Search Results

Search found 19915 results on 797 pages for 'software patent'.

Page 610/797 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >

• Motherboard dual gfx power question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Can i use a Windows 2008 r2 Cluster for file redundancy

  - by JERiv

  I'm researching a sever clustering architecture as a redundancy and backup solution for a client, and something that isn't made clear is whether or not i can use server clustering to replace a file server with backup solution. Forgive my Elementary understanding of server clustering but supposing: 2 Sites (NJ, CA) Identical Servers at each site setup as a Remote Site Cluster nodes with Windows Enterprise server 2008 r2 Services: File, Terminal, AD, and maybe DNS Will the following will be true: Files (including data drives) will be synced between the two servers eliminating the need for third party backup/mirroring software to sync/backup files. Also supposing i use roaming profiles w/ folder redirection; How will client computer in the WAN access their data through the cluster (i.e. will they automatically choose the best route)

  Read the article

• Is there a way to save "work sessions" in linux

  - by mike

  I regularly work on different projects, using different software. For project 1 I need to open for ex : Filezilla, Gedit and Nautilus (set to a specific folder) For project 2 I need to open foz ex : Gimp, Nautilus (set to another specific folder) etc. What I would like is a kind of sessions manager, where I could create entries "project 1", "project 2", etc. And with one click or command, open all the softwares I need. Perhaps there's an easy way to write a batch file for this? Any idea is welcome :)

  Read the article

• How much faster is a 64bit CPU than 32bit CPU? [closed]

  - by W.N.

  I just need the result in theory. I'm not an expert in computer architecture, just a software developer. Most of my friends think 64bit-CPU is 2 times faster than 32bit-CPU. But I think 64-CPU is 2 ^ 2 = 4 times faster than 32bit-CPU (in theory). Which is the right answer to this question? And, if there were 128bit-CPU, how many times would it faster than a 32bit-CPU? PS: I searched with Google, and found a link that referred to benchmarks that supported my answer. I've seen a benchmark where 64bit was 4x faster but that was with a particular encryption where the extra registers available made the difference

  Read the article

• Problem installing Ubuntu 14.04 into a laptop using Windows 8.1

  - by AlexanderFreud

  I have used Ubuntu on my LG laptop for several years. I lately bought an Acer Aspire V5 laptop which included Windows 8.1. I don't have any data on it; I would like to just remove it completely (that horrible Windows 8.1) and install Ubuntu. I tried using a USB device with Ubuntu 14.04 (64bit version) saved on it. I changed the BIOS configuration, putting USB device first on boot order, Windows Boot Manager last. When I try to run with USB device it doesn't work. Messages like these show up: System doesn't have any USB boot option. Please select other boot option in Boot Manager Menu. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. insert your windows installation disc and restart your computer 2. choose your language settings, and then click "next" 3. click "repair your computer" If you do not have this disk, contact your system administrator manufacturer for assistance File \ubuntu\winboot\wubildr.mbr Status: 0xc000007b Info: the application or operating system couldn't be load...[?] required file is missing or contains errors. Could someone please write step-by-step procedures to install Ubuntu 14.04 after removing Windows 8.1 ? I already have done a second partition on the hard disk just in case.

  Read the article

• Will learning to use Fedora also teach me my way around Redhat (CentOS)?

  - by Matt Untsaiyi

  I want to dive into the open source world and start using a Linux distro while learning to program. I've looked over the options and it pretty much boils down to Fedora or CentOS. The reasoning behind it is I'm hoping to kill two birds with one stone... Redhat seems to be "the choice" for servers, so I figure as I learn to program, I can also learn my way around Linux... or Redhat more specifically... and get that under my belt too. I want to use Fedora, and be on the frontier of new software (since I'm not doing anything critical), but if it's completely different than Redhat I'd rather just use CentOS. So is it? Or can I use one and know the other?

  Read the article

• Computer restarts infinitely after Bios/Motherboard screen

  - by user13176

  Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

  Read the article

• How to remove a drive from a 2-drive RAID 5 array?

  - by DrSAR

  There is some information available on shape changes in RAID arrays but I'm a little nervous and would like confirmation: Problem: I have 2 500GB drive as software raid 5 (mdadm). I would like to free one of the two drives since RAID-redundancy is for wimps... Can I just mdadm --grow --array-size=1 followed by a mdadm --grow --raid-disks 1? This seems too simple. How would I specify which drive gets freed? Part of the reason for this maneuver is that I don't have additional space to run a backup.

  Read the article

• Can I use applescript to click buttons in background?

  - by Giorgio

  Sorry for this generic and probably bad-written question. I've never programmed in applescript, but I'm quite familiar with other coding language. I'm in the need of clicking on 2 sequential button inside the lobby of a software (when you click the first a popup appears and we should click 'ok'). However things are a little bit more complicated then this because: 1) the lobby of this program isn't in foreground: it's covered by other windows opened. (I don't have experience so I don't know if this represent a problem). 2) there should be a timer and the program should click this button at regular intervals. Is this feasible with applescript?

  Read the article

• Does programmable hardware exist to allow hardware to be programmed by computers?

  - by agentbanks217

  I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build an automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)?

  Read the article

• Maxivista vs. Synergy vs. hardware KVM switches [closed]

  - by GetFree

  I have 2 PCs on my desk, each one with its own screen, mouse and keyboard. And it's a pain moving from one PC to the other (even though they are one foot away from each other). So, it's time to change to different approach: KVM switches. What would you recommend for a setup like mine? I dont need to change monitors since they are both in front of me. I just need a way to change mouse and keyboard. I use Windows on both PCs and money is not an issue if it worth it. What would be the best option for a seamless integration of the two PCs? Edit: What about other software similar to Synergy, like Input Director? What's more convenient in your experience?

  Read the article

• VPN (PPTP) in Virtual Machine (WinXP in VM Workstation 8 )

  - by user1059617

  i am trying to establish a VPN Connection in my GuestOS. But i get a timeout every Time. The Host : Win 7 The Guest: WinXp Software: VM-Workstation 8 The GuestOS is bridged to the Host network and has his own IP. The normal Connection in the GuestOS works fine but when i try to establish the VPN (no Programm used , just simple Windows VPN) i get an timeout? But i can establish the VPN from the Host without any problems... Any Ideas here? Thanks Ps:(If it matters: The VPN is PPTP from StrongVPN)

  Read the article

• Is this a b43 driver problem?

  - by Nullet

  I have 13.04 on a Dell Inspiron 1564 with Broadcom 4312 WiFi card. The wl drivers cause kernel panic on linux-3.8 so I succesfully installed the b43 driver a couple of months ago. Now I have changed ISP and got a new router, and the connection drop when downloading software from internet to a 2008r2 using Remmina Client, and apt-get install on virtual machines in virtualbox. I have no idea why this suddenly became a problem.. My phone does not loose the connection, just Ubuntu. Output from /var/log/syslog after lost connection rfkill list(after disconnecting): 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes I can use NetworkManager to disable wireless and then enable wireless to connect again. rfkill ublock all/wifi/0 removes only Soft blocked. lshw -C network *-network description: Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4:00:78:d2:05 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.8.0-32-generic firmware=478.104 ip=10.0.0.3 link=yes multicast=yes wireless=IEEE lspci 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) After waking from suspend and when booting, it takes about 40 sec to get network connection. This has been a problem all along AND a different question, but I mention it anyway.. cus it's annoying! Please take a look and hopefully someone spot a problem! Thanks!

  Read the article

• How Do I Migrate 100 DBs From One MS-SQL 2008 Server To Another? (looking for automation)

  - by jc4rp3nt3r

  Let me start by saying that I am not a DBA, but I am in a position where I am responsible for moving just under 100 MS-SQL 2008 DBs from our current development server, to a new/better/faster development server. As this is just a local dev server, temporary downtime is acceptable, but I am looking for a way to move all of the databases (preferably in bulk). I know that I could take a bak of each, and restore it on the new server, but given the volume of DBs, I am looking for a more efficient way. I am not opposed to learning a new piece of software, writing code or any other requirement, so long as it speeds up the process.

  Read the article

• Fedora 14 - Error 5 - No space on Disk - After installation.

  - by amitahire

  I am new to Fedora, am still figure my way through it. I was going about tweaking it and preparing it to my needs, While installing through yum I dont have much other than the fact that I have to search for the packages. But when I open "Add/remove software" of Fedora. I am greeted with " No space left on the disk" and when I seek for more details it says " Disk Error :[errno 5] Input/output error" I did some research and I saw that it usually occurs during installation, but here I have successfully installed it. Can someone help me with it? Later on I even had notification of the same warning. And mind you I got loads of free space. Thanks for the help

  Read the article

• How can I make windows not mount a drive when it is plugged in?

  - by heavyd

  Due to my employer's IT policy, I'm not allowed to have any kind of MP3 playing software on my computer. I do however like to plug my iPod into my computer to keep the battery charged during working hours. Normally, I plug the iPod in, Windows mounts the drive, then I have to go in and eject the drive so I can run my iPod normally while still keeping it charged. Is there anyway I can keep Windows from mounting the drive (and this drive only, I still use my USB flash drive a lot) from auto-mounting? Update: Maybe this is more of an iPod issue, but specifically I would like for the iPod to not display the "Do not disconnect" message when plugged in.

  Read the article

• Share files and catelog them across a server

  - by Ultan

  Hi all, here is what I am looking for, I use a number of software packages when creating online learning courses. I have a huge number of courses and they use text, audio files, images and video files. I am looking for somthing that I can install on our server and upload the content, index, tag and categorise and enter a description so that when a screen print has to be changed for example I can find all the places that I used the image so that I can go in and change the image without having to check every file that I have created over the last year. An open source solution would be great or something that isn't to expensive. Thank you for any suggestions you can make.

  Read the article

• Ubuntu is unresponsive and scrolling is very jerky

  - by peterpipe

  I'm new to Ubuntu. I've been using 12.04LTS for over a week now. For 3 days it was great but now I'm having a number of problems. I'm using an Acer Aspire one D255 it has a 250GB HDD and a 1GB Memory. My browser is Firefox. Pages freeze occasionally and I wait for over 10 minutes and have to use the computer's 'off' button. Pages crash. On facebook some pictures don't load and I have to close down and restart a couple of times. Scrolling can sometimes be very jerky. Downloading software has become a problem and I have a 'no entry' sign in the top taskbar. I've looked at this page for some help but the words used and the explanations are not helpful to someone like me who has little knowledge of this. Please - 'Ubuntu for dummies'. I'd like to continue using Ubuntu but am close to giving up.

  Read the article

• How can I get the Android SDK working with Eclipse in Ubuntu 9.10 64-bit?

  - by vulcan99

  I would like to tinker with the Android software development kit, and I have found out that it only support 32-bit versions of the Java Platform and Eclipse. I installed the ia32 Sun Java runtime environment and the 32-bit version of Eclipse. I also used the update-alternatives program to make a java 32-bit preference. Both of these seem to run fine. I also installed the Eclipse android plugins, but my problem lies in the SDK downloaded from Google. When I go to Eclipse preferences and try to tell it about my Android SDK location, there are no SDK targets listed. Has anyone else gotten this running on Ubuntu 9.10 64-bit? Thanks.

  Read the article

• Windows 7 boot error 0xc0000225 after falling down

  - by Hulehule20

  My Toshiba netbook fell down and hasn't booted again. When I start Windows 7 it immediately says: Windows failed to start... Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible. After that, there are a few things to consider: There's a Linux distro Linkat which is also installed in the computer. It starts normally without any problem and it doesn't seem to display any errors when it boots. I restored all computer OSs with clonezilla and some images provided by the manufacturer, and it's done nothing. I have already checked the basic components of the PC (RAM, Hard Disk, WLAN Card) are pluged in and working. My impression is that's all about some broken part inside, though the Linux OS starts normally. Does anyone know a way I can fix this or at least any software for identifying the problem at all?

  Read the article

• exchange server 5.5 stops responding

  - by user57221

  From last couple of weeks I am getting connection problem with my in-house exchange server 5.5 running on windows 2003. It has been working fine from last 5 years. but from few weeks it is loosing connection with other outlook clients. I have to restart my exchange server to make it work. This happens few times in a week. It looses connection somewhere between 7PM to 8AM as when I come in office. I find this problem, while it leave office it works fine. We have not installed any updates or software since last more than 2 years. What could be the reason for stop working?

  Read the article

• libapt-inst1.4:i386 fais to install

  - by user92834

  Today I was notifed of updates, some of them being libapt. So I press "Install Updates", and I got this error: The following packages have unmet dependencies: libapt-inst1.4:i386: Depends: libapt-pkg4.12 (>= 0.8.16~exp12ubuntu10.2) but 0.8.16~exp12ubuntu10.3 is installed Depends: libc6 (>= 2.4) but 2.15-0ubuntu10 is installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.6.3-1ubuntu5 is installed Depends: libstdc++6 (>= 4.4.0) but 4.6.3-1ubuntu5 is installed So I open the terminal and typed sudo apt-get install -f I was shown this: The following extra packages will be installed: libapt-inst1.4 libapt-inst1.4:i386 libapt-pkg4.12:i386 The following NEW packages will be installed: libapt-pkg4.12:i386 The following packages will be upgraded: libapt-inst1.4 libapt-inst1.4:i386 2 upgraded, 1 newly installed, 0 to remove and 18 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,146 kB of archives. After this operation, 3,031 kB of additional disk space will be used. Do you want to continue [Y/n]? I selected "yes". And then: E: Internal Error, No file name for libapt-pkg4.12 Also, when I open the software center, I get a message that the database is broken... I'm using 12.04 64bit But why it wants to install the i386 version? I'm using 64 bit ubuntu...

  Read the article

• Do any of the HP printers have implement printer sharing?

  - by BCS

  I've seen several (home grade) HP prints that have network port and allow connecting to them via that. However I haven't seen any way to use it without installing the printer specific drives. This seems a bit silly because I've seen printer sharing system (SMB I think) that didn't seem to need any printer specific software. My question is: Is there a way to use one of these with my printers? (I'm omitting the exact model in the hopes that answers for several models (or a resource that answers it for several models) will be given.)

  Read the article

• Creating fillable PDF form with dynamically updated fields

  - by Aputsiaq

  Is there a way to create fillable PDF forms where a set of fields gets their data when one of the fields is filled out? The normal use case would be application form, where your name or membership number has to be entered on the top of each page. I am using LibreOffice 3.5.4.2. In a earlier version I was able to get the desired effect if I left the field names to be the same (i.e. the field names as seen in the Form Navigator). I'm open for using any free software tool. There is a similiar question asked elsewhere at ask.libreoffice.org.

  Read the article

• Mobile (Portable) Website

  - by johnny_s

  I have an online presentation to do next week and I have it all ready to go. The website is html and css only (no db), and currently resides on my shared hosting account. Now although my shared hosting is (relatively) reliable, I have noticed that recently they have been making some changes and my website has been unavailable at times. I don't want this to happen to me on the morning of my presentation, so I am asking what is the best way to prepare for such a thing? My domain is www.presentation.mydomain.com and I would like to keep this if possible (even if issues arise). I have been thinking of a few alternatives; host my site on two different domains or servers (but what about domain name)? have a portable XAMPP version on a USB (again, domain name)? possible fail-over site/location? Any advice or suggestions are welcome. Update Presentation will be carried out on their laptop, not mine. So I am unable to install any software.

  Read the article

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617  | Next Page >