Search Results

Search found 37616 results on 1505 pages for 'model driven development'.

Page 595/1505 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

• What is causing these visual artifacts on my OpenGL sprites?

  - by Amplify91

  What could be the cause of the defects in my characters sprite? I am using OpenGL ES 2.0. I draw my sprites in a sprite batch that uses UV coordinates from one large texture atlas. If you look around the character' edges, you'll see two noticeable problems: The invisible alpha background is not invisible, but shows a strange static-like background. There are unwanted streaks where the character nears the edge of the frame (but only in some frames of the animation, this happened to be one of them). Any idea what could be causing these? I will provide related code if asked for, but I'll try to avoid just dumping the entire project and expecting someone to look through it all. EDIT: Here's a bit of code: This is how I generate my UV coordinates: private float[] createFrameUV(int frameWidth, int frameHeight, int x, int y){ float[] uv = new float[4]; if(numberOfFrames>1){ float width = (float)frameWidth / (float)mBitmap.getWidth(); float height = (float)frameHeight / (float)mBitmap.getHeight(); float u = (float)x / (float)mBitmap.getWidth(); float v = (float)y / (float)mBitmap.getHeight(); uv[0] = u; uv[1] = v; uv[2] = u + width; uv[3] = v + height; }else{ uv[0] = 0f; uv[1] = 0f; uv[2] = 1f; uv[3] = 1f; } return uv; } These are some OpenGL settings: GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MIN_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_MAG_FILTER, GLES20.GL_LINEAR); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_S, GLES20.GL_CLAMP_TO_EDGE); GLES20.glTexParameterf(GLES20.GL_TEXTURE_2D, GLES20.GL_TEXTURE_WRAP_T, GLES20.GL_CLAMP_TO_EDGE);

  Read the article

• How to do directional per fragment lighting in world space?

  - by user

  I am attempting to create a GLSL shader for simple, per-fragment directional light. So far, after following many tutorials, I have continually ran into the issue: my light is specified in world coordinates, however, the shader treats the light's position as being in eye space, thus, the light direction changes when I move the camera. My question is, how to I transform a directional light position such as (50, 50, 50, 0) into eye space, or, would doing things this way be the incorrect approach to the problem?

  Read the article

• Cocos2d Tiled Dynamic Object Layer

  - by Rodrigo Camargo

  I'm trying to develop a cocos2d tiled based game using a sort of 'dynamic' object layer. What I want to do is after the tiled map is loaded, the user can drag something into the map and that will become an event when the 'hero' pass over it. I know how to build an object layer in tiled but it seems that is for fixed positions and what I want is a dynamic action position based on what the user can select. For instance, the user can drag a rock into a tile and when the character hit that rock he may die, or something. I'm a little lost about how to make it work. Do you have any idea of what should I use or what should I look for? Thanks in advance!

  Read the article

• AndEngine Box2d game

  - by OneMoreVladimir

  I'm developing a 2d survival shooter using Box2d extension and I've got some questions: I have two AnalogOnScreenControls. Their listeners modify both sprites and bodies. I receive TouchEventPool was exhausted and as their number grows the game crashes accidently. I've tried to put the modification of the bodies and sprites on the UpdateThread but that does not solve the problem. What could be the cause? I have a class that at the beginnig of the game loads all the textures. After I relaunch the game activity several times I receive Unable to find Phys Addr for and "green color" interface. But that doesn't happen if I clear the memory manually through the Task Manager before relaunch What could be the cause? I unload my atlas at the end of the game. The game sometimes crashes at start with NullPointerException in onResumeGame. The solution suggested is to set android:configChanges="orientation|screenSize" but my device is API 10 so it doesn't have screenSize property and orientation only does not seem to help, because the game starts in portrait mode at times (though landscape is set in the code)

  Read the article

• Particle effect after the bullet

  - by Siddharth

  In my game, I fire a bullet from the gun along with that I generate a particle behind the bullet so that I look like fire effect after the bullet. But my problem is that the position I got from the bullet was distance in place. So basically I want to say that the bullet speed was high for that reason I got coordinate for the particle generation was far from each other like dot dot effect. But I want continuous flow of particle behind the bullet. So please provide any guidance for my problem

  Read the article

• How to properly do weapon cool-down reload timer in multi-player laggy environment?

  - by John Murdoch

  I want to handle weapon cool-down timers in a fair and predictable way on both client on server. Situation: Multiple clients connected to server, which is doing hit detection / physics Clients have different latency for their connections to server ranging from 50ms to 500ms. They want to shoot weapons with fairly long reload/cool-down times (assume exactly 10 seconds) It is important that they get to shoot these weapons close to the cool-down time, as if some clients manage to shoot sooner than others (either because they are "early" or the others are "late") they gain a significant advantage. I need to show time remaining for reload on player's screen Clients can have clocks which are flat-out wrong (bad timezones, etc.) What I'm currently doing to deal with latency: Client collects server side state in a history, tagged with server timestamps Client assesses his time difference with server time: behindServerTimeNs = (behindServerTimeNs + (System.nanoTime() - receivedState.getServerTimeNs())) / 2 Client renders all state received from server 200 ms behind from his current time, adjusted by what he believes his time difference with server time is (whether due to wrong clocks, or lag). If he has server states on both sides of that calculated time, he (mostly LERP) interpolates between them, if not then he (LERP) extrapolates. No other client-side prediction of movement, e.g., to make his vehicle seem more responsive is done so far, but maybe will be added later So how do I properly add weapon reload timers? My first idea would be for the server to send each player the time when his reload will be done with each world state update, the client then adjusts it for the clock difference and thus can estimate when the reload will be finished in client-time (perhaps considering also for latency that the shoot message from client to server will take as well?), and if the user mashes the "shoot" button after (or perhaps even slightly before?) that time, send the shoot event. The server would get the shoot event and consider the time shot was made as the server time when it was received. It would then discard it if it is nowhere near reload time, execute it immediately if it is past reload time, and hold it for a few physics cycles until reload is done in case if it was received a bit early. It does all seem a bit convoluted, and I'm wondering whether it will work (e.g., whether it won't be the case that players with lower ping get better reload rates), and whether there are more elegant solutions to this problem.

  Read the article

• collision detection problems - Javascript/canvas game

  - by Tom Burman

  Ok here is a more detailed version of my question. What i want to do: i simply want the have a 2d array to represent my game map. i want a player sprite and i want that sprite to be able to move around my map freely using the keyboard and also have collisions with certain tiles of my map array. i want to use very large maps so i need a viewport. What i have: I have a loop to load the tile images into an array: /Loop to load tile images into an array var mapTiles = []; for (x = 0; x <= 256; x++) { var imageObj = new Image(); // new instance for each image imageObj.src = "images/prototype/"+x+".jpg"; mapTiles.push(imageObj); } I have a 2d array for my game map: //Array to hold map data var board = [ [1,2,3,4,3,4,3,4,5,6,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [17,18,19,20,19,20,19,20,21,22,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [33,34,35,36,35,36,35,36,37,38,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [49,50,51,52,51,52,51,52,53,54,1,1,1,1,1,1,1,1,1,1,1,1,1,197,198,199,1,1,1,1], [65,66,67,68,146,147,67,68,69,70,1,1,1,1,1,1,1,1,216,217,1,1,1,213,214,215,1,1,1,1], [81,82,83,161,162,163,164,84,85,86,1,1,1,1,1,1,1,1,232,233,1,1,1,229,230,231,1,1,1,1], [97,98,99,177,178,179,180,100,101,102,1,1,1,1,59,1,1,1,248,249,1,1,1,245,246,247,1,1,1,1], [1,1,238,1,1,1,1,239,240,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [216,217,254,1,1,1,1,255,256,1,204,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [232,233,1,1,1,117,118,1,1,1,220,1,1,119,120,1,1,1,1,1,1,1,1,1,1,1,119,120,1,1], [248,249,1,1,1,133,134,1,1,1,1,1,1,135,136,1,1,1,1,1,1,59,1,1,1,1,135,136,1,1], [1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,216,217,1,1,1,1,1,1,60,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,232,233,1,1,1,1,1,1,1,1,1,1,1,1,1,1,204,1,1,1,1,1,1,1,1,1,1,1], [1,1,248,249,1,1,1,1,1,1,1,1,1,1,1,1,1,1,220,1,1,1,1,1,1,216,217,1,1,1], [1,1,1,1,1,1,1,1,1,1,1,1,149,150,151,1,1,1,1,1,1,1,1,1,1,232,233,1,1,1], [12,12,12,12,12,12,12,13,1,1,1,1,165,166,167,1,1,1,1,1,1,119,120,1,1,248,249,1,1,1], [28,28,28,28,28,28,28,29,1,1,1,1,181,182,183,1,1,1,1,1,1,135,136,1,1,1,1,1,1,1], [44,44,44,44,44,15,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,59,1,1,197,198,199,1,1,1,1,119,120,1], [1,1,1,1,1,27,28,29,1,1,216,217,1,1,1,1,1,1,1,1,213,214,215,1,1,1,1,135,136,1], [1,1,1,1,1,27,28,29,1,1,232,233,1,1,1,1,1,1,1,1,229,230,231,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,248,249,1,1,1,1,1,1,1,1,245,246,247,1,1,1,1,1,1,1], [1,1,1,197,198,199,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,213,214,215,28,29,1,1,1,1,1,60,1,1,1,1,204,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,229,230,231,28,29,1,1,1,1,1,1,1,1,1,1,220,1,1,1,1,119,120,1,1,1,1,1], [1,1,1,245,246,247,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,135,136,1,1,60,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1], [1,1,1,1,1,27,28,29,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1] ]; I have my loop to place the correct tile sin the correct positions: //Loop to place tiles onto screen in correct position for (x = 0; x <= viewWidth; x++){ for (y = 0; y <= viewHeight; y++){ var width = 32; var height = 32; context.drawImage(mapTiles[board[y+viewY][x+viewX]],x*width, y*height); } } I Have my player object : //Place player object context.drawImage(playerImg, (playerX-viewX)*32,(playerY-viewY)*32, 32, 32); I have my viewport setup: //Set viewport pos viewX = playerX - Math.floor(0.5 * viewWidth); if (viewX < 0) viewX = 0; if (viewX+viewWidth > worldWidth) viewX = worldWidth - viewWidth; viewY = playerY - Math.floor(0.5 * viewHeight); if (viewY < 0) viewY = 0; if (viewY+viewHeight > worldHeight) viewY = worldHeight - viewHeight; I have my player movement: canvas.addEventListener('keydown', function(e) { console.log(e); var key = null; switch (e.which) { case 37: // Left if (playerY > 0) playerY--; break; case 38: // Up if (playerX > 0) playerX--; break; case 39: // Right if (playerY < worldWidth) playerY++; break; case 40: // Down if (playerX < worldHeight) playerX++; break; } My Problem: I have my map loading an it looks fine, but my player position thinks it's on a different tile to what it actually is. So for instance, i know that if my player moves left 1 tile, the value of that tile should be 2, but if i print out the value it should be moving to (2), it comes up with a different value. How ive tried to solve the problem: I have tried swap X and Y values for the initialization of my player, for when my map prints. If i swap the x and y values in this part of my code: context.drawImage(mapTiles[board[y+viewY][x+viewX]],x*width, y*height); The map doesnt get draw correctly at all and tiles are placed all in random positions or orientations IF i sway the x and y values for my player in this line : context.drawImage(playerImg, (playerX-viewX)*32,(playerY-viewY)*32, 32, 32); The players movements are inversed, so up and down keys move my player left and right viceversa. My question: Where am i going wrong in my code, and how do i solve it so i have my map looking like it should and my player moving as it should as well as my player returning the correct tileID it is standing on or moving too. Thanks Again ALSO Here is a link to my whole code: prototype

  Read the article

• Dynamic body implementation

  - by ArturoVM

  I am writing a 2D game where one of the characters has some very particular requirements. This character is a body with no particular shape (similar to a fluid, but not so much), it has to be able to grow and shrink (as in actually growing, not just scaling), and it has to have collision detection (even if it's basic). Because of this requirements, it obviously can't be based on a sprite, so direct rendering of the shape should be the logical thing to do. I assume this is no easy task, but I just couldn't find a good physics engine that covers these requirements (or at least no tutorial on how to do it; I particularly searched for Box2D tutorials). Is there a way of doing this with Box2D, SDL, or any other physics or game engine out there? If not, what's a good place to start? I am really clueless as far as soft-body physics are concerned.

  Read the article

• Proper updating of GeoClipMaps

  - by thr

  I have been working on an implementation of gpu-based geo clip maps, but there is a section of the GPU Gems 2 article that i just can't seem to understand, specifically this paragraph and more precisely the bolded part: The choice of grid size n = 2k-1 has the further advantage that the finer level is never exactly centered with respect to its parent next-coarser level. In other words, it is always offset by 1 grid unit either left or right, as well as either top or bottom (see Figure 2-4), depending on the position of the viewpoint. In fact, it is necessary to allow a finer level to shift while its next-coarser level stays fixed, and therefore the finer level must sometimes be off-center with respect to the next-coarser level. An alternative choice of grid size, such as n = 2k-3, would provide the possibility for exact centering Let's take an example image from the article: My "understanding" of the way the clip maps were update was that you floor the position of the viewpoint to an int, and such get the center vertex point if this is not the same as the previous center point, you update the entire map. Now, this obviously is not the case - but what I am failing to understand is this: If you look at the image above, if the viewpoint was to move one unit to the right, then the inner ring (the one just around the view point + white center square) would end up getting a 1 unit space on both the left and right side of itself. But there is nothing in the paper that deals with this, what i mean is that it would end up looking like this (excuse my crummy cut-and-paste editing of the above image): This is obviously not a valid state of the. So, would the solution be that a clip ring (layer) can only move in increments of the ring/layer it's contained within? Wouldn't this end up being very restrictive? I feel like I am missing some crucial understanding of parts of the algorithm, but I have been over both this paper and the original paper from 2004 and I just can't see what I am not getting.

  Read the article

• Render a 3D scene in multiple windows - extended panoramic view

  - by teodron

  Is there any resource location on how to view a 3D scene from an application or a game on multiple windows or monitors? Each window should continue drawing from where the neighbouring one left off (in the end, the result should be a mosaic of the scene). My idea is to use a camera for each window and have a reference position and orientation for a meta-camera object that is used to correctly offset the other camera. Since there are quite some elements to consider (window specs, viewport properties, position-orientation of each render camera), what is the correct way to update the individual cameras considering the position and orientation of the central, meta-camera? I currently cannot make the cameras present the scene contiguously (and I am reluctant in working out the transformations without checking whether this is the actual way of doing things).

  Read the article

• Sanity checks vs file sizes

  - by Richard Fabian

  In your game assets do you make room for explicit sanity checks, or do you have some generally expected bounds which you assert? I've been thinking about how we compress data and thought that it's much better to have the former, and less of the latter. If your data can exceed your normal valid ranges, but if it does it's an error, then surely that implies you're not compressing the data well enough? What do you do to find out if your data is compressed as far as it can be, and what do you use to ensure your data isn't corrupted and ensure it's an official release? EDIT I'm not interested in sanity checking the file size, but instead, how you manage your sanity checks and whether you arrange the excess size caused by the opportunity to do sanity checks by using explicit extra data, or through allowing the data enough file space (data member size) to be out of valid range and thus able to be checked merely by looking at the asset in memory after loading.

  Read the article

• Simplest way to render image over top of another with another image used as mask in OpenGL?

  - by Adam Naylor

  The effect I'm looking for is to have a single large background image that is always visible (at full alpha) and then show a second image (what I call a light map or specular map) that is partially shown over the top based on a third image (which is effectively a mask). The effect is similar to this effect except instead of simply darkening or lightening the background image using the third image it needs to mask the second without effecting the first at all. The third image is the only one that moves therefore hard baking the third images alpha into the second image isn't an option. If my explanation isn't clear I'll provide visual examples when I have more time. I'd prefer not to go down a shader route as I haven't taught myself this area yet so unless I have too I'd rather try to achieve this with simple alpha blending. Happy to use a shader approach. Cheers. Additional These third images are obviously light sources being cast onto the first image showing the specular information from the second image to simulate the light 'shining' off the objects in the first image. The solution I implement will need to allow two light sources to potentially overlap so my current thoughts are that the alpha values of the two images will need to be combined (Added?) to produce a final image which masks the second image? Don't worry about things like coloured lights. For this technique the lights are all considered white.

  Read the article

• Render graphics using Doubles in Graphics2D

  - by thedeadlybutter

  Currently, I have a JFrame for my game to render in, and I'm using Graphics2D for drawing (The games graphics are fairly simple 2D sprites). However, my delta variable is a double, and all of the Graphics 2D methods (And Grpahics) use int. I tried to type cast the delta to an int, but it just rounds down to 0. So my question is, how can I render graphics using Graphics2D in Java with coordinates that are doubles. Can I convert it to work with Graphics2D if there is no built in way? Or, is there a graphics library that can support doubles for coordinates?

  Read the article

• Creating a frozen bubble clone

  - by Vaughan Hilts

  This photo illustrates the environment: http://i.imgur.com/V4wbp.png I'll shoot the cannon, it'll bounce off the wall and it's SUPPOSED to stick to the bubble. It does at pretty much every other angle. The problem is always reproduced here, when hit off the wall into those bubbles. It also exists in other cases, but I'm not sure what triggers it. What actually happens: The ball will sometimes set to the wrong cell, and my "dropping" code will detect it as a loner and drop it off the stage. *There are many implementations of "Frozen Bubble" on the web, but I can't for the life of me find a good explanation as to how the algorithm for the "Bubble Sticking" works. * I see this: http://www.wikiflashed.com/wiki/BubbleBobble https://frozenbubblexna.svn.codeplex.com/svn/FrozenBubble/ But I can't figure out the algorithims... could anyone explain possibly the general idea behind getting the balls to stick? Code in question: //Counstruct our bounding rectangle for use var nX = currentBall.x + ballvX * gameTime; var nY = currentBall.y - ballvY * gameTime; var movingRect = new BoundingRectangle(nX, nY, 32, 32); var able = false; //Iterate over the cells and draw our bubbles for (var x = 0; x < 8; x++) { for (var y = 0; y < 12; y++) { //Get the bubble at this layout var bubble = bubbleLayout[x][y]; var rowHeight = 27; //If this slot isn't empty, draw if (bubble != null) { var bx = 0, by = 0; if (y % 2 == 0) { bx = x * 32 + 270; by = y * 32 + 45; } else { bx = x * 32 + 270 + 16; by = y * 32 + 45; } //Check var targetBox = new BoundingRectangle(bx, by, 32, 32); if (targetBox.intersects(movingRect)) { able = true; } } } } cellY = Math.round((currentBall.y - 45) / 32); if (cellY % 2 == 0) cellX = Math.round((currentBall.x - 270) / 32); else cellX = Math.round((currentBall.x - 270 - 16) / 32); Any ideas are very much welcome. Things I've tried: Flooring and Ceiling values Changing the wall bounce to a lower value Slowing down the ball None of these seem to affect it. Is there something in my math I'm not getting?

  Read the article

• Tips and Tools for creating Spritesheet animations

  - by Spooks

  I am looking for a tool that I can use to create sprite sheet easily. Right now I am using Illustrator, but I can never get the center of the character in the exact position, so it looks like it is moving around(even though its always in one place), while being loop through the sprite sheet. Is there any better tools that I can be using? Also what kind of tips would you give for working with a sprite sheet? Should I create each part of the character in individual layers (left arm, right arm, body, etc.) or everything at once? any other tips would also be helpful! thank you

  Read the article

• Are there any good guides for making mods for Minecraft?

  - by Pureferret

  I've been coding in Java for 5 months at work now, and having past experience with programming in other languages, modifying existing code at Uni etc. I feel like I want to get started on (read: continue learning to program by) modding with minecraft. I know what I need, but not exactly how to do so. I once saw some good guides on the minecraft forum, but they all explained how to write in java, hows different classes in the code work etc. I'm more interested in how you decompile the code, write your own separate from the main 'trunk' of minecraft and then package it to install with a tool like 'Magic Loader'. My issue with these guides is that they always relied on being in windows, but I'm primarily a linux user, and the guides on the forums only seemed to assume you were on a Windows box. So is there a good 'walkthrough' for modding for Minecraft? Especially one where it assumes or at least allows for the fact you are in linux?

  Read the article

• XNA Shader Texture Memory

  - by Alex

  I was wondering about texture optimization in XNA 4.0. Will the the contentmanager send the texturedata to the GPU directly when the texture gets loaded or do I send the texture data to the GPU when I declare a texture in my shader. If that's the case, what happens if I have 5 shaders all using the same texture, does that mean that I send 5 instances of that texture data to the gpu or am I simply telling the GPU what preloaded texture to use? Or does XNA do the heavy lifting in the background?

  Read the article

• The practical cost of swapping effects

  - by sebf

  Hello, I use XNA for my projects and on those forums I sometimes see references to the fact that swapping an effect for a mesh has a relatively high cost, which surprises me as I thought to swap an effect was simply a case of copying the replacement shader program to the GPU along with appropriate parameters. I wondered if someone could explain exactly what is costly about this process? And put, if possible, 'relatively' into context? For example say I wanted to use a short shader to help with picking, I would: Change the effect on every object, calculting a unique color to identify it and providing it to the shader. Draw all the objects to a render target in memory. Get the color from the target and use it to look up the selected object. What portion of the total time taken to complete that process would be spent swapping the shaders? My instincts would say that rendering the scene again, no matter how simple the shader, would be an order of magnitude slower than any other part of the process so why all the concern over effects?

  Read the article

• OpenGL 2D Rasterization Sub-Pixel Translations

  - by Armin Ronacher

  I have a tile based 2D engine where the projection matrix is an orthographic view of the world without any scaling applied. Thus: one pixel texture is drawn on the screen in the same size. That all works well and looks nice but if the camera makes a sub-pixel movement small lines appear between the tiles. I can tell you in advance what does not fix the problem: GL_NEAREST texture interpolation GL_CLAMP_TO_EDGE What does “fix” the problem is anchoring the camera to the nearest pixel instead of doing a sub-pixel translation. I can live with that, but the camera movement becomes jerky. Any ideas how to fix that problem without resorting to the rounding trick I do currently?

  Read the article

• Collision within a poly

  - by G1i1ch

  For an html5 engine I'm making, for speed I'm using a path poly. I'm having trouble trying to find ways to get collision with the walls of the poly. To make it simple I just have a vector for the object and an array of vectors for the poly. I'm using Cartesian vectors and they're 2d. Say poly = [[550,0],[169,523],[-444,323],[-444,-323],[169,-523]], it's just a pentagon I generated. The object that will collide is object, object.pos is it's position and object.vel is it's velocity. They're both 2d vectors too. I've had some success to get it to find a collision, but it's just black box code I ripped from a c++ example. It's very obscure inside and all it does though is return true/false and doesn't return what vertices are collided or collision point, I'd really like to be able to understand this and make my own so I can have more meaningful collision. I'll tackle that later though. Again the question is just how does one find a collision to walls of a poly given you know the poly vertices and the object's position + velocity? If more info is needed please let me know. And if all anyone can do is point me to the right direction that's great.

  Read the article

• SelectList in Asp-mvc and data from the database

  - by George

  Hello guys. I'm having some troubles with SelectList in ASP.MVC. Here is the issue: I have a Create View and begind a ViewModel model. The page load just fine (GET verb). But when posting, something happens, and my model is considered invalid, and it cannot insert. Here's what i've tried so far. public class DefinitionFormViewModel { private Repository<Category> categoryRepository = new Repository<Category>(); public Definition ViewDefinition { get; private set; } public SelectList Categories { get; private set; } public DefinitionFormViewModel(Definition def) { ViewDefinition = def; // here i wanted to place it directly, like shown in NerdDinner Tutorial // new SelectList(categoryRepository.All(),ViewDefinition.Category); Categories = new SelectList(categoryRepository.All(), "CategoryId", "CategoryName", ViewDefinition.CategoryId); } } // pageview which inherits DefinitionFormViewModel <div class=editor-field"> <%= Html.DropDownList("Category",Model.Categories) %> <%= Html.ValidationMessageFor(model => Model.ViewDefinition.Category) %> </div> // controller methods [Authorize] public ActionResult Create() { Definition definition = new Definition(); return View(new DefinitionFormViewModel(definition)); } [AcceptVerbs(HttpVerbs.Post), Authorize] public ActionResult Create(int id,Definition definition) { Term term = termRepository.SingleOrDefault(t => t.TermId == id); if (term == null) { return View("NotFound", new NotFoundModel("Termo não encontrado", "Termo não encontrado", "Nos desculpe, mas não conseguimos encontrar o termo solicitado.", "Indíce de Termos", "Index", "Term")); } else { if (ModelState.IsValid) { try { definition.TermId = term.TermId; definition.ResponsibleUser = User.Identity.Name; UpdateModel(definition); term.Definitions.Add(definition); termRepository.SaveAll(); return RedirectToAction("Details", "Term", new { id = term.TermId }); } catch (System.Data.SqlClient.SqlException sqlEx) { ModelState.AddModelError("DatabaseError", "Houve um erro na inserção desta nova definição"); } catch { foreach (RuleViolation rv in definition.GetRuleViolations()) { ModelState.AddModelError(rv.PropertyName, rv.ErrorMessage); } } } } return View(new DefinitionFormViewModel(definition)); } I'm sorry about the long post, but I cant figure this out. I got no graphic errors or exceptions. My execution terminates in if (ModelState.IsValid). Thanks for your time George

  Read the article

• 2D Car Simulation with Throttle Linear Physics

  - by James

  I'm trying to make a simulation game for an automatic cruise control system. The system simulates a car on varying inclinations and throttle speeds. I've coded up to the car physics but these do note make sense. The dynamics of the simulation are specified as follows: a = V' - V T = (k1)V + ?(k2) + ma V' = (1 - (k1 / m) V) + T - ( k2 / m) * ? Where T = throttle position k1 = viscous friction V = speed V' = next speed ? = angle of incline k2 = m g sin ? a = acceleration m = mass Notice that the angle of incline in the equation is not chopped up by sin or cos. Even the equation for acceleration isn't right. Can anyone correct them or am I misinterpreting the physics?

  Read the article

• Camera movement and threshold not working

  - by irish guy mcconagheh

  I have a platformer that is in progress, part of this has a camera which I only want to move when the character moves out of a certain threshold, to try to accomplish this I have the following if statement: if(((Mathf.Abs(target.transform.position.x))-(Mathf.Abs(transform.position.x)))>thres){ x = moveTo(transform.position.x, target.position.x, trackSpeed); } in unity/c#. In pseudocode it means if((absolute value of player x) - (absolute value of camera x) is greater than the threshold){ move { however this does not seem to work correctly. it appears to work for the first couple of times the threshold is reached, however the distance between the camera and the player has to increase every time for the camera to move. I do not believe the movement of the camera is the problem, however the code for it is as follows: private float moveTo(float n, float target, float accel) { if (n == target) { return n; } else { float dir = Mathf.Sign(target - n); n += accel * Time.deltaTime * dir; return (dir == Mathf.Sign(target-n))? n: target; } } }

  Read the article

• Implementing Circle Physics in Java

  - by Shijima

  I am working on a simple physics based game where 2 balls bounce off each other. I am following a tutorial, 2-Dimensional Elastic Collisions Without Trigonometry, for the collision reactions. I am using Vector2 from the LIBGDX library to handle vectors. I am a bit confused on how to implement step 6 in Java from the tutorial. Below is my current code, please note that the code strictly follows the tutorial and there are redundant pieces of code which I plan to refactor later. Note: refrences to this refer to ball 1, and ball refers to ball 2. /* * Step 1 * * Find the Normal, Unit Normal and Unit Tangential vectors */ Vector2 n = new Vector2(this.position[0] - ball.position[0], this.position[1] - ball.position[1]); Vector2 un = n.normalize(); Vector2 ut = new Vector2(-un.y, un.x); /* * Step 2 * * Create the initial (before collision) velocity vectors */ Vector2 v1 = this.velocity; Vector2 v2 = ball.velocity; /* * Step 3 * * Resolve the velocity vectors into normal and tangential components */ float v1n = un.dot(v1); float v1t = ut.dot(v1); float v2n = un.dot(v2); float v2t = ut.dot(v2); /* * Step 4 * * Find the new tangential Velocities after collision */ float v1tPrime = v1t; float v2tPrime = v2t; /* * Step 5 * * Find the new normal velocities */ float v1nPrime = v1n * (this.mass - ball.mass) + (2 * ball.mass * v2n) / (this.mass + ball.mass); float v2nPrime = v2n * (ball.mass - this.mass) + (2 * this.mass * v1n) / (this.mass + ball.mass); /* * Step 6 * * Convert the scalar normal and tangential velocities into vectors??? */

  Read the article

• Tiny Wings - Placing items

  - by Federico

  I'm currently developing a Flash game like 'Tiny Wings'. I have a lot of work done, but i'm currently working on placing the items ( coins and obstacles ) on the terrain. My player it is moving on a auto-generated terrain (based on Emanuele Feronato's tutorials) so every time the player's x position is greater than (screenWidth + x) another hill is generated and so on. I'm currently having problems placing the items in a correct angle and put 5 or more items together on a hill. Could you please help me with this? Thanks, Regards. PS: This is the URL to the Emanuele Feronato post and the code to make the hills http://www.emanueleferonato.com/2011/10/04/create-a-terrain-like-the-one-in-tiny-wings-with-flash-and-box2d-%E2%80%93-adding-more-bumps/

  Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >