Search Results

Search found 23555 results on 943 pages for 'command timeout'.

Page 595/943 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

  • How can I make check_nrpe wait for my remote script to finish executing?

    - by Rauffle
    I have a python script that's being used as a plugin for NRPE. This script checks to see if a process if running on a virtual machine by doing an SSH one-liner with a "ps ax | grep process" attached. When executing the script manually, it works as expected and returns a single line of output for NRPE as well as a status based on whether or not the process is running. When I attempt to run the command setup to execute this script (from my Nagios server), I instantly get the output "NRPE: Unable to read output", however when I run the script manually it takes about a second before it returns output. Other commands run just fine, so it would seem like NRPE needs to wait a second or two for output rather than instantly failing, but I've been unable to find any way of accomplishing this; any tips? Thanks PS: The virtual machines are not accessible from anywhere other than the host machine, hence the need for the nrpe plugin to ssh from the host into the VM to check the process.

    Read the article

  • Error on `gksu nautilus` because Nautilus cannot create folder "/root/.config/nautilus"

    - by luciehn
    I have a problem executing nautilus in root mode on a fresh installation. I just installed Ubuntu 12.04, and the first thing I did after first boot was run the command gksudo nautilus, I've got this error message: Nautilus could not create the required folder "/root/.config/nautilus". Before running Nautilus, please create the following folder, or set permissions such that Nautilus can create it. I am triple booting Windows 7, Fedora 17 and Ubuntu 12.04. My partition configuration is this: sda1 --> (ntfs) Windows 7 boot partition sda2 --> (ntfs) Windows 7 sda3 --> (ext4) Fedora 17 /boot partition sda4 --> Extended partition sda5 --> LVM Fedora 17, with 3 partitions inside (/, /home and swap) sda6 --> (ext4) Ubuntu 12.04 /boot partition sda7 --> (ext4) Ubuntu 12.04 swap partition sda8 --> (ext4) Ubuntu 12.04 / partition sda9 --> (ext4) Ubuntu 12.04 /home partition The MBR is using Windows, so is this one which is controlling the machine boot menu. Looks like Nautilus does not have permission to write in /root/.config, but it should right? I prefer asking before doing nothing wrong. Any ideas?

    Read the article

  • How to abort robocopy on first error

    - by Yurik
    When using robocopy windows utility, what flags do I set so that robocopy aborts on the very first error it sees, similar to xcopy /dry command? I need to mirror two dirs, and on occasion some files would be locked. I do not want robocopy to continue trying to copy files, or override the files that are not locked - rather the very first error should stop the whole copy process. UPDATE: I already have the /R set to 0 - unfortunately that it only applies to a single file, NOT to the whole copying process. Hence, the first file is ignored (instead of stopping the copying), but subsequent files are copied.

    Read the article

  • MySQL equivalent to .pgpass, or automatic authentication in a cron job for mySQL

    - by Ibrahim
    I'm writing a bash script to back up my databases. Most are postgresql, and in postgres there's a way to avoid having to authenticate by creating a ~/.pgpass file which contains the postgres password. I put this in root's home directory and made it chmod 0600, so that root could dump the postgres databases without having to authenticate. Now I want to do something similar for mysql, although I only have one mysql database. How can I do this? I don't want to specify the password on the command line for mysqldump because this is part of a script that might be somewhat visible to other users. Is there a better way (i.e. built in to mysql) to do this than make a file that only root can read and then read that to get the mysql password, and then use that in the bash script as a variable?

    Read the article

  • MySQL equivalent to .pgpass, or automatic authentication in a cron job for mySQL

    - by Ibrahim
    I'm writing a bash script to back up my databases. Most are postgresql, and in postgres there's a way to avoid having to authenticate by creating a ~/.pgpass file which contains the postgres password. I put this in root's home directory and made it chmod 0600, so that root could dump the postgres databases without having to authenticate. Now I want to do something similar for mysql, although I only have one mysql database. How can I do this? I don't want to specify the password on the command line for mysqldump because this is part of a script that might be somewhat visible to other users. Is there a better way (i.e. built in to mysql) to do this than make a file that only root can read and then read that to get the mysql password, and then use that in the bash script as a variable?

    Read the article

  • Java Spotlight Episode 113: John Ceccarelli on Netbeans @JCeccarelli1

    - by Roger Brinkley
    Interview with John Ceccarelli on Netbeans. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News JCP Star Spec Leads 2012 Nominations open now until 31 December Java EE 7 Survey Results JavaFX for Tablets Survey JavaFX Scene Builder - Developer Preview Release Oracle JDK 7u10 released with new security features jtreg update, December 2012 Food For Tests: 7u12 Build b05, 8 b68 Preview Builds + Builds with Lambda & Type Annotation Support Developer Preview of Java SE 8 (with JavaFX) for ARM Project Nashorn: The Vote Is In Events Dec 20, 9:30am JCP Spec Lead Call December on Developing a TCK Jan 15-16, JCP EC Face to Face Meeting, West Coast USA Jan 14-17, IOUG, Redwood Shores Jan 29-31, Distributech,  San Diego Feb 2-3 FOSDEM, Brussels Feb 4-6 Jfokus, Sweden Feature Interview John Jullion-Ceccarelli is the head of engineering for the NetBeans open source project and for the VisualVM Java profiler. John started with Sun Microsystems in 2001 as a technical writer and has since held a variety of positions including technical publications manager, engineering manager, and NetBeans IDE 6.9 Release Boss. He recently relocated to the San Francisco Bay Area after 13 years living in Prague, the Czech Republic. What’s Cool Glassfish is 3 years old Arduino/Raspberry-Pi/JavaFX mash-up by Jose Pereda Early Access of Drombler FX for building modular JavaFX applications with OSGi and Maven Eclipse Modeling Framework Support coming for e(fx)clipse 8003562: Provide a command-line tool to find static dependencies Duke’s Choice Awards Winners LAD - includes JCP EC Member TOTVS London Java Community and SouJava jointly win JCP member of the year

    Read the article

  • Announcing the latest update to Oracle VM Server for x86 2.2 Release

    - by Honglin Su
    More and more customers have discovered that Oracle delivers more value with Oracle VM compared with other server virtualization solutions, and we've seen the momentum that customers succeed with Oracle VM and leading partners support Oracle VM. Recently, Oracle VM server for x86 with Windows PV Drivers passed Microsoft SVVP requirements for Windows servers, which provides customers more confidence to deploy Microsoft Windows guest OS onto Oracle VM server for x86. Today I'm pleased to announce the Oracle VM server for x86 2.2.2 release. See the new features introduced in the 2.2.2 release. Expand the guest OS support to include Oracle Linux 6.x and Oracle Solaris 11 Express OS. For a complete list of guest OS support, please refer to the Oracle VM server x86 release note. The VMPInfo system information and cluster troubleshooting utility is provided with this release. Additional information on VMPInfo is also available in the following My Oracle Support Notes: 1263293.1 Post-installation check list for new Oracle VM Server 1290587.1 Performing Site Reviews and Cluster Troubleshooting with VMPInfo A new storage repository option to provide NFS mount options when creating a storage repository. For more information on this new parameter, see Oracle VM Server User Guide "Adding a Storage Repository". Updated OCFS2 cluster file system, libdhcp, device drivers. See details and additional enhancements at Oracle VM Server User Guide: New Features in Release 2.2.2. The Oracle VM Server for x86 ISO image is available for download at Oracle's E-Delivery site. If you've subscribed to Oracle's Unbreakable Linux Network (ULN), you can simply run up2date command to update the server. Please refer to Oracle VM Upgrade Guide: Upgrading Oracle VM Server. There's no change to Oracle VM Manager, which remains at 2.2.0 with the patch 2.2-16. If you have any questions about Oracle VM Serer for x86, you may post your questions at OTN discussion forum; or purchase support for Oracle Unbreakable Linux and Oracle VM. For Oracle's x86 systems, Oracle VM support as well Oracle Linux and Oracle Solaris support are included in the Oracle Premier Support for Systems. For more information about Oracle's virtualization, visit oracle.com/virtualization.

    Read the article

  • Asus Sonic Master on Asus N53SV

    - by David Winchester
    I have read that there's a problem to get the subwoofer working in these laptops. I tried this solution No sound from external subwoofer but I don't how to prove that the subwoofer is properly functioning. I use Pulseaudio equalizer and the bass sound seems to work fine, but when I go to the Sound Settings, I can't move the bar where it says 'Subwoofer' in my sound card option, so I don't know if everything is alright. If someone has a solution I would like to know, because there isn't much information regarding this. By the way, I'm using Ubuntu 12.04 64 bits. Thanks beforehand, Dave EDIT ----------- Possible Solution Well, I will post a solution that worked for me and I think it will help a lot of users. I finally got the subwoofer working. Besides adding in /etc/modprobe.d/alsa-base.conf the line options snd-hda-intel model=asus-mode4 I deleted the lines with load-module module-combine and module-combine-sink in /etc/pulse/default.pa (in the home folder there's also a ~/.pulse/default.pa file, I don't know if it has the lines too) To assure all the channels are working, I think this command tells me that speaker-test -c6 -l1 -twav I use pulseaudio-equalizer and the bass sounds very well when properly adjusted. Also, all the channels seems to work fine and the sound is even better than in Windows (where I don't have an equalizer). I pointed out before a module-combine and module-combine-sink problem, because one day I turned on my laptop and pulseaudio didn't work. So I deleted the lines with that names (don't know if they came by default, maybe I added them sometime when I was trying to fix my speakers). After all this, I can now move the Subwoofer bar in the Sound configuration. Anyways, the Equalizer does a great job and it improves the sound a lot.

    Read the article

  • Sendmail background process sometimes processes queue, but sendmail -q always works

    - by markmcb
    I'm using sendmail version 8.14.4 on Fedora 15 to send email. My Rails app uses delayed_job to queue up emails. Messages will queue up in /var/spool/mqueue as expected, but don't always get processed. I can see the messages and sendmail is definitely running in the background. Restarting the process does nothing. However, when I issue the sendmail -q command, sendmail gets to work and starts sending. The really odd thing is that this behavior only occurs sometimes. Other times message queue up and are delivered as expected. I've tried tweaking various sendmail configs to reduce the time between queue processing (for example, adding define('confMIN_QUEUE_AGE', '0')dnl to /etc/mail/sendmail.mc), but nothing seems to do the trick. Any ideas what might be the root cause?

    Read the article

  • Can't create VM with virt-install on Debian wheezy

    - by chrismacp
    Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

    Read the article

  • Sendmail not working from local PHP when headers not specified

    - by Dan
    Hi. I'm having trouble getting my local XAMPP server to send emails via my remote SMTP server. In PHP, if I put: $headers = "From: [email protected]\r\n"; mail('[email protected]', 'test', '', $headers); Then this works. However, if I don't specify the header, ie.: mail('[email protected]', 'test', ''); Then this fails. The sendmail.log file says: smtpstatus=554 smtpmsg='554 Message refused.' errormsg='the server did not accept the mail' exitcode=EX_UNAVAILABLE I've tried changing my sendmail command in my php.ini to: sendmail_path = "C:/xampp/sendmail/sendmail.exe -t -f [email protected]" but this doesn't work either. Thanks for any help with this, Dan. ps. this is on windows.

    Read the article

  • Winbind group lookup painfully slow

    - by Marty
    I am running winbind on an RHEL 6 system. Everything works fine except group lookups, so many commands (including sudo) are painfully slow. I did an strace which shows that winbind looks up every group and every user within each group for the current user. Some of these groups have 20000+ users so a simple sudo can take 60 seconds to complete. I really only care about speeding up the sudo command. Ideal solutions would make it so either: groups with more than X number of users will not be looked up, or sudo bypasses group lookups altogether. Here is my current "smb.conf" for winbind: workgroup = EXAMPLE password server = AD1.EXAMPLE.ORG realm = EXAMPLE.ORG security = ads idmap uid = 10000-19999 idmap gid = 10000-19999 idmap config EXAMPLE:backend = rid idmap config EXAMPLE:range = 10000000-19999999 winbind enum users = no winbind enum groups = no winbind separator = + template homedir = /home/%U template shell = /bin/bash winbind use default domain = yes winbind offline logon = false

    Read the article

  • Why does Ubuntu's Nautilus display a folder called "Examples" while the console displays "examples.desktop"

    - by broiyan
    These folders occur at /home/username. How does this name discrepancy arise? (Uppercase E versus lowercase e.) It seems to be a shortcut to /usr/share/example-content. How can I delete /usr/share/example-content/Ubuntu_Free_Culture_Showcase without using the command line? One possible answer is to make a privileged Nautilus using something like these SUSE instructions (link below). Unfortunately "gnomesu nautilus" gives me a "gnomesu: no such file" message and "sudo nautilus" does not do anything when added to the properties of the Launcher. Update: "sudo nautilus" from the console let's me delete but there is a mess of error messages. http://forums.opensuse.org/english/get-technical-help-here/how-faq-forums/unreviewed-how-faq/426153-how-nautilus-super-user-mode-gnome.html

    Read the article

  • What does "error reading login count from pmvarrun" mean?

    - by n3rd
    I have the above mentioned error in my /var/log/auth.log file and just try to figure out if this is a harmelss statement. As far as I understand does pmvarrun tells the system how many active session (e.g. logins) a user has on the system. Full output of auth.log Jan 24 17:44:42 P835 lightdm: pam_unix(lightdm:session): session opened for user lightdm by (uid=0) Jan 24 17:44:42 P835 lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 Jan 24 17:44:49 P835 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "user" Jan 24 17:44:51 P835 dbus[1289]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=104 pid=1882 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1561 comm="/usr/sbin/console-kit-daemon --no-daemon ") Jan 24 17:45:04 P835 lightdm: pam_unix(lightdm:session): session closed for user lightdm Jan 24 17:45:04 P835 lightdm: pam_mount(pam_mount.c:691): received order to close things Jan 24 17:45:04 P835 lightdm: pam_mount(pam_mount.c:693): No volumes to umount Jan 24 17:45:04 P835 lightdm: command: 'pmvarrun' '-u' 'user' '-o' '-1' Jan 24 17:45:04 P835 lightdm: pam_mount(misc.c:38): set_myuid<pre>: (ruid/rgid=0/0, e=0/0) Jan 24 17:45:04 P835 lightdm: pam_mount(misc.c:38): set_myuid<post>: (ruid/rgid=0/0, e=0/0) Jan 24 17:45:04 P835 lightdm: pam_mount(pam_mount.c:438): error reading login count from pmvarrun Jan 24 17:45:04 P835 lightdm: pam_mount(pam_mount.c:728): pam_mount execution complete Jan 24 17:45:08 P835 lightdm: pam_unix(lightdm:session): session opened for user user by (uid=0) Jan 24 17:45:08 P835 lightdm: pam_ck_connector(lightdm:session): nox11 mode, ignoring PAM_TTY :0 Jan 24 17:45:25 P835 polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.54 [/usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1], object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) Jan 24 17:45:47 P835 dbus[1289]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.59" (uid=1000 pid=4748 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.17" (uid=0 pid=1561 comm="/usr/sbin/console-kit-daemon --no-daemon ") Thanks for any help

    Read the article

  • Finding the problem on a partially succeeded build

    - by Martin Hinshelwood
    Now that I have the Build failing because of a genuine bug and not just because of a test framework failure, lets see if we can trace through to finding why the first test in our new application failed. Lets look at the build and see if we can see why there is a red cross on it. First, lets open that build list. On Team Explorer Expand your Team Project Collection | Team Project and then Builds. Double click the offending build. Figure: Opening the Build list is a key way to see what the current state of your software is.   Figure: A test is failing, but we can now view the Test Results to find the problem      Figure: You can quite clearly see that the test has failed with “The device is not ready”. To me the “The Device is not ready” smacks of a System.IO exception, but it passed on my local computer, so why not on the build server? Its a FaultException so it is most likely coming from the Service and not the client, so lets take a look at the client method that the test is calling: bool IProfileService.SaveDefaultProjectFile(string strComputerName) { ProjectFile file = new ProjectFile() { ProjectFileName = strComputerName + "_" + System.DateTime.Now.ToString("yyyyMMddhhmmsss") + ".xml", ConnectionString = "persist security info=False; pooling=False; data source=(local); application name=SSW.SQLDeploy.vshost.exe; integrated security=SSPI; initial catalog=SSWSQLDeployNorthwindSample", DateCreated = System.DateTime.Now, DateUpdated = System.DateTime.Now, FolderPath = @"C:\Program Files\SSW SQL Deploy\SampleData\", IsComplete=false, Version = "1.3", NewDatabase = true, TimeOut = 5, TurnOnMSDE = false, Mode="AutomaticMode" }; string strFolderPath = "D:\\"; //LocalSettings.ProjectFileBasePath; string strFileName = strFolderPath + file.ProjectFileName; try { using (FileStream fs = new FileStream(strFileName, FileMode.Create)) { DataContractSerializer serializer = new DataContractSerializer(typeof(ProjectFile)); using (XmlDictionaryWriter writer = XmlDictionaryWriter.CreateTextWriter(fs)) { serializer.WriteObject(writer, file); } } } catch (Exception ex) { //TODO: Log the exception throw ex; return false; } return true; } Figure: You can see on lines 9 and 18 that there are calls being made to specific folders and disks. What is wrong with this code? What assumptions mistakes could the developer have made to make this look OK: That every install would be to “C:\Program Files\SSW SQL Deploy” That every computer would have a “D:\\” That checking in code at 6pm because the had to go home was a good idea. lets solve each of these problems: We are in a web service… lets store data within the web root. So we can call “Server.MapPath(“~/App_Data/SSW SQL Deploy\SampleData”) instead. Never reference an explicit path. If you need some storage for your application use IsolatedStorage. Shelve your code instead. What else could have been done? Code review before check-in – The developer should have shelved their code and asked another dev to look at it. Use Defensive programming – Make sure that any code that has the possibility of failing has checks. Any more options? Let me know and I will add them. What do we do? The correct things to do is to add a Bug to the backlog, but as this is probably going to be fixed in sprint, I will add it directly to the sprint backlog. Right click on the failing test Select “Create Work Item | Bug” Figure: Create an associated bug to add to the backlog. Set the values for the Bug making sure that it goes into the right sprint and Area. Make your steps to reproduce as explicit as possible, but “See test” is valid under these circumstances.   Figure: Add it to the correct Area and set the Iteration to the Area name or the Sprint if you think it will be fixed in Sprint and make sure you bring it up at the next Scrum Meeting. Note: make sure you leave the “Assigned To” field blank as in Scrum team members sign up for work, you do not give it to them. The developer who broke the test will most likely either sign up for the bug, or say that they are stuck and need help. Note: Visual Studio has taken care of associating the failing test with the Bug. Save… Technorati Tags: WCF,MSTest,MSBuild,Team Build 2010,Team Test 2010,Team Build,Team Test

    Read the article

  • Ask the Readers: Which Web Browser Do You Use?

    - by Mysticgeek
    Yesterday we looked at the Browser Ballot Screen, which offers 12 different browsers as alternatives to IE for European Windows users. This got us thinking about this weeks question. What browser do you use for your daily web navigation?   Yesterday we showed you the Browser Ballot Screen which was introduced in March to Windows users in Europe. While it offers the choice of the most well known browsers on the market, there are some obscure choices as well. This got us thinking about what web browser(s) you use at home, in the office, or even on your mobile devices. Some people might have a favorite browser they use at home but are required to use IE at work due to proprietary applications the company uses. Also, if you use an operating system other than Windows, you might favor Safari, Firefox, Konqueror..etc. What web browser do you use? Leave a comment and join in the discussion! Similar Articles Productive Geek Tips Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPSet the Default Browser on Ubuntu From the Command LineAnnouncing the How-To Geek ForumsHow-To Geek Bounty: $103.24(Paid!) for Active Desktop for VistaA Few Things I’ve Learned from Writing at How-To Geek TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File

    Read the article

  • installed openstack using devstack install shell script but getting 500 error when i try opening dashboard

    - by Arvind
    I followed the instructions at http://devstack.org/guides/single-machine.html to install OpenStack. I first installed Ubuntu on my Windows 7 PC using the officially supported Windows installer for Ubuntu 12.04 LTS. And after that I followed the instructions at above page to install OpenStack. As per instructions, I should be able to access the dashboard aka Horizon, at http://192.168.1.4/ (thats the IP of the PC on which I installed Ubuntu-OpenStack). However I am getting a 500 error web page when I open that. How do I resolve this error? I want to set up a dev environment for OpenStack. For your ref, the whole error message is given now-- FilterError at / /usr/bin/env: node: No such file or directory Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Exception Type: FilterError Exception Value: /usr/bin/env: node: No such file or directory Exception Location: /usr/local/lib/python2.7/dist-packages/compressor/filters/base.py in input, line 133 Python Executable: /usr/bin/python Python Version: 2.7.3 Python Path: ['/opt/stack/horizon/openstack_dashboard/wsgi/../..', '/opt/stack/python-keystoneclient', '/opt/stack/python-novaclient', '/opt/stack/python-openstackclient', '/opt/stack/keystone', '/opt/stack/glance', '/opt/stack/python-glanceclient/setuptools_git-0.4.2-py2.7.egg', '/opt/stack/python-glanceclient', '/opt/stack/nova', '/opt/stack/horizon', '/opt/stack/cinder', '/opt/stack/python-cinderclient', '/usr/local/lib/python2.7/dist-packages', '/usr/lib/python2.7', '/usr/lib/python2.7/plat-linux2', '/usr/lib/python2.7/lib-tk', '/usr/lib/python2.7/lib-old', '/usr/lib/python2.7/lib-dynload', '/usr/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages/PIL', '/usr/lib/python2.7/dist-packages/gst-0.10', '/usr/lib/python2.7/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.7', '/usr/lib/python2.7/dist-packages/ubuntu-sso-client', '/usr/lib/python2.7/dist-packages/ubuntuone-client', '/usr/lib/python2.7/dist-packages/ubuntuone-control-panel', '/usr/lib/python2.7/dist-packages/ubuntuone-couch', '/usr/lib/python2.7/dist-packages/ubuntuone-storage-protocol', '/opt/stack/horizon/openstack_dashboard'] Server time: Sat, 27 Oct 2012 08:43:29 +0000 Error during template rendering In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 {% load compress %} 2 3 {% compress css %} 4 <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 {% endcompress %} 6 7 <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 Also, the traceback is now given below-- Environment: Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Python Version: 2.7.3 Installed Applications: ('openstack_dashboard', 'django.contrib.contenttypes', 'django.contrib.auth', 'django.contrib.sessions', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'compressor', 'horizon', 'openstack_dashboard.dashboards.project', 'openstack_dashboard.dashboards.admin', 'openstack_dashboard.dashboards.settings', 'openstack_auth') Installed Middleware: ('django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'horizon.middleware.HorizonMiddleware', 'django.middleware.doc.XViewMiddleware', 'django.middleware.locale.LocaleMiddleware') Template error: In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 : {% load compress %} 2 : 3 : {% compress css %} 4 : <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 : {% endcompress %} 6 : 7 : <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 : Traceback: File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py" in get_response 111. response = callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python2.7/dist-packages/django/views/decorators/vary.py" in inner_func 36. response = func(*args, **kwargs) File "/opt/stack/horizon/openstack_dashboard/wsgi/../../openstack_dashboard/views.py" in splash 38. return shortcuts.render(request, 'splash.html', {'form': form}) File "/usr/local/lib/python2.7/dist-packages/django/shortcuts/__init__.py" in render 44. return HttpResponse(loader.render_to_string(*args, **kwargs), File "/usr/local/lib/python2.7/dist-packages/django/template/loader.py" in render_to_string 176. return t.render(context_instance) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render 155. return self.render_template(self.template, context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render_template 137. output = template.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render 147. return self.render_compressed(context, self.kind, self.mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_compressed 107. rendered_output = self.render_output(compressor, mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_output 119. return compressor.output(mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 51. ret.append(subnode.output(*args, **kwargs)) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 53. return super(CssCompressor, self).output(*args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in output 230. content = self.filter_input(forced) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in filter_input 192. for hunk in self.hunks(forced): File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in hunks 167. precompiled, value = self.precompile(value, **options) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in precompile 210. command=command, filename=filename).input(**kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/filters/base.py" in input 133. raise FilterError(err) Exception Type: FilterError at / Exception Value: /usr/bin/env: node: No such file or directory

    Read the article

  • Running a scheduled task as SYSTEM with console window open

    - by raoulsson
    I am auto creating scheduled tasks with this line within a batch windows script: schtasks /Create /RU SYSTEM /RP SYSTEM /TN startup-task-%%i /TR %SPEEDWAY_DIR%\%TARGET_DIR%%%i\%STARTUPFILE% /SC HOURLY /MO 1 /ST 17:%%i1:00 I wanted to avoid using specific user credentials and thus decided to use SYSTEM. Now, when checking in the taskmanagers process list or, even better, directly with the C:\> schtasks command itself, all is working well, the tasks are running as intended. However in this particular case I would like to have an open console window where I can see the log flying by. I know I could use C:\> tail -f thelogfile.log if I installed e.g. cygwin (on all machines) or some proprietary tools like Baretail on Windows. But since I only switch to these machines in case of trouble, I would prefer to start the scheduled task in such a way that every user immediately sees the log. Any chance? Thanks!

    Read the article

  • Simple scan not working after upgrading to 12.10 (Xubuntu)

    - by mydoghasworms
    Since upgrading to 12.10 (Xubuntu), Simple Scan is not working anymore. I got scanning working with Xsane, but only if Simple Scan has not run before. Otherwise I have to restart the printer/scanner (HP OfficeJet J5783). In kernel.log I see: kernel: [ 1214.120964] usb 2-1.4: >usbfs: process 4412 (simple-scan) did not claim interface 2 before use and in syslog simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: sane_hpaio_cancel: already cancelled! simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/dot4.c 231: unable to read Dot4ReverseReply header: No data available bytesRead=0 simple-scan: io/hpmud/dot4.c 319: invalid DOT4InitReply retrying command... simple-scan: io/hpmud/dot4.c 172: unable to read Dot4ReverseCmd header: No data available simple-scan: io/hpmud/musb.c 1933: invalid Dot4Credit from peripheral simple-scan: io/hpmud/hpmud.c 342: device_cleanup: device uri=hp:/usb/Officejet_J5700_series?serial=CN81LCV0V604TC simple-scan: io/hpmud/hpmud.c 354: device_cleanup: close device dd=1... simple-scan: io/hpmud/hpmud.c 356: device_cleanup: done closing device dd=1 Any ideas?

    Read the article

  • Desktop Fun: 21 Cool Ubuntu Wallpapers

    - by Vivek
    Ubuntu 10.04 was released last month, and comes with some breath taking design enhancements, and has some fabulous art work integrated into it. We’ve put together a collection of wallpapers to make it more customized. We thought of pulling out some of the best Ubuntu wallpapers in this post so that you have a good mix to choose from when you are slightly bored of the default Lucid Lynx (Ubuntu 10.04) wallpaper. The following is a collection of top 21 Ubuntu wallpapers. To download the wallpaper just click on the hyperlink above the image. Ubuntu Wallpapers EgFox Lucid Lynx Blue 2010 by ~Eg-Art EgFox Lucid Lynx K HD 2010 by ~Eg-Art Lucid Lynx 10 04 by ~Momez Ubokeh Wallpaper Pack by ~giantspeck lucid fog brown by ~darkburt EgFox Lucid Lynx HD 2010 by ~Eg-Art LTS 2010 by ~alkore31 Ubuntu Bokeh by ~ttk1opc Ubuntu Aurora by *monkeymagico Ubuntu by ~gorkisview Ubuntu Glow by ~BigAction Destroy Ubuntu by ~lukeroberts Ubuntu Triskell by ~deviantdark Ubuntu 2.0 by ~monsteer Ubuntu leaves by ~sizakor Ubuntu Bokeh by ~freyr Ubuntu Brown leather distress by *monkeymagico Ubuntu Black Metal Hex by *monkeymagico Ubuntu gusty 4 walls by ~yf19-sama Ubuntu Wallpaper by ~Ruzzy2006 ubuntu-Gloss by ~SWOriginal Enjoy the new wallpaper to suit your desktop. You also might want to make sure and check out our Desktop Fun section for more collections of cool wallpapers. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Allow Remote Control To Your Desktop On UbuntuCheck your Disk Usage on Ubuntu from the command lineDual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XPDesktop Fun: Starship Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enhance Your Laptop’s Battery Life With These Tips Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7

    Read the article

  • How can i make changes to this file Encoding?

    - by SuperUserMan
    I have these 3 files 21/08/2014 07:15 PM 122 Tw2AWK.csv 21/08/2014 07:15 PM 125 Tw2Notepad.csv 21/08/2014 07:15 PM 119 Tw2REPL.csv C:\myfilesfile Tw2AWK.csv TwREPL.csv Tw2Notepad.csv Tw2AWK.csv; UTF-8 Unicode text, with CRLF line terminators Tw2REPL.csv; UTF-8 Unicode text Tw2Notepad.csv; UTF-8 Unicode (with BOM) text, with CRLF line terminators HEX of these files is as follows C:\myfilesxxd -p Tw2REPL.csv 0a222344656c686947616e675261706520776173206120736d616c6c2069 6e636964656e7420746f2023536d616c6c5261706973744a6169746c6579 20646e61696e6469612e636f6d2f696e6469612f7265706f72742d69e280 a6207069632e747769747465722e636f6d2f6762565070776637744f22 C:\myfilesxxd -p Tw2AWK.csv 0d0a222344656c686947616e675261706520776173206120736d616c6c20 696e636964656e7420746f2023536d616c6c5261706973744a6169746c65 7920646e61696e6469612e636f6d2f696e6469612f7265706f72742d69e2 80a6207069632e747769747465722e636f6d2f6762565070776637744f22 0d0a C:\myfilesxxd -p Tw2Notepad.csv efbbbf0d0a222344656c686947616e675261706520776173206120736d61 6c6c20696e636964656e7420746f2023536d616c6c5261706973744a6169 746c657920646e61696e6469612e636f6d2f696e6469612f7265706f7274 2d69e280a6207069632e747769747465722e636f6d2f6762565070776637 744f220d0a I want Tw2REPL.csv to look like Tw2Notepad.csv How can I do it? NOTE: I have do this all via command line (batch) . I can use any 3rd party standalone exe's though. I am on Windows XP Please help, its very important for me

    Read the article

  • failed to enable x11 forwarding

    - by Hunt
    I am trying to enable X11 forwarding on my server which is running on FreeBSD 7.1. I have a putty installed in my windows in which i have enabled X11 forwarding by checking on Enable X11 forwarding and specifying following parameter X display location localhost:0 after that i run putty and checked whether X11 is enabled or not by typing following command echo "$DISPLAY" or echo $DISPLAY but i am getting following error DISPLAY: Undefined variable. Even i have installed XManager but in that also i am getting following error The X11 forwarding request was rejected ! To solve this problem, please turn on the X11 forwarding features of the remote SSH server can anyone suggest me how to get rid off this ?

    Read the article

  • Start Debugging in Visual Studio

    - by Daniel Moth
    Every developer is familiar with hitting F5 and debugging their application, which starts their app with the Visual Studio debugger attached from the start (instead of attaching later). This is one way to achieve step 1 of the Live Debugging process. Hitting F5, F11, Ctrl+F10 and the other ways to start the process under the debugger is covered in this MSDN "How To". The way you configure the debugging experience, before you hit F5, is by selecting the "Project" and then the "Properties" menu (Alt+F7 on my keyboard bindings). Dependent on your project type there are different options, but if you browse to the Debug (or Debugging) node in the properties page you'll have a way to select local or remote machine debugging, what debug engines to use, command line arguments to use during debugging etc. Currently the .NET and C++ project systems are different, but one would hope that one day they would be unified to use the same mechanism and UI (I don't work on that product team so I have no knowledge of whether that is a goal or if it will ever happen). Personally I like the C++ one better, here is what it looks like (and it is described on this MSDN page): If you were following along in the "Attach to Process" blog post, the equivalent to the "Select Code Type" dialog is the "Debugger Type" dropdown: that is how you change the debug engine. Some of the debugger properties options appear on the standard toolbar in VS. With Visual Studio 11, the Debug Type option has been added to the toolbar If you don't see that in your installation, customize the toolbar to show it - VS 11 tends to be conservative in what you see by default, especially for the non-C++ Visual Studio profiles. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Why does my PowerBook display “Fixing recursive fault but reboot is needed!” and stop booting?

    - by Blacklight Shining
    I have an old PowerBook G4 that worked (more or less) fine with a previous installation of Ubuntu Desktop 12.04. A few days ago I decided to install Ubuntu Server instead, and got a copy of Ubuntu Server 12.10. The installation seemed to complete successfully, but now, whenever I try to boot the system, it simply halts at some point after I unlock the hard disk. There is a lot of text on the screen (which is normal for me during a boot, except now it's mostly errors and debug information), the last of which is this: [ 26.338228] Fixing recursive fault but reboot is needed! Pressing control command power to force a reboot yields exactly the same results. A search for the error message turned up many temporary solutions involving kernel parameters, but none of them have worked for me. I don't think I can remove the default set of parameters (which I think is quiet splash), but I can pass additional parameters on boot. I've tried booting on AC and battery power, as well as using these combinations of kernel parameters while on battery power: acpi=enable pci=noacpi pci=assign-busse acpi=ht acpi=off nomodeset nomodeset acpi=off Why am I getting this error and how can I fix it?

    Read the article

  • Restore monitor detection to one only or restore start menu to bottom

    - by Mark
    I have a co-worker that is no longer able to see his start menu. He used to have it pinned to the left edge of his screen. I tried to troubleshoot it a bit and discovered if we do Windows + R then "cmd" [enter] the command prompt opens (but we don't see the start menu or run box), meaning the start menu is somewhere, just off screen. Restarting doesn't help. Is there some way to force Windows to think it only has a single monitor? It seems to "think" it has two but there's only one and we can get the Start menu back. Or, is there a way to restore the start menu to the bottom? Additional info We are able to right-click the desktop for display settings, etc. We can also get into Windows Explorer (via Ctrl + E) so if we need any of that to restore settings we can do it.

    Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >