Search Results

Search found 17808 results on 713 pages for 'installation package'.

Page 587/713 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

  • My desktop has started overheating -- how hot is hot?

    - by Jerry
    I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

    Read the article

  • Can't install PHP after apt-get dist-upgrade

    - by WASD42
    I had a server with perfectly running for months classical LAMP installation on Ubuntu 8.04: Linux localhost 2.6.24-23-generic #1 SMP Wed Apr 1 21:47:28 UTC 2009 i686 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=8.04 DISTRIB_CODENAME=hardy DISTRIB_DESCRIPTION="Ubuntu 8.04.4 LTS" Don't know why I've started apt-get update, apt-get upgrade but everything ended with apt-get dist-upgrade :) Everything gone alright... But now I can't start nor Apache, nor PHP, because PHP was simply deleted. When I'm trying to install it: > apt-get install php5 <...> The following packages have unmet dependencies: php5: Depends: libapache2-mod-php5 (>= 5.2.4-2ubuntu5.17) but it is not going to be installed or php5-cgi (>= 5.2.4-2ubuntu5.17) but it is not going to be installed E: Broken packages When I'm trying to install libapache2-mod-php5: The following packages have unmet dependencies: libapache2-mod-php5: Depends: php5-common (= 5.2.4-2ubuntu5.17) but 5.3.6-6~dotdeb.1 is to be installed E: Broken packages I don't know what 5.3.6-6~dotdeb.1 is and where is this package, because I've already removed dotdeb repository from APT sources :/ Tried to do apt-get update, apt-get upgrade, apt-get install php5 php5-common php5-cli with no success... Don't know what to try next :(

    Read the article

  • samba "username map" stopped to work

    - by Kris_R
    It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

    Read the article

  • Openldap with ppolicy

    - by nitins
    We have working installation of OpenLDAP version 2.4 which is using shadowAccount attributes. I want to enable ppolicy overlays. I have gone through the steps provided at OpenLDAP and ppolicy howto. I have made the changes to slapd.conf and imported the password policy. On restart OpenLDAP is working fine and I can see the password policy when I do a ldapsearch. The user object looks like given below. # extended LDIF # # LDAPv3 # base <dc=xxxxx,dc=in> with scope subtree # filter: uid=testuser # requesting: ALL # # testuser, People, xxxxxx.in dn: uid=testuser,ou=People,dc=xxxxx,dc=in uid: testuser cn: testuser objectClass: account objectClass: posixAccount objectClass: top objectClass: shadowAccount shadowMax: 90 shadowWarning: 7 loginShell: /bin/bash uidNumber: 569 gidNumber: 1005 homeDirectory: /data/testuser userPassword:: xxxxxxxxxxxxx shadowLastChange: 15079 The password policy is given below. # default, policies, xxxxxx.in dn: cn=default,ou=policies,dc=xxxxxx,dc=in objectClass: top objectClass: device objectClass: pwdPolicy cn: default pwdAttribute: userPassword pwdMaxAge: 7776002 pwdExpireWarning: 432000 pwdInHistory: 0 pwdCheckQuality: 1 pwdMinLength: 8 pwdMaxFailure: 5 pwdLockout: TRUE pwdLockoutDuration: 900 pwdGraceAuthNLimit: 0 pwdFailureCountInterval: 0 pwdMustChange: TRUE pwdAllowUserChange: TRUE pwdSafeModify: FALSE I do not what should be done after this. How can the shadowAccount attributes be replaced with the password policy.

    Read the article

  • How to repair Mac OS X without reinstalling?

    - by RahulVyas
    I have an Intel PC. I have installed iDeneb Mac OS X in my PC. It's running fine. After that I thought about installing Snow Leopard for running the iPad SDK. So I bought a retail Snow Leopard and booted it with Rebel EFI boot loader. When I was installing Snow Leopard, at the end of installation, setup gives an error. So I restarted my PC and boot with Rebel and I saw that the Mac was there so I booted that into safe mode and Mac OS X runs. After that I installed iPad SDK. But when I try to create an application, Xcode is not responsive. It hangs when I choose new project, give it a name and save it on disk. After just as I gave name and choose save it hangs. Is there any way I can repair my Mac OS X without reinstalling? I have also been unable to boot into normal mode and also without Rebel CD. So I want to boot without Rebel CD and also want to run iPad SDK.

    Read the article

  • Upgrade Nokia Maps from v2 to v3 fails

    - by ssollinger
    I'm trying to install Nokia Maps 3.0 on my Nokia N82, without much success. I believe other similar Nokia phones have the same problem. My phone is connected through USB in "PC Suite" mode, and the latest firmware available for N82 is installed. I currently have Maps 2.0 installed. I'm installing from a Windows XP PC, and tried the update first from within Ovi Suite (latest version) and from Nokia Maps Updater (latest version). In both cases it detects that there is an update available (Maps 3.0), downlowds it and starts the install. On my phone, I then get the following error message: Unable to install. Component is built in. And on the PC I get the error Error Cannot update maps application. The installation failed or was cancelled on the phone (18). I found an entry for Maps in the App. manager and deleted it (and turned phone off and on again afterwards), but this didn't make any difference (and I don't think it changed the version of Maps installed either). This is the release version of Maps 3.0, not the beta. I found the problem mentioned many times on various web sites, but couldn't find a solution anywhere. Has anybody any ideas how to get the upgrade from Maps 2.0 to Maps 3.0 to work?

    Read the article

  • How do you automatically close 3rd party applications when LiberKey is shut down?

    - by NoCatharsis
    Within LiberKey, I have added my own portable applications that are not included within the LiberKey library. When you go into the Properties menu for the app in the LiberKey UI, the Advanced tab has an option for Autoexecute. This dropdown menu seems to have no visible effect, at least on my current installation. I found that I could right click within the primary GUI and select "Add software group", add all 3rd party applications, then go to the Advanced tab within THAT Properties screen and select Autoexecute - "Always on startup". This solved the problem for starting the apps when LiberKey starts. However, now I'm having the same issue when closing out LiberKey. I have created a new 3rd party app that calls the same .exe, but sends the Parameter "/close". I then went to the Advanced tab and selected Autoexecute - "Always on shutdown". Seems pretty logical right? But the apps will not close on LiberKey shutdown. I cannot handle the app close-outs in the same way with a software group, as I did with the startup issue because the Autoexecute drop-down does not have an "Always on shutdown" option. Unfortunately, many of the Q&A forums on liberkey.com are in French and I took Spanish in high school. Otherwise I've not been able to find a workable answer. Any suggestions?

    Read the article

  • Can't make Dovecot communicate with Postfix using SASL (warning: SASL: Connect to private/auth failed: No such file or directory)

    - by Fred Rocha
    Solved. I will leave this as a reference to other people, as I have seen this error reported often enough on line. I had to change the path smtpd_sasl_path = private/auth in my /etc/postfix/main.cf to relative, instead of absolute. This is because in Debian Postfix runs chrooted (and how does this affect the path structure?! Anyone?) -- I am trying to get Dovecot to communicate with Postfix for SMTP support via SASL. the master plan is to be able to host multiple e-mail accounts on my (Debian Lenny 64 bits) server, using virtual users. Whenever I test my current configuration, by running telnet server-IP smtp I get the following error on mail.log warning: SASL: Connect to /var/spool/postfix/private/auth failed: No such file or directory Now, Dovecot is supposed to create the auth socket file, yet it doesn't. I have given the right privileges to the directory private, and even tried creating a auth file manually. The output of postconf -a is cyrus dovecot Am I correct in assuming from this that the package was compiled with SASL support? My dovecot.conf also holds client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } I have tried every solution out there, and am pretty much desperate after a full day of struggling with the issue. Can anybody help me, pretty please?

    Read the article

  • Windows XP restarting repeatedly after a fresh restore

    - by DWilliams
    I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

    Read the article

  • Toshiba External Hard Drive freezes computer

    - by Ephraim
    I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

    Read the article

  • Installing Trac on Windows under Apache 2.2?

    - by Warren P
    Trac is a python-powered bug-tracking and project-management app. According to Trac's wiki, there are several options for installing Trac, a standalone server (tracd), or under a dedicated webserver using one of these options: FastCGI - Not available on windows. mod_wsgi - No version of mod_wsgi available for Apache 2.2.22 and Python 2.7.3-amd64 that actually runs on my system! mod_python - no longer recommended, as mod_python is not actively maintained anymore) CGI -should not be used, as the performance is far from optimal) That leaves me with zero ways to run Trac on Windows. Apache 2.2.22 with ModWSGI loading, crashes the Apache2.2 service on startup without any error logs. Disabling the line in the apache configuration to load mod_wsgi restores sanity. I just want an installation of Trac on windows with Authentication enabled. I am unable to get authenetication to work using basic tracd like this: tracd -p 8000 --basic-auth="c:\tmp,c:\tmp\Passwords.md5.txt,mycompany" c:\tmp\RootFolder And I am unable to get Mod_WSGI installed. I'm going to keep trying to figure out a combination that works, I suspect I should have installed 32 bit python instead of 64 bit python, to start with. Did I do wrong to install Python 64 bit 2.7.3? I tried again with all 32 bit components, and still can't get MOD_WSGI to work with apache 2.2.22. I'm going to try to compile mod_wsgi myself with Visual C++ Express 2010, but it seems to me that it ought to be easier than this to get Trac running on windows, with authentication. Is there a way to run Trac on Windows, under Apache, with authentication? The last "Trac on windows" article died in 2008, leaving only this internet archive link for "Trac on windows" setup.

    Read the article

  • Windows 8, IIS8 how to make PHP imagick work

    - by Laci K
    I'm new to IIS server before IIS for 6 years I used Apache 2.X and with Apache imageMagick and its PHP module imagick worked just fine even with x64 version of PHP and Apache 2.4 and imageMagick. I tried to make imagick to work with IIS8 but it wont work. I always get the typical PHP startup warning in my log PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\iis express\PHP\v5.4\ext\php_imagick.dll' - %1 is not a valid Win32 application. in Unknown on line 0 And the next thing why is IIS loading php from IIS express folder if I have php in the program files? But actually I dont care until it works :) So what I did so far I unistalled imageMagick 6.7.X 64bit version and installed the latest x86 version, tested it in command line and it worked, than I looked up on net the latest imagick DLL which was I think the 3.1.0RC2 (founded here http://www.peewit.fr/imagick/) than I copied the dll to PHP's ext folder than edited php.ini and added the imagick to the dynamic extensions after that I restarted IIS and than nothing :( I got the error which I wrote earlier. Today I installed PEAR package Installer because I read somewhere that someone made it work with it but he also mentioned, that he needed to comply wincache too. Isn't there any easier solutions to make it work? Could someone maybe write me a step by step guide how to make this work.

    Read the article

  • Error in Apache: /var/run/apache2 not found

    - by Julen
    This is more self-answered question but since it drove me crazy I would like to share with the community and maybe someone can tell me why it happened or what it caused. The thing is I wanted to install in my Ubuntu 10.4 machine a CGI app, one built in the samples that come with the gSOAP toolkit. My intention was to access those from ASP .NET machine. Regular Ubuntu does not come with Apache so I install it from Sypnatic. Pretty easy. I followed this How to Install Apache2 webserver with PHP,CGI and Perl Support in Ubuntu Server. Instead of apache.conf I tweaked httpd.conf since a college here used that file instead of the first to put his Apache running. Besides I was able to access his CGI from my ASP .NET but mysteriously I could not from mine, I was getting always "The request failed with HTTP status 503: Service Temporarily Unavailable". Checking Apache error.log I found these messages: No such file or directory: unable to connect to cgi daemon after multiple tries: /home/julen/htdocs/cgi-bin/calcserver And looking more carefully whenever I restarted Apache I got this other message No such file or directory: Couldn't bind unix domain socket /var/run/apache2/cgisock. cgid daemon failed to initialize I am pretty new with Ubuntu and I could not think that Apache and Synaptic made a mistake in the installation process of the server, but it is true that the /var/run/apache2 was missing whereas in my college's computer was not. I tried to find and "elegant" solution but I found a post from 2006 that had an slight reference to it. Finally I decided to create the folder myself (as root) and then everything worked fine. Hope this helps others if they encounter a similar problem. Still I have the doubt why the folders was not created in the first place. Best, Julen.

    Read the article

  • Acer recovering windows vista

    - by Charlie Pigarelli
    My computer history is very long even of my computer has 4 years of life. An year ago I installed Windows 7 on this acer m1610 that had Vista before. My technic left me 2 recovery disc for "acer vista" before updating it to Windows 7. Then the computer had some trouble. The graphic card broke and we decided to use another computer. Yesterday I had the great idea to fuse the two computer to have a better one... So I moved the graphic card of the latter computer to the acer and everything gone well. Then the trouble of speed, it had before, come back. So I decided to reinstall the very first Windows: Vista back again. I booted the computer with those 2 DVD-R my technic left me and at the end of the process it asked me to insert "the backup cd number one or the system disk". I found 2 original Acer "Blank Recovery Disc" DVD-R and tried with those: rejected. Tried with empty DVD-+R: rejected. I tried with CDs: rejected. I don't have any system disc with me. Except for those 2 DVD-R my technic left me. What am I supposed to do now? I even tried with these fantomatic alt+f9/f10 that should start the recovery without any disc... But nothing happened. PS: the installation cannot complete if I do not insert the right disk. (The recovery disc uses Acer eRecovery Management as recovery software.

    Read the article

  • Need help with MS Access 07 & Reports

    - by Moe
    Hey there, I'm finding it difficult to get MS reporting working to what I'd like to show. What I'm trying to do is: a) In my database store a URL file (HTTP external file), that is a .jpeg. I'd like to use that URL to call the image on the report sheet. I have tried to use 'Control source' on the data panel, but with no success. Any way I can get Dynamic Images to show up on each database. Also, I have a couple of Relational Databases. One Defines Values: For Example: DefinePets('petID','Name of Pet') The other one links the Main DB with the 'DefinePets' database. Eg: connect('petID','mainID','extraFeild') I'd like my report to Go into the "connect" Table, where the the currently viewed Record Value = mainID, then find petID and return Name of Pet. There is a many to many link between definePets and the main Table. (Therefore connect is joining them up) Or is that too much to ask from a simple package like Access? Thanks.

    Read the article

  • Trying to setup catchall mail forwarding on my rackspace's cloudspace server

    - by bob_cobb
    I'm running Ubuntu 12 Precise Pangolin and am trying to configure my server to catchall mail sent to it and forward it to my gmail address. I've been trying lots of examples online like editing my main.cf file which looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = destiny alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = destiny, localhost.localdomain, localhost relayhost = smtp.sendgrid.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 51200000 recipient_delimiter = + inet_interfaces = all inet_protocols = all In my /etc/postfix/virtual I have: @mydomain.com [email protected] @myotherdomain.com [email protected] Which isn't working when I email [email protected] or [email protected]. So I got the recommendation to add the following to my /etc/alias: postmaster:root root:[email protected] restarted postfix, and tried emailing [email protected] or [email protected] but it still won't send. Does anyone have any idea what I'm doing wrong here? I'd appreciate any help.

    Read the article

  • Ubuntu 11.10 ATI Drivers vesa park

    - by Matthias
    This is probably not an issue, from all I can get it seems my hardware and drivers are properly installed. However when I go to system settings - system info - graphics. I get Driver: VESA:PARK. Experience: Standard. my graphics card is a: Ati Mobility Radeon HD 5470 512MB. I am pretty sure it's not a same-die GPU since there is a fan exhaust at the side of my laptop which I presume is the exhaust for the GPU... I have no clue whatsoever what this means. I installed the ati drivers first using the 'additional drivers' method. However I also decided to look a manual installation up via the terminal since I've had problems before with Ubuntu and ati cards. I used wget and something among the lines of sh dpkg -i. I can recall exactly, I took them from another stackoverflow answer. Anyway, it seems everything is installed properly since it shows up with these commands: sudo lshw -C video fglrxinfo however the first command seems to detect hardware, not the driver per se, although the driver is probably needed to detect the hardware anyway which would indicate its properly installed. I am still not sure about that VES:PARK thing though. I'd like to know what it means.. Also, if someone happens to know a good way of testing if the gpu is connected/being used...some sort of benchmark maybe...I'd like to hear it. P.s. I can find my way around in Ubuntu but I would probably still be considered a rookie by more experienced users.

    Read the article

  • Cannot build digiKam

    - by Tichomir Mitkov
    I'm trying to compile digiKam 2.8.0. I have installed the required libraries but cMake seems to stuck without any meaningful reason. Here is the output of cMake: $ cmake -DCMAKE_BUILD_TYPE=relwithdebinfo -DCMAKE_INSTALL_PREFIX=/usr/local . -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Found KDE 4.6 include dir: /usr/include -- Found KDE 4.6 library dir: /usr/lib64 -- Found the KDE4 kconfig_compiler preprocessor: /usr/bin/kconfig_compiler -- Found automoc4: /usr/bin/automoc4 -- Local kdegraphics libraries will be compiled... YES -- Handbooks will be compiled..................... YES -- Extract translations files..................... NO -- Translations will be compiled.................. YES -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libmediawiki ----------------------------------------------------------------------------- -- The following external packages were located on your system. -- This installation will have the extra features provided by these packages. ----------------------------------------------------------------------------- * QJSON - Qt library for handling JSON data ----------------------------------------------------------------------------- -- Congratulations! All external packages have been found. ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkgeomap -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- kexiv2 found, the demo application will be compiled. -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: libkface -- Found Qt-Version 4.7.1 (using /usr/bin/qmake) -- Found X11: /usr/lib64/libX11.so -- First try at finding OpenCV... -- Great, found OpenCV on the first try. -- OpenCV Root directory is /usr/share/opencv -- External libface was not found, use internal version instead... -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: kipi-plugins -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): extra/kipi-plugins/CMakeLists.txt:123 (FIND_PACKAGE) -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi CMake Warning at extra/kipi-plugins/CMakeLists.txt:139 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- Found GObject libraries: /usr/lib64/libgobject-2.0.so;/usr/lib64/libgmodule-2.0.so;/usr/lib64/libgthread-2.0.so;/usr/lib64/libglib-2.0.so -- Found GObject includes : /usr/include/glib-2.0/gobject -- Check for Ksane library in local sub-folder... -- Found Ksane library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libksane -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- Check Mediawiki library in local sub-folder... -- Found Mediawiki library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libmediawiki -- Check Vkontakte library in local sub-folder... -- Found Vkontakte library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkvkontakte -- Boost version: 1.38.0 -- libkgeomap: Found version 2.0.0 -- Found X11: /usr/lib64/libX11.so -- CMake version: cmake version 2.8.9 -- CMake version (cleaned): cmake version 2.8.9 -- -- ---------------------------------------------------------------------------------- -- kipi-plugins 2.8.0 dependencies results <http://www.digikam.org> -- -- libjpeg library found.................... YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libxml2 library found.................... YES (optional) -- libxslt library found.................... YES (optional) -- libexpat library found................... YES (optional) -- native threads support library found..... YES (optional) -- libopengl library found.................. YES (optional) -- Qt4 OpenGL module found.................. YES -- libopencv library found.................. YES (optional) -- QJson library found...................... YES (optional) -- libgpod library found.................... YES (optional) -- Gdk library found........................ YES (optional) -- libkdepim library found.................. YES (optional) -- qca2 library found....................... YES (optional) -- libkgeomap library found................. YES (optional) -- libmediawiki library found............... YES (optional) -- libkvkontakte library found.............. YES (optional) -- boost library found...................... YES (optional) -- OpenMP library found..................... YES (optional) -- libX11 library found..................... YES (optional) -- libksane library found................... YES (optional) -- -- kipi-plugins will be compiled............ YES -- Shwup will be compiled................... YES (optional) -- YandexFotki will be compiled............. YES (optional) -- HtmlExport will be compiled.............. YES (optional) -- AdvancedSlideshow will be compiled....... YES (optional) -- ImageViewer will be compiled............. YES (optional) -- AcquireImages will be compiled........... YES (optional) -- DNGConverter will be compiled............ YES (optional) -- RemoveRedEyes will be compiled........... YES (optional) -- Debian Screenshots will be compiled...... YES (optional) -- Facebook will be compiled................ YES (optional) -- Imgur will be compiled................... YES (optional) -- VKontakte will be compiled............... YES (optional) -- IpodExport will be compiled.............. YES (optional) -- Calendar will be compiled................ YES (optional) -- GPSSync will be compiled................. YES (optional) -- Mediawiki will be compiled............... YES (optional) -- Panorama will be compiled................ YES (optional) -- ---------------------------------------------------------------------------------- -- -- ---------------------------------------------------------------------------------- -- Starting CMake configuration for: digiKam -- Check for Kdcraw library in local sub-folder... -- Found Kdcraw library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. Call Stack (most recent call first): core/CMakeLists.txt:156 (FIND_PACKAGE) -- Check Kexiv2 library in local sub-folder... -- Found Kexiv2 library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkexiv2 -- Check Kipi library in local sub-folder... -- Found Kipi library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkipi -- Check Kface library in local sub-folder... -- Found Kface library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkface -- Check for KGeoMap library in local sub-folder... -- Found KGeoMap library in local sub-folder: /home/tichomir/Downloads/digikam-2.8.0/extra/libkgeomap -- PGF_INCLUDE_DIRS = /usr/local/include/libpgf -- PGF_INCLUDEDIR = /usr/local/include/libpgf -- PGF_LIBRARIES = pgf -- PGF_LDFLAGS = -L/usr/local/lib;-lpgf -- PGF_CFLAGS = -I/usr/local/include/libpgf -- PGF_VERSION = 6.12.24 -- PGF_CODEC_VERSION_ID = 61224 -- Could NOT find any working clapack installation -- Boost version: 1.38.0 -- Check for LCMS1 availability... -- Found LCMS1: /usr/lib64/liblcms.so /usr/include -- Paralelized PGF codec disabled... -- Identified libjpeg version: 62 -- Found MySQL server executable at: /usr/sbin/mysqld -- Found MySQL install_db executable at: /usr/bin/mysql_install_db CMake Warning at core/CMakeLists.txt:310 (MESSAGE): libkdcraw: Version information not found, your version is probably too old. -- libkgeomap: Found version 2.0.0 -- Found gphoto2: -L/usr/lib64 -lgphoto2_port;-L/usr/lib64 -lgphoto2 -lgphoto2_port -lm -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- WARNING: you are using the obsolete 'PKGCONFIG' macro, use FindPkgConfig -- PKGCONFIG() indicates that lqr-1 is not installed (install the package which contains lqr-1.pc if you want to support this feature) -- Could NOT find Lqr-1 (missing: LQR-1_INCLUDE_DIRS LQR-1_LIBRARIES) -- Found SharedDesktopOntologies: /usr/share/ontology -- Found SharedDesktopOntologies: /usr/share/ontology (found version "0.5.0", required is "0.2") -- -- ---------------------------------------------------------------------------------- -- digiKam 2.8.0 dependencies results <http://www.digikam.org> -- -- Qt4 SQL module found..................... YES -- MySQL Server found....................... YES -- MySQL install_db tool found.............. YES -- libtiff library found.................... YES -- libpng library found..................... YES -- libjasper library found.................. YES -- liblcms library found.................... YES -- Boost Graph library found................ YES -- libkipi library found.................... YES -- libkexiv2 library found.................. YES -- libkdcraw library found.................. YES -- libkface library found................... YES -- libkgeomap library found................. YES -- libpgf library found..................... YES (optional) -- libclapack library found................. NO (optional - internal version used instead) -- libgphoto2 and libusb libraries found.... YES (optional) -- libkdepimlibs library found.............. YES (optional) -- Nepomuk libraries found.................. YES (optional) -- libglib2 library found................... YES (optional) -- liblqr-1 library found................... NO (optional - internal version used instead) -- liblensfun library found................. YES (optional) -- Doxygen found............................ YES (optional) -- digiKam can be compiled.................. YES -- ---------------------------------------------------------------------------------- -- -- Adjusting compilation flags for GCC version ( 4.5.1 ) -- Configuring incomplete, errors occurred! Actually this line shows a sign of error CMake Error at extra/libkdcraw/cmake/modules/FindKdcraw.cmake:137 (file): file Internal CMake error when trying to open file: /home/tichomir/Downloads/digikam-2.8.0/extra/libkdcraw/libkdcraw/version.h for reading. 'version.h' doesn't exists instead there is a file 'version.h.cmake' I have installed libkdcraw (64-bit) from sources. I'm using OpenSuse

    Read the article

  • How to serve Rails application with Passenger/Apache without domain name?

    - by grifaton
    I am trying to serve a Rails application using Passenger and Apache on a Ubuntu server. The Passenger installation instructions say I should add the following to my Apache configuration file - I assume this is /etc/apache2/httpd.conf. <VirtualHost *:80> ServerName www.yourhost.com DocumentRoot /somewhere/public # <-- be sure to point to 'public'! <Directory /somewhere/public> AllowOverride all # <-- relax Apache security settings Options -MultiViews # <-- MultiViews must be turned off </Directory> </VirtualHost> However, I do not yet have a domain pointing at my server, so I'm not sure what I should put for the ServerName parameter. I have tried the IP address, but when I do that, restarting Apache gives apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sun Jan 17 12:49:26 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Sun Jan 17 12:49:36 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results and pointing the browser at the IP address gives a 500 Internal Server Error. The closest I have got to something sensible is with <VirtualHost efate:80> ServerName efate DocumentRoot /root/jpf/public <Directory /root/jpf/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> where "efate" is my server's host name. But now pointing my browser at the server's IP address just gives a page saying "It works!" - presumably this is a default page, but I'm not sure where this is being served from. I might be wrong in thinking that the reason I have been unable to get this to work is related to not having a domain name. This is the first time I have used Apache directly - any help would be most gratefully received!

    Read the article

  • Question about Displaying Documents and the CQWP in MOSS 2007

    - by Psycho Bob
    My organization is in the process of converting our intranet over to a SharePoint solution. Part of this intranet will be the movement and organization of all our internal documents. Currently, we have 11 pages of document links, each with its own subheadings. So far I have it set where each document has a custom field called "Page" with a check box list of all the document pages on the intranet site. On each individual page, I have setup a Content Query Web Part that displays the documents that have the corresponding Page value set (i.e. if a document Page value has been checked for "HR" it will appear on the HR page). The goal of this setup is to allow the nontechnical personal who will be responsible for the maintenance of the documents to be able to upload new documents to the documents list and note on which pages they should appear on without having to manually update the pages themselves. The problem that I am having is that I cannot seem to find a good way to sort the documents into their subheadings once they are on the appropriate page. I could create individual check boxes for each page/subheading combination, but this would create a list of approximately 50-75 items. Does anyone have any ideas as to how I could accomplish this, either via CQWP or by different means? Goals/Requirements of Installation Allow Intranet documents to be maintained by nontechnical personnel Display documents on the appropriate pages without user having to edit actual page or web part Denote document page location using user settable document attributes (if possible) Maintain current intranet organization and workflow Use only one document list without subdirectories NOTE: I am aware that this is not the most efficient or elegant way to do things, but these are the requirements I have been given for the project.

    Read the article

  • pgpoolAdmin keeps going straight back to it's login page

    - by user705142
    I'm trying to run pgpoolAdmin through nginx - it seems to be working properly, at least initially. I've gone through the initial set-up, which works fine, but now after logging in every link takes me straight back to the login page. It also shows japanese text instead of english, despite picking english in the installation. It seems to me just as if it was unable to save any user data, session information etc. I have javascript/cookies enabled, so it's not that. The ownership of the folder is nginx, and so too is pgmgt.conf.php, so it shouldn't be a problem with permissions. One potential issue is that I can't seem to see any confirmation that php postgresql support is enabled in the php info screen, despite the correct package installed and in the config line. Any ideas as to what's happening here? The nginx rules are pretty standard: server { # pg-pool admin listen 997; server_name localhost; root /opt/pgpooladmin; index index.php; location ~ .php$ { fastcgi_pass_header Set-Cookie; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_index index.php; include fastcgi_params; } }

    Read the article

  • Building a Media Center PC with Comcast Cable...?

    - by Rob
    Alright - so this might be a stupid question but I've never been all that much into TV. I currently have Comcast cable. I've just got the 'basic' 2-60 package or whatever; I've just always plugged the cable into the back of my TV. I've never had a cable box. Recently, Comcast has been pulling channels off of my line-up. Most recently, the stole the TV Guide channel from me. I'm told this is part of a push to get customers to switch to their digital line-up. But, I'm also told it requires some sort of digital receiver for each TV you've got. I don't want to buy a bunch of these digital receivers and I don't want to pay the monthly rental fee...but I have heard of how awesome media center PCs are and some really cool things they can do. And, I've got loads of PC parts sitting around. So, can someone guide me through this a bit? Are there computer video cards or TV tuners that are going to work with Comcast's digital cable? What kind of price range are we looking at?

    Read the article

  • samba "username map" stopped to work after upgrade to 3.6

    - by Kris_R
    It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

    Read the article

  • Nvidia Linux Driver Huge Resolution

    - by darxsys
    I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

    Read the article

  • Apache2 Segmentation fault with wsgi_module

    - by a coder
    Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

    Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >