Search Results

Search found 27931 results on 1118 pages for 'custom configuration'.

Page 595/1118 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

• Monit wont start/stop any processes

  - by Vaughan Magnusson

  Hi, I've got monit running on a linux vserver, installed in a custom location /home/user/bin/monit as that is the only suitable location according to the webhost providers. When I installed monit I used ./configure --prefix=/home/user Monit itself runs, and sends me emails of it's activity, and the control file syntax is correct. However, monit cannot seem to start or stop anything - or even run the simplest of scripts. eg. Using 'monit stop all', I try to run the following stop command stop = "/bin/bash /home/user/simple_script.sh" Which fails (and says so in the log). I cant figure out why this is failing, can anyone help with this?

  Read the article

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• "Half" ssh authorization to a server with git repository

  - by hsz

  Hello ! Currently I have purchased web hosting with ssh access. I have created a git repository on it and if I set my public key in ~/.ssh/authorized_keys file, I have access to that repo, I can push/pull data, etc. This solution allows access for every user that has his public key in authorized_keys file. But there is one thing that I want to avoid. Every user can login to the server too and has access to whole ssh account. Is it possible to create a blacklist of users' keys that will not have an access to ssh ? I see it that way: user logs in to a git - ok, allow for every one user logs in to ssh account ~/.profile file is hooked and called a custom script: check user's public key if public key is in ~/.ssh/blacklist_keys call bash exit/logout Is it possible in any way ?

  Read the article

• SharePoint - force user to accept AUP when first logging in etc

  - by Chris W

  We're looking to move a bespoke intranet across to SharePoint. One query that has come up is whether we can do the following easily: When user logs in for the first time they should be forced read and accept an Acceptable Use Policy for the site. Agree a separate agreement that relates to their data being shared with other parties. (Optional) upload their profile photo. They can skip this step if they don't have one but they should be prompted to do it each time they login subsequently. The above is all nice and easy in a bespoke app but I can't see how to do this with SharePoint. Can we build a custom workflow that is tied to the user logging in? So far I can only find how to attach workflows to libraries and lists.

  Read the article

• Working bootable CD now suddenly freezes at starting point

  - by xolstice

  I have this strange problem with a bootable CD I created that uses floppy disk 1.44MB emulation. The PC originally worked with it just fine and booted from the CD several times from the prior occasions I used it. Now for some strange reason it decides to freeze at the point where it displays the following text on the screen and does not proceed further: Boot from ATAPI CD-ROM 1. FD 1.44MB System Type-(00) The other strange thing is that if I put in a Linux bootable installation CD, it boots that without any issues. Everytime I stick this custom made bootable CD in it pulls this freezing act. Has anyone experienced this or know how to correct the problem?

  Read the article

• Group Policy for IE Security Zones

  - by Doug Luxem

  We are currently using the following Group Policy to control the Internet Explorer security zones: User Configuration\Administrative Templates\Windows Components\Internet Explorer\Internet Control Panel\Security Page Then setting the Site to Zone Assignment List with the various values using the following chart: Value Setting ------------------------------ 0 My Computer 1 Local Intranet Zone 2 Trusted sites Zone 3 Internet Zone 4 Restricted Sites Zone This works well; however, users are then unable to edit (or especially add) to their zone settings. Is there a way to lock in our custom zone settings while still giving users the ability to add their own sites to the security zones? Yes, I do realize the slight security risk in opening this up.

  Read the article

• GDM login screen is not displayed with VNC

  - by niboshi

  Hi, I set up VNC server with xinetd. Also configured GDM so that XDMCP is enabled. VNC connection seems okay, but GDM login screen is not shown. Instead I can only see old bare X screen (gray meshed background and X-shaped mouse pointer), which I can't do any interaction with it. What can I do to fix the problem? No log is written below /var/log/. Server distribution: Ubuntu marverick /etc/xinetd.d/vnc is like below: service vnc1024 { disable = no socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -geometry 1024x768 -depth 24 -once securitytypes=none port = 12345 } /etc/gdm/custom.conf: [daemon] [security] DisallowTCP=false [xdmcp] Enable=true [gui] [greeter] [chooser] [debug] [servers] /etc/services is also configured. Thanks

  Read the article

• freeradius maximum session time problem

  - by haw3d

  hello I'm using openvpn and free-radius for control user accounts. for maximum session time for an user, free-radius has sqlcounter.conf that control that, but after a connection has disconnected that is useful and cannot destroy a connection. for control account time dynamically i need another script that do that. but should anytime that a connection has established a trigger run. is anyway to fire a custom trigger or script when a connection has established? or any way to control session time dynamically?

  Read the article

• Network monitoring solution

  - by Hellfrost

  Hello Serverfault ! I have a big distributed system I need to monitor. Background: My system is comprised of two servers, concentrating and controlling the system. Each server is connected to a set of devices (some custom kind of RF controllers, doesnt matter to my question), each device connects to a network switch, and eventually all devices talk to the servers, the protocol between the servers and the devices is UDP, usually the packets are very small, but there are really a LOT of packets. the network is also somewhat complex, and is deployed on a large area physically. i'll have 150-300 of these devices, each generating up to 100+ packets per second, and several network switches, perhaps on 2 different subnets. Question I'm looking for some solution that will allow me to monitor all this mess, how many packets are sent, where, how do they move through the network, bandwidth utilization, throughput, stuff like that. what would you recommend to achieve this? BTW Playing nice with windows is a requirement.

  Read the article

• Can you change the icon of a pinned IE 9 web application? And how do you do it?

  - by Rick Roth

  In IE 9 you have the ability to click and drag an open browser tab to the Windows 7 taskbar and pin the shortcut to the taskbar. This has the effect of creating a pseudo-application experience where the shortcut can have it's own custom jumplist and is not grouped with other IE 9 browser tabs on the taskbar. Windows uses the "shortcut icon" or "favicon" defined in the HTML for the icon on the taskbar. If no shortcut icon is defined, then the generic IE shortcut icon is used. If you have a bunch of these shortcuts pinned to the taskbar that don't have different icons it can be confusing to the user which is which. Can you change the icon of a pinned IE 9 web application? And how do you do it?

  Read the article

• Unable to extend desktop

  - by CSharperWithJava

  I'm trying to hook up my TV to my computer as a gaming/multimedia center but I'm having troubles setting it up. I have a custom built machine running Windows 7 RC. It has an ATI Radeon 4800 video card with 2 dvi output and 1 S-video output. I have an s-video to composite adapter that connects to my tv. (It's an old TV with only Cable, composite, and s-video connections). I can switch the desktop to my TV without a problem, but I can't duplicate or extend my desktop onto it. I've installed the latest drivers and Catalyst Control Center, but it won't let it work any more readily than Windows would. Any suggestions? Would using an s-video cable instead of the adapter change anything? (The only reason I use the adapter is because it came with the graphics card) (Edit) I installed the latest drivers and I can now duplicate the screen (show on one monitor and on the TV), but I still can't extend the desktop.

  Read the article

• Script/ Macro in Excel, by clicking on a cell

  - by Noob Doob

  There's something I want to do in Excel 2010. Specifically, I want to be able to make the open sheet load data from a text file, by clicking -important- on a cell of the current open worksheet. So my specific needs are: If it is possible in some way, to start a macro/script by clicking on a cell. About the script/macro: What would be the preferable, by your opinion, way of implementation. And more specifically, how to automatically import the data needed, only by clicking, without having to continually specify the desirable .txt file each time, only 1 time at max, at start or by using a custom "initalization/configuration" file.

  Read the article

• Sun Java keytool importing EV certificates into a single keystore

  - by ss0

  At my current job we are using tomcat, customers have custom web portals setup on their own local machines. EV certs are new to me, they have 2 part intermediary and a primary certificate. For our product to work it appears I need to get all three parts installed under a single keystore entry. How can I roll all three parts into a single x.509 compliant file for import? They syntax I am using is as follows: /blah/system/j2sdk/bin/keytool -import -alias foo -keystore /zix/system/jdk1.5.0_06/jre/lib/security/cacerts -file certname.pem -trustcacerts where foo = the keystore name and certname.pem is the main cert. I have tried importing the intermediate certs under their own names into the keystore and I don't know if it's just the product I have to work with (not vanilla tomcat) or what but it doesn't see those. I have seen a working system and all three certs were under the single keystore alias. Anyone have any ideas?

  Read the article

• Modifying %HOME% on Emacs 24.3 on Windows causes .emacs to not be found

  - by David

  In order for magit to read my git settings on Emacs 24.3.1 for Windows, I added the following configuration from a stack overflow post: (when (string-equal system-type "windows-nt") (setenv "HOME" (concat (getenv "HOMEDRIVE") (getenv "HOMEPATH"))) Interestingly, after this is added to my .emacs, Emacs thinks .emacs doesn't exist anymore. If I do M-x cd to ~ and then do M-x pwd it says ~ is located at C:\Users\Me\AppData\Roaming. It appears that emacs is reading the .emacs settings file because it loads my custom theme. However, if I try to find ~/.emacs Emacs doesn't see it. The file has all permissions on the file system for any user.

  Read the article

• Different Apache log file for each subdomain?

  - by consolibyte

  Is it possible to configure Apache to use a different log file for each subdomain, even if all of the subdomains are within the same VirtualHost container? So, I have only one VirtualHost: <VirtualHost *:80> ServerName example.com ServerAlias test1.example.com test2.example.com test3.example.com </VirtualHost> And I want to end up with the following log files: /var/log/httpd-access_test1.log /var/log/httpd-access_test2.log /var/log/httpd-access_test3.log I know I can probably do this with a custom log format and split-logs, but I was wondering if there's a way to just have Apache do it for me.

  Read the article

• How can Nagios handle non-threshold based plugins?

  - by FliesLikeABrick

  I am writing a Nagios plugin to monitor trends of a certain storage resource utilization (e.g. gradual increases are fine, but an instantaneous/sudden increase or decrease in resource usage may indicate a problem). For what it's worth, it is reviewing the last N entries in an RRD file generated by a custom cacti data source/templates. What is the "right" way to handle Nagios notification config/implementation for this? The problem is that it the plugin would exit as warning/critical for one polling period, but in the next it would be fine (or 3 polling periods later, if I look at 3 polling periods worth of data). I guess the question is: should I just write it in such a way that it will alert for X polling periods, or should I find a way to write it such that manual intervention is required for it to clear (such as logging into the monitoring server or hitting a URL to run a script that submits a passive result)? Your input is appreciated, and if you have any tips for how to implement the latter I'm open to them (I can think of a few ways to possibly implement it)

  Read the article

• Installing Linux kernel 2.6.25.14 on RHEL 5.4

  - by aaron

  I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

  Read the article

• mod_access for lighttpd causes a 403 error for all POST requests

  - by Sam

  I have found on my debian server that running the lighttpd module mod_access is causing the server to response with a 403 to all POST requests. It's very odd as I have two servers, one is running as I'd expect and the other keeps returning these 403's. They are running identical configs for lighttpd and php. My lighttpd.conf is: https://gist.github.com/4269500 There is also one other custom conf: https://gist.github.com/4269508 I've opened up the servers for requests until I get this fixed, the server that works is http://mercury.isitup.org/ and the one that fails is http://venus.isitup.org/. After working out that disabling mod_access resolves the problem I greped all my lighttpd configs for uses of it (docs). Disabling each line I found didn't help, leading me to think this is perhaps some default behaviour (or bug?)... Has anyone come across this before or know what configuration value I've got wrong? Versions Debian: Debian GNU/Linux 6.0.6 (squeeze) Lighttpd: lighttpd/1.4.28 (ssl) PHP: PHP 5.3.19-1~dotdeb.0 with Suhosin-Patch (cli)

  Read the article

• Displaying Nagios on a 52" 1080p screen

  - by gdm

  I'm using a 52" 1080p LCD screen to monitor Nagios, positioned where most of the users can see it. Using the default Nagios web view sort of sucks, since you need to increase the text size a decent amount so it's legible from a distance, and then the "Current Network Status", "Host Status Totals", and other boxes along the top take up the majority of the screen realestate; you can't really see the list of host details. Is there a custom view for Nagios, or a plugin, or something available which is meant to display Nagios details on a large screen with large text?

  Read the article

• How to go about scheduling a task in windows 7 to change wireless connection

  - by Skindeep2366

  This may or not be something that can be done. I cannot find anything on the wireless connection manager built into windows 7 let alone methods for passing params into it. Problem is as follows: I have 2 wireless routers. One provides internet access, the other provides sole access to the local network. Every day at 4am the main system creates a backup in 2 locations. One is a External usb drive, the other is a location on the network. This is all cool if it is remembered to change over to the local network router before leaving. But if it is forgotten the roof will collapse, the walls will burn, and I will be... well you get the idea. Solution: there is already a custom event that fires a automated backup program at 4am everyday. I need someway to force the wireless network to use the correct connection at say 3:58am everyday. Any ideas????

  Read the article

• Cloud services, Public IPs and SIP

  - by Guido N

  I'm trying to run a custom SIP software (which uses JAIN SIP 1.2) on a cloud box. What I'd really like is to have a real public IP aka which is listed by "ifconfig -a" command. This is because atm I don't want to write additional SIP code / add a SIP proxy in order to manage private IP addresses / address translation. I gave Amazon EC2 a go, but as reported here http://stackoverflow.com/questions/10013549/sip-and-ec2-elastic-ips it's not fit for purpose (they do a 1:1 NAT translation between the private IP of the box and its Elastic IP). Does anyone know of a cloud service that provides real static public IP addresses?

  Read the article

• mount dev, proc, sys in a chroot environment?

  - by Patrick

  I'm trying to create a Linux image with custom picked packages. I followed the guide here http://www.olpcnews.com/forum/index.php?topic=4766.0 However, when I tried to install some packages, it failed to configure due to missing the proc, sys, dev directories. So, I learned from other places that I need to "mount" the host proc, ... directories to my chroot environment. Though, I saw two syntax and am not sure which one to use. In host machine: mount --bind /proc <chroot dir>/proc and another syntax (in chroot envrionment): mount -t proc none /proc Which one should I use, and what are the difference? Edit: What I'm trying to do is to hand craft the packages I'm going to use on an XO laptop, because compiling packages takes really long time on the real XO hardware, if I can build all the packages I need and just flash the image to the XO, I can save time and space.

  Read the article

• Linux file permissions not being preserved

  - by yellavon

  I am deploying some custom software as root (a necessity for this situation). I set the owner/group to user1:user1 and set all the files to 644 beforehand in shell, then copy and deploy with ant. However, when files get copied over from the deployment directory, the ownership changes back to root and all the files install with 666 permissions. This seems to occur whether the file is overwritten or newly created. I believe there is a way to set an option in cp, mv commands to preserve permissions, but that would be a lot of commands to change. How can I fix this? Is there some setting I can change temporarily for root so the install always preserves the file permissions?

  Read the article

• How to display a graph only for business hours with CACTI?

  - by Blast Raider

  I have noticed that I can only display an uninterrupted period with Cacti. I am wondering whether is possible or not to make a custom graph which displaying only the business hours during a period (a week, a month, etc.). If it is possible, how could I configure it on Cacti ? For example, I would like to be able to display a graph with an average inbound/outbound traffic between 8am and 7pm for 5 business days a week of the last month. I would apreciate any help. Thank you.

  Read the article

• What is the easiest way to get XtraDB for MySQL running on CentOS 5

  - by Jeremy Clarke

  I'm having a lot of issues with a dedicated MySQL server and it seems like upgrading to the XtraDB version of InnoDB will probably have a positive effect, but I'm hesitant to get involved with it since I am not really a sysadmin and prefer to stick with things that start with "yum update". What is the easiest way to get XtraDB installed? Should I use the Percona server? MariaDB? OurDelta? Is there a way to avoid using custom RPMs and sticking to a repo instead? The current yum version of MySQL is 5.0.xx, whereas a lot of the alternate MySQL builds are based on 5.1.xx. How does this factor in? Do I need to figure out 5.1 on CentOS before working on getting XtraDB in? For bonus points: Do I need to seriously test XtraDB with my server before implementing it, or is it relatively safe to have the brief downtime for switching servers followed by putting the site back online with XtraDB?

  Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >