Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 595/778 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

• How can you configure the uPnP server on windows home server?

  - by pschorf

  I'm currently helping my parents with their home network set up while I'm home. I have a Synology NAS device which supports a uPnP server. I have a few MPEG-4 movies stored on the box, and simply enabling the uPnP server on the NAS streamed the video to some devices they have, including their Xbox 360 and Samsung television. They have a windows home server (HP MediaSmart.) I put one of the movies in the "Videos" folder of the device, and enabled sharing. It shows up on the television, but when played it produces an "unsupported file type" error. I have all of the transcoding settings disabled on the Synology device, so it should be streaming the same file. Is there some additional configuration I need to perform on the home server unit?

  Read the article

• Debian, CentOS, Slackware, FreeBSD, OpenSolaris and Ubuntu Server Edition: Which one to use for an http web server?

  - by Ako

  I am going to install and administrate a virtual server for a small university. The server should run inside a virtual machine (VirtualBox OSE). It is only used in the university network and is invisible to the outside world. It should run Apache web server for PHP, MySQL and probably a mail server. I don't know which OS to use. Main criteria for choosing include ease of administration and updating, package management and performance. I wonder if anyone has any suggestions? And candidate OSs are: Debian, Ubuntu, CentOS, Slackware, FreeBSD, OpenSolaris. Add any other OS if you know any better alternatives.

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• How can I make a persistent ssh tunnel?

  - by Blacklight Shining

  I have a Mac laptop and would like to have a persistent ssh tunnel so I can always log in from outside the local network. I'm looking for something that will work when the server can't be reached initially (e.g. if I don't have an Internet connection when I boot it), and will automatically start the tunnel when possible. I've tried putting an @reboot autossh line in my crontab, but I've found that sessions started with autossh disconnect every so often, and autossh quits if the first attempt fails. My current workaround is a small script and a cronjob: # crontab /home/blackl/bin/script &! # script #!/bin/sh while true; do ssh -Ngn -R $some_port:localhost:22 $server; sleep 30; done; Is there a better way to do this, or will I just have to be happy with this for now?

  Read the article

• How do you avoid name similarities between your classes and the native ones?

  - by Oscar

  I just ran into an "interesting problem", which I would like your opinion about: I am developing a system and for many reasons (meaning: abstraction, technology independence, etc) we create our own types for exchanging information. For instance: if there is a method which is called SendEmail and is invoked by the business logic, it way have a parameter of type OurCompany.EMailMessage, which is an object which is completely technology independent and contains only "business relevant data" (for instance, no information abut head encoding). Inside the SendEmail function, we get this information from our EMailMEssage object and create a MailMessage (this one is technolgy specific) object so it can be sent over the network. As you can already notice, our class has a very similar name to the "native" language class. The problem is: this is exactly what they are, email messages, so it is hard to find another meaningful name for them. Do you have this problem often? How do you manage it? Edit: @mgkrebbs just commented about using fully qualified names. This is our current approach, but a little bit too verbose, IMHO. I would like something cleaner, if possible.

  Read the article

• connect to paltalk server using a proxy

  - by Navid

  Hi I want to use paltalk, which is a kind of chat software, but the ports that this applications uses are closed in my country. What I need to do is to use a proxy server. Unfortunately the software itself does not provide a proxy setting. I though it would be possible to run paltalk on an O.S. installed on a virtual machine (say virtualbox) and configure the network setting of virtual machine to direct all its traffic through a proxy on host Operating system, but I could not find a way to do so neither. can anyone please help me?

  Read the article

• DD-WRT Router Can't hold a connection after initial setup...

  - by AC

  Struggeling with my new DDWRT router (Buffalo WZR-HP-G300NH) configuration. I configured it using one machine while comparing the settings on my existing Linksys WRT54GL on another machine. To the best of my knowledge, I've set it up the same way as my Linksys, but DDWRT has so many other options. After configuring it, I plugged it into the modem, VOIP device & my network. I see the phones come back online. However after a few minutes, it seems I lose the outbound connection (phones die and I can't get out over HTTP). What's confusing me is it works for a few minutes, then it fails. No idea what to look for. Ideas?

  Read the article

• Oh snap! My RPi was upgraded to 512MB! Woo-hoo!

  - by hinkmond

  I ordered a Raspberry Pi Model B (256MB) over 4 months ago on backorder. When it finally came I saw it was upgraded to the new half a gig model! Woot! But, all was not perfect. Gary C. told me the shipped configuration of the new RPi models didn't have the right firmware for 512MB, and I had to upgrade the start.elf in the /boot directory to recognize all of the 512MB RAM. I did a "free" command, and sure enough saw only 240MB. Sadness. But, Gary gave me a copy of his start.elf which worked after some trail and error. For anyone ordering the new RPi Model B w/512MB, here are the steps to get you going with full 512MB RAM: sudo apt-get update --fix-missing sudo apt-get upgrade --fix-missing # NOTE: This step takes at least a couple hours on a # fast network wget https://raw.github.com/raspberrypi/firmware/\ 164b0fe2b3b56081c7510df93bc1440aebe45f7e/boot/\ arm496_start.elf sudo mv /boot/start.elf /boot/orig-start.elf sudo mv arm496_start.elf /boot/start.elf sudo reboot free total used free shared buffers cached Mem: 497768 210596 287172 0 16892 169624 -/+ buffers/cache: 24080 473688 Swap: 102396 0 102396 So of course this means... (drumroll) there is now 498MB available for the Java Embedded heap! java -Xmx400m -version java version "1.7.0_06" Java(TM) SE Embedded Runtime Environment (build 1.7.0_06-b24, headless) Java HotSpot(TM) Embedded Client VM (build 23.2-b09, mixed mode) Yeah, baby! Hinkmond

  Read the article

• What is the best solution for letting both Macs and PCs access digital images and videos on a networ

  - by Gertbert

  I'm looking for a simple way to share digital images and videos over a network to both Macs and PCs. I'm currently looking into three options: NAS, WD MyBook Mirror drives attached to a router, or an HP WHS product like the Data Vault. I'm looking for something easy to implement that allows for drive mirroring but also has good performance for both Macs and PCS. I've read that the HP WHS devices rebalance on their own schedules, making them useless for streaming video, and hope someone can definitively confirm or deny this as it's a dealbreaker if true. Any other suggestions are appreciated. Thanks!

  Read the article

• IoT: Wearables!

  - by Tori Wieldt

  Wearables are a subset of the Internet of Things that has gained a lot of attention. Wearables can monitor your infant's heartrate, open your front door, or warn you when someone's trying to hack your enterprise network. From Devoxx UK to Oracle OpenWorld to Devoxx4kids, everyone seems to be doing something with wearables.  In this video, John McLear introduces the NFC Ring. It can be used to unlock doors, mobile phones, transfer information and link people. The software for developers is open source, so get coding! If you are coming to JavaOne or Oracle OpenWorld, join us for Dress Code 2.0, a wearables meetup. Put on your best wearables gear and come hang out with the Oracle Applications User Experience team and friends at the OTN Lounge. We'll discuss the finer points of use cases, APIs, integrations, UX design, and fashion and style considerations for wearable tech development. There will be gifts for attendees sporting wearable tech, while supplies last. What: Dress Code 2.0: A Wearables Meetup When: Tuesday, 30-September-2014, 4-6 PM Where: OTN Lounge at Oracle OpenWorld IoT - Wearable Resources The IoT Community on Java.net Wearables in the World of Enterprise Applications? Yep. The Paradox of Wearable Technologies Conference: Wearable Sensors and Electronics (Santa Clara, USA) Devoxx4Kids Workshop for Youth: Wearable tech! (Mountain View, USA)

  Read the article

• How to prevent people taking software home?

  - by Robert MacLean

  Most companies I have worked at have had either a collection of disks or a network share with the installs of the commonly used software in them. This is to allow the IT dept and skilled users to install the software they need on their work machines very easily. However some users would see this as an opportunity to get "free" software for their home machines. I've seen the draconian approach of locking the machine down completely, but that does not work well (in my view - if you disagree feel free to comment on it) because You add so much extra work to IT Users get that big brother feeling So how do you find a way to prevent users from taking home software but still allowing them to install what they need? You can make the assumption that most of the users in the organisations I work in are smart enough to install software, I'm not worried about the tea lady here.

  Read the article

• No internet on some devices, still on WiFi

  - by Joost

  Ok, here's the situation. I live with 3 friends, and we often sit in the living room with laptops out. There's a WiFi router in the kitchen, and we have quite a stable connection. The issue, however, is this: sometimes, all of a sudden one of my friends loses internet connection. Even disconnecting/reconnecting to the WiFi network does not help. When we restart the router, though, it works like a charm again. The odd thing is, it happens just for this one Windows 7 laptop. We've switched routers (for a different reason) in the mean time, but the issue remained. This makes me suspect the laptop even more. I realise I've given little details, but I don't really know what to try/do. Any suggestions what it might be?

  Read the article

• My wireless has suddenly became disabled by hardware switch, BIOS, rfkill, fn+f8 do nothing

  - by cwwk

  I have a toshiba l655d-s5145. There is no physical toggle for the wireless, although the f8 key is supposed to do the trick. It doesn't. The wireless has been working since October, and suddenly, nothing. RFKILL reports that the wireless is hard blocked, but unblock wifi, unblock 0, unblock all do nothing. I inserted a usb dongle, and that is also disabled by hardware switch, although rfkill reports that it is neither hard nor soft blocked. My onboard wireless is 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) according to lspci. Lsmod reports that these drivers are loaded. rtl8192c_common 75767 1 rtl8192ce rtlwifi 110972 1 rtl8192ce I resorted to reformatting the drive and reinstalling, but that also did not work. In BIOS I restored system defaults as there is no specific entry for wifi. Before reinstalling a pure xubuntu I went into Unity and saw that the airplane mode was on and despite being toggled off, it returned to the on position. I'm not sure where to find airplane mode in Xubuntu. What else can I do? I need my wireless.

  Read the article

• How to install remote software NOT on a domain?

  - by Nicros

  I have a situation where some software (that I wrote) is going to be deployed on 60 laptops for an event. The laptops are all running windows 7, but there is no domain controller, and they will all be connected to a 192.168.x.x network using wifi. Is there any convenient way to push the software (consisting of an msi file) can be pushed out to all the laptops and installed? I looked at WMIC, but I think that requires machines be joined to a domain, as does Group Policy. The other alternative is Powershell, but I have literally 4 hours to do this and will have no time to figure out the right script. It's not the end of the world if it has to be done manually (I can find volunteers) but it would be nicer if it could be automated somehow.

  Read the article

• File property information (last write time and file size) in explorer out of date by hours over netw

  - by David L Morris

  An application is running on a windows XP prof machine picking up file from a network share from another windows machine. It detects that the file has been updated (by date and time or optionally file size) and reads it for any new data. Most of the time the last write time and file size, seems to be up to date. Occasionally, this information stops being updated, even though the file is growing (intermittently during the day) with appended content, so that the last write time and file size remain fixed at some arbitrary moment. This is visible in explorer, where it shows a fixed last write time on the reading machine. Just opening the file to edit it in notepad, immediately refreshes the file properties, and the other application picks up where it left of. The file location can't be changed, nor the location of the relevant applications. Any solutions to resolve this problem?

  Read the article

• Remote X-windows between new RHEL5 and old Solaris 8

  - by joshxdr

  I have a very small lab network with three boxes: a modern x86-based RHEL3 box, an x86-based RHEL5 box, and a 1998-vintage SPARC Ultra5 with Solaris 8. I can use ssh -X to run a program on the RHEL5 box and view the windows on the RHEL3 box. I believe this uses xauth and magic cookies?? I have followed the X-Windows HOWTO to set up xauth on the Solaris box, but so far no dice. I would like to be able to use the X-windows server on the RHEL3 box with a client program on the Solaris box (program running on Solaris host, windows appearing at Linux host). Is there a trick to this, or have I made a mistake following the instructions for setting up xauth and magic cookie?

  Read the article

• Why ping another inet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• Lightweight tool for viewing raw HTTP messages?

  - by rewbs

  Hi, I'm investigating differences in behaviour between a couple of Web servers. I need to see raw response data from the servers (i.e. before the response is de-chunked if it has "Transfer-Encoding:chunked" and before it is decompressed if it has "Content-Encoding:gzip"). I can find plenty of simple HTTP client that nearly do what I need (e.g. Poster, RESTClient), but they tend to decode the response one step too far. Network analysers like Wireshark give me what I need but are a bit heavyweight. Telnet is my best bet so far, but is a bit too simplistic (actions like capturing data or entering requests are a bit laborious). Can anyone recommend a good, lightweight tool for sending / viewing the raw data that constitute HTTP messages? Edit: I should add that I'm on Windows. Also, the tool would need to work both with remote and local servers.

  Read the article

• Open NetApp CIFS Share

  - by kingfish

  I have a CIFS share on a NetApp device. I want this share to be completely open to any user/computer on the same network. I don't want any authentication (domain, workgroup, etc) required; no login/password should need to be provided. Currently I have CIFS configured to use "Domain - Windows 2000" authentication and have the permissions on the share set to "Everyone - Full Read/Write" but if you try to connect to it from a machine that isn't bound to the domain it is asking for login info.

  Read the article

• Nginx save file to local disk

  - by Dean Chen

  My case is: In our China company, we have to access one web server in USA headquarter through Internet. But network is too slow, and we download many big image files. All our developers have to wait. So we want to setup a Nginx which acts as reverse proxy, its upstream is our USA web server. Question is can we make Nginx save the image files from USA web server into its local disk? I mean let Nginx act as one cache server.

  Read the article

• Automatically connect to 3G dialup connection

  - by Philipp

  I have a notebook with an internal 3G modem (a HUAWEI Mobile Connect) which appears to the system as a dialup modem. When I want to connect to the Internet, I need to open the charms bar, click settings, network, the modem and "connect" to open the dialup dialog on the desktop. When the connection is interrupted for some reason, I need to repeat these steps. Is there a way to configure Windows 8 to automatically (and preferably silently in the background) connect with this modem at system startup and automatically restore the connection should it get interrupted? As an operating system which is developed for mobile devices, I would expect it to be able to somehow be able to manage a always-on 3g connection.

  Read the article

• Fast, reliable data transfers from/to China

  - by Nils

  We are a small company and we will need to transfer rather large amounts of data (10GB+ each time) between Europe and China in the near future. As many may have experienced, Internet connections to or from China can be rather unreliable and slow at times without any apparent reason. For example, while sending data to China via FTP generally works well, it can be painfully slow in the other direction. Currently, we are investigating new ways to have high transfer rates in both directions. So far we have tried: FTP (see above) FTP over VPN services (generally slower than direct connections) F2F (like Retroshare or Freenet - slow!!) Aspera (fast but expensive!) BitTorrent (unreachable end nodes, b/c of firewalls which we must not configure) We would like to try: Cloud storage (e.g. Amazon S3, Google Storage) - are those services always and reliably reachable from inside China? Point-to-Point VPN (currently not possible, b/c of the network, see above) I'd be especially grateful to hear from people who have already dealt with this kind of problem before.

  Read the article

• Has anyone figured out how to use same username with different passwords (Windows)

  - by Coder

  Tried Googling, tried net use, and anything I could, with no results. I have a PC with users, and I have a network server with shared folders. For some users the usernames of the share and local account match, but the passwords are different (a good security practice). Unfortunately, Windows doesn't want to remap the drives on login, and asks for credentials when I try to connect. If I enter the password, the connection succeeds, but it still fails on next login, even if I have checked the "remember" checkbox. On PC: usera@machinea pass1 On NAS: usera@nas pass2 net use z: \\nasip\usera /user:nasip\usera pass2 /persistent:yes Credential store seems to have the user credentials stored... But the mapping fails all the time.

  Read the article

• Does the password get sent in the clear when connecting to Sql-Server?

  - by Scott Chamberlain

  I was asked this today and I honestly did not know the answer. If you connect using a connection string without sspi to a server is there any way a 3rd party can intercept on the wire the password used to log in? "Data Source=MyServer;Initial Catalog=MyDatabase;User Id=sa;Password=CanThisBeSniffed;" I am not asking about MiTM attacks just someone listing on the same computer or on the same hub on the network with wireshark or something similar running. I fired up wireshark myself and did not see it in plain text but it could be a simple obfuscation or proper encryption, I just wanted to know which.

  Read the article

• Deactivate SYN flooding mechanism

  - by mlaug

  I am running a server that is running a service on port 59380. There are more than 1000 machines out there connecting to that service. Once I need to restart the service all those machines are connecting at the same time. That made some trouble as I have seen that log entry in kern.log TCP: Possible SYN flooding on port 59380. *Sending cookies*. Check SNMP counters. So I changed sysctl net.ipv4.tcp_syncookies to 0 because the endpoints to not handle tcp syn cookies correctly. Finally I restarted my network to get the changes in production Next time I had to restart the service, the following message was logged TCP: Possible SYN flooding on port 59380. *Dropping request*. Check SNMP counters. How can I prevent the system for doing such actions? All necessary counter measures are done by iptables...

  Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >