Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 602/1080 | < Previous Page | 598 599 600 601 602 603 604 605 606 607 608 609  | Next Page >

• Solution to wirelessly project tablet desktop?

  - by Robert

  I’m trying to find a device that would allow a windows 7 client to wirelessly connect and display their screen to a projector while still connected to the wireless network. The idea is to allow a professor to still project and display content while walking around the room with their tablet. To date, haven’t been able to find a solution that meets the requirements, has anyone stumbled across one yet? Requirements Must support Windows 7 Must be able to connect to WPA2 Personal(and hopefully enterprise) Must not use any usb dongles – those get lost/damaged given a chance. Goal Wirelessly display screen to projector without cables from tablet/laptop.

  Read the article

• Is it really necessary to call /bin/sync twice before an unmanaged power-off?

  - by Jeremy Friesner

  Hi all, My company sells an "embedded device" which is implemented as a headless Linux box with ext4 on an internal SSD. Some of our users have a habit of doing a "save current settings" on this box, and then cutting power to the unit as soon as the unit reports that the save completed (ie two seconds later). This was causing occasional corruption of the saved files, as the data wouldn't always get flushed to the SSD before the power went out. So I tweaked my software to run /bin/sync immediately after writing the file (after closing the file handle but before notifying the user that the save completed). This appears to fix the issue, but my coworker says that one call to /bin/sync isn't sufficient, and that to be really safe I ought to run /bin/sync twice in a row. That sounds like paranoia to me... Perhaps a habit from earlier versions of Linux or unix whose sync utility didn't work reliably. Does his advice have merit, or should one call to /bin/sync suffice?

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by ajit.george

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues? Thanks in advance.

  Read the article

• How to play from mic to speakers in Ubuntu Karmic?

  - by vava

  Ok, I have a silly problem. I have few bluetooth headsets lying around and I want to make DYI baby monitor out of them. All I need is for some application to listen to the mic and send it to the speakers. Loopback (even though it doesn't work) is not good enough, it'll send sound from the mic to the speakers in the same device but I need it to go across devices. So does anyone know some application that can do that? I'm looking for something small and easy to use, not jackd or similar.

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• Cloning a linux system from sdx to cciss

  - by churnd

  I have an HP ML 310 server running CentOS Linux 5.5. I'm buying a RAID card (LSI 9260-8i) to set up a mirrored OS drive. Right now, the boot drive is set up with GRUB installed on the MBR of /dev/sda & has a 100MB /boot partition for /dev/sda1, then the rest is configured in LVM with a 20GB with a 20GB VG for the root partition & ~80GB VG for home. The new disk sizes will also be slightly larger as well. What is the best way to clone the boot drive to the new CCISS device?

  Read the article

• Server 2008 R2 Datacenter (and all other version) not detecting hardware

  - by Mitchell Skurnik

  I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

  Read the article

• Resize PV on LVM

  - by Paul Tarjan

  I have this: Device Boot Start End Blocks Id System /dev/sda1 * 1 1217 9775552 83 Linux /dev/sda2 1218 60801 478608480 83 Linux And I'd like to shrink sda2 by about 10 Gigs to give some more space to sda1. sda2 is a PV on an LVM, but there is some free space in the VG so I don't have to worry about filesystem shrinking. How can I tell my LVM to move the data off of the first 10 gigs of sda2 and then redo my partition table to give it to sda1? (I don't have enough free space to just pvremove sda2, which would be the easy solution).

  Read the article

• Oracle 10g cannot see any data in tables

  - by MMRUSer

  Im getting this error in Oracle 10g log file 2010-11-12 16:07:41.838: [ OCROSD][3069777600]utgdv:2:ocr loc file cannot be opened 2010-11-12 16:07:41.865: [ OCROSD][3069777600]utopen:1: Couldnt find ocr,[ocrmirror] location in config file 2010-11-12 16:07:41.865: [ OCRRAW][3069777600]proprinit: Could not open raw device 2010-11-12 16:07:41.865: [ default][3069777600]a_init:7!: Backend init unsuccessful : [33] 2010-11-12 16:07:41.865: [ CSSCLNT][3069777600]clsssinit: error(33 ) in OCR initialization I was able to connect but can't generate table data form my client program. Plus it was working earlier. Im running on Redhat EL 5 Thanks.

  Read the article

• ACHI drivers for W8.1 with amd

  - by LeiNaD_87

  I hope you can help me... I just installed a SSD (Samsung EVO 840) and windows 8.1 pro in my pc with M5A99X EVO ( chipset AMD 990X/SB950 ) motherboard. The SSD is installed in sata3 socket using a sata3 wire. The AHCI mode is ON in the bios. I configured the ahci controller and now device administrator looks like this: All works, but the speed of the SDD is very slow (like a HDD). Samsung magician doesn't recognize the sata mode neither the ahci. I tried to install more drivers but the system broke and I need to reinstall windows :( I tried many things from the web, but any works: Modify windows registy Use compatibility mode Modify the amd drivers and install it unsigned Thank you for your time!! EDIT to add a CrystalDiskMark benchmark

  Read the article

• USB forwarding from dom0 to domU

  - by Karolis T.

  What are my options to forward two USB connected phones to xen guest? I've read about PCI-passthrough http://www.wlug.org.nz/XenPciPassthrough, but I'm sure usb controller in the server isn't a pci card. There's device level forwarding, but I need to forward two devices, this here doesn't say how to do it: http://www.olivetalks.com/2008/02/03/usb-forwarding-on-xen-it-just-does-not-work/ Would something as simple as: usbdevice = [ 'host:xxx', 'host:yyy', ] work? EDIT: I'm now starting a bounty. This is really important for me and for other people also, hoping someone who have this resolved will be able to help.

  Read the article

• Problems with webcame

  - by Murtaza

  My friends is using windows 8.1 and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged that that webcam and windows detected it and installed drivers automatically. Then I opened Skype for checking webcam. I got massage on top of Skype that "your webcam has microphone" when I clicked over it, it directed me to sound settings where I microphone of webcam was working. I went to videos settings but webcam wasn't listed their. As you can see in image. Webcam is listed in device manager but isn't listed in Skype. I am also using windows 7 professional. Any idea why it is happening?

  Read the article

• Access my router's gateway network?

  - by Danpe

  I have 2 routers in my place. Main Router (Connected to the Internet) - 192.168.1.1 Secondery Router (Connected to the Main Router) - 192.168.0.1 I have a Network Storage Device and few Shared Directorys connected to the Main Router. (Network Storage - 192.168.1.16) How can i acces one of them using a PC connected to the Secondery Router? Home Network Diagram: I currently have access to the internet using both laptop and Main PC. But i want to get access from my laptop to the Storage and to ym shared directorys. The problem is the my Main router always forwards all packets stright to the WAN.. (Internet)

  Read the article

• IPsec VPN tunnel between Windows 2008 R2 and CISCO ASA?

  - by antur123

  I need to create a VPN IPsec tunnel between my Windows 2008 R2 server and a CISCO ASA device. I want my server to be both the end of the tunnel, and the server that connects to the other side (no need to connect a whole subnet, just the server would be fine). I found this article that seems to do the trick, but there are two differences: As mentioned above, the computer behind my end is the server itself. Can that be configured? (i.e. make the "computers in endpoint 1" IP address be the same than "local tunnel computer"). This article is for Juniper ScreenOS, not for CISCO ASA, though configurations look very similar. Would that configuration work for me?

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

  - by David Pearce

  I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

  Read the article

• Incremental backup and sync software

  - by martjno

  I need a free software for Windows (with gui or command line) that does incremental backup copying all files and storing changed or deleted files in a directory named like last change date (or a progressive number). To be more precise: D:\ is my Data drive E:\ is my Backupdrive. If i want to backup all my data from D:\: E:\d_lastbackup\ will contain a plain copy of all the files and folder content (no compression or archiving, same files attributes) of D E:\d_20090822\ will contain all files (with their full path) that are changed or deleted in the last version (since the previous one) E:\d_20090820\ will contain all files (with their full path) that are changed or deleted in the last version (since the previous one) and so on... I had a software working prefectly with an old USB harddsik by Maxtor, but it works only on that device. Any suggestion?

  Read the article

• i[Pod|Phone|Pad|*] backups in iTunes

  - by Maroloccio

  iTunes <- iPhone. At sync time, a back-up is performed. Which data is included, which data is not? i.e. are songs (potentially redundant) backed-up so that a computer ends up having both the source file on the filesystem and the copy within the device back-up? Is anything on the iPhone filesystem not backed up? (i.e. on a Mac using Time Machine, some files are excluded from the back-up even if not all of them can be recreated upon restore - I lost my postfix config this way..)

  Read the article

• How to add addtional disks to a Windows 2008 KVM based Guest?

  - by taazaa

  I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• boot failure trying to install linux distro from a cd

  - by jdamae

  Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

  Read the article

• Why would http & https be blocked, even in safe mode with firewall disabled?

  - by Cogwheel

  I have a windows 7 machine (dell studio xps). Everything on it seems to be in working order. The network device says it has internet connectivity, and indeed I can ping websites, transfer files via ftp, connect to vpns and remote desktop, but the web won't work. I've disabled the windows firewall and still no go. There are no other firewalls installed. The computer came with a trial of norton 360 so I also used the norton removal tool (which solved a similar problem on another computer for me previously). Any thoughts?

  Read the article

• rsync remote to local automatic backup

  - by Mark Molina

  Because all my work is stored on a remote server I would like to auto backup my server monthly and weekly. My server is running Centos 5.5 and while searching the web I'm found a tool named rsync. I got my first update manually by using this command in terminal: sudo rsync -chavzP --stats USERNAME@IPADDRES: PATH_TO_BACKUP LOCAL_PATH_TO_BACKUP I then prompt my password for that user and bob's my uncle. This backups the necessary files from my remote server to my local device but does somebody know how I can automate this? Like automatic running this script every sunday? EDIT I forgot to mention that I let direct admin backup the files I need and then copy those files from the remote server to a local server.

  Read the article

• Cisco redundancy modes

  - by user974896

  I am using a Cisco 6500 series with an SSO redundancy configuration. The show redundancy output is as follows: Hardware Mode = Duplex Configured Redundancy Mode = sso Operating Redundancy Mode = rpr Maintenance Mode = Disabled Communications = Up I would assume the device is operating in RPR mode although SSO is configured. What could cause this? Shouldn't the operating mode be SSO? EDIT (show redundancy states): my state = 13 -ACTIVE peer state = 4 -STANDBY COLD Mode = Duplex Unit = Primary Unit ID = 5 Redundancy Mode (Operational) = rpr Redundancy Mode (Configured) = sso Redundancy State = rpr Split Mode = Disabled Manual Swact = Enabled Communications = Up client count = 60 client_notification_TMR = 30000 milliseconds keep_alive TMR = 9000 milliseconds keep_alive count = 1 keep_alive threshold = 18 RF debug mask = 0x0

  Read the article

< Previous Page | 598 599 600 601 602 603 604 605 606 607 608 609  | Next Page >