Search Results

Search found 73376 results on 2936 pages for 'set based'.

Page 59/2936 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

  • Word 2003 set styles won't convert over when opened in Word 2010

    - by Candy
    If I have set styles in a Word 2003 document, how can I get the set styles to appear when the document is opened in Word 2010? When I open the document that was created using 2003 (that has set custom styles), in 2010 it converts everything to the 2010 styles. When I try selecting Change Styles?Style Set?Word 2003, it doesn’t pick up my custom styles; it only picks up the default 2003 styles. I want to be able to keep my custom styles that were created in the template using 2003.

    Read the article

  • Attempting to set up xampp and zend server on the same machine

    - by umbregachoong
    I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

    Read the article

  • How to move Mdadm RAID drive (EBS based) to different AWS Instance

    - by Stanley
    We have a media-rich web application that is hosted on AWS. We have several Web Servers and we have an NFS server. On the NFS server (Linux server) we have several EBS volumes that are mounted and we've used mdadm to implement the different mounted volumes as a single RAID volume. The Web Servers simply access the NFS storage through a mount point. Amazon has now let us know that they will be performing power maintenance on this server in a couple of days time. Since all our media is on here it would render our site unusable for the hours while Amazon is working on it. We want to try and prevent this downtime. I was thinking that we can prevent server downtime by perhaps setting up a new server temporarily and attaching the EBS drives (raid volume) to that server and have our web servers point there during maintenance. This is a very high risk operation since this involves several terabytes of our production data. What would be the safe way to move over our logical raid drive (md0) to a new amazon instance? I was hoping that I could start with building the new server, mounting the ebs volumes and assembling the RAID partition using mdadm --assemble --scan before unmounting from the existing instance so that I can first test that everything works and thus having it mounted on two instances at the same time, but I don't believe that is possible with the way that filesystems work. How do I move a Linux software RAID to a new machine? suggests a way to move drives, but isn't really a cloud-based question. Perhaps there are simpler ways to prevent system downtime with our solution being hosted on the cloud? I have considered taking an EBS snapshot, but that tries to replicate all the many terabytes of mounted storage, so this is not a practical solution. Any ideas?

    Read the article

  • How to setup NTFS ACL with Acces Based Enumeration

    - by Patrick Pellegrino
    We're in the process of migrating from Novell Netware to Windows 2K8 R2 infrastructure (AD, File server, print server... etc) My question is about ACL. While Netware and Windows are totally different, I want to be sure my thnking is good before screwing everything up! There's a scenario : F: | +-- DATA <= Shared as DATA with Access based enumeration | +-- Folder 1 +-- Team 1's Folder +-- Team 2's Folder ... In that case, by default, rights are herited from the F: to the deepest folders. What we want : Administrators group have full control top - down. From DATA, ABE list only folders that users have access. (ex. : I'm in group Team 2, I see Team 2's Folder). From what I understand, at DATA I remove all NTFS ACL to be herited (ex. Users Group), be sure to keep Administrators Group and SYSTEM user. After that, grant Full control (or any right needed) on each folder to Groups or Users that have to have access. Does I'm wrong ? Anything I should take care of ? Any help to my understanding will be very appreciated. Regards.

    Read the article

  • Setting cfengine3 class based on command output

    - by gnomie
    This question is very similar to How can I use the output of a command in cfengine3 but the answer does not apply in my case I believe. I want to update a git repository via "git pull" and based on whether that lead to changes trigger some follow up action. Simplified, if there was something like "match output and set class" via some body if_output_matches I would want to use something like this: bundle agent updateRepo { commands: "/usr/bin/git pull" contain => setuidgiddir_sh("$(globals.user)","$(globals.group)","$(target)"), classes => if_output_matches("Already up-to-date.","no_update"); reports: no_update:: "nothing updated"; } body contain setuidgiddir_sh(owner,group,folder) { exec_owner => "$(owner)"; exec_group => "$(group)"; useshell => "true"; chdir => "$(folder)"; } So, is it possible to use the output of a - possibly expensive command - and base some decision on that? The execresult function is no good choice for me as a) the pull may become expensive at times (not recommended following the cfengine3 reference) and b) does not allow to specify user, group, working dir - which is important in my case. The repository is in user space and not owned by root.

    Read the article

  • Looking for a host based network monitor solution

    - by Ole Martin Handeland
    Hi all! Problem So, my hosting company has a network usage graph for my dedicated server. It seems that one day earlier this month, my network usage suddenly spiked with several hundred megabytes transferred (usually it's in the tens, not hundreds). It was probably me, but i just can't be sure who or what it was. Question So my question is; does anyone know of any host based solution for monitoring network usage that would tell me the client's IP-address, the port/service he/she used? What I don't want I'm just guessing that someone will suggest i use nagios, munin, zabbix, cacti, mrtg - I've also looked at those, but a graph over network usage will not give me the answers I'm looking for. :-) Almost there I've already looked at a lot of monitoring solutions, and I've tried [ntop][http://www.ntop.org/], [darkstat][http://unix4lyfe.org/darkstat/] and others. Darkstat just didn't give me the answers. Although it listed a lot of statistics, and i could list the clients - it doesn't show me the network usage for a particular period. Ntop is by far the best I've seen so far - but i think it mostly shows current network usage, not the historical part. I could run apt-get upgrade and download a whole bunch of software, but not see it in the log afterwards.

    Read the article

  • apache adress based access control

    - by stijn
    I have an apache instance serving different locations, eg https://host.com/jira https://host.com/svn https://host.com/websvn https://host.com/phpmyadmin Each of these has access control rules based on ip adres/hostname. Some of them use the same configuration though, so I have to repeat the same rules each time: Order Deny,Allow Deny from All Allow from 10.35 myhome.com mycollegueshome.com Is there a way to make these reusable so that I don't have to change each instance everytime something changes? Ie, can I write this once, then use it for a couple of locations? Using SetEnvIf maybe? It would be nice if I could do something like this pseudo-config: <myaccessrule> Order Deny,Allow Deny from All Allow from 10.35 myhome.com mycollegueshome.com </myaccessrule> <Proxy /jira*> AccessRule = myaccessrule </Proxy> <Location /svn> AccessRule = myaccessrule </Location> <Directory /websvn> AccessRule = myaccessrule </Directory>

    Read the article

  • Set Folder Icon for all Os

    - by Am1rr3zA
    Hi, I want set icon to my folder in My external hard drive but when I change it (by right click on it and -> properties -> customize -> change icon (i address the icon from my extenal hard drive)) it just change in my windows and when plug my extenarnal-hard to another windows it's don't show my icon! how should fix this? P.S: is there a way to set icon for folder show in all os (linux, windows, OSX, ..) note: I don't want set icon to 1 drive I want set icon to all my folder in my drive.

    Read the article

  • set service dependency on internet connection

    - by nccsbim071
    Hi, I have created a window service and set some dependencies like on MSMQ, MSSQLSERVER and so. Everything is working nice. but i need to send another dependency for my service. That is on internet connection. My service is responsible for sending emails. As soon my server starts, my service starts too and it finds if there is anything to send, if there is, it starts to send email, if during sending it is not able to connect to the internet it cannot send email. so i guess i should set my service dependency on internet connection too. I already set my window service dependency to MicrosoftSQL Server and Microsoft Message Queuing by editing the registry value. by adding new multi string value named "DependOnService", Type "REG_MULTI_SZ" and space separated names of the services that my service depends upon for the Data. For Microsoft SQL Server i set the value to "MSSQLSERVER" but i don't know the name of the internet service that i need to set dependency upon. how can i do this, any help please Thanks

    Read the article

  • Set character_set_results UTF8 in MySQL my.cnf

    - by Marc
    Hi Folks, how can i set the Variable character_set_results from latin1 to uft8? I thought it would be enough if I would add the following variable in the my.cnf: default-character-set=utf8 But it not seem so: mysql SHOW VARIABLES LIKE 'character_set_%'; +--------------------------+----------------------------+ | Variable_name | Value | +--------------------------+----------------------------+ | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | utf8 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | utf8 | | character_set_system | utf8 | | character_sets_dir | /usr/share/mysql/charsets/ | +--------------------------+----------------------------+ Some body have an idea how i can set character_set_results to utf8?

    Read the article

  • Need help finding a program to split PDFs based on text in specific areas

    - by Sean
    I reeeeally need help with this. I work for a University in the admissions office and we get large PDFs of every document that an applicant uploads to us. What I need to do is split these PDFs into separate documents. Each of the separate documents has a head at the top of what type of document it is (Statement of Purpose, Transcript, etc). I found a program a few weeks ago that at first seemed to work great (A-PDF Splitter). It would look for every type of document in a combined PDF (eg. Statement of Purpose), and if it saw that heading it would create a new PDF named "ORIGINALFILENAME-Statement of Purpose". I soon discovered though that the program breaks for no reason on certain PDFs, and I have to take the time to take that PDF out of the queue and start the splitting over again (and we get 250 a day). I contacted their support and they basically told me I was SOL. So please, if you can find me a program to split PDFs into smaller PDFs based on if it finds particular text in a region, then I would be forever in dept to you. If I don't find one soon then I'm going to be spending the entire day splitting PDFs by hand and my boss isn't going to be happy.

    Read the article

  • Using udev to create a character device based on a driver being loaded

    - by SteveCB
    I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

    Read the article

  • Denying access to website via htaccess based on http header

    - by neekster
    I've been trying for ages to get this to work and I can't put my finger on it. What I'm trying to do is block access to a site from a number of countries, based on the CF-IPCountry header added by CloudFlare. I figured htaccess was a suitable way to do this. We are running LiteSpeed 4.2.4 on top of DirectAdmin for a control panel. The problem we having is the htaccess rule doesn't seem to do anything. Here's the rule we tried: SetEnvIf CF-IPCountry AU UnwantedCountry=1 Order allow,deny Deny from env=UnwantedCountry Allow from all That makes no difference at all, connections are still accepted. Just to check that the rule was at least being processed, I changed Allow from all to Deny from all, and connections were refused. So it appears to be a problem wit the variable. Here's the relevant headers that come in with the request. Connection: Keep-Alive Accept-Encoding: gzip CF-Connecting-IP: xx.xx.xx.xx CF-IPCountry: AU X-Forwarded-For: xx.xx.xx.xx.xx CF-RAY: c9062956e2d04b6 X-Forwarded-Proto: http CF-Visitor: {"scheme":"http"} Zone-Name: xx.com.au Hopefully someone can help me out, this has been driving me nuts for too long. Thanks

    Read the article

  • In a Shell scripts, check version of installed package, make a decision based on output

    - by DJDarkViper
    Looking to write a cross distro / cross version shell script that makes sure a forced version of PHP is installed Example: Ubuntu 12.04 has 5.3, Ubuntu 13.10 has 5.5, Debian 7 has 5.4 I need this script, when run on a distro that has an old version of PHP, to update the repo to point to a package for 5.4, and if the distro has too new of a version, can downgrade to 5.4 appropriately. Im still not entirely comprehensive of Shell/Terminals technical limit of what you can do with it, but ill be perfectly frank that im still not totally used to existing tools The best I can think at the moment is: php -v | grep "PHP 5" but that returns a bunch of potentially changeable granular characters (PHP 5.4.4-14+deb7u5 (cli) (built: Oct 3 2013 09:24:58) ). Im not sure what to pipe to after this to extract out the characters im interested in Im not sure if im being totally clear, im not sure how to ask this.. Basically, in an automated shell script for Linux distros, how do I extract the PHP version (and just the PHP version number preferably) and make a decision based on that output EDIT This line ended up doing pretty dang good php -v | grep "PHP 5" | sed 's/.*PHP \([^-]*\).*/\1/' | cut -c 1-3 Bit long in the tooth, but gives me "5.3", "5.4", and "5.5" which is exactly what I need to work with

    Read the article

  • Best console based text editor not only for programmers [closed]

    - by robo
    I need console based text editor for writing both source codes and human readable texts such as emails. I need it to be user friendly. It mean for me: You can use it the same way as the notepad or gedit. You can use mouse there. If you need your mother of girlfriend or somebody to edit your text they will know what to do, they will not realize it is a console and will have only a feeling it is something like a notepad. copy, paste, undo works as usual with usual key combinations (Ctrl-C, Ctrl-V, Ctrl-Z). shift and arrows works as usual. They select the text. And when I return to the computer I want to use the text editor for programming. I expect: Syntax highliting auto indenting replacing spaces with tabs keyboard shortcuts for compiling possibility to configure it to use a debugger autocompletions for c#, java, c++ and other languages other things I expect from IDE's. I was working and configuring vim for a few years. But It never fulfilled all of my expectations (but it almost did). I thing I could get vim configured perfectly if I had few more weeks time for configurating it. Unfortunately I cannot afford to be configuring vim forever. Is there other alternative? Hopefully some editor I once set up and it will works forever? What do you use? I often hear people are using emacs. Is it worth learning?

    Read the article

  • Delete cell content in Libre (Open) Office based on the cell value

    - by take2
    I have a huge csv file (tens of thousands of rows) that I need to filter based on different criteria. After trying to find a proper CSV editor, I decided to use LibreOffice Calc. CSVed is great, but it doesn't support neither UTF-8 nor macros for advanced filtering. So, there are 4 columns, 3 of which contain numbers (with decimal numbers) and 1 of which contains text. I'm trying to find a way to delete rows with a macro code. I can achieve the desired behavior with filters too, but it's annoying to type all of the filtering values over and over again and there doesn't seem to be a way to export the filter and us it repeatedly. These rows should be deleted: The ones that don't contain certain words in textual column (column A). There are a few thousand different words used in that column and I want to keep only the rows that contain one of about 30 words in that column. Additionally, the number is the other columns should be bigger than 3.8 (column B), 4.5 (column C) and smaller than 20 (column C). The row-deletion type is "Shift up". Hopefully I have explained it well. Thanks a lot in advance for your help!

    Read the article

  • Linux port-based routing using iptables/ip route

    - by user42055
    I have the following setup: 192.168.0.4 192.168.0.6 192.168.0.1 +-----------+ +---------+ +----------+ |WORKSTATION|------| LINUX |------| GATEWAY | +-----------+ +---------+ +----------+ 192.168.150.10 | 192.168.150.9 +---------+ | VPN | +---------+ 192.168.150.1 WORKSTATION has a default route of 192.168.0.6 LINUX has a default route of 192.168.0.1 I am trying to use the gateway as the default route, but route port 80 traffic via the VPN. Based on what I read at http://www.linuxhorizon.ro/iproute2.html I have tried this: echo "1 VPN" >> /etc/iproute2/rt_tables sysctl net.ipv4.conf.eth0.rp_filter = 0 sysctl net.ipv4.conf.tun0.rp_filter = 0 sysctl net.ipv4.conf.all.rp_filter = 0 iptables -A PREROUTING -t mangle -i eth0 -p tcp --dport 80 -j MARK --set-mark 0x1 ip route add default via 192.168.150.9 dev tun0 table VPN ip rule add from all fwmark 0x1 table VPN When I run "tcpdump -i eth0 port 80" on LINUX, and open a webpage on WORKSTATION, I don't see the traffic go through LINUX at all. When I run a ping from WORKSTATION, I get this back from some packets: 92 bytes from 192.168.0.6: Redirect Host(New addr: 192.168.0.1) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 de91 0 0000 3f 01 4ed3 192.168.0.4 139.134.2.18 Is this why my routing is not working ? Do I need to put GATEWAY and LINUX on different subnets to prevent WORKSTATION being redirected to GATEWAY ? Do I need to use NAT at all, or can I do this with routing alone (which is what I want) ?

    Read the article

  • Formula-based Excel page headers

    - by Jake Krohn
    I'm using the "Rows to repeat at top" function in Excel's "Page Setup" dialog to ensure that a multi-row header block appears on every printed page of my worksheet. However, I'd like to be able to change certain bits of the header based on the content of the current page. I would simply like to display the value of one cell in the first row that is printed on the page. If this is my header: Section: xx And the data looks like this (columns are Section and Name): 1 Foo 1 Bar 2 Baz I want the "xx" in the header to be "1". If, further down on the next page, the value in the Section column is "3", I want that printed in the header of the next page. I originally thought that using the "OFFSET" function might help, e.g. ="Section: "&OFFSET(A2, 1, 0) But it only shows the offset from the original placement of the header, thus only working on page 1. The end document is a PDF, so right now I'm able to go back in with the "TouchUp Text Tool" in Acrobat and add the numbers page by page. But it gets to be a tedious process with 70+ page reports. Anyone have any better ideas that don't require me mucking up the original Excel document with inserted headers every N lines? This is Excel 2008 for Mac, if it makes a difference.

    Read the article

  • Windows XP failing to set theme correctly on auto-login

    - by Alois Mahdal
    On several testing machines we have, when automatic login (as Administrator) is activated, Windows fails to set theme (Display properties - Themes) correctly. Particularly, even if theme is set to "Windows Classic", visually it's obvious that "Windows XP" is applied (the one with blue title bars and red "X" butons). I have only seen this happen when Auto-login is set--we always use Administrator on XP. Even if I log out and back in manually, theme is set correctly. Apart from logging out and in, it's also possible to reset theme in "Display properties". It does not happen in 100% of the cases, but it's way over 50%. Definitely it's often enough to be annoying. I believe this is a bug in Windows XP. I have never encountered it on other Windows versions. Does anybody know how to avoid this issue once forever? (Or can anybody provide explanation, relevant links, etc.?)

    Read the article

  • Change source address based on destination IP

    - by hgj
    We have several "router" machines that gather a lot of external IP addresses on the same host and redirect, NAT or proxy the traffic to the internal network. They also act as routers for the machines on the internal network. This works fine, however I am unable to make the routing table, so I can change the source address, based on the destination a machine from the internal network want to access. Let's say I have a router, that has public addresses P1 (5.5.5.1/24) and P2 (5.5.5.2/24). All traffic goes through P1, but if necessary, the host is reachable on P2 too. This looks like this and works fine: > ip addr ... 1: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether aa:bb:cc:dd:ee:11 brd ff:ff:ff:ff:ff:ff inet 5.5.5.1/24 brd 5.5.5.255 scope global eth1 inet 5.5.5.2/24 brd 5.5.5.255 scope global secondary eth1:p2 ... Now I want to use P2 as the source address, if I want to access the Google DNS service for example (8.8.8.8). So I add a row in the routing table like: > ip route add 8.8.8.8 via 5.5.5.254 dev eth1 src 5.5.5.2 > ip route ... default via 5.5.5.254 dev eth1 5.5.5.0/24 dev eth1 proto kernel scope link src 5.5.5.1 8.8.8.8 via 5.5.5.254 dev eth1 src 5.5.5.2 ... But this does not work. If I ping 8.8.8.8, the host still uses P1 as the source address, and does not use P2 at all for outgoing connections. Am I doing it right? I guess not...

    Read the article

  • OSX Server - How to set environment variable on network user login

    - by tmkly3
    I have a group of users on my server, "Developers", and I would like an environment variable to be set for them whenever they login. More specifically, when anyone in this group logs in, I would like the equivalent of: setenv ANDROID_SDK_HOME /Developers/Android/User to be set at login. I can do this with a login script if necessary, but what I'm asking is: is it possible to set this type of thing in Profile Manager, Workgroup Manager, Directory Utility, etc? Thanks - I've looked everywhere but can't find anything.

    Read the article

  • How do you set up CRON?

    - by user1723760
    I have never used CRON before but I want to use CRON in order to be able to perform schedule jobs for a php script. The php script is called "inactivesession.php" and in the php script is this code: <?php include('connect.php'); $createDate = mktime(0,0,0,10,25,date("Y")); $selectedDate = date('d-m-Y', ($createDate)); $sql = "UPDATE Session SET Active = ? WHERE DATE_FORMAT(SessionDate,'%Y-%m-%d' ) <= ?"; $update = $mysqli->prepare($sql); $update->bind_param("is", 0, $selectedDate); $update->execute(); ?> Wht I want to do is that when the above date is reached (25th Oct), I want the php script to perform the UPDATE statement above. But my question is that how do I use CRON in order to do this? The server I am using is the university's server known as helios, does CRON need to be set up in helios, (do I have to call the admin for this) or is it something else which uses CRON. I have never used CRON before so can you explain to me how CRON can be set up for the example above with the server I am using? Thanks UPDATE: Hi, I think the name of the OS is actually helios but I am not sure, I have a wikipedia page on this: here. I will read the crontab wikipedia page and see what I can find, but what my question is that is CRON already set up, do I just go right ahead and use CRON or do I need to set it up first?

    Read the article

  • Hard Disk based storage library

    - by Ryan M.
    We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

    Read the article

  • How to set original error message for apache 2.2

    - by ffffff
    Apache 2.2 default 414 message is Request-URI Too Large The requested URL's length exceeds the capacity limit for this server. I wanna set custom message so I set http.conf ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var But I do not get along well How to set original error message for apache 2.2

    Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >