Search Results

Search found 336 results on 14 pages for 'seagate'.

Page 6/14 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Sony Vaio Hard Drive replacement won't boot

  - by AJ Bovaird

  I'm working on a Sony Vaio VGN-CR120e. I've cloned the original SATA 1.5 drive with Norton Ghost on to 2 new hard drives, the second of which is a Seagate 7200.4 320Gb 7200 RPM, with the jumper set to limit to SATA 1.5. (The first drive is a WD Scorpio Black 320Gb 7200RMP, which has no SATA 1.5 override support). Neither of the cloned drives will boot - I immediately get a BlackSOD saying: "Windows failed to start blah blah blah" "File \Windows\system32\winload.exe" "Status: 0xc000000e" "Info: The selected entry could not be loaded because the application is missing or corrupt." I've done this hundreds of times on other PC's, and this is the first time I've encountered such an error. Does anyone have any suggestions or advice on how to proceeed, as I would rather not reinstall Vista unless absolutely necessary.

  Read the article

• SATA 300 mobo and drives but only connected at SATA 150

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

  Read the article

• How do I get Windows 7 To Recognize a newly installed RAID 5 volume?

  - by GregH

  I had a previously running Windows 7 (64 bit) system. I added 3 new 1TB Seagate drives that I set up as a RAID 5 volume. I have a Gigabyte GA-P55M-UD2 motherboard. I installed the drives, set up the BIOS and configured the three drives as a RAID volume through the RAID setup utility that was accessed via Ctrl-I while the system was booting. I rebooted the system and could see the drives during the boot sequence. However, when Windows 7 was starting I got an error (quick blue screen) and then Windows tried to repair itself with no success. Do I need to install RAID drivers in Windows? How do I do it if Windows won't boot? Thanks in advance.

  Read the article

• What cloud backup solution supports a "backup server to cloud" configuration?

  - by Gepeto

  What online backup tool allows you to: A) Back up Windows, Linux and optionally Mac desktops and servers to the cloud B) Do so by first backing up to a central server or appliance C) Allow restoring from that appliance when possible and if not go to the cloud For now the best option I have seen is i365 by seagate with an appliance between the local computers and the cloud. I know Microsoft also has an i365 plugin for DPM, as well as an Iron Mountain plugin. However, I feel that there must be a simpler way to do this. Can any of the "simpler" solutions like Jungle Disk or anything else going to s3, Mozy, Carbonite, Crashplan, etc do this? Thank you

  Read the article

• IDE <-> SATA Adapter Issue - Hard Drive Not recognized

  - by nicorellius

  I was trying to use one of these IDE to SATA adapters (Syba SD-ADA50016 IDE/SATA Converter Bi-directional IDE to SATA) and I connected a working hard drive (Seagate Barracuda 500 GB SATA 3.5 Inch 7200 RPM Version 12 Desktop Internal Hard Drive ST3500418AS). I could get the drive to be recognized by the BIOS, but I couldn't boot a Linux disc or install to the drive. I tried to install pfSense to this drive and the install failed because the setup couldn't recognize the file. Has anyone heard of these adapters giving trouble and/or not working properly? I would like to be able to use this device for newer drives on older boards.

  Read the article

• AMD Phenom 2 is idling at 50°C, can I get it cooler?

  - by liam

  Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

  Read the article

• Is 850W SMPS enough for the below Config?

  - by bali208

  We are planing to assemble a file server of the following configuration. 1) Intel S2400SC2 Motherboard. 2) Xeon 2407 Processor x 2 (Dual Processors) 3) 8gb x 8 ECC DDR3 RAM 4) One 2 TB Seagate HDD. 5) 8 cabinet fans fitted for NZXT Switch 810 Cabinet. Our question is is CoolerMaster 850 Watts power supply enough for our machine? Or we have to put 1050 Watts power Supply? Please suggest the best Brand and Wattage of SMPS we have to buy for our system. Thank you.

  Read the article

• Secondary drive corrupted/not reading

  - by Sebastian

  When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

  Read the article

• Only 2.99 Gb RAM usable out of 8GB in Windows 8 32 bit [closed]

  - by user1832280

  Possible Duplicate: 8gb ram in 32bit operating system I have installed 8 GB RAM in my system. Also upgraded OS to Windows 8 32 bit. My System configuration: Intel i7 960. Ram Crossair 4 GB X 2 1666Mhz Motherboard Asus Rampage III Gene Video card: NVIDIA GeForce GT 240. 2 TB Seagate I have updated all drivers BIOS also. But my system showing only 2.99 GB out of 8GB usable RAM. Please help me fix this problem.

  Read the article

• Windows XP-Physical memory dumping

  - by Raghav Bali

  I have windows XP professional installed on my desktop. It shows up the following errors - Physical memory dumping blue screen. : This aint a new problem, i have been facing this problem ever since i bought this systme. initially the maintainence guy said it was a faulty hard drive and i have got it replaced 3 times already in the past 1 yr. The system gets utterly slow after a usage of around 2-3 months and then these errors crop up and i have to reinstall my windows to keep away these errors. But this time,its been only a week and the blue screen has come up 3 times. What can be the actual cause of the error?? Mine is an assembled machine, its a core 2duo with gigabyte motherboard and a 1 gb ram, 160 gb seagate hdd. please help me its a seriously annoying problem. Edit : A new error recent popprd up, what should i do now??

  Read the article

• Can hard drives experience magnetic interference from a server chassis?

  - by eek142

  I'm currently building a server, and it's exhibiting the weirdest behavior with the hard drive. It is a 2U case, and I have trouble trouble accessing the Seagate SATAIII hard drive when it is in the bottom slot of the hard drive cage. The case is made of galvanized/anodized steel. I thought the drive was DOA, but then I swapped it into the top slot, and the problem was solved--the system had no trouble recognizing the drive anymore! This got me thinking: Is it possible that the magnetic field from the chassis was affecting the hard drive's functionality? I only have this problem with the mechanical hard drive, not the SSD. Could it be because the chassis is made of steel? I'm baffled.

  Read the article

• Snow Leopard and NAS share

  - by Andreas

  Hi, I bought a BlackArmor 220 from Seagate. When I start Snow Leopard the NAS shows up with its full name under shares. The problem is that when I click the NAS only a folder BA_Backup shows up, all the other folders, I created, don't. When I click the NAS, it says I'm connected as "guest". I mean I can connect by "Go to server" and additionally add the folders to the user startup objects, so they show up when I start my Mac, but when the NAS already shows up, why can't I configure it? Where can I change this? Thanks! Cheers, Andi

  Read the article

• Is mismatched firmware on drives in a raid-6 a bad thing?

  - by bwerks

  Hi all, I recently expanded a raid-1 to a raid-6 with six drives. I ordered all four of the new drives from the same place, and all of them were advertised to be the same drives as the original two--Seagate 15krpm 146gb. However, when I was looking at the drives in the perc6/i utility, one of them appeared to be an earlier firmware version; it had S515, compared to the other five drives with S527. Sure enough, after inspecting the drive itself, the label advertised the earlier firmware version. Running Dell's SAS firmware upgrade utility should have in theory moved them all up to S52A, but when I ran it it moved the S527 drives up to S52A, and left the S515 drive untouched. Is this something to be worried about? If it's something that should be corrected, is there a way to target a particular drive for upgrade since the firmware utility didn't seem to do it by itself?

  Read the article

• 3 TB HDD won't reactivate

  - by isif

  After doing a clean install of Windows 8 my Seagate 3 TB HDD won't reactivate in Disk Management. The two volumes are there but I can't use them for some reason. The drive was previously used with a GPT partition table, I can see the two spanned volumes but can't reactivate either. I backed up all my files from Windows 7 onto that drive and desperately need them back. What can and should I do to get the drive back up and running? When I go to Disk → Properties → Volumes, it claims the drive has a MBR partition style, so converting to GPT somehow without data loss should work. gDisk claims to be able to do that but when I point it to the drive, it claims that it has a GPT partition and a protected MBR partition. Any suggestions on what to do?

  Read the article

• How can I connect a SAS drive to USB? [closed]

  - by dave

  I have a Dell T710 with Seagate Cheetah 15k.7 SAS disks. If the T710 motherboard dies, I'll need to resort to one of my nightly off-site backups and salvage the journal/logfile from the SAS disk to bring the backup bang up-to-date. I need a way of reading the healthy-but-inaccessible SAS disc that does not depend on the only SAS-capable machine I have to hand. So I bought: SAS to SATA Adapter and: USB 2.0 to SATA Adapter with Power ...so that I could read the SAS drive via USB. I can plug it all together just fine. The chain looks like: USB - SATA - SAS. But the drive does not spin up and the computer doesn't even acknowledge anything being attached by USB. Is there a cheap external enclosure I can buy for SAS drives? I can't believe these USB to SATA adapters are everywhere but the USB to SAS adapters are almost non-existent...

  Read the article

• Building a new PC, Installing XP, blue screen of death

  - by Tim

  I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

  Read the article

• Mac Mini won't boot with USB Drive connected

  - by Jens

  Newbie here. I have a 2012 MacMini with 2 x 3Tb Seagate GoFlex Desk external hard drives. Both drives have their own power supplies and work perfectly. I use both MacOS and Windows7 on the Mac for different reasons. Both boot and work fine. The only problem is neither MacOS or Windows will boot while the two USB drives are connected. I must disconnect the USB cables, boot and reconnect them. Then all works fine. Its rather annoying since this is mostly a Media Centre and you really don't want to be playing with cables every day, and I don't leave my stuff on over night. Can anyone help? Thanks Jens

  Read the article

• Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

  - by Farseeker

  I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

  Read the article

• How to copy partition from one disc to another (boot partition keeping all the vital data)?

  - by Patryk

  I have bought a new laptop but the HDD, which runs at 5400 rpm, is not sufficient for me. The laptop runs Windows 7 64-bit. I have my 'old' one (a better one - Seagate Momentus 7200 rpm) and I would like to replace it but without reinstalling everything. And there my question arises: can I copy my boot partition from my laptop hard drive to my old drive so that it will boot from it properly? If so, then how to do it? Will Norton Ghost be useful here? My point would be to just replace this partition and leave the rest.

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• Do SSD hybrid drives perform better than HDD + ReadyBoost flash?

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. This looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

• Computer randomly shuts down with a fading alarm power button and CD drive

  - by Shad

  I am currently experiencing something very very odd. Having build my PC myself, I have never had any issues (or anything heat related). A few moments ago my computer shut down very randomly and everything goes blank, when I looked down on my case's power button it was fading on and off in such way I've had never seen before. I noticed the CD drive all of a sudden also started blinking randomly. What do you guys think this problem is related to? It is definitely not a overheating issue and I am pretty sure my 600 watt power supply didn't blow because right now I am able to turn it on and boot up the PC but 20 seconds later it shuts down (sometimes doesn't shut down for 2 minutes). I have no idea what this is... My specs are (built by myself): i5 3570k (unoverclocked) GTX 560ti Asrock Z77 Pro4-M motherboard 8GB Vengeance RAM 600W Corsair power supply 500GB of Seagate HD Case: Corsair Carbide 300R

  Read the article

• Suggestions for Troubleshooting WIndows 7 lockups

  - by Craig L

  I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

  Read the article

• Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

  - by Giffyguy

  I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

  Read the article

• Windows 7 Locks Up or Blue Screens after installing additional hard drive

  - by Ryan

  I've had my home theater pc for over a year now and it's been running with no problems what so ever. I got myself a new Seagate 2 TB hard drive for the holidays and ever since installing it the pc now randomly locks up or blue screens either upon putting it to sleep or waking it from sleep. The only thing I've tried so far is updating the firmware on the hard drive. The hard drive in question is this one (http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4846365). I do have my minidump file saved off on my home theater pc however right now I'm at work and don't have access to it. Please help! Thank you!

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >