Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 596/985 | < Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >

• Diagnosing the problem when Canon printer fails to print under Ubuntu

  - by MMA

  I understand that the issue of Canon printer under Linux has a number of posts. Actually one of these, was started by me. After inputs from others I have successfully printed using Canon LBP6000 from my Ubuntu machine for around a year. If it failed to print, restarting the daemon using this homemade script coaxed the printer to print. #!/bin/bash pkill -9 -x ccpd pkill -9 -x captmoncnabc /etc/init.d/ccpd start /etc/init.d/ccpd status Recently, I am not successful any more, or successful on a limited and sporadic basis. Sometimes it prints when turned on after logging in, sometimes when the driver is reinstalled. I keep on trying the random steps (call abracadabras) until I get success. Again, not always success comes. I frustrate on for hours only to get single page printed. I loose precious time on the issue of printing. I have read and read all the documents available over the Internet. However, if you please notice, none of the guides, articles, tutorials (these are too many to list here) seem to be dealing with diagnosing the problem when it fails to print. They tell you where to find the drivers, how to install them, or which script to run to make the installation process automatic. Yes, some of the articles or comments suggest a step to try, without any systematic order. But these fail to suggest a step based on symptoms, mostly. This morning, my Canon LBP6000 failed to print. After sometime, there was a message for system error, details of which was found to be something like this. When I search for this error (c3pldrv crashed with SIGSEGV in write ()), I find a number of articles including this one. None of these are actually helpful. Mostly, these are 'me too', 'tell me if you find anything'. Running captstatusui -P LBP6000 produced this, Yes, the printer is connected and actually turned on. I believe that there a number of frustrated Canon printer users out there like me. But there is not a step by step definitive guide to systematically diagnose a non-printing printer. Do you think that you can provide your diagnosing inputs so that a systematic document can be built? May be we will want the Ubuntu users to stay away from Canon printers. But as I believe, as a Linux user for more than fifteen years, such a scenario is not acceptable any more. May be this was acceptable in the infancy days of Linux, but not today. I am using Ubuntu 12.04, by the way, I prefer LTS versions.

  Read the article

• Negative downtime, 200% uptime reported by uprecords/uptimed

  - by Psychoholic

  I'm curious as to how I could have negative downtime that keeps increasing, as well as uptime beyond 100%. I'm getting the below output from uprecords -adM: # Uptime | System Boot up ----------------------------+--------------------------------------------------- -> 1 14 days, 21:12:15 | Linux 3.2.0-29-generic Tue Aug 21 21:02:27 2012 2 14 days, 15:31:05 | Linux 3.2.0-29-generic Tue Aug 21 21:03:33 2012 ----------------------------+--------------------------------------------------- NewRec 0 days, 05:41:09 | since Wed Sep 5 12:33:32 2012 mst in 10 days, 02:40:18 | twenty-five days Sat Sep 15 21:02:26 2012 up 29 days, 12:43:20 | since Tue Aug 21 21:02:27 2012 down -14 days, -21:-11: | since Tue Aug 21 21:02:27 2012 %up 201.607 | since Tue Aug 21 21:02:27 2012 I installed uptimed sometime in the last week, have not rebooted, and just yesterday did I notice this odd behavior. I'm running Ubuntu 12.04.1, hosted in Hyper-V on Windows Server 2008 R2 64bit. Any insight would be appreciated.

  Read the article

• Grub bootloader goes fail to boot in dual boot system after installing Ubuntu 12.10

  - by K.K Patel

  I had 12.04 with my dual boot system. Yesterday I downloaded Ubuntu 12.10 make bootable USB and choose Upgrade option in Installer. After installation Grub failed to boot my machine. I tried following to fix grub bootloder . Same problem I fixed with Ubuntu 12.04 using live USB but this solution not work for Ubuntu 12.10. Now coming at exactly where this solution goes fail. I followed this steps after booting Live USB and opening terminal. 1) sudo fdisk -l to see where Linux is installed 2) sudo mount /dev/sda9 /mnt where sda9 is my linux partition 3) sudo mount /dev/sda9 /mnt/boot 4) sudo mount --bind /dev /mnt/dev 5) sudo chroot /mnt (No problems with this steps done perfectly) 6) grub-install /dev/sda when I type command I got error that source_dir doesn't exist Please specify --target or --directory How can I solve this ?

  Read the article

• Problem libc-so-6-version-glibc-2-14-not-found

  - by alessio

  i have installed nagios core 4 on ubuntu server 12.04 lts.. everything working fine,, but... i have a problem with remote command to a remote linux (ubuntu server 12.04) pc! when i try to check a service, for example: check_swap, check_disk etc.. i got everytime an error: Remote command execution failed: /home/nagios/plugins/check_disk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by /home/nagios/plugins/check_disk) the remote pc is not my pc and i don't want to make a disaster! :) So... how can i fix this problem? any help be appreciate!!! ;) thanks in advance! :)

  Read the article

• Looking for Windows shared web hosting with PHP support

  - by Ladislav Mrnka

  I'm looking for Windows based shared web hosting which supports multiple hosted web sites (multiple domains). Supported technologies should contain: ASP.NET 4, ASP.NET MVC IIS 7 MS SQL 2008 PHP, MySQL It is for my hobby projects so it should not be too expensive. I tried GoDaddy's Windows Deluxe hosting but the experience is very bad and I want to move elsewhere. WordPress hosted on GoDaddy's Windows hosting is unloaded every few minutes and next request takes around 20s to complete. Following request to empty site takes around 3s to complete. Even request for RSS wich transfers 1.2KB takes several seconds. The delay happens in PHP processing because static content is served within 200ms. It helped to migrate to Linux hosting (all requests are served under 1s) but Linux hosting is not what I'm looking for.

  Read the article

• Usb WiFi dongle pluggin in doesnt create wlan0 interface

  - by zuba

  I use D-Link DWA-110 WiFi usb dongle. It used to be working well, but after some config changes I broke something and now when I plug the dongle in I see it in lsusb output, but wlan0 isn't created and the led on the dongle doesn't light. What to check out? ~ > uname -a Linux Distress 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 17:31:43 UTC 2013 i686 i686 i386 GNU/Linux dmesg shows [ 667.824095] usb 1-8: new high-speed USB device number 6 using ehci-pci [ 668.117996] usb 1-8: New USB device found, idVendor=07d1, idProduct=3c07 [ 668.118007] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 668.118015] usb 1-8: Product: 802.11 bg WLAN [ 668.118021] usb 1-8: Manufacturer: Ralink

  Read the article

• IBus icon is missing at startup?

  - by quanta

  After some installing, tweaking, ... the IBus icon is missing at startup, although it's working fine: $ ps -ef | grep [i]bus quanta 1918 1890 0 09:54 ? 00:00:01 /usr/bin/ibus-daemon --xim quanta 1946 1918 0 09:54 ? 00:00:00 /usr/lib/i386-linux-gnu/ibus/ibus-gconf quanta 1948 1918 0 09:54 ? 00:00:00 /usr/bin/python /usr/share/ibus/ui/gtk/main.py quanta 1951 1 0 09:54 ? 00:00:00 /usr/lib/i386-linux-gnu/ibus/ibus-x11 --kill-daemon quanta 1987 1918 0 09:54 ? 00:00:00 /usr/lib/ibus-unikey/ibus-engine-unikey --ibus I can make it appear by restarting the ibus-daemon: $ ibus-daemon -x -r -d I also have tried to add the IBus to the System tray whitelist but nothing changes. How can I troubleshoot this issue?

  Read the article

• Can you install ubuntu on xp and then uninstall xp? how?

  - by Eli

  I have a problem with my pc, you can read about it here if you like http://yhoo.it/qIQyMw anyway, I might go for ubuntu, the thing is I'm in Lebanon and here few, very few people use linux, most of them never heard about ubuntu lol, therefore you'll be really lucky if you can buy an ubuntu cd or even if you find someone can find someone capable of installing it. So when they fix my pc, they might install xp coz they don't have a linux operating system, and i hate win 7 and vista so I'll have to download ubuntu and install it by myself, I don't want to dual boot coz i don't have a super computer lol, i have used ubuntu on my vps, never on desktop before so i would like to know if you can download ubuntu, install it, on a xp pro, then remove xp pro? is there any tutorial? thank you

  Read the article

• How can I make a permanently updated copy of a file in a different place to the original file?

  - by Mark

  I use two computers, a Linux one for coding and building and a Windows one which has the programming application to load the built program onto the hardware. Both computers have access to a network drive which I use to pass the files from Linux to Windows. My problem is, that every time I build I have to copy the files from where the are created to the network drive. How can I make some sort of file in the network drive on Ubuntu that always mirrors the file which is built in the different location, like a pointer? Thanks!

  Read the article

• Build a custom Ubuntu based distribution

  - by user51447

  I am working on making a custom Ubuntu 11.10 based distro.(64 bit) I am adding non open source packages, replacing packages, changed user interface from Unity to GNOME, and more changes. My system is ready, and I want to create a redistributable image for my distro. When you go to system settings - system info, you see a logo with the Ubuntu name and logo, but I want to change it to the name and logo of my distro. Also, in the boot menu, I want to change the boot entry names, and the GRUB background. And I want to change the name Ubuntu from every possible location. Also, I will be sharing it with people, so I want to make my own software repositories, like linux mint has, or any other distro has, I will purchase server space for that. Also, the I want to customize the wubi installer like linux mint did and if some uses the customized tool to install my distro from Windows, they should see the name of my distro in add or remove programs page. Any help will be appreciated!

  Read the article

• Building small Ubuntu server - What hardware is recommended?

  - by 10robinho

  There are many of us who need to build small Ubuntu server. Problem is that in some countries it is hard to find and quite expensive to buy server motherboards and processors. And when one is building small server with limited budget, buying some Xenons is not really an option. So, are there any general recommendations for hardware (I think that motherboards are the main issue) that is stable and fast under Linux? I read that Intel should be the best choice for cpu + mbo combo. So, I was looking around for some Intel motherboards + i7 Ivy Bridge (like Intel DZ77BH-55K with Z77 chipset and Intel i7 3770K) but I've read that they have some issues with kernel, booting and USB ports. That is why I ask community if you have any experience with this. Maybe Intel is not the best choice here? Maybe ASUS or Gigabyte or _other company_ are more stable with Linux? I hope that this Q&As can help people in building stable Ubuntu server.

  Read the article

• Error while upgrading

  - by arun

  When i have select to install updates from the update manager it says: Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux-image-3.0.0-13-generic_3.0.0-13.22_i386.deb Size mismatch I have tried several times and through terminal too but the size mismatch repeats itself there too. What is this size mismatch error ? Please Help ? tried sudo apt-get update and the sudo apt-get upgrade but the again error comes:: Failed to fetch http://us.archive.ubuntu.com/ubuntu/pool/main/x/xserver-xorg-video-intel/xserver-xorg-video-intel_2.15.901-1ubuntu2.1_i386.deb Size mismatch E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

  Read the article

• Java Oracle Installation /usr/bin/java: cannot execute binary file

  - by Dave

  Hi I've been trying for 1 day to get Oracle Java running on Ubuntu. I have a powermac g5 with Ubuntu 12.04 ppc64. uname -a : Linux LK37 3.2.0-53-powerpc64-smp #81-Ubuntu SMP Thu Aug 22 21:17:14 UTC 2013 ppc64 ppc64 ppc64 GNU/Linux lspci: david@LK37:~$ sudo lspc [sudo] password for david: sudo: lspc: command not found david@LK37:~$ sudo lspci 0000:00:0b.0 PCI bridge: Apple Inc. CPC945 PCIe Bridge 0000:0a:00.0 VGA compatible controller: NVIDIA Corporation NV43 [GeForce 6600 LE] (rev a2) 0001:00:00.0 Host bridge: Apple Inc. U4 HT Bridge 0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3) 0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3) 0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3) 0001:00:07.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:00:08.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:00:09.0 PCI bridge: Apple Inc. Shasta PCI Bridge 0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O 0001:01:0b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) 0001:01:0b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) 0001:01:0b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) 0001:03:0c.0 IDE interface: Broadcom K2 SATA 0001:03:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE 0001:03:0e.0 FireWire (IEEE 1394): Apple Inc. Shasta Firewire 0001:05:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) 0001:05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) david@LK37:~$ I tried various ways to install Oracle Java but I always end up with: bash: /usr/bin/java: cannot execute binary file At the moment I have Installed jdk-7u25-linux-x64.tar.gz in /usr/lib/jvm/jdk1.7.0/bin/ as said in this post I already tried the web install but I get a 404 error. I hope you can help me. I started using Ubuntu yesterday so please give me the complete terminal code, it will be a lot easier for me. For those who care I want to play Minecraft and with the OpenJDK I got a java.lang error. That's why I want to install Oracle Java.

  Read the article

• Ubuntu suddenly won't boot on a Mac

  - by emchristiansen

  I installed 11.10 in dual-boot mode following instructions here: https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation Everything worked fine, until I recently updated from Mac OS 10.6.x to the latest 10.6.x (this was a minor update prompted by OS X). The update made the rEFIt screen disappear, so I ran Boot Repair and reinstalled rEFIt and everything worked. I accidentally left my computer without power while booted into Ubuntu, until it presumably died or hibernated itself. I have been unable to boot into Ubuntu since. I didn't see the GRUB screen when I selected Linux the rEFIt chooser. Then I reinstalled rEFIt and the Linux option disappeared from the rEFIt chooser. This is a link to the boot info collected by Boot Repair: http://paste.ubuntu.com/755543/ Any help would be appreciated, especially an explanation of what all these components are (EFI, MBR, GPT, GRUB), where they live on disk, how the system knows to find each component, and how they relate to each other. Thanks!

  Read the article

• New Options for MySQL High Availability

  - by Mat Keep

  Data is the currency of today’s web, mobile, social, enterprise and cloud applications. Ensuring data is always available is a top priority for any organization – minutes of downtime will result in significant loss of revenue and reputation. There is not a “one size fits all” approach to delivering High Availability (HA). Unique application attributes, business requirements, operational capabilities and legacy infrastructure can all influence HA technology selection. And then technology is only one element in delivering HA – “People and Processes” are just as critical as the technology itself. For this reason, MySQL Enterprise Edition is available supporting a range of HA solutions, fully certified and supported by Oracle. MySQL Enterprise HA is not some expensive add-on, but included within the core Enterprise Edition offering, along with the management tools, consulting and 24x7 support needed to deliver true HA. At the recent MySQL Connect conference, we announced new HA options for MySQL users running on both Linux and Solaris: - DRBD for MySQL - Oracle Solaris Clustering for MySQL DRBD (Distributed Replicated Block Device) is an open source Linux kernel module which leverages synchronous replication to deliver high availability database applications across local storage. DRBD synchronizes database changes by mirroring data from an active node to a standby node and supports automatic failover and recovery. Linux, DRBD, Corosync and Pacemaker, provide an integrated stack of mature and proven open source technologies. DRBD Stack: Providing Synchronous Replication for the MySQL Database with InnoDB Download the DRBD for MySQL whitepaper to learn more, including step-by-step instructions to install, configure and provision DRBD with MySQL Oracle Solaris Cluster provides high availability and load balancing to mission-critical applications and services in physical or virtualized environments. With Oracle Solaris Cluster, organizations have a scalable and flexible solution that is suited equally to small clusters in local datacenters or larger multi-site, multi-cluster deployments that are part of enterprise disaster recovery implementations. The Oracle Solaris Cluster MySQL agent integrates seamlessly with MySQL offering a selection of configuration options in the various Oracle Solaris Cluster topologies. Putting it All Together When you add MySQL Replication and MySQL Cluster into the HA mix, along with 3rd party solutions, users have extensive choice (and decisions to make) to deliver HA services built on MySQL To make the decision process simpler, we have also published a new MySQL HA Solutions Guide. Exploring beyond just the technology, the guide presents a methodology to select the best HA solution for your new web, cloud and mobile services, while also discussing the importance of people and process in ensuring service continuity. This is subject recently presented at Oracle Open World, and the slides are available here. Whatever your uptime requirements, you can be sure MySQL has an HA solution for your needs Please don't hesitate to let us know of your HA requirements in the comments section of this blog. You can also contact MySQL consulting to learn more about their HA Jumpstart offering which will help you scope out your scaling and HA requirements.

  Read the article

• A Slice of Raspberry Pi

  - by Phil Factor

  Guest editorial for the ITPro/SysAdmin newsletter The Raspberry Pi Foundation has done a superb design job on their new $35 network-enabled Linux computer. This tiny machine, incorporating an ARM processor on a Broadcom BCM2835 multimedia chip, aims to put the fun back into learning computing. The public response has been overwhelmingly positive.Note that aim: "…to put the fun back". Education in Information Technology is in dire straits. It always has been, but seems to have deteriorated further still, even in the face of improved provision of equipment.In many countries, the government controls the curriculum. It predicted a shortage in office-based IT skills, and so geared the ICT curriculum toward mind-numbing training in word-processing and spreadsheet skills. Instead, the shortage has turned out to be in people with an engineering-mindset, who can solve problems with whatever technologies are available and learn new techniques quickly, in a rapidly-changing field.In retrospect, the assumption that specific training was required rather than an education was an idiotic response to the arrival of mainstream information technology. As a result, ICT became a disaster area, which discouraged a generation of youngsters from a career in IT, and thereby led directly to the shortage of people with the skills that are required to exploit the potential of Information Technology..Raspberry Pi aims to reverse the trend. This is a rig that is geared to fast graphics in high resolution. It is no toy. It should be a superb games machine. However, the use of Fedora, Debian, or Arch Linux ARM shows the more serious educational intent behind the Foundation's work. It looks like it will even do some office work too!So, get hold of any power supply that provides a 5VDC source at the required 700mA; an old Blackberry charger will do or, alternatively, it will run off four AA cells. You'll need a USB hub to support the mouse and keyboard, and maybe a hard drive. You'll want a DVI monitor (with audio out) or TV (sound and video). You'll also need to be able to cope with wired Ethernet 10/100, if you want networking.With this lot assembled, stick the paraphernalia on the back of the HDTV with Blu Tack, get a nice keyboard, and you have a classy Linux-based home computer. The major cost is in the T.V and the keyboard. If you're not already writing software for this platform, then maybe, at a time when some countries are talking of orders in the millions, you should consider it.

  Read the article

• La première beta de Ubuntu 10.04 LTS est sortie : nouveau design, nouveau kernel, nouveaux logiciels

  La beta 1 de Ubuntu 10.04 LTS est sortie Nouveau design, nouveau kernel, nouveaux logiciels Fini le marron dans Ubuntu. Le choc est rude, certes. Mais la première beta de la mouture 10.04 de l'OS consolera les nostalgique de l'ancien design de la distribution Linux (certainement) la plus connue au monde. Bien qu'il ne s'agisse que de la première beta, Lucid Lynx propose en effet déjà plusieurs nouveautés majeures. Sous le capot, on trouve par exemple le kernel 2.6.32 de Linux, Gnome 2.30 et une prise en charge améliorée des cartes graphiques NVIDIA. Coté logiciel, Ubuntu 10.04 propose notamment OpenOffice.org 3.2.0 (la suite bureautique de Su...

  Read the article

• How to stop programs on starting from returning to log in screen?

  - by Bruce McKean

  I'm not a computer nerd but have been able to fix Ubuntu/Linux problems in the pass two years with a Google search but this on has me stumped. I upgraded to 12.04 about thirty days ago and all was well except that every time I tried to load KeePassX it would go to the login screen. I installed KeePass2 and all seemed to work. Last week I tried to load Bibble5 (Raw photo editor) and it would try to load and then back to the login screen. After a few days I gave up and downloaded Corel After Shot Pro (Corel's now owns Bibble5) and it has the same problem. Could someone please head me into the steps I need to follow to find out what is the cause. I'm interested in learning more about the Linux system how to correct any future problems thanks in advance – Bruce -Computer- Processor : 8x Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz Memory : 8155MB (1092MB used) Operating System : Ubuntu 12.04 LTS OpenGL Renderer : GeForce GT 520/PCIe/SSE2

  Read the article

• Firefox zombie process problem

  - by user52987

  When I start Firefox a Firefox zombie process starts sometimes (not always) and then goes away after a few seconds (stays sometimes until firefox is closed). This problem occurs with four computers (2 laptops and 2 desktops running ubuntu 10.04, 11.10, precise beta 1 and beta 2) I also have this same problem with other distros like Fedora 16, Linux mint 12, Debian 6 and Arch Linux. Thunderbird is also affected by this zombie process problem. Firefox safe mode does NOT help! Can someone help me to fix this problem? If you are affected by this bug please click "this bug affects me" on launchpad. My bug report (screenshot included)

  Read the article

• Oracle OpenWorld 2012, Live From The Show Floor Videos

  - by Chris Kawalek

  At shows like Oracle OpenWorld, we like to catch up with the session speakers and other experts with short video clips that we post on our YouTube channel. For Oracle OpenWorld 2012, we put together this handy playlist of server and desktop virtualization related videos: We were also able to catch up with a few Oracle Linux partners at the Oracle Linux Pavillion. You can find those videos here: And if you'd like to look at the slides for any of our virtualization presentations or any other Oracle OpenWorld session, have a look at the Oracle OpenWorld 2012 content catalog. There's a lot of great information there!  -Chris

  Read the article

• Saving Big Money With Open Source Storage

  One company turned to iSCSI, OpenSolaris and Linux, commodity hardware and even solid state drives to control data storage costs.

  Read the article

• Why is my Ubuntu system not using the correct kernel?

  - by Brooks Moses

  We're having a bit of confusion on a Ubuntu remote system -- /boot/grub/menu.lst suggests the system should boot into kernel 2.6.35-30-generic, but it is actually running kernel 2.6.32-27-generic. Where should I look to start figuring out why this is happening and how to fix it? Specifically, /boot/grub/menu.lst has default 0 and the first entry is title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2- ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic Further, I've confirmed that /boot/vmlinuz-2.6.35-30-generic and /boot/initrd.img-2.6.35-30-generic exist and have appropriate permissions. Meanwhile, uname -a returns: $ uname -a Linux cuda2 2.6.32-27-generic #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010 x86_64 GNU/Linux Edit: I've also tried re-running update-grub, and rebooting; no luck. Here's the full menu.lst, as requested by a commenter: # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-legacy-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro ## default grub root device ## e.g. groot=(hd0,0) # groot=67717ee3-cbf9-45d2-ae97-820256f4c4fd ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 10.10, kernel 2.6.35-30-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.35-30-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.35-30-generic title Ubuntu 10.10, kernel 2.6.32-32-server uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-32-server (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-32-server root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-32-server title Ubuntu 10.10, kernel 2.6.32-27-generic uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro quiet splash initrd /boot/initrd.img-2.6.32-27-generic title Ubuntu 10.10, kernel 2.6.32-27-generic (recovery mode) uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/vmlinuz-2.6.32-27-generic root=UUID=67717ee3-cbf9-45d2-ae97-820256f4c4fd ro single initrd /boot/initrd.img-2.6.32-27-generic title Chainload into GRUB 2 root 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/grub/core.img title Ubuntu 10.10, memtest86+ uuid 67717ee3-cbf9-45d2-ae97-820256f4c4fd kernel /boot/memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST To add complication and joy to my life, this is a desktop machine in a remote datacenter; we don't have either local access or serial-console access. Suggestions?

  Read the article

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• How to Install Nvidia Drivers

  - by Richard Rodriguez

  I just ordered the Nvidia GTX 560 card, which should arrive tomorrow. I have a dilemma, though. Should I keep using the driver which is available in "additional drivers" in Ubuntu (10.10), or should I install the driver from the nvidia site? NOTE - The methods to install explained here apply to all Nvidia, Ati & Intel video cards The latest driver available at the nvidia site: LINUX X64 (AMD64/EM64T) DISPLAY DRIVER Version: 280.13 Certified Release Date: 2011.08.01 Operating System: Linux 64-bit Language: English (U.S.) File Size: 52.4 MB I should point out that I don't need the card to unleash its full potential in Ubuntu (I have Windows for gaming, other HDD), I just need it to work properly, that meaning the power saving should work (I don't want the card to overheat for no reason), also I would like the fans to work at proper speeds, etc. So which driver is the best for me?

  Read the article

• Beginners Tips To Learn Vim

  - by Nathan Campos

  I'm the type of developer that only uses GUI fully-featured programmer editor, when I'm at Windows I use Notepad++, at my Mac I use TextMate and at Linux I use GEdit, but now I'm starting to develop inside my Linux server, which doesn't have any window manager installed and I saw this as a beautiful time to learn how to use Vim, which I always had problems to understand, I can't even open a file to edit at Vim, so I want to know: Which is the best eBook for a very beginner on this editor to learn how to use it? I really loved Vim after I saw all the awesome things that you can do with it and this is the perfect moment to learn how to use it. PS: It would be a lot better if it has a Kindle or ePub version

  Read the article

< Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >