Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 588/778 | < Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >

• How can I create bootable DOS usb stick?

  - by Grzenio

  I need to use this utility to change one of the parameters of my new WD hard drive: http://support.wdc.com/product/download.asp?groupid=609&sid=113&lang=en It has truly unreadable instructions: Extract wdidle3.exe onto a bootable medium (floppy, CD-RW, network drive, etc.). Boot the system with the hard drive to be updated to the medium where the update file was extracted to. Run the file by typing wdidle3.exe at the command prompt and press enter. I understand that this bootable medium should be some version of DOS? How can I make my USB stick a bootable medium compatible with this utility (I don't have a diskette drive)? I have Windows 7 and Debian Linux installed.

  Read the article

• cygwin rsync over ssh very slow

  - by Waleed Hamra

  I have 2 machines running Windows Xp SP3. I have cygwin installed on both, version 1.7. I have rsync and ssh installed on both, and configured using default settings as per ssh-host-config and ssh-user-config programs provided. I moved the public keys into their respective locations, and basically ssh is working fine. i began an rsync operation, using: rsync -av --delete --hard-links local_dir username@other_machine:/some_dir well... on both machines, the processor is running near idle, no heavy usage. I checked IO using process explorer on both machines, and that too is at normal levels (1~2 MB/s), so I can't see where the bottlenecks are, because network performance is aweful. I'm not going over 1MB/s... when a normal file copy using windows sharing achieves some ~10 MB/s.. What could be wrong?

  Read the article

• why this routing configuration does not work?

  - by avs099

  I have 2 VMs in HyperV role: first is RRAS - it has 2 interfaces (both manually configured, no DHCP): 192.168.1.110 - "external" one, connected to the router 192.168.10.2 - that's internal interface which other VMs will be using as well also I added VPN connection to our main server - and it gets 192.168.2.136 IP address in 192.168.2.XXX network. And IP route is create on the server as well for this interface. second VM is called KITCHENER. It only has 1 interface 192.168.10.99 / 255.255.255.0, with default gateway set to RRAS server - 192.168.10.2 QUESTION: how can I ping "main server" - 192.168.2.1 - from the KITCHENER server when RRAS server is connected to VPN? please see screenshots with ipconfig /all, route print and ping 192.168.2.1 commands. What needs to be done to get this working? all servers are Windows 2008 R2 if that matters.

  Read the article

• accessing files on a shared folder via IIS

  - by Darkcat Studios

  Im not sure if this suits stackexchange, serverfault or here... so i'll go with here for a start. I'm having issues setting up a network share to be accessed by IIS, all I need to do is read/write files on the Other server. We have 2 servers set up (Both 2008 R2 & IIS 7.5), one is the WEB server, which is externally accessible and NOT part of the domain. We also have an Intranet server which has no internet connectivity and is part of the domain. These 2 servers can talk to each other happily, I have the SQL server on the WEB server shared across to the intranet server so that the web content is editable from the intranet. I can share a folder on the web server (say, wwwroot/Images/) and connect to it from the intranet server, even have it as a mapped drive (but i know thats not going to work for IIS to access it), So there seems not to be a connectivity issue. I can also set up a Virtual folder in IIS on the Intranet server - this is where it gets annoying - I cant connect using pass-through authentication because there is no suitable user on the web server (which is not on the domain). If i set up a user on the web server, eg Intranet_USR, and give it appropriate rights to the folder, files and share, i can connect, but only view folder contents in IIS, not read, although that user has read privileges!! Any help much appreciated!

  Read the article

• where do i find the drivers for a F5D7000 Belkin wireless adapter?

  - by neubert

  So I plugged an F5D7000 Belkin desktop wireless adapter into my desktop. Here is a picture of it: I did a Google search and found the drivers. I installed the latest version - (F5D7000 - Driver - Version 8xxx), and the NIC is still unrecognized as per the next screenshot: Does anyone have any ideas on how to get this working? I'm running Windows XP SP3 32-bit. (I have taken a screenshot but without network connectivity I can't email it or post it anywhere and I don't have a USB stick.)

  Read the article

• Particle trajectory smoothing: where to do the simulation?

  - by nkint

  I have a particle system in which I have particles that are moving to a target and the new targets are received via network. The list of new target are some noisy coordinates of a moving target stored in the server that I want to smooth in the client. For doing the smoothing and the particle I wrote a simple particle engine with standard euler integration model. So, my pseudo code is something like that: # pseudo code class Particle: def update(): # do euler motion model integration: # if the distance to the target is more than a limit # add a new force to the accelleration # seeking the target, # and add the accelleration to velocity # and velocity to the position positionHistory.push_back(position); if history.length > historySize : history.pop_front() class ParticleEngine: particleById = dict() # an associative array # where the keys are the id # and particle istances are sotred as values # this method is called each time a new tcp packet is received and parsed def setNetTarget(int id, Vec2D new_target): particleById[id].setNewTarget(new_target) # this method is called each new frame def draw(): for p in particleById.values: p.update() beginVertex(LINE_STRIP) for v in p.positionHistory: vertex(v.x, v.y) endVertex() The new target that are arriving are noisy but setting some accelleration/velocity parameters let the particle to have a smoothed trajectories. But if a particle trajectory is a circle after a while the particle position converge to the center (a normal behaviour of euler integration model). So I decided to change the simulation and use some other interpolation (spline?) or smooth method (kalman filter?) between the targets. Something like: switch( INTERPOLATION_MODEL ): case EULER_MOTION: ... case HERMITE_INTERPOLATION: ... case SPLINE_INTERPOLATION: ... case KALMAN_FILTER_SMOOTHING: ... Now my question: where to write the motion simulation / trajectory interpolation? In the Particle? So I will have some Particle subclass like ParticleEuler, ParticleSpline, ParticleKalman, etc..? Or in the particle engine?

  Read the article

• What's static.ak.fbcdn.net that appears on the status bar of my browser everytime Facebook is loading?

  - by Maverick

  I find the message: "waiting for static.ak.fbcdn.net..." on the status bar of my browser everytime I load Facebook and many a times even while loading other websites. I searched on net and found out that static.ak.fbcdn.net stands for static akamai facebook content delivery network. I reckon that static.ak.fbcdn.net is the server URL from where Facebook delivers contents to our browser. Am I right? Can anyone elaborate? Also, why does the above mentioned message appear while loading other websites too?

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• Problem accessing MICROSOFT##SSEE database (Error: 18456, Severity: 14, State: 16.)

  - by Philipp Schmid

  After an unexpected server shutdown due to a power failure, I can no longer connect to the internal windows database MICROSOFT##SSEE which is hosting Central Admin for my SBS 2008 server. The log shows: Error: 18456, Severity: 14, State: 16. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. [CLIENT: <named pipe>] I've tried to connect using the SQL Management studio (connecting to .pipemssql$microsoft##sseesqlquery) but no luck. The SQL Server Configuration Manager doesn't show a entry for 'Protocols for MICROSOFT##SSEE' (but shows it for 2 other database hosted on the same SQL server 2005 Express edition. I have tried to restore the master.ldf and mastlog.log files from a backup, but the issue persists.

  Read the article

• Windows diagnostic tools

  - by Tathagata

  I just joined a small computer lab which basically uses all Windows boxes and a few Windows Sever 2003. Coming from a *nix background I am missing all the nice tools that we have for diagnosis and troubleshooting. My question is what are the safe, free (not terribly concerned if it is like beer or freedom -both acceptable) tools out there that Windows system admins use for their day to day troubleshooting (network, applications, servers etc). I am aware of the tools that come with Windows (and their limited capabilites) - so my query is with what do you fill in your arsenal? (may be a list of win versions of tools that come in standard linux distros)

  Read the article

• Managing self-updating Windows software in GPO-deployed packages

  - by Paul

  Being very new to Windows software distribution for a small network (<50 clients) I was wondering how software packages like Adobe's Reader or Java are handled. I can deploy them as MSIs via group policies just fine. But what happens when the client software detects updates? What are common ways to handle this? Disable the software's autoupdate feature? Redeploy when the admin detects a new version? Just fishing for knowledge, thanks for any hint.

  Read the article

• How can Facebook's session get mixed up because of NAT and/or Proxy

  - by Alex

  Have received some reports from a customer (a very large company) they reported issues from clients who are using Facebook. These clients claim that once in a while when they log in to Facebook they end up in someone else's session. I know that network is NATed then Proxied before getting to Facebook.com. Although I'm not able to explain how this issue can occur. Is it possible that the Proxy is not sending the right session back to the clients? How can they end up with someone else's session since Facebook is cookie based session?? Anyone seen this before?

  Read the article

• VMware - Watching multiple virtual machine screens

  - by mr.b

  Hi, I don't know even if I put the question right, but here's what I'd like to accomplish. I have avoided specifying exact Vmware virtualization product here because I'm not sure which one would be most suitable for the task at hand. I am developing an application that works in local network. This application has to run on several computers at the same time, and it's important to me, as a developer and tester, to see (literally) how it behaves at all times on all computers. Is there any way to connect to screens of virtual machines deployed on ESX, ESXi, Sever 2.0, or some other product, so that I can see something like grid of screens, say 4x4 or 6x4 or whatever number of scaled screens, at the same time? Ability to interact with screens directly from grid (by double-clicking a screen, for instance, and then getting full resolution screen) would be greatly appreciated, of course. I hope that someone understood what I meant here. :)

  Read the article

• One NIC going to sleep on Centos system

  - by sbleon

  I have two Dell boxes with two ethernet ports a piece. I have a cable directly connecting two of these ports, creating a tiny LAN with 10.3.3.x addresses. The other port on each box is hooked up to a switch and has a DHCP-supplied address to talk to the outside world. I've noticed that when scp'ing large files from one box to the other over the private LAN, the transfers sometimes stall. It appears that any other network activity on either box will cause the transfer to resume. Wake-on-LAN is disabled on all interfaces according to ethtool. What else could be causing these stalled transfers?

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• creating decision tree based troubleshooting documentation?

  - by Joseph

  We troubleshoot a lot of server and network issues and follow a loose set of steps on what to do in different cases. With more and more people and responsibility, the need for standardization is needed so we don't miss something. I know I could accomplish what I want using flowcharts, but I'd like to do something similar to a "Choose Your Own Adventure" style. I think this is pretty much the same as what support call centers seem to do. Are there any tools to make creating such documentation easier? I'm looking for a web based approach if possible.

  Read the article

• How can I configure Adobe Help so it doesn't chatter so much with Adobe's domain?

  - by Michael Prescott

  Adobe Help that came with Creative Suite 5 and/or Flash Builder Pro is constantly creating network traffic with an Adobe site, www.wip4.adobe.com In the Adobe Help application Preferences, I find that I can change the settings so that I must manually download updates, but apparently the application still likes to call home and chatter non-stop with www.wip4.adobe.com. I could use something like Little Snitch to block all this spyware-like behavior, but I'd really prefer to just change the application's behavior. Is there a hidden setting or configuration file to adjust this behavior to something more appropriate and polite?

  Read the article

• Gnome 3 - Unable to change date and time

  - by Chris Harris

  I am running Arch Linux with Gnome 3. Unfortunately, although my time and date settings in /etc/rc.conf show that HARDWARECLOCK='UTC' and TIMEZONE='America/LosAngeles'. I continue to get the timezone of Europe/London. If I try to change the date and time via the GUI. It requires root access. After authorizing root access, the date and time may be changed; however, after closing the GUI window, it automatically reverts back to the previous incorrect timezone. I am able to use pool.ntp.org in order to sync my time to the correct one; however, this works only for the current session and is not fixed. This solution is inconvenient since there is not always network access. What other solutions are available for this problem?

  Read the article

• Are there any command line utilities which can calculate and/or limit how fast a pipe is running?

  - by stsquad

  I'm doing some basic stress testing of a Linux kernel network IWF with netcat. The set-up is fairly simple. On the target side: nc -l -p 10000 > /dev/null And on my desktop I was running: cat /dev/urandom | nc 192.168.0.20 10000 I'm using urandom for some poor-mans fuzz testing. However I find that even at this rate I can break something quite quickly. EDIT So I've been playing with trickle to rate limit how fast I'm generating data: cat /dev/urandom | trickle -u 10 nc 192.168.0.20 10000 But it's hard to tell if this is working. What would be really useful is a the pv equivilent of trickle that can work with pipes.

  Read the article

• Hosting services on ubuntu server VM

  - by Trevor Hartman

  I've got OSX Server running on a macbook, and I'm looking to run an ubuntu server VM on it via Parallels. I'm thinking about hosting all my apache inside linux, and possibly some other services. I'm curious what a viable config would be, having not done this before. I need to do bridged network right? How do I direct web traffic to the VM instead of OSX? Haven't got my head wrapped around how this works yet so any help would be appreciated.

  Read the article

• System freezes for 5 seconds when seeking in or skipping to songs and videos

  - by pragmatick

  When I start playing a new video or MP3 or skip to a time when playing them, my system hangs for a couple of seconds. A restart solves this problem, but only for a while. It does not matter which player I use (VLC, Media Player, Winamp, Zoom Player), which media files or if they are located on a network drive or on the local hard drive. Everything else works flawlessly and after the playing has started, there are not problems - until I switch to another file. Additionally, when the Winamp playlist continues to the next song, the system does not hang. When I skip to the next song manually, the system hangs. I've been using Windows XP for years and consider myself a fairly professional windows user, but I have no idea what could cause this. Dual-core 2Ghz, 2GB RAM, Windows XP SP3, Audigy card with kxproject. Worked flawlessly for years. Would be glad if anyone could help.

  Read the article

• Exalogic Elastic Cloud Software (EECS) version 2.0.1 available

  - by JuergenKress

  We are pleased to announce that as of today (May 14, 2012) the Exalogic Elastic Cloud Software (EECS) version 2.0.1 has been made Generally Available. This release is the culmination of over two and a half years of engineering effort from an extended team spanning 18 product development organizations on three continents, and is the most powerful, sophisticated and comprehensive Exalogic Elastic Cloud Software release to date. With this new EECS release, Exalogic customers now have an ideal platform for not only high-performance and mission critical applications, but for standardization and consolidation of virtually all Oracle Fusion Middleware, Fusion Applications, Application Unlimited and Oracle GBU Applications. With the release of EECS 2.0.1, Exalogic is now capable of hosting multiple concurrent tenants, business applications and middleware deployments with fine-grained resource management, enterprise-grade security, unmatched manageability and extreme performance in a fully virtualized environment. The Exalogic Elastic Cloud Software 2.0.1 release brings important new technologies to the Exalogic platform: Exalogic is now capable of hosting multiple concurrent tenants, business applications and middleware deployments with fine-grained resource management, enterprise-grade security, unmatched manageabi! lity and extreme performance in a fully virtualized environment. Support for extremely high-performance x86 server virtualization via a highly optimized version of Oracle VM 3.x. A rich, fully integrated Infrastructure-as-a-Service management system called Exalogic Control which provides graphical, command line and Java interfaces that allows Cloud Users, or external systems, to create and manage users, virtual servers, virtual storage and virtual network resources. Webcast Series: Rethink Your Business Application Deployment Strategy Redefining the CRM and E-Commerce Experience with Oracle Exalogic, 7-Jun@10am PT & On-Demand: ‘The Road to a Cloud-Enabled, Infinitely Elastic Application Infrastructure’ (featuring Gartner Analysts). WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: ExaLogic Elastic Cloud,ExaLogic,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress,ExaLogic 2.0.1

  Read the article

• Asking for Credentials, when requesting shared folders on the server, regularly for domain users?

  - by MFH

  In our network, single domain controller, when some users (members of the domain) request shared folders on the server they are required to enter their credentials, the server is Windows Server 2008 R2, even checking to remember my credentials doesn't work, sometimes it shows this message: "The system has detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you", sometimes it shows different messages, when I try to recreate the case sometimes I failed, I searched Google for it, I didn't find useful results, some talk about kerberos, but we don't use kerberos, this keeps going each day or two, how to overcome this, I don't want these messages to appear to users?

  Read the article

• Are all SFP+ tranceivers usable for FEX between Nexus 5000 and Nexus 2000?

  - by Alain O'Dea

  I am looking at building a network with Nexus 5000 parent switches and Nexus 2000 fabric extenders. The mystery at the moment is what kind of SFP+ tranceivers are required for cross-connecting racks. Right now I am considering FET-10G, but I am not sure that 100m is long enough given the separation between racks is potentially very large since it is a rented rack environment. Are all SFP+ tranceivers usable for FEX between Nexus 5000 and Nexus 2000? Specifically, can SFP-10G-SR transceivers be used for longer distance FEX?

  Read the article

• How to build an outbound load balancer with linux?

  - by matnagel

  We have a small house in the countryside and there is no fixed broadband, so we had a mobile flatrate first, and for 2 people with 2 computers it was too slow, so now we have 2 flatrates for 2 client machines. So I pay 2 flatrates and have double bandwith theoretically. There is a local network in the house that connects everything. But when I am alone I wonder how I can use both connections at the same time. I want to build a solution where I can browse the web and page requests are spread between the 2 connections. I imagine there are expensive routers who can split the traffic between 2 lines. But is there a good way to do it with linux? The solution I am looking for will split the requests already for one page (multiple images, css files, javascrfipt files) between the two lines.

  Read the article

< Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >