Search Results

Search found 33223 results on 1329 pages for 'database firewall'.

Page 597/1329 | < Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• Howto print from dumb terminals with local print server and remote hosted RDP

  - by Matt

  We have essentially a remote office with about 5 dumb terminals. The terminals are connecting to our office directly over a wireless link. What I want to do is connect all their printers onto a print server. But since the remote office is not actually allowed to see our LAN (since they are actually another company) we don't want a full on open VPN tunnel set up. Naturally the RDP traffic passes through a firewall. Is there an easy way to set up the RDP server so that it can see a print server on a remote LAN?

  Read the article

• Getting VSFTP running on Fedora 14

  - by Louis W

  Having troubles getting VSFTPD running on Fedora 14. Here is what I have done so far, please let me know if I am missing something. When I try to connect through FTP it says connection time out. Installed VSFTP with yum yum install vsftpd Edited config file vi /etc/vsftpd/vsftpd.conf Started service and made sure it would always start up service vsftpd start chkconfig vsftpd on Added and configured a new user /usr/sbin/useradd upload /usr/bin/passwd upload usermod -c "This user cannot login to a shell" -s /sbin/nologin upload Added firewall rules iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A OUTPUT -p tcp --sport 20 -j ACCEPT service iptables save service iptables restart Checked netstat (In reply to comment below) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 23752/vsftpd

  Read the article

• can't configure openfire

  - by SnOrfus

  I'm trying to setup openfire on one of the servers here and I've gone through the windows installer, installed the service, started the service and I can't connect to the admin console. If I go to http://127.0.0.1:9090 (or http://127.0.0.1/index.html) all I get is a blank page. I also tried running the GUI instead of the service, and it said that it was listening on 127.0.0.1:9090 and when I navigate there or click "launch admin" I still get a blank page. What could be the problem? It's a windows server 2k3 machine with IIS running (runs a couple of other sites). edit openfire 3.6.4 I installed on my local machine without problems, so it's obviously something on the server that's causing it. There is no firewall installed on that server so I'm not sure what would be stopping it.

  Read the article

• webserver running as nobody cannot resolve domain names

  - by jalal

  if i try to run the following: <?php echo file_get_contents("http://www.yahoo.com/index.html"); ?> through the web server I get a an "php_network_getaddresses: getaddrinfo" error. If I run the same file from the shell with: php test.php then I get the expected file output. This indicates to me that the 'nobody' user, which the webserver runs as, is not able to resolve the domain name, but the shell user can. Any ideas on how to fix this? Further info: CentOS 6, cPanel install, Apache, PHP running as dso. BTW, I've tried disabling the firewall to no effect.

  Read the article

• php mail not arrives at gmail, not at local server

  - by thomas

  The php mail function I am using does not work completely. It will sent mails to gmail easy enough. However, emails routed directly to my internally hosted exchange server are not getting through. The servers/domains are setup is as follows. URLs are registered with Network solutions (www.independentsservice.com & www.isco.net) NS directs all traffic to our ISP (Socket.net). Socket directs as follows: Mail to our local server FTP to our local server HTTP to our website hosted on Chihost.com Traffic to our local server goes through a Watchguard firewall which routes mail traffic to our locally hosted Exchange server. Is there some reason why exchange won't accept these emails? Thanks!

  Read the article

• SQL Server 2008 data directiories in SSD

  - by Kuroro

  I am going to install a new SQL server 2008 instance on my development/testing machine. My machine have one 7200rpm 500GB SATA Disk (C:OS) and one Intel X25-G2 80GB SSD(D:). Details machine config is as follow: CPU:i7 860 RAM:8GB Microsoft said I have an option to place following directories in different disk. So I plan to place User database & Temp DB on SSD and rest of it on traditional disk. Is it a good choice for gaining a performance boost in fast SSD? Data root directory :C:\Program Files\Microsoft SQL Server User database directory D:\Data User log directory C:\Logs Temp DB directory D:\TempDB Temp Log directory C:\TempDB Backup directory C:\Backups

  Read the article

• Reducing latency for different geographic regions on Amazon Cloud

  - by Shoaibi

  I have got an application which has three components Application code : Amazon EC2 US-EAST-1 instance Application images, and other static data : Amazon S3 with CloudFront Application Database : Amazon RDS In short i need something like Cloud Front for EC2. In long, people using this application from a different region say middle east will have faster static content downloading due to Cloud Front but there would be a lot of latency in communicating to EC2 instance. I want to use a budget friendly way of enhancing this. Launching Amazon Instances in every region that offer is sure a choice, but isn't really cheap, so would try to avoid it unless its last resort. Also say if my clients also need to communicate to the RDS database directly, is there some kind of solution which gives that kind of functionality mentioned above, but for RDS?

  Read the article

• How to build a small network/server at home, basics

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial. I'm trying to get the hands on experience so my question is.... I want to build a small network in my home, wireless and also wired; printer, laptop, desktop, server (I have 4 1TB external drives of movies/music I want to be available to all computers) Where would I start from building a server with my hard drives, good modem, router, switch port, firewall internet speed/connection etc. This is my first project I want to try.

  Read the article

• How to forward external port to internal port using plink

  - by user857990

  For a penetration test where I have shell access to a computer running an old Windows, I'd like to forward port 4450 to 127.0.0.1:445 because the firewall is blocking 445 externally. I'm stuck on the following: plink -L 4450:127.0.0.1:445 SSH-Server According to the documentation I've found, I'd have to specify a SSH-Server. But all documentation I've found just uses an SSH-Server in the same network. To forward it to a localhost port, that wouldn't help. Do I have to install an SSH-Server on that machine or are there other ways?

  Read the article

• Can't ping some IP addresses in the same subnet (LAN) Windows 2011 Server

  - by Ricardo

  Hi I’m running in Windows Small Server 2011 server standard (192.168.1.108), it’s my dhcp and dns server too, but suddenly all other users can’t get internet. My gateway is 192.168.1.1. After a lots of tested I can saw that my server can’t get into the router (192.168.1.1), and also into some others computers, but some other computers answer the ping command. In fact the same computer with the IP 192.168.1.9 didn't answer, but with the IP 192.168.1.63, it response! I have no routers, firewall, vlans or anything that disallow the traffic between computers, in fact when I changed the server IP address (192.168.1.109), I be able to ping the other computers and gateway, but if a back to the 192.168.1.108 the trouble comeback. I hope you can help me with this issue Ricardo

  Read the article

• Remote connection to SQL server doesn't use the instance name

  - by Max

  I have a web server with SQL express 2008 installed. I was trying to connect to this from my local machine using SSMS. After enabling TCP/IP in SQL configuration manager, starting SQL browser service and opening up the firewall I still couldn't connect using xxx.xxx.xxx.xxx\sqlexpress as the server name. Finally out of frustration I tried to connect taking off the sqlexpress instance name to just xxx.xxx.xxx.xxx and it worked! I'm really at a loss here as to why this works. What would happen if I installed more instances of SQL?

  Read the article

• Manage song metadata on CentOS from command line

  - by Puddingfox

  I am making a simple Pandora.com alternative for myself and a few friends where the user can upload his/her songs and listen to them anywhere. My intent is to make a lightweight, simple player in HTML5 so all the user needs is a current Firefox or Chrome to use it. I have set it up so that all uploaded songs get converted to .ogg and added to a database but I also want some metadata (not sure if that is the correct term) for the songs to be stored in the database so the player can tell the user what song he/she is listening too. I know there are several GUI tools for managing the title/artist/album info for songs but I'm having trouble finding any good ones I can use from the command line. If the song has the information already in the file, I think I can use mplayer to retrieve the information but it would be really great if there was one that would look up the song information online. I don't mind interfacing with an API (would be pretty interesting actually). Do you guys have any suggestions?

  Read the article

• XDMCP works for Solaris, not for RHEL

  - by joshxdr

  I have some old RHEL4 servers that until recently I was able to connect to remotely with Exceed (remote desktop using XDMCP) from my windowsXP PC. My PC is connected to our network by wired LAN. Recently it seems something has changed in our network. I can still connect to all the old Solaris and HPUX servers with Exceed, but for some reason I can no longer connect to the RHEL4 servers. I assume this is some kind of "security" feature turned on in our network. Does anyone know what this might be, and how I can tell IT to re-enable it? Update: A colleague has found that he can connect (very slowly) to these RHEL4 boxes with XDMCP if he is using our VPN from home, but when he is in the office using wired LAN he cannot connect to them. So it seems that there is some kind of firewall or ???, part of our wired LAN network, that is blocking XDMCP traffic from RHEL4.

  Read the article

• Squid closing the connection on long HTTP GET requests

  - by Rhys

  Hello, When running a database query on a specific external site we use, Squid seems to cut off the connection after a consistent period of time (just over a minute). The query is submitted through a standard web form is that uses GET to query their database. Firefox 3 just displays a blank page. Internet Explorer throws a 'Page Cannot Be Displayed' error (tested in v6 and v8). When we perform the same query on the same machine, but bypass the Squid proxy, it works fine. The query takes about two and a half minutes to complete. There are a few timeout settings in Squid, but I honestly don't know what one to be looking at. Any possible solutions would be much appreciated. Cheers

  Read the article

• MSSQL:Ultimate configuration for rebuilding indexes+statistics

  - by Niels Bosma

  My database is growing slower even though I have a bunch of indexes setup. Yesterday I figured out that I need to setup a maintenance plan to build the indexes etc. So my question is what's the ultimate configuration for this? Do I need All: "Rebuild idex task", "Reorganize index task" and "update statistics task". Anything else I need to setup. Shrink database? (Today, the only maintenance plans I have is backup) Does it matter in what order I run them? Any configuration options I should be aware of? I've read of problems with log growing wild, how do I fix that? My transaction log is quite small and is usually a problem for me. -

  Read the article

• Windows Server 2008 Active Directory DNS setup

  - by Mister IT Guru

  I have to setup a small windows network inside my bigger linux/mac infrastructure. In order to get the windows clients logging onto the domain, I have had to make the DC their primary DNS server, which seems to have worked. I would much prefer to have one DNS server running on my network, or at least one authoritative server running on the network. I have a USG 200 router/firewall and I can configure some static records for DNS, but I an not sure what I need to put in order to get DNS and AD working together, and hints and tips appreciated.

  Read the article

• Windows Server 2003 R2 sp2 and Exchange 2003 - missing pop-up menu "Exchange Tasks"

  - by Denis

  I need to recover database. That's what i doing step-by-step: - In Exchange System Manager check the server - Create new Recovery Storage Group - Add Database to recover - Mount store for it Database (Mailbox Store) - all finish successful Next step - I need check user and in pop-up menu click on "Exchange Tasks...", but in menu i see only "Help". Main question - why I have not "Exchange Tasks" and how I can get it? But I can see "Exchange Tasks" in "First storage Group"-Mailbox-User. Sorry for my bad English. Thanks, Denis

  Read the article

• Not able to save Global navigation - SharePoint 2007

  - by Ryan

  I have migrated my sitecollection(migsitecollection) to different farm using content deployment job. http://vsmoss/sites/migsitecollection I used collaboration portal to create it.Its working fine from where I migrated it but after running content deployment jobs my new migrated site global navigation settings are not getting saved when I am trying ot change them by going in settings-Navigation and in logs I can see this error The SPNavigation store is likely corrupt. I saw on net the solution for this problem is changing onet.xml and running script on sql database for the site, I am eager to better answer than this but if its the same I have few doubts on it: First,As my site template is not customised its the collobartion portal so I am not sure where exactly to change the onet.xml. Second, I am using the same database as of my webapplication running that script would not affect anything else on the main site of mine?

  Read the article

• CentOS 6.5 as WebServer for Django Dev

  - by Charlesliam

  During CentOS 6.5 Installation I choose WebServer type for this computer. The server has a static IP address 192.168.111.100. The CentOS was updated I managed to install virtualenv with Python 2.7. Within the virtualenv, I'll be using Django Framework. After I tried to run the command using root user python manage.py runserver 0.0.0.0:8000 I can't see the website from other computer within the LAN when I try to type 192.168.111.100:8000/admin on my browser. I already disable firewall using service iptables stop I can ping the 192.168.111.100 and I have a good feedback with nslookup. What seems the problem of my config?

  Read the article

• Can't telnet to SQL Server

  - by Thiago

  Hi there, I have an SQL Server running on a computer, and I'm trying to access it from another computer in the same local network (potentially VPN, since it's located in a datacenter). The point is that I can't even telnet to the port in which SQL Server is listening. And yes, SQL Server is working, since I can telnet to it from my workstation. I think it's something in the host, since there's no hop between the two computers, but I don't know how to troubleshoot this. Basically I get a connection failed, when I try to telnet. What can cause such problem, since apparently there's no firewall and the server is accepting connections from other computers? Thanks in advance

  Read the article

• How to config mysql-server for heavy load

  - by Rasmus

  Im in the process of setting up a new database server. I have been running a few mysql database servers before and it has been working okay. But i would like to hear the recommended setup for my server. For example, what should i set the max connection, query_cache_size, table_cache and so on. I have arround 4-600 per second: Open tables: 112 Queries per second avg: 430.386. The server i am setting it up on have the following configuration: Linux version 2.6.32-5-amd64 (Debian 2.6.32-41squeeze2) 2x Intel Xeon X3440 @ 2.53GHz 4GB Ram /, /boot, /tmp etc on Software RAID1, 2x 7200RPM SATA Data location on Software RAID0, 2x7200RPM SATA Im am going to place the mysql databases on the RAID0. Am im missing anything? Let me know! Thanks in advance, im looking forward to hearing from you :-) /Rasmus

  Read the article

• How can I view my IIS hosted sites on other machines on my network

  - by Truegilly

  Hello, at home i have a simple network setup conatining 2 machines and 1 belkin router. On one machine i have a site hosted with IIS7. Rather than the standard localhost/index.htm address i have added an entry in the HOSTS file pointing the local ip (127.0.0.1) to this domain - www.mysite.dev. i can access the site with www.mysite.dev with no problem. what i would like to do is be able to view this site from my other machine on the network. initially i assumed this could be done with a url like so MACHINE-NAME/www.mysite.dev, but the connection always times out. But I can ping MACHINE-NAME without problems. For testing purposes i have diabled the windows firewall on both machines but to no joy. Like a typical web developer, my techy/network skills are pretty poor. Can anyone see where im going wrong ?? thank you for your time Truegilly :)

  Read the article

• Proxmox 31 + KVM routing + IP subnet + csf

  - by KeyJey

  We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

  Read the article

• How to install Oracle's exp / imp binaries

  - by Sotapanna

  I was browsing the net to find a solution, but I had no luck. :( How can I install Oracle's imp / exp binaries to my CentOS box without installing an Oracle Server? I'm accessing an existing Oracle database on another machine, so I only need a client here. I already installed sqlplus and its dependencies (oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64.rpm, and oracle-instantclient11.2-odbc-11.2.0.3.0-1.x86_64.rpm), but that didn't provide those tools. Do I really need to fully install Oracle? My aim is to suck a database dump from the Oracle to my CentOS box. If there is another way to do this without using exp I wouldn't feel bad about NOT using it, but it seems to me there is no alternative.

  Read the article

< Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >