Search Results

Search found 16787 results on 672 pages for 'mod disk cache'.

Page 610/672 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

• USB drive was bootable, but no longer isn't

  - by i-g

  I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

  Read the article

• SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

  - by Setesh

  Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

  Read the article

• Apps won't start after vanilla reboot

  - by Daniel R Hicks

  I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

  Read the article

• What can inexperienced admin expect after server setup completed seemingly fine? [closed]

  - by Miloshio

  Inexperienced person seems to have done everything fine so far. This is his very first time that he is the only one in charge for LAMP server. He has installed OS, network, Apache, PHP, MySQL, Proftpd, MTA & MDA software, configured VirtualHosts properly (facts because he calls himself admin), done user management and various configuration settings with respect to security recommendations and... everything is fine for now... For now. If you were directing horror movie for server admin above mentioned what would you make up for boogieman that showed up and started to pursue him? Omitting hardware disaster cases for which one cannot do anything 'from remote', what is the most common causes of server or part-of-server or server-related significant failure when managed by inexperienced admin? I have in mind something that is newbie admins very often missing which is leading to later intervention of someone with experience? May that be some uncontrolled CPU-eating leftover process, memory-related glitch, widely-used feature that messes up something unexpected on anything like that? Newbie admin for now only monitors disk-space and RAM usage, and number of running processes. He would appreciate any tips regarding what's probably going to happen to his server over time.

  Read the article

• How to set up Windows 7 Professional as a NAS

  - by Enyalius

  I searched and didn't find any answers, so please forgive me if this is a repeat. Anyway, I have an older computer that I'm using as an HTPC, and I was hoping that I could use it as a NAS/multimedia server, as well. My primary uses would include accessing content on my PS3 (same LAN), accessing content from other computers on my home network and (if I can) accessing content from my Android phone over the internet. I have used SubSonic to stream music to my Android phone and other computers before, but I would really like to find a way to do this natively if possible. I know that I can buy external hard disk cases that can plug in the USB port of my router, that I can get a Drobo or other network storage solution, but I would really just rather not spend the money (especially considering that I already have a computer that I should be able to use). Hardware involved: Apple AirPort Extreme base station router (most recent revision) Home Theater Personal Computer: Core 2 Duo @ 2.4GHz, 8GB DDR2 RAM, ~3.5TB hard drive space Sony Playstaiton 3 Thin 120GB HTC Thunderbolt (I have 4G coverage) rooted and running Android 2.2.1 Various Apple laptops Various Windows 7 desktops/laptops Thanks in advance! Note- I have looked at open source NAS software but I would like to preserve the Windows Media Center functionality in Windows 7, so other NAS software is not an option for me currently. .

  Read the article

• Hibernation fails; The system cannot find the file specified

  - by GMMan

  Recently I installed Ubuntu 12.04.1 LTS on my Lenovo Y480. Hibernation was working properly after the Ubuntu install, but I was making sure all of the operating systems on my system worked, including OneKey Recovery (recovery partition). It is of note that I installed Windows 7 from scratch with a disk image I downloaded off of my university's DreamSpark program, and further to that I had to image the partition with Paragon Backup & Recovery, repartition to convert the Windows partition to extended, install Ubuntu, and then restore the image. During that process I also used the Windows disc to edit the BCD as to reuse the existing entry for the restored partition. I also used the automated "repair your computer" option. With verification, I noticed that the "repair your computer" option actually wrote to the wrong BCD (the recovery partition), and I mounted the partition and restored the original BCD (from a copy I made earlier), and rebooted. At this point my GRUB broke, and I was able to restore it. At this point hibernation broke. I tried powercfg /h off and powercfg /h on, rebooted, and nothing. Also tried increasing the hibernation file size as directed on this post, but it still doesn't work. Executing shutdown /h yields The system cannot find the file specified.(2). What file? It seems that mounting the system partition sometimes works, but I don't want to keep it mounted in case it gets written to accidentally. How do I permanently fix this?

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• Clone a Windows Installation to a 3TB Hard Drive; MBR to GPT

  - by DanBlakemore

  I have Windows 7 Professional 64-bit installed on my desktop. Unfortunately for me and my wallet my hard drive is failing. I have purchased a 3TB hard drive as a replacement for my current 2TB drive. I would like to avoid as much hassle as possible in moving to this new drive so I would like to copy my current partition to the new drive using Gparted. The problem is that I suspect that my current partition is MBR, and I need GPT on my new drive since it is 3TB. Can I simply copy the MBR partition onto the new disk and then convert it to GPT after the fact (can you even convert the type of a partition)? Or would I need to somehow copy the contents of the partition into a GPT partition on the new drive? How do I go about making this transistion? Also, are there any issues I should be wary of booting to a GPT partition? If it matters, my motherboard is 1 year old as of May, 2012. Edit: My motherboard is 1 day old. My old one does not have UEFI compatibility, so I decided to make an upgrade to Intel today given that I would need a UEFI motherboard to use my new HDD. How much can I use a dying hard drive (bad sectors according to Hitachi Drive Fitness Test)? I have assumed not at all, to be safe.

  Read the article

• Windows Vista freezes

  - by Kakurady

  Windows Vista (32-bit) would randomly freeze on my computer, usually 15-30 minutes after login but can happen just after login. All applications would stop responding and the hard drive will not make any sound, and after a while, the mouse cursor will also stop moving. I dual-boot Ubuntu, and that still works fine. It started with the computer freezing when loading Team Fortress 2. Alt-Tab and Ctrl-Alt-Del have no effect, and the hard drive does not make any sound. I tried to verify the game data using Steam and that freezes the computer too. So I stupidly reinstalled the game. Now the game doesn't freeze when it starts, but instead the whole computer randomly freezes. This computer is a Dell XPS M1530 with a 320GB (298GiB) drive (WDC WD3200BEVT-7) split 5-ways, with Windows and Linux a partition each, one more for Linux swap space, and another two partitions for Dell diagnostic program and factory image and drivers. There was once where the hard drive would make clicking noises all day, and only stopped when I rebooted the computer. Since then, the BIOS diagnostics would fail the drive (for "self-test log contains previous errors") whenever ran. (The on-disk diagnostics cannot be run because I overwrote the MBR with GRUB.) Naturally, I thought the hard drive could be the problem. CHKDSK found one bad sector, but this seems to have no effect. System File Checker found two protected files with wrong hashes, one is some kind of IE manifest, and the other is a tcpmon.ini. Neither of them can be restored because their back up copy also have wrong hashes. Nothing about system failures in the event viewer. What should I do next?

  Read the article

• Problems creating a functioning table

  - by Hoser

  This is a pretty simple SQL query I would assume, but I'm having problems getting it to work. if (object_id('#InfoTable')is not null) Begin Drop Table #InfoTable End create table #InfoTable (NameOfObject varchar(50), NameOfCounter varchar(50), SampledValue float(30), DayStamp datetime) insert into #InfoTable(NameOfObject, NameOfCounter, SampledValue, DayStamp) select vPerformanceRule.ObjectName AS NameOfObject, vPerformanceRule.CounterName AS NameOfCounter, Perf.vPerfRaw.SampleValue AS SampledValue, Perf.vPerfHourly.DateTime AS DayStamp from vPerformanceRule, vPerformanceRuleInstance, Perf.vPerfHourly, Perf.vPerfRaw where (ObjectName like 'Logical Disk' and CounterName like '% Free Space' AND SampleValue > 95 AND SampleValue < 100) order by DayStamp desc select NameOfObject, NameOfCounter, SampledValue, DayStamp from #InfoTable Drop Table #InfoTable I've tried various other forms of syntax, but no matter what I do, I get these error messages. Msg 207, Level 16, State 1, Line 10 Invalid column name 'NameOfObject'. Msg 207, Level 16, State 1, Line 10 Invalid column name 'NameOfCounter'. Msg 207, Level 16, State 1, Line 10 Invalid column name 'SampledValue'. Msg 207, Level 16, State 1, Line 10 Invalid column name 'DayStamp'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'NameOfObject'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'NameOfCounter'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'SampledValue'. Msg 207, Level 16, State 1, Line 22 Invalid column name 'DayStamp'. Line 10 is the first 'insert into' line, and line 22 is the second select line. Any ideas?

  Read the article

• Restore a database with LDF file only

  - by Martin

  First of all, i know how stupid it is not to have a any backup. I can't help it, but i have to (try) to solve it. I have a transaction log (LDF) file from a SQL Server 2000 database that contains all transactions since the creation of the database. No truncation has been done. The MDF file is gone. Probably because of some disk failure. There is no backup. Not from the original database and not from the transaction log. I have tried to link the transaction log to a new clean database. But (ofcourse) that failed because SQL Server checks the identity of both files. I have read about software that can read the transaction log. ApexSQL seems to do that. I tried to install the trial version but it gives weird errors when trying to start the program. Anyone knows a solution for me? It may contain third party software, but i prefer a clean SQL Server solution.

  Read the article

• Software for RAID Failure Alerts?

  - by QF_Developer

  I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

  Read the article

• Cannot get at data in my NAS

  - by Ben

  I've got a bit of an issue that I'm hoping you can help me with. I have an Iomega ix4 as my NAS. This runs Linux and each drive in the box has 2 partitions: one for the OS and RAID info, and the second for the actual data. I had it configured as RAID5. Recently one of the drives failed. At this point all of the data was available, it was just reporting a failed drive. I had a drive of the same capacity (although not the exact same spec) which I swapped in place of the failed drive. It recognised it, and started to rebuild the data protection. So far so good ... or so I thought. The next day, after data protection had finished reconstructing, the NAS was telling me that 4 new drives had been added, and wanted confirmation to overwrite the data. Obviously I declined to do this. I swapped the failed drive back in again, in the hope that it would return to its previous state of the data being accessible, but one failed disk. However it didn't - it still tells me that the NAS has 4 new drives in it. I am hopeful that the actual data is untouched, so what I need to do is get it to rebuild the RAID without touching the data on the disks. I have ssh access, and have run stuff like mdadm --examine to see what I can find. The mdadm.conf file has no entry in the "definitions of existing MD arrays" section. I have not run any actual rebuilding commands as yet, because this is entering an area which I am out of my depth in. Please can someone advise the best way of getting my data? Thanks.

  Read the article

• What does SQL Server's BACKUPIO wait type mean?

  - by solublefish

  I'm using Sql Server 2008 ("R1"), with some maintenance plans that back up my databases to a network share. Some of my backup jobs show long waits of type "BACKUPIO". Of course it seems like this is an I/O subsystem limitation, but I'm skeptical. Perfmon stats for I/O on the production (source) server are well within normal trends for that server. The destination server shows a sustained 7MB/s write rate, which seems incredibly low, even for a slow disk. The network link is gigabit ethernet and nowhere near saturated. The few docs I've turned up about BACKUPIO indicate that it's not specifically a wait on I/O, surprisingly enough. This MSFT doc says it's abnormal unless you're using a tape drive, which I'm not. But it doesn't say (or I don't understand) exactly what resource is missing. http://www.docstoc.com/docs/24580659/Performance-Tuning-in-SQL-Server-2005 And this piece says it's not related to I/O performance at all. http://www.informit.com/articles/article.aspx?p=686168&seqNum=5 "Note that BACKUPIO and IO_AUDIT_MUTEX are not related to IO performance." Anyway, does anyone know what BACKUPIO actually means and/or what I can do to diagnose or eliminate it?

  Read the article

• Windows 8 install from USB freezes

  - by Rafael Almeida

  I'm trying to install Windows 8 from an 8GB Kingston Data Traveler. I'm currently using the Windows 7 USB DVD Download Tool to put the iso into the flash drive. It copies the files, but in the end it says it 'had a problem with bootsect' and could not make the flash drive bootable. This seems to be because my current system is Windows 7 32bits, and the bootsect.exe in the ISO is a 64-bit executable. Then I downloaded the 32-bit bootsect.exe and made the drive bootable by running: bootsect /nt60 E: /mbr Then I restarted and managed to boot via the flash drive, but now everything is very slow. It takes about two minutes for the initial black screen with the Windows logo and the spinner go away, then it goes to a purple-ish blank screen that stays on for about five more minutes and then it finally shows a dialog asking for the installation, date/time and keyboard languages. I input then, click "Install Now" and it takes about three more minutes with a "Setup is starting" screen. After that, the PC apparently reboots, the CPU fan speeds up considerably, and there's no video and nothing more happens even after more than ten minutes. What is happening? I already tried using another USB port and even installing from a Samsung G3 Station 2TB external hard disk, but the same thing happens. The file transfer speed to the Kingston drive was about only 3 megabytes per second.

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• Is it possible to to create a live linux iso containing a win xp virtual machine?

  - by mark

  I would like to have a Linux live system that contains a Windows xp virtual machine. This would be run from a bootable USB flash drive. My attempts so far have been unsuccessful. I created a Lubuntu 12.04 virtual machine with VMware. I updated and configured it to my needs, and installed Virtualbox. I then created a Windows xp vm with Virtualbox in the Lubuntu vm. I tested everything and everything worked, including USB devices. I installed Remastersys in the Lubuntu vm, copied the xp vm folder to the /etc/skel folder then created the custom iso with remastersys. I burned the iso and tested it on a laptop. It worked flawlessly. All programs and wireless networking worked. My problem was the xp vm. Virtualbox started fine but would not run the vm. I have the following error: Result Code: NS_ERROR_FAILURE (0x80004005) Component: VirtualBox Interface: IVirtualBox {c28be65f-1a8f-43b4-81f1-eb60cb516e66}. I ran remastersys again changing the permissions on the skel folder to R W for everyone. I also logged into Lubuntu as root and ran remastersys again. Each iso I created worked fine but would not start the xp vm inside. The last attempt virtualbox gave me an access error stating it can not access the virtual disk. Is what I want to do possible? In theory I don't see why it would not work. Is it a permissions issue? Should I create the iso then add the xp vm after by editing the iso by hand? Using a vm and not real hardware as a build machine a problem? Any ideas? keep any responses in laymens terms. I am still a Linux novice.

  Read the article

• i7-980X at 70% speed

  - by Buxley

  Hi we bought a nice computer to use to solve optimization problems. Intel i7-980X@3,33 GHz with 12 GB of Team Group 1600 MHz DDR3 RAM. When we use Gurobi the computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an i7 930 all cores are at a near 100% level even after longer solution times. We first thought that the Hard disk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of RAM we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

  Read the article

• Windows Server 2008 R2 Standard to Enterprise Problems

  - by boburob

  A few months ago I setup a Citrix XenApp cluster running on Windows Server 2008 R2 Standard Edition using the temporary 180 day license key. Recently the company bought a Windows Server 2008 R2 Enterprise DataCenter license. This means I need to upgrade the Windows edition from Standard to Enterprise. I attach the disk to the VM and start the upgrade process through XenCenter, it runs through all checks and unpacks all Windows files and seems to create a Windows Setup partition, it then reboots and trys to boot into this partition and I get a blue screen telling me to CHKDSK the hard drive with the following error message: STOP: 0x0000007B As XenApp is already setup and working I really do not want to go down the route of rebuilding this server (as I already had to do this once down to issues with XenApp). The server did have 8GB of RAM assigned to it, I have tried reducing this down to 2GB's as I read this can cause an issue. Also I can boot back into the Windows Server 2008 R2 Standard partition without any problems. UPDATE I have managed to get round the urgency by re-arming the license, giving me another 180 day trial..but would be nice to work out why this is happening!

  Read the article

• How to recover Windows Password without reinstalling if you forgot Windows password?

  - by user38908

  Usually, we can recover Windows admin password in two traditional ways. The first is to change Windows password with another admin account; the second is to recover the previous password with the windows password reset disk that had been created before you forgot the password. Take Windows XP for example, 1 At the Windows XP login prompt when the password is entered incorrectly click the reset button in the login failed window. 2 Insert the password reset diskette into the computer and click Next. 3 If the correct diskette Windows XP will open a window prompting for the new password you wish to use. However, we offen ignore the important of security until we have been locked out of computer. Fortunately, there is still the last way that can unlock your computer without reinstalling - erase Windows password with Windows password reset CD, which can recover admin password for Windows 7/XP/Vista/NT/2000/2003.... Take Windows Password unlocker for example, followings are the steps to create the reset CD 1.Download Windows Password Unlocker from Password Unlocker Official site 2.Decompress the Windows password unlocker and note that there is an .ISO image file. Burn the image file onto an blank CD with the burner freely supported by Password Unlocker. 3.Insert the newly created CD into the locked computer and re-boot it from the CD drive. 4.After launched the CD, a window pop up with all your account names(if you have several accounts) select one of the accounts that you have forgotten its password to reset it. Just one press, this software can remove Windows password instantly.

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Network driver for Hyper-V restore from Windows Home Server

  - by Philipp Schmid

  I have backed up Windows Server 2008 running virtualized on Hyper-V to a Windows Home Server 2008 SP1 (I know I should have backed up the VHD instead). Now I need to restore the contents of the VM from WHS. I have created a restore CD ISO and used it to create a new VM. It all works as advertised up to the point where the restore process wants to load the network drivers (it only finds 4 disk drivers on the restore CD. but no network drivers). So I created a virtual floppy and copied the contents of 'Home Server Drivers for Restore onto it. But no luck! I have tried moving the 4 subdirectories into the root of the floppy, but that didn't work either. Finally, I started another instance of the WS 2008 to identify the network driver that the virtualized instance is using (%WINDOWS%\system32\drivers\netvsc60.sys) and copied that file onto the virtual floppy, without success. Does anyone have any suggestions on how to get networking working on a Hyper-V instance running off the Windows Home Server Restore CD? UPDATE: As suggested by delenda, I have added a legacy network adapter to my VM, and indeed I now get a network driver listed! However, the WHS it still not found, even after entering the home server name manually. PHS

  Read the article

• Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. From their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• maximum size filesystem on my test .... approach?

  - by jocco

  Hello all I'm new at the site, and I have a question. I got this question at a test and really like to know the correct approach to solving this problem? Here is the question. In an indexed filesystem the first indexblock (inode) has 12 direct pointers and 1 pointer to an indirect indexblock. The filesystem is implemented on a disk with a diskblock-size of 1024 bytes. All pointers are 32 bit. Question: what is the maximum filesize (Kilobytes) of this filesystem? If it's possible not an just an answer but an explanation. edit: It was a multiple choice btw with 4 answers a. 13 K b. 268 K c. 524 K d. 1036 K As for my approach I only got as far as to know that 1 pointer is 32 bit Also I found something else here on the site which seems very usefull. http://stackoverflow.com/questions/2755006/understanding-the-concept-of-inodes Ok i got this far There are 12 blocks and each block is 1024 bytes. 1024 * 12 = 12288 bytes or 12 KB directly accessible. Please correct me if I'm wrong. Each pointer is 32 Bit = 4Byte And to be honest at this point I'm starting to get confused especially since my answer is way over any of my multiple choice answers.

  Read the article

• Cannot install windows. Compaq Presario CQ62

  - by Matthew

  I bought a used Compaq Presario CQ62 for cheap, and went to install windows on it. I formatted the partition and went to install when I got this error.... Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available and restart the installation. Error code: 0x80070017 I have used this disk before with no problems, but internet searching suggested I burn one at 2x speed because that helps for some reason... I'm burning one now, but my question is, why would I get this error, OTHER than the disc being bad? I'm pretty certain this one isn't as I have used it before... (ok so the slowly burned cd (using imgburn) didn't work either so it's DEFINITELY not the disc) Thanks in advanced for any answers Also I took one stick of ram out because internet searching also suggested that, but it didn't make a difference. Also I ran memory and hard drive checks and they passed fine. Also I reset the motherboard options to default What could it be!? Help I'm completely stumped...

  Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >