Search Results

Search found 57327 results on 2294 pages for 'nested set'.

Page 591/2294 | < Previous Page | 587 588 589 590 591 592 593 594 595 596 597 598  | Next Page >

• How do I add client computers to a Windows SBS 2008 domain?

  - by Jonas

  We have a LAN and the router is the DHCP server. We have a server with Windows SBS 2008, it has the IP address 192.168.1.2 while the router has the IP address 192.168.1.1. I have set "DNS Relay" on the router to 192.168.1.2. I have tried to add a client computer to the SBS domain by visiting http://connect from the client computer. But that page doesn't exist. I can visit http://192.168.1.2/ then the default startpage for IIS7 is shown. I'm logged in as a local Administrator on the computer that I tries to add to the domain. How do I add the client computer to the SBS 2008 domain? The router is an D-Link DFL 200, and I have now set the "DNS Relay" to "Use address of LAN interface" instead of a specific IP-address. But it doesn't work.

  Read the article

• How can I automate my Linux computer to power off (and on preferably) under certain circumstances?

  - by Ashimema

  OK, So a little background; I've been using Windows Home Server as a Backup Appliance, Media Server and Share Server at home for some time. I decided it was costing me allot of juice so very early on added the "Lights Out" add-on to ensure it was only running as and when needed. I'm now looking to switch to a Linux based server and I'm looking for a similar tool/set of tools for advanced power management. Now the question; Anyone got any all-in-one suggestions (i.e with client parts for both Windows and Linux and a server part for the Linux server), or can anyone simply verify that I'll need to set-up all the individual bits for this myself separately? (A tool similar to "[SmartPower][2]" but for linux would be a great start)

  Read the article

• Running SQL 2008 on a VM

  - by chris.w.mclean

  We are pondering trying to set up a SQL 2008 instance inside a VM for a production environment. All our SQL instances use iSCSI over gigabit ethernet to talk to a NAS, as would this new instance. Any reason this is a bad idea or any considerations to make this work well? The VM would be running in Xen 5.5 or we could set it up in Hyper-V if there's a compelling case for that. And the VM's VHD would be stored on a different NAS then the SQL storage is on.

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Stupid question: prevent file from being changed under linux

  - by Josh

  Ok. Stupid question. I have forgotten what this is called and without remembering the name the search function on the site and on google is failing me. What's the command under linux to mark a file as "locked"/to prevent any changes from being made to it? I'm not talking about chmod. There's a property that can be set (again the name escapes me at the moment) which prevents even processes running as root from changing a file. What is this called and how do I set it?

  Read the article

• How to restrict ssh port forwarding, without denying it?

  - by Kaz

  Suppose I have created an account whose login shell is actually a script which does not permit an interactive login, and only allows a very limited, specific set of commands to be remotely executed. Nevertheless, ssh allows the user of this account to forward ports, which is a hole. Now, the twist is that I actually want that account to set up a specific port forwarding configuration when the ssh session is established. But it must be impossible configure arbitrary port forwarding. (It is an acceptable solution if the permitted port forwarding configuration is unconditionally established as part of the every session.)

  Read the article

• Configure FTP Server with two different IP addresses on different subnets and separate NICs

  - by Luke

  I have an FTP server that's on a low bandwidth connection. We want to set it up with a second IP address on a much higher bandwidth connection. I set up the second interface with a static IP address on the faster connection. This unfortunately does not work. I can verify that the second IP address works perfectly when I disable the first IP address. What do I need to do to get two separate interface IP addresses on different subnets working on the same server?

  Read the article

• PhpMyAdmin Hangs On MySQL Error

  - by user75228

  I'm currently running PhpMyAdmin 4.0.10 (the latest version supporting PHP 4.2.X) on my Amazon EC2 connecting to a MySQL database on RDS. Everything works perfectly fine except actions that return a mysql error message. Whether I perform "any" kind of action that will return a mysql error, Phpmyadmin will hang with the yellow "Loading" box forever without displaying anything. For example, if I perform the following command in MySQL CLI : select * from 123; It instantly returns the following error : ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '123' at line 1 which is completely normal because table 123 doesn't exist. However, if I execute the exact same command in the "SQL" box in Phpmyadmin, after I click "Go" it'll display "Loading" and stops there forever. Has anyone ever encountered this kind of issue with Phpmyadmin? Is this a bug or I have something wrong with my config.inc.php? Any help would be much appreciated. I also noticed these error messages in my apache error logs : /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open Below are my config.inc.php settings : <?php /* vim: set expandtab sw=4 ts=4 sts=4: */ /** * phpMyAdmin sample configuration, you can use it as base for * manual configuration. For easier setup you can use setup/ * * All directives are explained in documentation in the doc/ folder * or at <http://docs.phpmyadmin.net/>. * * @package PhpMyAdmin */ /* * This is needed for cookie based authentication to encrypt password in * cookie */ $cfg['blowfish_secret'] = 'something_random'; /* YOU MUST FILL IN THIS FOR COOKIE AUTH! */ /* * Servers configuration */ $i = 0; /* * First server */ $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'cookie'; /* Server parameters */ $cfg['Servers'][$i]['host'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = true; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['LoginCookieValidity'] = '3600'; /* * phpMyAdmin configuration storage settings. */ /* User used to manipulate with storage */ $cfg['Servers'][$i]['controlhost'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['controluser'] = 'pma'; $cfg['Servers'][$i]['controlpass'] = 'password'; /* Storage database and tables */ $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin'; $cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark'; $cfg['Servers'][$i]['relation'] = 'pma__relation'; $cfg['Servers'][$i]['table_info'] = 'pma__table_info'; $cfg['Servers'][$i]['table_coords'] = 'pma__table_coords'; $cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages'; $cfg['Servers'][$i]['column_info'] = 'pma__column_info'; $cfg['Servers'][$i]['history'] = 'pma__history'; $cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs'; $cfg['Servers'][$i]['tracking'] = 'pma__tracking'; $cfg['Servers'][$i]['designer_coords'] = 'pma__designer_coords'; $cfg['Servers'][$i]['userconfig'] = 'pma__userconfig'; $cfg['Servers'][$i]['recent'] = 'pma__recent'; /* Contrib / Swekey authentication */ // $cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey-pma.conf'; /* * End of servers configuration */ /* * Directories for saving/loading files from server */ $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; /** * Defines whether a user should be displayed a "show all (records)" * button in browse mode or not. * default = false */ //$cfg['ShowAll'] = true; /** * Number of rows displayed when browsing a result set. If the result * set contains more rows, "Previous" and "Next". * default = 30 */ $cfg['MaxRows'] = 50; /** * disallow editing of binary fields * valid values are: * false allow editing * 'blob' allow editing except for BLOB fields * 'noblob' disallow editing except for BLOB fields * 'all' disallow editing * default = blob */ //$cfg['ProtectBinary'] = 'false'; /** * Default language to use, if not browser-defined or user-defined * (you find all languages in the locale folder) * uncomment the desired line: * default = 'en' */ //$cfg['DefaultLang'] = 'en'; //$cfg['DefaultLang'] = 'de'; /** * default display direction (horizontal|vertical|horizontalflipped) */ //$cfg['DefaultDisplay'] = 'vertical'; /** * How many columns should be used for table display of a database? * (a value larger than 1 results in some information being hidden) * default = 1 */ //$cfg['PropertiesNumColumns'] = 2; /** * Set to true if you want DB-based query history.If false, this utilizes * JS-routines to display query history (lost by window close) * * This requires configuration storage enabled, see above. * default = false */ //$cfg['QueryHistoryDB'] = true; /** * When using DB-based query history, how many entries should be kept? * * default = 25 */ //$cfg['QueryHistoryMax'] = 100; /* * You can find more configuration options in the documentation * in the doc/ folder or at <http://docs.phpmyadmin.net/>. */ ?>

  Read the article

• Connecting desktop computer to the internet through laptop wifi

  - by Josh

  Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• Samba file shares - ownership of folder accessible for 1 group verified by MS active direcctory

  - by jackweirdy

  I have a machine set up to share a folder /srv/sambashare, here's an exerpt of the config file: [share] path = /srv/sambashare writable = yes The permissions of that folder are set at 700 and it is owned by nobody:nogroup at the moment. The problem I face is probably a simple one but I'm fairly new to Samba so I'm not sure what to do. The contents of the share should be accessible to a particular user who will authenticate with domain credentials, checked against Active Directory by kerberos. I haven't got kerberos configured yet as I wanted to test the share as soon as samba was configured, albeit basically, to ensure that it works. I've noticed that I can only access & write to the share when the folder is either owned by the user logging in or made world writable. The key issues are that this folder can't be world writable as it contains sensitive stuff, but at the same time can't be owned by a user or group since they come from the AD server. Anyone know what I should do?

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

• Proxy server on windows with SSL encrypted exchange with client

  - by Syffys

  I want to set up a classic proxy server (HTTPS, HTTPS, SSH, FTP, etc...) on a windows platform, but I need the following features: password authentication for clients data exchanged between clients and server to be SSL encrypted I've been trying to set this up various application to get this result, but without success so far: Squid for windows ccproxy wingate Alternatively, an other solution would be an HTTP SSL tunnel encapsulating an unencrypted proxy connection between clients and the server. I've spent a lot of time without any result so far, so I'm wondering if anyone faced this kind of issue. Thanks in advance!

  Read the article

• How to change defaulp pdf viewer for all users in command line

  - by dodecaplex

  I'm using Debian squeeze with Gnome Desktop for all my users. I have a group of machines to set up so that all users should use xpdf as a default viewer (rather than evince). I want this set up to be done by command line (even better, using puppet). I know about xpg-mime command, but the man page says that the default command should not be used as root. I could manually tweek the /etc/gnome/defaults.list files, but I'm looking for a single command I could run to perform the setting without an editor interaction. Any idea ?

  Read the article

• Setting up a LAN connection in Windows

  - by user30780

  I'm looking to set up a LAN connection under Windows XP. What are the steps or instructions I should follow to make this work?

  Read the article

• How to login without entering username and password

  - by torbengb

  I'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious. I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users. Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways? (I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password. Yes, you're right. But that's not what this question is about. Thanks.)

  Read the article

• Is it possible to hide the SSID of the Windows 7 soft AP

  - by Goro

  I know it is possible to create a sofware AP in windows 7 using command prompt: netsh wlan set hostednetwork ... But is it possible to set such a network not to broadcast its SSID? I realize that this does not gain any security - or may even make the system more secure, but I am not asking about security here. I want to know if it is possible, through the netsh command interface, to hide the SSID. If my client wants to hide the SSID, then I will make them aware of security implications, but in the end it is their decision.

  Read the article

• Automate opening HTML and printing to PDF

  - by craigpatik

  I need a way to automate the following process in Windows 7: Open an .html file in Internet Explorer Print to PDF Save the PDF with a patterned file name (i.e., original_name_YYYY-MM-DD.pdf) Ideally, I could drag and drop several files or open a whole folder of files at once and a PDF would be created for each one. A command line solution is also acceptable. The files have to be opened in the browser because parts of the page are rendered with JavaScript on page load. In other words, if you simply right-click on the file in Explorer and choose "print", the resulting file is not the same because the JS didn't run. If it helps, Internet Explorer can be set as the default browser, and a PDF printer can be set as the default printer.

  Read the article

• Reach self hosted server from LAN

  - by Freefri

  I have a self hosted server with Apache2 pointed with the domain example.com. I have also some virtual servers www.example.com, cloud.examle.com, etc. This server is in my LAN, and when I try to acces to my server within the lan throw www.examle.com y get my router's configuration page. From outside the LAN www.example.com and cloud.examle.com works properly. From inside the LAN 192.168.1.33 (server internal IP) shows the default webpage (www.examle.com), but I can not get cloud.examle.com I also have a LAN name server in 192.168.1.33 with bind9. I set up my gateway 192.168.1.1 with my LAN-NS as primary NS I solve this problem creating a new dns zone in the NS. This are my config files: ;ZONE-1 $ORIGIN . $TTL 86400 ; 1 day home.lan. IN SOA server.home.lan. hostmaster.home.lan. ( 2008080901 ; serial 8H ; refresh 4H ; retry 4W ; expire 1D ; minimum ) home.lan. IN NS server.home.lan. $ORIGIN home.lan. ; Set the address for localhost.home.lan localhost IN A 127.0.0.1 router IN A 192.168.1.1 server IN A 192.168.1.33 mypc IN A 192.168.1.132 ;ZONE-2 $ORIGIN . $TTL 86400 ; 1 day example.com. IN SOA www.example.com hostmaster.home.lan. ( 2008080902 ; serial 8H ; refresh 4H ; retry 4W ; expire 1D ; minimum ) example.com. IN NS 192.168.1.33 $ORIGIN examle.com. localhost IN A 127.0.0.1 www IN A 192.168.1.33 cloud IN A 192.168.1.33 My DNS and my names are working properly now My question are: What do you think about my solution? Can I change the A zone with CNAME to server.home.lan (this is the domain in the LAN to the server)? How can I set a default IP for all my whatever.example.com?

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• Custom Transport Agent: How do I collect NDRs and all other undeliverables in Exchange 2010 from the Postmaster?

  - by makerofthings7

  I'm trying to collect all NDRs in a single mailbox for all invalid recipients, and anything that fails for any reason. I have a custom transport agent, that I've written myself that appears here: [PS] C:\Windows\system32>Get-TransportAgent Identity Enabled Priority -------- ------- -------- Transport Rule Agent True 1 Text Messaging Routing Agent True 2 Text Messaging Delivery Agent True 3 Routing Rule Agent True 4 **** Sometimes when I run get-messagetrackinglog I get failures like this below RunspaceId : 4ecc61fb-13b9-4506-b680-577222c9bf21 Timestamp : 10/14/2013 12:42:42 PM ClientIp : ClientHostname : Exchange1 ServerIp : ServerHostname : SourceContext : Routing Rule Agent ConnectorId : Source : AGENT EventId : FAIL InternalMessageId : 4416 MessageId : <[email protected]> Recipients : {[email protected]} RecipientStatus : {} TotalBytes : 4542 RecipientCount : 1 RelatedRecipientAddress : Reference : MessageSubject : review CGRC due diligence. Sender : [email protected] ReturnPath : [email protected] MessageInfo : MessageLatency : MessageLatencyType : None EventData : How can I collect the NDRs in a single mailbox for review? I have already set the following command but it is of no effect [PS] C:\>set-TransportConfig -JournalingReportNdrTo [email protected] -ExternalPostmasterAddress [email protected]

  Read the article

• virsh console and tty size

  - by pehrs

  I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to connect to the serial interface on a KVM based virtual machine. When I now change the size of the window it does not propagate to the virtual server. This is most easily seen by checking stty -a, which is not updated on the virtual machine when I change window size. This means that line breaks does not work correctly in the terminal and any application that relies on window size for formatting (emacs, man, etc) gets messed up unless the window size on the client matches the default size on the server. A workaround is to manually set the window size to match the client window using stty, but I wonder if there is any way to get this information to propagate and set the window size in the virtual machine automatically.

  Read the article

• block access to certain website types

  - by frustrated teacher

  Need to block access to certain website types without listing each URL to block. Students at secondary school are going to porn sites. Need to be able to block all such access without having to list each possible site URL. Having the Content -- Ratings tab set to None for all categories on the ratings files listed on my computers does not prevent access. Unchecking users may access sites with no rating, even with the security settings set to High, still allows the porn sites to come up. If that is checked, then ONLY listed sites can open and students would not be able to do any research via google, for example. I would rather not have to continue checking each computer and blocking sites as they find them.

  Read the article

< Previous Page | 587 588 589 590 591 592 593 594 595 596 597 598  | Next Page >