Search Results

Search found 16353 results on 655 pages for 'custom maps'.

Page 604/655 | < Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >

  • BIND DNS server (Windows) - Unable to access my local domain from other computers on LAN

    - by Ricardo Saraiva
    I have a BIND DNS server running on my Windows 7 development machine and I'm serving pages with WAMPSERVER. My ideia is to develop some tools (in PHP) for my intranet at work and I want them to be accessible via LAN in this format: http://tools.mycompany.com I've already placed BIND and I can access http://tools.mycompany.com on the machine that holds BIND server, but I cannot access it from other LAN computers. I've done the following on my router: defined static IP's for all LAN computers set Port Forwarding to my server (remember: it serves DNS and Web pages) set DNS server configuration to point to my LAN server On LAN computers, I went to Local Area Network properties and also changed the DNS server IP in order to point to my local DNS server. If it helps, here is my named.conf file: options { directory "c:\windows\SysWOW64\dns\etc"; forwarders {127.0.0.1; 8.8.8.8; 8.8.4.4;}; pid-file "run\named.pid"; allow-transfer { none; }; recursion no; }; logging{ channel my_log{ file "log\named.log" versions 3 size 2m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ my_log; }; }; zone "mycompany.com" IN { type master; file "zones\db.mycompany.com.txt"; allow-transfer { none; }; }; key "rndc-key" { algorithm hmac-md5; secret "qfApxn0NxXiaacFHpI86Rg=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; ...and a single zone I've defined - file db.mycompany.com.txt: $TTL 6h @ IN SOA tools.mycompany.com. hostmaster.mycompany.com. ( 2014042601 10800 3600 604800 86400 ) @ NS tools.mycompany.com. tools IN A 192.168.1.4 www IN A 192.168.1.4 On the file above 192.168.1.4 is the IP of the local machine inside my LAN. Can someone help me here? I need my web pages to be accessible from other computers inside my LAN using my custom domain name. I've tried on other computers and they can access my server via http://192.168.1.4/, but no able when using http://tools.mycompany.com . Please, consider the following: I'm completely new to BIND I have basic knowledge in Apache configuration Thanks a lot for your help.

    Read the article

  • TFS2010 Hangs “Waiting for Build Agent”

    - by Qpirate
    I have asked this question over on SO the link to the question is here but i am hoping this is a better place to ask it. I have 3 VM's each running the TFS Build Host Service 1 has 1 controller and 1 agent 2 have 2 Build Agents each. Most of the time (7\10 builds) it comes back with the following error message TF215097: An error occurred while initializing a build for build definition BUILD_DEFINITION: There was no endpoint listening at http://MACHINE1:9191/Build/v3.0/Services/Controller/14 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. and there is no errors when i do get this message. the following is the config file that i have created <configuration> <appSettings> <add key="traceWriter" value="true"/> </appSettings> <system.diagnostics> <switches> <add name="BuildServiceTraceLevel" value="4"/> <add name="API" value="4"/> <add name="Authentication" value="4"/> <add name="Authorization" value="4"/> <add name="Database" value="4"/> <add name="General" value="4"/> <add name="traceLevel" value="4"/> </switches> <trace autoflush="true" indentsize="4"> <listeners> <add name="myListener" type="Microsoft.TeamFoundation.TeamFoundationTextWriterTraceListener,Microsoft.TeamFoundation.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" initializeData="c:\logs\TFSBuildServiceHost.exe.log" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> </configuration> I do have my own custom activities in my build process but this does not seem to be a problem as sometimes the build actually does go. I have tried refreshing the template as some sites suggest. Has anyone come across a solution for this problem? or can anyone tell me how to catch these errors when they happen?

    Read the article

  • Monitoring tools that can take high rate and high volume?

    - by Jon Watte
    We're using Cacti with RRDTool to monitor and graph about 100,000 counters spread across about 1,000 Linux-based nodes. However, our current setup generally only gives us 5-minute graphs (with some data being minute-based); we often make changes where seeing feedback in "near real time" would be of value. I'd like approximately a week of 5- or 10-second data, a year of 1-minute data, and 5 years of 10-minute data. I have SSD disks and a dual-hexa-core server to spare. I tried setting up a Graphite/carbon/whisper server, and had about 15 nodes pipe to it, but it only has "average" for the retention function when promoting to older buckets. This is almost useless -- I'd like min, max, average, standard deviation, and perhaps "total sum" and "number of samples" or perhaps "95th percentile" available. The developer claims there's a new back-end "in beta" that allows you to write your own function, but this appears to still only do 1:1 retention (when saving older data, you really want the statistics calculated into many streams from a single input. Also, "in beta" seems a little risky for this installation. If I'm wrong about this assumption, I'd be happy to be shown my error! I've heard Zabbix recommended, but it puts data into MySQL or some other SQL database. 100,000 counters on a 5 second interval means 20,000 tps, and while I have an SSD, I don't have an 8-way RAID-6 with battery backup cache, which I think I'd need for that to work out :-) Again, if that's actually something that's not a problem, I'd be happy to be shown the error of my ways. Also, can Zabbix do the single data stream - promote with statistics thing? Finally, Munin claims to have a new 2.0 coming out "in beta" right now, and it boasts custom retention plans. However, again, it's that "in beta" part -- has anyone used that for real, and at scale? How did it perform, if so? I'm almost thinking about using a graphing front-end (such as Graphite) and rolling my own retention backend with a simple layer on top of mmap() and some stats. That wouldn't be particularly hard, and would probably perform very well, letting the kernel figure out the balance between frequency of flushing to disk and process operations. Any other suggestions I should look into? Note: it has to have shown itself able to sustain the kinds of data loads I'm suggesting above; if you can point at the specific implementation you're referencing, so much the better!

    Read the article

  • Diff 2 files while ignoring parts of lines

    - by Millianz
    I would like to diff a file system. Currently my bash script prints out the file system recursively into a file (ls -l -R) and diffs it with an expected output. An example for a line in this file would be: drw---- 100000f3 00000400 0 ./foo/ My current diff command is diff "$TEMP_LOG" "$DIFF_FILE_OUT" --strip-trailing-cr --changed-group-format='%' --unchanged-group-format='' "$SubLog" As you can see I ignore additional lines in the current output file, I only care about lines that match with the master output. I now have the problem though that some files may differ in size, or a folder might even have a different name, but due to it's location I know what access rights it should have. For example: Output: ------- 00000000 00000000 528 ./foo/bar.txt Master: ------- 00000000 00000000 200 ./foo/bar.txt Only the size differs here, and it doesn't matter, I would like to just ignore certain parts of the diff, kind of like an ansi c comment. Master: ------- 00000000 00000000 /*200*/ ./foo/bar.txt -- OR -- Master: d------ 00000000 00000000 /*10*/ ./foo//*123123*///*76456546*//bar.txt Output: d------ 00000000 00000000 0 ./foo/asd/sdf/bar.txt And still have it diff correctly. Is this even possible with diff, or will I have to write a custom script for it? Since I'm fairly new to cygwin I might be using the completely wrong tool all together, I'm happy for any suggestions. Update: Taking a step back, here is the general task at hand that I want to achieve. I want to write a script that checks the file system to see if the read/write permissions are set up correctly. The structure of the file system is under my control, so I don't have to worry about it changing too much. Sometimes folders/files might not be present, but if they are their permissions must be checked. For Example assume that the following is a snapshot of the current file system structure drw ./foo drw ./foo/bar -rw ./foow/bar/bar.txt drw ./foo/baz -rw ./foo/baz/baz.txt And this is what the file system structure might dictate, i.e. if these folders / files are present, the permissions must match. drw ./foo drw ./foo/bar -rw ./foo/bar/bar.txt --- ./foo/bar/foobar.txt drw ./foo/baz -rw ./foo/baz/foobaz.txt In this case the file system checked out ok, since all files present match their expected values. The situation becomes more complicated as soon as certain folders might have any arbitrary name, only due to their location I know what their permissions should be. Assume that the directory ./foo/bar in the above example might be such a case, i.e. instead of bar the folder could have any name, but still match the -rw permissions. This seems like a very complicated situation, and I'm not even sure if I can solve it with bash scripting alone. I might have to write an actual application.

    Read the article

  • How to encrypt dual boot windows 7 and xp (bitlocker, truecrypt combo?) on sdd (recommended?)

    - by therobyouknow
    I would like to setup a dual boot Windows 7 and Windows XP laptop/notebook computer where each operation system's partition is fully encrypted. I would like to do this on a SSD - a 128Gb Crucial M4. My research Dual boot of truecrypt encrypted OSs on one drive (not possible - in Truecript 7.x at time of writing) This cannot be done on a standard Truecrypt setup - it will only support encrypting one of the operating systems. I have tried this and also read about it here on superuser.com However, I did see a solution here that uses grub4dos as the initial bootloader to chain to separate truecrypt encrypted OSs, in my case Windows 7 and Windows XP: http://yyzyyz.blogspot.co.uk/2010/06/truecrypt-how-to-encrypt-multiple.html I am not going to consider this solution as it relies upon some custom code for use in the bootloader that is provided by the author. I would prefer a solution that can be fully understood so that I can be sure that there is nothing undesirable occuring (i.e. malware or just simply bugs in the code). I would like to believe such a solution doesn't have those risks but I can't be sure. BitLocker and Truecrypt combination - possible solution? So I am now considering a combination of encryption programs: I now aim to encrypt Windows XP with Truecrypt and Windows 7 with BitLocker. Assuming Truecrypt bootloader can boot into non-Truecrypt OSs (e.g. via hitting Escape to go to another menu), then this solution may be viable. SSDs and Encryption (use fastest possible spinning hard disk instead (?)) I read on various superuser.com posts and elsewhere that current SSDs are not suited to whole drive encryption for various reasons: impact of performance algorithms that give SSDs advantage over spinning harddisks. Algorithms used in compression of data for example. Wear on the SSD, shortening its life Security issues whereby data is repeated, as indicated in some Truecrypt documentation So I am now considering not using SSD. But with the aim to have the fastest drive possible, I am considering using the Western Digital Scorpion black 2.5" 7200rpm harddisk as this appears to be top rated among spinning platter-based harddrives (don't work for Western Digital). Summary So to achieve whole drive encrypted dual boot Windows 7 and Windows XP with minimal performance impact I intend to use a combination of Truecrypt and Bitlocker on a top-rated conventional spinning platter-based harddisk. Questions Will my summary: achieve whole disk encryption of the dual-boot Windows XP, Windows 7? OR an you suggest a simpler solution, including one that only requires only Truecrypt (BitLocker not available on XP). Or another encryption tool, including paid-for? provide the highest performance. Am I correct to avoid using SDD with encryption for the reasons I discovered? Are the concerns about SSDs and encryption still very real (some articles I read go back to 2010) Thanks for your input!

    Read the article

  • Google analytics and multiple independent subdomains

    - by MTilsted
    I need some help trying to setup google analytics correct. Here is my setup: We host sites for multiple customers, and each customer have their own subdomain on our site. So we have customerA.oursite.com and customerB.oursite.com As we add more customers we get more subdomains. We do want to track all data for each customer independent, but I don't want to to create a new google tracking code for each new customer. So my plan is to track all visits with "oursite.com", and then I will create a filter in google Analytics to get data for each specific customer(All visits for a specific subdomain). Is this(One tracking code, and a subdomain filter) the right way to do it? To create a subdomain filter i add a new profile for each customer, and then add a custom filter saying include "Request URI" and fill in "CustomerDomain.oursite.com". Is this the correct way to do it? And a general question about filters: Is it really impossible to create a new filter by applying it to data in an existing profile? I would really like to just collect all the data in one "main" profile and then create subdomain filters as we need them. But it seems that google only apply filters to new incomming data, not existing data. Is this really true? The following is my tracking code. Is '_setDomainName','none' the right thing to do? <script type="text/javascript"> /* Tracking code for qrtown.com */ var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-11584298-10']); _gaq.push(['_setDomainName', 'none']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script>

    Read the article

  • Apache returns 403 Forbidden for alternative port vhost

    - by Wesley
    I'm having an issue getting vhosts to work on Apache 2.2, Debian 6. I have two VirtualHosts, one on port 80 and one on port 8888. The port 80 one has been created automatically by DirectAdmin, the 8888 is a custom one. It's configuration is as follows. <VirtualHost *:8888 > DocumentRoot /home/user/public_html/development ServerName www.myserver.nl ServerAlias myserver.nl <Directory "/home/user/public_html/development"> Options +Indexes +FollowSymLinks +MultiViews AllowOverride All Order Allow,deny Allow from all </Directory> </VirtualHost> Of course I also have a NameVirtualHost *:8888 The port 80 DocumentRoot is /home/user/public_html/production, which is perfectly accessible and works like a charm. The port 8888 docroot of /home/user/public_html/development is 403 forbidden though. I have compared the permissions for both folders. They seem fine to me. drwxr-xr-x 2 root root 4096 Aug 17 16:14 development drwxr-xr-x 4 root root 4096 Aug 18 04:29 production Also, the index.php file which is supposed to display when accessing through port 8888, located in /development/: -rwxr-xr-x 1 root root 41 Aug 17 16:14 index.html I have looked at my error_log and found many of the following entries, only being added to the log file when accessing through port 8888. [Sat Aug 18 04:35:09 2012] [error] [client 27.32.156.232] Symbolic link not allowed or link target not accessible: /home/user/public_html /home/user/public_html is a symbolic link that refers to /home/user/domains/mydomain/public_html. The symbolic link has the following permissions: lrwxrwxrwx 1 admin admin 29 Aug 17 15:56 public_html -> ./domains/mydomain/public_html I'm at a loss. It seems that everything is readable or executable. I've set the Directory to FollowSymLinks in the httpd.conf file, but that doesn't seem to make a difference. If I change that directory tag to <Directory "/home/admin/public_html"> (so it has FollowSymLinks on that as well) it still does not work. Any help is greatly appreciated. If I need to post more information, let me know. I'm pretty much a beginner at this stuff. .. .. UPDATE: I ended up changing the configuration to directly go to the actual path of the files, avoiding the public_html symlink altogether. That worked. Thanks for the suggestions folks. DocumentRoot /home/user/domains/mydomain/public_html/development instead of DocumentRoot /home/user/public_html/development

    Read the article

  • recommendations for efficient offsite remote backup solution of vm's

    - by senorsmile
    I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

    Read the article

  • VPN Connection Causes Internal LAN Connection Loss with Server

    - by sleepisfortheweak
    I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

    Read the article

  • How should we serve files in a small bioinformatics cluster?

    - by cespinoza
    We have a small cluster of six ubuntu servers. We run bioinformatics analyses on these clusters. Each analysis takes about 24 hours to complete, each core i7 server can handle 2 at a time, takes as input about 5GB data and outputs about 10-25GB of data. We run dozens of these a week. The software is a hodgepodge of custom perl scripts and 3rd party sequence alignment software written in C/C++. Currently, files are served from two of the compute nodes (yes, we're using compute nodes as file servers)-- each node has 5 1TB sata drives mounted separately (no raid) and is pooled via glusterfs 2.0.1. They each have as 3 bonded intel ethernet pci gigabit ethernet cards, attached to a d-link DGS-1224T switch ($300 24 port consumer-level). We are not currently using jumbo frames (not sure why, actually). The two file-serving compute nodes are then mirrored via glusterfs. Each of the four other nodes mounts the files via glusterfs. The files are all large (4gb+), and are stored as bare files (no database/etc) if that matters. As you can imagine, this is a bit of a mess that grew organically without forethought and we want to improve it now that we're running out of space. Our analyses are I/O intensive and it is a bottle neck-- we're only getting 140mB/sec between the two fileservers, maybe 50mb/sec from the clients (which only have single NICs). We have a flexible budget which I can probably get up $5k or so. How should we spend our budget? We need at least 10TB of storage fast enough to serve all nodes. How fast/big does the cpu/memory of such a file server have to be? Should we use NFS, ATA over Ethernet, iSCSI, Glusterfs, or something else? Should we buy two or more servers and create some sort of storage cluster, or is 1 server enough for such a small number of nodes? Should we invest in faster NICs (say, PCI-express cards with multiple connectors)? The switch? Should we use raid, if so, hardware or software? and which raid (5, 6, 10, etc)? Any ideas appreciated. We're biologists, not IT gurus.

    Read the article

  • How to flip video feed that's presented upside down?

    - by Zuul
    Skype an other applications running under windows 7 Ultimate are presenting the video captured from the laptop built-in webcam upside down. I've tried many solution that I was able to find regarding issues like this, but to no avail. Some of the most relevant are discussed here: From Skype Support Network, the thread why is my video image of myself upside-down??? From ASUSTek Forums, the thread Built-in camera upside down Both present several potential solutions to this issue, but I've been unable to fix it for the laptop ASUS U6S. What I've already tried: Changing Drivers The driver that works must be the one from Windows, all others available from ASUS drivers either don't install or install but the webcam doesn't provide any video feed. This disallows all options that concern using an older driver or editing the .inf file as to manually adjust the settings. ASUS does not provide drivers for Windows 7, so I've used drivers from Windows Vista 32 Bit. Using the application manycam This application actually solves the issue (temporarily), but creates new ones: If I use the application to flip the video feed, Skype video call cease to work. This application doesn't save the settings, at least I wasn't able to find any way to save the settings I've used to flip the video feed. A computer restart brings all back to how it was, video feed upside down and if the application is still installed, Skype continues to fail on video calls. Regedit I've searched thru Windows Registry Editor as to find any reference to the webcam settings, hopping to find a key with the Flip parameter, since it's up to the driver to flip the image (by what I could ascertain from this problem). Couldn't find any reference to such settings, either they actually don't exist within the Windows Registry or they use some weird name that I could think off. System Configuration I was able to access the webcam system settings from the Windows Device Manager, but the tab that actually has the Image Rotation setting is always disabled. The same goes for the settings available from the Skype webcam options (that essentially is presenting the same settings as Windows Device Manager, just within a custom Skype pop-up). Question: How can I flip the video feed from the laptop's built-in webcam, as to properly see and broadcast the video?

    Read the article

  • How does an NTP host switch among the various modes?

    - by James A. Rosen
    The NTPv3 RFC describes five operating modes: Symmetric Active (1): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer. Symmetric Passive (2): This type of association is ordinarily created upon arrival of a message from a peer operating in the symmetric active mode and persists only as long as the peer is reachable and operating at a stratum level less than or equal to the host; otherwise, the association is dissolved. However, the association will always persist until at least one message has been sent in reply. By operating in this mode the host announces its willingness to synchronize and be synchronized by the peer. Client (3): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of its peer. By operating in this mode the host, usually a LAN workstation, announces its willingness to be synchronized by, but not to synchronize the peer. Server (4): This type of association is ordinarily created upon arrival of a client request message and exists only in order to reply to that request, after which the association is dissolved. By operating in this mode the host, usually a LAN time server, announces its willingness to synchronize, but not to be synchronized by the peer. Broadcast (5): A host operating in this mode sends periodic messages regardless of the reachability state or stratum of the peers. By operating in this mode the host, usually a LAN time server operating on a high-speed broadcast medium, announces its willingness to synchronize all of the peers, but not to be synchronized by any of them. It seems to me, though, that any host except a leaf node would probably be in several modes. For example, I might have a local area network with three NTP servers, each in Symmetric Active (1) mode with respect to one another. They would also each be clients (3) of one of the many public stratum two time servers. Lastly, they would all server as servers (4) to the many local clients. Is the point that they're only in a given mode for a moment during the synchronization? If so, how does a host know to switch? I'm only looking for enough depth here to discuss the issue in an educated manner, not to write a custom time server.

    Read the article

  • Why would a process monitoring script use exit 1; on finding no problems?

    - by user568458
    General question: On a Linux (Centos) server, if a process monitoring script run by cron is set to close with exit 1; rather than exit 0; on finding that everything is okay and that no action is needed, is that a mistake? Or are there legitimate reasons for calling exit 1; instead of exit 0; on the "Everything's fine, no action needed" condition? exit 0; on finding no problems seems to me to be more appropriate. But maybe there's something I'm not aware of. For example, maybe there's something specific to Cron? Or maybe there's a convention in process monitoring scripts that 'failure' means 'this script failed to need to fix a problem' (rather than what I would expect which is that exit 1; would mean 'the process being monitored has failed'?) My specific case: I'm looking at a process monitoring script written by my web hosting company. By process monitoring script, I mean a script executed by Cron on a regular basis that checks if an important system process is running, and if it isn't running, takes actions such as mailing an administrator or restarting the process. Here's the (generalised) structure of their script, for a service running on port 8080 (in this case, Apache Tomcat): SERVICE=$(/usr/sbin/lsof -i tcp:8080 | wc -l); if [ $SERVICE != 0 ]; then exit 1; else #take action fi Seems simple enough even for someone with limited knowledge like me, except the exit 1; part seems odd. As I understand it, exit 0; closes a program and signifies to the parent that executed the program that everything is fine, exit n; where n0 and n<127 signifies that there has been some kind of error or problem. Here, their script seems to go against that rule - it calls exit 1; in the condition where everything is fine, and doesn't exit after taking remedial action in the problem condition. To me, this looks like a mistake - but my experience in this area is limited. Are there cases where calling exit 1; in the "Everything's fine, no action needed" condition is more appropriate than calling exit 0;? Or is it a mistake? Wider context is pretty simple. It's a Centos VPS, running Plesk. The script is being called by Cron via Plesk's "Scheduled tasks" Cron manager. There's no custom layer between Cron and this script that would respond in an unusual way to the exit call. It's a fairly average, almost out-of-the box Plesk-managed Centos VPS (in so far as there is such a thing). The process being monitored by this script is Apache Tomcat.

    Read the article

  • Tips for maximizing Nginx requests/sec?

    - by linkedlinked
    I'm building an analytics package, and project requirements state that I need to support 1 billion hits per day. Yep, "billion". In other words, no less than 12,000 hits per second sustained, and preferably some room to burst. I know I'll need multiple servers for this, but I'm trying to get maximum performance out of each node before "throwing more hardware at it". Right now, I have the hits-tracking portion completed, and well optimized. I pretty much just save the requests straight into Redis (for later processing with Hadoop). The application is Python/Django with a gunicorn for the gateway. My 2GB Ubuntu 10.04 Rackspace server (not a production machine) can serve about 1200 static files per second (benchmarked using Apache AB against a single static asset). To compare, if I swap out the static file link with my tracking link, I still get about 600 requests per second -- I think this means my tracker is well optimized, because it's only a factor of 2 slower than serving static assets. However, when I benchmark with millions of hits, I notice a few things -- No disk usage -- this is expected, because I've turned off all Nginx logs, and my custom code doesn't do anything but save the request details into Redis. Non-constant memory usage -- Presumably due to Redis' memory managing, my memory usage will gradually climb up and then drop back down, but it's never once been my bottleneck. System load hovers around 2-4, the system is still responsive during even my heaviest benchmarks, and I can still manually view http://mysite.com/tracking/pixel with little visible delay while my (other) server performs 600 requests per second. If I run a short test, say 50,000 hits (takes about 2m), I get a steady, reliable 600 requests per second. If I run a longer test (tried up to 3.5m so far), my r/s degrades to about 250. My questions -- a. Does it look like I'm maxing out this server yet? Is 1,200/s static files nginx performance comparable to what others have experienced? b. Are there common nginx tunings for such high-volume applications? I have worker threads set to 64, and gunicorn worker threads set to 8, but tweaking these values doesn't seem to help or harm me much. c. Are there any linux-level settings that could be limiting my incoming connections? d. What could cause my performance to degrade to 250r/s on long-running tests? Again, the memory is not maxing out during these tests, and HDD use is nil. Thanks in advance, all :)

    Read the article

  • Remote Debian System Preventing Logon

    - by choobablue
    I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

    Read the article

  • Parsing GeoRSS Feed with jQuery

    - by senfo
    I'm attempting to use the jQuery jFeed plugin for parsing an Atom, GeoRSS feed and I'm running into issues extracting the information I need. For example, I need to extract the summary element and I would like to render the contents in a div on my HTML page. Additionally, I'd like to extract the contents from the georss:point elements and pass them into Google Maps to render them as points on a map. The problem is that it seems jFeed is stripping out the GeoRSS-related information. For example, I can extract the title element without issues, but it seems it doesn't extract the summary or georss:point elements, at all. Following is a snippet of the XML I'm working with: <feed xmlns="http://www.w3.org/2005/Atom" xmlns:georss="http://www.georss.org/georss"> <title>Search Results from DataWarehouse.HRSA.gov</title> <link rel="self" href="http://datawarehouse.hrsa.gov/HGDWDataWebService/HGDWDataService.aspx?service=HC&zip=20002&radius=10"/> <link rel="alternate" href="http://datawarehouse.hrsa.gov/"/> <author> <name>HRSA Geospatial Data Warehouse</name> </author> <id>tag:datawarehouse.hrsa.gov,2010-04-05:/</id> <updated>2010-04-05T19:25:28-05:00</updated> <entry> <title>Christ House</title> <link href="http://www.christhouse.org" /> <id>tag:datawarehouse.hrsa.gov,2010-04-05:/D388C4C6-FFA4-4091-819B-64D67DC64931</id> <summary type="xhtml"> <div xmlns="http://www.w3.org/1999/xhtml"> <div class="vcard"> <div class="fn org">Christ House</div> <div class="adr"> <div class="street-address">1717 Columbia Rd. N.W.</div> <span class="locality">Washington</span>, <span class="region">District of Columbia</span>, <span class="postal-code">20009-2803</span> </div> <div class="tel">202-328-1100</div> </div> <div> Categories: <span class="category">Service Delivery Site</span> </div> </div> </summary> <georss:point>38.9243636363636 -77.0395636363637</georss:point> <updated>2010-04-04T00:00:00-05:00</updated> </entry> </feed> Following is the jQuery code that I'm using: $(document).ready(function() { $.getFeed({ //url: 'http://datawarehouse.hrsa.gov/HGDWDataWebService/HGDWDataService.aspx?service=HC&zip=20002&radius=10', url: 'test.xml', success: function(feed) { $.each(feed.items, function(index, value) { $('#rssContent').append(value.title); // Set breakpoint here }); } }); }); I set a breakpoint on the line that appends to the rssContent div and noticed the objects in feed.items don't have the properties I'm after. Am I doing something wrong or was jFeed simply not designed to work the way I want it to?

    Read the article

  • Android: get current location from best available provider

    - by AP257
    Hi all, I have some Android code that needs to get the best available location QUICKLY, from GPS, network or whatever is available. Accuracy is less important than speed. Getting the best available location is surely a really standard task. Yet I can't find any code to demonstrate it. The Android location code expects you to specify criteria, register for updates, and wait - which is fine if you have detailed criteria and don't mind waiting around. But my app needs to work a bit more like the Maps app does when it first locates you - work from any available provider, and just check the location isn't wildly out of date or null. I've attempted to roll my own code to do this, but am having problems. (It's inside an IntentService where an upload happens, if that makes any difference. I've included all the code for info.) What's wrong with this code? @Override protected void onHandleIntent(Intent arg0) { testProviders(); doUpload(); } private boolean doUpload() { int j = 0; // check if we have accurate location data yet - wait up to 30 seconds while (j < 30) { if ((latString == "") || (lonString == "")) { Log.d(LOG_TAG, "latlng null"); Thread.sleep(1000); j++; } else { Log.d(LOG_TAG, "found lat " + latString + " and lon " + lonString); break; } //do the upload here anyway, with or without location data //[code removed for brevity] } public boolean testProviders() { Log.e(LOG_TAG, "testProviders"); String location_context = Context.LOCATION_SERVICE; locationmanager = (LocationManager) getSystemService(location_context); List<String> providers = locationmanager.getProviders(true); for (String provider : providers) { Log.e(LOG_TAG, "registering provider " + provider); listener = new LocationListener() { public void onLocationChanged(Location location) { // keep checking the location - until we have // what we need //if (!checkLoc(location)) { Log.e(LOG_TAG, "onLocationChanged"); locationDetermined = checkLoc(location); //} } public void onProviderDisabled(String provider) { } public void onProviderEnabled(String provider) { } public void onStatusChanged(String provider, int status, Bundle extras) { } }; locationmanager.requestLocationUpdates(provider, 0, 0, listener); } Log.e(LOG_TAG, "getting updates"); return true; } private boolean checkLoc(Location location) { float tempAccuracy = location.getAccuracy(); int locAccuracy = (int) tempAccuracy; Log.d(LOG_TAG, "locAccuracy = " + locAccuracy); if ((locAccuracy != 0) && (locAccuracy < LOCATION_ACCURACY)) { latitude = location.getLatitude(); longitude = location.getLongitude(); latString = latitude.toString(); lonString = longitude.toString(); return true; } return false; } public void removeListeners() { // Log.e(LOG_TAG, "removeListeners"); if ((locationmanager != null) && (listener != null)) { locationmanager.removeUpdates(listener); } locationmanager = null; // Log.d(LOG_TAG, "Removed " + listener.toString()); } @Override public void onDestroy() { super.onDestroy(); removeListeners(); } Unfortunately, this finds the network provider, but only ever outputs latlng null 30 times - it never seems to get a location at all. I never even get a log statement of locationChanged. It's funny, because from ddms I can see output like: NetworkLocationProvider: onCellLocationChanged [305,8580] NetworkLocationProvider: getNetworkLocation(): returning cache location with accuracy 75.0 seeming to suggest that the network provider does have some location info after all, I'm just not getting at it. Can anyone help? I think working example code would be a useful resource for the Android/StackOverflow community.

    Read the article

  • Spring 3 simple extentionless url mappings with annotation-based mapping - impossible?

    - by caerphilly
    Hi, I'm using Spring 3, and trying to set up a simple web-app using annotations to define controller mappings. This seems to be incredibly difficult without peppering all the urls with *.form or *.do Because part of the site needs to be password protected, these urls are all under /secure. There is a <security-constraint> in the web.xml protecting everything under that root. I want to map all the Spring controllers to /secure/app/. Example URLs would be: /secure/app/landingpage /secure/app/edit/customer/{id} each of which I would handle with an appropriate jsp/xml/whatever. So, in web.xml I have this: <servlet> <servlet-name>dispatcher</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>dispatcher</servlet-name> <url-pattern>/secure/app/*</url-pattern> </servlet-mapping> And in despatcher-servlet.xml I have this: <context:component-scan base-package="controller" /> In the Controller package I have a controller class: package controller; import org.springframework.stereotype.Controller; import org.springframework.web.bind.annotation.RequestMapping; import org.springframework.web.bind.annotation.RequestMethod; import org.springframework.web.servlet.ModelAndView; import javax.servlet.http.HttpServletRequest; @Controller @RequestMapping("/secure/app/main") public class HomePageController { public HomePageController() { } @RequestMapping(method = RequestMethod.GET) public ModelAndView getPage(HttpServletRequest request) { ModelAndView mav = new ModelAndView(); mav.setViewName("main"); return mav; } } Under /WEB-INF/jsp I have a "main.jsp", and a suitable view resolver set up to point to this. I had things working when mapping the despatcher using *.form, but can't get anything working using the above code. When Spring starts up it appears to map everything correctly: 13:22:36,762 INFO main annotation.DefaultAnnotationHandlerMapping:399 - Mapped URL path [/secure/app/main] onto handler [controller.HomePageController@2a8ab08f] I also noticed this line, which looked suspicious: 13:25:49,578 DEBUG main servlet.DispatcherServlet:443 - No HandlerMappings found in servlet 'dispatcher': using default And at run time any attempt to view /secure/app/main just returns a 404 error in Tomcat, with this log output: 13:25:53,382 DEBUG http-8080-1 servlet.DispatcherServlet:842 - DispatcherServlet with name 'dispatcher' determining Last-Modified value for [/secure/app/main] 13:25:53,383 DEBUG http-8080-1 servlet.DispatcherServlet:850 - No handler found in getLastModified 13:25:53,390 DEBUG http-8080-1 servlet.DispatcherServlet:690 - DispatcherServlet with name 'dispatcher' processing GET request for [/secure/app/main] 13:25:53,393 WARN http-8080-1 servlet.PageNotFound:962 - No mapping found for HTTP request with URI [/secure/app/main] in DispatcherServlet with name 'dispatcher' 13:25:53,393 DEBUG http-8080-1 servlet.DispatcherServlet:677 - Successfully completed request So... Spring maps a URL, and then "forgets" about that mapping a second later? What is going on? Thanks.

    Read the article

  • Invoice Discount: Negative line items vs Internal properties

    - by FreshCode
    Should discount on invoice items and entire invoices be negative line items or separate properties of an invoice? In a similar question, Should I incorporate list of fees/discounts into an order class or have them be itemlines, the asker focuses more on orders than invoices (which is a slightly different business entity). Discount is proposed to be separate from order items since it is not equivalent to a fee or product and may have different reporting requirements. Hence, discount should not simply be a negative line item. Previously I have successfully used negative line items to clearly indicate and calculate discount, but this feels inflexible and inaccurate from a business perspective. Now I am opting to add discount to each line item, along with an invoice-wide discount. Is this the right way to do it? Should each item have its own discount amount and percentage? Domain Model Code Sample This is what my domain model, which maps to an SQL repository, looks like: public class Invoice { public int ID { get; set; } public Guid JobID { get; set; } public string InvoiceNumber { get; set; } public Guid UserId { get; set; } // user who created it public DateTime Date { get; set; } public decimal DiscountPercent { get; set; } // all lines discount %? public decimal DiscountAmount { get; set; } // all lines discount $? public LazyList<InvoiceLine> InvoiceLines { get; set; } public LazyList<Payment> Payments { get; set; } // for payments received public boolean IsVoided { get; set; } // Invoices are immutable. // To change: void -> new invoice. public decimal Total { get { return (1.0M - DiscountPercent) * InvoiceLines.Sum(i => i.LineTotal) - DiscountAmount; } } } public class InvoiceLine { public int ID { get; set; } public int InvoiceID { get; set; } public string Title { get; set; } public decimal Quantity { get; set; } public decimal LineItemPrice { get; set; } public decimal DiscountPercent { get; set; } // line discount %? public decimal DiscountAmount { get; set; } // line discount amount? public decimal LineTotal { get { return (1.0M - DiscountPercent) * (this.Quantity * (this.LineItemPrice)) - DiscountAmount; } } }

    Read the article

  • Can't access a map member from a pointer

    - by fjfnaranjo
    Hi. That's my first question :) I'm storing the configuration of my program in a Group->Key->Value form, like the old INIs. I'm storing the information in a pair of structures. First one, I'm using a std::map with string+ptr for the groups info (the group name in the string key). The second std::map value is a pointer to the sencond structure, a std::list of std::maps, with the finish Key->Value pairs. The Key-Value pairs structure is created dynamically, so the config structure is: std::map< std::string , std::list< std::map<std::string,std::string> >* > lv1; Well, I'm trying to implement two methods to check the existence of data in the internal config. The first one, check the existence of a group in the structure: bool isConfigLv1(std::string); bool ConfigManager::isConfigLv1(std::string s) { return !(lv1.find(s)==lv1.end()); } The second method, is making me crazy... It check the existence for a key inside a group. bool isConfigLv2(std::string,std::string); bool ConfigManager::isConfigLv2(std::string s,std::string d) { if(!isConfigLv1(s)) return false; std::map< std::string , std::list< std::map<std::string,std::string> >* >::iterator it; std::list< std::map<std::string,std::string> >* keyValue; std::list< std::map<std::string,std::string> >::iterator keyValueIt; it = lv1.find(s); keyValue = (*it).second; for ( keyValueIt = keyValue->begin() ; keyValueIt != keyValue->end() ; keyValueIt++ ) if(!((*keyValueIt).second.find(d)==(*keyValueIt).second.end())) return true; return false; } I don't understand what is wrong. The compiler says: ConfigManager.cpp||In member function ‘bool ConfigManager::isConfigLv2(std::string, std::string)’:| ConfigManager.cpp|(line over return true)|error: ‘class std::map<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::less<std::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::allocator<std::pair<const std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >’ has no member named ‘second’| But it has to have the second member, because it's a map iterator... Any suggestion about what's happening? Sorry for my English :P, and consider I'm doing it as a exercise, I know there are a lot of cool configuration managers.

    Read the article

  • Can't run my servlet from tomcat server even though the classes are in package

    - by Mido
    Hi there, i am trying to get my servlet to run, i have been searching for 2 days and trying every possible solution and no luck. The servet class is in the appropriate folder (i.e under the package name). I also added the jar files needed in my servlet into lib folder. the web.xml file maps the url and defines the servlet. So i did everything in the documentation and wt people said in here and still getting this error : type Exception report message description The server encountered an internal error () that prevented it from fulfilling this request. exception javax.servlet.ServletException: Error instantiating servlet class assign1a.RPCServlet org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:108) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:558) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:379) org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:282) org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:357) org.apache.tomcat.util.net.AprEndpoint$SocketProcessor.run(AprEndpoint.java:1687) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) java.lang.Thread.run(Thread.java:619) root cause java.lang.NoClassDefFoundError: assign1a/RPCServlet (wrong name: server/RPCServlet) java.lang.ClassLoader.defineClass1(Native Method) java.lang.ClassLoader.defineClassCond(ClassLoader.java:632) java.lang.ClassLoader.defineClass(ClassLoader.java:616) java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141) org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:2820) org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:1143) org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1638) org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1516) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:108) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:558) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:379) org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:282) org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:357) org.apache.tomcat.util.net.AprEndpoint$SocketProcessor.run(AprEndpoint.java:1687) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) java.lang.Thread.run(Thread.java:619) note The full stack trace of the root cause is available in the Apache Tomcat/7.0.5 logs. Also here is my servlet code : package assign1a; import java.io.IOException; import java.util.logging.Level; import java.util.logging.Logger; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import lib.jsonrpc.RPCService; public class RPCServlet extends HttpServlet { /** * */ private static final long serialVersionUID = -5274024331393844879L; private static final Logger log = Logger.getLogger(RPCServlet.class.getName()); protected RPCService service = new ServiceImpl(); public void doGet(HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException { response.setContentType("text/html"); response.getWriter().write("rpc service " + service.getServiceName() + " is running..."); } public void doPost(HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException { try { service.dispatch(request, response); } catch (Throwable t) { log.log(Level.WARNING, t.getMessage(), t); } } } Please help me :) Thanks. EDIT: here are the contents of my web.xml file <web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd" version="3.0" metadata-complete="true"> <servlet> <servlet-name>jsonrpc</servlet-name> <servlet-class>assign1a.RPCServlet</servlet-class> </servlet> <servlet-mapping> <servlet-name>jsonrpc</servlet-name> <url-pattern>/rpc</url-pattern> </servlet-mapping> </web-app>

    Read the article

  • Xcode/iPhone Development 6 months in - Annoyances

    - by clearbrian
    Hi I've been iPhone programming for 6 months and come from a PC/Java/Eclipse background and still have a few annoyances with Xcode/iPhone programming I wonder are there any shortcuts to. Is there any way to prevent multiple windows opening all the time in XCode? a) When you click on the Errors/Warnings in the bottom right of the status bar build errors are shown in separate window. Any way to get these to show in the main editor? b) Anyway to get debugger to appear in main editor. I have a big screen iMac and it's still window hell on Macs. When you come from Alt-Tab the Mac is a nightmare. 2) Anyway to get a toolbar item on the main editor to: a) Open Console (I know CMD-thingy-R) b) Open Break points (you have to open Debugger first then breakpoints) I know there's keyboard shortcuts but I have only left hand free others on the trackball so any keys on right hand side of keyboard are too far. I know you can add Finder toolbar scripts (just wondering if anyway to extend Xcode). Are there utilities to extend Xcode? Scripts/Automator/Any Services I can setup to help. Can you automate Xcode like you can with Windows/ActiveX/VBA 3) Limit lookups using CMD + double click. If I double click on a variable to find its definition using CMD + double click it shows every occurrence of all variables with that name. (annoying it you name all you maps mapView) Anyway to get it to limit to the current class or at least order so current class is first. 4) Find doesn't seem to loop backwards if result all above cursor position I'm in a class and I hit CMD + F for find. Find box appears. I enter some text hit return. It says I have x matches but only back arrow is highlight in Find But when I hit < it does nothing. I need to scroll to the top and redo the search. If the text is both forwards and backwards then both < are highlighted and it works. is this a bug or a 'feature' Missing Eclipse features I have been looking at the User Script menu but was wondering how powerful they are? 5) any scripts around to generate source from members such as description: @property @synthesize if I add a new member, run a script will generate @property/@syntesize and release in dealloc 7) any good sites for scripts? SCM Im having problems with SCM and Folders on HD under project Classes directory. You get a library e.g. JSON. It usually comes as a folder. You copy it to the /Classes for your project. /Classes/JSON I create a Group for the Library in Xcode under Classes group. Classes JSON I drag the files from the folder into xcode into the JSON Group. I add them to the SCM and icon changes from ? to A but if I try and commit them it say folder /JSON is not under SCM. Can you drag a folder into Xcode so that it AND its files get included in SCM? Anyway to stop Xcode Help from being on top all the time. I keep feeling like punching it and telling it to get out of the way! :) I dont mind it open just not in the way once I've finished. Yes I know I can Ctrl-W Sites: the main site I use to learn Obj-C are : stackoverflow.com Google code Search - tonnes of full apps on here http://www.iphonedevsdk.com/forum/iphone-sdk-development/ Apple Developers Forums (anyway to get RSS feed to these or is that blasphemy :) ) Safari - 100s of IT book though prob too many to keep up :) any others? Any site that gives simple examples for Obj-C/ UIKit The docs just show the methods but actual examples (Google code search has helped a lot here)

    Read the article

  • WCF: Configuring Known Types

    - by jerbersoft
    I want to know as to how to configure known types in WCF. For example, I have a Person class and an Employee class. The Employee class is a sublass of the Person class. Both class are marked with a [DataContract] attribute. I dont want to hardcode the known type of a class, like putting a [ServiceKnownType(typeof(Employee))] at the Person class so that WCF will know that Employee is a subclass of Person. Now, I added to the host's App.config the following XML configuration: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.runtime.serialization> <dataContractSerializer> <declaredTypes> <add type="Person, WCFWithNoLibrary, Version=1.0.0.0,Culture=neutral,PublicKeyToken=null"> <knownType type="Employee, WCFWithNoLibrary, Version=1.0.0.0,Culture=neutral, PublicKeyToken=null" /> </add> </declaredTypes> </dataContractSerializer> </system.runtime.serialization> <system.serviceModel> ....... </system.serviceModel> </configuration> I compiled it, run the host, added a service reference at the client and added some code and run the client. But an error occured: The formatter threw an exception while trying to deserialize the message: There was an error while trying to deserialize parameter http://www.herbertsabanal.net:person. The InnerException message was 'Error in line 1 position 247. Element 'http://www.herbertsabanal.net:person' contains data of the 'http://www.herbertsabanal.net/Data:Employee' data contract. The deserializer has no knowledge of any type that maps to this contract. Add the type corresponding to 'Employee' to the list of known types - for example, by using the KnownTypeAttribute attribute or by adding it to the list of known types passed to DataContractSerializer.'. Please see InnerException for more details. Below are the data contracts: [DataContract(Namespace="http://www.herbertsabanal.net/Data", Name="Person")] class Person { string _name; int _age; [DataMember(Name="Name", Order=0)] public string Name { get { return _name; } set { _name = value; } } [DataMember(Name="Age", Order=1)] public int Age { get { return _age; } set { _age = value; } } } [DataContract(Namespace="http://www.herbertsabanal.net/Data", Name="Employee")] class Employee : Person { string _id; [DataMember] public string ID { get { return _id; } set { _id = value; } } } Btw, I didn't use class libraries (WCF class libraries or non-WCF class libraries) for my service. I just plain coded it in the host project. I guess there must be a problem at the config file (please see config file above). Or I must be missing something. Any help would be pretty much appreciated.

    Read the article

  • Invalid assignment left hand side

    - by JoelM
    I'm getting an invalid assignment left hand side. What I'm trying to do is, to use jscolor http://jscolor.com to define the color of polygons im drawing via Mapbender http://mapbender.org. What I do: Select a polygon by clicking on it, then open the options dialog (seperate window) where I have several options including the color. MyCode: if (isTransactional) {str += "\t\t<tr>\n"; var options = ["insert", "update", "delete", "abort", "pick"]; for (var i = 0 ; i < options.length ; i++) { var onClickText = "this.disabled=true;var result = window.opener.formCorrect(document, '"+featureTypeElementFormId+"');"; onClickText += "if (result.isCorrect) {"; onClickText += "window.opener.dbGeom('"+options[i]+"', "+memberIndex+"); "; // onClickText += "window.close();"; onClickText += "}"; onClickText += "else {"; onClickText += "alert(result.errorMessage);this.disabled=false;" onClickText += "}"; if (options[i] == "insert" && hasGeometryColumn && (!fid || showSaveButtonForExistingGeometries)) { str += "\t\t\t<td><input type='button' name='saveButton' value='"+msgObj.buttonLabelSaveGeometry+"' onclick=\""+onClickText+"\" /></td>\n"; } if (!featureTypeMismatch && fid) { if (options[i] == "update" && hasGeometryColumn) { str += "\t\t\t<td><input type='button' name='updateButton' value='"+msgObj.buttonLabelUpdateGeometry+"' onclick=\""+onClickText+"\"/></td>\n"; } if (options[i] == "delete"){ var deleteOnClickText = "var deltrans = confirm('"+msgObj.messageConfirmDeleteGeomFromDb+"');"; deleteOnClickText += "if (deltrans){"; deleteOnClickText += onClickText + "}"; str += "\t\t\t<td><input type='button' name='deleteButton' value='"+msgObj.buttonLabelDeleteGeometry+"' onclick=\""+deleteOnClickText+"\"/></td>\n"; }} if (options[i] == "abort") { str += "\t\t\t<td><input type='button' name='abortButton' value='"+msgObj.buttonLabelAbort+"' onclick=\"window.close();\" /></td>\n"; } if (options[i] == "pick") { var color; str += "<td><input class='color' name='color' id='cPick' onchange="+color+"></td>"; str += "<td><input type='text' id='text' value="+color+"></td>"; //color = document.getElementById('cPick').value; //var color2 = color; //alert(color2); } }str += "\t\t</tr>\n";}str += "\t</table>\n";str += "<input type='hidden' id='fid' value='"+fid+"'>"; //str += "<input type='text' name='mb_wfs_conf'>"; str += "</form>\n";}return str;} The Application: It is a Mapbender application to display maps and draw on it. You can draw points, lines and polygons also merge and split them. You can also select the polygons that you have drawn to alter them. Using: PHP, JavaScript, HTML, CSS, Mapbender, jQuery, Geoserver, PostgreSQL, WMS, WFS-T Sorry guys, but I think I'm wasting your time. Will ask this question in GIS specified Q&A. Thank you for the input. Greetings Joël

    Read the article

  • Smart auto detect and replace URLs with anchor tags

    - by Robert Koritnik
    I've written a regular expression that automatically detects URLs in free text that users enter. This is not such a simple task as it may seem at first. Jeff Atwood writes about it in his post. His regular expression works, but needs extra code after detection is done. I've managed to write a regular expression that does everything in a single go. This is how it looks like (I've broken it down into separate lines to make it more understandable what it does): 1 (?<outer>\()? 2 (?<scheme>http(?<secure>s)?://)? 3 (?<url> 4 (?(scheme) 5 (?:www\.)? 6 | 7 www\. 8 ) 9 [a-z0-9] 10 (?(outer) 11 [-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+(?=\)) 12 | 13 [-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+ 14 ) 15 ) 16 (?<ending>(?(outer)\))) As you may see, I'm using named capture groups (used later in Regex.Replace()) and I've also included some local characters (cšžcd), that allow our localised URL to be parsed as well. You can easily omit them if you'd like. Anyway. Here's what it does (referring to line numbers): 1 - detects if URL starts with open braces (is contained inside braces) and stores it in "outer" named capture group 2 - checks if it starts with URL scheme also detecting whether scheme is SSL or not 3 - starts parsing URL itself (will store it in "url" named capture group) 4-8 - if statement that says: if "sheme" was present then www. part is optional, otherwise mandatory for a string to be a link (so this regular expression detects all strings that start with either http or www) 9 - first character after http:// or www. should be either a letter or a number (this can be extended if you would like to cover even more links, but I've decided to omit other characters because I can't remember a link that would start with some other character 10-14 - if statement that says: if "outer" (braces) was present capture everything up to the last closing braces otherwise capture all 15 - closes the named capture group for URL 16 - if open braces was present, capture closing braces as well and store it in "ending" named capture group First and last line used to have \s* in them as well, so user could also write open braces and put a space inside before pasting link. Anyway. My code that does link replacement with actual anchor HTML elements looks exactly like this: value = Regex.Replace( value, @"(?<outer>\()?(?<scheme>http(?<secure>s)?://)?(?<url>(?(scheme)(?:www\.)?|www\.)[a-z0-9](?(outer)[-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+(?=\))|[-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+))(?<ending>(?(outer)\)))", "${outer}<a href=\"http${secure}://${url}\">http${secure}://${url}</a>${ending}", RegexOptions.Compiled | RegexOptions.CultureInvariant | RegexOptions.IgnoreCase); As you can see I'm using named capture groups to replace link with an Anchor tag: ${outer}<a href=\"http${secure}://${url}\">http${secure}://${url}</a>${ending} I could as well omit the http(s) part in anchor display to make links look friendlier, but for now I decided not to. Question I would like for my links to be replaced with shortenings as well. So when user copies a very long links (for instance if they would copy a link from google maps that usually generates long links I would like to shorten the visible part of the anchor tag. Link would work, but visible part of an anchor tag would be shortened to some number of characters. Does the replace string support notations like that so I can stil use a singe Regex.Replace() call?

    Read the article

< Previous Page | 600 601 602 603 604 605 606 607 608 609 610 611  | Next Page >