Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 599/778 | < Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >

• Why can't all zeros in the host portion of IP address be used for a host?

  - by Grezzo

  I know that if I have a network 83.23.159.0/24 then I have 254 usable host IP addresses because: 83.23.159.0 (in binary: host portion all zeros) is the subnet address 83.23.159.1-254 are host addresses 83.23.159.255 (in binary: host portion all ones) is the broadcast address I understand the use for a broadcast address, but I don't understand what the subnet address is ever used for. I can't see any reason that an IP packet's destination address would be set to the subnet address, so why does the subnet itself need an address if it is never going to be the endpoint for AN IP flow? To me it seems like a waste to not allow this address to be used as a host address. To summarise, my questions are: Is an IP packet's destination ever set to the subnet IP address? If yes, in what cases and why? If no, then why not free up that address for any host to use?

  Read the article

• How do I split an internet connection into 4 equal connections?

  - by luis velasco

  My 4 roomates and I have a problem: One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split a 16MB connection into a separated 4 x 4 mb (theoretically)..

  Read the article

• Logs being flooded from Squid for having intercepted and authentication enabled together

  - by Horace

  I have done some hefty Google'ing and I can't seem to find a single solution to this issue that I cam currently experiencing. Here is a sample configuration from squid that I have: # # DIGEST Auth # auth_param digest program /usr/sbin/digest_file_auth /etc/squid/digpass auth_param digest children 8 auth_param digest realm LHPROJECTS.LAN Network Proxy auth_param digest nonce_garbage_interval 10 minutes auth_param digest nonce_max_duration 45 minutes auth_param digest nonce_max_count 100 auth_param digest nonce_strictness on # Squid normally listens to port 3128 # Squid normally listens to port 3128 http_port 192.168.10.2:3128 transparent https_port 192.168.10.2:3128 intercept http_port 192.168.10.2:3130 As noted above, I have three ports defined, 2 of them are transparent/intercept and one is a regular http port (which I use for authentication). Which works rather well in this configuration however my logs are getting flooded of this entry authentication not applicable on intercepted requests whenever a transparent connection is made. So far, I can't seem to find any documentation that would describe how to suppress these messages ?

  Read the article

• Esxi with iSCSI SAN slows down with many multiple VMs running

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas). Those two machines are connected to each other with Gigabit ethernet, and a procurve switch in between. After a while, if I have many(4-5 or more) vms running, they start to get un-responsive (long delays before anything happens). We are trying to find the reason behind this. Today we looked at esxtop, and found that DAVG of that iSCSI LUN stays at 70-80. I read that +30 is critical! What could be causing those high response-times?

  Read the article

• What is the breakdown of jobs in game development?

  - by Destry Ullrich

  There's a project I'm trying to start for Indie Game Development; specifically, it's going to be a social networking website that lets developers meet through (It's a secret). One of the key components is showing what skills members have. Question: I need to know what MAJOR game development roles are not represented in the following list, keeping in mind that many specialist roles are being condensed into more broad, generalist roles: Art Animator (Characters, creatures, props, etc.) Concept Artist (2D scenes, environments, props, silhouettes, etc.) Technical Artist (UI artists, typefaces, graphic designers, etc.) 3D Artist (Modeling, rigging, texture, lighting, etc.) Audio Composer (Scores, music, etc.) Sound Engineer (SFX, mood setting, audio implementation, etc.) Voice (Dialog, acting, etc.) Design Creative Director (Initial direction, team management, communications, etc.) Gameplay Designer (Systems, mechanics, control mapping, etc.) World Designer (Level design, aesthetics, game progression, events, etc.) Writer (Story, mythos, dialog, flavor text, etc.) Programming Engine Programming (Engine creation, scripting, physics, etc.) Graphics Engineer (Sprites, lighting, GUI, etc.) Network Engineer (LAN, multiplayer, server support, etc.) Technical Director (I don't know what a technical director would even do.) Post Script: I have an art background, so i'm not familiar with what the others behind game creation actually do. What's missing from this list, and if you feel some things should be changed around how so?

  Read the article

• vmware player - ubuntu can resolve hostname but ping fails

  - by recursive_acronym

  Using VMware players on Windows 7 with a Ubuntu 10.04 guest. When I ping it resolves the ip address but the ping fails. Hopefully this is a local issue as I don't have access to any of the network equipment (routers, etc). vmware tools is installed. Is there any other information I can provide to help resolve this? eth0 Link encap:Ethernet HWaddr 00:0c:29:83:4f:c0 inet addr:192.168.163.129 Bcast:192.168.163.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:4fc0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:50006 (50.0 KB) TX bytes:16701 (16.7 KB) Interrupt:19 Base address:0x2024 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

  Read the article

• Samba / smbd on Centos 6.5

  - by Satalink

  I've installed Samba4 and have the smb.conf file as follows: [global] workgroup = WORKGROUP server string = Samba Server realm = REXIALO.COM netbios name = REXIALO.COM security = user map to guest = Bad Password bind interfaces only = no interfaces = lo venet0 log file = /var/log/samba/samba.log max log size = 1000 [webroot] path = /usr/local/apache/htdocs comment = Example.com webroot directory read only = No I can connect from the same server with smbclient. Localhost: # smbclient -L localhost -U root Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- -------Enter root's password: network: # smbclient -L rexialo.com -U Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- ------- The problem is when I try to map to the smb webroot from Windows 7, it asks for user/pass but just times out and then prompts for credentials. The samba.log file does not show any activity other than the startup of the smbd process. Any help would be appreciated.

  Read the article

• Best Practices in Preventing Locks in File sharing in Windows?

  - by crosenblum

  We have a web development server, that has our source control on it. That we use via mapped drives to open/edit/save/create files on to it. But I have noticed a lot of weird glitches with either the file lock/sharing/etc For example, if i have a file open on my local pc, and try to check out that file via my source control on dev, it error's out. The source control I use is QCVS by Qumasoft. Or If I use cuteftp to download something to dev, via my local pc, it won't download unless I close that file. So my brain sniff's and figures this is either an issue with folder/network/sharing, or an issue of permissions. Has anyone else had similar issues, and what did they do to fix it permanently? Thank you...

  Read the article

• How to have internet connection over VPN while "Microsoft Firewall Client for ISA server" is running

  - by blocked

  I have the software mentioned in the title running on my machine. When I connect over VPN to my company's network, my internet connection gets borked, because somehow the ISA firewall blocks it. This is completely idiotic, because my work involves extensive use of the internet, so having to disconnect and reconnect continuously seriously cripples my productivity. (Meaning: I'm tearing my hair out here.) Can I have my VPN connection and somehow still have my internet connection too? I'm open to any solution.

  Read the article

• Which firewall ports do I need to open in order for a domain trust to work?

  - by Massimo

  I have two Active Directory domains in two different forests; each domain has two DCs (all of them Windows Server 2008 R2). The domains are also in different networks, with a firewall connecting them. I need to create a two-way forest trust between the two domains and forest. How do I configure the firewall to allow this? I found this article, but it doesn't explain very clearly which traffic is required between DCs, and which traffic (if any) in needed instead between domain computers in one domain and DCs for the other one. I'm allowed to permit all traffic between the DCs, but allowing computers in one network to access DCs in the other one would be a little more difficult.

  Read the article

• Using DNS entries to determine location

  - by Raphink

  I'm trying to think of a clean way to determine the location of machines (mainly, which datacenter they belong to) based on their network settings. I would like it to be dynamic, and I'm thinking of using special DNS records that would be specific to the DNS server in each datacenter. For example, you could have: root@machine1# dig TXT mysite ... mysite 3600 IN TXT "DC1" ... root@machine2# dig TXT mysite ... mysite 3600 IN TXT "DC2" ... etc. I know that DNS has a special LOC record for location, but it takes coordinates, so it doesn't help in my case. Is there a standard way of addressing this issue, another special type of record for it, or some standard entries in TXT records?

  Read the article

• How *NAT* was Implemented in Home Based Routers ? [closed]

  - by Sumit Arora

  Different Types of Home-Based Routers Exist, and those routers provide NAT Feature as well e.g; and most of them are Port Restricted. Q-1 : What kind of Base Softwares Manufactures use to develop NAT Functionality ? Q-2 : Is that Technology Proprietary ? Or some Open-Source used to develop that e.g; Firehol ? Q-3 : I am looking for a software which works exactly like a NAT,and by doing very basic configuration it should work either Symmetric NAT, Port Restricted NAT or Address Restricted NAT ? So that I can test some of my Network Application which are dependent on NAT via this way on same PC ? e.g; I can test my developed ICE Algorithms

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• Lots of files being used by blank web page. What are they?

  - by byronyasgur

  I am trying to optimise a website and I was using the network waterfall facility in Google Chrome. When I looked at the results there were lots of files which I didnt recognise. I first thought they might be something to do with Google Chrome itself, so I put a blank HTML file on my desktop and checked but there was nothing in the waterfall except the file itself. So I put a blank file on my server and I got the output below. What are all these files, are they all necessary, is this normal and do I need to be in any way concerned. My hosting provider has always been excellent in every regard that I'm aware of. My host is shared hosting, using cpanel and is based on a LAMP server. I also note that a couple of those file have problems but I have no idea how to fault find that or whether it's a concern. EDIT: I have cleared the cache so I don't think it's a browser cache issue.

  Read the article

• Is SSL to the proxy good enough?

  - by Josh Smeaton

  We are currently trying to decide on how best to do SSL traffic in our environment. We have an externally facing Apache proxy server that is responsible for directing all traffic into our environment. It is also doing the SSL work for the majority of our servers. There are one or two IIS servers in particular that are doing their own SSL, but they are also behind the proxy. I'm wondering, is SSL to the proxy good enough? It would mean that traffic within our network is identifiable, but is that such a big deal?

  Read the article

• Only ONE Outlook 2010 installation "Cannot connect to Exchange server" when setting up new profile.

  - by Johnny PDEX

  Exchange 2010, one-server installation (small production, I know not best practice) OWA Connectivity has been confirmed, Autodiscover is configured and working properly for EVERY other installation. Other user accounts tested on problem Outlook, none can connect. Windows Firewall is pre-configured by Group Policy, only modifications being related to remote management. Firewall has also been disabled during diagnostic period. Network discovery and file sharing is enabled on workstation as well. Windows 7 Professional, latest updates installed. Driving me nuts. Help, serverfault?

  Read the article

• How do I restore the default applets to Gnome's notification area?

  - by gbacon

  I have a fresh install of Karmic Koala. In a botched attempt at trying to change my default window manager, I somehow removed at least three applets from the notification area: network manager (nm-applet), volume control (gnome-volume-control-applet), and the battery meter (???). Now if I logout and back in, these applets don't run, but I can start them from the command line. Because it's a fresh install, I completely removed my luser account and home directory. After recreating my account, I was frustrated to find that the applets are still missing and no obvious way to add them back. How can I restore the default configuration?

  Read the article

• HAProxy and Intermediate SSL Certificate Issue

  - by Sam K

  We are currently experiencing an issue with verifying a Comodo SSL certificate on an Ubuntu AWS cluster. Browsers are displaying the site/content fine and showing all the relevant certificate information (at least, all the ones we've checked), but certain network proxies and the online SSL checkers are showing we have an incomplete chain. We have tried the following to try to resolve this: Upgraded haproxy to the latest 1.5.3 Created a concatenated ".pem" file containing all the certificate (site, intermediate, w/ and w/out root) Added an explicit "ca-file" attribute to the "bind" line in our haproxy.cfg file. The ".pem" file verifies OK using openssl. The various intermediate and root certificates are installed and showing in /etc/ssl/certs. But the checks still come back with an incomplete chain. Can anyone advise about anything else we can check or any other changes we can make to try to fix this? Many thanks in advance... UPDATE: The only relevant line from the haproxy.cfg (I believe), is this one: bind *:443 ssl crt /etc/ssl/domainaname.com.pem

  Read the article

• Is it possible to get a google voice number without already having a phone number?

  - by boost

  I'm sorry if this is the wrong place to post this, but I couldn't find a more suitable website in the stackexchange network. I currently have no phone number; I can make outgoing calls via the widget in gmail, but I cannot receive calls (as far as I know). I know that you can set up a google voice number to forward to google chat, and this is exactly what I want. The problem is, I can't get a google voice number in the first place, because it first requires that I have an existing phone number, even if I wouldn't use it. So, it is possible to skip providing an existing phone number, and just get a google voice number that forwards to google chat? Alternatively, is there any free phone service that can be used without a phone and lets you receive calls from any number? I realize I'm kind of asking for free candy, but, if it's out there, I'd be a fool

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• What are my X client options for MS Windows?

  - by Nick Bolton

  I need to connect to a headless X Windows server (running on Ubuntu) from my MS Windows 7 computer over a 100 Mbit network. I could use VNC (or any other remote viewer) but the 3D graphics performance would be lousy I imagine. I used to have it hooked up to a monitor, but that's broken now and I can't afford a new one. A friend advised that I could try and use an X client, and that the 3D graphics wont suffer too much over 100 Mbit. Cygwin seems to be an option, but I was wondering if there were any more lightweight options.

  Read the article

• What is involved with writing a lobby server?

  - by Kira

  So I'm writing a Chess matchmaking system based on a Lobby view with gaming rooms, general chat etc. So far I have a working prototype but I have big doubts regarding some things I did with the server. Writing a gaming lobby server is a new programming experience to me and so I don't have a clear nor precise programming model for it. I also couldn't find a paper that describes how it should work. I ordered "Java Network Programming 3rd edition" from Amazon and still waiting for shipment, hopefully I'll find some useful examples/information in this book. Meanwhile, I'd like to gather your opinions and see how you would handle some things so I can learn how to write a server correctly. Here are a few questions off the top of my head: (may be more will come) First, let's define what a server does. It's primary functionality is to hold TCP connections with clients, listen to the events they generate and dispatch them to the other players. But is there more to it than that? Should I use one thread per client? If so, 300 clients = 300 threads. Isn't that too much? What hardware is needed to support that? And how much bandwidth does a lobby consume then approx? What kind of data structure should be used to hold the clients' sockets? How do you protect it from concurrent modification (eg. a player enters or exists the lobby) when iterating through it to dispatch an event without hurting throughput? Is ConcurrentHashMap the correct answer here, or are there some techniques I should know? When a user enters the lobby, what mechanism would you use to transfer the state of the lobby to him? And while this is happening, where do the other events bubble up? Screenshot : http://imageshack.us/photo/my-images/695/sansrewyh.png/

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, I am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now I get this error when I try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do I need to change in order my win xp join the domain

  Read the article

• ServerName no longer works as SQL Server 2008 Default instance name?

  - by TomK

  Folks, Somehow in struggling to install something (Sage MIP), I have unsettled my system's SQL Server 2008 instance names. If I fired up SSMS and connected to "MySystemName" (while logged into MySystemName), I used to immediately connect and could view my databases. Now if I connect to "(local)" or "." I connect just fine...but "MySystemName" gives me a timeout error. If I log in with "." and do "SELECT @@SERVERNAME" it comes back with "MySystemName" just fine. I've double checked that my network name is in the Security\Logins list, and it is, as a dbadmin. Any suggestions? I thought that having SQL Server 2005 Express might be a problem (the "battle of the default instances"), so I uninstalled that. No better.

  Read the article

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

< Previous Page | 595 596 597 598 599 600 601 602 603 604 605 606  | Next Page >