Search Results

Search found 25284 results on 1012 pages for 'test driven'.

Page 608/1012 | < Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >

  • Can a Linksys Router be the cause of bad speeds on a 1.5 mbps link.

    - by gramware
    We use a Linksys 5-port router at a smal organization with about 20 employees. We recently acquired a 1.5 mbps fibre link, but sometimes the link goes down and speeds are still low. On enquirey from the ISP, this was part of the response, However there maybe throttling due to the router in place. A Linksys is a low end router and may be unable to carried traffic of up to 1536Kbps. We are in a position to deploy a Cisco 871 router on test for 2 wks to eliminate that possibility. Also kindly advise the destination of the ping results they look to high. How true is that about the router throttling the network and need for a bigger one.

    Read the article

  • Creating a backup - Rsync - Connection refused (111)

    - by pablofiumara
    I am trying to create a backup of my website for free. I just want to have a backup of my website, including not only all files and the configuration but also the databases. I mean, a full backup. If it can be done automatically, it would be better. I feel there are better ways than using the cpanel to achieve that (actually, I believe sometimes web hosters does not have any cpanel). I read the following on how to do it: Automatically mirror the entire contents and configuration of your main server to a secondary backup server on a completely separate network in a different data centre. Use RSync, FXP, cPanel voodoo, or whatever method you wish to automate syncing. That is why I installed Rsync Daemon which is an alternative to SSH for remote backups. I configured it but the test went wrong. The terminal is showing me this: pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share [sudo] password for pablofiumara: rsync: failed to connect to pablofiumara.com (50.87.147.75): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] pablofiumara@pablofiumara-Lenovo-G470:~$ sudo rsync [email protected]::share failed to connect to 50.87.147.7 (50.87.147.7): Connection refused (111) rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9] What should I do? Is there a better or easier way to achieve what I wish (I mentioned this in the first paragraph)?

    Read the article

  • Web connection speed issue

    - by Iroll750
    I encounter a strange issue with my web (wireless) connection on my laptop (Ubuntu 11.10) I'm able to have 540kbps (down) on all computers in my house (including laptop at the same distance from the box) except me. When i do a speed connection test, i can have this optimal speed immediately after booting. As i surf on the net, watching videos, download things, etc... it becomes slower progressively until 100-110 kbps and the speed remain the same until i reboot. I tried to figure out if a process consume bandwith in background with nethogs but i found nothing suspicious. Any ideas ? Thanks in advance for your help !!

    Read the article

  • Bridging LXC containers to host eth0 so they can have a public IP

    - by Vianney Stroebel
    UPDATE: I found the solution there: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#No_traffic_gets_trough_.28except_ARP_and_STP.29 # cd /proc/sys/net/bridge # ls bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged # for f in bridge-nf-*; do echo 0 $f; done But I'd like to have expert opinions on this: is it safe to disable all bridge-nf-*? What are they here for? END OF UPDATE I need to bridge LXC containers to the physical interface (eth0) of my host, reading numerous tutorials, documents and blog posts on the subject. I need the containers to have their own public IP (which I've previously done KVM/libvirt). After two days of searching and trying, I still can't make it work with LXC containers. The host runs a freshly installed Ubuntu Server Quantal (12.10) with only libvirt (which I'm not using here) and lxc installed. I created the containers with : lxc-create -t ubuntu -n mycontainer So they also run Ubuntu 12.10. Content of /var/lib/lxc/mycontainer/config is: lxc.utsname = mycontainer lxc.mount = /var/lib/lxc/test/fstab lxc.rootfs = /var/lib/lxc/test/rootfs lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethmycontainer lxc.network.ipv4 = 179.43.46.233 lxc.network.hwaddr= 02:00:00:86:5b:11 lxc.devttydir = lxc lxc.tty = 4 lxc.pts = 1024 lxc.arch = amd64 lxc.cap.drop = sys_module mac_admin mac_override lxc.pivotdir = lxc_putold # uncomment the next line to run the container unconfined: #lxc.aa_profile = unconfined lxc.cgroup.devices.deny = a # Allow any mknod (but not using the node) lxc.cgroup.devices.allow = c *:* m lxc.cgroup.devices.allow = b *:* m # /dev/null and zero lxc.cgroup.devices.allow = c 1:3 rwm lxc.cgroup.devices.allow = c 1:5 rwm # consoles lxc.cgroup.devices.allow = c 5:1 rwm lxc.cgroup.devices.allow = c 5:0 rwm #lxc.cgroup.devices.allow = c 4:0 rwm #lxc.cgroup.devices.allow = c 4:1 rwm # /dev/{,u}random lxc.cgroup.devices.allow = c 1:9 rwm lxc.cgroup.devices.allow = c 1:8 rwm lxc.cgroup.devices.allow = c 136:* rwm lxc.cgroup.devices.allow = c 5:2 rwm # rtc lxc.cgroup.devices.allow = c 254:0 rwm #fuse lxc.cgroup.devices.allow = c 10:229 rwm #tun lxc.cgroup.devices.allow = c 10:200 rwm #full lxc.cgroup.devices.allow = c 1:7 rwm #hpet lxc.cgroup.devices.allow = c 10:228 rwm #kvm lxc.cgroup.devices.allow = c 10:232 rwm Then I changed my host /etc/network/interfaces to: auto lo iface lo inet loopback auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 92.281.86.226 netmask 255.255.255.0 network 92.281.86.0 broadcast 92.281.86.255 gateway 92.281.86.254 dns-nameservers 213.186.33.99 dns-search ovh.net When I try command line configuration ("brctl addif", "ifconfig eth0", etc.) my remote host becomes inaccessible and I have to hard reboot it. I changed the content of /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces to: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 179.43.46.233 netmask 255.255.255.255 broadcast 178.33.40.233 gateway 92.281.86.254 It takes several minutes for mycontainer to start (lxc-start -n mycontainer). I tried replacing gateway 92.281.86.254 by : post-up route add 92.281.86.254 dev eth0 post-up route add default gw 92.281.86.254 post-down route del 92.281.86.254 dev eth0 post-down route del default gw 92.281.86.254 My container then starts instantly. But whatever configuration I set in /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces, I cannot ping from mycontainer to any IP (including the host's) : ubuntu@mycontainer:~$ ping 92.281.86.226 PING 92.281.86.226 (92.281.86.226) 56(84) bytes of data. ^C --- 92.281.86.226 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5031ms And my host cannot ping the container: root@host:~# ping 179.43.46.233 PING 179.43.46.233 (179.43.46.233) 56(84) bytes of data. ^C --- 179.43.46.233 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms My container's ifconfig: ubuntu@mycontainer:~$ ifconfig eth0 Link encap:Ethernet HWaddr 02:00:00:86:5b:11 inet addr:179.43.46.233 Bcast:255.255.255.255 Mask:0.0.0.0 inet6 addr: fe80::ff:fe79:5a31/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:6 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4070 (4.0 KB) TX bytes:4168 (4.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2496 (2.4 KB) TX bytes:2496 (2.4 KB) My host's ifconfig: root@host:~# ifconfig br0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b inet addr:92.281.86.226 Bcast:91.121.67.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe43:652b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1453 errors:0 dropped:18 overruns:0 frame:0 TX packets:1630 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145125 (145.1 KB) TX bytes:299943 (299.9 KB) eth0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3178 errors:0 dropped:0 overruns:0 frame:0 TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:298263 (298.2 KB) TX bytes:309167 (309.1 KB) Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:300 (300.0 B) TX bytes:300 (300.0 B) vethtest Link encap:Ethernet HWaddr fe:0d:7f:3e:70:88 inet6 addr: fe80::fc0d:7fff:fe3e:7088/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4168 (4.1 KB) TX bytes:4250 (4.2 KB) virbr0 Link encap:Ethernet HWaddr de:49:c5:66:cf:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I have disabled lxcbr0 (USE_LXC_BRIDGE="false" in /etc/default/lxc). root@host:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.4c72b943652b no eth0 vethtest I have configured the IP 179.43.46.233 to point to 02:00:00:86:5b:11 in my hosting provider (OVH) config panel. (The IPs in this post are not the real ones.) Thanks for reading this long question! :-) Vianney

    Read the article

  • Worker roles in Windows Azure to host a multiplayer server

    - by MrWiggels
    I've been doing research on where to host a simple multi-player backend for a simple game I'm developing. So as a first choice I downloaded the Windows Azure SDK, which provides a nice and simple emulator environment where you can test out your application before uploading. I also download the Azure Social Game Toolkit (Visit), and followed as far as my understanding can take me. So, down to the main question. Is there anybody with experience developing Azure applications. I'm developing a Action RPG game, in a similar vein to Diablo III. I was thinking of putting up Matchmaking, Friends Lists, etc. Is there another way to connect to Azure services via something like UDP or TCP for sending packets or does everything have to go through HTTP requests? Is it even possible to use HTTP request/response for something like this? All game commands will be simple. Because the game server and the clients will be kept in-sync and will have deterministic actions, I'm just going to send actions like "Use Primary Skill" and "Use Secondary Skill". Any hints, ideas, light bulbs or a smack-in-the-face presentation will be much appreciated.

    Read the article

  • Installing BURG (NO MBR!)

    - by StepTNT
    I'd like to install BURG but I don't want it to overwrite my MBR. That's because I've got two bootloader in my system : 1) Default Windows 7 bl in my MBR 2) Grub in /dev/sda2 With the first power button, it will boot as Grub is not installed, so it simply loads Windows, with the second button it boots from /dev/sda2, loading Grub and then Kubuntu. Now I want to replae Grub with Burg. I've installe Burg with burg-install /dev/sda2 --force because I don't want my MBR to be overwritten (pressing the first power button MUST load Windows and avoid showing any sign of Linux things). Setup was completed without errors, and everything seems to work fine : if I open burg-manager it loads my settings, allowing me to change them and to test everything with burg-emu (that works as I want to). So, everything seems fine, Burg's installed, I've changed my settings but.. If I use the second power button, it still loads Grub! (Even a different version from the default Kubuntu one). So, here's the question : How can I replace GRUB that's on /dev/sda2 with BURG and WITHOUT writing it to my MBR? Thanks :)

    Read the article

  • Nginx Restart Issues

    - by heavymark
    All of the sudden when restarting Nginx I get the following error: Restarting nginx: [alert]: could not open error log file: open() "/var/log/nginx/error.log" failed (13: Permission denied) 2011/02/16 17:20:58 [warn] 23925#0: the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /etc/nginx/nginx.conf:1 the configuration file /etc/nginx/nginx.conf syntax is ok 2011/02/16 17:20:58 [emerg] 23925#0: open() "/var/run/nginx.pid" failed (13: Permission denied) configuration file /etc/nginx/nginx.conf test failed On the front end part of the site loads but some files such as the CSS in particular are not loading. They exist on the server but when loading the resources directly in Chrome they say "Oops this page can't be found." I set a special group and user to run my apache files using suexec for my domain files. I think the nginx are owned by root however which I'm assuming is the problem but which nginx file ownerships would I change?

    Read the article

  • How do I fix a garbled screen on a Gateway LT3103u?

    - by paracaudex
    I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

    Read the article

  • Nifty GUI Layout

    - by Jason Crosby
    I am new to JME3 game engine but I know Android XML GUI layouts pretty good. I have a simple layout here and I cant figure out what is wrong. Here is my XML code: <?xml version="1.0" encoding="UTF-8"?> <nifty xmlns="http://nifty-gui.sourceforge.net/nifty-1.3.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://nifty-gui.sourceforge.net/nifty-1.3.xsd http://nifty-gui.sourceforge.net/nifty-1.3.xsd"> <useControls filename="nifty-default-controls.xml" /> <useStyles filename="nifty-default-styles.xml" /> <screen id="start" controller="com.jasoncrosby.game.farkle.gui.MenuScreenGui"> <layer id="layer" backgroundColor="#66CD00" childLayout="center"> <panel id="panel" align="center" valign="center" childLayout="center" visibleToMouse="true"> <image filename="Textures/wood_floor.png" height="95%" width="95%"/> <panel id="panel" align="center" valign="center" childLayout="center" visibleToMouse="true"> <text text="test" font="Interface/Fonts/Eraser.fnt"></text> </panel> </panel> </layer> </screen> Everything works good until I get to displaying the text. I have tried different alignments and tried moving the text into different panels but no matter what I do the text is never in the center of the screen. Its always in the upper left corner so far I can only see the lower right part of the text. I'm sure it has to be something simple but since I'm new to this I'm not noticing anything. Thanks for the help in advance.

    Read the article

  • Essbase Excel Add in - S.o.D.

    - by THE
    #cross { font-size: 72pt; } sadly another long lasting friend is about to be buried in the wet, cold data void that holds past programs (... and AOL CDs). The Essbase Excel Add In is about to be de-continued (see  Doc ID 1466700.1) in January '13. The (already out) version 11.1.2.2.x of the Excel Add In must be considered the last release of this particular program (Unless the guys from Applied OLAP bring out their own version next to the openOffice Add In that they already sport). As expected, SmartView achieved parity in functionality with Release 11.1.2.1.102 and ever since then it was just a question of time when our old buddy would get the shoe. For all users out there like me that have known and worked with the Excel Add In for the last decade(s) this is a loss. SmartView may have functionality parity, and may altogether be the stronger, open technology - capable of Planning forms, connection to HFM etc. .But (from my personal point of view) it will not give the end user the same direct access to his databases, with nothing between him and his Essbase Server. Of course it was to be expected that only one of the two could survive and it was obvious that this would be SmartView, so this does not come as a surprise. Still.A minute for an old friend . . . . . . Thank you, and let us look forward! Unless you had other plans for the upcoming season, why not spend it investigating SmartView for your Essbase interaction needs. We hear that the days between Christmas and new year hold unlimited potential to test out new things. Or take it as a new year resolution: "I will switch to SmartView at the earliest possible moment".

    Read the article

  • Adding SPF records in GoDaddy

    - by Mayank swami
    I have the GoDaddy hosting and send mail using the following code: $to = "[email protected]"; $subject = "Test mail"; $message = "Hello! This is a simple email message."; $from = "[email protected]"; $headers = "From:" . $from; mail($to,$subject,$message,$headers); echo "Mail Sent."; When the mail arrives at its destination I see the following (in red outline) I don't want to show the "via server" and for that there is an option to add a SPF record. To do this I have followed the instructions in this page: Managing DNS for Your Domain Names but it's not working. After that i have tried: v=spf1 include:_spf.google.com ~all as described in http://support.google.com/a/bin/answer.py?hl=en&answer=178723 but I still get the same result. How can I solve this and prevent "via server" showing?

    Read the article

  • Postfix sends email to spam (gmail, hotmail)

    - by razorxan
    I recently installed a postfix + dovecot + dkim multi domain, multi user, multi alias mail server on my debian squeeze system. Everything works except for one big issue that basically makes the whole thing useless: Every single email sent by my server goes straight into spam. (gmail, hotmail) First thing i did is doing the well known allaboutspam test and all is checked (green) except for the BATV thing (yellow): Reverse dns: green HELO Greeting: green RBL: green BATV: yellow SPF: green DKIM: green URIBL: green SPAMAssassin: green Greylist: green I'm really confused and i can't see a way to solve this issue. Ask me any detail if you need.

    Read the article

  • LAN speeds and firewall/switch connections

    - by microchasm
    I have a small network with about ten users. All workstations flow into a Dell PowerConnect 3424 which then has a single link to a SonicWALL firewall and from there to a cable modem. More important than internet connectivity is speed between machines (specifically a Windows Server box on the LAN which everyone uses simultaneously). I believe the 3424 has gigabit connections, but they look like they're for stacking. Is there a way to test the speeds on the LAN to see where the speeds are at? Is there any low-hanging fruit insofar as increasing speeds?

    Read the article

  • Identity Globe Trotters (Sep Edition): The Social Customer

    - by Tanu Sood
    Welcome to the inaugural edition of our monthly series - Identity Globe Trotters. Starting today, the last Friday of every month, we will explore regional commentary on Identity Management. We will invite guest contributors from around the world to share their opinions and experiences around Identity Management and highlight regional nuances, specific drivers, solutions and more. Today's feature is contributed by Michael Krebs, Head of Business Development at esentri consulting GmbH, a (SOA) specialized Oracle Gold Partner based in Ettlingen, Germany. In his current role, Krebs is dealing with the latest developments in Enterprise Social Networking and the Integration of Social Media within business processes.  By Michael Krebs The relevance of "easy sign-on" in the age of the "Social Customer" With the growth of Social Networks, the time people spend within those closed "eco-systems" is growing year by year. With social networks looking to integrate search engines, like Facebook announced some weeks ago, their relevance will continue to grow in contrast to the more conventional search engines. This is one of the reasons why social network accounts of the users are getting more and more like a virtual fingerprint. With the growing relevance of social networks the importance of a simple way for customers to get in touch with say, customer care or contract departments, will be crucial for sales processes in critical markets. Customers want to have one single point of contact and also an easy "login-method" with no dedicated usernames, passwords or proprietary accounts. The golden rule in the future social media driven markets will be: The lower the complexity of the initial contact, the better a company can profit from social networks. If you, for example, can generate a smart way of how an existing customer can use self-service portals, the cost in providing phone support can be lowered significantly. Recruiting and Hiring of "Digital Natives" Another particular example is "social" recruiting processes. The so called "digital natives" don´t want to type in their profile facts and CV´s in proprietary systems. Why not use the actual LinkedIn profile? In German speaking region, the market in the area of professional social networks is dominated by XING, the equivalent to LinkedIn. A few weeks back, this network also opened up their interfaces for integrating social sign-ons or the usage of profile data for recruiting-purposes. In the European (and especially the German) employment market, where the number of young candidates is shrinking because of the low birth rate in the region, it will become essential to use social-media supported hiring processes to find and on-board the rare talents. In fact, you will see traditional recruiting websites integrated with social hiring to attract the best talents in the market, where the pool of potential candidates has decreased dramatically over the years. Identity Management as a key factor in the Customer Experience process To create the biggest value for customers and also future employees, companies need to connect their HCM or CRM-systems with powerful Identity management solutions. With the highly efficient Oracle (social & mobile enabling) Identity Management solution, enterprises can combine easy sign on with secure connections to the backend infrastructure. This combination enables a "one-stop" service with personalized content for customers and talents. In addition, companies can collect valuable data for the enrichment of their CRM-data. The goal is to enrich the so called "Customer Experience" via all available customer channels and contact points. Those systems have already gained importance in the B2C-markets and will gradually spread out to B2B-channels in the near future. Conclusion: Central and "Social" Identity management is key to Customer Experience Management and Talent Management For a seamless delivery of "Customer Experience Management" and a modern way of recruiting the best talent, companies need to integrate Social Sign-on capabilities with modern CX - and Talent management infrastructure. This lowers the barrier for existing and future customers or employees to get in touch with sales, support or human resources. Identity management is the technology enabler and backbone for a modern Customer Experience Infrastructure. Oracle Identity management solutions provide the opportunity to secure Social Applications and connect them with modern CX-solutions. At the end, companies benefit from "best of breed" processes and solutions for enriching customer experience without compromising security. About esentri: esentri is a provider of enterprise social networking and brings the benefits of social network communication into business environments. As one key strength, esentri uses Oracle Identity Management solutions for delivering Social and Mobile access for Oracle’s CRM- and HCM-solutions. …..End Guest Post…. With new and enhanced features optimized to secure the new digital experience, the recently announced Oracle Identity Management 11g Release 2 enables organizations to securely embrace cloud, mobile and social infrastructures and reach new user communities to help further expand and develop their businesses. Additional Resources: Oracle Identity Management 11gR2 release Oracle Identity Management website Datasheet: Mobile and Social Access (pdf) IDM at OOW: Focus on Identity Management Facebook: OracleIDM Twitter: OracleIDM We look forward to your feedback on this post and welcome your suggestions for topics to cover in Identity Globe Trotters. Last Friday, every month!

    Read the article

  • SQL Server 2008 R2: These are a Few of My Favorite Things

    - by smisner
    This month's T-SQL Tuesday is hosted by Jorge Segarra (blog | twitter) who decided that we should write about our favorite new feature in SQL Server 2008 R2. The majority of my published works concentrates on Reporting Services, so the obious answer for me is about favorite new features is...Reporting Services. I can't pick just one thing in Reporting Services, so instead I thought I'd compile a list of my posts of the new features in Reporting Services 2008 R2: Map Wizard for spatial data (The World is But a Stage) Pagination features (I've Got Your Page Number) Lookup functions (Look Up, Look Down, Look All Around - Part I, Part II, Part III) Test Connection button (Testing, Testing 1-2-3) Conditional formatting based on format, i.e. RenderFormat (As You Like It) And I wrote an overview of the business intelligence features in SQL Server 2008 R2 for Microsoft Press in the free e-book, Introducing Microsoft SQL Server 2008 R2, if you're curious about what else is new in both the BI platform as well as the relational engine. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • System testing - making sure the system conforms to specification. Validation?

    - by user970696
    After weeks of research I have nearly completed my thesis, yet I am unable to clear up my confusion contained in all previous threads here (and in many books): During system testing, we check the system function against system analysis (functional system design) - but that would fit to a definition of verification according to many books. But I follow ISO12207, which considers all testing as validation (making sure work product meets requirement for intended use). How can I justify that unit testing or system testing is validation, even though when I check it against specification? Which fullfils the definiton of verification? When testing that e.g. "Save button" works, is it validation? This picture shows my understanding of V&V, so different from many other sources, including ISTQB etc. Essential problem I have is that a book using the same picture also states on another place that: test activities in the area of validation are usability, alpha and beta testing. For verification, testable system requirements are defined whose correct implementation can be tested through system tests. Isn't that the opposite of what the picture says? Most books present the following picture, where validation is just making sure that customer needs are satisfied. Mind you that according to ISO, validation activity is testing.

    Read the article

  • MSDN / TechNet Key Importer for KeePass 2

    - by Stacy Vicknair
    If you have an MSDN account and, like me, systematically claim keys just as well as you systematically forget which keys you’ve used in which test environments! Well, in a meager attempt to help myself track my keys I created an importer for KeePass 2 that takes in the XML document that you can export from MSDN and TechNet. The source is available at https://github.com/svickn/MicrosoftKeyImporterPlugin.   How do I get my KeysExport.xml from MSDN or TechNet? Easy! First, in MSDN, go to your product keys. From there, at the top right select Export to XML. This will let you download an XML file full of your Microsoft Keys.   How do I import it into KeePass 2? The instructions are simple and available in the GitHub ReadMe.md, so I won’t repeat them. Here is a screenshot of what the imported result looks like:   As you can see, the import process creates a group called Microsoft Product Keys and creates a subgroup for each product. The individual entries each represent an individual key, stored in the password field. The importer decides if a key is new based on the key stored in the password, so you can edit the notes or title for the individual entries however you please without worrying about them being overwritten or duplicated if you re-import an updated KeysExport.xml from MSDN! This lets you keep track of where those pesky keys are in use and have the keys available anywhere you can access your KeePass database!   Technorati Tags: KeePass,KeePass 2,MSDN,TechNet

    Read the article

  • Is there a command-line utility app which can find a specific block of lines in a text file, and replace it?

    - by fred.bear
    UPDATE (see end of question) The text "search and replace" utility programs I've seen, seem to only search on a line-by-line basis... Is there a command-line tool which can locate one block of lines (in a text file), and replace it with another block of lines.? For example: Does the test file file contain this exact group of lines: 'Twas brillig, and the slithy toves Did gyre and gimble in the wabe: All mimsy were the borogoves, And the mome raths outgrabe. 'Beware the Jabberwock, my son! The jaws that bite, the claws that catch! Beware the Jubjub bird, and shun The frumious Bandersnatch!' I want this, so that I can replace multiple lines of text in a file and know I'm not overwriting the wrong lines. I would never replace "The Jabberwocky" (Lewis Carroll), but it makes a novel example :) UPDATE: ..(sub-update) My following comment about reasons when not use sed are only in the context of; don't push any tool too far beyond its design intent (I use sed quite often, and consider it to be invaluable.) I just now found an interesting web page about sed and when not to use it. So, because of all the sed answers, I"ll post the link.. it is part of the sed FAQ on sourceforge Also, I'm pretty sure there is some way diff can do the job of locating the block of text (once it's located, the replacement is quite straight foward; using head and tail) ... 'diff' dumps all the necessary data, but I haven't yet worked out how to filter it , ... (I'm still working on it)

    Read the article

  • Can't ping other machines at Linux VPN PPTP server's local lan from outside

    - by Marco Sanchez
    Before anything else, hello guys, this is the first time I ask for something here so I hope someone can give me a hand, please look at the following network diagram: --------------------------------------------------------------- VPN Server Webserver (SuSE SLES11) | | | ------- VPN LAN -------- | Router with Unique IP (With Port Forwarding rules set and VPN through enabled) | PPTP connection over Internet | Workstation (PC or Laptop with Windows) --------------------------------------------------------------- So the idea is for the workstation to connect to the PPTP Server and then be able to access a Web Application on the Webserver, right now I have the PPTP server configured and the VPN works, I can connect to the SLES11 server with no problems from the workstation and I can ping it and everything works fine but if I try to ping the Webserver from the workstation, I can't reach it, I'm making a mistake somewhere but I don't see where, please note that I'm not a network expert and thus I'd greatly appreciate some specific guidance. Here is some info related to the IPs --------------------------------------------------------------- *** SLES11 VPN Server has 2 Network cards: -- eth0 (Internal Network) IP: 192.168.210.5 MASK: 255.55.255.0 -- eth1 (External Network) IP: 192.168.1.105 MASK: 255.55.255.0 *** Webserver has 1 network card -- eth0 (Internal Network) IP: 192.168.210.221 MASK: 255.55.255.0 *** Workstation -- IP info once connection has been established to the VPN PPP adapter Test VPN Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Test VPN Connection Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.210.110(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 0.0.0.0 DNS Servers . . . . . . . . . . . : 189.209.208.181 (Defined as part of the PPTP Server options config script) 189.209.127.244 Primary WINS Server . . . . . . . : 192.168.210.220 (Defined as part of the PPTP Server options config script) NetBIOS over Tcpip. . . . . . . . : Enabled --------------------------------------------------------------- I also defined the following within IP tables: ------------------------------------------------------------- iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A INPUT -i eth0 -p tcp --dport 1723 -j ACCEPT iptables -A INPUT -i eth0 -p gre -j ACCEPT ------------------------------------------------------------- If you need any piece of information from the PPTP server scripts please let me know, the thing is that I can actually connect to the VPN server and access its services and everything but after that I can't reach any other computer on that LAN. Any help would be greatly appreciated and thanks in advance

    Read the article

  • Remove server from loadbalancer [on hold]

    - by Cris
    Our datacenter is load balancing the traffic to our weblogic servers based on an application deployed on each server called probe.ear It is a simple java app which is accessed by the loadbalancer and if it accessible it will redirect traffic to this server as well. When we want to remove one node from the loadbalancer we just stop the probe app and new traffic is not redirected to it BUT I am asking myself what about the current requests? The responses for the current requests are executed (completed). I did not had time to test (will do that first thing when go back to work) but on theoretical level for me it make sense to do so unless the loadbalancer has some special settings. Does my reasoning make sense to you? Just to make it clear since it was reported the question is not clear. Is there a way to configure a load balancer in a way that from a specific moment will not redirect traffic to a certain server without reseting the current requests ?

    Read the article

  • Get Started with JavaFX 2 and Scene Builder

    - by Janice J. Heiss
    Up on otn/java is a very useful article by Oracle Java/Middleware/Core Tech Engineer Mark Heckler, titled, “How to Get Started (FAST!) with JavaFX 2 and Scene Builder.”  Heckler, who has development experience in numerous environments, shows developers how to develop a JavaFX application using Scene Builder “in less time than it takes to drink a cup of coffee, while learning your way around in the process”. He begins with a warning and a reassurance: “JavaFX is a new paradigm and can seem a bit imposing when you first take a look at it. But remember, JavaFX is easy and fun. Let's give it a try.” Next, after showing readers how to download and install JDK/JavaFX and Scene Builder, he informs the reader that they will “create a simple JavaFX application, create and modify a window using Scene Builder, and successfully test it in under 15 minutes.” Then readers download some NetBeans files:“EasyJavaFX.java contains the main application class. We won't do anything with this class for our example, as its primary purpose in life is to load the window definition code contained in the FXML file and then show the main stage/scene. You'll keep the JavaFX terms straight with ease if you relate them to the theater: a platform holds a stage, which contains scenes. SampleController.java is our controller class that provides the ‘brains’ behind the graphical interface. If you open the SampleController, you'll see that it includes a property and a method tagged with @FXML. This tag enables the integration of the visual controls and elements you define using Scene Builder, which are stored in an FXML (FX Markup Language) file. Sample.fxml is the definition file for our sample window. You can right-click and Edit the filename in the tree to view the underlying FXML -- and you may need to do that if you change filenames or properties by hand - or you can double-click on it to open it (visually) in Scene Builder.” Then Scene Builder enters the picture and the task is soon done. Check out the article here.

    Read the article

  • How do you explain to an "agile" team that they still need to plan the software they write?

    - by user23157
    This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

    Read the article

  • Server 2012 R2 DNS Conditional forwarding not working reliably, possible caching issue?

    - by Matt
    I have a bit of a home lab setup with a domain controller that is acting as the DNS server for my network. For everything, it's working fine and forwards external DNS requests to my ISP. The household recently wanted to get Netflix going and it seemed a DNS option was better than a VPN to get around the region locking, so I signed up for unblock-us.com Since I have a Windows DNS server I thought I'd be clever and make use of conditional forwarders and added the Netflix domain to the list. Initially this worked well and all devices on the network could now access Netflix, however after about an hour going to the Netflix site would result in a page cannot be found. Doing an nslookup of Netflix.com from my PC resulted in it not returning any IP addresses. As a test, I deleted the Netflix domain from the DNS servers cache and things started working again - devices could get to the site again however the same thing happens again after around half an hour to an hour. Have I missed something here that's causing it to stop working?

    Read the article

  • Authorization error when testing FTP to UNC

    - by user64204
    We have a Windows Server 2008 R2 with Active Directory (hereafter called DC) running as a domain controller on which we have IIS and an FTP site installed. We have a second Server 2008 (hereafter called SHARE) which is joined to that domain and has a disk shared as a network share (\\share\Office). That network share is used as the ftp's physical path on DC. We've tested the FTP from the IIS FTP configuration panel, by clicking on Basic Settings... then Test Settings.... When setting Administrator as a username with the Connect as... option, everything is fine: When no user is provided we can the below error: Q1: Could someone explain in more understandable terms what is written in the Details text area?

    Read the article

  • How to troubleshoot a remote wmi query/access failure?

    - by Roman
    I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

    Read the article

< Previous Page | 604 605 606 607 608 609 610 611 612 613 614 615  | Next Page >