Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 592/761 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

• What's the easiest way to move from one Macintosh to another?

  - by schnapple

  Here's the story: Company bought me a $599 Mac mini (as of this writing, 2.26GHz/160GB HD/2GB RAM) I have it set up to some extent with software for development Company decides it needs a second Mac for QA I convince company to buy the $799 Mac mini for the second machine (as of this writing, 2.53GHz/320GB HD/4GB RAM), let me have it for development, and let QA have the $599 Mac mini Company does just that, now I have both So, what's the best way to move from one of these to the other? Just set up everything on the second one and be done with it? Can I transfer things from the first to the second somehow? I'm running Time Machine backups to an external drive on the $599 Mac mini, if that helps. Also both of these will be on the network at the same time, other than renaming one of the machines are there considerations to be had there?

  Read the article

• Log highlighted lines to window in irssi

  - by Sebastian P.

  I usually keep an irssi session running on my server at all times. Often times it also takes me quite a while between remembering that I in fact have it running. Therefore I'd like to know if there's an easy way to log all lines that are highlighted to a custom window, such that I later, when I return, can see what people have said that was directed at me. Most useful would of course be if it logged both nickname, time and place (channel, network) of the message. I've been looking around, and haven't managed to get anything working which accomplishes this, so it would be splendid if such a thing existed.

  Read the article

• "Cannot allocate memory " error whle copying data from window to ubuntu

  - by John

  I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

  Read the article

• Can IP v4 and IP v6 share a single physical Ethernet?

  - by sleske

  I keep reading about the transition from IP v4 to IP v6, and the possible advantages and problems. One thing that keeps popping up is "dual-stack" networking, meaning (I believe) a host can speak both IPv4 and IPv6. I don't quite understand how this works, however. Can a host actually transmit using IPv4 and IPv6 at the same time over the same physical Ethernet (like e.g. HTTP and FTP can be used simultaneously)? Or is the physical network strictly IPv4 or IPv6, with the "other" protocol sent via tunneling?

  Read the article

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

• New whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

  - by Javier Puerta

  IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

  Read the article

• New Whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

  - by Javier Puerta

  IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

  Read the article

• sql server express

  - by neil

  I use MS Acess as the front end. Loaded SQL Server 2008 R2 on my laptop. On my laptop (which I want to run the sql/access locally), there is no drop down listing. Under my normal Network (Sql 2000 enterprise edition) condition, the server name is part of the drop down listing. Finally got an ODBC positive test by manually listing in the system dns ODBC connection 'computername\sqlexpress'. Nonetheless, can not get an ODBC connection from Access. How can I get it working?

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• Ubuntu apt-get install (--download-only) executed from another machine on behalf of mine

  - by Maroloccio

  I have a server on a network segment with no direct or indirect access to the Internet. I want to perform an: apt-get install <package_name> Is there a way to somehow delegate the process of downloading the required files to another machine by exporting the server configuration so as to satisfy all dependencies while running: apt-get install --download-only <package_name> Can, in effect, apt-get install read a configuration from an exported archive rather than from the local package database? Can the list of packages to be downloaded be retrieved, along with an installation script to perform the installation, instead of the actual packages? (a further level of indirection which would help me schedule this with wget at appropriate times...)

  Read the article

• VPN stuck on Verifying Username and Password

  - by user2791

  I'm building a new machine and everything is working correctly, except that I can't log on to my VPN. It hangs at the "Verifying username and password..." step, then returns after about 30 seconds claiming Error 721. I have another machine sitting next to this one with the VPN connection configured exactly the same, connecting just fine over the same wifi network, so I'm convinced that there is no server or firewall problem. The VPN works fine. This machine simply can't connect to it given the correct credentials and configuration. Any suggestions?

  Read the article

• Lots of artifacts while streaming HD content with VLC 0.9.9 on CentOS

  - by Zsub

  I'm trying to stream (multicast) a x264 encoded file using VLC. This in itself succeeds, but the stream has a huge lot of artifacts. This seems to suggest that the data cannot be transported fast enough. If I check network usage, though, it's only using about 15 mbit. I have a similar SD stream which functions perfectly. I think I could improve stream performance by not streaming the raw data, but I cannot seem to get this working. It seems that on keyframes all artifacts are removed for a short while (less than a second). This is the command I use: vlc -vv hdtest.mkv --sout '#duplicate{dst=rtp{dst=ff02::1%eth1,mux=ts,port=5678,sap,group="Testgroup",name="TeststreamHD"}}' --loop Which is all one long line.

  Read the article

• How to configure OpenVPN server to use custom default gateway?

  - by Arenim

  I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

  Read the article

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• Cannot access Nagios Web Interface

  - by Dominiqs

  After successfully installing Nagios core 3.4.1 (i also installed plug-in1.4.11) on our linux rhel 5.3 server i cannot login to the nagios web interface.I am running apache 2.2.3 I am using internet explorer 8 and also firefox 3.6.3 When i try to enter the url http//localhost/nagios/ on a desktop (on the same network as the Nagios server)it does seem to like it but if i try http//x.x.x.x/nagios/ (where x.x.x.x is the IP address of my nagios server) it likes it but then the authentication popup appears after entering the password and username(nagiosadmin) it throws the errors below The server x.x.x.x at Nagios access requires a username and password Warning this server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection) After a few attempts i get error 401 authentication required error from internet explorer ;this server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials or your browser doesnt understand how to supply the credentials required. Help Please anyone..seems like an authentication issue

  Read the article

• Homegroup sharing problems

  - by soandos

  I can see other people in my homegroup and their folders, but when I click on those folders, I cannot see the contents (no error message, just nothing happens). The other people in the Homegroup can see me just fine, and my files In addition, I cannot see the files that they have under the network tab, though they can all see each others stuff. What could be the issue? The homegroup has already be created and recreated numerous times. Perhaps unrelated, but I am unable to turn off password protected sharing.

  Read the article

• How to use proxy on Virtual Box (Windows XP)

  - by John

  I'm not exactly the most tech savy so please bear with me. I am trying to connect through a proxy with my Virtualbox accounts. Initially I wanted to just set the browsers in each virtualbox under a proxy but my boss said that it can probably be done right off the bat under the virtualbox accounts itself. Could anyone guide me on how to do this? All the instructions online state that their should be a proxy setting in preferences however all I see is a Network Adapter tab. Thanks!

  Read the article

• WiFi problems on several Ubuntu installations

  - by Rickyfresh

  Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

  Read the article

• Samba share external USB device

  - by bioShark

  I managed to share stuff from my Ubuntu 12.04 to my private network, and the data is visible from a Windows machine. I even shared a hdd that has windows on it. So everything seems to work fine. When I want to share a mounted device (USB pen drive, USB HDD... etc) however, I get from the Windows machine: Access denied on file \... I realize that this is due to the missing rights on the mounted folder. By default a mounted folder gets the equivalent of 700 : drwx------, and the owner myself. But, I can't seem to change the rights on the external device... they remain 700. Is there a special trick I need to do in order to share NTFS mounted usb devices? Thanks P.S. from this Question I see that NTFS devices can not be shared....is this true? It's a bit strange, because I have in my PC 2 HDD's with 3 NTFS partitions, and I can share them without a problem.

  Read the article

• 'Unlimited' free trial of Windows Server 2008 by deleting and reinstalling VM? [closed]

  - by MrVimes

  I am using Virtual Machine software (VirtualBox) to learn Windows Server 2008 R2 Network Infrastructure (70-642). Trouble is - I'm learning at an extremely slow pace and so the trial periods of my virtual machines are close to running out. If I delete the VMs then install WS2008R2 from scratch on new VMs is that violating the acceptable use policy of Microsoft? I am aware that I can extend the trial, but it seems I can only do that by 10 days at a time. Also I think having to re-install from scratch is a good way to reinforce the knowledge.

  Read the article

• ZFS on top of iSCSI

  - by Solipsism

  I'm planning on building out a file server using ZFS and BSD, and I was hoping to make it more expandable by attaching drives stored in other machines in the same rack via iSCSI (e.g., one machine is running ZFS, and others have iSCSI targets available to be connected to by the ZFS box and added to zpools). Looking for other people who have tried this has pretty much lead me to resources about exposing iSCSI shares on top of ZFS, but nothing about the reverse. Primarily I have the following questions: Is iSCSI over gigabit ethernet fast enough for this purpose, or would I have to switch to 10GbE to get decent performance? What would happen when one of the machines running iSCSI targets disconnects from the network? Is there a better way to do this that I just am not clever enough to have realized? Thanks for any help.

  Read the article

• Internet sharing over LAN on Windows Server 2012

  - by USER

  I have a DSL modem connected to a server (ON NIC1) running Windows Server 2012 and 7 computers (running Windows 7 32-Bit) connected to a server though a network switch (ON NIC2). I shared the internet connection from the server through DHCP so I am able to access the internet from those 7 computers, but I am unable to: Access Google.com Activate Windows Update Windows An error is arising that says UNABLE TO ACTIVATE WINDOWS Activation Error Code: 0x80072EE2 Firewall and Anti-Virus are off on both the Server and the Clients. Is there is any additional setting that I want to do?

  Read the article

• DHCP server inside a virtual machine can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• QNAP TS-419p as a VPN Gateway?

  - by heisenberg

  Hello, I am hoping one of you might be able to help. I want to make files stored on shared folders on a QNAP TS-409p available to users over a VPN link. How is the possible? Can someone explain what I need to do. What do I need to do at the router and what do I need to do on the QNAP NAS? Effectively, what I want do do is use the built in Windows vpn client to connect to my home network and then be able to browse the shared folders. Thanks in advance.

  Read the article

• Multiple iSCSI Targets or 1 that's shared?

  - by Joost Verdaasdonk

  On my network I have several types of files I want to save on a SAN like: SQL db's and logs Exchange data Random files Now I'm wondering if I should create one iSCSI Target with a large volume and initiate that from one of the servers. (and share it so other servers can use it too) Or I should create separate Targets to have each server use its own storage. For the record the storage could be separated because the servers aren't using the shared data. For one reason I was thinking of one storage is ease of backup. (but perhaps performance could be a problem?) What would be an advisable configuration for these type of data?

  Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >