Search Results

Search found 28789 results on 1152 pages for 'ubuntu netbook'.

Page 587/1152 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

  • How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

    - by Adam
    A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

    Read the article

  • Just installed 13.04 and everything is fine except I cannot connect to the internet. Any thoughts?

    - by razorccatu
    I just installed Ubuntu 13.04 on my HP G62 laptop and the install went smoothly. I did the install off of a USB drive after trying ubuntu. While I was testing it, I connected to my Wireless with out issue and surfed a little. After the install, no wireless. I can still connect to my wireless network (at least it tells me I'm connected at full strength) but No servers can be found. I attempted to ping Google to no avail and I attempted to ping my router to no avail. I tried to then hard wire the machine and once again it told me that I was connected but I was not. When I ran dmesg, I got the following message: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolvabe. Please install nss-hostname! Is the hostname the issue? if so, how do I resolve it with out internet connection? If it's not the issue, how do I move forward? Thanks for any help. EDIT. I forgot to attach the image of my ifconfig if that might help.

    Read the article

  • How to get a Toshiba L505 to boot USB or CD

    - by ShroudedCloud
    OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

    Read the article

  • HTC Android device mounted as USB drive is read-only unless I'm root

    - by Ian Dickinson
    When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

    Read the article

  • virtual install from ISO not getting virtual kernel

    - by Pete
    I have a KVM host (12.04.5) that I have been installing guests on in variety of ways. I just noticed recently one of my guests was running a generic kernel when I'm fairly certain I specified minimum virtual machine during install from a 12.04.2 server iso. From what I understand it should be running a stripped down kernel "optimized" for VMs. I set up another server to test, this time using a 14.04.1, and sure enough I ended up with uname -r returning 3.13.0-32-generic. It seems that if I use an .iso to install, I end up with generic regardless. However building with the vmbuilder ... --flavour virtual --suite precise ... (I don't have trusty available yet) script gives me an ubuntu 12.04.5 LTS system running kernel 3.2.0-67-virtual. The server FAQ mentions I should be getting the virtual kernel. What are practical advantages of using linux-image-virtual kernel? gives me the impression that it doesn't really matter functionally (in my case I only have a couple VMs running). I first thought was maybe I was somehow not applying the correct options because the installer F4 menu doesn't really give great feedback if the mode has been selected or not. Looking in the log /var/log/installers/syslog I see Command line: file=/cdrom/preceed/ubuntu-server-minimalvm.seed ... I know that I can install the virtual kernel package down the road, but why am I not, or should I be getting the virtual flavor of kernel from an ISO install when doing an minimum VM install?

    Read the article

  • Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

    - by oyse
    I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

    Read the article

  • Why is Desktop Unity using the global application menu?

    - by Kazade
    It was announced in another question that the desktop version of Unity will keep the global menu by default. Here are the facts: The global menu was introduced into UNE to save vertical screen space because at Netbook resolutions the vertical space is limited. On a modern desktop with a high resolution, there is ample vertical space making this unnecessary On the announcement of UNE global menus, Mark Shuttleworth himself said the following: "There are outstanding questions about the usability of a panel-hosted menu on much larger screens, where the window and the menu could be very far apart." The benefits of a global menu don't seem to carry across to a high-resolution desktop and instead seem to bring draw backs (increased mouse travel, large distance between the menu and its associated window). The other worrying factor is that applications seem to be moving away from having a menu bar, and instead of innovating on this and defining new guidelines for moving away from the menu, we are giving it prime place right at the top of the desktop. If applications continue moving away from the desktop we will have an inconsistent experience concerning where to locate application related options/tools depending on which app you are using (e.g. Chrome). Finally, the current global menu bar implementation doesn't work for all apps, and doesn't even work for all apps in the default install. This means that the default desktop implementation will be inconsistent. So, there are a bunch of reasons why moving to a global menu is a bad idea, so we need some pretty convincing arguments for why it is a good idea. What are the reasons for the global menu implementation in the desktop version of Unity?

    Read the article

  • Lots of static/crackling noises after ALSA HDA DKMS installation

    - by MartinB
    I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

    Read the article

  • Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

    - by AndyAtTheWebists
    I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

    Read the article

  • Unable to mount NTFS Partition after resizing

    - by sam
    I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

    Read the article

  • Unable to start VMWare Workstation after upgrade to 13.04

    - by pst007x
    After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

    Read the article

  • BCM2046B1 Bluetooth Dongle connection problem

    - by Andfoy
    Well i have a Blueooth dongle with an BCM2046 IC intrregated, my problem is that when i connect it, Ubuntu recognize it, but it don't work whe i try to scan or scan the PC from other device, i replaced the default Gnome Bluetooth manager and i installed Blueman, but the problem presists. The Bluetooth LED indicator appears to be "working". I'm using 11.10 Oneiric Ocelot hcitool dev: Devices: hci0 89:21:XX:XX:XX:XX lsusb: Bus 002 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 002 Device 004: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle hciconfig -a: hci0: Type: BR/EDR Bus: USB BD Address: 89:21:XX:XX:XX:XX ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1329 acl:0 sco:0 events:40 errors:0 TX bytes:671 acl:0 sco:0 commands:35 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x4a0100 Service Classes: Networking, Capturing, Telephony Device Class: Computer, Uncategorized HCI Version: 2.0 (0x3) Revision: 0x4000 LMP Version: 2.0 (0x3) Subversion: 0x430e Manufacturer: Broadcom Corporation (15) Sorry for my English and thanks for any hints.

    Read the article

  • How can I "diff" two files with Nautilus?

    - by bioShark
    I have installed Meld and found out it's a great comparing tool. Unfortunately there is no integration with Nautilus 3.2. This means, I can't right click on files and select an option to open them in Meld for comparison. I have seen in the tools comment that the tool need the diff-ext package to be installed. This package has been removed from Ubuntu universe, I am guessing because gtk 3.0. Even if I manually downloaded from source forge the diff-ext package, when I try to configure it the check fails with the message: checking for DIFF_EXT... configure: error: Package requirements (libnautilus-extension >= 2.14.0 gconf-2.0 >= 2.14.0 gnome-vfs-module-2.0 >= 2.14) were not met: No package 'libnautilus-extension' found No package 'gconf-2.0' found No package 'gnome-vfs-module-2.0' found Ok, so from this output I gather that indeed gtk 2 is being required to install the diff extension to nautilus. Now, my question is: Is there a possibility to integrate Meld into Nautilus? Or, are there any other diff based tool which integrate with current Nautilus? So gtk3 based. I am using Ubuntu 11.10 if there was any doubt so far. cheers and thanks in advance.

    Read the article

  • Encrypt SSD or not?

    - by JamesBradbury
    My desktop machine is running Ubuntu 12.04 (and will probably stay with it until the next LTS). I've got a new 120GB SSD on the way as my existing 420GB spinning disk. If it makes any difference I'll be dual-booting with Windows 7 across both disks too. I've read some helpful answers here about /home setup and enabling TRIM, which I intend to follow. So most of my /home will be on the SSD, with only photos, videos and music on the spinning disk. The question is, when I reinstall Ubuntu from CD or USB, whether I should encrypt the SSD? Specifically: I'm reading that drive wear isn't much of an issue with modern SSDs as they last decades even if you spam them. Is this true? How big a performance reduction will encrypting cause (I have an i7 Sandybridge, so I guess it can cope)? Is it more important from a security point of view to encrypt an SSD? I think I read somewhere that it may be hard to reliably wipe data. By all means answer even if you only know about one of those things.

    Read the article

  • ATI Radeon 5800 series dual monitor unity not 3D accelerated

    - by Victor S
    When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

    Read the article

  • Gigabyte u24f Touchpad (elantech) not detected

    - by user314973
    A new Ubuntu user here. I just installed Ubuntu 14.04 on my gigabyte U24F laptop. At first the touch-pad (I believe it's elantech) was working fine but one day I turned it off using fn+f10 key from the keyboard. The next day I could no longer turn it back on and it has since been undetected by the system. xinput returns Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Video Bus id=9 [slave keyboard (3)] ? Power Button id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] so there's no touch-pad detected. I'm using a USB mouse at the moment. Attempting to run synclient gives "Couldn't find synaptics properties. No synaptics driver loaded?" Things I've tried so far to no avail Reinstalling xserver-xorg-input-synaptics. Checking dconf.editor settings, touchpad is enabled. Booting into a live usb session, touchpad no longer even works in this case. (Does this mean a fresh install wouldn't even solve the problem?) Any help is greatly appreciated!

    Read the article

  • Software Center empty "No usefulness from server" "no username in config file"

    - by Theron G. Burrough
    I upgraded to 12.04 LTS and ran Software Center while a few things were running, and crashed. (2 GB RAM on a Netbook.) On reboot, Ubuntu One interface would not find any programs, neither installed (to run) nor available for download. So I launched Software Center, which opens, but does nothing. I click "Close" button and get a "Force Quit?" box. So I quit. Did research, learned to run Software Center from Terminal: 2012-04-29 23:14:36,978 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file Then tried the below without success: Reinstallation of software center: sudo apt-get install --reinstall software-center Didn't work. Found this in a post: remove the config file for software-center then log out and back in sudo rm -rf ~/.config/software-center Didn't work. Reinstalled Software Center with Synaptic Package Manager. Still no dice! And I am a Linux newbie, so I don't know where the Dickens that config file is. Help appreciated.

    Read the article

  • How do I get a Belkin F5D8053 wireless adapter working?

    - by disassembler
    I've tried getting my Belkin N Wireless adapter to work on Ubuntu many times with no luck at all. Each time I seem to arrive at a dead end. After some thorough searching of UbuntuForums and WifiDocs I've gathered some information and narrowed the problem down to an issue with the rtl819xU driver. Here's some info that may help: $ sudo lshw -C network *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:22:75:38:52:ac capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl819xU multicast=yes wireless=802.11b/g/n $ sudo lsmod Module Size Used by vesafb 13449 1 snd_ice1724 106559 2 snd_ice17xx_ak4xxx 13163 1 snd_ice1724 snd_ac97_codec 105614 1 snd_ice1724 ac97_bus 12642 1 snd_ac97_codec snd_ak4xxx_adda 18436 2 snd_ice1724,snd_ice17xx_ak4xxx snd_ak4114 14326 1 snd_ice1724 snd_pt2258 12986 1 snd_ice1724 snd_i2c 13831 2 snd_ice1724,snd_pt2258 snd_ak4113 14307 1 snd_ice1724 snd_pcm 80244 4 snd_ice1724,snd_ac97_codec,snd_ak4114,snd_ak4113 fglrx 2434640 121 snd_seq_midi 13132 0 snd_rawmidi 25269 2 snd_ice1724,snd_seq_midi binfmt_misc 13213 1 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event ppdev 12849 0 snd_timer 28659 2 snd_pcm,snd_seq snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq dcdbas 14054 0 r8192u_usb 297246 0 snd 55295 16 snd_ice1724,snd_ac97_codec,snd_ak4xxx_adda,snd_ak4114,snd_pt2258,snd_i2c,snd_ak4113,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd parport_pc 32111 1 snd_page_alloc 14073 1 snd_pcm shpchp 32345 0 lp 13349 0 parport 36746 3 ppdev,parport_pc,lp usbhid 41704 0 hid 77084 1 usbhid e100 40108 0 floppy 60032 0 $ sudo iwconfig wlan0 802.11b/g/n Mode:Managed Access Point: Not-Associated Bit Rate:1 Mb/s Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I'd like to know if 1) Is the driver is properly installed and recognized by Ubuntu? 2) What can I do to load the drivers properly and make use of the adapter? Thanks!

    Read the article

  • Windows Randomly Stop Accepting Input from Bluetooth Keyboard

    - by dragonmantank
    I've got a laptop running Ubuntu 11.10 with the most recent updates and an Apple Wireless Keyboard that syncs via bluetooth. The Ubuntu box is also a Synergy server, using QuickSynergy to run Synergy. I'm using xmodmap to swap the option and command keys, but nothing else. Throughout the day, windows that are long running will just stop accepting input. For example, I leave gnome-terminal up and running almost 24 hours a day. If it sits for a while, it just stops accepting input. It doesn't matter if I'm ssh'd into another machine or sitting on a local tty session, it just stops accepting input. If I open a new tab or window, those work fine. The 'broken' tabs stay broken. I'm also running Turpial (a Twitter client) which will do that same thing. I tend to use the arrow keys to navigate, and it just stops accepting input. Closing it and reopening it causes it to work fine. I don't seem to have the problem in Chrome, but I tend to open up new tabs when I go somewhere instead of using existing tabs. I've updated all the packages, rebooted, and the only thing that seems to cure it is if I type on the built-in keyboard, the window will start to accept text from the bluetooth keyboard (until it stops again). I don't think the keyboard is disassociating from the laptop because it can happen while I'm using the keyboard, it seems more linked with windows that I sit for a long time. As an example, I'm typing in Chrome with the bluetooth keyboard but I have a terminal window that won't accept input.

    Read the article

  • How to install custom c library?

    - by arijit
    I just wanted to add a c library to Ubuntu which was created by Harvard University for cs50 course. They provided instructions for how to install the library which is listed below. Debian, Ubuntu First become root, as with: sudo su - Then install the CS50 Library as follows: apt-get install gcc wget http://mirror.cs50.net/library/c/cs50-library-c-3.1.zip unzip cs50-library-c-3.1.zip rm -f cs50-library-c-3.1.zip cd cs50-library-c-3.1 gcc -c -ggdb -std=c99 cs50.c -o cs50.o ar rcs libcs50.a cs50.o chmod 0644 cs50.h libcs50.a mkdir -p /usr/local/include chmod 0755 /usr/local/include mv -f cs50.h /usr/local/include mkdir -p /usr/local/lib chmod 0755 /usr/local/lib mv -f libcs50.a /usr/local/lib cd .. rm -rf cs50-library-c-3.1 I did exactly as directed. But the compiler reported “Undefined reference to a function”--the function was Get String. So, I searched for a solution and found one. It said to use the -l switch. Now when I compile I use something like: gcc –o hello.c hello –lcs50 (I don’t remember the exact command.) However, I cannot use the make command, which is easier to use. I understand that there is some problem with linking the library. What is a good solution to this problem?

    Read the article

  • What is the target of Unity?

    - by burli
    First Unity was developed for Netbooks. But the Netbook Market is shrinking. Unity is not specialized for tablet pcs like Android 3, but it may work well with some specialized Apps for those devices. Unity is still nice for Notebooks with small displays, but there is no big advantage on the desktop compared with other desktop environments like Gnome 2/3 or KDE. So what's the point? My first suggenstion was a hybrid between tablet pc and a desktop, for example for a manager. He can plug the tablet in a docking station in his office and he can work at a normal desktop, whats not possible with iOS or Android. If he is in a meeting he can use it as a tablet to make notes, for example. Or if he is somewhere else outside the office or the company. Same for normal users. They can dock the tablet and use it like a normal desktop pc or they can lie on the couch and browse in the web, read a book or chat with friend. So, thats my suggestion. But what is the real plan for Unity or Ubuntu in general? I'm curious ;)

    Read the article

  • Fix for poor hd playback for 11.04 upwards

    - by mark kirby
    Hi guys ive seen loads of posts on this site about poor 720/1080p playback in recent ubuntu versions I had this problem and fixed it so I thought id share it with everyone.... 1 install mplayer 2 install smplayer frontend {in software center} 3 open smplayer 4 go to "OPTIONS" then "PREFRENCES" then "GENRAL" 5 if you have a nvidia card choose "OUTPUT DRIVER" and select "VDPAU" {for ATI or AMD choose xv (0 - ATI Radeon AVIVO video) I dont know if this will work as my card is nvidia but it should) 6 go to performance on the left hand side and set both local and streaming cache to 99999 (this may also fix dvd playback if you set that cache aswell} 7 check the box for "ALLOW HARD FRAME DROP" and set "LOOP FILTER" to skip only on HD 8 Set the "THREDS FOR DECODING OPTION TO THE NUMBER OF CORES YOUR CPU HAS IF YOU HAVE MORE THAN ONE CPU ADD UP ALL THE CORES FOR BEST PERFORMANCE" 9 Enjoy you HD movies again on ubuntu...... I have a pretty avrage machine heres my spec.... 2x Pentium 4 ht 3 ghz Stock dell power and motherboard GFORCE 310 HDMI 24 inch full HD tv as a monitor so any one with dule core cpu should have no problems getting this to work. hope this helps someone out.

    Read the article

  • Configure Unity Lenses and what they search

    - by Sindre
    I'm using Ubuntu 12.10. I've read about a lense (ppa:pydave/unity-lenses) that you can replace with the original files and folders lense, so you can search all your files. Instead of the current which only search used/recently used files and programs. I couldn't get this to work with 12.10, got a bunch of errors when I tried adding the ppa. I would like to set up a lens that can search all my files and folders (from all of my 3 hdd's), one that search through my videos (ability to specify which folders) and the same for music. So basically I would like to set up three specific lenses that each get a set of specified folders that they search through. If this is not possible, is there atleast a way to configure the current Files and Folders lense to ignore certain folders? I don't like when my dash shows files that I don't want to be shown. I should add that I'm completely new to Ubuntu and I apologize beforehand if this information could easily be found. But I wasn't able to find something like this. Edit: I found out how I can use the Privacy application to ignore what I want, so that's sorted now. Sorry for not researching it more. But my question regarding the lenses still stand. All help is greatly appreciated.

    Read the article

  • 12.04 disabling wireless via dbus does not work

    - by FlabbergastedPickle
    I am using a proprietary rt3652sta driver for my wireless card. It appears as a ra0 device on the 64-bit Ubuntu 12.04. According to the online documentation the following used to work definitely up to 10.04. dbus-send --system --type=method_call --dest=org.freedesktop.NetworkManager /org/freedesktop/NetworkManager org.freedesktop.DBus.Properties.Set string:org.freedesktop.NetworkManager string:WirelessEnabled variant:boolean:false This however has no effect on the aforesaid wireless card in 12.04. Also, rfkill does not work as it does not even list the wireless button (again, likely due to the wireless driver being proprietary): rfkill list It only lists the hci0 (bluetooth) one and one can block/unblock it accordingly but this has no effect on the wifi. ifup/down also does not work (AFAICT)... And this leaves me with disabling wireless through the network manager applet. However, trying to do so via dbus appears not to work and yet I would like to automate it via a script. Any ideas how I could find out the proper dbus structure for the call? Is this even possible in Ubuntu 12.04?

    Read the article

  • A terminal emulator for ex-Windows users

    - by Dan
    There are several things I would like to be better in Ubuntu Terminal Emulator. coloring, like in the source code Copy and paste keyboard shortcuts that I used all the time in Windows: Ctrl-C and Ctrl-V (Most of people here in Ubuntu use Ctrl+C and Ctrl+V keyboard shortcuts to copy and paste everywhere except the terminal! I think it's annoying for newcomers, and I don't worry about historical reasons) A feature to save all the output to log file UPDATE: Can the terminal be a powerful feature-full user-friendly tool like a modern IDE? The Linux user can spend 30% of time in the terminal. Programmers no longer code in a notepad. Can I see the history pane? Suggestions? Directory pane? Commands list? Search for words in an output? Contextual behavior? "Search in Google" for a mouse right-click. Tips and tricks learning? Time is money! Please, people, give me a link to the 21st - century terminal.

    Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >