Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 605/1080 | < Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• Protect Windows VPN from Unauthorized Users

  - by kobaltz

  I have a VPN connection that I use while away from home to remote into my home network. I would use a zero config solution like Hamachi, but need access from my mobile device. Therefore, I have my Windows Home Server acting as the VPN server and will accept incoming connections. Both the username and password are strong. However, I'm worried about brute force attacks against my network. Is there something else that I should do to protect my network from having unauthorized access attempts to my network? I'm familiar with Linux's FAIL2BAN, but wasn't sure if something similar existing for Windows.

  Read the article

• MacBook repeatedly disconnects from Wi-Fi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4 GHz). The Wi-Fi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the Linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without any issues. The problem also seemingly becomes more pronounced after midnight. What could the problem be? Edit: Here are the logs that Spiff requested: http://pastie.org/951761

  Read the article

• Auto-connect Bluetooth headphones in Windows 7 64bit

  - by CptSkippy

  I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

  Read the article

• How to make XP install ubuntu from USB?

  - by Apoorv

  I want to install ubuntu on my PC which is running windows XP right now. I have made my pen drive bootable and have loaded Ubuntu on it. When I insert the pen drive at the time of booting of my PC, nothing happens and windows XP starts normally instead of asking me if I want to boot from my pen drive. Also when, I entered my BIOS setting to change the boot order there was no option of pen drive as a boot device. Please suggest me a way to install the OS using my already made bootable pen drive. And there's no problem with my pen drive cause I have tried it on my friends PC and it worked normally. Thanks in advance

  Read the article

• Ending a program on Windows Mobile 6 that refuses to die

  - by Brandon

  I have an application that was installed on a handheld device running Windows Mobile 6.0. The application basically connects to a remote server and sends scanned barcodes to it. The application shut down unexpectedly, and now it refuses to go away. I tried starting it up again and nothing happened. I went to the Running Programs, hit Stop All, and it ended everything but the application. It gives an error saying it's not responding, so I try to End Task, and it does nothing. I even uninstalled and reinstalled the application. Is there any way to kill this thing?

  Read the article

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• Windows 8 not booting from DVD while trying to install in a Ubuntu 14.04 system

  - by Tom

  Currently my system runs on Ubuntu 14.04. Yesterday, I deleted and formatted the partition(C drive) as NTFS in which Windows 7 was installed because Windows 7 was not booting for more than a week. I have a Windows 8 disk and it was able to boot from that disk when there was Windows 7 on my system. After the formatting of C drive yesterday, I tried to install Windows 8 by booting from the disk. Unfortunately, this time no booting happened from the disk. So I pressed F2 during the system start up and checked Boot Device Priority, Optical Drive has the first priority there. So why Windows 8 didn't boot from the disk ? I need to install Windows 8 too in my system without doing any damage to Ubuntu 14.04. How can I do it ?

  Read the article

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• How to lie to Win98 about USB drivers?

  - by BCS

  I have a new printer and a old (Windows 98) system (that can't be upgraded). I've been told that some of the drivers for older printers of the same make are very likely to work just fine for it if I can talk windows into using them. Is there a way to edit the map of device IDs (VID/PID?) to USB drivers? The specific kind of tool I'm looking for should work for any kind of USB drivers, not just printers. OTOH if someone knows of a technique that work for some kinds of printers, that could be of (general) interest.

  Read the article

• xen hotplug can't add vif to eth0: operation not supported

  - by John Tate

  I am new to xen and I am trying to get a domU running but I am having problems with it. I think my network card might not support bridging which is bizarre. This is the error I get when trying to create the domU [root@hyrba ~]# xm create sardis.secusrvr.com.cfg Using config file "/etc/xen/sardis.secusrvr.com.cfg". Error: Device 0 (vif) could not be connected. Hotplug scripts not working. All the xen kernel modules are loaded... xen_pciback 52948 0 xen_gntalloc 6807 0 xen_acpi_processor 5390 1 xen_netback 27155 0 [permanent] xen_blkback 21827 0 [permanent] xen_gntdev 10849 1 xen_evtchn 5215 1 xenfs 3326 1 xen_privcmd 4854 16 xenfs I get this error in /var/log/xen/xen-hotplug.log RTNETLINK answers: Operation not supported can't add vif2.0 to bridge eth0: Operation not supported can't add vif2.0-emu to bridge eth0: Operation not supported

  Read the article

• Unable to use cloned VM, OpenSUSE, VirtualBox

  - by Kremchik

  I've cloned a VM and now while booting it I see a message: Trying manual resume from /dev/sda1 Invoking userspace resume from /dev/sda1 resume: libgcrypt version: 1.5.0 Trying manual resume from /dev/sda1 invoking in-kernel resume from /dev/sda1 Waiting for device /dev/disk/by-id/ata-VBOX_HARDDISK_.....-part2 to appear: ... Could not find /dev/disk/...-part2 Want me to fall back to /dev/disk/...-part2 (Y/n) If I press 'Y' it tries to boot again with failure, then exits to /bin/sh. If I press 'n' it exits to /bin/sh immediately. I've read a solution here: http://diggerpage.blogspot.com/2011/11/cannot-boot-opensuse-12-after-cloning.html but I don't understand how to access files on disk to edit /etc/fstab and /boot/grub/menu.lst?

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• Start Daemonised GNU Screen from script a allow calling script to end

  - by tez

  I have a script on an embedded device that calls screen to start if a user logs in via a ssh session... #!/bin/sh SCREENRUNNING=`pgrep SCREEN` if [ -z "$SCREENRUNNING" ]; then echo "Screen not running so let's start the Master session sleep 2 screen -dmS Master sleep 2 screen -x root/Master else echo "Screen is already running let's connect to existing session" sleep 2 screen -x root/Master fi However this keeps the calling script active till the screen session exits,even if it's detached. What I want to do is have the calling script finish and exit while the screen session stays active. I've tried daemonising the screen -x lines and adding an & to the end of the screen -x lines neither of which work properly. Ideas?

  Read the article

• USB MFP print server that works with Windows x64?

  - by hangy

  Right now, we are using the Longshine LCS-MFP101-2 to connect to our MFP device (printer/scanner combo) over LAN. However, the required driver (RMVUSB, Remote Virtual USB) cannot be installed on 64 bit Windows operating systems such as Windows XP x64 or Windows 7 x64. Since the distributor lists the product as "phased out", I do not expect any updated 64 bit drivers any time soon. :/ Because of that, I am searching for a relatively cheap SOHO MFP print server (1 USB port should be enough) which can be used with 32 bit and 64 bit versions of Windows. Do you have any ideas or recommendations? Thanks!

  Read the article

• "ant" is not recognized as command in Windows

  - by user1294663

  This is my first time developing Android applications. I'm developing an Android app on Eclipse on Windows 7. I would like to run the Android app from the Windows 7 command line interface. I have my Android device connected to the PC. The workspace directory that I use to store the Android project is C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I opened the command line interface and I changed the working directory to the Android workspace directory. cd C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I included Android sdk platform tools directory into the PATH environment variable. c:\Users\admin\Android-sdks\platform-tools Then I entered this into the Windows 7 command line interface: ant debug I have this error message on the cmd: ant is not recognised as an internal or external command, operatable program or batch file. What is the solution to this problem?

  Read the article

• Windows 7 - Wireless connection before login possible?

  - by EJ

  Is there a way for Windows 7 to connect to a wireless network before a user has logged in? I have found no good answers to this question elsewhere. Some say it should already be happening if I am using Windows' connection management (WLAN AutoConnect, formerly WirelessZero), but I am using that, and it is not. I can sit at the login screen for as long as you please and it will not connect (watching the router from a separate PC), moments after I login it will connect. Others have said that you need to use the manufacturer's connection management (not Windows'), and they can sometimes have the option for prelogin/prelogon connections, but I am using generic drivers. The device is a Netgear/Cisco WMP300N, with a Broadcom chipset. Netgear/Cisco and Broadcom all claim to not have drivers for Win7, but Win7 apparently comes with a functional driver.

  Read the article

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• HP laptop won't recognize wireless adapter

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. Is there some way, short of installing a new adapter, that I can work around this problem? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers. See this related question where I ask how to use an old Windows Mobile phone as a Wi-Fi (not cellular data) tether.

  Read the article

• Is there any way to use devices like mp3 players when they are charging?

  - by GeoB

  The question is simple I think. All we have encounter gagets that they don't fuction while they are in charge, like cameras or mp3 players. But, we know that cell phones or laptops can have full function, when they charge with a charger, like USB connector. Is it in the programming? Why this happens? Can we change that with some device e.g. controlling the charging? I want to use a portable USB charger for my mp3, but I can't wait 3 hours for it to charge, because I cannot listen to music. It notices the charger, and gets in charge mode. Nothing functions until I unplug it. Thanks a lot

  Read the article

• How do I disable microphone volume auto-adjusting?

  - by balpha

  My coworkers started yelling at me today because apparently I started screaming in their ears during a Google hangout. And sure enough, when I go to the Microphone settings dialog, I can see the level being auto-adjusted constantly; sometimes way too high. I don't think this has happened previously; at least nobody ever complained. Can I find out who is doing that auto-adjusting, and more importantly, can I turn it off? I couldn't find any related setting in the recording device settings. I'm using Windows 7 64bit, and (I'm mentioning this because the theory has come up that it may be related) I don't have Skype running.

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

• Pendrive not working on USB port - USB2 Enhanced Host Controller - 27CC

  - by user1664417

  I have a situation here, is kind of weird. Situation as below: If i enable the 'Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC' , then my pc will not be able to read any USB stick/pendrive, but usb port work fine with keyboard and mouse. If I disable the device driver, then all kind of pendrive can be read. Below is What i have done : 1) try the same pendrive on other pc, it work like charm. 2) try others pendrive on issue pc, same problem, but it work fine in others pc. 3) try all the port, including the port that connected to mouse n keyboard. 4) update the driver version. 5) restore default setting of usb in bios Please help to solve these issue if anyone experience it before. Many thanks.. :

  Read the article

• Google Analytics unexplained spike

  - by Dianne

  My client's Google Analytics has had a spike everyday from May 6th (from 0 - 100.) This is in a city that he is not optimized for and does very little business in. The hits are coming in direct to the website. My client is concerned that it has something to do with competition using his site as a price shopping device. I can't view the ip to see where they are coming from and his site is not built in PHP so the work around doesn't work here. Any thoughts? Could it be a "referring site" situation and if so is there a way for me to find out what the referring site is?

  Read the article

• Why are my hardware tabs disabled for my VMWare player image?

  - by djangofan

  I just installed a Ubuntu 10.10 image on VMWare player and after I finished installing I was messing with the hardware settings and I did the following: 1. disabled the floppy device 2. changed the CDRom to "use system cdrom" 3. tried to enable the VMWare tools but it complained that the vm was in "Easy Install" mode After I fiddled with the VM now my floppy and 2 CD rom devices as well as sound card and USB settings are all disabled in the VM hardware settings. Any idea on why this occurred and how to fix it?

  Read the article

< Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >