID, Long.toString(arg3)); startActivityForResult(i, LoadFoodOrganizer.ACTIVITY_EDIT); } }); return foodCabinetLV; } }); } For some reason, it doesn't show anything... it's a blank screen. Any help would be very much appreciated. Let me know! Thanks! Jon

    Read the article

  • Passing Variables Along in a Function

    - by John
    Hello, In the function show_commentbox() below, I would like to pass along the variables $_SESSION['loginid'], $submissionid, $submission, $url, $submittor, $submissiondate, $countcomments, $dispurl. With the setup below, it's not working. How could I change it to make show_commentbox() pass the variables along? Thanks in advance, John index.php: <?php $submission = $_GET['submission']; require_once "header.php"; include "login.php"; include "comments.php"; include "commentformonoff.php"; ?> In header.php: require_once ("function.inc.php"); In comments.php: $uid = $_SESSION['loginid']; $submissiondate = mysql_real_escape_string($_GET['submissiondate']); $submittor = mysql_real_escape_string($_GET['submittor']); $countcomments = mysql_real_escape_string($_GET['countcomments']); $dispurl = mysql_real_escape_string($_GET['dispurl']); $url = mysql_real_escape_string($_GET['url']); $submission = mysql_real_escape_string($_GET['submission']); $submissionid = mysql_real_escape_string($_GET['submissionid']); commentformonoff.php: <?php if (!isLoggedIn()) { if (isset($_POST['cmdlogin'])) { if (checkLogin($_POST['username'], $_POST['password'])) { show_commentbox(); } else { echo "Login to comment"; } } else { echo "Login to comment"; } } else { show_commentbox(); } ?> In display.functions.inc.php: function show_commentbox() { echo '<form action="http://www...com/sandbox/comments/comments2.php" method="post"> <input type="hidden" value="'.$_SESSION['loginid'].'" name="uid"> <input type="hidden" value="'.$submissionid.'" name="submissionid"> <input type="hidden" value="'.$submission.'" name="submission"> <input type="hidden" value="'.$url.'" name="url"> <input type="hidden" value="'.$submittor.'" name="submittor"> <input type="hidden" value="'.$submissiondate.'" name="submissiondate"> <input type="hidden" value="'.$countcomments.'" name="countcomments"> <input type="hidden" value="'.$dispurl.'" name="dispurl"> <label class="addacomment" for="title">Add a comment:</label> <textarea class="commentsubfield" name="comment" type="comment" id="comment" maxlength="1000"></textarea> <div class="commentsubbutton"><input name="submit" type="submit" value="Submit"></div> </form> '; }

    Read the article

  • centering a div without setting width

    - by Daniel
    Is there a way to do this? When using navigation that can change the number of items often, it would be nice not having to calculate the with and updating the css, but just having a solution that works. if that's impossible (I'm assuming it is) can anyone point me to a javascript that can do this? edit re: provide code some code basically I'm working with, what I think is, the most typical setup <div class="main"> <div class="nav"> <ul> <li>short title</li> <li>Item 3 Long title</li> <li>Item 4 Long title</li> <li>Item 5 Long title</li> <li>Item 6 Extra Long title</li> </ul> </div> </div> edit .main { width:100%; text-align:center; } .nav { margin:0 auto; } .nav ul li { display:inline; text-align:left; } the issue I've found with this/these solutions is that the content is nudged to the right adding some right padding (of 40px) seems to fix this across the browsers I'm checking on (O FF IE). .nav { margin:0 auto; padding-right:40px; } I don't know where this value is coming from though and why 40px fixes this. Does anyone know where this is coming from? it's not a margin or padding but no matter what I do the first about 40px can not be used for placement. Maybe it's the ul or li that's adding this. I've had a look at the display:table-cell way of doing this, but there's that complication with IE and it still has the same issue as the other solution edit (final) okay I've tried some things in regard to the indent. I've reset all padding to 0 *{padding:0;} that fixed it, and I don't need to offset the padding (I think I'll leave my whole process up so if anyone comes across this, it'll save them some time) thanks for the comments and replies

    Read the article

  • Makefile issue with compiling a C++ program

    - by Steve
    I recently got MySQL compiled and working on Cygwin, and got a simple test example from online to verify that it worked. The test example compiled and ran successfully. However, when incorporating MySQL in a hobby project of mine it isn't compiling which I believe is due to how the Makefile is setup, I have no experience with Makefiles and after reading tutorials about them, I have a better grasp but still can't get it working correctly. When I try and compile my hobby project I recieve errors such as: Obj/Database.o:Database.cpp:(.text+0x492): undefined reference to `_mysql_insert_id' Obj/Database.o:Database.cpp:(.text+0x4c1): undefined reference to `_mysql_affected_rows' collect2: ld returned 1 exit status make[1]: *** [build] Error 1 make: *** [all] Error 2 Here is my Makefile, it worked with compiling and building the source before I attempted to put in MySQL support into the project. The LIBMYSQL paths are correct, verified by 'mysql_config'. COMPILER = g++ WARNING1 = -Wall -Werror -Wformat-security -Winline -Wshadow -Wpointer-arith WARNING2 = -Wcast-align -Wcast-qual -Wredundant-decls LIBMYSQL = -I/usr/local/include/mysql -L/usr/local/lib/mysql -lmysqlclient DEBUGGER = -g3 OPTIMISE = -O C_FLAGS = $(OPTIMISE) $(DEBUGGER) $(WARNING1) $(WARNING2) -export-dynamic $(LIBMYSQL) L_FLAGS = -lz -lm -lpthread -lcrypt $(LIBMYSQL) OBJ_DIR = Obj/ SRC_DIR = Source/ MUD_EXE = project MUD_DIR = TestP/ LOG_DIR = $(MUD_DIR)Files/Logs/ ECHOCMD = echo -e L_GREEN = \e[1;32m L_WHITE = \e[1;37m L_BLUE = \e[1;34m L_RED = \e[1;31m L_NRM = \e[0;00m DATE = `date +%d-%m-%Y` FILES = $(wildcard $(SRC_DIR)*.cpp) C_FILES = $(sort $(FILES)) O_FILES = $(patsubst $(SRC_DIR)%.cpp, $(OBJ_DIR)%.o, $(C_FILES)) all: @$(ECHOCMD) " Compiling $(L_RED)$(MUD_EXE)$(L_NRM)."; @$(MAKE) -s build build: $(O_FILES) @rm -f $(MUD_EXE) $(COMPILER) -o $(MUD_EXE) $(L_FLAGS) $(O_FILES) @echo " Finished Compiling $(MUD_EXE)."; @chmod g+w $(MUD_EXE) @chmod a+x $(MUD_EXE) @chmod g+w $(O_FILES) $(OBJ_DIR)%.o: $(SRC_DIR)%.cpp @echo " Compiling $@"; $(COMPILER) -c $(C_FLAGS) $< -o $@ .cpp.o: $(COMPILER) -c $(C_FLAGS) $< clean: @echo " Complete compile on $(MUD_EXE)."; @rm -f $(OBJ_DIR)*.o $(MUD_EXE) @$(MAKE) -s build I like the functionality of the Makefile, instead of spitting out all the arguments etc, it just spits out the "Compiling [Filename]" etc. If I add -c to the L_FLAGS then it compiles (I think) but instead spits out stuff like: g++: Obj/Database.o: linker input file unused because linking not done After a full day of trying and research on google, I'm no closer to solving my problem, so I come to you guys to see if you can explain to me why all this is happening and if possible, steps to solve. Regards, Steve

    Read the article

  • Datagrid selects the wrong custom cell in my datagrid...

    - by Markus
    Hi everybody, I am working on a problem since a week soon, but I still couldn't make it work as expected. I have a DataGrid which has HBox with a CheckBox an a Label as itemRenderer (see Code below). When I tap in to the Cell the standard itemEditor pops up and lets you enter the content of the label. Thats the standard behavior. I works fine except for 2 problems: If I enter to much text, the horizontal srollbar pops up, and the cell is filled with that scrollbar. As you see I tried to set the horizontalScrollPolicy to off, but that doesnt work at all... I tried to do that for all the different elements, but the failure is still existent. When I have filled more than one row, there is an other mistake happening. If I tap on a row, the datagrid selects the one below that row. That's only if one line is already selected. If I tap outside the datagrid and then, tap at any row the itemEditor of the right row will show up... Is there anything now wright in the setup of my set data method? __ package components { import mx.containers.HBox; import mx.controls.CheckBox; import mx.controls.Label; public class ChoiceRenderer extends HBox { private var correctAnswer:CheckBox; private var choiceLabel:Label; public function ChoiceRenderer() { super(); paint(); } private function paint():void{ percentHeight = 100; percentWidth = 100; setStyle("horizontalScrollPolicy", "off"); super.setStyle("horizontalScrollPolicy", "off"); correctAnswer = new CheckBox; correctAnswer.setStyle("horizontalScrollPolicy", "off"); addChild(correctAnswer); choiceLabel = new Label; choiceLabel.setStyle("horizontalScrollPolicy", "off"); addChild(choiceLabel); } override public function set data(xmldata:Object):void{ if(xmldata.name() == "BackSide"){ var xmlText:Object = xmldata.TextElements.TextElement.(@position == position)[0]; super.data = xmlText; choiceLabel.text = xmlText.toString(); correctAnswer.selected = xmlText.@correct_answer; } } } Thanks in advance! Markus

    Read the article

  • PHP Strange error "0:". Possible Object syntax problem?

    - by Michael Stone
    I'm trying to transfer a site from one hosting company to another. I was using 000webhost until the client had hosting and a domain. Now that the client has their domain and hosting, using FatCow.com, I can not for the life of me, debug my PHP code. I'm not getting any errors. I have a successful DB connection. If you procedurally display data, it works, but when I try to use my original objects, something is breaking and just returns "0:". I have all errors on. On old server where the site worked: PHP Version 5.2.11 MySQL Version: 5.0.81 On new server where I get the "0:": PHP Version 5.2.12 MySQL Version 5.0.32 I've setup a test page to test just the output of the variables with the DB connection. Below is my code: <?php error_reporting(E_ALL); ini_set('display_errors', '1'); try { $link = mysql_connect('connectionstring', 'username', 'password'); if (!$link) { die('Could not connect: ' . mysql_error()); } else{ $db = mysql_select_db('a8210422_lit'); } if($db){ include_once('admin/classes/clsPOW.php'); include_once('admin/classes/clsProviders.php'); $pow = new POW(); $prov = new Providers(); $new = $pow->getNew(); $newAr = $new->val(); $get = $prov->getAll($newAr['providerId']); $getAr = $get->val(); $img = $getAr['image']; $name = $getAr['provider']; $desc = $getAr['description']; $zip = $getAr['zip']; $web = $getAr['link']; if($zip==0){ $zip = "Unavailable"; } print $img; print $name; print $desc; print $zip; print $web; } else{ print 'fail!'; } } //catch exception catch(Exception $e) { echo 'Message: ' .$e->getMessage(); } ?>

    Read the article

  • UIScrollView Infinite Scrolling

    - by Ben Robinson
    I'm attempting to setup a scrollview with infinite (horizontal) scrolling. Scrolling forward is easy - I have implemented scrollViewDidScroll, and when the contentOffset gets near the end I make the scrollview contentsize bigger and add more data into the space (i'll have to deal with the crippling effect this will have later!) My problem is scrolling back - the plan is to see when I get near the beginning of the scroll view, then when I do make the contentsize bigger, move the existing content along, add the new data to the beginning and then - importantly adjust the contentOffset so the data under the view port stays the same. This works perfectly if I scroll slowly (or enable paging) but if I go fast (not even very fast!) it goes mad! Heres the code: - (void) scrollViewDidScroll:(UIScrollView *)scrollView { float pageNumber = scrollView.contentOffset.x / 320; float pageCount = scrollView.contentSize.width / 320; if (pageNumber > pageCount-4) { //Add 10 new pages to end mainScrollView.contentSize = CGSizeMake(mainScrollView.contentSize.width + 3200, mainScrollView.contentSize.height); //add new data here at (320*pageCount, 0); } //*** the problem is here - I use updatingScrollingContent to make sure its only called once (for accurate testing!) if (pageNumber < 4 && !updatingScrollingContent) { updatingScrollingContent = YES; mainScrollView.contentSize = CGSizeMake(mainScrollView.contentSize.width + 3200, mainScrollView.contentSize.height); mainScrollView.contentOffset = CGPointMake(mainScrollView.contentOffset.x + 3200, 0); for (UIView *view in [mainContainerView subviews]) { view.frame = CGRectMake(view.frame.origin.x+3200, view.frame.origin.y, view.frame.size.width, view.frame.size.height); } //add new data here at (0, 0); } //** MY CHECK! NSLog(@"%f", mainScrollView.contentOffset.x); } As the scrolling happens the log reads: 1286.500000 1285.500000 1284.500000 1283.500000 1282.500000 1281.500000 1280.500000 Then, when pageNumber<4 (we're getting near the beginning): 4479.500000 4479.500000 Great! - but the numbers should continue to go down in the 4,000s but the next log entries read: 1278.000000 1277.000000 1276.500000 1275.500000 etc.... Continiuing from where it left off! Just for the record, if scrolled slowly the log reads: 1294.500000 1290.000000 1284.500000 1280.500000 4476.000000 4476.000000 4473.000000 4470.000000 4467.500000 4464.000000 4460.500000 4457.500000 etc.... Any ideas???? Thanks Ben.

    Read the article

  • Thin & Sinatra not taking port

    - by NekoNova
    I'm having problems settig up my application using Thin and Sinatra. I have created a development-config.ru file that contains the following settings: # This is a rack configuration file to fire up the Sinatra application. # This allows better control and configuration as we are using the modular # approach here for controlling our application. # # Extend the Ruby load path with the root of the API and the lib folder # so that we can automatically include all our own custom classes. This makes # the requiring of files a bit cleaner and easier to maintain. # This is basically what rails does as well. # We also store the root of the API in the ENV settings to ensure we have # always access to the root of the API when building paths. ENV['API_ROOT'] = File.dirname(__FILE__) $:.unshift ENV['API_ROOT'] $:.unshift File.expand_path(File.join(ENV['API_ROOT'], 'lib')) $:.unshift File.expand_path(File.join(ENV['API_ROOT'], 'db')) # Now we can require all the gems used for the entire API by simpling requiring # them here. We can also include the classes that we have defined inside the lib # folder. require 'rubygems' require 'bundler' # Run Bundler to setup our gems properly. This will install all the missing gems on # the system and ensure that the deployment environment is ready to run. Bundler.require # To make the loading easier for the application, we will now automatically load all # models that have been defined inside the lib folder. This ensures that we do not need # to load them anymore anywhere else in our application, as the models will be known to # ruby everywhere. Dir.glob(File.join(ENV['API_ROOT'], 'lib', '**', '*.rb')).each{|file| require file} # Now we will configure the Sinatra application so that we can fire up the entire API. # This requires some detailed settings like whether logging is allowed, the port to be # used and some folder locations. require 'sinatra' require 'app' set :logging, true set :dump_errors, true set :port, 3001 set :views, "#{ENV['API_ROOT']}/views" set :public_folder, "#{ENV['API_ROOT']}/public" set :environment, :test # Start up the Sinatra application with all the settings that we have defined. run App.new This is based upon the information I found on the Sinatra website. However, the problem is that I cannot get the application running on port 3001. If I use thin start -R development-config.ru it runs on port 3000. If I use rackup config-development.ru it runs on port 9696. However I never see Sinatra kick in or run over port 3000. My application looks like this: # Author : Arne De Herdt # Email : # This is the actuall application that will be running under Sinatra # to serve the requests for the billing middleware API. # We use the modular approach here to allow control when deploying # the application using Capistrano. require 'sinatra/base' require 'logger' require 'savon' require 'billcrux' class App < Sinatra::Base # This action responds to POST requests on the URI '/billcrux/register' # and is responsible for handeling registration requests with the # BillCrux payment system. # The post "/billcrux/register" do # do stuff end end Can someone tell me what I am doing wrong?

    Read the article

  • How to get started with testing(jMock)

    - by London
    Hello, I'm trying to learn how to write tests. I'm also learning Java, I was told I should learn/use/practice jMock, I've found some articles online that help to certain extend like : http://www.theserverside.com/news/1365050/Using-JMock-in-Test-Driven-Development http://jeantessier.com/SoftwareEngineering/Mocking.html#jMock And most articles I found was about test driven development, write tests first then write code to make the test pass. I'm not looking for that at the moment, I'm trying to write tests for already existing code with jMock. The official documentation is vague to say the least and just too hard for me. Does anybody have better way to learn this. Good books/links/tutorials would help me a lot. thank you EDIT - more concrete question : http://jeantessier.com/SoftwareEngineering/Mocking.html#jMock - from this article Tried this to mock this simple class : import java.util.Map; public class Cache { private Map<Integer, String> underlyingStorage; public Cache(Map<Integer, String> underlyingStorage) { this.underlyingStorage = underlyingStorage; } public String get(int key) { return underlyingStorage.get(key); } public void add(int key, String value) { underlyingStorage.put(key, value); } public void remove(int key) { underlyingStorage.remove(key); } public int size() { return underlyingStorage.size(); } public void clear() { underlyingStorage.clear(); } } Here is how I tried to create a test/mock : public class CacheTest extends TestCase { private Mockery context; private Map mockMap; private Cache cache; @Override @Before public void setUp() { context = new Mockery() { { setImposteriser(ClassImposteriser.INSTANCE); } }; mockMap = context.mock(Map.class); cache = new Cache(mockMap); } public void testCache() { context.checking(new Expectations() {{ atLeast(1).of(mockMap).size(); will(returnValue(int.class)); }}); } } It passes the test and basically does nothing, what I wanted is to create a map and check its size, and you know work some variations try to get a grip on this. Understand better trough examples, what else could I test here or any other exercises would help me a lot. tnx

    Read the article

  • Monitoring UDP socket in glib(mm) eats up CPU time

    - by Gyorgy Szekely
    Hi, I have a GTKmm Windows application (built with MinGW) that receives UDP packets (no sending). The socket is native winsock and I use glibmm IOChannel to connect it to the application main loop. The socket is read with recvfrom. My problem is: this setup eats 25% percent CPU time on a 3GHz workstation. Can somebody tell me why? The application is idle in this case, and if I remove the UDP code, CPU usage drops down to almost zero. As the application has to perform some CPU intensive tasks, I could image better ways to spend that 25% Here are some code excerpts: (sorry for the printf's ;) ) /* bind */ void UDPInterface::bindToPort(unsigned short port) { struct sockaddr_in target; WSADATA wsaData; target.sin_family = AF_INET; target.sin_port = htons(port); target.sin_addr.s_addr = 0; if ( WSAStartup ( 0x0202, &wsaData ) ) { printf("WSAStartup failed!\n"); exit(0); // :) WSACleanup(); } sock = socket( AF_INET, SOCK_DGRAM, 0 ); if (sock == INVALID_SOCKET) { printf("invalid socket!\n"); exit(0); } if (bind(sock,(struct sockaddr*) &target, sizeof(struct sockaddr_in) ) == SOCKET_ERROR) { printf("failed to bind to port!\n"); exit(0); } printf("[UDPInterface::bindToPort] listening on port %i\n", port); } /* read */ bool UDPInterface::UDPEvent(Glib::IOCondition io_condition) { recvfrom(sock, (char*)buf, BUF_SIZE*4, 0, NULL, NULL); /* process packet... */ } /* glibmm connect */ Glib::RefPtr channel = Glib::IOChannel::create_from_win32_socket(udp.sock); Glib::signal_io().connect( sigc::mem_fun(udp, &UDPInterface::UDPEvent), channel, Glib::IO_IN ); I've read here in some other question, and also in glib docs (g_io_channel_win32_new_socket()) that the socket is put into nonblocking mode, and it's "a side-effect of the implementation and unavoidable". Does this explain the CPU effect, it's not clear to me? Whether or not I use glib to access the socket or call recvfrom() directly doesn't seem to make much difference, since CPU is used up before any packet arrives and the read handler gets invoked. Also glibmm docs state that it's ok to call recvfrom() even if the socket is polled (Glib::IOChannel::create_from_win32_socket()) I've tried compiling the program with -pg and created a per function cpu usage report with gprof. This wasn't usefull because the time is not spent in my program, but in some external glib/glibmm dll.

    Read the article

  • MATLAB plot moving data points in seperate subplots simutaneously

    - by Nate B.
    I wish to visualize the movement of a data point throughout space across a period of time within MATLAB. However, the way I want my figure to display is such that only a single instant is plotted at any given time. That was easy, I simply created a for loop to update my 3D plot display for every set of coordinates (x,y,z) in my data. However, I wish to display 4 different viewing angles of this plot at all times. I am well aware of how to setup subplots within MATLAB, that is not the issue. My issue is getting all 4 of these subplots to execute simultaneously so that all 4 subplots are always displaying the same point in time. I would appreciate if anyone could suggest how to handle this issue. As requested, my code for a figure with a single plot is shown below: datan = DATA; %data in form of x,y,z,a,b,c by column for row# of time points tib=zeros(size(datan,1),12); tib(:,1:3) = datan(:,1:3); tib_ref=tib(1,1:3); for i=1:size(datan,1) tib(i,1:3)=tib(i,1:3)-tib_ref; end angle_to_dircos close all figure('Name','Directions (Individual Cycles)','NumberTitle','off') for cc=1:2 hold off for bb=1:10:size(tib,1); scatter3(tib(bb,1),tib(bb,2),tib(bb,3),'green','filled'); %z and y axes are flipped in polhemus system hold on p0 = [tib(bb,1),tib(bb,2),tib(bb,3)]; p1 = [tib(bb,1)+10*tib(bb,4),tib(bb,2)+10*tib(bb,5),tib(bb,3)+10*tib(bb,6)]; p2 = [tib(bb,1)+10*tib(bb,7),tib(bb,2)+10*tib(bb,8),tib(bb,3)+10*tib(bb,9)]; p3 = [-(tib(bb,1)+100*tib(bb,10)),-(tib(bb,2)+100*tib(bb,11)),-(tib(bb,3)+100*tib(bb,12))]; vectarrow(p0,p1,1,0,0) hold on vectarrow(p0,p2,0,1,0) hold on vectarrow(p0,p3,0,0,1) hold on az = 90; el = 0; view(az, el); xlim([-50,50]); ylim([-50,50]); zlim([-50,50]); xlabel('distance from center in X'); ylabel('distance from center in Y'); zlabel('distance from center in Z'); title('XYZ Scatter Plots of Tracker Position'); hold on plot3(0,0,0,'sk','markerfacecolor',[0,0,0]); p0 = [0,0,0]; p1 = [10,0,0]; p2 = [0,10,0]; p3 = [0,0,100]; vectarrow(p0,p1,1,0,0) hold on vectarrow(p0,p2,0,1,0) hold on vectarrow(p0,p3,1,0,1) drawnow; end end

    Read the article

  • Polymorphic :has_many, :through as module in Rails 3.1 plugin

    - by JohnMetta
    I've search everywhere for a pointer to this, but can't find one. Basically, I want to do what everyone else wants to do when they create a polymorphic relationship in a :has_many, :through way… but I want to do it in a module. I keep getting stuck and think I must be overlooking something simple. To wit: module ActsPermissive module PermissiveUser def self.included(base) base.extend ClassMethods end module ClassMethods def acts_permissive has_many :ownables has_many :owned_circles, :through => :ownables end end end class PermissiveCircle < ActiveRecord::Base belongs_to :ownable, :polymorphic => true end end With a migration that looks like this: create_table :permissive_circles do |t| t.string :ownable_type t.integer :ownable_id t.timestamps end The idea, of course, is that whatever loads acts_permissive will be able to have a list of circles that it owns. For simple tests, I have it "should have a list of circles" do user = Factory :user user.owned_circles.should be_an_instance_of Array end which fails with: Failure/Error: @user.circles.should be_an_instance_of Array NameError: uninitialized constant User::Ownable I've tried: using :class_name => 'ActsPermissive::PermissiveCircle' on the has_many :ownables line, which fails with: Failure/Error: @user.circles.should be_an_instance_of Array ActiveRecord::HasManyThroughSourceAssociationNotFoundError: Could not find the source association(s) :owned_circle or :owned_circles in model ActsPermissive::PermissiveCircle. Try 'has_many :owned_circles, :through => :ownables, :source => <name>'. Is it one of :ownable? while following the suggestion and setting :source => :ownable fails with Failure/Error: @user.circles.should be_an_instance_of Array ActiveRecord::HasManyThroughAssociationPolymorphicSourceError: Cannot have a has_many :through association 'User#owned_circles' on the polymorphic object 'Ownable#ownable' Which seems to suggest that doing things with a non-polymorphic-through is necessary. So I added a circle_owner class similar to the setup here: module ActsPermissive class CircleOwner < ActiveRecord::Base belongs_to :permissive_circle belongs_to :ownable, :polymorphic => true end module PermissiveUser def self.included(base) base.extend ClassMethods end module ClassMethods def acts_permissive has_many :circle_owners, :as => :ownable has_many :circles, :through => :circle_owners, :source => :ownable, :class_name => 'ActsPermissive::PermissiveCircle' end end class PermissiveCircle < ActiveRecord::Base has_many :circle_owners end end With a migration: create_table :permissive_circles do |t| t.string :name t.string :guid t.timestamps end create_table :circle_owner do |t| t.string :ownable_type t.string :ownable_id t.integer :permissive_circle_id end which still fails with: Failure/Error: @user.circles.should be_an_instance_of Array NameError: uninitialized constant User::CircleOwner Which brings us back to the beginning. How can I do what seems to be a rather common polymorphic :has_many, :through on a module? Alternatively, is there a good way to allow an object to be collected by arbitrary objects in a similar way that will work with a module?

    Read the article

  • Using Kal calendar without doing the initialization (and so on) in the AppDelegate

    - by testing
    I'm using the Kal calendar. For the code shown below I'm referring to the Holiday example. In this example the allocation and initialization of Kal is done in the applicationDidFinishLaunching in the AppDelegate. The UITableViewDelegate protocol (e.g. didSelectRowAtIndexPath) is also positioned in the AppDelegate class. The AppDelegate: #import "HolidayAppDelegate.h" #import "HolidaySqliteDataSource.h" #import "HolidaysDetailViewController.h" ## Heading ###import "Kal.h" @implementation HolidayAppDelegate @synthesize window; - (void)applicationDidFinishLaunching:(UIApplication *)application { kal = [[KalViewController alloc] init]; kal.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithTitle:@"Today" style:UIBarButtonItemStyleBordered target:self action:@selector(showAndSelectToday)] autorelease]; kal.delegate = self; dataSource = [[HolidaySqliteDataSource alloc] init]; kal.dataSource = dataSource; // Setup the navigation stack and display it. navController = [[UINavigationController alloc] initWithRootViewController:kal]; [window addSubview:navController.view]; [window makeKeyAndVisible]; } // Action handler for the navigation bar's right bar button item. - (void)showAndSelectToday { [kal showAndSelectDate:[NSDate date]]; } #pragma mark UITableViewDelegate protocol conformance // Display a details screen for the selected holiday/row. - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { Holiday *holiday = [dataSource holidayAtIndexPath:indexPath]; HolidaysDetailViewController *vc = [[[HolidaysDetailViewController alloc] initWithHoliday:holiday] autorelease]; [navController pushViewController:vc animated:YES]; } #pragma mark - - (void)dealloc { [kal release]; [dataSource release]; [window release]; [navController release]; [super dealloc]; } @end I don't want to put this into the AppDelegate, because there could be some overlapping code with other views. It should be a separate "component" which I can call and put on the stack. In my navigation based project I have a main view, the RootViewController. From there I want to push the Kal view on the stack. Currently I'm pushing an additional ViewController on the stack. In the viewWillAppear method from this ViewController I do the things shown in the code above. The following problems appear: Navigation back has to be done two times (one for the Kal calendar, one for my created view) Navigation to my main view is not possible anymore In the moment I don't know where to put this code. So the question is where to put the methods for allocation/initialization as well as the methods for the UITableViewDelegate protocol.

    Read the article

  • WPF windows locked when calling webservice. Even when run asynchronously

    - by SumGuy
    Hi there. I'm having a big problem when calling a web service from my WPF application. The application/window locks until the process has completed. I've attempted to run this asynchronously but the problem still persists. Currently, the web service call I'm making can last 45-60 seconds. It runs a process on the server to fetch a big chunk of data. As it take a little while I wanted to have a progress bar moving indeterminately for the user to see that the application hasn't stalled or anything (you know how impatatient they get). So: private void btnSelect_Click(object sender, RoutedEventArgs e) { wDrawingList = new WindowDrawingList(systemManager); AsyncMethodHandler caller = default(AsyncMethodHandler); caller = new AsyncMethodHandler(setupDrawingList); // open new thread with callback method caller.BeginInvoke((Guid)((Button)sender).Tag, MyAsyncCallback, null); } Click a button and the app will create the form that the async stuff will be posted to and set up the async stuff calling the async method. public bool setupDrawingList(Guid ID) { if (systemManager.set(ID)) { wDrawingList.Dispatcher.Invoke(DispatcherPriority.Background, new Action(() => { wDrawingList.ShowForm(); Hide(); })); return true; } return false; } This is the async method. The showForm method contains the calls to setup the new form including the monster web service call public void MyAsyncCallback(IAsyncResult ar) { // Because you passed your original delegate in the asyncState parameter of the Begin call, you can get it back here to complete the call. MethodDelegate dlgt = (MethodDelegate)ar.AsyncState; // Complete the call. bool output = dlgt.EndInvoke(ar); try { // Retrieve the delegate. AsyncResult result = (AsyncResult)ar; AsyncMethodHandler caller = (AsyncMethodHandler)result.AsyncDelegate; // Because this method is running from secondary thread it can never access ui objects because they are created // on the primary thread. // Call EndInvoke to retrieve the results. bool returnValue = caller.EndInvoke(ar); // Still on secondary thread, must update ui on primary thread UpdateUI(returnValue == true ? "Success" : "Failed"); } catch (Exception ex) { string exMessage = null; exMessage = "Error: " + ex.Message; UpdateUI(exMessage); } } public void UpdateUI(string outputValue) { // Get back to primary thread to update ui UpdateUIHandler uiHandler = new UpdateUIHandler(UpdateUIIndicators); string results = outputValue; // Run new thread off Dispatched (primary thread) this.Dispatcher.Invoke(System.Windows.Threading.DispatcherPriority.Normal, uiHandler, results); } public void UpdateUIIndicators(string outputValue) { // update user interface controls from primary UI thread sbi3.Content = "Processing Completed."; } Any help or theories are appreciated. I'm at a loss. Thanks in advance

    Read the article

  • Why my json_encode get corrupted

    - by Cullen SUN
    $model = new XUploadForm; $model->file = CUploadedFile::getInstance( $model, 'file' ); //We check that the file was successfully uploaded if( $model->file !== null ) { //Grab some data $model->mime_type = $model->file->getType( ); $model->size = $model->file->getSize( ); $model->name = $model->file->getName( ); $file_extention = $model->file->getExtensionName( ); //(optional) Generate a random name for our file $file_tem_name = md5(Yii::app( )->user->id.microtime( ).$model->name); $file_thumb_name = $file_tem_name.'_thumb.'.$file_extention; $file_image_name = $file_tem_name.".".$file_extention; if( $model->validate( ) ) { //Move our file to our temporary dir $model->file->saveAs( $path.$file_image_name ); if(chmod($path.$file_image_name, 0777 )){ // Yii::import("ext.EPhpThumb.EPhpThumb"); // $thumb_=new EPhpThumb(); // $thumb_->init(); // $thumb_->create($path.$file_image_name) // ->resize(110,80) // ->save($path.$file_thumb_name); } //here you can also generate the image versions you need //using something like PHPThumb //Now we need to save this path to the user's session if( Yii::app( )->user->hasState( 'images' ) ) { $userImages = Yii::app( )->user->getState( 'images' ); } else { $userImages = array(); } $userImages[] = array( "filename" => $file_image_name, 'size' => $model->size, 'mime' => $model->mime_type, "path" => $path.$file_image_name, // "thumb" => $path.$file_thumb_name, ); Yii::app( )->user->setState('images', $userImages); //Now we need to tell our widget that the upload was succesfull //We do so, using the json structure defined in // https://github.com/blueimp/jQuery-File-Upload/wiki/Setup echo json_encode( array( array( "type" => $model->mime_type, "size" => $model->size, "url" => $publicPath.$file_image_name, //"thumbnail_url" => $publicPath.$file_thumb_name, //"thumbnail_url" => $publicPath."thumbs/$filename", "delete_url" => $this->createUrl( "upload", array( "_method" => "delete", "file" => $file_image_name ) ), "delete_type" => "POST" ) ) ); Above code give me correct response, [{"type":"image/jpeg","size":2266,"url":"/uploads/tmp/0b00cbaee07c6410241428c74aae1dca.jpeg","delete_url":"/api/imageUpload/upload?_method=delete&file=0b00cbaee07c6410241428c74aae1dca.jpeg","delete_type":"POST"}] but if I uncomment the following // Yii::import("ext.EPhpThumb.EPhpThumb"); // $thumb_=new EPhpThumb(); // $thumb_->init(); // $thumb_->create($path.$file_image_name) // ->resize(110,80) // ->save($path.$file_thumb_name); it gave me corrupted response: Mac OS X 2??ATTR?dA??Y?Ycom.apple.quarantine0001;50655994;Google\x20Chrome.app;2599ECF9-69C5-4386-B3D9-9F5CC7E0EE1D|com.google.ChromeThis resource fork intentionally left blank ??[{"type":"image/jpeg","size":1941,"url":"/uploads/tmp/409c5921c6d20944e1a81f32b12fc380.jpeg","delete_url":"/api/imageUpload/upload?_method=delete&file=409c5921c6d20944e1a81f32b12fc380.jpeg","delete_type":"POST"}]

    Read the article

  • OpenGL ES functions not accepting values originating outside of it's view

    - by Josh Elsasser
    I've been unable to figure this out on my own. I currently have an Open GLES setup where a view controller both updates a game world (with a dt), fetches the data I need to render, passes it off to an EAGLView through two structures (built of Apple's ES1Renderer), and draws the scene. Whenever a value originates outside of the Open GL view, it can't be used to either translate objects using glTranslatef, or set up the scene using glOrthof. If I assign a new value to something, it will work - even if it is the exact same number. The two structures I have each contain a variety of floating-point numbers and booleans, along with two arrays. I can log the values from within my renderer - they make it there - but I receive errors from OpenGL if I try to do anything with them. No crashes result, but the glOrthof call doesn't work if I don't set the camera values to anything different. Code used to set up scene: [EAGLContext setCurrentContext:context]; glBindFramebufferOES(GL_FRAMEBUFFER_OES, viewFramebuffer); //clears the color buffer bit glClear(GL_COLOR_BUFFER_BIT); glMatrixMode(GL_PROJECTION); //sets up the scene w/ ortho projection glViewport(0, 0, 320, 480); glLoadIdentity(); glOrthof(320, 0, dynamicData.cam_x2, dynamicData.cam_x1, 1.0, -1.0); glClearColor(1.0, 1.0, 1.0, 1.0); /*error checking code here*/ "dynamicData" (which is replaced every frame) is created within my game simulation. From within my controller, I call a method (w/in my simulation) that returns it, and pass the result on to the EAGLView, which passes it on to the renderer. I haven't been able to come up with a better solution for this - suggestions in this regard would be greatly appreciated as well. Also, this function doesn't work as well (values originate in the same place): glTranslatef(dynamicData.ship_x, dynamicData.ship_y, 0.0); Thanks in advance. Additional Definitions: Structure (declared in a separate header): typedef struct { float ship_x, ship_y; float cam_x1, cam_x2; } dynamicRenderData; Render data getter (and builder) (every frame) - (dynamicData)getDynRenderData { //d_rd is an ivar, zeroed on initialization d_rd.ship_x = mainShip.position.x; d_rd.ship_y = mainShip.position.y; d_rd.cam_x1 = d_rd.ship_x - 30.0f; d_rd.cam_x2 = d_rd.cam_x1 + 480.0f; return d_rd; } Zeroed at start. (d_rd.ship_x = 0;, etc…) Setting up the view. Prototype (GLView): - (void)draw: (dynamicRenderData)dynamicData Prototype (Renderer): - (void)drawView: (dynamicRenderData)dynamicData How it's called w/in the controller: //controller [glview draw: [world getDynRenderData]]; //glview (within draw) [renderer drawView: dynamicData];

    Read the article

  • Jquery $.post and PHP - Prevent the ability to use script outside of main website.

    - by Tim
    I have a PHP script setup using Jquery $.post which would return a response or do an action within the targeted .php file within $.post. Eg. My page has a form where you type in your Name. Once you hit the submit form button, $.post is called and sends the entered Name field value into "mywebsite.xyz/folder/ajaxscript.php" If a user was to visit "mywebsite.xyz/folder/ajaxscript.php" directly and somehow POST the data to the script, the script would return a response / do an action, based on the submitted POST data. The problem is, I don't want others to be able to periodically "call" an action or request a response from my website without using the website directly. Theoretically, right now you could determine what Name values my website allows without even visiting it, or you could call an action without going through the website, by simply visiting "mywebsite.xyz/folder/ajaxscript.php" So, what measures can I take to prevent this from happening? So far my idea is to ensure that it is a $_POST and not a $_GET - so they cannot manually enter it into the browser, but they could still post data to the script... Another measure is to apply a session key that expires, and is only valid for X amount of visits until they revisit the website. ~ Or, just have a daily "code" that changes and they'd need to grab this code from the website each day to keep their direct access to the script working (eg. I pass the daily "code" into each post request. I then check that code matches in the ajax php script.) However, even with these meaures, they will STILL have access to the scripts so long as they know how to POST the data, and also get the new code each day. Also, having a daily code requirement will cause issues when visiting the site at midnight (12:00am) as the code will change and the script will break for someone who is on the website trying to call the script, with the invalid code being passed still. I have attempted using .htaccess however using: order allow,deny deny from all Prevents legitimate access, and I'd have to add an exception so the website's IP is allowed to access it.. which is a hassle to update I think. Although, if it's the only legitimate solution I guess I'll have to. If I need to be more clear please let me know.

    Read the article

  • PHP, MySQL - My own version of SALT (I call salty) - Login Issue

    - by Fabio Anselmo
    Ok I wrote my own version of SALT I call it salty lol don't make fun of me.. Anyway the registration part of my script as follows is working 100% correctly. //generate SALTY my own version of SALT and I likes me salt.. lol function rand_string( $length ) { $chars = "ABCDEFGHIJKLMNOPQRSTUWXYZabcdefghijklmnopqrstuwxyz1234567890"; $size = strlen( $chars ); for( $i = 0; $i < $length; $i++ ) { $str .= $chars[ rand( 0, $size - 1 ) ]; } return $str; } $salty = rand_string( 256 ); //generate my extra salty pw $password = crypt('password'); $hash = $password . $salty; $newpass = $hash; //insert the data in the database include ('../../scripts/dbconnect.php'); //Update db record with my salty pw ;) // TESTED WITH AND WITHOUT SALTY //HENCE $password and $newpass mysql_query("UPDATE `Register` SET `Password` = '$password' WHERE `emailinput` = '$email'"); mysql_close($connect); However my LOGIN script is failing. I have it setup to TEST and echo if its login or not. It always returns FAILED. I entered the DB and changed the crypted salty pw to "TEST" and I got a SUCCESS. So my problem is somewhere in this LOGIN script I assume. Now I am not sure how to implement my $Salty in this. But also be advised that even without SALTY (just using crypt to store my pass) - I was still unable to perform a login successfully. And if you're gonna suggest i use blowfish - note that my webhost doesn't have it supported and i don't know how to install it. here's my login script: if (isset($_POST['formsubmitted'])) { include ('../../scripts/dbconnect.php'); $username = mysql_real_escape_string($_POST['username']); $password = crypt(mysql_real_escape_string($_POST['password'])); $qry = "SELECT ID FROM Register WHERE emailinput='$username' AND Password='$password'"; $result = mysql_query($qry); if(mysql_num_rows($result) > 0) { echo 'SUCCESS'; //START SESSION } else { echo 'FAILED'; //YOU ARE NOT LOGGED IN } } So what's wrong with this login? Why isn't it working just using the crypt/storing only crypt? How can i make it work storing both the crypt and randomly generated SALTY :) ? Ty advance

    Read the article

  • Migrating from hand-written persistence layer to ORM

    - by Sergey Mikhanov
    Hi community, We are currently evaluating options for migrating from hand-written persistence layer to ORM. We have a bunch of legacy persistent objects (~200), that implement simple interface like this: interface JDBC { public long getId(); public void setId(long id); public void retrieve(); public void setDataSource(DataSource ds); } When retrieve() is called, object populates itself by issuing handwritten SQL queries to the connection provided using the ID it received in the setter (this usually is the only parameter to the query). It manages its statements, result sets, etc itself. Some of the objects have special flavors of retrive() method, like retrieveByName(), in this case a different SQL is issued. Queries could be quite complex, we often join several tables to populate the sets representing relations to other objects, sometimes join queries are issued on-demand in the specific getter (lazy loading). So basically, we have implemented most of the ORM's functionality manually. The reason for that was performance. We have very strong requirements for speed, and back in 2005 (when this code was written) performance tests has shown that none of mainstream ORMs were that fast as hand-written SQL. The problems we are facing now that make us think of ORM are: Most of the paths in this code are well-tested and are stable. However, some rarely-used code is prone to result set and connection leaks that are very hard to detect We are currently squeezing some additional performance by adding caching to our persistence layer and it's a huge pain to maintain the cached objects manually in this setup Support of this code when DB schema changes is a big problem. I am looking for an advice on what could be the best alternative for us. As far as I know, ORMs has advanced in last 5 years, so it might be that now there's one that offers an acceptable performance. As I see this issue, we need to address those points: Find some way to reuse at least some of the written SQL to express mappings Have the possibility to issue native SQL queries without the necessity to manually decompose their results (i.e. avoid manual rs.getInt(42) as they are very sensitive to schema changes) Add a non-intrusive caching layer Keep the performance figures. Is there any ORM framework you could recommend with regards to that?

    Read the article

  • Mocking methods that call other methods Still hit database.Can I avoid it?

    - by devnet247
    Hi, It has been decided to write some unit tests using moq etc..It's lots of legacy code c# (this is beyond my control so cannot answer the whys of this) Now how do you cope with a scenario when you dont want to hit the database but you indirectly still hit the database? This is something I put together it's not the real code but gives you an idea. How would you deal with this sort of scenario? Basically calling a method on a mocked interface still makes a dal call as inside that method there are other methods not part of that interface?Hope it's clear [TestFixture] public class Can_Test_this_legacy_code { [Test] public void Should_be_able_to_mock_login() { var mock = new Mock<ILoginDal>(); User user; var userName = "Jo"; var password = "password"; mock.Setup(x => x.login(It.IsAny<string>(), It.IsAny<string>(),out user)); var bizLogin = new BizLogin(mock.Object); bizLogin.Login(userName, password, out user); } } public class BizLogin { private readonly ILoginDal _login; public BizLogin(ILoginDal login) { _login = login; } public void Login(string userName, string password, out User user) { //Even if I dont want to this will call the DAL!!!!! var bizPermission = new BizPermission(); var permissionList = bizPermission.GetPermissions(userName); //Method I am actually testing _login.login(userName,password,out user); } } public class BizPermission { public List<Permission>GetPermissions(string userName) { var dal=new PermissionDal(); var permissionlist= dal.GetPermissions(userName); return permissionlist; } } public class PermissionDal { public List<Permission> GetPermissions(string userName) { //I SHOULD NOT BE GETTING HERE!!!!!! return new List<Permission>(); } } public interface ILoginDal { void login(string userName, string password,out User user); } public interface IOtherStuffDal { List<Permission> GetPermissions(); } public class Permission { public int Id { get; set; } public string Name { get; set; } } Any suggestions? Am I missing the obvious? Is this Untestable code? Very very grateful for any suggestions.

    Read the article

  • Multi-threaded Pooled Allocators

    - by Darren Engwirda
    I'm having some issues using pooled memory allocators for std::list objects in a multi-threaded application. The part of the code I'm concerned with runs each thread function in isolation (i.e. there is no communication or synchronization between threads) and therefore I'd like to setup separate memory pools for each thread, where each pool is not thread-safe (and hence fast). I've tried using a shared thread-safe singleton memory pool and found the performance to be poor, as expected. This is a heavily simplified version of the type of thing I'm trying to do. A lot has been included in a pseudo-code kind of way, sorry if it's confusing. /* The thread functor - one instance of MAKE_QUADTREE created for each thread */ class make_quadtree { private: /* A non-thread-safe memory pool for int linked list items, let's say that it's * something along the lines of BOOST::OBJECT_POOL */ pooled_allocator<int> item_pool; /* The problem! - a local class that would be constructed within each std::list as the * allocator but really just delegates to ITEM_POOL */ class local_alloc { public : //!! I understand that I can't access ITEM_POOL from within a nested class like //!! this, that's really my question - can I get something along these lines to //!! work?? pointer allocate (size_t n) { return ( item_pool.allocate(n) ); } }; public : make_quadtree (): item_pool() // only construct 1 instance of ITEM_POOL per // MAKE_QUADTREE object { /* The kind of data structures - vectors of linked lists * The idea is that all of the linked lists should share a local pooled allocator */ std::vector<std::list<int, local_alloc>> lists; /* The actual operations - too complicated to show, but in general: * * - The vector LISTS is grown as a quadtree is built, it's size is the number of * quadtree "boxes" * * - Each element of LISTS (each linked list) represents the ID's of items * contained within each quadtree box (say they're xy points), as the quadtree * is grown a lot of ID pop/push-ing between lists occurs, hence the memory pool * is important for performance */ } }; So really my problem is that I'd like to have one memory pool instance per thread functor instance, but within each thread functor share the pool between multiple std::list objects.

    Read the article

  • Remote Postgresql - extremely slow

    - by Muffinbubble
    Hi, I have setup PostgreSQL on a VPS I own - the software that accesses the database is a program called PokerTracker. PokerTracker logs all your hands and statistics whilst playing online poker. I wanted this accessible from several different computers so decided to installed it on my VPS and after a few hiccups I managed to get it connecting without errors. However, the performance is dreadful. I have done tons of research on 'remote postgresql slow' etc and am yet to find an answer so am hoping someone is able to help. Things to note: The query I am trying to execute is very small. Whilst connecting locally on the VPS, the query runs instantly. While running it remotely, it takes about 1 minute and 30 seconds to run the query. The VPS is running 100MBPS and then computer I'm connecting to it from is on an 8MB line. The network communication between the two is almost instant, I am able to remotely connect fine with no lag whatsoever and am hosting several websites running MSSQL and all the queries run instantly, whether connected remotely or locally so it seems specific to PostgreSQL. I'm running their newest version of the software and the newest compatible version of PostgreSQL with their software. The database is a new database, containing hardly any data and I've ran vacuum/analyze etc all to no avail, I see no improvements. I don't understand how MSSQL can query almost instantly yet PostgreSQL struggles so much. I am able to telnet to the post 5432 on the VPS IP with no problems, and as I say the query does execute it just takes an extremely long time. What I do notice is on the router when the query is running that hardly any bandwidth is being used - but then again I wouldn't expect it to for a simple query but am not sure if this is the issue. I've tried connecting remotely on 3 different networks now (including different routers) but the problem remains. Connecting remotely via another machine via the LAN is instant. I have also edited the postgre conf file to allow for more memory/buffers etc but I don't think this is the problem - what I am asking it to do is very simple - it shouldn't be intensive at all. Thanks, Ricky

    Read the article

  • Rails send mail with GMail

    - by Danny McClelland
    Hi Everyone, I am on rails 2.3.5 and have the latest Ruby installed and my application is running well, except, GMail emails. I am trying to setup my gmail imap connection which has worked previously but now doesnt want to know. This is my code: # Be sure to restart your server when you modify this file # Uncomment below to force Rails into production mode when # you don't control web/app server and can't set it the proper way # ENV['RAILS_ENV'] ||= 'production' # Specifies gem version of Rails to use when vendor/rails is not present RAILS_GEM_VERSION = '2.3.5' unless defined? RAILS_GEM_VERSION # Bootstrap the Rails environment, frameworks, and default configuration require File.join(File.dirname(__FILE__), 'boot') Rails::Initializer.run do |config| # Gems config.gem "capistrano-ext", :lib => "capistrano" config.gem "configatron" # Make Time.zone default to the specified zone, and make Active Record store time values # in the database in UTC, and return them converted to the specified local zone. config.time_zone = "London" # The internationalization framework can be changed to have another default locale (standard is :en) or more load paths. # All files from config/locales/*.rb,yml are added automatically. # config.i18n.load_path << Dir[File.join(RAILS_ROOT, 'my', 'locales', '*.{rb,yml}')] #config.i18n.default_locale = :de # Your secret key for verifying cookie session data integrity. # If you change this key, all old sessions will become invalid! # Make sure the secret is at least 30 characters and all random, # no regular words or you'll be exposed to dictionary attacks. config.action_controller.session = { :session_key => '_base_session', :secret => '7389ea9180b15f1495a5e73a69a893311f859ccff1ffd0fa2d7ea25fdf1fa324f280e6ba06e3e5ba612e71298d8fbe7f15fd7da2929c45a9c87fe226d2f77347' } config.active_record.observers = :user_observer end ActiveSupport::CoreExtensions::Date::Conversions::DATE_FORMATS.merge!(:default => '%d/%m/%Y') ActiveSupport::CoreExtensions::Time::Conversions::DATE_FORMATS.merge!(:default => '%d/%m/%Y') require "will_paginate" ActionMailer::Base.delivery_method = :smtp ActionMailer::Base.smtp_settings = { :enable_starttls_auto => true, :address => "smtp.gmail.com", :port => 587, :domain => "XXXXXXXX.XXX", :authentication => :plain, :user_name => "XXXXXXXXXX.XXXXXXXXXX.XXX", :password => "XXXXX" } But the above just results in an SMTP auth error in the production log. I have read varied reports of this not working in Rails 2.2.2 but nothing for 2.3.5, anyone got any ideas? Thanks, Danny

    Read the article

  • How do I make a full screen scrolling messagebox or window?

    - by chobo2
    Hi First let me start of saying I know absolutely nothing about c++ and I am really just more interested in getting this to work then learning c++(I got enough on my plate to learn). So basically I am trying to make a terms of service for my windows mobile 6 professional application but it seems I need to use c++ to do it. After hours of searching I found a solution but it developed for windows mobile standard. So they somehow used c++ to make a message box and on standard devices(ie non touch screen phones) the message box can have like scrolling. For some reason this is not the case with professional devices(touch screen devices). So my message box goes off the page and you can never accept or decline the terms. So your stuck and on the screen forever till you do some sort of soft restart. http://www.mobilepractices.com/2008/10/setupdll-sample-and-walkthrough-terms.html The above link is the tutorial but here is the actual file that seems to display the message. #include "stdafx.h" #include "ce_setup.h" // This is a variable containing the text to be displayed // in the Terms & Conditions dialog TCHAR Message[] = _T("TERMS & CONDITIONS\r\n ") _T("Selecting YES you're accepting our terms & conditions.\r\n") _T("This is just a sample application.\r\n") _T("From http://www.mobilepractices.com\r\n") _T("You can replace this text with your own.\r\n") _T("We're using a setup.dll to show this dialog.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Extra line to force vertical scrollbar.\r\n") _T("Last line.\r\n") ; // This function will be called when the user // tries to install the cab. According to its return // value the installation continues or is cancelled. // As this could be called more than once // (i.e. if there is not enough space on the target) // we should take care about fFirstCall parameter // to show the dialog only once. codeINSTALL_INIT Install_Init( HWND hwndParent, BOOL fFirstCall, BOOL fPreviouslyInstalled, LPCTSTR pszInstallDir ) { if (!fFirstCall || ::MessageBoxW(0, Message, _T("SplashScreenSample") , MB_YESNO) == IDYES) return codeINSTALL_INIT_CONTINUE; else return codeINSTALL_INIT_CANCEL; } So I want to change this to something that can scroll. Can I use like a panel control since I know what has scroll or something else? Thanks

    Read the article

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >