Search Results

Search found 17749 results on 710 pages for 'connection pool'.

Page 605/710 | < Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >

• How to connect 2 routers (Asmax and D-link)

  - by piobyz

  I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• XP/Intel wirelss only showing 'hpsetup' ad-hoc network that isn't there

  - by ewall

  Trying to help my friend with her work XP laptop, which recently stopped seeing any wireless SSIDs except the SSID 'hpsetup' (presumably from a wireless-enabled HP printer). Relevant information: The laptop is a Lenovo T500 (Centrino 2 chipset) with XP SP3. The network adapter is Intel WiFi Link 5300 AGN (built-in). The latest version (13.5) of the Intel drivers only are installed, not the Intel config software, so XP is using the Wireless Zero-Config manager. The wireless router is a NetGear WGR614 v7 with 802.11b/g. The SSID is broadcasting, and all the other laptops in the house can see and connect to it. On the laptop, I have tried repairing the network connection, disabling power management, turning off 802.11a & n radio, and more... but it didn't help. Some of the wireless settings are managed by Group Policy from her office (I get the "At least one of your changes was not applied successfully to your wireless configuration" message). It is enforced to connect to "Access point (infrastructure) networks only". The real kicker is that my laptop does not an SSID named 'hpsetup' here, but it can see several broadcasted SSIDs including the one we want, while my friend's laptop doesn't see any SSID except 'hpsetup'. Any suggestions?

  Read the article

• How to play WAV file through Network Paging Interface

  - by BGM

  In our building we have a Viking Paging ZPI-4 Interface for our intercom. The interface receives data from our Asterisk Phone system via a Cisco SPA112 Port Adapter which has it's own IP address on the network and converts digital into analog. Asterisk plays the "5" tone and then allows the user's voice to commence over the connection. Now, what I want to do is to play a wav file over this Viking Paging device using the Cisco Port Adapter. I know how to get Asterisk to do it, but I want to do this without Asterisk. I want some kind of program that can talk to the Cisco Port Adapter and then transmit the wav file into the Viking Paging Device. What kind of program do I need to get or make? Now, I found this link if it helps anyone with ideas. I also found this information, but I'm not sure how to apply it. I also found this, but it involves an arduino. However, I already have the analog-to-digital convertor, and the Viking will handle sending sound over the paging speakers. I just need to know how to send the wav file to the Viking via the Port Adapter. So far, I know my wav file should be formatted as 8bit mono, and I need to send the "5" tone to open the Viking Pager's channel. [update] I am trying to figure out if I can use VLC player to stream to the ipaddress of the Port Adapter. So far I'm not having success with that, and don't even know if it will work. Windows Media Player has a streaming option too. I am thinking that since the Cisco Port Adapter thinks it is a sort of phone, that the only way this can be done is via SIP.

  Read the article

• Permission Denied for FTP User

  - by Alasdair

  I have an FTP user whose default is /root/ftpuser This user can login fine. The user is the owner of the directory & the directory is even set to 777 permissions. But the user can't upload anything, the display is: Status: Connecting to xx.xxx.xxx.xx:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 05:12. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER ftpuser Response: 331 User ftpuser OK. Password required Command: PASS ********* Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of test.html Command: CWD / Response: 550 Can't change directory to /: Permission denied Command: MKD / Response: 550 Can't create directory: Permission denied Command: CWD / Response: 550 Can't change directory to /: Permission denied Command: SIZE /btn.png Response: 550 Can't check for file existence Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (66,232,106,33,52,218) Command: STOR /test.html Response: 553 Can't open that file: Permission denied Error: Critical file transfer error It's a Linux CentOS 6 server. Any ideas?

  Read the article

• Postfix relay all mail through SES except for one sending domain / address

  - by Kevin

  I'm thinking this is really really super simple, but I can't figure out what I need to do. I don't mess with Postfix much (Just let it run and do its thing) so I've got no idea where to even start with this. We have postfix currently configured to relay all mail out through SES using the code below. We need to modify this so that emails sent from one of our domains (domain.com) DO NOT go through SES. Everything else should continue to flow out through the SES connection. I'm assuming this is like a one line thing but my google skills are not helping me at all. relayhost = email-smtp.us-east-1.amazonaws.com:25 smtp_sasl_auth_enable = yes smtp_sasl_security_options = noanonymous smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_use_tls = yes smtp_tls_security_level = encrypt smtp_tls_note_starttls_offer = yes smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_destination_concurrency_limit = 450 Update I have created sender_transport file in /etc/postfix. In it is @domain.com smtp: I then ran this through postmap and placed sender_dependent_default_transport_maps = hash:/etc/postfix/sender_transport above the above block of code and restarted postfix, but still all email is going out through SES. Log after sending Oct 22 14:38:48 web postfix/smtp[19446]: 4B19D640002: to=<[email protected]>, relay=email-smtp.us-east-1.amazonaws.com[54.243.47.187]:25, delay=1.4, delays=0.01/0/0.92/0.44, dsn=2.0.0, status=sent (250 Ok 00000141e21b181f-ee6f7c4f-f0f5-4b0f-ba69-2db146a4f988-000000) Oct 22 14:38:48 web postfix/qmgr[19435]: 4B19D640002: removed I don't think this log is what you're looking for, but it's the only thing that is logged when mail goes out, and this is with me running /usr/sbin/postfix -v start manually and not with the init script.

  Read the article

• Flickering dual screens in Virtual Box Ubuntu 13.10 Guest

  - by alexleonard

  I have Ubuntu 13.10 x64 installed as a guest in VirtualBox (under a Windows 8.1 host) and have the settings for the virtual machine setup to run with a monitor count of 2, 128MB video memory and 3D acceleration enabled. In my guest I have the virtual box additions installed (which allowed me to have two 1920x1080 screens). Here's a screenshot of my VM settings. My laptop is an Asus N550JV which has both Intel's HD Graphics 4600 GPU and Nvidia's GeForce GT 750M. By default though I believe the Intel GFX card is being used to render the VM. When I boot up the VM it loads perfectly on dual screens, however whenever I move the mouse from one screen to the other (I have a Dell S2340L running over a HDMI connection as a second screen) the screen flickers. I've tried a variety of settings changes in both Ubuntu and the VM settings, but cannot seem to stop this screen flicker. I also used the NVidia control panel in Windows to force the dedicated graphics card to always be used but found that the display driver sometimes crashed whilst working in the VM, resulting in my VM session being destroyed, so I figured it's better to stick with the Intel GFX as that appears to be more stable. I also tried without 3D acceleration but that was much worse, and if I ran the VM with a low amount of graphics memory it really struggled. Here's my dmesg output: http://pastebin.com/1LJuYWMj (not sure if this is helpful in this situation). I read some posts suggesting changes to /etc/X11/xorg.conf but I don't appear to have an xorg.conf file. There were also a few posts (though related to Synergy) suggesting running xset -dpms but this command doesn't appear to have had any effect for me. As an additional note, I'm finding that window drawing in the guest is a little laggy/glitchy. For example, quickly scrolling through a web page may result in parts of the viewport displaying original content. Certainly I notice drawing issues most in the web browser, but it also impacts other software with parts of the window not being drawn when, say, switching between accounts in thunderbird. Any suggestions greatly appreciated!

  Read the article

• Windows XP / Outlook 2003 error messages

  - by AboutDev

  Can anyone help with this issue? I am trying to help someone and could use some expertise. Error Message #1: Microsoft Office Small Business Edition 2003 With CD icon "The feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'Microsoft Office Small Business Edition 2003' disk and click OK. Use source: Microsoft Office Small Business Edition 2003" 1st got this message after CD was inserted to recover partial file STDP11N. Recovered STDP11N, however, still receiving pop up window with error message each time outlook opens. Had accidentally cleaned up old programs and suddenly this was missing. Reinstalled Microsoft Office Small Business Edition 2003 using install CD. Outlook worked buit keep getting error message pop up each time I open Outlook. Hit ok. Error Message #2: The path 'Microsoft Office Small Business Edition 2003' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'STDP11N.MSI' in a folder from which you can install the product Microsoft Office Small Business Edition 2003." Hit ok. Back to error message #1 Hit close window Error message #3: Error 1706. Setup cannot find the required files. Check your connection to the network, or CD-ROM drive. For other potential solutions to this problem, see C:\Program Files\Microsoft Office\ OFFICE11\1033\SETUP.CHM Error message #4 I'd created a file under D: drive on an external drive. "The path specified for the file D:...etc.. .pst is not valid. Hit ok. Brings up window to look in My Documents.

  Read the article

• netkit: why cant my router 4 pc4 ping my router 1 pc1 - how can I solve this please?

  - by donok

  Below I have four routers connected but my pc1 on r1 cannot ping my pc4 on r4 and also my pc2 on r2 cant ping my pc4 on r4 and vice versa. Below is a network diagram: and the configurations are below that, could anyone help me please on making them accessible? ![connecting 4 routers][1] I cant post my diagram on serverfault(less than 10 rep) so I did on stackoverflow and asked the same question. pc1: ifconfig eth0 195.11.14.5 netmask 255.255.255.0 broadcast 195.11.14.255 up route add default gw 195.11.14.1 dev eth0 pc2.start: ifconfig eth0 200.1.1.7 netmask 255.255.255.0 broadcast 200.1.1.255 up route add default gw 200.1.1.1 dev eth0 pc3: ifconfig eth0 195.20.14.9 netmask 255.255.255.0 broadcast 195.20.1.255 up route add default gw 195.20.14.1 dev eth0 pc4: ifconfig eth0 200.2.1.11 netmask 255.255.255.0 broadcast 200.2.1.255 up route add default gw 200.2.1.1 dev eth0 r1: ifconfig eth0 195.11.14.1 netmask 255.255.255.0 broadcast 195.11.14.255 up ifconfig eth1 100.0.0.9 netmask 255.255.255.252 broadcast 100.0.0.11 up route add -net 200.1.1.0 netmask 255.255.255.0 gw 100.0.0.10 dev eth1 route add default gw 100.0.0.10 lab.conf: if you need more on that Ill post it up but I think most of the info is there. Any help would be greatly appreciated especially trying to make a connection between pc4 and pc1, even if you think it does not make sense please explain why. Thank you.

  Read the article

• IIS 7.5 fails to open database after computer machine on that database server is working restarts.

  - by Jenea

  Hi. I decided to post this question also here in case the issues we have is related to sql server. There is a problem that bother me for some time. I have an asp.net mvc that uses NHibernate for modeling the database. The infrastructure is the following: Windows 2008 R2 for all virtual machines. IIS 7.5 is working on one virtual machine. Sql Server 2008 is working on another virtual machine. We have couple of databases, two that stores application data and one that registers all unhandled exceptions. Sometimes virtual machine that hosts database server restarts (in the middle of the night, not quite sure about the reason) after that connection to the databases that stores application data is not working and as result there are thousands of unhandled exceptions that get registered in the third database. Important to mention that databases are accessible from Management Studio. The problem is solved by resetting IIS. Connetion are handled via NHibernateUtil class which opens and closes session at each request.

  Read the article

• Ubuntu 10.04->10.10 in failed state - how to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: (1) "Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a)." (2) "gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok]" (3) "gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ..." What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• mod_fcgi produces random 500 Errors

  - by DmitrySemenov

  php 5.4.7 via mod_fcgi when I run the site sometimes it works, sometimes it crashed with 500 Internal Error, this is what I see in error.log everytime I run the script [Mon Sep 24 18:50:43 2012] [warn] [client 68.231.194.198] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Mon Sep 24 18:50:43 2012] [error] [client 68.231.194.198] Premature end of script headers: api.php any ideas? vhost config: <VirtualHost :80> ServerAdmin [email protected] DocumentRoot "/home/www/sites/test.com/html/development" ServerName test.com ServerAlias www.test.com ErrorLog "/home/www/sites/test.com/logs/error_log" CustomLog "/home/www/sites/test.com/logs/access_log" common <IfModule mod_fcgid.c> <Directory /home/www/sites/test.com/html/development> Options +ExecCGI AllowOverride All AddHandler fcgid-script .php FCGIWrapper /home/www/php-fcgi-scripts/php-fcgi-starter .php Order allow,deny Allow from all </Directory> FcgidMaxRequestLen 1073741824 </VirtualHost> fcgi.d conf LoadModule fcgid_module modules/mod_fcgid.so # Use FastCGI to process .fcg .fcgi & .fpl scripts AddHandler fcgid-script fcg fcgi fpl # Sane place to put sockets and shared memory file FcgidIPCDir /var/run/mod_fcgid FcgidProcessTableFile /var/run/mod_fcgid/fcgid_shm IdleTimeout 300 BusyTimeout 300 ProcessLifeTime 7200 IPCConnectTimeout 300 IPCCommTimeout 7200 PHP_Fix_Pathinfo_Enable 1 php-fcgi-starter.php #!/bin/sh PHP_CGI=/usr/local/php547/bin/php-cgi PHP_INI=/etc/php547-fastcgi.ini export PHP_FCGI_TIMEOUT=1200 #export PHP_FCGI_CHILDREN=6 export PHP_FCGI_MAX_REQUESTS=1000 exec $PHP_CGI -c $PHP_INI

  Read the article

• Internet Explorer / Windows 7 does not want to show HTML file from local network drive

  - by Jaanus

  Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

  Read the article

• Simplest DNS solution for remote offices

  - by dunxd

  I look after a bunch of remote offices that connect via VPN - a Cisco ASA 5505 in each office acts as Firewall and VPN end point. Beyond that we keep things as simple as possible in the offices to minimise the support burden. We don't have any kind of server except in offices large enough to justify having someone dedicated to IT. Basically there is the ASA, some computers, a network printer and a switch. One of the problems I am seeing in a lot of offices is that DNS requests looking up hosts inside our network often fail - I'm assuming timeouts due to the offices internet connection (they are all in developing world countries) having some sub-optimal qualities (e.g. high latency caused by VSAT segments, or packet loss. The obvious solution to this is to have some sort of local DNS service that can serve local requests - so I think it would need to do zone transfers from our Microsoft Windows 2008 R2 DNS servers at HQ. However, simply installing Windows Servers in each office is both expensive, and creates a support burden. This got me thinking about pfsense/m0n0wall on embedded devices - those can act as a DNS server, and could be configured at HQ and sent out as just something that needs to be plugged into the network and can then be forgotten about by the staff locally. Maybe there are some alternatives to the ASA 5505 that include some DNS functionality. Has anyone here dealt with the problem, either using some kind of embedded device, or found some other solution? Any gotchas or reasons to avoid what I have suggested?

  Read the article

• Protect all XML-RPC calls with HTTP basic auth but one

  - by bodom_lx

  I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

  Read the article

• Ubuntu 9.10 RSA authentication: ssh fails, filezilla runs fine

  - by MariusPontmercy

  This is quite a mistery for me. I usually use passwordless RSA authentication to login into my remote *nix servers with ssh and sftp. Never had any problem until now. I cannot connect to an Ubuntu 9.10 machine: user@myclient$ ssh -i .ssh/Ganymede_key [email protected] [...] debug1: Host 'ganymede.server.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:14 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: .ssh/Ganymede_key (0xb96a0ef8) debug2: key: .ssh/Ganymede_key ((nil)) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: .ssh/Ganymede_key debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: .ssh/Ganymede_key debug1: read PEM private key done: type RSA debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: we did not send a packet, disable method debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Then it falls back to password authentication. If I disable password authentication on the remote machine my connection attempt just fails with a "Permission denied (publickey)." state. Same thing for sftp from command line. The "funny" thing is that the exact same RSA key works like a charm with a Filezilla sftp session instead: 12:08:00 Trace: Offered public key from "/home/user/.filezilla/keys/Ganymede_key" 12:08:00 Trace: Offer of public key accepted, trying to authenticate using it. 12:08:01 Trace: Access granted 12:08:01 Trace: Opened channel for session 12:08:01 Trace: Started a shell/command 12:08:01 Status: Connected to ganymede.server.com 12:08:02 Trace: CSftpControlSocket::ConnectParseResponse() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Retrieving directory listing... 12:08:02 Trace: CSftpControlSocket::SendNextCommand() 12:08:02 Trace: CSftpControlSocket::ChangeDirSend() 12:08:02 Command: pwd 12:08:02 Response: Current directory is: "/root" 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Trace: CSftpControlSocket::ParseSubcommandResult(0) 12:08:02 Trace: CSftpControlSocket::ListSubcommandResult() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Directory listing successful Any thoughts? M

  Read the article

• How to create an alias for a named SQL Server instance

  - by Svish

  On my developer computer I have an SQL Server instance named *developer_2005*. In the resource setting files of a C# application we are creating, the instance name is set to foobar (not really, but just as an example). So when I run the application (in debug or realease) it tries to connect to an SQL Server on localhost, named foobar. I am wondering if it is possible to create an alias or something like that, so that the application actually finds an SQL Server on localhost named foobar, but it is actually connecting to the instance named *developer_2005*. The connection string in the config file of the application is Data Source=localhost\foobar;Initial Catalog=barfoo;Integrated Security=True with provider name System.Data.SqlClient. If I change localhost\foobar to *localhost\developer_2005* then the application can connect like it should. How can I create an alias so that I won't have to change the string in the file? I tried, in SQL Server Management Studio, to create a Server Registration with registered server name "localhost\developer", but this didn't seem to do any good. Not even sure what that really did... But then I discovered SQL Server Configuration Manager\SQL Native Client COnfiguration\Aliases. And I kind of assume this is where the solution lies. But I can't quite figure out how to add a new one... When creating a new one, I have to provide Alias Name, Port No, Protocol and Server, and I don't really have a clue what to put in either of them.

  Read the article

• Ubuntu network card problem.

  - by Steve Greene

  Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, it works fine under Windows Vista. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System.

  Read the article

• ssh from 1 ubuntu box to another ubuntu box

  - by michael

  Hi, I have 2 ubuntu boxes in a WiFi network. Below is the 'ifconfig' of my destination machine. But in my source machine, I tried 'ssh 192.168.1.2' I get connection refused. $ ifconfig eth0 Link encap:Ethernet HWaddr c8:0a:a9:4d:d6:6a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:35 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4508 errors:0 dropped:0 overruns:0 frame:0 TX packets:4508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:330441 (330.4 KB) TX bytes:330441 (330.4 KB) wlan0 Link encap:Ethernet HWaddr 00:23:14:32:e8:dc inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:14ff:fe32:e8dc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:319828 errors:0 dropped:0 overruns:0 frame:0 TX packets:618371 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30642011 (30.6 MB) TX bytes:921522542 (921.5 MB) How to set up so that I can ssh from 1 box to another?

  Read the article

• Mysql connections hanging in login state

  - by Mark Rose

  Suddenly today, I had an issue with connections to mysql hanging when connecting by IP address (e.g. mysql -h 10.1.248.20), but I could still connection using localhost fine, regardless the user. mysql> show processlist; +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | Id | User | Host | db | Command | Time | State | Info | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ | 1 | system user | | NULL | Connect | 10 | Connecting to master | NULL | | 2 | system user | | NULL | Connect | 10 | Has read all relay log; waiting for the slave I/O thread to update it | NULL | | 37 | unauthenticated user | 10.1.248.3:36694 | NULL | Connect | NULL | login | NULL | | 38 | unauthenticated user | 10.1.248.3:36695 | NULL | Connect | NULL | login | NULL | | 39 | unauthenticated user | 10.1.248.3:36696 | NULL | Connect | NULL | login | NULL | | 40 | root | localhost | NULL | Query | 0 | NULL | show processlist | +----+----------------------+------------------+------+---------+------+-----------------------------------------------------------------------+------------------+ 6 rows in set (0.00 sec) Yes, I realize replication was broken in that output above; that was after I tried restart MySQL (it was an emergency). And as suddenly as things stopped working, they started working again. DNS was working fine at the time. Replication was still working. MySQL was responsive. Does anyone have any idea what would cause MySQL logins from remote IPs to hang suddenly?

  Read the article

• Port forwarding with multiple IP's

  - by Jon

  I work at a company which uses a Fortigate 60 router, something I'm not really familiar with. Everything worked fine with it until a week ago when Comcast came in and replaced our modem. It seemed as though the process went smoothly - our connection came back up and our static IP remained the same. However, none of our port forwarding is working. What has me confused is the Comcast modem apparently has two IP addresses. The WAN2 interface for it in the Fortigate router is set to 10.1.10.10. However, all of our port forwarding settings are set to an external IP address of 10.1.10.50. Now this setup used to work fine, so something with the Comcast modem must have changed. How can I find out what? I tried setting a computer to a local IP of 10.1.10.15 so I could open up the web interface for the modem, but I can't even ping 10.1.10.10 when I do that. Any ideas? Thanks!

  Read the article

• Wake on Demand for Apache server in OS X 10.8

  - by Gary

  Mac OS X Mountain Lion does not have a Web Sharing box in the Sharing system prefs menu. It is thoroughly discussed on the web that the Apache server is available, and that it can be turned on manually in the command line, or by using a convenient Prefs Pane. That works while the computer is awake. But, when my computer goes to sleep, the server stops working, even though Wake for Network Access is checked in the Energy Saver Pref Pane. From the discussion on Bonjour, I see that this problem probably results from the fact that Apache isn't registered with Bonjour. Does that sound likely? If not, please make some suggestions. The connection is via hard-wired ethernet. If registration with Bonjour is the problem, I'd like to know how to register it. You gave a nice description of dns-sd, and the command description says dns-sd -R Name Type Domain Port [TXT...] (Register a service)", but I don't know what to use for "Name" or "Type", or the format of the domain. I tried some dns-sd -B searches and found nothing I could use as a model, and it doesn't show up in Bonjour Browser. Any suggestions would be appreciated.

  Read the article

• MySql server answer #2002

  - by LOIC

  Since this morning, phpmyadmin is giving me the error message #2002 the server doesn't answer (or the connection to local Mysql is not well configured) and a message about control-use. I'm disappointed it used to work until 2am last night and now the MySQL engine doesn't want to start (told me sometimes about sockets ..) LAMPP is installed on a ubuntu 12.04 lm@Famou:~$ sudo service mysqld status mysqld: unrecognized service    & lm@Famou:~$ sudo service mysqld start mysqld: unrecognized service  : It never works with 'service' !!! and root@Famou:/opt/lampp# /opt/lampp/lampp restart Stopping XAMPP for Linux 1.7.7... XAMPP: Stopping Apache with SSL... XAMPP: XAMPP-MySQL is not running. XAMPP: Stopping ProFTPD... XAMPP stopped. Starting XAMPP for Linux 1.7.7... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Couldn't start MySQL! XAMPP: Starting ProFTPD... XAMPP for Linux started. is the result of restart lampp

  Read the article

• ASA 5505 Vlan question

  - by Wayne

  I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1<br> nameif inside<br> security-level 100<br> ip address 192.168.110.254 255.255.255.0 <br> !<br> interface Vlan2<br> nameif outside<br> security-level 0<br> pppoe client vpdn group birdie<br> ip address removedIP 255.255.255.255 pppoe <br> !<br> interface Vlan3<br> no forward interface Vlan1<br> nameif home<br> security-level 50<br> ip address 192.168.7.1 255.255.255.0 <br> ! <br> interface Ethernet0/0<br> switchport access vlan 2<br> ! <br> interface Ethernet0/1<br> ! <br> interface Ethernet0/2<br> ! <br> interface Ethernet0/3<br> ! <br> interface Ethernet0/4<br> switchport access vlan 3<br> ! <br> interface Ethernet0/5<br> shutdown <br> ! <br> interface Ethernet0/6<br> shutdown <br> ! <br> interface Ethernet0/7<br> shutdown <br> ! <br> ftp mode passive<br> clock timezone EST -5<br> clock summer-time EDT recurring<br> access-list Outside-In extended permit icmp any any <br> access-list Outside-In extended permit tcp any any eq www <br> access-list Outside-In extended permit tcp any any eq https <br> access-list Outside-In extended permit tcp any any eq 5969 <br> access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 <br>any access-list inside_in extended permit icmp any any <br> access-list inside_in extended permit ip any any <br> access-list home_in extended permit icmp any any <br> access-list home_in extended permit ip any any <br> pager lines 24<br> logging enable<br> logging asdm informational<br> mtu inside 1492<br> mtu outside 1492<br> mtu home 1500 <br> ip local pool vpnuser 192.168.111.5-192.168.111.20<br> icmp unreachable rate-limit 1 burst-size 1<br> asdm image disk0:/asdm-524.bin<br> no asdm history enable<br> arp timeout 14400<br> nat-control <br> global (outside) 1 interface<br> nat (inside) 0 access-list inside_nat0_outbound<br> nat (inside) 1 0.0.0.0 0.0.0.0<br> nat (home) 1 192.168.7.0 255.255.255.0<br> static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 <br> static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 <br> static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 <br> static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 <br> access-group inside_in in interface inside<br> access-group Outside-In in interface outside<br> access-group home_in in interface home<br> route outside 0.0.0.0 0.0.0.0 RemovedIP 1<br>

  Read the article

• Exchange 2010 issuing NDRs to Hotmail/Live & few other domains on receipt of message

  - by John Patrick Dandison

  I'm working through a beast of an issue at the moment. Exchange 2010 single server on prem Hybrid deployment to Office 365 ESMTP filtering turned off on ASA Certain domains (most consistently, Hotmail/Live) cannot send us mail. At one point, we couldn't send out either, but I created a new Send Connector that forces HELO instead of EHLO. I turned on SMTP logging, an example of the failed inbound message connection is below. I've read that it could be that reverse DNS is the problem, i.e., the exchange banner smtp address needs to reverse-DNS back to the same IP. Since it's the default exchange connector, its banner is the server's name, but the DNS name of the MX record is different. I'm waiting for the PTR records to update to reflect the internal name as well. Is that the right direction? Is this all DNS or something different? SMTP Session Log (single failed session for illustration): SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders 220 ExchangeServerName.internalSubDomain.example.com Microsoft ESMTP MAIL Service ready at Mon, 15 Oct 2012 09:57:24 -0400 EHLO col0-omc3-s4.col0.hotmail.com 250-ExchangeServerName.internalSubDomain.example.com Hello [65.55.34.142] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS 250-AUTH NTLM LOGIN 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250-XEXCH50 250-XRDST 250 XSHADOW MAIL FROM:<[email protected]> 08CF5268DABBD9AA;2012-10-15T13:57:24.564Z;1 250 2.1.0 Sender OK RCPT TO:<[email protected]> 250 2.1.5 Recipient OK XXXX 1282 LAST Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXX from COL002-W38 ([65.55.34.135]) by col0-omc3-s4.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command " XXXX 15 Oct 2012 06:57:24 -0700" Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXXXX <[email protected]> Tarpit for '0.00:00:05'

  Read the article

< Previous Page | 601 602 603 604 605 606 607 608 609 610 611 612  | Next Page >