Search Results

Search found 56140 results on 2246 pages for 'super computer'.

Page 592/2246 | < Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >

• Can't ping devices by IP address for devices allocated IPs by DHCP

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The Domain Controller/DNS server is a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. The network has been set up for a couple of years and usually works fine. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. The router UI shows that the laptop has a reserved IP allocated via DHCP. All machines either have a static or DHCP allocated IP on the 192.168.0.* subnet. Router - 192.168.0.1 - Static - Wired Windows Domain Controller - 192.168.0.8 - Static - Virtual Windows 7 Workstation - 192.168.0.200 - DHCP Auto - Wired VMWare ESXi Host - 192.168.0.201 - Static? - Wired iPhone 1 - 192.168.0.202 - DHCP Auto - WiFi iPhone 2 - 192.168.0.203 - DHCP Auto - WiFi Windows Vista Laptop - 192.168.0.204 - DHCP Reserved - WiFi Using the Windows 7 machine (200), I try to ping each machine and the only DHCP machine that responds is itself. The other DHCP machines fail with Reply from 192.168.0.200: Destination host unreachable.. Using nslookup fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the Windows 2000 Domain Controller (8), I try to ping each machine and the only DHCP machine that responds is the Windows 7 machine (200). Pinging the other DHCP machines fails with Request timed out.. Using nslookup also fails with *** domain.controller.name can't find 192.168.0.203: Non-existent domain. Using the iPhone 2 (203), I try to ping (Network Ping Lite) the machines with static IP addresses and that works fine. When I try to ping the Windows 7 machine (200) it is unable to get a response. How do I configure the DNS server/Windows Domain/Router properly so that the Windows Domain machines can see the IPs allocated via DHCP?

  Read the article

• How can I get the MAC address from my stolen laptop so the police can trace it?

  - by Ayman

  A week ago my HP Mini 110 was stolen. I reported to the police and they asked me about my Laptop's MAC address, which I don't know or had never heard about before. Is there any way to get the MAC address of my stolen laptop, as I have all the docs that prove my ownership of the laptop? I've contacted HP to give me the MAC address, but they told me that it should be taken from the set itself and they can't help.

  Read the article

• What things should I run daily, weekly, monthly on my Windows machine?

  - by Jitendra vyas

  What things should I run daily, weekly, monthly on my Windows XP machine? De fragmentation Scan-disk Full system scan Disk clean up Trojan checker malware remover or any other thing... And should I run all these things in Safe-mode always? I want to perform all mentioned things automatically at night. How to set schedule and What would be the best plan? For daily weekly and monthly? I've 300 GB SATA HDD with 6 partition. I would like to know in above mentioned list: Which process should I run daily? Which process should I run weekly? Which process should I run on monthly basis How to set schedule for all in Windows task scheduler?

  Read the article

• iPod OS version, Xcode version and Mac OS X version

  - by user36089

  Hello everyone My Mac OS X version is 10.5.8 Xocde 3.1.4 I hope to debug my app on the iPod Touch iPod OS version 3.1.3(7E18) Organizer told me that I need newest Xcode. I downloaded and try to install the newest Xcode, but it told me I need new Mac Os X. So I clicked my Mac mini's software update to check if there is new version. It told me my softwares are newest. Welcome any comment Thanks interdev

  Read the article

• WYSIWYG editor for structured text (suitable for SVN versioning)

  - by chris_l

  I'm looking for an open source cross platform WYSIWYG editor that I can use to write documentation. I'm not looking for a web based solution - i.e. it should work without a web server, and I want to save my files directly to disk. The result could be any structured format, like Wiki markup, ReStructuredText, DocBook, or a small subset of HTML, ... But it's important, that Subversion diff can be used to see differences between the versions easily (this wouldn't work with .odt or .rtf files for example) I'm currently thinking about using Open Office, and saving the files as HTML, but is there a better solution?

  Read the article

• self signed ssl in windows

  - by Jan

  I installed a self-signed ssl in a windows server. what should i do on the client so that they can establish a secure connection without any warning messages?

  Read the article

• How can I get my routers to forward ports correctly?

  - by Giffyguy

  My network currently looks like this (simplified): Note that Router #2 is connected to the LAN interface of Router #1. This should be familiar to anyone who has seen a standard static-IP setup with an additional firewall for a residence or other small building. Router #1 is actually my cable gateway, but since it is a fully functional router/firewall, I am going to refer to it as a router. Now, I need to open various ports in both firewalls for incoming communication to my server - port 80 is a good example. So I've opened up port 80 in Router #2, and so far all incoming traffic at the public IP X.X.X.129 is being routed correctly. The problem is that I also need my server to respond to incoming traffic at the public IP X.X.X.130 on the WAN interface of Router #1. Naturally, I can't just tell Router #1 to forward port 80 to another public IP. Port forwarding is only supported when the traffic is being directed to the LAN subnet. I am willing to restructure my network topology if required, with the following conditions: Router #1 cannot have its WAN IP reassigned - X.X.X.130 is mandatory. Router #1 cannot be moved or disconnected from the cloud. The server cannot be given a second IP address. I would prefer the server to have a private IP address - e.g. 10.0.0.10 I'd like to keep Router #2, but it can have a private IP - e.g. 10.0.1.10 Following these rules, I need to get my server to receive incoming traffic on port 80 from both public IP addresses. Does anyone on SU know if this is possible? So far my only theories have been to set up a static route on either router, or to somehow combine my two subnets into a single subnet.

  Read the article

• How to disable the second partition without unmount it in Mac?

  - by bagusflyer

  I've installed OSX Yosemite in another partition in my Mac. But there is a problem. For example, I installed iBooks in both partition. When I right click one of my epub or pdf file, both iBooks are shown in my context menu. This is not what I want. What I want is to only allow the apps in Yosemite shown. Of course I can disable apps in my old Maverick partition by unmount the volume. But again this is not what I want because it will hide the partition when I boot my machine so that I can't boot up into my Maverick partition. Can anybody advise if there are any better ideas? Thanks

  Read the article

• Installing windows 8 on windows 7

  - by ZainShah120

  I had windows 7 installed on my Laptop,I installed windows 8 on it, without formatting the System Drive,Therefore now I can see two folders windows.old and Windows,The windows folder contain my new Windows 8, IS there any way that I can go back to Window 7? without formatting, This question is not programming related but I hope I can find some good answers here, If someone think that it is not fruitful, please comment on it, and I will delete that instead of down vote.. Looking forward to hear from you Thanks

  Read the article

• How to make a 100% UNIQUE dvd? [closed]

  - by sajawikio

  Is it possible to make a DVD which would be next to impossible to replicate exactly even with special equipment? To be clear, not in the sense of making the data itself resistant to piracy - nothing like that. More like as an analogy to antiques - a reproduction of a furniture would be able to be spotted to a trained eye, that it is not the original. Is it possible to do this for a dvd? Like, say a dvd is copied, even by someone who is trying to use even special equipment and is hypothetically dying to copy the dvd exactly for whatever reason - even such copied dvd would be detectable that it is not exactly the original dvd somehow (as if it were a reproduction of an original antique, but not the original), and would be almost or even preferably impossible to actually copy 100% exact the dvd ever again. Just some ideas below on the sort of thing i might go about doing to do this, but really am not sure how or what programs, media, hardware, etc. would do the trick Not sure what would do the trick -- but for instance do there exist any blank dvd's that already come pre-recorded with some sort of serial number or bar code, or other metadata, or an encrypted hash, or something like that? Maybe any blank dvd will do but i should get a special software to extract hardcoded metadata? If so which software? Or special hardware even maybe? Such dvd which the "secret" can be: Well, to know what the "secret" is and if it is present on the disk, it probably should be readable by some software or maybe a particular hardware (i guess preferably only if some sort of key is known and input into the software, even better, only then such secret data on disk can be read, otherwise nothing shows up and it looks like just a regular disk with no secret on it), and Would be impossible to actually replicate, especially not with regular burning hardware and preferably not at all. Other idea: Is there any special software that can direct the write head of laser to physically "mar" the dvd in such a way that, when played in dvd player, makes a particular visual pattern or something like that, also say the mar itself shows up as faint scratch on disk, but would be impossible for someone to do themselves exactly? EDIT: Also to clarify suppose the dvd contains video and music that should be playable on dvd players, maybe a menu too (i.e not a dvd containing software), and also to clarify the question is about how to make dvd 100% unique, not how to make the actual content of dvd protected from "piracy".

  Read the article

• Getting GTalk and Alt-Tab to play nice

  - by Steve Armstrong

  I'm running GTalk on Windows 7, and it refuses to work properly with Alt-Tab. Let's say I've got 2 message windows open (msg1 and msg2) and the contact list, as well as Firefox. Alt-tab from Firefox to msg1 works, but now the contact list is the most recent thing in the alt-tab list (not Firefox as expected). Then there's the problem that I can't use alt-tab to select a specific message window, and when switching back to msg2 (showing msg2 in the alt-tab window) it might switch back and have focus on msg1. I found this thread complaining about the same problem, but it's over a year old, and I'm hoping some progress has been made.

  Read the article

• How to create a Linux distribution

  - by Koning Baard XIV

  Are there any tutorials/books which help you get started creating a Linux distribution? I can't really find one on the internet. It does not need to have a GUI. Thanks in advance.

  Read the article

• Make Google chrome with specific user profile as default browser

  - by Kaushik Gopal

  Is it possible to set Google chrome with a custom user profile as the default browser? When I set google chrome as the default browser, it picks the "default" user profile as against the custom one I have setup. I tried setting google chrome as default browser after opening it from that particular user profile, but it doesn't seem to have an effect. I googled around but could only find another poor soul like myself who asked a similar question here: http://www.google.com/support/forum/p/Chrome/thread?tid=69f0a6e776ceab1c&hl=en There weren't any responses to that question. Cheers.

  Read the article

• Displaying Unicode on Chrome vs Firefox

  - by abel

  Unicode Rendering: Firefox vs Chrome OS: Windows XP SP3 My question is about the rendering of this post on Firefox vs Chrome. I can see a lot of boxes on Chrome, not so much on Firefox. Firefox: Chrome: What do I do? Update: Update 2 Changed Sans Serif fonts on Chrome to Arial Unicode and restarted Update 3 This is inspired by @Arjan's references The smilies on Firefox(The reference smilies are the ones below) The smilies on Chrome(The reference smilies are the ones below) Update: The source of the above post is displayed as below Firefox Chrome

  Read the article

• Keyboard's media keys are blocked by a program

  - by Mike Hanson

  I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

  Read the article

• Cannot make BartPE CD - how restore DriveImageXML image?

  - by CChriss

  I have a Windows Vista laptop that won't boot at all. On the D: drive I have DriveImage XML images of C: drive, but I don't have a BartPE boot CD and I don't have a Vista install CD. How can I image the C: using the images on D: if I can't make a BartPE CD because I can't boot to Windows? Is there a BartPE (with DriveImage XML plugin) iso I can download from somewhere, or what can I do? Thanks.

  Read the article

• Windows 8 permissions vs Windows 7 [closed]

  - by Saturn2888

  Possible Duplicate: How do I disable administrator prompt in Windows 8? When I upgraded from Windows 7 Pro 64-bit to Windows 8 Pro 64-bit, I noticed some permissions issues extremely problematic to my using the OS. When running Windows 7 or Vista with UAC off, I was able to navigate around the filesystem as if I was on Windows XP and prior such that I didn't have to run as administrator and could copy and edit files wherever I wanted. In Windows 8, turning off UAC no longer does this. Does anyone know how to get Windows 8's permissions to act like Windows 7 and Vista when UAC is disabled? NOTE: I did a clean install on my laptop with Windows 8, and it has the same issues.

  Read the article

• Programmer Desk

  - by Jim

  I'm building a home office and looking for the ultimate desk. Lot's of resources about the great desk chairs, but very little on great modern desks. Requirements: $1000-$2000. Straight. No side cabinets. Attractive. Electric adjustable would be nice, but I haven't found very attractive looking one. The one recommended in this thread is pretty ugly http://www.beyondtheofficedoor.com/adjustable-height-table.php The Herman Miller Sense desk looks nice: http://www.csnofficefurniture.com/asp/superbrowse.asp?clid=32&caid=&sku=HML1212&refid=PG7-HML1212 . Big fan of Herman Miller after my Aeron and Mirra. Does anyone have any experience with their desks? EDIT: Thanks all for the advice. I ended up just going with the Galant after seeing it and the Herman Miller's in person. What a great desk!

  Read the article

• How do I diagnose a bottleneck in an Intel Atom based Ubuntu server?

  - by Jon Cage

  I have a small media server at home which has software raid and a gigabit link to the rest of my network. For some reason though, I only get ~10MB/s transfers when copying to/from the server. I use software RAID5 (mdadm) over 4 1TB disks. On top of that I then use LVM to give me a huge pool of disk space which is then split up into multiple partitions which can be resized as and when they need it. I'm guessing this it most likely the cause, but I'd like to know for sure where the root cause is. So, how can I benchmark network throughput (Windows 7 desktop <- Ubuntu server) and hard disk performance to try and identify where my bottleneck might be? [Edit] If anyone's interested, the motherboard is an Intel Desktop Board D945GCLF2. So that's a 300 series Atom processor with the Intel® 945GC Express Chipset [Edit2] I feel like such a fool! I just checked my desktop and I had the slower of the two onboard NICs plugged in so the server is probably not at fault here. Transferring a copy of ubuntu off the server I get ~35-40MB/s according to Windows 7. I'll do those HD tests when I get a chance though (just for completeness).

  Read the article

• Fast way to search stackoverflow.com using google

  - by eSKay

  Everytime I have to search something on stackoverflow.com using Google I have to type the rather long <search term> site:stackoverflow.com Is there some way to speedup the process, so that I need not type the whole 23 characters of site:stackoverflow.com each and every time? I am using Google Chrome.

  Read the article

• How to stop middle button in page from trying to open whatever is in my clipboard in Firefox on Ubun

  - by therefromhere

  In Firefox on Ubuntu, if I middle-click anywhere on a page that's not a link, it seems to treat whatever text is in the clipboard as a URL and tries to load it. This is annoying, since if I either accidentally click the middle button or (more often) miss a link when trying to middle-click it, I'll either go to whatever URL is in my clipboard or get an alert saying: The URL is invalid and cannot be loaded Is there any way of either: a) Disabling this functionality so that middle-click on a non-link does nothing (maybe an about:config setting?, or b) Making the functionality more intelligent, so that it will only try and open text if it looks like a URL (this seems like a job for a plugin).

  Read the article

• adding keyboard shortcuts for OSX terminal or xterm

  - by I J

  Is there a way to add a keyboard shortcut for a terminal command in OSX. Basically most of the times i open the terminal app in MAC in order to ssh into a certain server foo. What I want to do is add a keyboard shortcut (say ^k) so that on a terminal when I do that, it runs "ssh foo" in the terminal. Thanks PS: I think if there is something for the xterm in linux then it should work for the terminal too. So this might not be an OSX specific question. PS2: I want the shortcut to do carriage return with the "ssh foo". If its just "ssh foo", then I can write an alias in .bashrc. My goal is to minimize the number of keystrokes I've to do at the end of the day.

  Read the article

• Volume key occassionally changes relative volume in mixer

  - by bobobobo

  I find this a bit of a nuisance but I usually use the "volume up/down" key on my Microsoft ergo 4000 to change the volume of my system. The problem I'm experiencing is every so often, the volume of Winamp goes way down relative to the other apps in the mixer: So I don't always notice this right away, suddenly I can't hear Brandy warbling. And that makes me sad. Or mad. Or both. But it's a nuisance - is there a special key combination I need to avoid pressing to stop the mixer from imbalancing? Is there a way to disable this "app specific" mixer, because it is completely useless to me.

  Read the article

• windows cant "see" camera

  - by user330401

  So I bought a lil emerson camera and I am trying to get it to read the thing on windows 7. The instructions for the camer say when you first hook it up via usb AUTOPLAY will come up and your good to go. Well that worked for me the first time I hooked it up. However the 2nd time, it started trying to install drivers. Since then I can't get it to show up in windows explorer. I have tried disabling and uninstalling everything and trying to start from scratch but its useless, I'm stuck with having to pull the sd card everytime. I really dont like doing this as its a cheap camera, so if I can fix the communication between the devices via usb I would be really happy. As of right now the device installation shows a checked USB COMPOSITE DEVICE and 3 X'd GENERIC IMAGE DEVIC. Can someone please help me get this sorted. PS there are no drivers for this camera, not in the packaging, not available from emerson, and to be honest it shouldn't need any. The only function the camera has when hooked up via USB is charging and access to the DCIM. The charging still works, but the drive just won't load. Any suggestions?

  Read the article

• How to skip pushing the default gateway via DHCP in OpenWRT?

  - by francadaval

  I have a router with OpenWRT that I want to resolve IP addressing with DHCP without setting a default gateway. I have added a DHCP-Option parameter with value 3,0.0.0.0 that is supposed to set the default gateway by DHCP. Instead, the router IP is defined as default gateway for DHCP connections. How can I set a null default gateway (0.0.0.0) for connections configuration by DHCP? As said in a comment: I want this router to service a VirtualBox network that doesn't set a default gateway via DHCP.

  Read the article

< Previous Page | 588 589 590 591 592 593 594 595 596 597 598 599  | Next Page >