Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 6/516 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• System does not detect USB pendrives

  - by cshubhamrao

  This USB thing is driving me crazy. 2 problems in time span of 3 hours. Ok I was already trying to cope up with "wrong fs type, bad option, bad superblock" error while mounting FAT Drives when to my amazement I discovered that none of the USB Storage devices showed up in the system Useful outputs: - tail /var/log/syslog: root@shubham-pc:~# tail /var/log/syslog Nov 7 21:41:47 shubham-pc colord: device removed: sysfs-HP-v250w Nov 7 21:41:51 shubham-pc kernel: [ 3441.529542] usb 1-1: USB disconnect, device number 11 Nov 7 21:41:53 shubham-pc kernel: [ 3443.820029] usb 1-2: new high-speed USB device number 14 using ehci-pci Nov 7 21:41:54 shubham-pc kernel: [ 3443.952897] usb 1-2: New USB device found, idVendor=0781, idProduct=5530 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952905] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952909] usb 1-2: Product: Cruzer Nov 7 21:41:54 shubham-pc kernel: [ 3443.952913] usb 1-2: Manufacturer: SanDisk Nov 7 21:41:54 shubham-pc kernel: [ 3443.952917] usb 1-2: SerialNumber: 20060876420EC6016847 Nov 7 21:41:54 shubham-pc mtp-probe: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2" Nov 7 21:41:54 shubham-pc mtp-probe: bus: 1, device: 14 was not an MTP device

  Read the article

• Remove Write Protection from USB

  - by Vasile Marian Falama?

  My flash USB is write protected and I've tried every possible methods I've encountered over the internet, to get rid of this. Accessing the usb is not working. Format from my computer, is not working. Clear attributes with DiskPart is not working (can't be cleaned, Current Read-only State is Yes but Readonly is set to false... With Disk Management, I can't delete the partition... Is there any other method... With a specific software or somehow? Edit : I tried this on Windows 8.1.

  Read the article

• How to Dual Boot Windows 7 x64 and Ubuntu 13.04 x64 as BIOS, not EFI

  - by Dizeke

  I want to dual boot windows 7 x64 and ubuntu 13.04 x64, but when I installed it, it doesn't boot. Only windows was booting. I installed ubuntu with " / " 50GB and a "swap" partition 4GB. Could it be that it doesn't work because I'm on bios mode, and that my disk is MBR, not GPT. My laptop doesn't have an option to change boot mode to UEFI so as much as possible, I'd stick to MBR :( Acer Aspire 4755G Intel i5-2450M 2.5Ghz-3.1Ghz Nvidia GeForce GT540M 2GB 4GB RAM DDR3

  Read the article

• Triple boot problem with Windows 7, Ubuntu 12.04 & Fedora 17

  - by daniel

  I just installed Fedora 17 after Ubuntu 12.04, But now I can't boot into any of 2 linux, I also have windows 7 installed and I can boot to it, I edited boot with EasyBCD. During installation of Fedora 17 I used standard creating partition and used Separate "/boot" , "/", "Swap" , "Home" for Fedora 17, Is this fixable? or I have to reinstall 2 OS? Also Is possible to share one "Swap" partition? And I am on Ubuntu live cd. Thanks for any guides.

  Read the article

• Windows no longer boots on dual-boot system

  - by N Alex

  While trying to delete an Ubuntu partition from my hdd I accidentally rebooted my computer. (Note: the partition was originally made from an existing partition using paragon.) After that when I tried to start the computer I got the GRUB rescue terminal prompt. I wasn't able to do much from that, but I did manage to boot Ubuntu from a USB drive and to run boot-repair. But now when I try to select Windows 7 from the boot selection menu I get the error 0xc0000225. Here is the link to the BootInfo summary created by boot-repair: http://paste.ubuntu.com/1032584/ I have a lot of very important data on my hdd and I would really appreciate your help.

  Read the article

• unable to access usb device.

  - by Tom

  Hi everyone, I'm reading my boot logs, at /var/log trying to understand why the boot process is taking so long. I found that the system can't access many usb devices, but can't understand why. Is there a way to stop Ubuntu from trying to access them? Here are the lines: /var/log# grep -r "usb_id" . ./boot.log:usb_id[716]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/mouse1' ./boot.log:usb_id[721]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./boot.log:usb_id[725]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' Any help will be greatly appreciated. Thanks in advance.

  Read the article

• Windows is not available in GRUB's boot menu, but Windows Recovery is available

  - by rafalcieslak

  I had Windows Vista installed on a laptop. I have installed separately Ubuntu, wanting to have a dual-boot system. Now, Ubuntu works OK, but I am unable to boot into Windows. GRUB menu provides me with two entries: "Windows Vista (loader)" and "Windows Recovery Environment (loader)". However, BOTH boot into recovery environment. Running sudo update-grub does not change anything. I use an up-to-date 10.10.

  Read the article

• Boot problems w/ External HDD

  - by JeremyT

  I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

  Read the article

• Cannot boot from K/Ubuntu install disk on my UEFI system

  - by user93241

  I just got a new system and have been trying to get it set up w/ Win7 & Kubuntu dual-boot, but I've got a major problem. The BIOS of my motherboard (an Asus Crosshair 990FX) is strictly UEFI -- there is no legacy support mode available. I've been reading up on how to get Kubuntu installed in UEFI mode but no matter what I try I cannot seem to even boot into my install CD/USB key properly. I can get as far as the selection screen ("Try Kubuntu", "Install Kubuntu"...) but this screen starts off not appearing correctly. If I try moving the cursor around it sometimes seems to correct itself and show me my choices. But once I select "Try Kubuntu" it starts loading, the screen goes black and then proceeds to flicker -- about once every 5-10 seconds or so. This continues indefinitely. I've tried this with both Kubuntu & Ubuntu installation media, even the AMD64+Mac Ubuntu variety that is supposed to be a lot more flexible w.r.t. UEFI. The only hint I've had that the system might have booted correctly is a little drum sound that plays when booting from the Ubuntu install disk. Well, that and the fact that when I hit my system's power button it seems to shut down correctly, even ejecting the CD at the end. This might be a video driver issue; my system has two nVidia 550's, one of which is attached to my primary monitor. (The secondary isn't hooked up yet.) I'll keep looking over similar questions but any advice would be greatly appreciated. UPDATE: I've tried booting into my 12.04 install CD twice now, each time using two different options supplied by my BIOS. One seemed to offer the ability to boot into my CD under UEFI mode -- this didn't even produce the initial boot menu. The other method offers the ability to boot into my CD NOT under UEFI mode. This DOES produce the boot menu, but after this point it seems I still cannot get to a proper video mode to see what's going on.

  Read the article

• unable to boot from live USB!

  - by ramblinman

  Linux noob here. I was messing around with my new dual-boot (win7 and the latest ubuntu, 12.04 I think?) Long story short, I deleted some partitions that I shouldn't have. When I boot up the machine, I get: error: no such partition. grub rescue _ I know that I could probably fix this by booting from the live USB. But I can't boot from the live USB either! On startup, I can get "boot from drive" options by pressing F12. (This is how I installed Ubuntu in the first place.) But when I select the USB drive, I get this error: error: no such device: [long string of letters and numbers]. grub rescue _ I've searched around for a fix but most threads addressing the first problem suggest booting from live drive. And I can't do that! Any help much appreciated.

  Read the article

• Cannot boot Windows 7 after installing Ubuntu 13.04

  - by whowantsakookie

  So I boot up my computer after installing Ubuntu 13.04. Grub correctly shows me all available boot options and I am able to boot to Ubuntu. However, when I try to boot into Windows 7, grub hangs at a purple screen. I have an HP laptop. It came with all four primary partitions taken up by the Windows bootloader, the actual Windows partition, one called HP_TOOLS, and another for HP Restore. I was able to back up and delete HP_TOOLS and the recovery partition, and change my disk type from Dynamic to Basic (GParted doesn't recognize Dynamic drives). I then booted into a live session of Ubuntu and made two partitions with GParted: one large partition for storage space that I could use between the two operating systems (sda4), and another extended partition (sda3) which contained Ubuntu (sda6) and it's swap space (sda5). It currently looks like this: I'm not sure if the second paragraph is actually relevant, I just want you to know all the variables in the equation. Thank you in advance for helping this poor noob.

  Read the article

• configuring USB modem( Huawei EC156) in ubuntu 13.10

  - by user205427

  I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

  Read the article

• accessing live usb files from new hd ubuntu install

  - by Robin Bailey

  After my live USB (ubuntu 12.04 lts) refused to boot, I proceeded to install the same Ubuntu version on the laptop hard drive (a dual boot next to Win xp). This all went well without a hitch. Previous to this, I spent several weeks enjoying and exploring ubuntu from the usb pendrive. During this time I changed lots of settings and customized Firefox and more. Now, I'd like to import the home folder from the usb drive into the new install home folder on the hard disk, which is the purported folder that holds all those special settings to my knowledge. Unfortunately and only being familiar with Windows file systems, the view of the usb file system from the new hdd install is totally perplexing. I can't find anything that looks anywhere close to the original file system. More, I can't find any of the files I had created and stored there, like the LibreOfficeCalc file that has all my passwords (this one is really discouraging) that was stored on the ubuntu desktop. Help me find this file alone and I'll bow down with full apologies to any and all computer gods. Being able to import all those customizing settings into the new install would be a major bonus also, but hey, I'm not greedy. I'll take the passwords file and be happy! And humble! I would be very grateful for some clear, understandable help on this. Thanks

  Read the article

• Ubuntu 12.10 - Windows 8 Dual Boot (Tried boot-repair) - Dual OS option not showing

  - by Anand Danani

  as title says, this is my first time trying ubuntu. I have been trying since last week with continuous googling and searching, but still no luck. I had win8 x64 installed before, then tried installing Ubuntu 12.10 desktop (dual OS option) I tried like 10 times already, everytime it's showing installation complete, but when i restarted and boot from my HDD, dual boot option is not showing, directly to win8 startup I installed win8 on C before. I had a 104gb free drive to install linux to (it's installed already.. but the dual boot option is now showing) In case it helps, Laptop Model : Acer Aspire 4752 Intel Core i3, 2.30GHz Ram 4GB 64 Bit OS - Windows 8 Pro with Media Center This is the url i got from the boot-repair http://paste.ubuntu.com/1407018/ (it's not win vista, thou it seems showing so in the link) Thanks a lot.. Any help will be greatly appreciated. I really want to get my Linux installed. Ken D

  Read the article

• unable to boot and boot-loop on splash screen

  - by Joel St Martin

  hey i have tried to install ubuntu many times, but once it installs it boot-loops at the splash screen. it just loops through the boot sound and the screen not sure why. nothing has seemed to work. also its only alowing me to boot windows all other oporating systems crash and loop just like ubuntu (android x86, linux mint, red hat, ubuntustudio). compac amd 64 3400+ 1gig ram 2 hhd (200 gig/120 gig) 1 ssd (500gig) win7 x86 a video showing what happens

  Read the article

• After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports.

  - by sin

  I have a big problem! After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports. I have to install windows in other PC which has usb 2.0port only! so I made usb booting disk using usb 3.0 in 3.0 port. but after that it never worked except in 3.0 ... and I could't restore my usb. I alredy fomated in cmd and others in usb3.0 port! but there is no change. and I couldn't find it in usb 2.0 port. plz help me.

  Read the article

• My fresh installed ubuntu 12,4 won´t start without live usb drive

  - by Alexander Neira

  I just installed a fresh copy of ubuntu 12,04 in my netbook, through a live USB drive. I used the whole HDD and erased an existent win 7 partition. It installed everything and then asked me to reboot. When I did that, after rebooting, it only appeared the writer marker on top of a black screen and only that. Then, i plugged in again my usb drive and reboot. It loaded, but in the loading screen sent me (once) an error about the hard drive, that some file was missing (sorry i coulnd't write down the exact message). After that, I tried to re install ubuntu using my USB drive, but it sends me inmediately to the login screen. How do I solve this?

  Read the article

• My ubuntu partition was deleted and I can't boot from either a DVD or USB

  - by ropudito

  It's my first time installing ubuntu. I have Windows 7 and 8 before in my laptop (Acer Aspire 4752z). After Ubuntu (12.04) installed in my laptop, the Windows boot loader didn't recognize my Ubuntu so I updated grub from a live USB. And after grub updated, Ubuntu was booting perfectly but my Windows wasn't listed in the grub menu. So I follow someone instruction to update grub again. And after reboot, the grub menu didn't show anymore. After searching about this problem on the net and trying to update grub again and again, I decided to delete the Ubuntu partition from live USB. And shortly after, I booted to Windows with Hiren boot and I used mbrfix. But i think it failed. Now i cant show my BIOS setup or boot from DVD or USB. After that, the only screen i can see after booting is: error: unknown filesystem grub rescue>

  Read the article

• Is there a better way to run ubuntu from usb disk

  - by Adam Butler

  I have an old laptop with a broken hard drive controller and am running the previous ubuntu from a usb. I installed this as per standard instructions by running some program that copied the live cd to the usb. This has had a few problems, it seems like it was just made for trying and not for everyday use. Ideally I would like to do a proper install to the usb disk instead of just running off the installer disk. Is there a way to do this? The main problems I have are: When adding mounts to fstab it gets overwritten on each reboot When installing updates the kernel cannot be updated

  Read the article

• Trying to boot from usb

  - by iron

  I have similar issues but none with the 12.04 build. Im trying this on a dell d610 laptop with a bad hard drive and was told i could just directly boot from the usb drive. Im using an 8g usb drive and i have tried using the uui tool and get this message. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2011 H.Peter Anvinet al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Then i tried using unetbootin and got the bootup screen with only the default option and it would say auto boot with a 10 sec countdown and start over again. I do have the boot sequence for usb first.

  Read the article

• Problem with setting up a bootable USB on corrupted OSX

  - by Nick

  I cant access the desktop because my harddrive is corrupted. Therefore I want to make a bootable USB stick so i can transfer all of my important files to my External HD. Problem is that Im stuck on Step 3 --- http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx . Im not sure of what i should change this to: hdiutil convert -format UDRW -o ~/path/to/target.img ~/path/to/ubuntu.iso It says convert failed - No such file or directory. Obviously the problem is that i dont know the path to the USB, maybe you know how to find out? Please help me. Thanks. ps. Ive downloaded the ubuntu desktop amd64+mac. pps. Unetbootin is a different alternative, but i dont know if it works?

  Read the article

• Trying to boot from USB on Asus q200e-bhi3t45 just brings me to grub menu

  - by Krash Kharma

  It's been a struggle every time I've tried to change my OS on this machine. I honestly don't even know how it works whenever it does. I've somehow managed to get Windows 7, Windows 8, Mint 14, Ubuntu 12.04, and 12.10 to work at random times but it's always after struggling with it and googling for random chance fixes and suddenly something clicks and it loads from usb, but 99% of the time, every time I try to boot from USB to install a distro (in this case, I'm trying to get ubuntu-12.04.2-desktop-amd64.iso to work) my pc just comes up with a grub menu ("Minimal bash-like blahblahblah - grub ") I don't know why it works when it works. Right now I've tried everything from with/without Fast Boot in BIOS, with/without CSM, with/without secure boot, to changing BOOTx64.EFI to bootx64.efi to downloading a new bootx64.efi to copying it to every folder on the usb.... It makes no sense to me. Sorry if this has been asked before but I can't find anything

  Read the article

• Usb boot device totally unable to be formatted

  - by fuqda

  I'm really upset by now, I've been trying 2hours straight to format a stupid usb drive (I'm new to ubuntu and I dont know if I will last long at this rate) Basically this was the lubuntu boot usb key I tried to remove files with sudo rm I tried to format disk with disk utility I tried to format disk with gparted (with unmounting beforehand) NOTHING WORKS. I cant delete a file. I cant move a file to the usb key. I cant do anything. This is really infuriating.. I dont know what to do ? here are some gparted errors while trying to format to fat32 after unmounting error fsyncing/closing/dev/sdb: input/output error input/output error during write on /dev/sdb when I try to remove by hand, it says "read-only file"

  Read the article

• Ubuntu 12.04 won't boot from USB

  - by user986871

  I downloaded Ubuntu 12.04, then using the tool Startup Disk Creator i made the live usb. I checked that it's bootable Device Boot Start End Blocks Id System /dev/sdb1 * 62 15635593 7817766 c W95 FAT32 (LBA) Now on my lap top it boots nicely, but on two other machines that don't have any installation of ubuntu(no Grub) it doesn't boot. I changed the booting order so that USB is before HDD. So i think i did everything i know, but no luck. How can i use this USB drive on other devices that don't have any previous ubuntu installation.

  Read the article

• error: no device connected

  - by Prabath Swarna

  I did a fresh install of 12.04 and it went fine, worked on it for several days, but one day the browser crashed and i reset the machine, after that I get this error when i boot; error: no device connected error: no device connected error: no device connected error: no device connected This comes after the BIOS confirmation, and it stays for about 30 seconds, then the grub menu comes and when I selected the default the screen becomes purple and stays like that for a whole Minuit. I thought maybe that is because I have 500GB HDD so i ran the boot-repair, It did nothing at all. I'm sure I did the boot-repair thing right, sorry I forgot the paste URL. If i reinstalled will this error persist.

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >