Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 590/750 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• Windows 7 machine, can't connect remotely until after ping

  - by rjohnston

  I have a Windows 7 (Home Premium) machine that doubles as a media centre and subversion server. There's a couple of problems with this setup, when connecting to the server from an XP (SP3) machine: Firstly, the machine won't respond to it's machine name until after it's IP address has been pinged. Here's an example: Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Rob>ping damascus Ping request could not find host damascus. Please check the name and try again. C:\Documents and Settings\Rob>ping 192.168.1.17 Pinging 192.168.1.17 with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time=2ms TTL=128 ... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 2ms, Average = 1ms C:\Documents and Settings\Rob>ping damascus Pinging damascus [192.168.1.17] with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time<1ms TTL=128 .... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\Documents and Settings\Rob> Likewise, subversion commands with either the machine name or IP address will fail until the machine's IP address is pinged. Occasionally, the machine won't respond to pings on it's IP address, it'll just come back with "Request timed out". The svn server is VisualSVN, if that helps... Any ideas?

  Read the article

• Web hosting for multiple web sites providing system isolation

  - by Justin

  We have a small number of projects where we expect the client will not be maintaining the installed versions of applications we install to power the site (such as Drupal). Given that an important part of security is keeping things updated, we don't want to host these projects on our Plesk-powered dedicated servers that currently host lots of our other client's websites. Our goal is to find a host where we can deploy isolated instances (be these slices, virtual servers, grid servers, etc) for each individual (or groups of 2-3) web sites as we need them. These instances would be completely separate, so that if one web site were hacked it would not impact any other site. Typical hosting requirements: Linux Apache PHP 5 MySQL Supports Drupal Ability to setup a cron task (but we don't need SSH access) Daily backups Virtualized/cloud hosting (we want to avoid shared) Pricing per site is around $25/month OS is patched automatically Some options we have considered but won't work: MediaTemple: Two major data center-wide security incidents and recent downtime foster doubt about this host's technical ability. Slicehost: This would require us to manage the entire server, which we don't want to do. Rackspace Cloud Sites (formerly Mosso): No backup options. Do you have any recommended hosting options for given these requirements?

  Read the article

• CentOS security for lazy admins

  - by Robby75

  I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

  Read the article

• Switching from prefork MPM to worker MPM + php-fpm on ubuntu

  - by Shane

  All tutorials I found were how to fresh install worker MPM + PHP-FPM, since my wordpress blog's already up and running with prefork MPM, correct me if I'm wrong in the simulated installation process: I'm on ubuntu and according to some tutorials, the following lines would do all the tricks: apt-get install apache2-mpm-worker libapache2-mod-fastcgi php5-fpm php5-gd a2enmod actions fastcgi alias Then you setup configuration in /etc/apache2/conf.d/php5-fpm.conf: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization </IfModule> After all these, restart: service apache2 restart && service php5-fpm restart Question: 1) Would it cause any down time in the whole process for previously running sites with prefork MPM? 2) Do you have to change any already existent configuration files like php or mysql or apache2(would they take effect immediately after the switch without you doing anything)? 3) I've already have apc up and running, do you have to re-install/re-configure it after the switch? 4) How do you find out if apache2 is working in worker MPM mode as expected? Thanks a lot!

  Read the article

• Help setting up a secondary authoritative DNS server.

  - by GLB03

  We have three Authoritative DNS servers and three recursive/caching DNS servers on my campus. Authoritative servers DNS1- Windows 2003 DNS2- Old Red Hat ----- Replacing w/ newer version DNS3- Windows 2008 (I installed) Caching and Recursive resolvers servers Server1- Windows 2003 Server2- CentOS 5.2 (I installed) Server3- CentOS 5.3 (I installed) I am replacing DNS2 with a newer Red Hat version, but have no documentation on how it was implemented. I have setup caching and windows authoritative servers, but not a linux secondary authoritative server. I have a perl script from the original server that pulls data from our DNS1 server. We use DJBDNS and TinyDNS on our linux servers. Our Network Engineer says the DNS2 server I am replacing is an authoritative server that doesn't need to be caching, but the only instructions I see is for an Authoritative server that does caching as well. Can someone point me in the right directions. I thought I was on the right track with using these instructions but when I query my new dns server I get "No response from server", I have temporarily disabled iptables to eliminate it from being an issue. ps -aux | grep dns avahi 3493 0.0 0.2 2600 1272 ? Ss Apr24 0:05 avahi-daemon: running [newdns2.local] root 5254 0.0 0.1 3920 680 pts/0 R+ 09:56 0:00 grep dns root 6451 0.0 0.0 1528 308 ? S Apr29 0:00 supervise tinydns dnslog 6454 0.0 0.0 1540 308 ? S Apr29 0:00 multilog t ./main tinydns 9269 0.0 0.0 1652 308 ? S Apr29 0:00 /usr/local/bin/tinydns

  Read the article

• IIS 7.5 error 500 in fastcgi module after upgrading wordpress to 3.0.2

  - by Maniac13

  I am running multiple wordpress blogs on the following setup: Server 2008 R2; IIS 7.5; PHP 5.3.3; MySQL 5.0.7; I upgraded my wordpress install from 2.9.2 to 3.0.2 (on 2 different sites) today and the upgrade went fine. I can serve .php pages without errors, log into the admin system etc. I can browse my blog by going directly to mywebsite.com/index.php, but when I try to go to mywebsite.com (without the index.php) I get he below 500 error. I reset IIS, removed and re-attached the default document, but I am running out of ideas. Please if anyone has a solution for this that would be great. This is the 500 error I am getting: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP FastCGI Error Code 0x00000000 Requested URL http://mywebsite.com:80/index.php Physical Path D:\mywebsite.com\index.php Logon Method Anonymous Logon User Anonymous Thanks Stephan

  Read the article

• Mysql cluster strange behaviour

  - by Champion

  Hi Guys, I have 2 mysql clusters on two different servers with management node on each of them. It went down someway. I ran following commands to start the cluster: Start the management node on srv1: srv1: mysqlc/bin/ndb_mgmd --initial -f my_cluster/conf/config.ini --configdir=/home/mysql_cluster/my_cluster/conf Start the management node on srv2: srv2: mysqlc/bin/ndb_mgmd --initial -f my_cluster/conf/config.ini --configdir=/home/mysql_cluster/my_cluster/conf Start the ndbd nodes on srv1: srv1: mysqlc/bin/ndbd --initial -c localhost:1186 Start the ndbd nodes on srv2: srv2: mysqlc/bin/ndbd --initial -c localhost:1186 Start mysqld server on srv1: srv1: mysqlc/bin/mysqld --defaults-file=my_cluster/conf/my.cnf --user=root & and here is the problem. mysql server not loading the data. Only database names are present. All the tables which are ENGINE=ndbcluster are not being loaded. Tables with ENGINE=myisam are being loaded. Backup scripts helped me load the data. But this way I can't use cluster setup. Similar issue appeared when i started srv2. How can I resolve this issue ?

  Read the article

• Using secure proxies with Google Chrome

  - by cYrus

  Whenever I use a secure proxy with Google Chrome I get ERR_PROXY_CERTIFICATE_INVALID, I tried a lot of different scenarios and versions. The certificate I'm using a self-signed certificate: openssl genrsa -out key.pem 1024 openssl req -new -key key.pem -out request.pem openssl x509 -req -days 30 -in request.pem -signkey key.pem -out certificate.pem Note: this certificate works (with a warning since it's self-signed) when I try to setup a simple HTTPS server. The proxy Then I start a secure proxy on localhost:8080. There are a several ways to accomplish this, I tried: a custom Node.js script; stunnel; node-spdyproxy (OK, this involves SPDY too, but later... the problem is the same); [...] The browser Then I run Google Chrome with: google-chrome --proxy-server=https://localhost:8080 http://superuser.com to load, say, http://superuser.com. The issue All I get is: Error 136 (net::ERR_PROXY_CERTIFICATE_INVALID): Unknown error. in the window, and something like: [13633:13639:1017/182333:ERROR:cert_verify_proc_nss.cc(790)] CERT_PKIXVerifyCert for localhost failed err=-8179 in the console. Note: this is not the big red warning that complains about insecure certificates. Now, I have to admit that I'm quite n00b for what concerns certificates and such, if I'm missing some fundamental points, please let me know.

  Read the article

• Diverting sound output of MCE to SPDIF

  - by Saxtus

  I have an ASUS SupremeFX II audio card (which in fact is an onboard audio riser slot) with the default drivers that are pre-installed by Windows 7 x64 for this card. I am able to manually switch between analog output and SPDIF output by the means of control panel (or external utilities like STADS), a change that affects all applications. The problem is that by doing that every time I am about to launch Windows Media Center, except that it's not that elegant, also makes all other Windows application's sounds to pass through SPDIF too, bypassing analog output completely, blending with what I am watching at Windows Media Center. Is there a way to make SPDIF as the default playback device for Windows Media Center? I know other programs that have a setting like that (foobar2000 for example) working like charm, allowing me to even have different outputs working at the same time (tested with my current card successfully). But when comes to Windows Media Center... it just use what the default playback device is all the time. The only setting that I know of, is under: Settings General Windows Media Center Setup Set Up Your Speakers and what it does is to just change the default playback device for entire system. Please help!

  Read the article

• PostgreSQL failover cluster on Windows Server

  - by user36997

  We are looking for advice on how to setup a basic failover cluster for our application: We will be using 4 machines running Microsoft Windows Server (most probably 2003). All four will always run our application, which is essentially a web service. Load balancing is "outsourced" - somebody else handles the distribution of the web requests among the servers. Only one of the servers will be running the PostgreSQL server actively at any given time. Another server (of the four) also has the DB installed, but is on standby/passive. The DB data is stored on shared storage. No copying data between servers. Reads are done very frequently by many end-users, and in rather small chunks of data. Writes are done much less frequently, by less users, and in very large bulks of data. Now, how can one configure Microsoft Cluster Service to keep only one instance of the DB server and 4 instances (1 per server) of our application at all times? And does PostgreSQL integrate neatly with MSCS at all? Update: Instead of keeping the data on shared storage, I also consider using log shipping to replicate data on a couple of DB servers. There are two issues with this option: Log shipping only makes sure that I have a second server that gets all of the data and is ready to take over. How do I implement the actual failure detection and failover switch? Switching back: Suppose the master fails and the system automatically fails over to the slave, and later the master comes back online. I understand that with WAL shipping this will require to reconfigure the log shipping once again, and that switching back is far from seamless. Is that so?

  Read the article

• What speed are Wi-Fi management and control frames sent at?

  - by Bryce Thomas

  There are a bunch of different 802.11 Wi-Fi standards, e.g. 802.11a, 802.11b, 802.11g, 802.11n etc. that all support different speeds. Wi-Fi frames are generally categorised as one of the following: Data frames - carry the actual application data Control frames - coordinate when its safe to send/reduce collisions Management frames - handle connection discovery/setup/tear down (e.g. AP discovery, association, disassociation) My question is about whether all these frames, and specifically management frames, are transmitted at the fastest supported speed available, or whether certain classes of frames are transmitted at some lowest common denominator speed. I have noticed that when I put an 802.11b/g only device into monitor mode and capture traffic over the air, I still see management frames (e.g. association/disassociation) being transmitted between my phone and AP which are both 802.11n, even though 802.11n has a higher transfer rate. So I am imagining one of two possibilities: My 802.11n phone/AP had to negotiate a slower speed for some reason and that's why I can see their frames on my 802.11b/g monitoring device. Management frames (and perhaps control frames also?) are sent at a lower speed, and it's only data frames that are transmitted faster with newer 802.11 standards. The reason I would like to know which one of these two possibilities (or perhaps a third possibility) is the case is that I want to capture management frames, and need to know whether using an 802.11b/g card is going to lead to me missing some frames sent at higher speeds than the monitoring card can observe. If management frames are indeed sent at a slower rate, then it's all good. If I just happen to be seeing the management frames because my phone/AP have negotiated a slower rate though, then I need to reconsider what card I use for packet capture.

  Read the article

• Webserver optimization

  - by f-aminov

  Hi guys! I have a website hosted on a VPS (512Mb - minimum guranteed memory, 510Mhz proccessor, Debian 5.0 Lenny, Apache 2.2.9 with nginx 0.7.65 as a frontend to serve static content, MySQL 5.1.44, PHP 5.3.2 with APC caching). I'm a web developer, so I'm not very good at optimizing servers, but I've managed to install and setup all those neccessary components (LAMP, nginx, etc.). After that I decided to stress test my website (which uses Drupal 6.16 with caching and all possible optimization enabled) using a utility called "Webserver Stress Tool 7". And it seems to me that the results aren't any good - here is a graph (sorry, as a new user I'm not allowed to post images) As you can see the response time depending on amount of simultaneous users increases very quickly. With 10 simultaneous users the time is about 1000ms, with 100 simultaneous users it's about 15000ms (15s!). The question is do you think this is normal behavior for such a server or something is wrong with the settings and optimization? If you think something is wrong what particulary could be wrong? Any other suggestion how to speed this a little bit up?

  Read the article

• Email bouncing sent from Google

  - by davidmck

  I'm hoping someone here has an idea of where to look next. We have a domain we support which has email sent to it from one particular user bounce with the following message: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Unrouteable address (state 14). We only have reports of bouncing form this one particular user (who is someone we don't support - except they'd like to be able to contact our customer and we're trying to figure out if the problem is on our end). Many people can successfully send to this domain and the user who is getting bounce messages can send to other domains that we support (so it's clearly something specific with the princetonscoop.com domain and not our setup in general). I've reviewed the MX records multiple times and the server logs don't show a connection which generates this error (in fact this error is not one that our mail server would ever return). So it appears that google is contacting a different mail server for some reason. I have tested sending from my gmail account and that works. I believe the sender is using a google-apps account (the account they are using is from their own domain, not a gmail account). Any ideas on what might be happening here or what to test/investigate next? Thanks.

  Read the article

• Routing data through VPN in linux

  - by Shadyabhi

  I think its a silly question but still here it goes.. Terminal Output: eth0 Link encap:Ethernet HWaddr 00:1c:c0:37:5e:25 inet addr:10.100.98.51 Bcast:10.100.98.255 Mask:255.255.255.0 inet6 addr: fe80::21c:c0ff:fe37:5e25/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:29677 errors:0 dropped:0 overruns:0 frame:0 TX packets:5209 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3179007 (3.1 MB) TX bytes:610142 (610.1 KB) Memory:e0380000-e03a0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9555 (9.5 KB) TX bytes:9555 (9.5 KB) vpn_0 Link encap:Ethernet HWaddr 00:ac:39:95:a1:16 inet6 addr: fe80::2ac:39ff:fe95:a116/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1786 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:128597 (128.5 KB) TX bytes:468 (468.0 B) Actually, I followed this tutorial to setup the PacketiX VPN on ubuntu. Now, how do I actually use this VPN? Terminal Output: shadyabhi@shadyabhi-desktop:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 shadyabhi@shadyabhi-desktop:~$ As told in tutorial, if I do route del default route add default dev vpn_0 I am not able to surf the internet. And I get the route command output as: root@shadyabhi-desktop:/home/shadyabhi# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default * 0.0.0.0 U 0 0 0 vpn_0 root@shadyabhi-desktop:/home/shadyabhi# I know I am not able to route the traffic properly. How do i do that?

  Read the article

• Get IP or MAC addresses of Windows Multipoint Server 2012 stations?

  - by user1454265

  Is it possible to programmatically retrieve the IP or MAC address of a station assigned to a Windows MultiPoint Server 2012 host, using PowerShell or any other .NET or Windows API? Background: I'm developing a application to help set up USB-over-Ethernet zero clients in a WMS 2012 setup, bridging the PowerShell "WmsCmdlets" module (Microsoft.WindowsServerSolutions.MultipointServer.PowerShell.Commands.Library.WmsStation) and a third-party vendor API for configuring zero client IP address, etc. So far, I do not know any means of matching up the "stations" of the WmsCmdlets with the zero client objects in the vendor's API. Finding out the IP or MAC associated with a WMS station would do nicely, since I have this on the zero client API side. However, I haven't found any information I could use in the PowerShell WmsCmdlets module, such as Get-WmsStation which returns the following: Id : 1 Name : <my station name> IsAutoLogOn : False IsSplit : False CollabId : 0 RemoteConnectionServerName : VirtualMachineName : VirtualMachineId : AutoLogOnUserName : AutoLogOnPassword : DeviceTypes : {DT_Mouse, DT_Keyboard, DT_Audio, DT_MassStorage...} DeviceCounts : {2, 2, 0, 0...} ComputerName : <my WMS host server name> SessionId : 4294967295 SessionHostServer : <my WMS host server name>

  Read the article

• How to enable Ipv6 on my ubunutu 11.04 virtual machine

  - by liv2hak

  I have installed 3 VM's on my PC.(Ubuntu 11.04).I want to setup an IPV6 network to review and test some of the IPV6 tools like NDPMonitor.(monitors ICMP messages of Neighbour Discovery Protocol.) IP v6 addresses are as follows. linux_router - fe80::a00:27ff:fed5:f7e9/64 labhack1 - fe80::a00:27ff:fed2:8bd1/64 labhack2 - fe80::a00:27ff:fed7:2f2d/64 The below commands have been run on both linux_router and labhack1. sudo ip r a 2001:468:181:f100::/64 dev eth0 sudo vim /etc/radvd.conf /file looks like below./ interface eth0 { AdvSendAdvert on; /*means that we are sending out advertisments.*/ MinRtrAdvInterval 5; /*these options control how often advertisments are sent*/ MaxRtrAdvInterval 15; /*these are not mandatory but valueable settings.*/ prefix fe80::a00:27ff::/64 { AdvOnLink on; /*Says to the host everyone sharing this prefix is on the sam local link as you.*/ AdvAutonomous on; /*Says to a host: "Use this prefix to autoconfigure your address"*/ }; }; sudo sysctl -w net.ipv6.conf.all.forwarding=1 I try to do a ping6 -I eth0 fe80::a00:27ff:fed5:f7e9 I get Destination unreachable: Address unreachable.I am not sure what I am doing wrong here.I am a beginner at linux administration.Basically I think I am missing whatever is analogous to physically connecting VM's.Any help that would point me in the right direction would be greatly appreciated.

  Read the article

• Has anyone used tools like (Chef, Salt, Puppet, CfEngine) to configure a 2008 Win Server with Sql?

  - by Development 4.0

  I have been looking into tools to automate the creation of servers. For two different reasons: Production Development machines I love the idea of the immutable server. I have seen the tools demoed and used successfully on *nix boxes running Rails or Lamp etc. Has anyone found a good way to do this in the Microsoft stack? I would like to get in on the fun and create scripts that will install Windows, patch it according to specification, deploy Sql Server create scripts to build out a database and just for fun deploy SharePoint and configure it, and then deploy a SharePoint solution to it. I can get part of the way, install Windows manually, install Sql Server manually, use Powershell to do all the configuration and setup. Install SharePoint and configure part of it, then powershell for the rest of the configuration and deploying a solution. I would love to have the ability to run one script though, or at least one unified process. I can, and have mostly used VM template images and then instantiated them, but the creation of the template is usually a manual step.

  Read the article

• copying folder and file permissions from one user to another after switching domains [closed]

  - by emptyspaces

  Please excuse the title, this was the best way I could think to describe this scenario without an entire paragraph. I am using C#. Currently I have a file server running windows server 2003 setup on a domain, we will call this oldDomain, and I have about 500 user accounts with various permissions on this server. Because of restrictions out of my control we are abandoning this domain and using another one that is more dominant within the organization, we will call this newDomain. All of the users that have accounts on oldDomain also have accounts on newDomain, but the usernames are completely different and there is no link between the two. What I am hoping to do is generate a list of all user accounts and this appropriate sid's from AD on the oldDomain, I already have this part done using dsquery and dsget. Then I will have someone go through and match all of the accounts from oldDomain to the correct username on newDomain. Ultimately leaving me with a list of sids from oldDomain and the appropriate username from newDomain. Now I am hoping to copy the file and folder permissions from the old user from oldDomain to the new user on newDomain once I join the server to newDomain. Can anyone tell me what the best way to copy permissions from the sid to the user on newDomain? There are a bunch of articles out there about copying permissions from user a to user b but I wanted to check and see what the recommended practice is here since there are a ton of directories.

  Read the article

• Improving IO with FlashCache

  - by Devator

  I have a server with 2 HDD's (2x 1 TB), running in RAID 1 (SW-RAID). I want to improve IO performance by using flashcache. There are running KVM virtual machines on it, using LVM. Regarding this, I have the following questions: Will this even work? flashcache works for block devices, however these are all virtual machines with their own setup. How much would I expect to increase performance? Most virtual machines run websites and some host games. How big does the SSD needs to be? Would having a bigger SSD increase performance since it's able to cache more files? What happens if the SSD dies? Would flashcache retrieve files from the traditional HDD and I could simply replace the SSD? How much faster would writeback be in comparison with writethrough and writearound? I have no access to a test system unfortunately, so could I install flashcache on a live server without unmounting the the disks? I found a great tutorial here which I would be using.

  Read the article

• Understanding mail failure notices, 554

  - by goran

  I'd like to confirm the meaining of a mail failure notice. Here's the message Hi. This is the qmail-send program at mydomain.com I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: 1.2.3.4 does not like recipient. Remote host said: 554 <[email protected]>: Relay access denied Giving up on 1.2.3.4 The way I understand this is, that 1.2.3.4 is not setup to receive mail for this domain. dig domain.com MX shows ;; ANSWER SECTION: domain.com. 6245 IN MX 10 mail.domain.com. domain.com. 6245 IN MX 20 mx.anotherdomain.com. (1.2.3.4 is mx.anotherdomain.com.). The puzzling part is that I have reports that messages sent from gmail get delivered to this address. P.S. Is this a proper question for serverfault?

  Read the article

• Explorer.exe not starting after login on Windows Server 2003 (Terminal Services and console)

  - by Pepperoni Icecream

  When users login to a Windows Server 2003 R2 running Terminal Services they have a blank desktop. Upon inspection, explorer.exe is not running. When I login as administrator, using either RDP or to the console, I am having the same issue. I can pull up the taskman and start explorer.exe manually. I have another Terminal Server setup exactly the same way (same apps, settings, GPO, etc . . .) the only difference is we deployed Symantec Endpoint Client 11.0.5 on Friday. For some reason the working Terminal Server is still on 11.0.4, but the suspect server received the 11.0.5 client upgrade. I checked the eventviewer for any relevant explorer.exe entries to no avail. It seems that if SEP is preventing explorer.exe from starting at login it would do the same for the domain admin starting explorer.exe from the taskman. I disabled the SEP client and services on the server and issued smc -stop and tried logging in again. Still no explorer.exe. So I'm not sure if the client upgrade is relevant but it is worth mentioning since that was the last system change. The 2 servers are members of a NLB group. I took the bad terminal server out of the group until the issue is resolved. Actually stopped the host using NLB manager Any help is appreciated.

  Read the article

• What is the correct mail set up for multiple domains on one server?

  - by newmarc

  I have a machine (centos 5) with one external ip address. On that machine I have many virtual hosts with a few different top level domain names and sub-domains under those eg. sub1.domain1.com sub2.domain1.com sub3.domain1.com sub1.domain2.com sub2.domain2.com sub1.domain3.com And so on... Alot of these different sites need to send mail as their corresponding domain (or second-level domain at least). I need to set up DKIM, SPF (but that's handled on the DNS) and rDNS lookup so the mail gets received. As I understand it, you can only have one rDNS entry per machine. I could set up a server for each top level domain, but I'm thinking that'll get expensive. What should I do here? Is there a way to have multiple rDNS lookups on one ip address? How do I setup DKIM signing for multiple domain names on the one machine? Are there any services out there that could handle this for me? Thanks for your help...

  Read the article

• Two audio streams - headphones and speakers

  - by Sylvester

  What I want (this is probably hard for most to answer, as this is a very unique setup) is to have two different streams (this means audio splitter is not an option, as it will still only be one stream) of audio - one through the headphones and one through the main speakers. I can do the audio rerouting using virtual audio cables, however the problem is this: i cannot get both headphones AND speakers to play even just one stream, let alone two seperate ones. using "split front and back audio into seperate streams is not an option, as the actual MB F_PANEL is faulty (nothing to do with the case front panel, just so you know. that works fine) So, first things first. I need it to recognise the headphones as a seperate audio device so that Virtual Audio Cables will detect it and allow me to route the necessary audio to the headphones only. I also need to be able have sound play through speakers and headphones together what i want to achieve overall, is this: have the ENTIRE computer's sounds picked up by VAC, and stream them to Line1. then have Line1 stream to the headphones. that way whatever's being streamed is heard through the headphones, while the entire system sounds (including those not streamed) are played through speakers.

  Read the article

• Comparing Nginx+PHP-FPM to Apache-mod_php

  - by Rushi

  I'm running Drupal and trying to figure out the best stack to serve it. Apache + mod_php or Nginx + PHP-FPM I used ApacheBench (ab) and Siege to test both setups and I'm seeing Apache performing better. This surprises me a little bit since I've heard a lot of good things about Nginx + PHP-FPM. My current Nginx setup is something that is a bit out of the box, and the same goes for PHP-FPM What optimizations I can make to speed up the Nginx + PHP-FPM combo over Apache and mo_php ? In my tests using ab, Apache is outperforming Nginx significantly (higher requets/second and finishing tests much faster) I've googled around a bit, but since I've never using Nginx, PHP-FPM or FastCGI, I don't exactly know where to start PHP v5.2.13, Drupal v6, latest PHP-FPM and Nginx compiled from source. Apache v2.0.63 ApacheBench Nginx + PHP-FPM Server Software: nginx/0.7.67 Server Hostname: test2.com Server Port: 80 Concurrency Level: 25 ---> Time taken for tests: 158.510008 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 ---> Requests per second: 6.31 [#/sec] (mean) Time per request: 3962.750 [ms] (mean) Time per request: 158.510 [ms] (mean, across all concurrent requests) Transfer rate: 181.38 [Kbytes/sec] received ApacheBench Apache using mod_php Server Software: Apache/2.0.63 Server Hostname: test1.com Server Port: 80 Concurrency Level: 25 --> Time taken for tests: 63.556663 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 --> Requests per second: 15.73 [#/sec] (mean) Time per request: 1588.917 [ms] (mean) Time per request: 63.557 [ms] (mean, across all concurrent requests) Transfer rate: 103.94 [Kbytes/sec] received

  Read the article

• Windows XP dual screen problems, user account related

  - by Chris

  I have had this issue with a few laptops now and it looks like it is some sort of user account problem. Specifics of the system are: Dell Laptop Windows XP Pro SP3 Non-domain member computer DLP Projector connected to laptop via VGA I use this setup almost daily to do presentations, always the mirrored display mode where I can see on the laptop monitor the same thing that is displayed on the projector. Today, when I boot up, I get the mirrored display at the login screen, but after I log in, it switches to Extended Desktop (like two desktops side-by-side). Fn+F8 just cycles through all the normal settings except the mirrored display. I created a new user account on the computer and it performs normally. Mirrored display works as normal. I have run into this about 4 times now and it always can be solved by creating a new user account on the computer, and then all is well. I would like to either: 1. Find a way to reset the customized settings for a specific user account which would hopefully make this go away, or 2. Find the specific setting that causes this so that I can easily fix it when the problem comes up. Creating new user accounts is kind of a pain and a easy fix must be out there somewhere.

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >