Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 594/761 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• Ubuntu 11.04 Static IP doesn't take

  - by mrduclaw

  I'm trying to set a static IP address in Ubuntu 11.04. I did a server install. I edited my /etc/network/interfaces file to include: auto eth0 iface eth0 inet static address 10.0.0.100 netmask 255.255.255.0 gateway 10.0.0.1 When I do a /etc/init.d/networking restart this appears to take. After awhile though, that 10.0.0.100 will turn into something dished out by the DHCP server. My problem appears to be similar to this: Ubuntu intrepid - static IP networking keeps restarting with DHCP But I don't have Gnome installed. Is there anything else that's running in the background that could be doing this? And if so, how do I disable it?

  Read the article

• Routing DHCP traffic over the internet

  - by rmanna

  i'd like to know if it's possible for the internet to be between a DHCP server and the network it's "assigned" to? so basically, something like this: -------------- ------------- ------------- | DHCP Server | | DHCP | | Clients | | |-----Internet-----| Relay Agent |------| 192.168.0.* | | | | 192.168.0.1 | | | -------------- ------------- ------------- the behavior i'm seeing is that the DHCP server is offering 192.168.0.* IPs and sending them back to 192.168.0.1, which it can't reach. i tried masquerading the packets sent by the relay agent but that doesn't seem to work. from what i've been reading, this is normal behavior since the DHCP server uses the GIADDR as the destination address for its OFFERs, and not the actual source IP of the packets it receives from the relay agent. sooo, given that my DHCP server needs to be "on the other side of the internet" as depicted above, how can i get this working? are there settings for dhcpd to do this or is creating a VPN containing the DHCP server and the relay agent the only way? thanks!

  Read the article

• ZFS on top of iSCSI

  - by Solipsism

  I'm planning on building out a file server using ZFS and BSD, and I was hoping to make it more expandable by attaching drives stored in other machines in the same rack via iSCSI (e.g., one machine is running ZFS, and others have iSCSI targets available to be connected to by the ZFS box and added to zpools). Looking for other people who have tried this has pretty much lead me to resources about exposing iSCSI shares on top of ZFS, but nothing about the reverse. Primarily I have the following questions: Is iSCSI over gigabit ethernet fast enough for this purpose, or would I have to switch to 10GbE to get decent performance? What would happen when one of the machines running iSCSI targets disconnects from the network? Is there a better way to do this that I just am not clever enough to have realized? Thanks for any help.

  Read the article

• WiFi problems on several Ubuntu installations

  - by Rickyfresh

  Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

  Read the article

• Systray stretching out for no reason.

  - by MrStatic

  I just restored my Windows install back to a previous state with Macrium. For some odd reason it is now stretching out my systray up to halfway across my taskbar. Any ideas why? No it did not do this 6 months ago when I took the image or anytime after that when I was using it. This is in Windows 7x64. The blank area seems to be filled with blank icons because if I place the mouse anywhere in the blank area the systray will slide over by about 1 icon's width. The missing icon between the battery and the volume is I assume my network icon. Not sure why that is missing as well.

  Read the article

• multi-thread in mmorpg server

  - by jean

  For MMORPG, there is a tick function to update every object's state in a map. The function was triggered by a timer in fixed interval. So each map's update can be dispatch to different thread. At other side, server handle player incoming package have its own threads also: I/O threads. Generally, the handler of the corresponding incoming package run in I/O threads. So there is a problem: thread synchronization. I have consider two methods: Synchronize with mutex. I/O thread lock a mutex before execute handler function and map thread lock same mutex before it execute map's update. Execute all handler functions in map's thread, I/O thread only queue the incoming handler and let map thread to pop the queue then call handler function. These two have a disadvantage: delay. For method 1, if the map's tick function is running, then all clients' request need to waiting the lock release. For method 2, if map's tick function is running, all clients' request need to waiting for next tick to be handle. Of course, there is another method: add lock to functions that use data which will be accessed both in I/O thread & map thread. But this is hard to maintain and easy to goes incorrect. It needs carefully check all variables whether or not accessed by both two kinds thread. My problem is: is there better way to do this? Notice that I said map is logic concept means no interactions can happen between two map except transport. I/O thread means thread in 3rd part network lib which used to handle client request.

  Read the article

• TPM had to be reintialized: Does a new recovery password have to be uploaded to AD?

  - by MDMoore313

  Some way some how, a user's machine couldn't get read the bitlocker password off of the TPM chip, and I had to enter the recovery key (stored in AD) to get in. No big deal, but once in the machine, I tried to suspend bitlocker per recovery documentation, and got an error message about the TPM not being initialized. I knew the TPM was on and activated in the BIOS, but Windows still made me reinitialize the TPM chip, and in the process it created a new TPM owner password. I found that odd because it prompted me to save this password or print it (there wasn't an option not to), but it made no reference of a recovery password, nor did it back this password up to AD. After the user took her laptop and left I started thinking that if the TPM password change, does the recovery password change also? If so, that new recovery password will need to be uploaded to AD, but MS' documentation doesn't make that clear, and doesn't back up the new recovery key (if one exists) to AD automatically when the group policy says it must, and from a network standpoint AD is accessible.

  Read the article

• Routing / binding 128 to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Thank you

  Read the article

• Simple way to get keys/mouse buttons working in Synergy (mac client, pc server)

  - by Damon

  I'm trying to get Synergy working running as client on my Mac with SynergyKM Preferences panel. It's performing generally fine (just some real slow downs when my network is under heavy use, usually from youtube videos). The main thing I want to get working is none of the special buttons on my mouse are working on the client.. just the scroll and middle click.. but I have back/forward buttons I'd like to have working. Also my Windows Comfort Curve Keyboard has some extra keys and I'd like to know how to set those up to perform operations on my Mac client. I could have sworn that home/end weren't working but they seem to be now.. perhaps it's application specific..

  Read the article

• VPN stuck on Verifying Username and Password

  - by user2791

  I'm building a new machine and everything is working correctly, except that I can't log on to my VPN. It hangs at the "Verifying username and password..." step, then returns after about 30 seconds claiming Error 721. I have another machine sitting next to this one with the VPN connection configured exactly the same, connecting just fine over the same wifi network, so I'm convinced that there is no server or firewall problem. The VPN works fine. This machine simply can't connect to it given the correct credentials and configuration. Any suggestions?

  Read the article

• Could not use domain name instead of static IP

  - by Nam Gi VU

  Hi, I'm working with some partners in the UK. My office is in Vietnam. We are having a network problem: My partner can access an internal website using the domain name, e.g. http://website.name, but I can only access that website using the direct IP, e.g. 192.168.1.85. I can not ping that web server using "ping website.name" but it works if I using "ping 192.168.1.85". I want to use the domain name. Please help.

  Read the article

• Import EML emails into Outlook 2010 64-bit

  - by nness

  Evening everyone. I'm helping setup a small office network, where a number of old PC's are being replaced with new ones with a 64-bit copy of Outlook 2010. The old emails were stored in Windows Live Email, and were exported as .eml files (since we were replacing the machines). All the support I can find indicates that .eml files could simply be dragged-and-dropped into a folder in Outlook 2010, and it will import them correctly. However, it seems this is not the case in the 64-bit versioin, where dropping in .eml files results in a new message being created with these files as attachments. We can re-download the most of the emails off the server if need be, but there were user folders which were not on the server which we were hoping to import. Any advice would be fantastic at this point!

  Read the article

• Error 800 while connecting to VPN

  - by Aamir

  I am trying to connect to my office network through VPN. It used to work fine earlier but now as soon as I hit connect, I get Error 800: Error 800: Unable to establish VPN Connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. I am using Windows XP and I am able to ping the VPN server successfully. I have Symantec Endpoint Protection installed (if it matters). I have tried disabling it as well but nothing changes.

  Read the article

• Why do people tell me not to use VLANs for security?

  - by jtnire

  Hi Everyone, As per title, why do people tell me not to use VLANs for security purposes? I have a network, where a have a couple of VLANS. There is a firewall between the 2 VLANs. I am using HP Procurve switches and have made sure that switch-to-switch links accept tagged frames only and that host ports don't accept tagged frames (They are not "VLAN Aware"). I've also made sure that the native VLAN (PVID) of the trunk links are not the same as either of the 2 host VLANs. I've also enabled "Ingress Filtering". Furthermore, I've made sure that host ports are only members of a single VLAN, which is the same as the PVID of the respective port. The only ports which are members of multiple VLANs are the trunk ports. Can someone please explain to me why the above isn't secure? I believe I've addressed the double tagging issue.. Thanks

  Read the article

• Change Scan-to-PC list names on Brother MFC-8890DW Printer

  - by dralezero

  I have two Brother MFC-8890DW. When scanning over the network, it shows a list of PCs (on the scanner display) to save to that have the software/drivers installed. Each PC is listed as the name of the employee for that computer. I have setup a third MFC-8890DW and installed on these computers. The list, however, is the computer name. Somehow it is possible to customize the name. Brother support did not know. I couldn't find anything in manuals. I thought I remember setting up those names before.

  Read the article

• Access server bound to localhost:5000 from different computer

  - by Jesse

  I am working on a web application using the Pylons framework. The web server is binding to localhost:5000 so I am able to access my application by going to localhost:5000 in my browser. I would like to be able to access the server from another computer on the same network. The computer that is hosting the server and application is running Mac OSX and the computer I would like to be able to access the application is running Windows 7 (I have cygwin with SSH installed as well as PuTTY). I could work around this by binding to the host name of the computer but would rather leave it running only on localhost. I was thinking I could do something with SSH tunneling but have not had any luck so far. Any ideas?

  Read the article

• Windows 7: How to enable firewall disabled by global policy on a computer joined to a domain?

  - by kzen

  On a Windows 7 Enterprise 64-bit laptop joined to a corporate domain, the Windows Firewall is disabled by a global policy. Is there any way to enable the Windows Firewall in this scenario? The gpedit.msc setting Windows Firewall: Protect all network connections is inaccessible. EDIT: It appears that changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\gpsvc\Start value to 4 will disable the GPO and allow you to start the firewall and stop the bots from pushing cr*p to your computer... will check on Monday and if it works I'll confirm here in case someone else in my situation wonders upon this question... EDIT: It's probably better if I write a mock windows service not doing anything and name it according to what is expected to be on my box and than crete mock McCrappy executable and mock McCrappy folder structure and remove all the actual stuff... That would take a little time but would most certainly make my box completely stealthy...

  Read the article

• Can't get port forwarding to work on Ubuntu

  - by Znarkus

  I'm using my home server as NAT/router, which works well. But now I'm trying to forward port 3478, which I can't get to work. eth0 = public interface eth1 = private network $ cat /proc/sys/net/ipv4/conf/eth0/forwarding 1 $ cat /proc/sys/net/ipv4/conf/eth1/forwarding 1 Then to forward port 3478 to 10.0.0.7, I read somewhere that I should run iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 3478 -j DNAT --to-destination 10.0.0.7:3478 iptables -A FORWARD -p tcp -d 10.0.0.7 --dport 3478 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I also ran ufw allow 3478 But testing port 3478 with http://www.canyouseeme.org/ doesn't work. Any idea what I have done wrong?

  Read the article

• Netgear WNDR3700 2.4GHz and 5GHz Wi-Fi are segregated

  - by Tim Sullivan

  I have a Netgear WNDR3700 with both the 2.4GHz (B/G/N) and 5GHz (A/N) broadcasting. I'd assumed that devices connecting on either channel would work together without issues, but there are some devices (such as my iPhone 4 or HP wireless printer) that will only connect at 2.4GHz, and some that connect at 5GHz. However, it seems that they're segregated on the network, so a computer at 5GHz can't print to the printer, but the iPhone can. This is causing issues not just with printing, but with AppleTV and so on. Is there a way to have the router let these devices all talk to each other?

  Read the article

• Cannot access Nagios Web Interface

  - by Dominiqs

  After successfully installing Nagios core 3.4.1 (i also installed plug-in1.4.11) on our linux rhel 5.3 server i cannot login to the nagios web interface.I am running apache 2.2.3 I am using internet explorer 8 and also firefox 3.6.3 When i try to enter the url http//localhost/nagios/ on a desktop (on the same network as the Nagios server)it does seem to like it but if i try http//x.x.x.x/nagios/ (where x.x.x.x is the IP address of my nagios server) it likes it but then the authentication popup appears after entering the password and username(nagiosadmin) it throws the errors below The server x.x.x.x at Nagios access requires a username and password Warning this server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection) After a few attempts i get error 401 authentication required error from internet explorer ;this server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials or your browser doesnt understand how to supply the credentials required. Help Please anyone..seems like an authentication issue

  Read the article

• LDAP loginShell on platforms with different paths

  - by neoice

  I'm using LDAP to deal with users and authentication across my network. I'm now adding FreeBSD hosts and have hit a problem with login shells. on Linux, shells tend to be in /bin/$shellname, so setting my login shell in LDAP to /bin/zsh works perfectly. on FreeBSD, /bin/zsh doesnt exist, I need to use /usr/local/bin/zsh. is there a solution to this? I imagine I might be able to make some sort of login-shell.sh script that LDAP passes out as the "shell" and then use the script to determine the actual shell for the user, but I'm not a fan of that idea. I'm using Debian and FreeBSD, both with a standard OpenLDAP/PAM/nss setup. edit: it looks like using /bin/sh and adding an exec $shell to .profile would "work", but that doesnt scale very well.

  Read the article

• What is the "real" difference between a NAS and NFS? Or, why pick a NAS device over "mere" NFS?

  - by warren

  From an end-user perspective, what is the difference between a NAS device and using NFS exports from a file server? They seem to accomplish the same end result. The difference between a SAN and other file storage is related (in my experience) to how they are connected to the server infrastructure. However, the difference between a NAS, connecting over a standard ethernet port, and NFS (sharing storage off specific servers, also over the network), seems more nebulous. Is there a good reason to pick a NAS filer over just running NFS on servers?

  Read the article

• DNS issues on my iPhone

  - by mattalexx

  I'm trying to call up "https://m.google.com" on my iPhone on my home WiFi. It's saying Safari "cannot verify server identity" of m.google.com, then when I press Details, it refers to https://m.google.com as "mattserver". "mattserver" is the name of my development server, a Linux box on my home network. This stinks of DNS issues to me. Accessing the unsecure version of that URL ("http://m.google.com") gives me a blank page. What could be going on here? Is there a way to look at the logs of my router somehow?

  Read the article

• Error page for OWA users on a different server?

  - by W_P

  We are getting ready to do a network-wide upgrade to Exchange 2010. The url for the old 2007 mailboxes is at https://mail.example.com and users who have had their mail box moved will have to go to https://Email.example.com If a user that has a 2010 mailbox attempts to login at the 2007 OWA location, they get a standard 403 Forbidden page. We would like to show them a page of our own making, that includes a link to the 2010 OWA login page. I assumed we could do this with an IIS Custom Error page, but setting the 403.4 error page in IIS on the Default web site doesn't seem to be working. Does anyone know how we could get around this? BTW, our OWA for the 2007 boxes in on Windows Server 2003, and IIS 6

  Read the article

• Yum through http proxy

  - by eodchop

  I have several Fedora 13 servers that have to connect through an http proxy for yum updates. All port 80 traffic has to be routed through this proxy. I have setup the proxy server in the network settings GUI. I can browse the internet just fine. I have also setup my proxy information in /etc/yum.conf as follows: proxy=http:proxy.largecorp.corp/accelerated_pac_base.pac proxy_user=user proxy_password=password I then added the export HTTP_PROXY="http:proxy.largecorp.corp/accelerated_pac_base.pac" to /etc/bashrc and sourced the file. When i run yum update: Loaded plugins:presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) fro repository: fedora. Please verify its path and try again. All of the repo urls are the defaults, as this is a fresh install.

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >