Search Results

Search found 16472 results on 659 pages for 'computer scientist'.

Page 594/659 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• Combine multiple network interfaces to connect to a dedicated server

  - by Dženis Macanovic

  this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

  Read the article

• Linux can dual display but windows can't?

  - by Mr_CryptoPrime

  I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

  Read the article

• Install Windows 8 on SSD and Program & Users on HDD

  - by Foe

  I have been dealing with a few problems while installing Windows 8 on my computer. On my old configuration, I had Windows 7 installed on my 60Go SSD, and my programs and user data on my 1To HDD, thanks to relative links. Yet, while installing Windows 8 on my SSD, he made a small partition on my HDD "System related". Plus, I'm afraid using only links is a bit cheap, and I saw lots of people messing with their registry when trying to put user data on another drive. I read a lot about optimizing Windows 8 for SSD, putting Users on another drive, and very similar situation that didn't quite correspond to what I was trying to achieve. Here's what I tried : http://www.eightforums.com/tutorials/4275-user-profiles-relocate-another-partition-disk.html Booting on Audit mode and using an XML to relocate Users didn't work as the specified version in the file is a test one, and I don't what to enter if I'm using the last release. Booting with the install DVD in repair mode to do a copy of the User and create a relative link, resulting in an error on the logon screen while entering my password saying that "The profile can't be load" (average translation of my error from french to english) Do anyone know how to do a clean separated install of Windows 8, with OS on a drive, and the other data on a second one ? Thanks.

  Read the article

• VirtualBox bridged network not working as expected

  - by iby chenko

  I am having hard time getting Bridged network to work with VirtualBox. Idea is to have host as well as one or more guests on same LAN. Using NAT (default) I do get access to internet and any node on the LAN when working from one of the VM guests. However, no LAN node including host can access (or ping) guest in VM. I need to be able to use any guest as if it was a physical computer on the network (need to be accessed by any machine on LAN). According to my understanding of the VirtualBox documentation, this should be Bridged mode. I think I set it correctly, well, actually there is not much to it: 1. select Bridged mode in VM network setup 2. select physical NIC of the host to connect bridge to 3. start VM When I do this, each VM does get new IP address that corresponds to LAN settings : 192.168.1.100 192.168.1.102 192.168.1.103 etc. where host is 192.168.1.80 / 255.255.255.0 (IP addresses above 100 are served by DHCP server). This seem to be correct based on what I know about ethernet. From VM I can ping other nodes like 192.168.1.50 etc. and I still get ethernet access. So far so good... But I STILL cannot ping any of the other VMs (running ones of course). I cannot ping them from other VMs, from host or from other nodes on the LAN. Aside from fact that IP addresses handed to guests are now local, this still acts same as NAT. What is going on? What am I missing? Regards, I

  Read the article

• Setup Apache with IPv6

  - by mrz

  I have two virtual machine on my computer. I have Apache installed on one of them (would be referred to as "server" after this), and I have set the Apache to listen to an IPv6. And when I enter the IPv6 into web browser on the "server" I see my index.html file. so far so good ... I want to be able to open a web browser on the other virtual machine("client") and see the index.html. But, when I try entering the IPv6 of the "server" in a web browser on the "client" I get an Unable to establish a connection to the server error. I can ping6 "client" from "server" and vice verse. There is only one thing to mention. ifconfig of the "server" shows 3 different IPv6 which two of them are scoped Global and there is one Link scope IPv6. On the "client" there is only one Link scope IPv6 though. I only can ping the Link IPv6s. Pinging other IPv6s would result connect:Network is unreachable. And if I set Apache to listen to Link IPv6, The rcapache2 start will fail the job. Any thoughts on what I am probably missing/doing wrong?

  Read the article

• newbie: Allow domain users to change power-savings settings

  - by user65007

  I've just recently installed SMS 2011 on a server and added several computers to it's domain. Now I've noticed that I cannot change power settings (even when logged in as user who is in Domain Administrator role, let's call it Admin for future reference). After some googling I ended up adding Admin to the local administrators group using Group Policy Management Editor (as I have no experience in server administration I'm not sure I did it right: I went to Policy Management, selected Forest: xxxxx - Domains - xxxxx - Group Policy Objects - Windows SBS Client - Windows 7 and Windows Vista Policy - go to Settings tab on the right and right-click on anything and select Edit to go to Group Policy Mangement Editor - User Configuration - Preferences - Control Panel Settings - Local Users and Groups - right-click on it and select New - Local Group, then set Action to "Update", Group Name to "Administrators (built-in)", and added Admin to Members). After that I was able to change the power-savings settings on client computers(when logged in as Admin). Now the question: what should I do to allow any domain user to change this settings? Notice, I do not want to force some predefined power plan to all computers, I want to set it up so that any domain user on any client computer would be able to select a different power plan and to make any adjustments to the selected one. Thank you for any suggestions, just keep in mind that I'm newbie (but not completely dumb), so please answer accordingly :)

  Read the article

• Run as another user, but also as administrator

  - by Tewr

  I am trying to debug a virtual machine (VM) running on a remote computer from my workstation (A). Both VM and A are running Windows 7 Enterprise. Apparently, I need to start the Remote Debugger Service (RDS) on VM as an administrator. Apparently, I also need to run RDS as the user Tewr logged in on A (domain: DOM). VM runs the services i need to debug, as well as the remote desktop interface with an account VMUSER in a domain called VMDOMAIN. I manage to start RDS as administrator, but then the RDS process is owned by VMUSER and that's not good enough. I also manage to run RDS as DOM\Tewr, but then not as an administrator. I have Added DOM\Tewr as an administrator on VM, but thats not good enough becuase the process is still not run as administrator. How can I run the RDS process as DOM\Tewr and "As Administrator", while logged on in windows as VMDOMAIN\VM? (note: I have tried creating an account with the same credentials / password as VMUSER, as hinted in the ms article above, but with no luck...)

  Read the article

• rsync via cron. How do I enable logging?

  - by tetranz

  Hi all I'm backing up a remote server to another computer using rsync. In cron.daily I have a file with this: rsync -avz -e ssh [email protected]:/ /mybackup/ It uses a public / private key pair to login. This seems to work well most of the time however, I've (foolishly) only ever really checked it by looking at the dates on some important files (MySQL dumps) that I know change every day. Obviously, an error could occur after that file. Sometimes it fails. When I run it manually, something like "client reset" sometimes happens. What is the best way to log it so that I can check with certainty if it completed or not? The cron log doesn't indicate any errors. I haven't tried it but the rsync man page on the oldish version of CentOS on the backup machine doesn't show the --log-file option. I guess I could redirect stdout with but I don't really want to know about every file. I just want to know if it all worked or not.. Thanks

  Read the article

• Am I safe on Windows if I continue like this?

  - by max

  Of all the available tons of anti-malware software for Windows all over the internet, I've never used any paid solution(I am a student, I have no money). Since the last 10 years, my computers running Windows have never been hacked/compromised or infected so badly that I had to reformat them(of course I did reformat them for other reasons). The only program I have for security is Avast Home Edition, which is free, installed on my computers. It has never caused any problems; always detected malware, updated automatically, has an option to sandbox programs and everything else I need. Even if I got infected, I just did a boot-time scan with it, downloaded and ran Malwarebytes, scanned Autoruns logs, checked running processes with Process Explorer and did some other things and made sure I cleaned my computer. I am quite experienced and I've always taken basic precautions like not clicking suspicious executables, not going to sites which are suspicious according to WOT, and all that blah. But recently I've been doing more and more online transactions and since its 2012 now, I'm doubtful whether I need more security or not. Have I been just lucky, or do my computing habits obviate the need to use any more(or paid) security software?

  Read the article

• Remote Desktop connection to vista vs. xp

  - by CMP

  I am trying to log into my work computer remotely. I am using Windows 7 on my laptop. I have created a vpn connection to the network, and I am doing a remote desktop connection directly to the ip of my box (192.168.xxx.yyy). If I do a remote connection to a different box, running xp, it goes into remote desktop mode immediately and I see the windows login dialog as I am used to seeing. If I try remoting to my box, which is running vista, I do not see the remote desktop mode, but an additional dialog on my local machine asking for my credentials. It defaults in my local username. It allows me to log in as a different user, but the domain it has is still my local domain, not my work domain, so none of my usernames or passwords work. There doesn't appear to be a way to change the domain. Trying to hit several more boxes, it appears to act differently on xp and vista target machines. I feel like this must be a configuration issue, but I am not sure what the problem is. Any idea on how I can connect?

  Read the article

• Winodws server 2003 Setup

  - by Barracksbuilder

  I work at a university maintaining the computer science department server. I am looking for a more economical way to stream line the set up of student accounts. CS students are granted a Username and password an IIS virtual directory, FTP virtual directory, and a mysql database. Server is running windows server 2003R2 (Possibly migrating to 2008R2) The server is running a domain though no students physically log a terminal into it (No computers are part of my domain.) Creating the account is a manual process. I did right a PHP script to query the Universities AD and copy the information and write it to my AD. I then have to create basically the users home directory. I tried having AD do it but since the user never physically logs in it never creates the directory. Permissions on this folder are set to User - full, Instructors (group) - full, Users (group) - read, IUSER - read. Inside of the users folder their is a "Private" folder with permissions User - full, instructors (group) - full. Next step is IIS I create a virtual directory in the default web site pointed to the users home directory so they have a website. Same goes for FTP virtual directory in the default ftp configuration to allow the users to upload files to their website. Mysql I have to create a user and password then create a mysql scheme (database) full access for the user and full access to the instructors account to be able to access the students database. All of this is done manually and takes me a week to do. The closest description is maybe a shared hosting environment. Is there a better way to do this? Scripting wise, or better structure setup?

  Read the article

• Windows 7 permissions and Samba domain

  - by Nimzo

  I'm the main desktop support in an office of mixed MacOS and WinXp machines, about 60. I'm new to Windows 7. Currently our XP users are admins on their own machines, and my boss is wanting us to get away from that now that we're going to Windows 7 (64bit). My boss is largely absent from my day-to-day work, so I'm here looking for help =) I have numerous unattended .cmd scripts that we run from a server share, unattended software installs. Some run at login, some have to be run manually. With the NetworkAdmin account logged on to the computer, I am able to run the .cmd files and install stuff just fine. With my test account logged on (Power User), I cannot run the .cmd file - I get an Access Denied. When I change my test account to an Admin on the machine, I still get access denied. However, the test account can simply double-click the .exe and install the software just fine, as admin. Power User can't install anything. How do I fix it so that any power user or admin on the machine can run anything as long as it's on our shared software drive?

  Read the article

• Printer spools but doesn't print

  - by DKNUCKLES

  I am having a bizarre issue with an end user who is unable to print to a USB attached printer. The environment is as Windows 7 machine with a Canon Pixma iP90 printer. The driver is installed (and has been re-installed several times), but whenever a print job is sent the printer spools but no printing ever occurs. The following is some relevant information I can confirm that the printer is spooling as the spool folder fills up, and the job "releases" and the spool folder empties I have turned off print spooling with no luck None of the features from the Canon utilities (ie Turn Printer Off) features work Computer recognizes the printer as being installed. When the cable is unplugged the printer icon grey's out in Devices and Printers Printer and cable are confirmed working as they work with other PC's in the office I have deleted the USB Root Hub devices and rebooted the machine with no luck No error messages are displayed or logged in the event viewer. The Canon diagnostics utility doesn't detect any problem and states the printer is functioning properly Printer is not shared User is able to print to other shared printers in the office Any help with this issue would be greatly appreciated.

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• SSD won't boot anymore

  - by LordrAider

  Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

  Read the article

• Our clients site is redirecting to a pill scammy site [closed]

  - by Alex Demchak

  Possible Duplicate: My server's been hacked EMERGENCY We've usually host our clients site, but we aren't hosting this one. The website itself (weddle-funeral.com) works just fine. if you load google and search for weddle funeral stayton oregon - and click that link, the site links to a scammy pill site. I went through the site and there were some php files in the wordpress plugins that got quarantined by my antivirus. I removed ALL non essential files, and uploaded fresh versions of all the plugins, but it's STILL redirecting from google. I tried logging in to the cpanel (on a virtual private server), and the cpanel flashed a red warning screen The site's security certificate is not trusted! You attempted to reach XXXXX.com, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site. (Keep in mind, that's for the HOSTING accounts CPanel) Is there something in the SERVER probably that's causing the redirect? EDIT: .htaccess file contents # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress

  Read the article

• Troubleshooting DTCPing Errors

  - by JimmyP

  So I am running DTC ping between 2 machines on our network and am getting the following error ++++++++++++++++++++++++++++++++++++++++++++++ DTCping 1.9 Report for WEB2 ++++++++++++++++++++++++++++++++++++++++++++++ RPC server is ready ++++++++++++Validating Remote Computer Name++++++++++++ 03-03, 13:39:45.099-->Start DTC connection test Name Resolution: internal-->10.20.3.236-->internal.something 03-03, 13:39:45.114-->Start RPC test (WEB2-->internal) Problem:fail to invoke remote RPC method Error(0x6BA) at dtcping.cpp @303 -->RPC pinging exception -->1722(The RPC server is unavailable.) RPC test failed I have also run RPC ping where I get what I beleive is the same error: C:\Program Files\Windows Resource Kits\Tools>rpcping -s internal Exception 1722 (0x000006BA) Number of records is: 4 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1722 Detection location is 323 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1237 Detection location is 313 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 311 Flags is 0 NumberOfParameters is 3 Long val: 135 Pointer val: 0 Pointer val: 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 318 Flags is 0 NumberOfParameters is 0 I'm pretty sure that the exception number 1722 is the key but I can't find any info about it. There may be a firewall with ports that need opening between the machines which I am checking with our sys admins now. But I can do a regular ping between the machines. Other than that I am reading a lot of articles talking about OS services and components I know nothing about and am having trouble finding any info on. Can anyone shed any light on this? FYI the machine is running Windows Server 2003 RS SP2.

  Read the article

• Big and reaaaally strange problem with a web server (host InMotion Hosting)

  - by altar

  Hi. I have a terrible problem that I have tried to solve since three days ago: I browse my own web site and after a while I cannot access the web site. AT ALL! I can only see a 501 error message: "Method Not Implemented. GET to / not supported. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request." Once I get that error the site is totally and permanently inaccessible in that browser!! Reboot, browser restarts, clear cache, clear all history and cookies, etc., are not working. I have reproduced it in 4 different computers. Three computers are in one city, the 4th is in another city. Two different ISP's also. One computer is Linux, the others are on Windows (XP and 2000). Browsers are FF 3 to FF3.5 and IE 8. The error is ALMOST reproducible on demand (for me at least). It appears when I browse the forum under certain circumstances. I don't know which are these circumstances, but if I browse it long enough (10 sec to 5 minutes) it eventually appears. Just to make it clear, once the error appears (while browsing the forum) then the whole web site become inaccessible, not only the forum! My host is not willing to help because they say they cannot reproduce the error. I sent screenoshots but they don't care. NEWS Reseting browser's settings from the 'Tools-Clear private data' din't worked. However! When I have cleared the same settings (more exaclty) cookies from the special menu that appears when you right click website's icon, it worked. So it was something related to a cookie BUT it manifests in all browsers (FF, IE, Opera). So it cannot be a browser related problem.

  Read the article

• different user group can not upload file in the server

  - by Dallal

  I have a CentOS server running in Thailand, and I'm in Canada. The guy at the computer center who set up the server for me doesn't really understand much about linux and left me off an issue to solve myself. I just moved from Mac Server to Linux server, and the first thing I'm facing a problem now is `file name` has failed to upload due to an error The uploaded file could not be moved to `location name` So what happen is that I knew from my experiences of these problem is all about permissions. So I go ahead and checked on my whole folder and found that everything in the folder permission is like myusername mygroupname then I checked the httpd file in the server and it is default to apache apache. My question is that how can I make my user to be in the same group with apache group so that I don't have to have any problem about uploading, changing data in my file....? But without having to affect other user in the same server. I'm holding Administrator account, but not root account, but I can change stuff on the server root no problem. When I was with godaddy.com there never been any problem about the permission and I wish I know how they configure that :(

  Read the article

• Exchange 2013 really slow outside of localhost

  - by ItsJustJP

  We've got a 12 core xeon, 24GB of ram 2012 server. We've recently migrated from exchange 2010 (which was on another server) to exchange 2013 which resides on our new 12 core server. Accessing the OWA on the exchange server is fine; it's very quick and responsive however accessing it via any other computer connect to the domain via a 1 gpbs connection and it'll take 10-15 seconds to load. Also running slow is public calenders that people in my place need to access, again taking 10-15 seconds to access and can sometimes cause outlook to not respond. Further to that we have phones that connect via the internet (of course) to the exchange so people can get work emails when they are out of the office. Guess what, this is also running slow. I've have search for many solutions and have tried changing outlook authentication methods but there is no change in speed. The old exchange 2010 server no longer exists but there was no problem before the migration. Has anyone got any suggestions? Thanks :) Must also mention that server 2012 that exchange 2013 is installed on is also the DC. Update: It would appear that any connection via https is slow. It took more than 15 mins for an outlook client to download 50MB of emails (outlook anywhere).

  Read the article

• Why would my network slow down?

  - by monkthemighty

  The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

  Read the article

• Multiboot USB (OSX only): How to customize partition name?

  - by wrk2bike

  Trying to deal with all the Mac OSX recovery disks I've got by moving them to bootable USB images. I've got a big USB drive with multiple partitions for each recovery disk, and it's easy to use Disk Utility to "restore" the recovery DVD to a partition. When I boot my target Mac while holding down the Alt key, I can see all my bootable images and they work great. Problem is, they've all got the same name: "Mac OS X Install DVD." I manage Macs of various vintages. If my target Mac needs 10.6.3 for example, my only option seems to be to try each one until I get past the "Mac OSX can't be installed on this computer" message. I originally named my partitions with the OSX revision number, but that name is replaced by the disk image name during Disk Utility restore. Is there any way to customize the name during or after Disk Utility restore? I tried making a new DVD image on disk first and renaming it, but when I restore it to my recovery partition it has the original name. EDIT: After booting to the wrong partition, and getting the "..can't be installed" message, I can open the Startup Disk menu and see the other partitions - and as I select each one, the info at the bottom indicates which OS revision is on that partition. So I know the info is in there! Just want it at the boot screen if possible.

  Read the article

• Script apparently changing file permissions on Mac OS to 000

  - by half_bit

  I wrote a little shellscript that helps installing a web application. The script itself just downloads a zip archive, extracts it and changes the permissions of the extracted files to the one needed to run the webapp. The problem now is that some users reported that after running my script, all the permissions of every file in their home directory or even on their whole computer changed to 000 (except the actual unzipped files which do have the correct permissions). The only lines in my script actually doing IO are these: URL="http://foo.com/" FILENAME="some.zip" curl --silent "$URL$FILENAME" -o $FILENAME > /dev/null echo "Unzipping...\c" if unzip -oqq $FILENAME > /dev/null then chmod -R 777 app/tmp app/webroot app/Config/database* app/configuration* chown -R www:www * rm $FILENAME echo "\t\t\tOK" exit 0 else echo "\t\t\tERROR" exit 1 fi I seriously can't explain this to myself. How can this even be possible? It is entirely possible that the users accidentally ran the script in their home directory, but that still wouldn't explain why the permissions where set to 000, not www/777.

  Read the article

• netbook screen stays black

  - by sam113101

  I have an acer aspire one netbook. The screen is black but the computer turns on (LED's are on, fan is spinning, etc.) By black I mean absolutely no backlight. I tried to remove the battery and power it on to "discharge" it (I read that on the Internet, not sure if that ever fixes anything), but no luck. I also tried to replace the RAM stick with another one (which I know for sure is working properly), still no luck. I tried to connect an external monitor and switch to it (fn + f5 on this particular model), still no luck, nothing on the external monitor. I read that flashing the BIOS could fix it (http://community.spiceworks.com/how_to/show/22042-acer-aspire-one-black-screen-of-death), I tried to flash it but basically it doesn't do anything when I power it on with the usb thumb drive. No blinking power button. To me it sounds like it might be a dead motherboard, a dead RAM slot (there's only one), or the BIOS thing. I would like to rule out the BIOS possibility, but I need help. The reason I ruled out the dead screen possibility is that it did not switch to the external display when I pressed fn + f5, am I wrong by assuming so? Thank you for your help.

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >