Search Results

Search found 19308 results on 773 pages for 'network efficiency'.

Page 603/773 | < Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >

• Software/internet

  - by Yiannis

  Hi guys, i am using XP SP2, and everything where working fine. Somehow i can go to some web pages, but i cant login to them, for example www.buzzerbeater.com, i cant access my hotmail/msn, outlook doesnt work either, also www.realgm.com, i cant access the forums too. I have tried with IE7/Firefox/Chrome, but same result. I was using avast free edition that i removed, and i dont have any other security software installed. My laptop from the same network works perfectly. Any ideas?

  Read the article

• XDMCP is slow any ideas? (looking for alternative remote desktops)

  - by peteri

  I've been used to using RDP on Windows to remote to machines, and I've got an asus eee 701 which I want to use to do some *nix programming on. While the eee is a lovely little machine the screen and keyboard are a little small to use for lots of programming. I've tried using Xming (the free version) to remote login into the eee from my desktop using XDMCP (or even using a ssh session as a straight X11 server and no desktop on the eee) the whole thing seems seriously slow over wifi the initial desktop takes at least 5 seconds to paint (might even be 10 seconds I haven't actually timed it). So my real question is what do other folks use for remote control with a GUI for their *nix boxes? I am finding it hard to believe the performance is so bad over a wifi network (It makes the Mac IIs I used to use a college in 1988 seem fast) or is this just a problem with Xming and using say the Cygwin X11 server would be better.

  Read the article

• Remote desktop connection over internet without port forwarding?

  - by hellbell.myopenid.com

  Hello, let's say that we have this situation. I want to remote desktop connection to my friend over the internet, but I don't have premission for port forwarding on the router, and my friend also can't configure his router. So the question is how to connect to computer without port forwarding, I know that is out there some programs like teamviewer, or some else that solve that task, but what I looking for is the some free site that can make "bridge" between are two computer, or is it possible to install on computer some program that simulate virtual router or something like this http://www.youtube.com/watch?v=SIof7kFTgJE .... I need this cause I have my own simple remote desktop connection program, but I can't connect to other computer outside network cause don't have premission to configure router :( any comment, link, advice, or tutorials will be very helpful :)

  Read the article

• Hide unauthorized folders from view in webdav

  - by eric.s

  We have a Windows server running webdav. When a Mac connects to it they see the folders they do not have access to as a blacked out folder, and then the folders they do have access to as folders. This does not happen when a client using Linux or Windows connects. All users connect with their domain account credentials. I may not be searching properly to get the information I am looking for, so I turn here. Is this an issue that I should be researching on the Mac side, or ask our network team to be looking into settings on the server?

  Read the article

• How to stream multiple files on demand in VLC?

  - by romkyns

  Is there any way at all that I can set up VLC on a server PC in such a way that I can access a list of all my videos from another PC, and pick one to be streamed on demand? I've been pointed at this streaming guide (pdf), but it's pretty useless. For a start, most of the menus in those screenshots don't match the actual current version VLC, and then it sort of assumes you already know what you're doing. So far I managed to figure out how to stream a single file, which I must choose before watching on the server PC - pretty useless if you ask me! The impenetrable "UI" doesn't help either... (P.S. The reason I'm going for streaming rather than the very simple to set up network drive is described in this question)

  Read the article

• Configuring MPI on 2 nodes

  - by Wysek

  I'm trying to create really simple "cluster" from 2 multicore computers using openmpi. My problem is that I can't find any tutorials on that matter. I don't want to use torque because it's not necessary in my case nevertheless all tutorials give configuration details either about torque or mpd (which doesn't exist in openmpi implementation). Could you give me some tips or links to appropriate manuals? Steps I've already completed: - openmpi installation - network configuration (computers see each other) - ssh password-less login to second computer I tried using machinefiles without further configuration and with just 2 IPs in it. But jobs don't seem to start at all after initialization part. (MPI seems to work because I'm able to scatter jobs on multiple cores of both computers without communication between them).

  Read the article

• How much does a IPtables router slow down a connection?

  - by RayQuang

  Hi, I would like to know if introducing a new gateway in my network will slow things down. The question may sound unclear but here is an illustration: Before Installing gateway server Main Router <=> switches <=> servers after installing gateway Server Main Router <=> IPtables router <=> switches <=> servers My question is. How much will this delay incoming outgoing requests / file transfers. thanks, RayQuang

  Read the article

• WAN and LAN setup for IPv6

  - by neu242

  We just got a IPv6 /48 range (a gateway and an IP address) for our company, but I'm unsure about how to set it up. We use FreeBSD 8.4 (pfSense 2.1) as a router/firewall. Currently we have IPv4 setup with a WAN towards the internet, and a NAT-ed LAN behind it for office PCs. We want to keep the LAN network for security, and we want IPv6 addresses from the /48 for all office PCs (without NAT). The WAN is configured with the IPv6 gateway 1111:2222:3333::1/48 and interface address 1111:2222:3333::2/48. But when it's configured this way, I guess it's impossible to fit the LAN on a /64 within the /48? I believe I should configure the WAN subnet on 1111:2222:3333:1::/64 and the LAN on a subnet like 1111:2222:3333:2::/64. Is this something I can configure myself, or do I have to ask the ISP to configure that routing for me?

  Read the article

• Create True VLAN over RAS

  - by Bigbohne

  Hi, I was wondering if it's possible. I want to create a virtual network over RAS using Windows Server 2003. The Client should be able to connect to the server using L2TP and should get an IP Adress from a private Range (lets say 192.168.1.100 - 192.168.1.200 and a subnetmask of 255.255.255.0). Now each client connected to the server should be able to ping another connected client. e.g. 192.168.1.123 <- 192.168.1.145 via RAS via the server. Is this possible? And ... how ? best regards, andre

  Read the article

• Unauthorized computer use via keyboard or remote access?

  - by brydaverambo

  I’m suspecting my computer is being used when I’m not at home. This is happening either physically or remotely. My wireless switch is off. Is there any way possible to detect and/or monitor activity without purchasing software? My settings are being changed as well as passwords (Bios PW was changed and I cannot access Bios settings). I connect via the network cable. Is it possible for someone (in range) to connect to my laptop even if the wireless switch is off? This is a Dell Inspiron 1720 with the WLAN 1395 card. Here’s the kicker. When I try to download freeware for monitoring activity, I am not allowed to do this! ????

  Read the article

• Hostname confusion (Ubuntu Server 10.04)

  - by letseatfood

  I have just setup Ubuntu 10.04 Server Edition. I have been following this tutorial. The DNS information seems to be setup correctly now, but I am confused about the hostname. Currently it is laughingbuddha.home. That is a name I created. Now, I am mainly not sure how to connect from another computer on my network. I basically want to be able to put PHP files on the server box and then test them via a web browser on my other computer. So, I think I digressed from my first question, but would somebody please help me figure out if the hostname is okay for doing what I need to do? Thank-you!

  Read the article

• Vim: How can I :cd to an sftp directory?

  - by ChrisInCambo

  Hi, I'm currently an emacs user, but thought I would come back and take another look at Vim for fun. My client machine is Ubuntu, and I frequently work on other ubuntu servers within my network, emacs and tramp is really nice in this regard, I can just connect to a file via sftp and then easily navigate to it's parents/children/sibling, just as if I was dealing with a file on the local file system. With Vim I can sftp to a file, but none of the navigation stuff works, when I use :e or fuzzy file search, vim still thinks I'm back on the client machine. If I try to :cd to the sftp directory I get an error. Is there anyway I can get the same file/folder navigation regardless of whether I'm looking at an sftp folder or a folder on my client machine? Cheers, Chrsi

  Read the article

• Windows clients cannot access machine running DHCP server

  - by science9712

  I'm trying to setup a small LAN, using an Ethernet switch, an Arch Linux server, and around 10 Windows XP machines. This network has no outside connections. The Arch machine has a self configured ip address (configured with ip addr add 192.168.0.1 dev eth0), and acts as a DHCP server(using dhcpd). This portion works great, windows clients get IP addresses, the correct gateway settings, perfect. However, the clients cannot connect to each other, or to the dhcp server. When I run ping 192.168.0.1 on any client, I get no response, same happens if I try to ping any other client. On the gateway machine, I can't ping any of the clients either. Any help would be much appreciated!

  Read the article

• Cannot connect to internet with Clearwire modem

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently. EDIT: I called Clear's tech support and apparently their network is having significant problems at the moment. Guess there's nothing an end-user can do about it.

  Read the article

• Prioritize file sharing performance in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• WIFI/LAN not working after Installing Ubuntu 13.10

  - by user183025

  I can't connect to my WIFI after installing Ubuntu 13.10. I tried re-installing it three times (thinking that I did something wrong during the installation) but I still can't connect to my WIFI. It just gives me the message that I'm offline and that I can't connect to my WIFI. I also tried connecting to the internet using LAN cable but with the same results. I tried google but it seems that there's no solution to this yet.... Anybody knows how to solve this? Thanks! FYI: H/W path Device Class Description ====================================================== system RC530/RC730 (To be filled by O.E.M.) /0 bus RC530/RC730 /0/0 memory 64KiB BIOS /0/4 processor Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz /0/4/5 memory 32KiB L1 cache /0/41 memory 4GiB System Memory /0/41/0 memory DIMM [empty] /0/41/1 memory 4GiB SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) /0/100 bridge 2nd Generation Core Processor Family DRAM Controller 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34) Subsystem: Intel Corporation Centrino Wireless-N 130 BGN Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06) Subsystem: Samsung Electronics Co Ltd Device c0c1 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at b000 [size=256] Memory at f2104000 (64-bit, prefetchable) [size=4K] Memory at f2100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

  Read the article

• Setting up a VPN tunnel between a Linux box and a Cisco FW

  - by Meni

  Hi. I have a linux box (ubuntu) and I have a service provider that will only allow an IPSEC tunnel connection between his network and my linux box. I have these details from the service provider: Service Provider: Peer IP – Lan on service provider's side - 10.10.10.10/24 Linux box details: Peer IP - Lan - Connection details: Phase1: Sha Aes 128 DH - group x Preshared – Lifetime – 24h Phase2: Sha Aes 128 Lifetime – 1h I am not sure which app I need to install on the linux box that will support this type of connection. Any ideas? Thanks!

  Read the article

• Nagios: Is it possible to have multiple IPs for a host?

  - by Aknosis

  In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

  Read the article

• Can't connect to IIS7 on one of my machines

  I have 2 computers, both running Win7 Professional x64. Computer "A" (192.168.0.10) is my work machine, it contains my tools etc. Computer "B" (192.168.0.15) is supposed to be my build server / web server for my projects I've installed IIS on "B", and installed IIS7 remote manager on "A". I'm trying to connect from A's IIS7 Manager to B's IIS but I fail. I have little knowledge of IIS, and I feel that's the main reason. I can ping B from A and get positive results so the machines do see each other. A and B are in the same workgroup but not in a domain (if that matters) - they're in my home network. What do I need to do to "see" B's IIS?

  Read the article

• Win Server 2008 R2 - Mapped shared folder hanging?

  - by M-Tech

  I have recently built a windows 2008 server R2 machine. This is purely for file server purposes and is very much a basic build. All windows updates installed and part of domain. I have setup a shared folder on the C:Drive and added permissions for domain users as co-owners. The client machines run XP SP3 and are part of the domain also. We have a few servers running the same setups on a few of our sites but this one is particular crashes users machines (explorer.exe hangs for at least a few mins) when attempting to access the shared folder. I have turned off the option on the network card for power save aswell still no change. Any help with this is very much appreciated and i look forward to hearing from you ;)

  Read the article

• Problem communicating with one machine in my domain

  - by pmaroun

  Context: 3 HyperV guest images (DC, SQL, MOSS) 1 internal network 1 domain (PJM.COM) DC: 192.168.0.192 SQL: 192.168.0.153 MOSS:192.168.0.160 I am having communication problems from/to the MOSS machine from the other two. I removed the MOSS machine from the domain and cannot rejoin. When I ping the MOSS machine from DC, I get the following response: Pinging MOSS [192.168.0.152] Reply from 192.168.0.192 Destination host unreachable (4 times) When I ping the MOSS machine from SQL, I get the following response: Pinging MOSS [192.168.0.152] Reply from 192.168.0.153 Destination host unreachable (4 times) From the MOSS machine, I can ping the server names, however I cannot ping the FQDN. When I ping from the DC and SQL machines, I get IPv4 addresses. When I ping from the MOSS machine, I get IPv6 addresses. I'm a developer and don't know what steps to take to resolve this issue. Please help!?

  Read the article

• Workaround for API limits [closed]

  - by blunders

  Problem: Planning on building out a client services company that requires access to APIs. Most APIs are limited based on user, IP, etc. - and even though the API calls would be on a per client basis, there's no way to get usage not tied to IPs. (Theoretical) Solution: Have each client install on their network a proxy/VPN that would allow my systems to connect and use their assigned usage. So, it's possible there's a better solution than the one I've thought of, but it's the only one I've been able to come up with.

  Read the article

• Best way to backup Active Directory with a single domain controller

  - by John Hall

  I have a domain with about 15 users and a single Windows Server 2008 domain controller. Some recent issues with my RAID controller have made me reconsider how I go about securing the AD data. Currently I run a System State Backup nightly. However, it seems that it is impossible (or at least difficult and unsupported) to restore that to any other machine than the one from which it was taken. Adding a second DC to the domain seems expensive and overkill for such a small network. Is there no other way to backup the AD data?

  Read the article

• syslog log of TCP packet

  - by com

  Occasionally, I noticed a lot of following messsages in syslog Nov {datetime} hostname kernel: [8226528.586232] AIF:PRIV TCP packet: IN=eth0 OUT= MAC={mac} SRC={sourceip} DST={destinationip} LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=20361 DF PROTO=TCP SPT=39950 DPT=37 WINDOW=14600 RES=0x00 SYN URGP=0 On the Internet, I found that DOS attack may cause such type of output, unfortunately, I don't understand what does this log mean. The only thing is clear for me is this log is related to network. The source host is the host where nagios is installed. Does it mean nagios somehow does behave well? And what does it mean at all?

  Read the article

• Oracle EZConnect in Mediawiki

  - by raindog308

  Mediawiki supports Oracle and I'm trying to configure it in the installer. The installers says you can use EZConnect...something like: user/pass@//server.example.com/dbname or since the installer has fields elsewhere for user/pass server.example.com/dbname The installer includes a link to the EZConnect docs: http://docs.oracle.com/cd/E11882_01/network.112/e10836/naming.htm. All the examples in that doc include a forward slash. But every combination I've tried results in an error like this: Invalid database TNS "sever.example.com/service_name". Use only ASCII letters (a-z, A-Z), numbers (0-9), underscores (_) and dots (.). I can't find any examples of EZConnect that don't include a forward slash. That error is from Mediawiki, not Oracle. I'm tailing the listener log and there is no connection made - Medaiwiki is returning an error without trying to connect. I'm using php OCI8 with the Oracle instant client. I don't have a tnsnames.ora setup for this client - which is kind of the point of EZConnect. I did write a test php script that connects via oci_connect just fine. Has anyone configured Mediawiki to use Oracle with EZConnect? If so, what did you use in the installer?

  Read the article

< Previous Page | 599 600 601 602 603 604 605 606 607 608 609 610  | Next Page >