Search Results

Search found 24726 results on 990 pages for 'message passing'.

Page 607/990 | < Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state [closed]

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

  Read the article

• Cannot install 64-bit version of Visio due to Microsoft Office Single Image 2010

  - by Ryan Kohn

  I tried to install Visio on Windows 7, but I received the below error message. You cannot install the 64-bit version of Office 2010 because you have 32-bit Office products installed. These 32-bit products are not supported with 64-bit installations: Microsoft Office Single Image 2010 If you want to install 64-bit Office 2010, you must uninstall all 32-bit Office products first, and then run setup.exe in the x64 folder. If you want to install 32-bit Office 2010, close this Setup program, and then either go to the x86 folder at the root of your CD or DVD and run setup.exe, or get the 32-bit Office 2010 from the same place you purchased 64-bit Office 2010. I cannot find Microsoft Office Single Image 2010 in the programs list, so I tried to use Microsoft's Fix It to remove the software, but this doesn't resolve my issue.

  Read the article

• OpenGL 3 and the Radeon HD 4850x2

  - by rotard

  A while ago, I picked up a copy of the OpenGL SuperBible fifth edition and slowly and painfully started teaching myself OpenGL the 3.3 way, after having been used to the 1.0 way from school way back when. Making things more challenging, I am primarily a .NET developer, so I was working in Mono with the OpenTK OpenGL wrapper. On my laptop, I put together a program that let the user walk around a simple landscape using a couple shaders that implemented per-vertex coloring and lighting and texture mapping. Everything was working brilliantly until I ran the same program on my desktop. Disaster! Nothing would render! I have chopped my program down to the point where the camera sits near the origin, pointing at the origin, and renders a square (technically, a triangle fan). The quad renders perfectly on my laptop, coloring, lighting, texturing and all, but the desktop renders a small distorted non-square quadrilateral that is colored incorrectly, not affected by the lights, and not textured. I suspect the graphics card is at fault, because I get the same result whether I am booted into Ubuntu 10.10 or Win XP. I did find that if I pare the vertex shader down to ONLY outputting the positional data and the fragment shader to ONLY outputting a solid color (white) the quad renders correctly. But as SOON as I start passing in color data (whether or not I use it in the fragment shader) the output from the vertex shader is distorted again. The shaders follow. I left the pre-existing code in, but commented out so you can get an idea what I was trying to do. I'm a noob at glsl so the code could probably be a lot better. My laptop is an old lenovo T61p with a Centrino (Core 2) Duo and an nVidia Quadro graphics card running Ubuntu 10.10 My desktop has an i7 with a Radeon HD 4850 x2 (single card, dual GPU) from Saphire dual booting into Ubuntu 10.10 and Windows XP. The problem occurs in both XP and Ubuntu. Can anyone see something wrong that I am missing? What is "special" about my HD 4850x2? string vertexShaderSource = @" #version 330 precision highp float; uniform mat4 projection_matrix; uniform mat4 modelview_matrix; //uniform mat4 normal_matrix; //uniform mat4 cmv_matrix; //Camera modelview. Light sources are transformed by this matrix. //uniform vec3 ambient_color; //uniform vec3 diffuse_color; //uniform vec3 diffuse_direction; in vec4 in_position; in vec4 in_color; //in vec3 in_normal; //in vec3 in_tex_coords; out vec4 varyingColor; //out vec3 varyingTexCoords; void main(void) { //Get surface normal in eye coordinates //vec4 vEyeNormal = normal_matrix * vec4(in_normal, 0); //Get vertex position in eye coordinates //vec4 vPosition4 = modelview_matrix * vec4(in_position, 0); //vec3 vPosition3 = vPosition4.xyz / vPosition4.w; //Get vector to light source in eye coordinates //vec3 lightVecNormalized = normalize(diffuse_direction); //vec3 vLightDir = normalize((cmv_matrix * vec4(lightVecNormalized, 0)).xyz); //Dot product gives us diffuse intensity //float diff = max(0.0, dot(vEyeNormal.xyz, vLightDir.xyz)); //Multiply intensity by diffuse color, force alpha to 1.0 //varyingColor.xyz = in_color * diff * diffuse_color.xyz; varyingColor = in_color; //varyingTexCoords = in_tex_coords; gl_Position = projection_matrix * modelview_matrix * in_position; }"; string fragmentShaderSource = @" #version 330 //#extension GL_EXT_gpu_shader4 : enable precision highp float; //uniform sampler2DArray colorMap; //in vec4 varyingColor; //in vec3 varyingTexCoords; out vec4 out_frag_color; void main(void) { out_frag_color = vec4(1,1,1,1); //out_frag_color = varyingColor; //out_frag_color = vec4(varyingColor, 1) * texture(colorMap, varyingTexCoords.st); //out_frag_color = vec4(varyingColor, 1) * texture(colorMap, vec3(varyingTexCoords.st, 0)); //out_frag_color = vec4(varyingColor, 1) * texture2DArray(colorMap, varyingTexCoords); }"; Note that in this code the color data is accepted but not actually used. The geometry is outputted the same (wrong) whether the fragment shader uses varyingColor or not. Only if I comment out the line varyingColor = in_color; does the geometry output correctly. Originally the shaders took in vec3 inputs, I only modified them to take vec4s while troubleshooting.

  Read the article

• Ubuntu 12.04 Server: permissions on /var/www for newly copied files

  - by Abe

  I ran the following commands to set up ACL on the /var/www folder in my Ubuntu 12.04 Server: sudo usermod -g www-data abe sudo chown -R www-data:www-data /var/www sudo chmod -R 775 /var/www I downloaded Wordpress using wget in my /var/www folder and unzipped the downloaded file: cd /var/www wget http://wordpress.org/latest.zip mv latest.zip wordpress.zip unzip wordpress.zip I created a new database and user in mysql and attempted to run the setup process through the web interface. When I enter the configuration info in wordpress I run into the following error message: Sorry, but I can't write the wp-config.php file. When I run ls -la, I see that the files are owned by my user abe, but they are part of the group www-data. Would I have to run the chmod command every time I copy new files to /var/www? sudo chmod -R 775 /var/www

  Read the article

• Resizing partition in Windows 7: how long does it take?

  - by PaulJ

  Okay, maybe this is me worrying about nothing, but... I have a 500 Gb. external drive where I want to create a second partition. I plug it into my Windows 7 box, use Disk Manager and pick the "Shrink Volume" option. It says that the maximum amount to shrink is around 150 Gb. I hit "OK" and it starts working... and it's been going on for about half an hour. The light of the external HD is constantly working. Disk Manager is greyed out and has the "does not respond" message on the top bar; basically, it's behaving as a non-responding application. Is this normal for a drive of this size, or did the application hang? How long would it typically take for a drive like this to resize its partition?

  Read the article

• "sh: /usr/sbin/xenstored: not found" - But it's there?

  - by Matt H

  What would cause running the file /usr/sbin/xenstored to print sh: /usr/sbin/xenstored: not found However, the file /usr/sbin/xenstored is there and is not a symbolic link. Actually I should be running this as root. That prints a similarly odd message. sudo: unable to execute /usr/sbin/xenstored: No such file or directory By the way, xenstored is not a script, it's an ELF executable. My guess is that it's because I haven't gotten all the dependent libraries installed. However, I would expect it to say something like this: ./xenstored: error while loading shared libraries: libxenctrl.so.4.0: cannot open shared object file: No such file or directory Which is true of running xenstored on a system that doesn't have all the required libraries. Why do I get "not found" vs the much more useful "cannot open shared object file"?

  Read the article

• XP Mode under Win 7 Professional: Windows Activation Update failure despite activated Windows

  - by Cristina

  I am trying to install Windows XP Mode from here: http://www.microsoft.com/windows/virtual-pc/download.aspx (the Hardware-Assisted Virtualization Detection Tool has given me the green for proceeding) Even though my Windows has been activated a year or so ago, the download button leads me to a splash screen saying "Windows validation required". I am next forced to download a WindowsActivationUpdate.exe which, after downloading some mysterious "update", fails with the error message "Update installation failed, error information 0x80070002" (rough translation from German). I've tried running it both normally and as Administrator. What could be the problem?

  Read the article

• install red5 demos via installer or within war file manually

  - by dursunturan

  I'm using Ubuntu 10.10 and installed the red5-server package. I've also downloaded oflaDemo.war file from that address. First I tried to install the oflaDemo via installer, but I couldnt reach the goal. I see the .war file under the /tmp directory, I got stuck with this message: "This may take a couple minutes, please wait". After that, I put the downloaded war file into the /webapps directory and wait 10 minutes as mentioned in red5-common.xml. Unfortunately, nothing changed ... So I decided to extract war file manually. I did this: jar -xvf oflaDemo.war Ok, I see all of the unzipped content under the webapps directory, but how can I preview the demo via a web browser? I really need to make live stream via Red5. Please help me.

  Read the article

• Custom one-key keyboard shortcuts in Outlook 2010?

  - by cksubs

  I'm a gmail junkie, and one of my favorite features is the keyboard shortcut "a" inside an email to archive the message. I can't remember if that was the default or if I set it to such a quick little keypress, but by now it's totally ingrained in my memory. I'm setting up Outlook 2010 for work, and set up a similar "quick step" to archive, mark as read, and mark as complete any email. It would be great, except for keyboard shortcuts they only give the option for "CTRL + SHIFT + 1" and other number key options. With a keyboard shortcut that convoluted, I'm not going to remember it and might as well just reach for my mouse. Is there any way to set custom keyboard shortcuts for Outlook 2010? I want one-key shortcuts, not 3-keys-at-once!

  Read the article

• Ubuntu 12.04 64 bit "unable to find medium with live filesystem" AFTER normal install

  - by user88710

  So, I got a new computer (64 bit quad core yada yada). pulled my Ubuntu SSD drive from old machine, installed it into new machine. (my intention here is to have Ubuntu installed on the 120G SSD, Win7 on the main drive) downloaded 64 bit Ubuntu, burned it to a disk. rebooted with Live CD, installed Ubuntu to the SSD drive, had no problems rebooted again, got the grub menu, selected Ubuntu after a minute i got this - "unable to find medium with live filesystem" booting into windows, explorer doesnt even see the SSD. Device manager sees it though. I assume this is because its formatted with ext4. so, The liveCD saw the SSD just fine, installed fine, but when i try to boot ubuntu, i get the error above, heeellllpppp! UPDATE: small update. Windows did a software update that apparently wiped out my grub, so I guess grub was installed on the main drive. I reinstalled Ubuntu (again) on the SSD drive but, still no joy with booting from it. same error message as above.

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• https:// search results appearing on Google for purely http:// site

  - by hydrurga

  I started weeding through my site's search results from Google today, using a site: search, to determine if there are any links that cause 404s and thus need redirecting. To my amazement I noticed numerous https:// results relating to various pages. My site doesn't have a SSL certificate, doesn't serve such pages, doesn't internally link to https:// pages, doesn't include any such files in its sitemap.xml and, for all of these, never has. I decided to do a Google search for https://<my site> and found one site that incorrectly refers to the root of my site with a https:// prefix - I will try to contact them to get them to correct this. I'm not sure however how Googlebot managed to index the non-root files as https://. I can't find any external links to them and surely, without certification, Googlebot should have stalled at the first request? I've just added the following lines to the site's .htaccess (although the surfer still has to navigate through the browser's "This site is a security risk. Abandon hope all ye who enter here!" message(s) first to get there): RewriteEngine On RewriteCond %{HTTPS} on RewriteRule ^(.*)$ http://www.<my site>.org/$1 [R=301,L] replacing <my site> with my domain name. My big question is this though - I would like to use the Google Webmaster Tools Remove URLs feature to remove the https:// pages from the index. Can I be guaranteed that this will only remove the https:// versions of each relevant page and not the valid http:// versions? My thanks to anyone who can help me out with this particular question and the issue in general.

  Read the article

• htaccess correct, Apache logs still showing the evil visitors with 200 code

  - by bulgin

  I hope someone can help me. Please take a look at the following snippet of Apache logs: 95-169-172-157.evilvisitor.com - - [12/Nov/2012:09:46:02 -0500] "GET /the-page-I-dont-want-to-deliver.html HTTP/1.1" 200 9171 "http://hackers.ru/" "Mozilla/4.0 (MSIE 6.0; Windows NT 5.1; Search)" I have the following included in my .htaccess for the root directory of the website and there are no other .htaccess files anywhere that would affect this: RewriteEngine On Options +FollowSymLinks ServerSignature Off ErrorDocument 403 "Nothing Interesting Here" order allow,deny deny from evilvisitor.com deny from hackers.ru deny from anonymouse.org allow from all I also have GeoIP functioning properly and have this included there: #for stuff from different countries RewriteCond %{ENV:GEOIP_COUNTRY_CODE} ^(UA|TR|RU|RO|LV|CZ|IR|HR|KR|TW|NO|NL|NO|IL|SE) RewriteRule ^(.*)$ [R=F,L I know this works because whenever I attempt to access the website from a proxy in say, Spain, I get the error message. I also know it works because when accessing the website from anonymouse.org, the proper error code page is displayed. So then why am I still getting these visitors who successfully access the page I don't want them to see with an Apache 200 code when it should be an error code?

  Read the article

• Can Mailchimp APIs be used to send templated transaction email triggered by actions on my website?

  - by HenryW

  I am currently playing around with Mailchimp's APIs, but the documentation to me is not very clear. Here is what I actually want: Have the templates I created on Mailchimp, be visible on my own server. Assign each template I made to a specific action (logged in,subscribed, created order, or new password). This is functionality that I already tested with Mandrill, but the template exists on mandrill's account. If option 1 is not possible, can I still make my own template in my own environment, and send that template out over Mailchimp or Mandrill? Should I use Mailchimps services for this or send the email directly from my own server? Curent used function: function tep_mandrill_mail($to_name, $to_email_address, $email_subject, $email_text, $from_email_name, $from_email_address) { if (SEND_EMAILS != 'true') return false; $uri = 'https://mandrillapp.com/api/1.0/messages/send-template.json'; $postString = '{ "key": "xxxxxxxxxxx", "template_name": "sometemplatename", "template_content": [ { "name": "header", "content": "*|HEADERSTUFF|*" }, { "name": "main", "content": "*|CONTENTSTUFF|*" }, { "name": "footer", "content": "*|FOOTERSTUFF|*" } ], "message": { "subject": "'.$email_subject.'", "from_email": "'.$from_email_adress.'", "from_name": "'.$from_email_name.'", "to": [ { "email": "'.$to_email_address.'", "name": "'.$to_name.'" } ], "important": false, "track_opens": true, "merge": true, "merge_vars": [ { "rcpt": "'.$to_email_address.'", "vars": [ { "name": "HEADERSTUFF", "content": "'.$email_subject.'" }, { "name": "CONTENTSTUFF", "content": "'.$email_text.'" }, { "name": "FOOTERSTUFF", "content": "paulvale-foot" } ] } ], "tags": [ "password_forgotten" ] }, "async": false, "ip_pool": "Main Pool" }'; $ch = curl_init(); curl_setopt($ch, CURLOPT_URL, $uri); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true ); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true ); curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, $postString); curl_exec($ch); }

  Read the article

• Large temp files created in Windows Server 2003 temp folder

  - by BlueGene

  I'm managing a Windows Server 2003 with around 30 GB space in primary partition. A couple of times the server has crashed with error message saying that the C: drive is full. After searching folders to free up space, I found that lot of temp files being created in C:\WINNT\Temp and some of them of enormous size with more than 2GB. The temp files have common name, Efs###.tmp. Since we encrypt files frequently using Windows's EFS, I initially suspected Windows encryption. But after reading the documentation, I found that Efs###.tmp are in fact created by EFS but they are created only under the folder which you're currently encrypting, not in Temp folder. This looks very strange since Efs##.tmp files shouldn't be created under C:\WINNT\Temp unless someone tried to encrypt that Temp folder itself. The server has Tivoli Backup client. Could that be messing with windows Encryption? Can anyone shed some light on what could be causing the issue?

  Read the article

• MacBook Refuses to Boot

  - by pas09

  I have a MacBook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

  Read the article

• SPUtility.SendMail and the 2048 Character Limit

  - by Damon

  We were in the middle of testing a web part responsible for gathering information from visitors to our Client's website and emailing it to someone responsible for responding to the request.  During testing, however, it was brought to our attention that the message was cutting off at 2048 characters.  Now, 2048 is one of those numbers that is usually indicative of some computational limit, but I was hopeful that Microsoft had thought through the possibility of emailing more than 2048 characters from SharePoint.  Luckily I was right. and wrong. As it turns out, SPUtility.SendMail is not limited to any specific character limit as far as I can tell.  However, each LINE of text that you send via SendMail cannot exceed 2048 characters.  Since we were sending an HTML email it was constructed entirely without line breaks, far exceeding the 2048 character limit and ultimately helping to educate me about this obscure technical limitation whose only benefit thus far is offering me something to rant about on my blog.  The fix is simple, just put in a carriage return and a line break often enough to avoid going past the 2048 character limit.  I'm sure someone can present a great technical reason for the 2048 character limit, but it seems fairly arbitrary since the "\r\n" that got appended to the string are ultimately just characters too.

  Read the article

• face book security problem

  - by SHAN

  *- Please review recent activity on your Facebook account "Your account was recently accessed from a location we're not familiar with. For your protection, please review your recent activity to make sure no one is using your Facebook account without permission. Reviewing your activity takes just a few moments. We'll start by asking you a couple of questions to confirm that this is your account. (If we recognize your computer, you'll be able to skip this step.)" WHEN I TRY TO LOG MY FACE BOOK PROFILE;ABOVE MESSAGE DISPLAYING....WHAT IS A REASON FOUR THIS MATTER? AND AFTER I CLICKED CONTINUE BUTTON SHOW SOME 4TO MY FB FRIENDS BUT I EXACTLY CANT RECOGNIZE THESE 4TOES.. BECAUSE OF THAT I CANT LOG MY FB PROFILE.NOW HOW I LOG TO MY FB PROFILE...?? PLZ HELP ME SOLVE THIS PROBLEM...!!

  Read the article

• What to do when 'dpkg --configure -a' fails with too many errors?

  - by rudivonstaden

  During an upgrade from lucid (10.04) to precise (12.04), the X session froze, and I have been trying to recover the upgrade to get a stable system. I have performed the following steps: Used ssh to log in to the stalled system over the network. Checked the contents of the /var/log/dist-upgrade directory. There was no activity on main.log, apt.log or term.log. top showed that process 'precise' was using about 3% CPU, but I could find no evidence that the upgrade process was still doing anything. 'dpkg' did not show up in top, but it came up with pgrep dpkg | xargs ps Killed the 'dpkg' and 'precise' processes Tried to recover the upgrade by running sudo fuser -vki /var/lib/dpkg/lock;sudo dpkg --configure -a. This was partially successful (some packages were configured), but failed with the message Processing was halted because there were too many errors. I ran the same command a few times, and each time some packages were configured but others failed. Tried running sudo apt-get -f install. It fails with similar errors to dpkg. The current situation is that dpkg --configure -a and sudo apt-get -f install fails with two kinds of error: Dependency issues, e.g.: dpkg: dependency problems prevent configuration of cifs-utils: cifs-utils depends on samba-common; however: Package samba-common is not configured yet. dpkg: error processing cifs-utils (--configure): dependency problems - leaving unconfigured Resource conflict, e.g.: debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Additionally, it seems there's reference to potential boot problems, so I'm not keen to reboot without fixing the install first: dpkg: too many errors, stopping Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-25-generic cryptsetup: WARNING: failed to detect canonical device of /dev/sda1 cryptsetup: WARNING: could not determine root device from /etc/fstab So my question is, how to get a working install when dpkg --configure -a fails?

  Read the article

• Foremost custom file type not accepted by -t argument

  - by Channel72

  I'm trying to recover a deleted file on an ext3 file system using the foremost utility. The file I want to recover is a hpp C++ source code file. However, foremost does not automatically support the hpp file extension, so I have to add it to the config file. So, following the instructions on the man page, I add the following line to the config file: hpp n 50000 include include ASCII Then I run foremost as follows: $foremost -v -T -t hpp -i /dev/md0 -o /home/recover/ Instead of doing anything, it just displays the help message. If I change the hpp to htm or jpg, it works. So apparently foremost isn't accepting the custom file type I added into the config file. But I've looked over this dozens of times now, and I can't see what I'm doing wrong. I'm following the instructions exactly. Why doesn't foremost recognize the new file type I added to the config file?

  Read the article

• Browsing not working in Windows 8

  - by Jonathan Perry

  I'm using Windows 8 Professional installed on Windows 7 using the "Save my preferences and apps" installation option. The Windows works great, apps are downloading and I can listen to online radio stations using the TuneIn radio app meaning the internet connection is alive, however, when I open a browser (either Chrome or IE10) and try to browse the internet, I'm getting an "Unable to resolve DNS" error message. Prior to installing the internet browsing worked flawlessly I must say. I'm using ESET NOD32 Antivirus so I suspect that it might interfere with the web connection now, but I'm not so sure. Internet options show that the PC is set to resolve the DNS automatically. I don't know what to do. My other Win7 PCs in my wifi home network are connecting to the internet without any issues. If anyone can help me resolve this I'll be grateful :) Thanks

  Read the article

• send email from linux

  - by mustapha georges

  I built a Linux server (CentOS). I have an application that sends email using the Zemd_Mail class which uses SMTP. The application configuration asks for Host Port Return path (Y/N) but does not provide explanation. What do I need to set this up? Can I use a gmail account to forward the mail? When I try to send mail now, it does not arrive. I get this log in /var/log/maillog Nov 7 21:50:26 localhost sendmail[8328]: qA82oQEP008328: to==?utf-8?B?bWFydGluLmN5dHJ5bmJhdW0=?= <[email protected]>, ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30467, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (qA82oQHr008329 Message accepted for delivery)

  Read the article

• Server 2008 won't run executables from CMD prompt without .exe extension

  - by Dan

  On one of our production server 2008 boxes, I cannot run executables from a CMD prompt without supplying the full filename, including the '.exe' extension. For example, when running "java" produced the usual "is not recognized as an internal or external command" message, I assumed I had borked the path and/or java_home variables. However, even navigating to the %java_home%\bin directory and typing "java" produced the same error. If I type "java.exe" instead, all works perfectly. The problem does not only affect java.exe. Even Microsoft executables suffer the same problem -- ping fails, ping.exe works; ipconfig fails, ipconfig.exe works; manually created batch file 'test' only works when invoked explicitly as 'test.bat'. Any bright ideas?

  Read the article

< Previous Page | 603 604 605 606 607 608 609 610 611 612 613 614  | Next Page >