Search Results

Search found 24726 results on 990 pages for 'message passing'.

Page 609/990 | < Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >

  • SSD install - what do I need to watch out for when reconfiguring SATA ports?

    - by tim11g
    I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

    Read the article

  • MySQL: Auto-increment value: 0 is smaller than max used value: xx

    - by Rhodri
    Increasingly I'm getting tables having to be repaired dwith the message returned of: Auto-increment value: 0 is smaller than max used value: xx This has happened on tables with 200 rows and tables with ~3 million rows, but so far the same few tables have had the problem. I'm running MySQL 5.0.22. The repairs are run by a script which checks every minute for the need to repair MySQL tables. I also have an automated backup of the 6 Gigabyte database running very two hours and the repairs always get trigged around the time of the backup. Any ideas?

    Read the article

  • fdisk (linux) partitioning raid0

    - by silverrocker
    'm trying to create partitions for a slackware instalation on my computer (beside Windows 7) just to have a nice distro running mostly for school but when I run fdisk and print the partitiontable I get the following message: Partition x does not end on cylinder boundary. (in my case x = 1, just using x to help googlers). I must say I'm using a raid card (AMCC 3ware 9500S SATA RAID Controller). Maybe this is the problem. How can I fix this without loosing any data? (I've posted this qeustion on stack overflow aswell but then people sugjested it should be moved to here, but I don't know how to move my question so I just posted it here manually (I hope that's ok))

    Read the article

  • Conference Calling Meetme.conf PROBLEM - Astarisk

    - by Zafer
    I am facing problem in conference calling (OS ubuntu latest) ... I created a conference Room and an extension no .. when i dial from my softphone (3cx or X-Lite) it says "YOU ARE ENTERING CONFERENCE NO 1234. YOU ARE CURRENTLY THE ONLY PERSON IN THE CONFERENCE) and then a music for a second and then shows connected... Now when i dial form another soft phone the same extension it goes to second conference room and plays the same message .. if i create only one conference room .. the second no. didn't connect to it and says no conference room. CAN some one help me out .... I just want to create a conference room OR extension where 4-5 or 6 people can call and make a conference ... i am not very much expert in linux and asterisk so simple steps to achieve my goal .. Thanks

    Read the article

  • use of Lsh and Rsh keys in windows 7 calculator

    - by Tom
    Does anyone know the function of the Lsh and Rsh keys in Windows 7 calculator when it is in Programmer's mode. One would think it's meant to shift bits left and right, but that doesn't seem to happen: sometimes nothing happens, other times I get a 'Result not defined' message in the display. Has anyone figured it out yet, is this a known bug? While we're at it, does anyone have suggestions for a good calculator, one with a decent reference guide / user guide (windows help doesn't seem to give any hints on what any of the keys do, in any mode).

    Read the article

  • Win 7 Explorer backup and long paths

    - by user53299
    I use Explorer to do backups because Win 7's backup program asks me to take backups previously done and to put them back in the drive. I am opposed to that idea since I believe backups should remain in storage. With Explorer backups (burn and burn to disc) I have encountered the "destination path too long" error message and it shows the name of a folder "Debug" three times. I have hundreds of folders named "Debug" thanks to Visual Studio. At this moment I'm too angry at Microsoft to write a program to determine my 3 longest paths. (Aside: This is all after coincidentally reading two articles about path junctions earlier this evening which already made me kind of unhappy.) Please, is there an easy way to continue to make backups with Explorer? Edit: I should add that renaming paths wrecks Visual Studio projects so I really need to isolate the small number of problem paths or find a cleaner solution.

    Read the article

  • Botting from a stick drive

    - by Zap
    Am trying to boot from a usb stick. Have carefully followed the instructions at the following link and successfully downloaded and installed version Ubuntu 12.04 desk top: http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows I used the Universal-USB-Installer-1.9.0.2 as instructed and choose the "Ubuntu 12.04 desk top" option, after downloading the respective iso/zip file onto my Dell laptop from the Ubuntu site. Also modified my bios to select the usb first as boot drive instead of hard drive. Also, turned off bit blocker on my laptop and usb stick. Usb stick has the setting of "Automatically unlock this drive on this computer". When i reboot my laptop, it first boots into a black screen (i assume is the bios), but prompts saying "Remove disks or other media. Press any key to start". I press any key and regardless the laptop boots up to windows. Hence, it appears that the boot process is checking the USB first before going to the hard drive to look for it's boot disk and starting Windows 7. Is it that the USB stick is not correctly configured with Ubuntu as a boot disk? Is there anything else that i need to do besides the instructions at the following link? http://www.ubuntu.com/download/help/create-a-usb-stick-on-windows How can I ensure that USB boot stick is configured correctly? After running the Universal-USB-Installer-1.9.0.2 to "install" Ubuntu, is there additional configuration/installation steps? What is the first file that the bios would look for on this USB drive? Is this configured somewhere in the bios, or would it just look for an grub file or /boot dir? The only message i get when booting is "Remove disks or other media. Press any key to start". Any and all help would be much appreciated.. Thanks ... :)

    Read the article

  • ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)

    - by OtagoHarbour
    I have MySQL installed on Ubuntu 11.10. I has been working fine for months but yesterday I started getting the following message ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) and cannot get rid of it. I tried /etc/init.d/mysqld start and got bash: /etc/init.d/mysqld: No such file or directory The /etc/init.d/ directory contains mysql but not mysqld. I tried sudo service mysql restart It just hung for about half an hour and then I ctrl-C-ed it. I then tried sudo service mysql start I got mysql start/running But when I tried mysql I got ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) I tried ps aux|grep mysql and got peter 17754 0.0 0.0 4196 768 pts/1 S+ 09:38 0:00 grep --color=auto mysql I ideas about fixing this problem would be most appreciated.

    Read the article

  • SMTP server to deliver mail to Rails app, how?

    - by Gunchars
    all, this is my first question and I hope I chose the right place to post it. Here's what I need help with: I've been looking for this all day and I'm having a hard time finding a SMTP mail server that would fit the following criteria: lightweight, does one thing and does it good is able to route and deliver local mail to a Rails application The second point could be accomplished in any number of ways. I'm running a VPS, so I have full freedom in how to implement this. It could, for example, put messages straight in the db, pipe them to a helper program that would then process them accordingly or also save messages in a mbox file and run a script after every received message. I'm building a small site so the traffic is not going to be a problem. If there are alternative ways to deliver messages to a Rails app, I'd gladly hear about them. Thank you. EDIT: After long searching, I think I've found what I was looking for. Exim is a mail server that can deliver local mail to pipes. Also, Rails 3 and ActionMailer can make it really easy to process the incoming mail. More info here: http://www.exim.org/exim-html-current/doc/html/spec_html/ch29.html http://guides.rubyonrails.org/action_mailer_basics.html#receiving-emails

    Read the article

  • Not able to access other machines on network

    - by TheVillageIdiot
    Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

    Read the article

  • Remote Desktop via VPN from Mac to Windows Vista

    - by Vegar
    I have some problems connecting to my office from home. I'm getting the following error message: Remote Desktop Connection cannot verify the identity of the computer that you want to connect to. Try reconnecting to the Windows-based computer, or contact our administrator. I have downloaded CoRD, and for some reason, that works okay. I can also connect from a Windows 7 running on VMWare Fusion. On Windows 7, I use SonicWall Global VPN Client, and on the Mac, I use VPN tracker, if that is related... What's going on?

    Read the article

  • send email from linux

    - by mustapha georges
    I built a Linux server (CentOS). I have an application that sends email using the Zemd_Mail class which uses SMTP. The application configuration asks for Host Port Return path (Y/N) but does not provide explanation. What do I need to set this up? Can I use a gmail account to forward the mail? When I try to send mail now, it does not arrive. I get this log in /var/log/maillog Nov 7 21:50:26 localhost sendmail[8328]: qA82oQEP008328: to==?utf-8?B?bWFydGluLmN5dHJ5bmJhdW0=?= <[email protected]>, ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30467, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (qA82oQHr008329 Message accepted for delivery)

    Read the article

  • Windows 8 and Cisco AnyConnect client issue

    - by Enrique Lima
    As many of us are doing these days, I have fully moved to Windows 8 on my PCs (laptops and desktops).  And in my role as a consultant I work with many clients, many of them use different vpn technologies.  While pretty much every single vpn client I had installed needed a trick or two to work, well Cisco’s AnyConnect vpn client had some issues.  Installation went well, no problem there.  The problem appeared when I attempted to connect, as I received the following message: Pretty clear what the issue is, right? right??!!?? Doing a bit of research (Google knows!), I cam across the following fix: Using our new favorite shortcut:  Windows Key + X Then Run > regedit. We then Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva From the image you can tell there are additional characters in the DisplayName that interfere with the device being able to be correctly identified. This is what it looks like originally. We will remove those characters so it looks more like: Close all open windows and attempt your connection.

    Read the article

  • iCal4j ics file not importing to Outlook 2010

    - by user1770475
    I'm having trouble importing an ics file via the 'internet calendars' option in Outlook. The file is produced, I believe, by a Java applet. When I open the ics file directly within Outlook 2010 it works fine, i.e. click on the link and open the downloaded file with Outlook. I've also validated it online with the validator mentioned in some Stack Overflow posts. However when I subscribe to the link via internet calendars I get the following error: The file "calendar" is not a valid Internet Calendar file I haven't been able to work out what's going wrong here and the error message isn't particularly helpful. Does anyone have any ideas why this isn't working?

    Read the article

  • Windows XP - Repairing Corrupt System32\Config\System File

    - by SimonTewsi
    My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

    Read the article

  • Summit reflections

    - by Rob Farley
    So far, my three PASS Summit experiences have been notably different to each other. My first, I wasn’t on the board and I gave two regular sessions and a Lightning Talk in which I told jokes. My second, I was a board advisor, and I delivered a precon, a spotlight and a Lightning Talk in which I sang. My third (last week), I was a full board director, and I didn’t present at all. Let’s not talk about next year. I’m not sure there are many options left. This year, I noticed that a lot more people recognised me and said hello. I guess that’s potentially because of the singing last year, but could also be because board elections can bring a fair bit of attention, and because of the effort I’ve put in through things like 24HOP... Yeah, ok. It’d be the singing. My approach was very different though. I was watching things through different eyes. I looked for the things that seemed to be working and the things that didn’t. I had staff there again, and was curious to know how their things were working out. I knew a lot more about what was going on behind the scenes to make various things happen, and although very little about the Summit was actually my responsibility (based on not having that portfolio), my perspective had moved considerably. Before the Summit started, Board Members had been given notebooks – an idea Tom (who heads up PASS’ marketing) had come up with after being inspired by seeing Bill walk around with a notebook. The plan was to take notes about feedback we got from people. It was a good thing, and the notebook forms a nice pair with the SQLBits one I got a couple of years ago when I last spoke there. I think one of the biggest impacts of this was that during the first keynote, Bill told everyone present about the notebooks. This set a tone of “we’re listening”, and a number of people were definitely keen to tell us things that would cause us to pull out our notebooks. PASSTV was a new thing this year. Justin, the host, featured on the couch and talked a lot of people about a lot of things, including me (he talked to me about a lot of things, I don’t think he talked to a lot people about me). Reaching people through online methods is something which interests me a lot – it has huge potential, and I love the idea of being able to broadcast to people who are unable to attend in person. I’m keen to see how this medium can be developed over time. People who know me will know that I’m a keen advocate of certification – I've been SQL certified since version 6.5, and have even been involved in creating exams. However, I don’t believe in studying for exams. I think training is worthwhile for learning new skills, but the goal should be on learning those skills, not on passing an exam. Exams should be for proving that the skills are there, not a goal in themselves. The PASS Summit is an excellent place to take exams though, and with an attitude of professional development throughout the event, why not? So I did. I wasn’t expecting to take one, but I was persuaded and took the MCM Knowledge Exam. I hadn’t even looked at the syllabus, but tried it anyway. I was very tired, and even fell asleep at one point during it. I’ll find out my result at some point in the future – the Prometric site just says “Tested” at the moment. As I said, it wasn’t something I was expecting to do, but it was good to have something unexpected during the week. Of course it was good to catch up with old friends and make new ones. I feel like every time I’m in the US I see things develop a bit more, with more and more people knowing who I am, who my staff are, and recognising the LobsterPot brand. I missed being a presenter, but I definitely enjoyed seeing many friends on the list of presenters. I won’t try to list them, because there are so many these days that people might feel sad if I don’t mention them. For those that I managed to see, I was pleased to see that the majority of them have lifted their presentation skills since I last saw them, and I happily told them as much. One person who I will mention was Paul White, who travelled from New Zealand to his first PASS Summit. He gave two sessions (a regular session and a half-day), packed large rooms of people, and had everyone buzzing with enthusiasm. I spoke to him after the event, and he told me that his expectations were blown away. Paul isn’t normally a fan of crowds, and the thought of 4000 people would have been scary. But he told me he had no idea that people would welcome him so well, be so friendly and so down to earth. He’s seen the significance of the SQL Server community, and says he’ll be back. It’ll be good to see him there. Will you be there too?

    Read the article

  • How to get the basic mail command in ubuntu 10 to work

    - by Maureen Adamson
    I am a college lecturer to whom the task of supporting the students' Linux Server has fallen. My students just need to use the mail command to communicate with me and each other. I thought mail would be there by default but it wasn't. I have tried all the advice I found on the Internet and tried to install mailutils, sendmail, mailx, exim4 and postfix. There were more but I can't remember them all now. After installing (if it works - some of them don't), when I try to send a message they all give me: /usr/sbin/sendmail: file or directory not found. I don't need anything fancy - we don't need to access remote email, just locally on our server. Incidentally the same problems are occurring on the physical server and my test virtual machine, installed at different times but both Ubuntu 10. Can anyone help me?

    Read the article

  • Remote access not working without connected monitor

    - by winSharp93
    I am trying to configure a Windows Server 2008 as a Home Server for my personal use (mainly for storing documents, hosting source-control, etc.). The "server" consists of an Intel Atom 2700DC board and an Intel SSD. Configuring remote access to the server, I am confronted with a very strange problem: As long as a monitor is connected to my server, remote access works without any problems. However, when no monitor is connected at boot-time, remote access simply won't work (I keep getting errors when trying to connect that the remote server was not found or that remote access is disabled). Windows definitely boots when no monitor is connected as I receive a message asking me whether to enter safe mode when booting after powering the server down by plugging the power cord. When I plug in a monitor after boot, it stays turned off and remote desktop connections still fail. Do you have any ideas about what I could try?

    Read the article

  • How does Exchange 2010 prevent auto-reply loop?

    - by Beaming Mel-Bin
    E.g., 2 users have auto-reply configured. User A sends a message to User B. User B's auto-reply gets sent to User A's mailbox. That, in turn, causes an auto-reply to be sent from User A and insanity ensues. How does Exchange 2010 prevent this scenario? Also, can Exchange 2010 prevent a user's mailbox sending more than one auto-reply to the same user in one day? Bonus: Assuming Exchange prevents this, how do I configure the settings?

    Read the article

  • Is there a framework for describing object oriented communication standards/protocols?

    - by martin
    Currently I'm dealing with the development of specifications for communication standards/protocols for b2b-integration based on object oriented models. I.e. if you take a look at the healthcare domain there is HL7v3 with its HDF. Now I ask if there is a more generic framework, that describes how a specification for a communication standard should be developed. For b2b-integration I want to describe a communication standard based on uml models for a broad domain. My thought was to divide the domain into subdomains and derive message type from the resulting model. There is already a given framework, but I want to compare it to another framework. My idea is to compare them using a generic framework. It should describe several levels. Does anybody know such a framework? I have searched a while on google scholar, but haven't an appropiate framework yet. The only thing I have found is ebXML, but I think it is not exactly what I need.

    Read the article

  • How to fix the boot set up?

    - by Chris
    I got two OSes in my PC, Ubuntu and Windows 7. Until yesterday Windows 7 was on top of my dual-boot menu list, but I wanted to change it, so I went inside Windows configurations and put Ubuntu first, but I also set the time to 0 because I thought I could access Windows through Grub. But what happens is that after I upgraded Ubuntu to 11.10, that screen with boot options don't show Windows 7 anymore. I went online searching for a solution to my problem, most of them told me to configure some Grub options and others to use programs to do it. I've done them all and still can't access Windows 7. Just in case my problem is not clear yet, this is how was my boot order before I messed it all up: Windows 7 Ubuntu with a time of 10 secs to choose between both. This is how I wanted it to be: Ubuntu Windows 7 with 0 time to choose, but, inside Ubuntu I could access Windows through that Grub screen. But this is what happens: Ubuntu Windows 7 0 time, so it don't let me choose anything and jumps inside Ubuntu then inside Ubuntu grub doesn't show up anymore (black screen) and it starts Ubuntu normally. I tried to fix this many times from different ways inside Ubuntu but nothing worked, also when I try do something and then upgrade my grub with sudo upgrade-grub it shows this message: Generating grub.cfg ... Found Windows 7 (loader) on /dev/sda1 Skipping Windows 7 (loader) on Wubi system Found linux image: /boot/vmlinuz-3.0.0-12-generic Found initrd image: /boot/initrd.img-3.0.0-12-generic Found linux image: /boot/vmlinuz-2.6.38-12-generic Found initrd image: /boot/initrd.img-2.6.38-12-generic done Thats why in the title I said it could probably be my WUBI messing all up. Anyone heave a solution for this? Do you need more information? I have a netbook so I cannot use the Windows Repair CD.

    Read the article

  • The remote server returned an error: 227 Entering Passive Mode

    - by hmloo
    Today while uploading file to FTP sever, the codes throw an error - "The remote server returned an error: 227 Entering Passive Mode", after research, I got some knowledge in FTP working principle. FTP may run in active or passive mode, which determines how the data connection is established. Active mode: command connection: client >1024  -> server 21 data connection:    client >1024  <-  server 20 passive mode: command connection: client > 1024 -> server 21 data connection:    client > 1024 <- server > 1024 In active mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the client will use PORT command to tell the server:"hi, I opened port XXXX, please connect to me." and then server will use port 20 to initiate the data connection to that client port number. In passive mode, the client connects from a random unprivileged port (N > 1023) to the FTP server's command port(default port 21). If the client needs to transfer data, the sever will tell the client:"hi, I opened port XXXX , please connect to me." and then client will initiate the data connection to that sever port number. In a nutshell, active mode is used to have the server connect to the client, and passive mode is used to have the client connect to the server. So if your FTP server is configured to work in active mode only or the firewalls between your client and the server are blocking the data port range, then you will get error message, to fix this issue, just set System.Net.FtpWebRequest property UsePassive = false. Hope this helps! Thanks for reading!

    Read the article

  • set up re-direct for lan clients to local t&c page

    - by tb2571989
    Hi, I'm trying to set up something on my network so that when users connect and try and use the internet they are re-directed to a locally-hosted terms and conditions and policy page. Once they click "accept" then they will be passed through to their homepage, otherwise if they decline then the window will close or show them an error message. I've spent a while looking into this and am wondering if it's possible to do witout having to setup/add to a firewall. Otheriwse let me know what my options are and I can pass it on. Many Thanks Tom

    Read the article

  • What's the best way to manage error logging for exceptions?

    - by Peter Boughton
    Introduction If an error occurs on a website or system, it is of course useful to log it, and show the user a polite message with a reference code for the error. And if you have lots of systems, you don't want this information dotted around - it is good to have a single centralised place for it. At the simplest level, all that's needed is an incrementing id and a serialized dump of the error details. (And possibly the "centralised place" being an email inbox.) At the other end of the spectrum is perhaps a fully normalised database that also allows you to press a button and see a graph of errors per day, or identifying what the most common type of error on system X is, whether server A has more database connection errors than server B, and so on. What I'm referring to here is logging code-level errors/exceptions by a remote system - not "human-based" issue tracking, such as done with Jira,Trac,etc. Questions I'm looking for thoughts from developers who have used this type of system, specifically with regards to: What are essential features you couldn't do without? What are good to have features that really save you time? What features might seem a good idea, but aren't actually that useful? For example, I'd say a "show duplicates" function that identifies multiple occurrence of an error (without worrying about 'unimportant' details that might differ) is pretty essential. A button to "create an issue in [Jira/etc] for this error" sounds like a good time-saver. Just to re-iterate, what I'm after is practical experiences from people that have used such systems, preferably backed-up with why a feature is awesome/terrible. (If you're going to theorise anyway, at the very least mark your answer as such.)

    Read the article

  • How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

    - by g0lem
    I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

    Read the article

< Previous Page | 605 606 607 608 609 610 611 612 613 614 615 616  | Next Page >