linear linked list invert - Page 607

Cannot write samba shares

- by Batsu

Running samba 3.5 on Red Hat Enterprise 6.1 I'm having issues sharing two folders. Here is the output of testparm: [global] workgroup = DOMAINNAME server string = Samba Server Version %v interfaces = lo, eth1 bind interfaces only = Yes map to guest = Bad User log file = /var/log/samba/log.%m max log size = 50 idmap uid = 16777216-33554431 idmap gid = 16777216-33554431 hosts allow = 10.50.183.48, 10.50.184.41, 10.50.184.199, 10.50.183.160, 127.0.0.1 hosts deny = 0.0.0.0/0 cups options = raw [test] comment = test folder path = /usr/local/samba valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 directory mask = 0775 [test2] comment = another test path = /home/claudio/tst valid users = claudio write list = claudio force user = claudio read only = No create mask = 0775 From the Windows XP machine I'm connecting from I'm able to read test but not write, while for test2 I can't even access the folder (though I can see it listed). ls -l /usr/local ... drwxrwxrwx. 2 claudio claudio 4096 Dec 3 10:39 samba ... ls -l /user/local/samba total 32 -rwxrwxrwx. 1 claudio claudio 9 Nov 29 16:26 asd.txt -rwxrwxrwx. 1 claudio claudio 728 Dec 3 10:16 out.txt ... ls -l /home/claudio/ ... drwxrwxr-x. 2 claudio claudio 4096 Dec 3 09:57 tst ... ls -l /home/claudio/tst total 4 -rw-rw-r--. 1 claudio claudio 4 Dec 3 09:57 asd.txt Any suggestion?

Read the article

In an environment with multiple WiFi access points, do wireless clients sometimes connect to both at the same time?

- by Bobby Burgess

This is more of a curiosity than a problem, but in this new office I have two D-link DAP-2553's connected in a master/slave array (this just means the master keeps certain configuration options aligned with the slave). The network is set to 802.11n-only, and each AP has the same SSID and WPA2 key. The only difference is that they are on different channels (1 and 11). The WiFi network itself is working well. Users can roam around and the signal/speed is fairly consistent. However, I notice that when I look at the 802.11 client list in the web admin page for each of the 2 APs, I see that certain clients are connected to both, for extended periods of time, but I assume they are only passing data through one of them. Not every client is seen on each AP, but at any given time the same MAC address of a WiFi adapter can be associated (and remain associated) with both APs. The client list auto-refreshes every few seconds so I believe I'm looking at the most recent rather than stale information. One of the WiFi adapters that consistently associates with both APs is an Intel Centrino Wireless-N 1030 (laptop chip). Is it part of the WiFi standard that more than one association per WiFi card can be established concurrently on separate APS?

Read the article

Knowledge and user generated content management system to track files, research, proposals, etc.?

- by Eshwar

I'll try keep it short. Here's the scenario: We have employees all over the world performing similar work i.e. research, generating powerpoint slides, word documents, graphics, etc. Many times a lot of this previous work can be reused for another future project. The current arrangement is email and phone calls which as you would agree is quick if you know where to look but otherwise archaic and very very inefficient. So I am looking for software that will allow me to do the following: Tag files e.g. an investor presentation on cellphone usage in kenya would be tagged investor, cellphone, kenya Manage references e.g. if we read something on the internet, should be able to paste that link in some fashion and tag it as above. Preferably cloud based so that it can be accessed by anybody and additionally would be nice (though NOT must) to have access levels (director, manager, everyone) A nice interface that non technically savvy folks can warm up to ;) A desktop app would be handy so that people don't always have to click upload or something A tree based system is inefficient in this case because content is usually linked across branches and also people might not quite agree on one format of a tree. Tagging works around this very nicely. What I have considered so far: Evernote (for its more professional look) Springpad (for its versatility with content) Mendeley (this is a research manager and in some ways ideal, but i fear its limited to PDFs) The goal is that when somebody wants to look for a document, they don't have to ask a colleague, they can just search with keywords and all relevant information shows up. Thanks!

Read the article

SQL Server architecture - they want to move my database to new instance...Why?

- by O'MALLEY

Our current production database environment contains about 10 similarily managed databases. Our agency has just purchased and is installing new blade chasses and wants to move my database to a new instance (leaving the other 9 on another). This decision is being driven by one of our IT staff, not a DBA. I am a project manager, not a DBA but I know enough to not necesarrily have a good feeling about this decision and I am urging our IT department to make a sound decision based on what is best for the database. Our IT department has stated that it is not good to have all our eggs in one basket, and has also stated that my database contains "regulatory data" so it should be on its own instance. A couple of truths: - None of the databases on the current instance are OLTP databases nor are any of them data warehouses - My database currently has joins/views to a couple of the other databases in the production environment So my questions are as follows: Am I wrong to disregard a statement about eggs in baskets? (hello, this is why we have maintenance plans/disaster recovery plans). I'll mention that other databases also have regulatory data too. What types of questions do I need to ask to determine if this is a sound decicion? (A DBA friend mentioned that if the service level agreement of said database does not radically differ from the others then why do they want to do this?) I have done some research on linked servers. What arguments should I bring forth about the fact that I have views setup that rely on data from other DBs currently?

Read the article

The SSL certificate doesn't established

- by Andrey Eagle

situation following: Windows Server 2008 R2 platform. Certificate installation in the IIS Manager occurs successfully with *.cer file but if I refresh the manager (F5), the certificate vanishes from the list. And, respectively in the Bindings window, at https addition, the certificate is absent in the menu. Thus if to open certificates via the MMS console, it can be seen in the Personal store. Whether there is any possibility to make so that the web server could "see" this certificate or how to make so that it didn't disappear from the list? Prompt how to solve this problem, thanks in advance! P.S. The certificate is acquired in tawte. In total that to me provided, these are account data where it is possible simply with save-pastit the certificate in 2 options: PKCS#7 and X.509. Here is the manual I used. P.S.2 If Complete Certificate Request with *.p7b I get an error: Cannot find the certificate request that is associated with this certificate file. Acertificate request must be comleted on the computer where the request was created.

Read the article

Howto change Axis server-config.wsdd so that we don't expect a SOAPAction

- by GKForcare

The problem I'm facing is that the client of my service will never send me a SOAPAction header. How can I tell Axis to still map to the incomming call to my service implementation anyway. I did bump into tricks like adding a Handler like this: <handler name="ReportMapper" type="java:com.mycompany.project.ReportMapper"/> <transport name="http"> <requestFlow> <handler type="ReportMapper"/> <handler type="URLMapper"/> <handler type="java:org.apache.axis.handlers.http.HTTPAuthHandler"/> </requestFlow> <parameter name="qs:list" value="org.apache.axis.transport.http.QSListHandler"/> <parameter name="qs:wsdl" value="org.apache.axis.transport.http.QSWSDLHandler"/> <parameter name="qs.list" value="org.apache.axis.transport.http.QSListHandler"/> <parameter name="qs.method" value="org.apache.axis.transport.http.QSMethodHandler"/> <parameter name="qs:method" value="org.apache.axis.transport.http.QSMethodHandler"/> <parameter name="qs.wsdl" value="org.apache.axis.transport.http.QSWSDLHandler"/> </transport> but that did not help. The mapper is found during the creation of the WSDL but when calling the service, the invoke of the handler is not used. I do need to note that when I simulate the SOAP-call using @curl@ and I do add the SOAPAction header, the invoke is called. Any help would be most appreciated.

Read the article

Blocking HTTPS and P2P Traffic

- by Genboy

I have a Debian server running at the gateway level on a LAN. This runs squid for creating block lists of websites - for eg. blocking social networking on the LAN. Also uses iptables. I am able to do a lot of things with squid & iptables, but a few things seem difficult to achieve. 1) If I block facebook through their http url, people can still access https://www.facebook.com because squid doesn't go through https traffic by default. However, if the users set the gateway IP address as proxy on their web browser, then https is also blocked. So I can do one thing - using iptables drop all outgoing 443 traffic, so that people are forced to set proxy on their browser in order to browse any HTTPS traffic. However, is there a better solution for this. 2) As the number of blocked urls increase in squid, I am planning to integrate squidguard. However, the good squidguard lists are not free for commercial use. Anyone knows of a good squidguard list which is free. 3) Block yahoo messenger, gtalk etc. There are so many ports on which these Instant Messenger softwares work. You need to drop lots of outgoing ports in iptables. However, new ports get added, so you have to keep adding them. And even if your list of ports is current, people can still use the web version of gtalk etc. 4) Blocking P2P. Haven't been able to figure out how to do this till now.

Read the article

Columnstore Case Study #1: MSIT SONAR Aggregations

- by aspiringgeek

Preamble This is the first in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in this deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. Why Columnstore? If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. App: MSIT SONAR Aggregations At MSIT, performance & configuration data is captured by SCOM. We archive much of the data in a partitioned data warehouse table in SQL Server 2012 for reporting via an application called SONAR. By definition, this is a primary use case for columnstore—report queries requiring aggregation over large numbers of rows. New data is refreshed each night by an automated table partitioning mechanism—a best practices scenario for columnstore. The Win Compared to performance using classic indexing which resulted in the expected query plan selection including partition elimination vs. SQL Server 2012 nonclustered columnstore, query performance increased significantly. Logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more. Other than creating the columnstore index, no special modifications or tweaks to the app or databases schema were necessary to achieve the performance improvements. Existing nonclustered indexes were rendered superfluous & were deleted, thus mitigating maintenance challenges such as defragging as well as conserving disk capacity. Details The table provides the raw data & summarizes the performance deltas. Logical Reads (8K pages) CPU (ms) Durn (ms) Columnstore 160,323 20,360 9,786 Conventional Table & Indexes 9,053,423 549,608 193,903 ? x56 x27 x20 The charts provide additional perspective of this data. "Conventional vs. Columnstore Metrics" document the raw data. Note on this linear display the magnitude of the conventional index performance vs. columnstore. The “Metrics (?)” chart expresses these values as a ratio. Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the first in a series of reports on columnstore implementations, results from an initial implementation at MSIT in which logical reads were reduced by over a factor of 50; both CPU & duration improved by factors of 20 or more. Subsequent features in this series document performance enhancements that are even more significant.

Read the article

What kind of server attacks should i be aware of nowadays

- by Saif Bechan

I am recently running a web server, and there is a lot of information online, but it can all be a little confusing. I recently opened my logwatch logs and saw that i get attacked a lot by all sorts of bots. Now I am interested in a list with things I definitely should be aware of nowadays, and possible ways to prevent them. I have read stories about server crashed by floods, crashed by email, and all sorts of crazy stuff. Thing I already did: I have recently blocked all my ports, except for the http and email ports. I disabled IPv6, this was giving me a lot of named errors I have turned on spam DNS blackhole lists to fight spam - sbl.spamhaus.org; - zen.spamhaus.org; - b.barracudacentral.org; I installed and configured mod_security2 on apache There is no remote access possible to my databases That is all i did so far, further I am not aware of any other threats. I want to know if the following things have to be protects. Can I be flooded by emails. How can i prevent this Can there be a break in or flood of my databses Are there things like http floods or whatever Are there any other things i should know before i go public with my server I also want to know if there is some kind of checklist with must-have security protections. I know the OWASP list for writing good web applications, is there something for configuring a server.

Read the article

Getting the number of fragments which passed the depth test

- by Etan

In "modern" environments, the "NV Occlusion Query" extension provides a method to get the number of fragments which passed the depth test. However, on the iPad / iPhone using OpenGL ES, the extension is not available. What is the most performant approach to implement a similar behaviour in the fragment shader? Some of my ideas: Render the object completely in white, then count all the colors together using a two-pass shader where first a vertical line is rendered and for each fragment the shader computes the sum over the whole row. Then, a single vertex is rendered whose fragment sums all the partial sums of the first pass. Doesn't seem to be very efficient. Render the object completely in white over a black background. Downsample recursively, abusing the hardware linear interpolation between textures until being at a reasonably small resolution. This leads to fragments which have a greyscale level depending on the number of white pixels where in their corresponding region. Is this even accurate enough? Use mipmaps and simply read the pixel on the 1x1 level. Again the question of accuracy and if it is even possible using non-power-of-two textures. The problem wit these approaches is, that the pipeline gets stalled which results in major performance issues. Therefore, I'm looking for a more performant way to accomplish my goal. Using the EXT_OCCLUSION_QUERY_BOOLEAN extension Apple introduced EXT_OCCLUSION_QUERY_BOOLEAN in iOS 5.0 for iPad 2. "4.1.6 Occlusion Queries Occlusion queries use query objects to track the number of fragments or samples that pass the depth test. An occlusion query can be started and finished by calling BeginQueryEXT and EndQueryEXT, respectively, with a target of ANY_SAMPLES_PASSED_EXT or ANY_SAMPLES_PASSED_CONSERVATIVE_EXT. When an occlusion query is started with the target ANY_SAMPLES_PASSED_EXT, the samples-boolean state maintained by the GL is set to FALSE. While that occlusion query is active, the samples-boolean state is set to TRUE if any fragment or sample passes the depth test. When the occlusion query finishes, the samples-boolean state of FALSE or TRUE is written to the corresponding query object as the query result value, and the query result for that object is marked as available. If the target of the query is ANY_SAMPLES_PASSED_CONSERVATIVE_EXT, an implementation may choose to use a less precise version of the test which can additionally set the samples-boolean state to TRUE in some other implementation dependent cases." The first sentence hints on a behavior which is exactly what I'm looking for: getting the number of pixels which passed the depth test in an asynchronous manner without much performance loss. However, the rest of the document describes only how to get boolean results. Is it possible to exploit this extension to get the pixel count? Does the hardware support it so that there may be hidden API to get access to the pixel count? Other extensions which could be exploitable would be debugging features like the number of times the fragment shader was invoked (PSInvocations in DirectX - not sure if something simila is available in OpenGL ES). However, this would also result in a pipeline stall.

Read the article

Windows 7 search does not return results from indexed folders

- by Dilbert

I am experiencing this issue over and over again and I just cannot seem to find the answer. It doesn't make sense, but search simply does not return results from folders that certainly have these files inside. It's weird that this technology exists for more than 5 years now (it could be added to Windows XP as an addon), and they still haven't got it right. My folder contains 10 image files with .png extensions. Two scenarios: Scenario 1: I exclude the folder using Indexing options. Search works. Scenario 2: I turn on indexing for this folder. Search does not work. Of course, Agent Ransack returns results every time. When I check Advanced options for the Indexing options inside control panel, .png files are checked in the File Types tab, using the "File Properties filter". What's the deal with this? [Edit] To clarify, this doesn't happen with all folders, but does with more than one. For the "problematic" folders, even *.* doesn't return a single result. I found some advice to clear the archive and readonly attributes for all files (doesn't make sense, but hey), but it didn't work. Indexing status in Control panel is: Indexing complete. 100,000 items indexed. Folder is included in the list. File types list contains the .png extension (although it doesn't work with any filter, not even *.*).

Read the article

Sharepoint AD imported users are becomming sporadically corrupted, causing us to have to create a ne

- by TrevJen

Sharepoint 2007 MOSS with AD imported users. All servers are 2008. I have around 50 users, over the past 2 months, I have had a handful of the users suddenly unable to login to Sharepoint. When they login, they either get a blank screen or they are repropmted. These users are using accounts that have been used for many months, sometimes the problem originates with a password change. In all cases, the users account works on every other Active Directory authenticated resource (domain, exchange, LDAP). In the most recent case, last night I was forced deleted a user ("John smith") because of corruption. The orifinal account name was jsmith. I deleted him from active directory, then deleted him from the profile list in Sharepoint Shared Services. I could not find a way to delete him from the Sharepoint user list, but I reran the import after recreating his account (renamed it too just to be sure to "smithj"). At first, this did not wor, the user could still access all other resources but Sharepoint. then, some 30 minutes later it inexplicably started working. This morning, the user changed passwords, which immediatly broke the login on Sharepoint again. I am at a loss on how to troubleshoot this.

Read the article

Win7 System folder contains infinitely looping SYSTEM(!) directory

- by Matt

My Windows 7 Enterprise computer has been crashing fairly frequently recently, so I decided to boot up in safe mode and run the TrendMicro client I have installed. It froze about 10 minutes into the full system scan, so in the spirit of http://whathaveyoutried.com, I started scanning each folder individually. When I got to ProgramData, the AV failed with an uncaught exception. I then went down a level and tried scanning Application Data, which failed as well. Imagine my surprise when I open the folder just to see the same folder again! As far as I can tell, this folder loop continues indefinitely. (If you are trying to recreate this, keep in mind that ProgramData is a hidden folder.) I'm actually a bit concerned that these are system folders, as this is a brand-new computer with a clean installation. I guess I have three questions: Has anyone else seen/experienced this before? I'm running Win7 SP1. How do I fix this? I've run CHKDSK \F with no success (although it was incredibly slow). What are the ramifications of an infinitely recursive directory? Theoretically speaking, each link takes up memory, so shouldn't I have no space available on my hard drive? (I've got about 180GB left.) I noticed that the tree view on the left only shows the "linked folder" icon on the deeper folders--does this mean anything special? (I've circled the icons or lack thereof in red.) How can the OS even resolve this aberration? And above all, what would happen if I were to select "Expand all folders"??? :P Matt

Read the article

Extract and view Outlook contacts attachment sent to Gmail

- by matt wilkie

A friend forwarded a contact list to my gmail account from Outlook (2007 or 2010, not sure which). I can see there is an attachment in gmail but when I save it to my local drive it's just a plain text file containing the text This attachment is a MAPI 1.0 embedded message and is not supported by this mail system. If I use gmail's "show original message" it contains in part: This is a multipart message in MIME format. ------=_NextPart_000_0016_01CC6656.CE12F030 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit ------=_NextPart_000_0016_01CC6656.CE12F030 Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="winmail.dat" eJ8+Ih0VAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA5AQAAAAAAADoAAEIgAcAGAAAAElQTS5NaWNy b3NvZnQgTWFpbC5Ob3RlADEIAQgABQAEAAAAAAAAAAAAAQkABAACAAAAAAAAAAEDkAYASAgAACgA --8<---snip---8<-- GUC/9NKH95rABgMA/g8HAAAAAwANNP0/pQ4DAA80/T+lDvAm ------=_NextPart_000_0016_01CC6656.CE12F030-- How do I save the attached winmail.dat properly, and open the winmail.dat and extract the contact list? I'm running Windows 7 x64, but have access to an ubuntu linux vmware appliance if needed. I have Outlook 2010, but can't use it to connect directly to gmail as pop3 and imap are blocked by the corporate firewall.

Read the article

What to look for in a switch with LAN/WAN verses an iSCSI SAN?

- by Luke

I'm setting up a VMWare ESXi 5 environment with 3 server nodes. Dell recommended 2x Force10 S60 switches shared (iSCSI SAN, LAN/WAN). The S60 switches are extremely powerful. They have 1.25 GB of buffer cache, < 9us latency. But they are very expensive (online price ~$15k per switch, actual quote a little less). I've been told that "by the book" you should at least have 2 internal switches for SAN, and 2 switches for LAN/WAN (each with a redundant). I know some of the pros and cons of each approach. What I'm wondering is, would it be more cost effective to disjoin the SAN from LAN with less expensive switches? The answer to this question highlights what I should be looking for in a switch for the SAN. What should I be looking for in a LAN/WAN switch, in comparison to the SAN? With the above linked question for the SAN: How is buffer latency measured? When you see 36 MB of buffer cache, is that shared or per port? So 36 MB would be 768kb or 36MB per port? With 3 to 6 servers how much buffer cache do you really need? What else should I be looking at? Our application will be heavily using HTML5 websockets (high number of persistent connections). The amount of data being sent is small; Data sent between client <- server isn't broadcasted (not a chat/IM service). We will be doing some database reporting too (csv export, sums, some joins). We are a small business and on a budget. We'd probably only be able to spend no more than $20k on switches total (2 or 4).

Read the article

DDoS nulling to some ips and other options?

- by Prix

I am looking for some information in regards DDoS in the follow scenario: I have a server that is behind a Cisco Guard and it will be DDoS'ed, I only care about a set list of IPS that by not means are the attackers. Is it possible to null all other ips but this list to actually get any response to my server or in the long run no matter what I do if they have enough DDoS power I will just go down like a flie ? Is there any recommended company out there that can actually cope with a DDoS ? My server will mainly run several clients that will get connected to a external server and all it needs access to is my local MySQL the the private network so I can access it. There will be no other services runnings such as web or ftp etc at least not to the external ips of the server if i ever have to have any of these service they will be on the private network. The MySQL will be available externally only to 1 safe ip not known by anyone but me and internally at localhost + private network. Are there any solutions ?

Read the article

Mavericks permission issues with Windows Server deduplicated shares

- by dmohlmaster

We have a number of 10.9-10.9.3 - Mavericks - machines installed throughout our facility. Much of the user content is pulled from shares stored on our Windows Server 2012 fileservers with deduplication enabled. I have found that files newly written or unoptimized are able to be accessed without issue - read, written, modified, etc. Once the file gets optomized/deduplicated and Windows adds the P & L attributes - sparse and symlink - the Macs running Mavericks begin to have access issues. Once the files get deduplicated, users begin receiving read access errors when copying files (see error1 below). This happens when copying to folders within the current folder tree or copying somewhere to the local system. If you 'stop' the copy operation and retry a few more times, it may eventually work for the specific instance but fail again later. I am however, able to copy these files without issue via the terminal. Other systems running 10.7 do not experience the same issues and are able to access file server resources without issue. Many of the systems having issues are newer and thus not able to be downgraded to 10.8 or 10.7. I have tried finder replacements such as Pathfinder but the results are the same. I know this is at least similar to the issues many Mac users are already experiencing and posting about but I haven't seen it directly linked to deduplication and the attributes written by Windows server. Has anyone seen this issue? Have any solutions been found? Error 1: When copying files after the PL attributes have been set by deduplication. "One or more items can't be copied to "Foler" because you don't have permissions to read them. ******************************************' Via the system.log, I am also seeing the following error when accessing these deduplicated file shares. The reparse point tag listed below is "IO_REPARSE_TAG_DEDUP" Reported error: "smbfs_nget: filename.ext - unknown reparse point tag 0x80000013"

Read the article

Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

- by ZiGi

i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

Read the article

MS Dynamics CRM users disappear

- by Max Kosyakov

Recently we came across quite a weird issue. The administrators say that once in a while they notice that user accounts in MS Dynamics CRM are lost . When a new user is added to the system, the administrators add him/her to the Active Directory first. Then, they go to Dynamics CRM interface, then to system configuration -> administration -> users and add the new user to the CRM, add roles to this user, grant them relevant permissions. Then the user is able to use a custom application, which connects to the Dynamics CRM via WCF. After a while (few weeks or months) the user is unable to use the custom application because Dynamics CRM cannot authorise this user. When administrators open the Dynamics CRM user management interface (configuration -> administration -> users ) and browse through the list of CRM users they cannot find the user in the list. When they try to add the user to Dynamics CRM back, the CRM fails with the error message "User already exists". Moreover, the user still exists in the Active Directory. The admins are very sure the user had been added to the CRM before he/she started to work. The only fact the the user was able to use the custom application normally says that the user had been indeed registered in the CRM. How come the user is not listed in the CRM user management interface at all? Have anyone faced any issues like that? Seen or heard of disappearing CRM users somewhere? Any help is appreciated. Where can one start digging?

Read the article

How can I report a website that uses the webmail APIs to send spam?

- by Igoru

I've signed up for a cool job website that, unfortunately, asks you if you want to "invite your friends", and if you say so, you can give them access to your Gmail contacts to send the invite. However, contrary to what everyone would be expecting, they don't give you a list of who you want to invite; instead, they simply directly send spam to your entire contact list, like old-fashioned Outlook viruses. When you complain about this with them, they simply say "we will check the application and see if there is anything that might be confusing for the users". For me and some other friends (that felt for the same prank), this is a clear break on web best practices and a big disrespect on the users' trust. Thus, I would like to know what can we do to stop the website of using Gmail/Yahoo/Outlook APIs to send spam this way. P.S.: I wonder what would happen if I've given this website the access to post in my Facebook timeline as well. I've got a couple of calls from relatives asking about the email and I wonder how many unrelated people got this spam, like HR addresses from my past and whatnot.

Read the article

How can i export a folder of Firefox Bookmarks into a text file

- by Memor-X

I want to clean up my bookmark folders by getting rid of duplicated/links. i have created a program which will import 2 text files which contains a URL like this File 1: http://www.google/com http://anime.stackexchange.com/ https://www.fanfiction.net/guidelines/ https://www.fanfiction.net/anime/Magical-Girl-Lyrical-Nanoha/?&srt=1&g1=2&lan=1&r=103&s=2 File 2: http://scifi.stackexchange.com/ http://scifi.stackexchange.com/questions/56142/why-didnt-dumbledore-just-hunt-voldemort-down http://anime.stackexchange.com/ http://scifi.stackexchange.com/questions/5650/how-can-the-doctor-be-poisoned the program compares the 2 lists and creates a single master list with duplicate URLs removed. Now i have a few Backup bookmark folders in Firefox which on occasion i'll bookmark all tabs into a new folder with the date of the backup before i close off tabs or do reset my PC. each folder can have between 1000-2000 bookmarks, sometimes there are a bunch of pages which keep getting bookmarked, ie, i have ~50 pages on the Magical Girl Lyrical Nanoha Wiki on different spells, character and terminology which i commonly look back on. I'd like to know how i can export a bookmark folder so i have a list of URLs similar to what i use in my program

Read the article

Same SELECT used in an INSERT has different execution plan

- by amacias

A customer complained that a query and its INSERT counterpart had different execution plans, and of course, the INSERT was slower. First lets look at the SELECT : SELECT ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellid FROM (SELECT DISTINCT CH.treatmentcode AS UA_CH_TREATMENTCODE, CH.cellid AS UA_CH_CELLID FROM CH, DL WHERE CH.contactdatetime > SYSDATE - 5 AND CH.treatmentcode = DL.treatmentcode) CH_CELLS, (SELECT DISTINCT T.treatmentcode AS UA_TR_TREATMENTCODE, T.cellid AS UA_TR_CELLID, T.rundatetime AS UA_TR_RUNDATETIME FROM T, DL WHERE T.treatmentcode = DL.treatmentcode) TRT_CELLS WHERE CH_CELLS.ua_ch_treatmentcode(+) = TRT_CELLS.ua_tr_treatmentcode; The query has 2 DISTINCT subqueries. The execution plan shows one with DISTICT Placement transformation applied and not the other. The view in Step 5 has the prefix VW_DTP which means DISTINCT Placement. -------------------------------------------------------------------- | Id | Operation | Name | Cost (%CPU) -------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 272K(100) |* 1 | HASH JOIN OUTER | | 272K (1) | 2 | VIEW | | 4408 (1) | 3 | HASH UNIQUE | | 4408 (1) |* 4 | HASH JOIN | | 4407 (1) | 5 | VIEW | VW_DTP_48BAF62C | 1660 (2) | 6 | HASH UNIQUE | | 1660 (2) | 7 | TABLE ACCESS FULL | DL | 1644 (1) | 8 | TABLE ACCESS FULL | T | 2744 (1) | 9 | VIEW | | 267K (1) | 10 | HASH UNIQUE | | 267K (1) |* 11 | HASH JOIN | | 267K (1) | 12 | PARTITION RANGE ITERATOR| | 266K (1) |* 13 | TABLE ACCESS FULL | CH | 266K (1) | 14 | TABLE ACCESS FULL | DL | 1644 (1) -------------------------------------------------------------------- Query Block Name / Object Alias (identified by operation id): ------------------------------------------------------------- 1 - SEL$1 2 - SEL$AF418D5F / TRT_CELLS@SEL$1 3 - SEL$AF418D5F 5 - SEL$F6AECEDE / VW_DTP_48BAF62C@SEL$48BAF62C 6 - SEL$F6AECEDE 7 - SEL$F6AECEDE / DL@SEL$3 8 - SEL$AF418D5F / T@SEL$3 9 - SEL$2 / CH_CELLS@SEL$1 10 - SEL$2 13 - SEL$2 / CH@SEL$2 14 - SEL$2 / DL@SEL$2 Predicate Information (identified by operation id): --------------------------------------------------- 1 - access("CH_CELLS"."UA_CH_TREATMENTCODE"="TRT_CELLS"."UA_TR_TREATMENTCODE") 4 - access("T"."TREATMENTCODE"="ITEM_1") 11 - access("CH"."TREATMENTCODE"="DL"."TREATMENTCODE") 13 - filter("CH"."CONTACTDATETIME">SYSDATE@!-5) The outline shows PLACE_DISTINCT(@"SEL$3" "DL"@"SEL$3") indicating that the QB3 is the one that got the transformation. Outline Data ------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') ALL_ROWS OUTLINE_LEAF(@"SEL$2") OUTLINE_LEAF(@"SEL$F6AECEDE") OUTLINE_LEAF(@"SEL$AF418D5F") PLACE_DISTINCT(@"SEL$3" "DL"@"SEL$3") OUTLINE_LEAF(@"SEL$1") OUTLINE(@"SEL$48BAF62C") OUTLINE(@"SEL$3") NO_ACCESS(@"SEL$1" "TRT_CELLS"@"SEL$1") NO_ACCESS(@"SEL$1" "CH_CELLS"@"SEL$1") LEADING(@"SEL$1" "TRT_CELLS"@"SEL$1" "CH_CELLS"@"SEL$1") USE_HASH(@"SEL$1" "CH_CELLS"@"SEL$1") FULL(@"SEL$2" "CH"@"SEL$2") FULL(@"SEL$2" "DL"@"SEL$2") LEADING(@"SEL$2" "CH"@"SEL$2" "DL"@"SEL$2") USE_HASH(@"SEL$2" "DL"@"SEL$2") USE_HASH_AGGREGATION(@"SEL$2") NO_ACCESS(@"SEL$AF418D5F" "VW_DTP_48BAF62C"@"SEL$48BAF62C") FULL(@"SEL$AF418D5F" "T"@"SEL$3") LEADING(@"SEL$AF418D5F" "VW_DTP_48BAF62C"@"SEL$48BAF62C" "T"@"SEL$3") USE_HASH(@"SEL$AF418D5F" "T"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$AF418D5F") FULL(@"SEL$F6AECEDE" "DL"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$F6AECEDE") END_OUTLINE_DATA */ The 10053 shows there is a comparative of cost with and without the transformation. This means the transformation belongs to Cost-Based Query Transformations (CBQT). In SEL$3 the optimization of the query block without the transformation is 6659.73 and with the transformation is 4408.41 so the transformation is kept. GBP/DP: Checking validity of GBP/DP for query block SEL$3 (#3) DP: Checking validity of distinct placement for query block SEL$3 (#3) DP: Using search type: linear DP: Considering distinct placement on query block SEL$3 (#3) DP: Starting iteration 1, state space = (5) : (0) DP: Original query DP: Costing query block. DP: Updated best state, Cost = 6659.73 DP: Starting iteration 2, state space = (5) : (1) DP: Using DP transformation in this iteration. DP: Transformed query DP: Costing query block. DP: Updated best state, Cost = 4408.41 DP: Doing DP on the original QB. DP: Doing DP on the preserved QB. In SEL$2 the cost without the transformation is less than with it so it is not kept. GBP/DP: Checking validity of GBP/DP for query block SEL$2 (#2) DP: Checking validity of distinct placement for query block SEL$2 (#2) DP: Using search type: linear DP: Considering distinct placement on query block SEL$2 (#2) DP: Starting iteration 1, state space = (3) : (0) DP: Original query DP: Costing query block. DP: Updated best state, Cost = 267936.93 DP: Starting iteration 2, state space = (3) : (1) DP: Using DP transformation in this iteration. DP: Transformed query DP: Costing query block. DP: Not update best state, Cost = 267951.66 To the same query an INSERT INTO is added and the result is a very different execution plan. INSERT INTO cc (ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellid)SELECT ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellidFROM (SELECT DISTINCT CH.treatmentcode AS UA_CH_TREATMENTCODE, CH.cellid AS UA_CH_CELLID FROM CH, DL WHERE CH.contactdatetime > SYSDATE - 5 AND CH.treatmentcode = DL.treatmentcode) CH_CELLS, (SELECT DISTINCT T.treatmentcode AS UA_TR_TREATMENTCODE, T.cellid AS UA_TR_CELLID, T.rundatetime AS UA_TR_RUNDATETIME FROM T, DL WHERE T.treatmentcode = DL.treatmentcode) TRT_CELLSWHERE CH_CELLS.ua_ch_treatmentcode(+) = TRT_CELLS.ua_tr_treatmentcode;----------------------------------------------------------| Id | Operation | Name | Cost (%CPU)----------------------------------------------------------| 0 | INSERT STATEMENT | | 274K(100)| 1 | LOAD TABLE CONVENTIONAL | | |* 2 | HASH JOIN OUTER | | 274K (1)| 3 | VIEW | | 6660 (1)| 4 | SORT UNIQUE | | 6660 (1)|* 5 | HASH JOIN | | 6659 (1)| 6 | TABLE ACCESS FULL | DL | 1644 (1)| 7 | TABLE ACCESS FULL | T | 2744 (1)| 8 | VIEW | | 267K (1)| 9 | SORT UNIQUE | | 267K (1)|* 10 | HASH JOIN | | 267K (1)| 11 | PARTITION RANGE ITERATOR| | 266K (1)|* 12 | TABLE ACCESS FULL | CH | 266K (1)| 13 | TABLE ACCESS FULL | DL | 1644 (1)----------------------------------------------------------Query Block Name / Object Alias (identified by operation id):------------------------------------------------------------- 1 - SEL$1 3 - SEL$3 / TRT_CELLS@SEL$1 4 - SEL$3 6 - SEL$3 / DL@SEL$3 7 - SEL$3 / T@SEL$3 8 - SEL$2 / CH_CELLS@SEL$1 9 - SEL$2 12 - SEL$2 / CH@SEL$2 13 - SEL$2 / DL@SEL$2Predicate Information (identified by operation id):--------------------------------------------------- 2 - access("CH_CELLS"."UA_CH_TREATMENTCODE"="TRT_CELLS"."UA_TR_TREATMENTCODE") 5 - access("T"."TREATMENTCODE"="DL"."TREATMENTCODE") 10 - access("CH"."TREATMENTCODE"="DL"."TREATMENTCODE") 12 - filter("CH"."CONTACTDATETIME">SYSDATE@!-5)Outline Data------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') ALL_ROWS OUTLINE_LEAF(@"SEL$2") OUTLINE_LEAF(@"SEL$3") OUTLINE_LEAF(@"SEL$1") OUTLINE_LEAF(@"INS$1") FULL(@"INS$1" "CC"@"INS$1") NO_ACCESS(@"SEL$1" "TRT_CELLS"@"SEL$1") NO_ACCESS(@"SEL$1" "CH_CELLS"@"SEL$1") LEADING(@"SEL$1" "TRT_CELLS"@"SEL$1" "CH_CELLS"@"SEL$1") USE_HASH(@"SEL$1" "CH_CELLS"@"SEL$1") FULL(@"SEL$2" "CH"@"SEL$2") FULL(@"SEL$2" "DL"@"SEL$2") LEADING(@"SEL$2" "CH"@"SEL$2" "DL"@"SEL$2") USE_HASH(@"SEL$2" "DL"@"SEL$2") USE_HASH_AGGREGATION(@"SEL$2") FULL(@"SEL$3" "DL"@"SEL$3") FULL(@"SEL$3" "T"@"SEL$3") LEADING(@"SEL$3" "DL"@"SEL$3" "T"@"SEL$3") USE_HASH(@"SEL$3" "T"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$3") END_OUTLINE_DATA */ There is no DISTINCT Placement view and no hint.The 10053 trace shows a new legend "DP: Bypassed: Not SELECT"implying that this is a transformation that it is possible only for SELECTs. GBP/DP: Checking validity of GBP/DP for query block SEL$3 (#4) DP: Checking validity of distinct placement for query block SEL$3 (#4) DP: Bypassed: Not SELECT. GBP/DP: Checking validity of GBP/DP for query block SEL$2 (#3) DP: Checking validity of distinct placement for query block SEL$2 (#3) DP: Bypassed: Not SELECT. In 12.1 (and hopefully in 11.2.0.4 when released) the restriction on applying CBQT to some DMLs and DDLs (like CTAS) is lifted.This is documented in BugTag Note:10013899.8 Allow CBQT for some DML / DDLAnd interestingly enough, it is possible to have a one-off patch in 11.2.0.3. SQL> select DESCRIPTION,OPTIMIZER_FEATURE_ENABLE,IS_DEFAULT 2 from v$system_fix_control where BUGNO='10013899'; DESCRIPTION ---------------------------------------------------------------- OPTIMIZER_FEATURE_ENABLE IS_DEFAULT ------------------------- ---------- enable some transformations for DDL and DML statements 11.2.0.4 1

Read the article

ORE graphics using Remote Desktop Protocol

- by Sherry LaMonica

Oracle R Enterprise graphics are returned as raster, or bitmap graphics. Raster images consist of tiny squares of color information referred to as pixels that form points of color to create a complete image. Plots that contain raster images render quickly in R and create small, high-quality exported image files in a wide variety of formats. However, it is a known issue that the rendering of raster images can be problematic when creating graphics using a Remote Desktop connection. Raster images do not display in the windows device using Remote Desktop under the default settings. This happens because Remote Desktop restricts the number of colors when connecting to a Windows machine to 16 bits per pixel, and interpolating raster graphics requires many colors, at least 32 bits per pixel.. For example, this simple embedded R image plot will be returned in a raster-based format using a standalone Windows machine: R> library(ORE) R> ore.connect(user="rquser", sid="orcl", host="localhost", password="rquser", all=TRUE) R> ore.doEval(function() image(volcano, col=terrain.colors(30))) Here, we first load the ORE packages and connect to the database instance using database login credentials. The ore.doEval function executes the R code within the database embedded R engine and returns the image back to the client R session. Over a Remote Desktop connection under the default settings, this graph will appear blank due to the restricted number of colors. Users who encounter this issue have two options to display ORE graphics over Remote Desktop: either raise Remote Desktop's Color Depth or direct the plot output to an alternate device. Option #1: Raise Remote Desktop Color Depth setting In a Remote Desktop session, all environment variables, including display variables determining Color Depth, are determined by the RCP-Tcp connection settings. For example, users can reduce the Color Depth when connecting over a slow connection. The different settings are 15 bits, 16 bits, 24 bits, or 32 bits per pixel. To raise the Remote Desktop color depth: On the Windows server, launch Remote Desktop Session Host Configuration from the Accessories menu.Under Connections, right click on RDP-Tcp and select Properties.On the Client Settings tab either uncheck LimitMaximum Color Depth or set it to 32 bits per pixel. Click Apply, then OK, log out of the remote session and reconnect.After reconnecting, the Color Depth on the Display tab will be set to 32 bits per pixel. Raster graphics will now display as expected. For ORE users, the increased color depth results in slightly reduced performance during plot creation, but the graph will be created instead of displaying an empty plot. Option #2: Direct plot output to alternate device Plotting to a non-windows device is a good option if it's not possible to increase Remote Desktop Color Depth, or if performance is degraded when creating the graph. Several device drivers are available for off-screen graphics in R, such as postscript, pdf, and png. On-screen devices include windows, X11 and Cairo. Here we output to the Cairo device to render an on-screen raster graphic. The grid.raster function in the grid package is analogous to other grid graphical primitives - it draws a raster image within the current plot's grid. R> options(device = "CairoWin") # use Cairo device for plotting during the session R> library(Cairo) # load Cairo, grid and png libraries R> library(grid) R> library(png) R> res <- ore.doEval(function()image(volcano,col=terrain.colors(30))) # create embedded R plot R> img <- ore.pull(res, graphics = TRUE)$img[[1]] # extract image R> grid.raster(as.raster(readPNG(img)), interpolate = FALSE) # generate raster graph R> dev.off() # turn off first device By default, the interpolate argument to grid.raster is TRUE, which means that what is actually drawn by R is a linear interpolation of the pixels in the original image. Setting interpolate to FALSE uses a sample from the pixels in the original image.A list of graphics devices available in R can be found in the Devices help file from the grDevices package: R> help(Devices)

Read the article

SSH Interactive mode not working

- by Ekin Koc

I have a Debian based linux server running for a year or so, without any problems. A couple of days ago, ssh interactive mode stopped working for no reason. I mean, I can open an ssh connection just fine, the server greets me with shell but I just can't type anything. However, if I send commands like this: ssh [email protected] cat /var/log/messages, I get the response. I dug through several logs and found one message, which feels remotely relevant to the problem; sh kernel: [10222733.062511] ------------[ cut here ]------------ sh kernel: [10222733.062522] WARNING: at /build/buildd-linux-2.6_2.6.32-39-amd64-7yVIH2/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/char/tty_ldisc.c:738 tty_ldisc_reinit+0x46/0x7b() sh kernel: [10222733.062526] Hardware name: PowerEdge R210 II sh kernel: [10222733.062528] Modules linked in: ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables x_tables sha1_generic arc4 ecb ppp_mppe ppp_async crc_ccitt ppp_generic slhc loop snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core pcspkr evdev joydev dcdbas container button processor ext3 jbd mbcache sg sd_mod sr_mod crc_t10dif cdrom usb_storage usbhid hid mpt2sas ahci ehci_hcd libata scsi_transport_sas usbcore bnx2 nls_base scsi_mod fan thermal thermal_sys [last unloaded: scsi_wait_scan] sh kernel: [10222733.062568] Pid: 8662, comm: sshd Not tainted 2.6.32-5-amd64 #1 sh kernel: [10222733.062569] Call Trace: sh kernel: [10222733.062572] [<ffffffff811ff056>] ? tty_ldisc_reinit+0x46/0x7b sh kernel: [10222733.062574] [<ffffffff811ff056>] ? tty_ldisc_reinit+0x46/0x7b Is there any way to get back the sshd working in interactive mode? I tried restarting sshd but that is no help. And somehow, I can not reboot the server. Tried sending shutdown -r now and reboot but it refuses to go down. Should I go ahead and request a physical reboot?

Read the article

Should I expect ICMP transit traffic to show up when using debug ip packet with a mask on a Cisco IOS router?

- by David Bullock

So I am trying to trace an ICMP conversation between 192.168.100.230/32 an EZVPN interface (Virtual-Access 3) and 192.168.100.20 on BVI4. # sh ip access-lists 199 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 # sh debug Generic IP: IP packet debugging is on for access list 199 # sh ip route | incl 192.168.100 192.168.100.0/24 is variably subnetted, 2 subnets, 2 masks C 192.168.100.0/24 is directly connected, BVI4 S 192.168.100.230/32 [1/0] via x.x.x.x, Virtual-Access3 # sh log | inc Buff Buffer logging: level debugging, 2145 messages logged, xml disabled, Log Buffer (16384 bytes): OK, so from my EZVPN client with IP address 192.168.100.230, I ping 192.168.100.20. I know the packet reaches the router across the VPN tunnel, because: policy exists on zp vpn-to-in Zone-pair: vpn-to-in Service-policy inspect : acl-based-policy Class-map: desired-traffic (match-all) Match: access-group name my-acl Inspect Number of Half-open Sessions = 1 Half-open Sessions Session 84DB9D60 (192.168.100.230:8)=>(192.168.100.20:0) icmp SIS_OPENING Created 00:00:05, Last heard 00:00:00 ECHO request Bytes sent (initiator:responder) [64:0] Class-map: class-default (match-any) Match: any Drop 176 packets, 12961 bytes But I get no debug log, and the debugging ACL hasn't matched: # sh log | inc IP: # # sh ip access-lists 198 Extended IP access list 198 10 permit icmp 192.168.100.0 0.0.0.255 host 192.168.100.20 20 permit icmp host 192.168.100.20 192.168.100.0 0.0.0.255 Am I going crazy, or should I not expect to see this debug log? Thanks!

Search Results

Search found 34758 results on 1391 pages for 'linear linked list invert'.

Page 607/1391 | < Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614 | Next Page >

- by Batsu

- by Bobby Burgess

- by Eshwar

- by O'MALLEY

- by Andrey Eagle

- by GKForcare

- by Genboy

- by aspiringgeek

- by Saif Bechan

- by Etan

- by Dilbert

- by TrevJen

- by Matt

- by matt wilkie

- by Luke

- by Prix

- by dmohlmaster

- by ZiGi

- by Max Kosyakov

- by Igoru

- by Memor-X

- by amacias

- by Sherry LaMonica

- by Ekin Koc

- by David Bullock

< Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614 | Next Page >